0 penilaian0% menganggap dokumen ini bermanfaat (0 suara)
138 tayangan1 halaman
The document describes a directory on a CD-Rom containing AutoCAD drawings of standard Conley FRP pipe fittings in various sizes that can be inserted into drawings. It provides the file naming convention for the drawings, which indicates the fitting number, material code, size in inches, and drawing view. A list of the types of fittings included in the drawings is also provided, ranging from pipes and elbows to tees, crosses, saddles and laterals in sizes from 1/2 inch to 30 inches.
The document describes a directory on a CD-Rom containing AutoCAD drawings of standard Conley FRP pipe fittings in various sizes that can be inserted into drawings. It provides the file naming convention for the drawings, which indicates the fitting number, material code, size in inches, and drawing view. A list of the types of fittings included in the drawings is also provided, ranging from pipes and elbows to tees, crosses, saddles and laterals in sizes from 1/2 inch to 30 inches.
The document describes a directory on a CD-Rom containing AutoCAD drawings of standard Conley FRP pipe fittings in various sizes that can be inserted into drawings. It provides the file naming convention for the drawings, which indicates the fitting number, material code, size in inches, and drawing view. A list of the types of fittings included in the drawings is also provided, ranging from pipes and elbows to tees, crosses, saddles and laterals in sizes from 1/2 inch to 30 inches.
There is a directory on this CD-Rom labeled ÒBLOKDWGS.
Ó Within this directory are standard
Conley FRP Fitting drawings in AutoCAD Release 14 Format for your use. You may insert these blocks into your drawings. The part numbering is as follows: Example: 100-XXX-1_1-2side.dwg Where: 100 = the fitting number XXX = material code 1_1-2 = fitting size in inches; i.e. 11⁄2Ó side = the drawing view; front, side, back, end, top, and bottom
Block drawings included are:
Pipe, 1.2Ó through 30Ó #100 Cement 90 Ell, 1⁄2Ó through 30Ó #101 Flanged 90 Ell, 1⁄2Ó through 20Ó #102 Cement 45 Ell, 1⁄2Ó through 20Ó Ò #103 Flanged 45° Ell, 1⁄2 through 20Ó #104 Cement Tee, 1⁄2Ó through 30Ó #105 Flanged Tee, 1⁄2Ó through 30Ó #106 Flange, 1⁄2Ò through 30Ó #112 Cement Cross, 1⁄2Ó through 30Ó #113 Flanged Cross, 1⁄2Ó through 30Ó #114 Cement Saddle, 2Ó through 30Ó #114F Flanged Saddle, 2Ó through 30Ó #119 Cement Lateral, 1Ó through 30Ó #120 Flanged Lateral, 1Ó through 30Ó #122 Cement Coupling, 1⁄2Ó through 30Ó CONTENTS
A Guide to Motor Boat Design and Construction - A Collection of Historical Articles Containing Information on the Methods and Equipment of the Boat Builder
Daftar Perbedaan Gambar Tender Vs Forcon "Struktur" NO. Gambar Kontrak/Tender Gambar Forcon No. Gambar Judul Gambar Keterangan No. Gambar Bore Pile Pergeseran Bore Pile