Anda di halaman 1dari 56

Fittings

Handbook

INDEX
Legenda
PVC-U Fittings

PVC-C Fittings

PP-H Fittings Socket Fusion

PP-H Fittings Butt Welding

PVDF Fittings

Pipe Clips

Material Specifications and Technical Data


Approvals and Quality Marks
Fittings for solvent welding - Equal
Fittings for solvent welding - Reducers
Threaded fittings - Equal
Threaded fittings - Reducers
Adaptor fittings
Tank connectors
Hose adaptors
Stubs
Flanges
Material Specifications and Technical Data
Approvals and Quality Marks
Fittings for solvent welding - Equal
Fittings for solvent welding - Reducers
Adaptor fittings
Stubs
Flanges
Material Specifications and Technical Data
Fittings for socket fusion - Equal
Fittings for socket fusion - Reducers
Fittings for socket fusion - Adaptors
Fittings for socket fusion - Hose adaptors
Fittings for socket fusion - Stubs
Flanges
Material Specifications and Technical Data
Fittings for butt welding - Equal
Fittings for butt welding - Reducers
Fittings for butt welding - Adaptors
Fittings for butt welding - Stubs
Flanges
Material Specifications and Technical Data
Fittings for socket fusion - Equal
Fittings for socket fusion - Reducers
Stubs
Flanges

page 4
page 5
page 6
page 8
page 11
page 13
page 15
page 16
page 22
page 23
page 24
page 26
page 27
page 28
page 29
page 31
page 32
page 35
page 35
page 36
page 37
page 39
page 39
page 40
page 41
page 41
page 42
page 43
page 45
page 47
page 47
page 48
page 50
page 51
page 53
page 54
page 54
page 55

Fittings
Handbook
Fittings Handbook is a new tool
that resumes all FIP fittings range.
All types and versions available
in a glance as well as their main
technical details.

This handbook is intended as


practical quick reference.
It does not substitute FIP
catalogues which are the official
reference for the products data.

LEGENDA

Nominal outside diameter of the pipe in mm

Thread size

DN

Nominal internal diameter in mm

PN

Nominal pressure (max working pressure at 20C - water)

MOP

Maximum Operating Pressure

SDR

Standard Dimension Ratio (pipe outside diam./pipe


thickness)

PVC-U

Unplasticized polyvinylchloride

PP-H

Homopolymer polypropylene MRS-10

FRP

Fiberglass Reinforced Plastic

PVC-C

Chlorinated polyvinylchloride

PVDF

Polyvinylidene fluoride MRS-25

n.a.

Not available

Pressure
conversion

16 bar = 232 psi


10 bar = 150 psi
6 bar = 87 psi
4 bar = 58 psi
class E = 15 bar
class D = 12 bar

working pressure

bar

20

16
14
12
10
8
6
4
2
0

40

60

80 100 C

PVC-U

working temperature

PVC-U Fittings
Material Specifications and Technical Data
MATERIAL

PVC-U Unplasticized Polyvinyl Chloride

COLOUR

ISO METRIC SERIES: Grey - RAL 7011


ASTM SERIES: Grey (SCH 80); White (SCH 40)

STANDARDS

Solvent welding ISO METRIC size according to:


ISO 727, EN 1452, DIN 8063, ISO 15493, ISO 4422, BRL-K504, BRL-K502
Solvent welding plain inch according to:
BS 4346/1, coupling to pipes complying with BS 3505-3506,
Solvent welding ASTM INCH size according to:
ASTM D 2466 D 2467 coupling to pipes complying with ASTM D 1785
Parallel threads according to: UNI ISO 228/1, DIN 2999, BS 21, ISO R7
Flanging according to: ISO 7005, DIN 8063, DIN 2501, EN 1452, UNI EN 1092-1

RANGE

Fittings for Solvent Welding:


ISO METRIC sizes: from d12 mm to d315 mm
BS sizes: from d up to d8
ASTM sizes: d10and d12
Threaded Fittings: from R3/8 up to R4

MAXIMUM WORKING
PRESSURE

16 bar (232 psi) with water at 20 C (68 F)


In case of different working conditions see technical catalogue

WORKING TEMPERATURE
RANGE

From 0 C (32 F) to 60 C (140 F)

Pressure / Temperature rating for water


and harmless fluids to which the material
is resistant.
In the other cases a reduction of the rated
PN is required.

Unplasticized PVC-U is suitable to be used in contact with foodstuff and drinking water conforming to national D.M. n.174 - 06/04/2004
Italian Department of Health and international rules and regulations in force.
For technical details, please, see FIP catalogues or visit our web site www.fipnet.it.

Approvals and Quality Marks


Type UNI

from up to mm

PN

Commercial
name

Socket-union B

16 63

16

BIV

Tee 90

20 160

16

TIV

Elbow G 90

16 160

16

GIV

Elbow 45

20 160

16

HIV

Socket M

16 160

16

MIV

Bend C 90

20 110

16

SIV

Bend C 90

160

10

SIV

Reducer R

16 x 12 110 x 90

16

RIV

Reducer RC

20 x 16 160 x 140

16

DIV

End cap CL

20 110

16

CIV

Backing Rings

20 160

16

ODV

Stub Flange

20 160

16

QPV

FIP PVC-U fittings are acknowledged by Germanischer Lloyd to be used on board


where fire endurance test according to IMO RES. A.753 is not required. Certificate
No. 12 283-98 HH
FIP PVC-U valves and fittings are acknowledged by RINA (Registro Italiano Navale)
to be used for the following service on board: domestic water systems (cold sea and
fresh water), scupper and sanitary discharges. Certificate No. MAC /36401/TO/01

Approvals and Quality Marks


FIP PVC-U fittings are acknowledged by KIWA (Keurings Institut voor Waterleiding
Artikelen Holland). Certificate No. K 5034/01

FIP PVC-U fittings are acknowledged by NF-CSTB / AFNOR.


Certificate No. 04-1-P-27

FIP PVC-U fittings are acknowledged by IRH for ACS Certificate N. 05 MAT NY 006

FIP PVC-U fittings are acknowledged by WRAS (Water Regulation Advisory


Scheme - UK) Certificate N. M103019

FIP PVC-U valves and fittings are acknowledged by Bureau Veritas - Marine
Division, to be used for the following service on board: domestic water systems
(cold sea and fresh water), scupper and sanitary discharges and non-essential
systems. Certificate No 07123/CO BV
FIP PVC-U valves are certified in accompliance with Ucrainian hygienic, safety and
quality regulation. Certificate No UA1.094.0052575-04

FIP PVC-U fittings ASTM size are acknowledged by NSF (National Sanitation
Foundation) Certificate N. 11370/11370A

Fittings for solvent welding - Equal


d [mm]
SIZE [inch]
ISO-METRIC
PVC-U
for solvent welding
BS-INCH
PVC-U
for solvent welding
SIZE [inch]
ISO-METRIC/ BS-INCH
PVC-U
for solvent welding

Double socket

12

16

20
1/2"

25
3/4"

32
1

40
50
63
1 1/4" 1 1/2" 2"

75
90
2 1/2" 3"

110
4"

140
5"

160
6"

180

200

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

n.a.

n.a.

class E class E class E class D class E class E class D class E class E n.a.
20x1/2" 25x3/4" 32x1"

n.a.

n.a.

d [mm]
SIZE [inch]
ISO-METRIC
PVC-U
for solvent welding
BS-INCH
PVC-U
for solvent welding

PN16

40x11/4" 50x11/2" 63x2"

PN16

75x21/2" 90x3"

280
10

315
12

Type

PN16* PN16* PN10

PN10

PN10

MIV

12

16

250

class D n.a.

n.a.

class D n.a.

n.a.

n.a.

MLV

n.a.

n.a.

n.a.

n.a.

n.a.

MILV

110x4"

class E class E class E class E class E class E class E class E class E n.a.

n.a.

End Cap

n.a.

* reduced safety factor

20
1/2

25
3/4

32
1

40
50
63
1 1/4 1 1/2 2

75
90
2 1/2 3

110
4

140

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

n.a.

n.a.

class E class E class E class E class E class E class E class E class E n.a.

d [mm]
SIZE [inch]
ISO-METRIC
PVC-U
for solvent welding
BS-INCH
PVC-U
for solvent welding

PN16

225
8"

PN16

PN16

PN16

160

180

200

225
8

250

280

315
Type

PN16

n.a.

n.a.

PN10

n.a.

n.a.

n.a.

CIV

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

CLV

160

180

200

225

250

280

315

Socket union

12

16

20
1/2"

25
3/4"

32
1

40
50
63
1 1/4" 1 1/2" 2"

75

PN16

PN16

PN16

PN10

PN16

PN16

90

110

140

Type

PN16

PN16

PN16

n.a.

n.a.

class E class E class E class E class E class E n.a.

PN6

PN6

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

BIV

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

BLV

Note: O-Rings available: see FIP Price lists and catalogues

Fittings for solvent welding - Equal


d [mm]
SIZE [inch]
ISO-METRIC
PVC-U
for solvent welding
BS-INCH
PVC-U
for solvent welding
ASTM-INCH
PVC-U
for solvent welding

Elbow 90

12

16

20
1/2"

25
3/4"

32
1

40
50
63
1 1/4" 1 1/2" 2"

75
90
2 1/2" 3"

110
4"

140
5"

160
6"

180

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16* PN16* PN16* PN10

n.a.

n.a.

class E class E class E class D class E class E class D class E class E class E class D n.a.

ASTM-INCH
PVC-U
for solvent welding

PN16

n.a.

250

class D n.a.

280
10"

315
12"

Type

PN10

PN10

GIV

n.a.

n.a.

GLV

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

SCH40 SCH40

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

SCH80 SCH80

Bend 90

GAV

* reduced safety factor

12

16

20
1/2"

25
3/4"

32
1

40
50
63
1 1/4" 1 1/2" 2"

75
90
2 1/2" 3"

110
4"

140
5"

160
6"

180

200

225
8"

250

280
10"

315
12"

Type

n.a.

n.a.

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16* n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

SIV

n.a.

n.a.

class E class E class E class E class E class E n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

SLV

280
10"

315
12"

Type

d [mm]
SIZE [inch]
ISO-METRIC
PVC-U
for solvent welding
BS-INCH
PVC-U
for solvent welding

PN16

225
8"

n.a.

d [mm]
SIZE [inch]
ISO-METRIC
PVC-U
for solvent welding
BS-INCH
PVC-U
for solvent welding

PN16

200

PN16

PN16

n.a.

Elbow 45

12

16

* reduced safety factor

20
1/2"

25
3/4"

32
1

40
50
63
1 1/4" 1 1/2" 2"

75
90
2 1/2" 3"

110
4"

140
5"

160
6"

180

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN4

n.a.

n.a.

PN16

PN16

PN16

PN16

PN16

PN16

n.a.

n.a.

class E class E class E class D class E class E class D class E class E n.a.

200

225
8"

250

PN10

PN10

PN10

PN10

PN10

HIV

n.a.

n.a.

n.a.

n.a.

n.a.

HLV

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

SCH40 SCH40

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

SCH80 SCH80

HAV

Fittings for solvent welding - Equal


Tee 90

d [mm]
SIZE [inch]
ISO-METRIC
PVC-U
for solvent welding
BS-INCH
for solvent welding

PVC-U

ASTM-INCH
PVC-U
for solvent welding

12

16

20
1/2"

25
3/4"

32
1

40
50
63
1 1/4" 1 1/2" 2"

75
90
2 1/2" 3"

110
4"

140
5

160
6"

180

200

225
8"

250

280
10"

315
12"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN10

PN10

PN10

TIV

10

PN16

n.a.

n.a.

class E class E class E class D class E class E class D class E class E n.a.

class D n.a.

n.a.

class D n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

SCH40 SCH40

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

SCH80 SCH80

TLV
TAV

Tee 45

12

16

20

25

32

40

50

63

75

90

110

140

160

180

200

225

250

280

315

Type

n.a.

n.a.

PN16

PN16

PN16

PN16

PN16

PN16

n.a.

n.a.

n.a.

n.a.

PN4

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

YIV

d [mm]
ISO-METRIC
PVC-U
for solvent welding

PN16

n.a.

d [mm]
ISO-METRIC
PVC-U
for solvent welding

PN16

Cross 90

12

16

20

25

32

40

50

63

75

90

110

140

160

180

200

225

250

280

315

Type

n.a.

n.a.

n.a.

PN16

PN16

PN16

PN16

PN16

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

XIV

Fittings for solvent welding - Reducers


Tee 90 reducing

d [mm]

25

32

32

40

40

40

50

50

50

50

63

63

63

63

75

75

d1 [mm]
ISO-METRIC
PVC-U
for solvent welding

20

20

25

20

25

32

20

25

32

40

25

32

40

50

25

32

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

n.a.

PN16

TRIV

75
40

75
50

75
63

90
25

90
32

90
40

90
50

90
63

90
75

110
25

110
32

110
50

110
63

110
75

110
90

160
110

Type

PN16

PN16

PN16

n.a.

n.a.

PN16

PN16

PN16

PN16

PN16

n.a.

PN16

PN16

PN16

PN16

PN16

TRIV

d [mm]
d1 [mm]
ISO-METRIC
PVC-U
for solvent welding
d [mm]

250

250

250

280

280

315

315

315

d1 [mm]
ISO-METRIC
PVC-U
for solvent welding

110

160

200

160

225

160

200

250

Type

PN4*

PN4*

PN4*

PN4*

PN4*

PN4*

PN4*

PN4*

TRIV

d [mm]
16
d2 [mm]
d1 [mm]
12
ISO-METRIC
PVC-U PN16
for solvent welding
d [mm]
63
d2 [mm]
50
d1 [mm]
40
ISO-METRIC
PVC-U PN16
for solvent welding

* resale product

Reducer

20
16

25
20
16

25
20
20

32
25
16

32
25
20

32
25
25

40
32
20

40
32
25

40
32
32

50
40
20

50
40
25

50
40
32
PN16

50
40
40

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

63
50
50

75
63
50

75
63
63

90
75
40

90
75
50

90
75
63

90
75
75

110
90
50

110
90
63

110
90
75

110
90
90

110
90

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16** PN16

63
50
25

63
50
32

Type

PN16

RIV

PN16

PN16

160

200

110

160

Type

PN10

RIV

** double socket reducing MRIV 110x90

11

Fittings for solvent welding - Reducers


d [mm]
d1 [mm]
ISO-METRIC
for solvent welding
d [mm]
d1 [mm]
ISO-METRIC
for solvent welding
d [mm]
d1 [mm]
ISO-METRIC
for solvent welding
d [inch]
d1 [inch]
BS-INCH
for solvent welding
d [inch]
d1 [inch]
BS-INCH
for solvent welding
* resale product
** reduced safety factor

12

Reducing bush

16
12
PVC-U

PVC-U

PVC-U

PVC-U

PVC-U

20
16

25
20

32
20

32
25

40
20

40
25

40
32

50
32

50
40

63
32

63
40

63
50

75
50

75
63

90
50

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

DIV

90
63

90
75

110
63

110
75

110
90

125
110

140
90

140
110

140
125

160
90

160
110

160
140

180
160

200
160

200
180

225
160

Type

PN16** DIV

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN4*

PN16*

PN4*

225
200

180
160

200
160

200
180

250
160

250
180

250
200

250
225

280
200

280
225

280
250

315
200

315
225

315
250

315
280

Type

PN16** PN4*

PN16

PN4*

PN10

PN4*

PN10

PN10

PN4*

PN10

PN4*

PN10

PN10

PN10

PN10

DIV

1/2"
3/8"

3/4"
1/2"

1"
1/2"

1"
3/4"

1 1/4
1"

1 1/2
3/4"

1 1/2
1"

1 1/2
1 1/4

2"
3/4"

2"
1"

2"
1 1/2

2 1/2
2"

3"
1 1/2

3"
2"

3"
2 1/2

4"
2"

Type

class E

class E

class E

class E

class E

class E

class E

class E

class E

class E

class E

class E

class E

class E

class E

class E

DLV

4"
3"

6"
4"

8"
6"

Type

class E

class D

class D

DLV

Threaded fittings - Equal


Double socket

R [inch]
Threaded BSP

PVC-U

3/8"

1/2"

3/4"

1 1/4"

1 1/2"

2"

2 1/2"

3"

4"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

MFV

Barrel nipple

R [inch]
Threaded BSP

PVC-U

3/8"

1/2"

3/4"

1 1/4"

1 1/2"

2"

2 1/2"

3"

4"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16*

PN16*

PN16*

NFV

R [inch]
Threaded BSP

PVC-U

3/8"

1/2"

3/4"

1 1/4"

1 1/2"

2"

2 1/2"

3"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

n.a.

CFV

Plug

R [inch]
Threaded BSP

* reduced safety factor

End Cap

PVC-U

3/8"

1/2"

3/4"

1 1/4"

1 1/2"

2"

2 1/2"

3"

4"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PFV

13

Threaded fittings - Equal


Socket union

R [inch]
Threaded BSP

PVC-U

3/8"

1/2"

3/4"

1 1/4"

1 1/2"

2"

2 1/2"

3"

4"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

n.a.

n.a.

n.a.

BFV

Elbow 90

R [inch]
Threaded BSP

PVC-U

3/8"

1/2"

3/4"

1 1/4"

1 1/2"

2"

2 1/2"

3"

4"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

GFV

Elbow 45

R [inch]
Threaded BSP

3/8
PVC-U

1/2"

3/4"

1 1/4"

1 1/2"

2"

2 1/2"

3"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

n.a.

HFV

Tee 90

R [inch]
Threaded BSP

14

PVC-U

3/8"

1/2"

3/4"

1 1/4"

1 1/2"

2"

2 1/2"

3"

4"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

TFV

Threaded fittings - Reducers


Barrel nipple reduced

R1 [inch]
R [inch]
Threaded BSP

PVC-U

3/4"
1/2"

1
1/2

1
3/4"

1 1/4"
1

1 1/2"
1 1/4"

2"
1 1/2"

2 1/2"
2"

3"
2 1/2"

4"
3"

Type

PN16

n.a.

PN16

PN16

PN16

PN16

PN16

PN16

PN16

NRFV

Reducer socket/spigot

R1 [inch]
R [inch]
Threaded BSP

PVC-U

3/4"
1/2"

1
1/2"

1
3/4"

1 1/4"
1

1 1/2"
1 1/4"

2"
1 1/2"

2 1/2"
2"

3"
2 1/2"

4"
3"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

IFFV

Reducer spigot/ socket

R [inch]
R1 [inch]
Threaded BSP

PVC-U

R [inch]
R1 [inch]
Threaded BSP

PVC-U

1/2"
3/8"

3/4"
3/8"

3/4"
1/2"

1
3/8"

1
3/4"

1
2"

1 1/4"
1/2"

1 1/4"
3/4"

1 1/4"
1

1 1/2"
1/2"

1 1/2"
3/4"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

RFV

1 1/2"
1

1 1/2"
1 1/4"

2"
3/4"

2"
1

2"
1 1/4"

2"
1 1/2"

2 1/2"
2"

3"
2"

3"
2 1/2"

4"
3"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

RFV

15

Threaded fittings - Reducers


Reducing bush

R [inch]
R1 [inch]
Threaded BSP

PVC-U

1/2"
3/8"

3/4"
1/2"

1
3/4"

1 1/4
1"

1 1/2
1 1/4

2"
1 1/2

2 1/2"
2

3"
2 1/2

4"
3

Type

PN16

PN16

PN16

PN16

PN16

PN16

n.a.

n.a.

n.a.

DFV

Adaptor fittings

Double socket

d [mm]
R [BSP]
ISO-BSP

PVC-U

16
3/8"

20
1/2"

25
3/4"

32
1

40
1 1/4"

50
1 1/2"

63
2"

75
2 1/2"

90
3"

110
4"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

MIFV

1/2"
1/2"

3/4"
3/4"

1
1

1 1/4"
1 1/4"

1 1/2"
1 1/2"

2"
2"

2 1/2"
2 1/2"

3"
3"

class E

class E

class E

class E

class E

class E

class D

class D

d [inch]
R [BSP]
BS-BSP

PVC-U

Double socket with reinforcing Stainless Steel ring

d [mm]
R [BSP]
ISO-BSP

16

MLFV

PVC-U

16
3/8"

20
1/2"

25
3/4"

32
1

40
1 1/4"

50
1 1/2"

63
2"

75
2 1/2"

90
3"

110
4"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

n.a.

n.a.

n.a.

MIMV

Adaptor fittings

d [mm]
R [BSP]
ISO-BSP

Socket union

PVC-U

16
3/8"
PN16

20
1/2"
PN16

d [mm]
R [BSP]
ISO-BSP (male
thread)

32
1
PN16

40
1 1/4"
PN16

50
1 1/2"
PN16

63
2"
PN16

75
2 1/2"
PN10

90
3"
PN6

110
4"
PN6

50
1 1/2"

50
2"

63
2"

Type

PN16

PN16

PN16

BIRV

Type
BIFV

Socket union

PVC-U

d [mm]
R [BSP]
ISO-BSP

25
3/4"
PN16

Socket union plastic/brass

PVC-U

16
3/8"
PN16

20
1/2"
PN16

25
3/4"
PN16

32
1
PN16

40
1 1/4"
PN16

50
1 1/2"
PN16

63
2"
PN16

75
2 1/2"
n.a.

90
3"
n.a.

110
4"
n.a.

Type
BIFVO

16
3/8"

20
1/2"

25
3/4"

32
1

40
1 1/4"

50
1 1/2"

63
2"

75
2 1/2"

90
3"

110
4"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

n.a.

n.a.

n.a.

BIRVO

d [mm]
R [BSP]
ISO-BSP (male
thread)

PVC-U

Note: O-Rings and flat gaskets available: see FIP Price lists and catalogues.

17

Adaptor fittings

Double adaptor socket/spigot female thread

dm [mm]
df [mm]
R [BSP]
ISO-BSP

PVC-U

20
16
3/8"

20
16
1/2"

25
20
1/2"

25
20
3/4"

32
25
3/4"

32
25
1"

40
32
1"

50
50
63
63
40
40
50
50
1 1/4 1 1/2 1 1/2 2"

75
63
2"

75
90
90
63
75
75
2 1/2 2 1/2 3"

110
90
3"

110
90
4"

125
110
4"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

DIFV

18

PN16

PN16

PN16

PN16

Double adaptor socket/spigot with reinforcing Stainless Steel ring

dm [mm]
df [mm]
R [BSP]
ISO-BSP

PN16

PVC-U

20
16
3/8"

20
16
1/2"

25
20
1/2"

25
20
3/4"

32
25
3/4"

32
25
1"

40
32
1"

50
50
63
63
40
40
50
50
1 1/4 1 1/2 1 1/2 2"

75
63
2"

75
90
90
63
75
75
2 1/2 2 1/2 3"

110
90
3"

110
90
4"

125
110
4"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

n.a.

n.a.

n.a.

n.a.

DIMV

PN16

PN16

PN16

n.a.

n.a.

Adaptor fittings

dm [mm]
df [mm]
R [BSP]
ISO-BSP
(male thread)
dm [mm]
df [mm]
R [BSP]
ISO-BSP
(male thread)

Double adaptor socket/spigot male thread

PVC-U

PVC-U

16
12
3/8

20
16
3/8

20
16
1/2

25
20
1/2

25
20
3/4

32
25
1/2

32
25
3/4

32
25
1

40
32
3/4

40
32
1

40
32
1 1/4

50
40
1

50
40
1 1/4

50
40
1 1/2

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

KIFV

63
50
1 1/4

63
50
1 1/2

63
50
2

75
63
1 1/2

75
63
2

75
63
2 1/2

90
75
2

90
75
2 1/2

90
75
3

110
90
2 1/2

110
90
3

110
90
4

125
110
3

125
110
4

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

KIFV

Barrel nipple reduced

d [mm]
R [BSP]
ISO-BSP

PVC-U

25
1"

32
1 1/4

Type

PN16

PN16

NRIV

Adaptor socket/spigot

d [inch]
R [BSP]
BS-BSP

PVC-U

3/8"
3/8"

1/2"
1/2"

3/4"
3/4"

1"
1"

1 1/4
1 1/4

1 1/2
1 1/2

2"
2"

2 1/2
2 1/2

3
3

4
4

Type

n.a.

class E

class E

class E

class E

class E

class E

n.a.

n.a.

n.a.

ILFV

19

Adaptor fittings

Elbow 90

d [mm]
R [BSP]
ISO-BSP

16
3/8"
PVC-U

d [inch]
R [BSP]
BS-BSP

PVC-U

20
1/2"

40
1 1/4"

50
1 1/2"

63
2"

75
2 1/2"

90
3"

110
4"

Type
GIFV

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

1/2"
1/2"

3/4"
3/4"

1
1

1 1/4"
1 1/4"

1 1/2"
1 1/2"

2"
2"

2 1/2"
2 1/2"

3"
3"

4"
4"

n.a.

class E

class E

class E

class E

class E

class E

class D

class D

class D

GLFV

Elbow 90 with reinforcing Stainless Steel ring

d [mm]
R [BSP]

20

32
1

3/8
3/8

ISO-BSP

25
3/4"

PVC-U

16
3/8"

20
1/2"

25
3/4"

32
1

40
1 1/4"

50
1 1/2"

63
2"

75
2 1/2"

90
3"

110
4"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

n.a.

n.a.

n.a.

GIMV

Adaptor fittings

Tee 90

d [mm]
R [BSP]
ISO-BSP

PVC-U

16
3/8"

20
1/2"

25
3/4"

32
1

40
1 1/4"

50
1 1/2"

63
2"

75
2 1/2"

90
3"

110
4"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

TIFV

Tee 90 with reinforcing Stainless Steel ring

d [mm]
R [BSP]
ISO-BSP

PVC-U

16
3/8"

20
1/2"

25
3/4"

32
1

40
1 1/4"

50
1 1/2"

63
2"

75
2 1/2"

90
3"

110
4"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

n.a.

n.a.

n.a.

TIMV

21

Tank connectors

d [mm]
R [BSP]
ISO-BSP

PVC-U

25
1

32
1 1/4"

Type

PN16

PN16

LIV

d [mm]
R [BSP]
R1 [BSP]
ISO-BSP

PVC-U

16
3/4"
1/2"

20
1"
3/4"

25
1 1/4
1"

32
1 1/2
1"

40
2"
1 1/2

Type

PN16

PN16

PN16

PN16

PN16

LIFV

1/2"

3/4"

1"

1 1/4

1 1/2

2"

Type

PN16

PN16

PN16

PN16

PN16

PN16

JFV

R [BSP]
ISO-BSP

PVC-U

Flat gaskets available: see FIP Price lists and catalogues.

22

Hose adaptors

d [mm]
P1 [mm]
P2 [mm]
ISO-METRIC

PVC-U

12
12
14

16
16
18

20
20
22

25
25
27

32
30
32

40
40
42

50
50
52

63
60
64

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

AIV

1/4"
12
14

3/8"
16
18

1/2"
20
22

3/4"
25
27

1
30
32

1 1/4"
40
42

1 1/2"
50
52

2"
60
64

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

AFV

1/2"
12
14

3/4"
16
18

1"
20
22

1 1/4
25
27

1 1/2"
30
32

2"
40
42

2"
50
52

2 1/4
50
52

2 1/2
60
64

2 3/4
60
64

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

ADV

R [inch]
P1 [mm]
P2 [mm]
Threaded BSP

PVC-U

R [inch]
P1 [mm]
P2 [mm]
Threaded BSP

PVC-U

23

Stubs

d [mm]
DN [mm]
DIN8063 PN10/16 socket ISO-Metric
for solvent welding
d [mm]
DN [mm]
DIN8063 PN10/16 socket ISO-Metric
for solvent welding
SIZE [inch]
BS-INCH
for solvent welding

Flat face stub

20
15
PVC-U PN16
160
150
PVC-U PN16
2"
PVC-U class E

d [mm]
DN [mm]
ISO-METRIC
for solvent welding
d [mm]
DN [mm]
ISO-METRIC
for solvent welding
* resale product
** reduced safety factor

24

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

125
110

140
125

Type

PN16

QPV

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

200
200

225
200

250
250

280
250

315
300

355
350

400
400

450
450

500
500

Type

PN16**

n.a.

n.a.

n.a.

n.a.

PN4*

PN4*

PN4*

PN4*

QPV

2 1/2"

3"

4"

6"

8"

Type

class E

class E

class E

class D

class D

QLV

Serrated face stub (for use with flat gaskets)

20
15

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

125
110

140
125

Type

PVC-U n.a.

n.a.

n.a.

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

QRV

160
150

200
200

225
200

250
250

280
250

315
300

355
350

400
400

450
450

500
500

Type

PN16**

PN16**

PN16**

PN10

PN10

n.a.

n.a.

n.a.

n.a.

QRV

PVC-U PN16

Stubs

d [mm]
DN [mm]
ISO-METRIC
for solvent welding
d [mm]
DN [mm]
ISO-METRIC
for solvent welding

O-ring stub (with seat for o-ring)

20
15
PVC-U PN16
140
125
PVC-U PN16

R [inch]
Threaded BSP

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

125
110

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

QGV

160
150

200
200

225
200

Type

PN16

PN16**

n.a.

QGV
**reduced safety factor

Flat face stub

1/2"
PVC-U PN16

3/4"

1 1/4"

1 1/2"

2"

2 1/2"

3"

4"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

QFV

Note: O-Rings and flat gaskets available: see FIP Price lists and catalogues.

25

Flanges

Backing ring

d [mm]
DN [mm]
DIN8063-DIN2501 drilled PN10/16

PVC-U

d [mm]
DN [mm]
DIN8063-DIN2501 drilled PN10/16

PVC-U

PVC-U

d [mm]
DN [mm]
Size [inch]
DIN8063-DIN2501 drilled PN10/16,
socket for solvent welding

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

125
110

140
125

Type

PN10

PN10

PN10

PN10

PN10

PN10

PN10

PN10

PN10

PN10

PN10

ODV

160
150

200*
200

225*
200

250
250

280
250

315
300

355
350

400
400

450
450

500
500

Type

PN10

PN10

PN10

PN10

PN10

PN10

PN4

PN4

PN4

PN4

ODV

Note: for use with Stubs QPV-QRV-QGV


* drilled PN10

Blind flange

d [mm]
DN [mm]
DIN8063-DIN2501 drilled PN10/16

20
15

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

180
175

200
200

225
200

Type

PN10

PN10

PN10

PN10

PN10

PN10

PN10

PN10

PN4

PN4

PN4

FCV

Note: serrated face for flat gasket

Socket flange

1/2"

25
20
3/4"

32
25
1"

40
32
1 1/4

50
40
1 1/2

63
50
2"

75
65

90
80
3"

110
100
4"

PVC-U

n.a.

PN10

PN10

PN10

PN10

PN10

PN10

Type

PN10

PN10

FDV

PVC-U

Class E

Class E

Class E

Class E

Class E

Class E

n.a.

Note: serrated face for flat gasket


BS 10 Table E, socket for solvent
welding

26

Class E
Note: flat face

Class E

FLV

working pressure

bar

-20

0 20 40 60 80 100 C

16
14
12
10
8
6
4
2
0

PVC-C

working temperature

Pressure / Temperature rating for water


and harmless fluids to which the material
is resistant.
In the other cases a reduction of the rated
PN is required.

PVC-C Fittings
Material Specifications and Technical Data
MATERIAL

PVC-C Chlorinated Polyvinylchloride (Corzan)

COLOUR

Light Grey - RAL 215

STANDARDS

Solvent welding metric size according to: ISO 727, ISO 15493
for coupling to pipes complying with DIN 8079/8080
Solvent welding plain tapered according to: ASTM F439
for coupling to pipes complying with ASTM D 1785/76
Parallel threads according to: UNI ISO 228/1, DIN 2999, BS 21
Flanging according to: ISO 7005, DIN 8063, DIN 2501, EN 1452, ANSI B16.5 150

RANGE

Fittings for Solvent Welding: from d16 mm to d160 mm


Threaded Fittings: from R3/8 up to R2

MAXIMUM WORKING
PRESSURE

16 bar (232 psi) with water at 20 C (68 F)


In case of different working conditions see technical catalogue

WORKING TEMPERATURE
RANGE

From 0 C (32 F) to 100 C (212 F)

Corzan PVC-C is suitable to be used in contact with drinking water conforming to the following standards:
- WRAS (Water Regulation Advisory Scheme) - UK
- NSF (National Sanitation Foundation) - USA
For technical details, please, see FIP catalogues or visit our web site www.fipnet.it.

27

Approvals and Quality Marks


FIP PVC-C pipes are acknowledged by IRH for ACS Certificate N. 02 MAT NY 128; FIP PVC-C
fittings are acknowledged by IRH for ACS Certificate N. 01 MAT NY 064

FIP PVC-C fittings are acknowledged by WRAS (Water Regulation Advisory Scheme - UK)
Certificate N. M103019

FIP PVC-C valves and fittings are acknowledged by Bureau Veritas - Marine Division, to be
used for the following service on board: domestic water systems (cold sea and fresh water),
scupper and sanitary discharges and non-essential systems. Certificate No 07124/C1BV
FIP PVC-C fittings are acknowledged by NSF (National Sanitation Foundation)
Certificate N. 11370/11371A

28

Fittings for solvent welding - Equal


d [mm]
DN [mm]
ISO-METRIC
PVC-C
for solvent welding

Double socket

16
10

20
15

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

160
150

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

MIC

160
150

Type

d [mm]
DN [mm]
ISO-METRIC
PVC-C
for solvent welding

End Cap

16
10

20
15

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

n.a.

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

75
65

90
80

110
100

d [mm]
DN [mm]
ISO-METRIC
PVC-C
for solvent welding

CIC

Socket union

16
10

20
15

25
20

32
25

40
32

50
40

63
50

PN16

PN16

PN16

PN16

PN16

PN16

PN16

160
150

Type
BIC

Note: O-Rings available: see FIP Price lists and catalogues.

29

Fittings for solvent welding - Equal


d [mm]
DN [mm]
ISO-METRIC
PVC-C
for solvent welding

Elbow 90

16
10

20
15

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

160
150

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

GIC

d [mm]
DN [mm]
ISO-METRIC
PVC-C
for solvent welding

Elbow 45

16
10

20
15

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

160
150

Type

n.a.

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

HIC

d [mm]
DN [mm]
ISO-METRIC
PVC-C
for solvent welding

30

Tee 90

16
10

20
15

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

160
150

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

TIC

Fittings for solvent welding - Reducers


d [mm]
d1 [mm]
ISO-METRIC
PVC-C
for solvent welding

Tee 90 reducing

20
16

25
20

32
20

32
25

40
20

40
25

50
25

50
32

63
25

63
32

75
25

90
25

110
25

Type

n.a.

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

TRIC

Reducing bush

d [mm]
d1 [mm]
ISO-METRIC
PVC-C
for solvent welding

20
16

25
20

32
20

32
25

40
20

40
25

40
32

50
32

50
40

63
32

63
40

63
50

75
50

75
63

90
50

90
63

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

DIC

d [mm]
d1 [mm]
ISO-METRIC
PVC-C
for solvent welding

90
75

110
63

110
75

110
90

160
110

Type

PN16

PN16

PN16

PN16

PN16

DIC

31

Adaptor fittings

Double socket with reinforcing Stainless Steel ring

d [mm]
R [BSP]
ISO-BSP

PVC-C

16
3/8"

20
1/2"

25
3/4"

32
1

40
1 1/4"

50
1 1/2"

63
2"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

MIMC

Double adaptor socket/spigot male thread

dm [mm]
df [mm]
R [BSP]
ISO-BSP

PVC-C

20
16
3/8"

25
20
1/2"

32
25
3/4"

40
32
1"

50
40
1 1/4

63
50
1 1/2

75
63
2"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

KIFC

Socket union

d [mm]
R [BSP]
ISO-BSP

32

PVC-C

16
3/8"

20
1/2"

25
3/4"

32
1

40
1 1/4"

50
1 1/2"

63
2"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

BIFC

Adaptor fittings

Socket union plastic/brass

d [mm]
R [BSP]
ISO-BSP

PVC-C

16
3/8"

20
1/2"

25
3/4"

32
1

40
1 1/4"

50
1 1/2"

63
2"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

BIFCO

16
3/8"

20
1/2"

25
3/4"

32
1

40
1 1/4"

50
1 1/2"

63
2"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

BIRCO

d [mm]
R [BSP]
ISO-BSP (male
thread)

PVC-C

Note: O-Rings and flat gaskets available: see FIP Price lists and catalogues.

33

Adaptor fittings

Elbow 90 with reinforcing Stainless Steel ring

d [mm]
R [BSP]
ISO-BSP

PVC-C

16
3/8"

20
1/2"

25
3/4"

32
1

40
1 1/4"

50
1 1/2"

63
2"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

GIMC

Tee 90 with reinforcing Stainless Steel ring

d [mm]
R [BSP]
ISO-BSP

34

PVC-C

16
3/8"

20
1/2"

25
3/4"

32
1

40
1 1/4"

50
1 1/2"

63
2"

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

TIMC

Stubs

Serrated face stub (for use with flat gaskets)

d [mm]
DN [mm]
ISO-METRIC
PVC-C
for solvent welding

20
15

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

125
110

140
125

160
150

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

QRC

Flanges

d [mm]
DN [mm]
DIN8063-DIN2501
drilled PN10/16

Backing ring

PVC-C

20
15

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

125
110

140
125

160
150

Type

PN10

PN10

PN10

PN10

PN10

PN10

PN10

PN10

PN10

n.a.

n.a.

n.a.

ODC

20
15

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

125
110

140
125

160
150

Type

MOP16

MOP16

MOP16

MOP16

MOP16

MOP16

MOP16

n.a

n.a

n.a.

n.a.

n.a.

ODB

Alternative:

d [mm]
DN [mm]
DIN2501
drilled PN10/16

PP/FRP*

* with steel core


Note: MOP is the maximum operating pressure, to be considered when chosing the gaskets

35

bar

working pressure

10

-20

20

PN10

40

60

80 100 C
10 years
50 years

6
4
2
0

PP-H Fittings - Socket Fusion


Material Specifications and Technical Data
MATERIAL

PP-H Polypropylene homopolymer

COLOUR

Beige - RAL 7032

STANDARDS

Socket Fusion according to: DIN 16962 for coupling to pipes complying with DIN
8077/8078, EN ISO 15494, BS 4991
Parallel threads according to: UNI ISO 228/1 - DIN 2999 - BS 21
Flanging according to: ISO 7005, DIN 8063, DIN 2501, ANSI B16.5 150

RANGE

Fittings for Socket Fusion: from d20 mm to d110 mm,


Threaded fittings: from R up to R2

MAXIMUM WORKING
PRESSURE

10 bar (145 psi) with water at 20 C (68 F)


In case of different working conditions see technical catalogue

WORKING TEMPERATURE
RANGE

From 0 C (32 F) to 100 C (212 F)

working temperature

Pressure / Temperature rating for water


and harmless fluids to which the material
is resistant.
In the other cases a reduction of the rated
PN is required.

For technical details, please, see FIP catalogues or visit our web site www.fipnet.it.

36

Fittings for socket fusion - Equal


d [mm]
DN [mm]
ISO-METRIC
for socket fusion

Double socket

PP-H

20
15

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

Type

PN10

PN10

PN10

PN10

PN10

PN10

PN10

PN10

PN10

MIM

d [mm]
DN [mm]
ISO-METRIC
for socket fusion

End Cap

PP-H

20
15

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

Type

PN10

PN10

PN10

PN10

PN10

PN10

PN10

PN10

PN10

CIM

40
32
PN10
PN10

50
40
PN10
PN10

63
50
PN10
PN10

75
65
n.a.
n.a.

90
80
n.a.
n.a.

110
100
n.a.
n.a.

Type
BIM
BIMG

d [mm]
DN [mm]
ISO-METRIC
for socket fusion

Socket union

PP-H

20
15
PN10
PN10

25
20
PN10
PN10

32
25
PN10
PN10

Notes:
BIM union threads trapezoidal
BIMG union threads BSP

37

Fittings for socket fusion - Equal

d [mm]
DN [mm]
ISO-METRIC
for socket fusion

Elbow 90

PP-H

20
15

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

Type

PN10

PN10

PN10

PN10

PN10

PN10

PN10

PN10

PN10

GIM

d [mm]
DN [mm]
ISO-METRIC
for socket fusion

Elbow 45

PP-H

20
15

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

Type

PN10

PN10

PN10

PN10

PN10

PN10

PN10

PN10

PN10

HIM

d [mm]
DN [mm]
ISO-METRIC
for socket fusion

38

Tee 90

PP-H

20
15

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

Type

PN10

PN10

PN10

PN10

PN10

PN10

PN10

PN10

PN10

TIM

Fittings for socket fusion - Reducers


d [mm]
d1 [mm]
ISO-METRIC
for socket fusion
d [mm]
d1 [mm]
ISO-METRIC
for socket fusion

Reducer

PP-H

PP-H

25
20

32
20

32
25

40
25

40
32

50
32

50
40

63
32

63
50

75
50

Type

PN10

PN10

PN10

PN10

PN10

PN10

PN10

PN10

PN10

PN10

RIM

75
63

90
63

90
75

110
63

110
90

Type

PN10

PN10

PN10

PN10

PN10

RIM

Fittings for socket fusion - Adaptors


d [mm]
R [BSP]
ISO-BSP

Double socket with reinforcing Stainless Steel ring

PP-H

20
1/2"
PN10

d [mm]
R [BSP]
ISO-BSP

25
3/4"
PN10

32
1
PN10

40
1 1/4"
PN10

50
1 1/2"
PN10

63
2
PN10

Type
MIMM

32
1
PN10

40
1 1/4"
PN10

50
1 1/2"
PN10

63
2
PN10

Type
BIFM

Socket union

PP-H

20
1/2"
PN10

25
3/4"
PN10

Note: union thread trapezoidal

39

Fittings for socket fusion - Adaptors


d [mm]
R [BSP]
ISO-BSP

Socket union plastic/brass

PP-H

20
1/2"
PN10

25
3/4"
PN10

32
1
PN10

40
1 1/4"
PN10

50
1 1/2"
PN10

63
2
PN10

Type
BIFMO

20
1/2"

25
3/4"

32
1

40
1 1/4"

50
1 1/2"

63
2

Type

PN10

PN10

PN10

PN10

PN10

PN10

BIRMO

d [mm]
R [BSP]
ISO-BSP
(male thread)

PP-H

Fittings for socket fusion - Hose adaptors


d [mm]
P1 [mm]
P2 [mm]
ISO-METRIC

40

PP-H

20
20
22
PN10

25
25
27
PN10

32
30
32
PN10

40
40
42
PN10

50
50
52
PN10

63
60
64
PN10

Type
AIM

Fittings for socket fusion - Stubs


d [mm]
DN [mm]
ISO-METRIC
for socket fusion

Serrated face stub (for use with flat gaskets)

PP-H

20
15

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

Type

PN10

PN10

PN10

PN10

PN10

PN10

PN10

PN10

PN10

QRNM

Flanges

d [mm]
DN [mm]
DIN2501
drilled PN10/16

Backing ring

20
15
PP/FRP* MOP16

d [mm]
DN [mm]
DIN2501
drilled PN10/16

25
20

32
25

40
32

50
40

63
50

75
65

90**
80

125***
100

MOP16

MOP16

MOP16

MOP16

MOP16

MOP16

MOP16

MOP16

ODB

Blind flange

20
15
PP/FRP* MOP16

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

MOP16

MOP16

MOP16

MOP16

MOP16

MOP16

MOP16

MOP16

ODBC

Note: Flat gaskets available: see FIP Price lists and catalogues.
* with steel core
** only suitable for stub FIP QRNM d90
*** only suitable for stub FIP QRNM d110

41

bar

-20

working pressure

16

20

5 years
25 years

14

40

60

80 100 C

SDR11
ISO - S5

12

5 years
25 years
SDR17,6
8
ISO - S8,3
10

PP-H Fittings - Butt Welding


Material Specifications and Technical Data
MATERIAL

PP-H Polypropylene homopolymer

COLOUR

Beige - RAL 7032

STANDARDS

Butt Welding according to: DIN 16962 for coupling to pipes complying with DIN
8077/8078, EN ISO 15494, BS 4991
Flanging according to: ISO 7005, DIN 8063, DIN 2501, ANSI B16.5 150
Parallel threads according to: UNI ISO 228/1 - DIN 2999 - BS 2

RANGE

Fittings for Butt Welding: from d20 mm to d400 mm


Threaded Fittings: from R up to R2

MAXIMUM WORKING
PRESSURE

SDR11: 12,5 bar (181 psi) with water at 20 C (68 F)


SDR17,6: 7,5 bar (109 psi) with water at 20 C (68 F)
In case of different working conditions see technical catalogue

WORKING TEMPERATURE
RANGE

From 0 C (32 F) to 100 C (212 F)

4
2
0

working temperature
bar

-20

16

working pressure

14
12
10
8
6

20

10 years
50 years

40

60

80 100 C

SDR11
ISO - S5

10 years
50 years
SDR17,6
ISO - S8,3

4
2
0

working temperature

Pressure / Temperature rating for water


and harmless fluids to which the material
is resistant.
In the other cases a reduction of the rated
PN is required.

42

For technical details, please, see FIP catalogues or visit our web site www.fipnet.it.

Fittings for butt welding - Equal


End Cap

d [mm]
DN [mm]
ISO-METRIC
for butt welding

PP-H

20
25
32
40
50
63
75
90
110
125
140
160
180
200
225
15
20
25
32
40
50
65
80
100
100
125
150
150
200
200
Type
SDR11-S5 SDR11-S5 SDR11-S5 SDR11-S5 SDR11-S5 SDR11-S5 SDR11-S5 SDR11-S5 SDR11-S5 SDR11-S5 SDR11-S5 SDR11-S5 SDR11-S5 SDR11-S5 SDR11-S5
SDR17,6 SDR17,6 SDR17,6 SDR17,6 SDR17,6 SDR17,6 SDR17,6 SDR17,6 SDR17,6 SDR17,6 CBM
n.a.
n.a.
n.a.
n.a.
n.a.
- S8,3
- S8,3
- S8,3
- S8,3
- S8,3
- S8,3
- S8,3
- S8,3
- S8,3
- S8,3

Union

d [mm]
DN [mm]

20
15

ISO-METRIC
for butt welding
ISO-METRIC
for butt welding

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

125
100

140
125

160
150

180
150

200
200

225
200

Type

PP-H

SDR11-S5 SDR11-S5 SDR11-S5 SDR11-S5 SDR11-S5 SDR11-S5


n.a.
PN10
PN10
PN10
PN10
PN10
PN10

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

BBM/L

PP-H

SDR11-S5 SDR11-S5 SDR11-S5 SDR11-S5 SDR11-S5 SDR11-S5


n.a.
PN10
PN10
PN10
PN10
PN10
PN10

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

n.a.

BBM/C

Notes
BBM/L long spigot
BBM/C short spigot

43

Fittings for butt welding - Equal


d [mm]
DN [mm]
ISO-METRIC
for butt welding
d [mm]
DN [mm]
ISO-METRIC
for butt welding

Bend 90

PP-H

PP-H

20
15
SDR11-S5
n.a.

25
20
SDR11-S5
n.a.

32
25
SDR11-S5
n.a.

40
32
SDR11-S5
SDR17,6-S8,3

50
40
SDR11-S5
SDR17,6-S8,3

63
50
SDR11-S5
SDR17,6-S8,3

75
65
SDR11-S5
SDR17,6-S8,3

90
80
SDR11-S5
SDR17,6-S8,3

110
100
SDR11-S5
SDR17,6-S8,3

125
100
Type
SDR11-S5
GBM
SDR17,6-S8,3

140
125
SDR11-S5
SDR17,6-S8,3

160
150
SDR11-S5
SDR17,6-S8,3

180
150
SDR11-S5
SDR17,6-S8,3

200
200
SDR11-S5
SDR17,6-S8,3

225
200
SDR11-S5
SDR17,6-S8,3

250
250
SDR11-S5
SDR17,6-S8,3

280
250
SDR11-S5
SDR17,6-S8,3

315
300
SDR11-S5
SDR17,6-S8,3

355
350
SDR11-S5
SDR17,6-S8,3

400
400
SDR11-S5
GBM
SDR17,6-S8,3

d [mm]
DN [mm]
ISO-METRIC
for butt welding
d [mm]
DN [mm]
ISO-METRIC
for butt welding

44

Tee 90

PP-H

PP-H

20
15
SDR11-S5
n.a.

25
20
SDR11-S5
n.a.

32
25
SDR11-S5
n.a.

40
32
SDR11-S5
SDR17,6-S8,3

50
40
SDR11-S5
SDR17,6-S8,3

63
50
SDR11-S5
SDR17,6-S8,3

75
65
SDR11-S5
SDR17,6-S8,3

90
80
SDR11-S5
SDR17,6-S8,3

110
100
SDR11-S5
SDR17,6-S8,3

125
100
Type
SDR11-S5
TBM
SDR17,6-S8,3

140
125
SDR11-S5
SDR17,6-S8,3

160
150
SDR11-S5
SDR17,6-S8,3

180
150
SDR11-S5
SDR17,6-S8,3

200
200
SDR11-S5
SDR17,6-S8,3

225
200
SDR11-S5
SDR17,6-S8,3

250
250
SDR11-S5
SDR17,6-S8,3

280
250
SDR11-S5
SDR17,6-S8,3

315
300
SDR11-S5
SDR17,6-S8,3

355
350
SDR11-S5
SDR17,6-S8,3

400
400
SDR11-S5
TBM
SDR17,6-S8,3

Fittings for butt welding - Reducers


d [mm]
d1 [mm]
ISO-METRIC
for butt welding
d [mm]
d1 [mm]
ISO-METRIC
for butt welding
d [mm]
d1 [mm]
ISO-METRIC
for butt welding
d [mm]
d1 [mm]
ISO-METRIC
for butt welding
d [mm]
d1 [mm]
ISO-METRIC
for butt welding

T 90 reducing

PP-H

PP-H

PP-H

PP-H

PP-H

63
50
SDR11-S5*
SDR17,6-S8,3*
110
63
SDR11-S5*
SDR17,6-S8,3*

75
32
SDR11-S5*
n.a.
110
75
SDR11-S5*
SDR17,6-S8,3*

75
50
SDR11-S5*
SDR17,6-S8,3*
110
90
SDR11-S5*
SDR17,6-S8,3*

75
63
SDR11-S5*
SDR17,6-S8,3*
160
110
SDR11-S5*
SDR17,6-S8,3*

90
32
SDR11-S5
SDR17,6-S8,3
125
63
SDR11-S5
SDR17,6-S8,3

90
50
SDR11-S5
SDR17,6-S8,3
125
90
SDR11-S5*
SDR17,6-S8,3*

90
63
SDR11-S5*
SDR17,6-S8,3*
125
110
SDR11-S5*
SDR17,6-S8,3*

90
75
SDR11-S5*
SDR17,6-S8,3*
140
63
SDR11-S5
SDR17,6-S8,3

110
32
SDR11-S5
SDR17,6-S8,3
140
75
SDR11-S5
SDR17,6-S8,3

110
50
SDR11-S5
SDR17,6-S8,3
140
90
SDR11-S5
SDR17,6-S8,3

140
110
SDR11-S5
SDR17,6-S8,3

160
63
SDR11-S5*
SDR17,6-S8,3*

160
75
SDR11-S5*
SDR17,6-S8,3*

160
90
SDR11-S5*
SDR17,6-S8,3*

160
110
SDR11-S5*
SDR17,6-S8,3*

160
125
SDR11-S5
SDR17,6-S8,3

180
63
SDR11-S5
SDR17,6-S8,3

180
75
SDR11-S5
SDR17,6-S8,3

180
90
SDR11-S5*
SDR17,6-S8,3*

180
110
SDR11-S5*
TRBM
SDR17,6-S8,3*

180
125
SDR11-S5
SDR17,6-S8,3

180
160
SDR11-S5*
SDR17,6-S8,3*

200
63
SDR11-S5
SDR17,6-S8,3

200
90
SDR11-S5
SDR17,6-S8,3

200
110
SDR11-S5
SDR17,6-S8,3

200
125
SDR11-S5
SDR17,6-S8,3

200
160
SDR11-S5
SDR17,6-S8,3

225
75
SDR11-S5*
SDR17,6-S8,3*

225
90
SDR11-S5*
SDR17,6-S8,3*

225
110
SDR11-S5*
TRBM
SDR17,6-S8,3*

225
125
SDR11-S5
SDR17,6-S8,3

225
160
SDR11-S5*
SDR17,6-S8,3*

225
180
SDR11-S5*
SDR17,6-S8,3*

250
110
SDR11-S5
SDR17,6-S8,3

250
160
SDR11-S5
SDR17,6-S8,3

Type
TRBM
Type
TRBM

TRBM

* long spigot

45

Fittings for butt welding - Reducers


d1 [mm]
d2 [mm]
ISO-METRIC
for butt welding
d1 [mm]
d2 [mm]
ISO-METRIC
for butt welding
d1 [mm]
d2 [mm]
ISO-METRIC
for butt welding
d1 [mm]
d2 [mm]
ISO-METRIC
for butt welding
d1 [mm]
d2 [mm]
ISO-METRIC
for butt welding
d1 [mm]
d2 [mm]
ISO-METRIC
for butt welding
d1 [mm]
d2 [mm]
ISO-METRIC
for butt welding

46

Reducer

PP-H

PP-H

PP-H

PP-H

PP-H

PP-H

PP-H

25
20
SDR11-S5
n.a.

32
20
SDR11-S5
n.a.

32
25
SDR11-S5
n.a.

40
20
SDR11-S5
SDR17,6-S8,3

40
25
SDR11-S5
SDR17,6-S8,3

40
32
SDR11-S5
SDR17,6-S8,3

50
25
SDR11-S5
SDR17,6-S8,3

50
32
SDR11-S5
SDR17,6-S8,3

50
40
SDR11-S5
SDR17,6-S8,3

63
32
Type
SDR11-S5
RBM
SDR17,6-S8,3

63
40
SDR11-S5
SDR17,6-S8,3

63
50
SDR11-S5
SDR17,6-S8,3

75
32
SDR11-S5
SDR17,6-S8,3

75
40
SDR11-S5
SDR17,6-S8,3

75
50
SDR11-S5
SDR17,6-S8,3

75
63
SDR11-S5
SDR17,6-S8,3

90
50
SDR11-S5
SDR17,6-S8,3

90
63
SDR11-S5
SDR17,6-S8,3

90
75
SDR11-S5
SDR17,6-S8,3

110
50
SDR11-S5
RBM
SDR17,6-S8,3

110
63
SDR11-S5
SDR17,6-S8,3

110
75
SDR11-S5
SDR17,6-S8,3

110
90
SDR11-S5
SDR17,6-S8,3

125
63
SDR11-S5
SDR17,6-S8,3

125
75
SDR11-S5
SDR17,6-S8,3

125
90
SDR11-S5
SDR17,6-S8,3

125
110
SDR11-S5
SDR17,6-S8,3

140
75
SDR11-S5
SDR17,6-S8,3

140
90
SDR11-S5
SDR17,6-S8,3

140
110
Type
SDR11-S5
RBM
SDR17,6-S8,3

140
125
SDR11-S5
SDR17,6-S8,3

160
90
SDR11-S5
SDR17,6-S8,3

160
110
SDR11-S5
SDR17,6-S8,3

160
125
SDR11-S5
SDR17,6-S8,3

160
140
SDR11-S5
SDR17,6-S8,3

180
90
SDR11-S5
SDR17,6-S8,3

180
110
SDR11-S5
SDR17,6-S8,3

180
125
SDR11-S5
SDR17,6-S8,3

180
140
SDR11-S5
SDR17,6-S8,3

180
160
SDR11-S5
RBM
SDR17,6-S8,3

200
140
SDR11-S5
SDR17,6-S8,3

200
160
SDR11-S5
SDR17,6-S8,3

200
180
SDR11-S5
SDR17,6-S8,3

225
140
SDR11-S5
SDR17,6-S8,3

225
160
SDR11-S5
SDR17,6-S8,3

225
180
SDR11-S5
SDR17,6-S8,3

225
200
SDR11-S5
SDR17,6-S8,3

250
160
SDR11-S5
SDR17,6-S8,3

250
180
SDR11-S5
SDR17,6-S8,3

250
200
Type
SDR11-S5
RBM
SDR17,6-S8,3

250
225
SDR11-S5
SDR17,6-S8,3

280
200
SDR11-S5
SDR17,6-S8,3

280
225
SDR11-S5
SDR17,6-S8,3

280
250
SDR11-S5
SDR17,6-S8,3

315
200
SDR11-S5
SDR17,6-S8,3

315
225
SDR11-S5
SDR17,6-S8,3

315
250
SDR11-S5
SDR17,6-S8,3

315
280
SDR11-S5
SDR17,6-S8,3

355
200
SDR11-S5
SDR17,6-S8,3

355
225
Type
SDR11-S5
RBM
SDR17,6-S8,3

355
250
SDR11-S5
SDR17,6-S8,3

355
280
SDR11-S5
SDR17,6-S8,3

355
400
315
225
SDR11-S5
SDR11-S5
SDR17,6-S8,3 SDR17,6-S8,3

400
250
SDR11-S5
SDR17,6-S8,3

400
280
SDR11-S5
SDR17,6-S8,3

400
315
SDR11-S5
SDR17,6-S8,3

400
355
SDR11-S5
SDR17,6-S8,3

Type
RBM

Fittings for butt welding - Adaptors


d [mm]
R [BSP]
ISO Butt
PP-H
welding - BSP

Adaptor with spigot threaded and short spigot

20
25
1/2"
1/2"
SDR11-S5
PN10

25
32
3/4"
1/2"
SDR11-S5
PN10

32
3/4"

32
40
1
3/4"
SDR11-S5
PN10

40
1

40
50
1 1/4"
3/4"
SDR11-S5
PN10

50
1

50
1 1/4"

50
1 1/2"
SDR11-S5
PN10

63
75
2"
2 1/2"
SDR11-S5
PN10

50
1 1/2"
SDR11-S5
PN10

63
2"
SDR11-S5
PN10

Type
KBFM

Adaptor with female thread and short spigot

d [mm]
20
R [BSP]
1/2"
ISO Butt
SDR11-S5
PP-H
welding - BSP
PN10

25
1/2"
SDR11-S5
PN10

25
3/4"
SDR11-S5
PN10

32
1/2"
SDR11-S5
PN10

32
3/4"
SDR11-S5
PN10

32
1
SDR11-S5
PN10

40
3/4"
SDR11-S5
PN10

40
1
SDR11-S5
PN10

40
1 1/4"
SDR11-S5
PN10

50
3/4"
SDR11-S5
PN10

50
1
SDR11-S5
PN10

50
1 1/4"
SDR11-S5
PN10

75
2 1/2"
Type
SDR11-S5
DBMM
PN10

Fittings for butt welding - Stubs


Serrated face stub (for use with flat gaskets)

d [mm]
DN [mm]
ISO-METRIC
PP-H
for butt welding

20
15
SDR11-S5

25
20
SDR11-S5

32
25
SDR11-S5

40
32
SDR11-S5
SDR17,6-S8,3

50
40
SDR11-S5
SDR17,6-S8,3

63
50
SDR11-S5
SDR17,6-S8,3

75
65
SDR11-S5
SDR17,6-S8,3

90
80
SDR11-S5
SDR17,6-S8,3

110
100
SDR11-S5
SDR17,6-S8,3

125
100
SDR11-S5
SDR17,6-S8,3

d [mm]
DN [mm]
ISO-METRIC
PP-H
for butt welding

140
125
SDR11-S5
SDR17,6-S8,3

160
150
SDR11-S5
SDR17,6-S8,3

180
150
SDR11-S5
SDR17,6-S8,3

200
200
SDR11-S5
SDR17,6-S8,3

225
200
SDR11-S5
SDR17,6-S8,3

250
250
SDR11-S5
SDR17,6-S8,3

280
250
SDR11-S5
SDR17,6-S8,3

315
300
SDR11-S5
SDR17,6-S8,3

355
350
SDR11-S5
SDR17,6-S8,3

400
400
SDR11-S5
SDR17,6-S8,3

Type
QBM
Type
QBM

47

Flanges

d [mm]
DN [mm]
DIN2501 drilled PN10/16 up to d180,
PN10 from d200 up to d400
d [mm]
DN [mm]
DIN2501 drilled PN10/16 up to d180,
PN10 from d200 up to d400

20
15
PP/FRP* MOP16
140
125
PP/FRP* MOP16

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

125
100

Type

MOP16

MOP16

MOP16

MOP16

MOP16

MOP16

MOP16

MOP16

MOP16

ODB

160
150

180
150

200
200

225
200

250
250

280
250

315
300

355
350

400
400

Type

MOP16

MOP16

MOP10

MOP10

MOP10

MOP10

MOP10

MOP10

MOP10

ODB

d [mm]

20

25

32

40

50

63

75

90

110

125

DN [mm]

15

20

25

32

40

50

65

80

100

110

Size [inch]

1/2"

3/4"

1"

1 1/4

1 1/2

2"

2 1/2

3"

4"

MOP16

MOP16

MOP16

MOP16

MOP16

MOP16

MOP16

MOP16

160
150
6"

200
200
8"

250
250
10"

315
300
12"

MOP16

MOP10

MOP10

MOP10

ANSI 150 drilled ANSI B16.5


d [mm]
DN [mm]
Size [inch]
ANSI 150 drilled ANSI B16.5

PP/FRP* MOP16
140
125
PP/FRP* n.a.

* with steel core


Note: MOP is the maximum operating pressure, to be considered when chosing the gaskets

48

n.a.

OAB

OAB

Flanges

d [mm]
DN [mm]
DIN2501 drilled PN10/16 up to d180,
PN10 from d200 up to d400
d [mm]
DN [mm]
DIN2501 drilled PN10/16 up to d180,
PN10 from d200 up to d400

Blind flange

20
15
PP/FRP* MOP16
140
125
PP/FRP* MOP16

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

125
100

MOP16

MOP16

MOP16

MOP16

MOP16

MOP16

MOP16

MOP16

MOP16

160
150

180
150

200
200

225
200

250
250

280
250

315
300

355
350

400
400

MOP16

MOP16

MOP10

MOP10

MOP10

MOP10

MOP10

MOP10

MOP10

ODBC

ODBC

* with steel core


Note: MOP is the maximum operating pressure, to be considered when chosing the gaskets

49

working pressure

bar
16
14
12
10
8
6
4
2
0

-40 -20

0 20 40 60 80 100 120 140 C

PVDF

working temperature

Pressure / Temperature rating for water


and harmless fluids to which the material
is resistant.
In the other cases a reduction of the rated
PN is required.

PVDF Fittings
Material Specifications and Technical Data
MATERIAL

PVDF Polyvinylidene Fluoride - Compound SOLEF 1008 Solvay

COLOUR

Translucent white - Natural

STANDARDS

Socket Fusion according to: ISO 10931 for coupling to pipes complying
with ISO 10931
Flanging according to: ISO 7005, DIN 8063, DIN 2501, ANSI B16.5 150

RANGE

Fittings for Socket Fusion: from d16 mm to d110 mm

MAXIMUM WORKING
PRESSURE

16 bar (232 psi) with water at 20 C (68 F)


In case of different working conditions see technical catalogue

WORKING TEMPERATURE
RANGE

From -40 C (-40 F) to 140 C (284 F)

Solef PVDF compound is suitable to be used in contact with foodstuff and drinking water conforming to the following standards:
- F.D.A. n. 21 CFR 177.2510 (Food and Drugs Administration) - USA
- Thames Water Services - UK
- KTW Institut Kunststoff fuer Trinkwasser - Germany
For technical details, please, see FIP catalogues or visit our web site www.fipnet.it.

50

Fittings for socket fusion - Equal


d [mm]
DN [mm]
ISO-METRIC
for socket fusion

Double socket

PVDF

16
10

20
15

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

Type

n.a.

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

MIF

d [mm]
DN [mm]
ISO-METRIC
for socket fusion

End Cap

PVDF

16
10

20
15

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

CIF

d [mm]
DN [mm]
ISO-METRIC
for socket fusion

Socket union

PVDF

16
10

20
15

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

n.a.

n.a.

n.a.

BIF

Note: union thread trapezoidal

51

Fittings for socket fusion - Equal


d [mm]
DN [mm]
ISO-METRIC
for socket fusion

Elbow 90

PVDF

16
10

20
15

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

GIF

d [mm]
DN [mm]
ISO-METRIC
for socket fusion

Elbow 45

PVDF

16
10

20
15

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

Type

n.a.

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

HIF

d [mm]
DN [mm]
ISO-METRIC
for socket fusion

52

Tee 90

PVDF

16
10

20
15

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

TIF

Fittings for socket fusion - Reducers


d [mm]
d1 [mm]
ISO-METRIC
for socket fusion

Reducer

PVDF

20
16

25
20

32
25

40
25

40
32

50
32

50
40

63
32

63
50

75
63

90
63

90
75

110
90

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

RIF

53

Stubs

d [mm]
DN [mm]
ISO-METRIC
for socket fusion

Serrated face stub (for use with flat gaskets)

PVDF

20
15

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

Type

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

PN16

QRNF

Note: Flat gaskets available: see FIP Price lists and catalogues.

Flanges

d [mm]
DN [mm]
DIN2501
drilled PN10/16

Backing ring

20
15
PP/FRP* MOP16

d [mm]
DN [mm]
DIN2501
drilled PN10/16

25
20

32
25

40
32

50
40

63
50

75
65

90**
80

125***
100

MOP16

MOP16

MOP16

MOP16

MOP16

MOP16

MOP16

MOP16

Blind flange

20
15
PP/FRP* MOP16

25
20

32
25

40
32

50
40

63
50

75
65

90
80

110
100

MOP16

MOP16

MOP16

MOP16

MOP16

MOP16

MOP16

MOP16

Note: MOP is the maximum operating pressure, to be considered when chosing the gaskets
* with steel core ** only suitable for stub FIP QRNF d90 *** only suitable for stub FIP QRNF d110

54

ODB

ODBC

Pipe Clips

d [mm]
a [mm]
b [mm]
h [mm]
I [mm]

Clip

16
26
18
33
16

20
33
14
38
20

25
41
14
44
25

d [mm]
A [mm]
B [mm]
C [mm]
D [mm]
E [mm]

32
49
15
51
32

40
58
16
60
40

50
68
17
71
50

63
83
18
84
63

75
96
19
97
75

90
113
20
113
90

110
139
23
134
125

125
158
25
151
140

140
177
27
167
155

160
210
30
190
180

180
237
33
211
200

Type
ZIKM

Distance plate

32
33
16
14
8
4

40
41
17
17
8
4

50
51
18
17
8
4

63
64
19
22,5
8
4

75
76
20
34,5
8
4

Type
DSM

Note: Pipe clips and distance plates are in PP

55

FIP is a company of the Aliaxis


Group: a worldwide industrial
holding gathering together a
series of companies manufacturing
and marketing plastic plumbing

FIP
Formatura
Iniezione
Polimeri

56

products for building industrial


and public utilities applications.
FIP products are manufactured
on EU production sites, operating
to the Quality Assurance System
in compliance with ISO 9001
and with the Environmental
Management System ISO 14001
standards requirements.
In FIP products there are over 50
years of know-how powered by
a strong quest for innovation.

Loc. Pian di Parata


16015 Casella Genova Italy
tel. +39 010 9621.1
fax +39 010 9621.209
info@fipnet.it
www.fipnet.it

LEFITBOOK 10/2008

Since 1954 FIP produces


injection moulded valves and
fittings in thermoplastic materials
for pressure pipeline systems
thus becoming nowadays the
largest European valves
manufacturer.

Anda mungkin juga menyukai