Model Airplane News

TOP GUN FAVORITE MARK CHAPMAN’S ⅓-SCALE ALBATROS D.VA

ugh Ryder: The Albatros D.Va was manufactured by the Albatros Company. It was built in their factory by boat builders and cabinet makers because the bulkheads and the outer skins were all birch, like a boat.

You’re reading a preview, subscribe to read more.

More from Model Airplane News

Model Airplane News6 min read
Keep It Legal
As numerous uncrewed aircraft of all types are being rapidly produced, tested, and flown, the Federal Aviation Administration is working hard to get a handle on this with the introduction of various rules and regulations. These actions will have a di
Model Airplane News2 min read
Making A Simulated Sprayer
Since the all the sprayer components have hollow entry and exit points, I decided to see if I could arrange some sort of simulated chemical spraying effect. This would involve adding a smoke system and diverting the engine exhaust through the “spraye
Model Airplane News2 min read
Pilot projects
SHOWCASING WHAT YOU BUILD & FLY | EMAIL ENTRIES TO: MAN_AIRAGE.COM Frank scratch built his rocket-powered glider model from 3mm and 6mm Depron foam. The model is designed using based on a 3-view drawing that he scaled up by hand. The 42-inch-long pla

Related