Scribd Logo
Unggah

Selamat datang di Scribd!

  • Case Study's: Chimney & Flues, Natural Ventilation & Kitchen Canopy Systems

    Diunggah oleh

    Airtherm Engineering Ltd
    66 tayangan2 halaman
    Airtherm Engineering Limited recently completed a flue installation at Addensbrooke House in Telford, Shropshire. The installation included a flue system to serve four new high efficiency condensing boilers, comprising a twin wall stainless steel inner and outer casing with 25mm insulation. The flue system had a 3.5m horizontal run and a 2.5m vertical section with necessary drains. Airtherm also installed a flue system from a Hamworthy water heater in the same plant room, both systems complying with relevant standards.

    Deskripsi Asli:

    View our recent installations case study's

    Judul Asli

    |Case Study's: Chimney & Flues, Natural Ventilation & Kitchen Canopy Systems

    Hak Cipta

    © Attribution Non-Commercial (BY-NC)

    Format Tersedia

    PDF, TXT atau baca online dari Scribd

    Apakah menurut Anda dokumen ini bermanfaat?

    Apakah konten ini tidak pantas?

    Laporkan Dokumen Ini
    Airtherm Engineering Limited recently completed a flue installation at Addensbrooke House in Telford, Shropshire. The installation included a flue system to serve four new high efficiency condensing boilers, comprising a twin wall stainless steel inner and outer casing with 25mm insulation. The flue system had a 3.5m horizontal run and a 2.5m vertical section with necessary drains. Airtherm also installed a flue system from a Hamworthy water heater in the same plant room, both systems complying with relevant standards.

    Hak Cipta:

    Attribution Non-Commercial (BY-NC)
    Unduh sebagai PDF, TXT atau baca online dari Scribd
    Tandai sebagai konten tidak pantas
    66 tayangan2 halaman

    Case Study's: Chimney & Flues, Natural Ventilation & Kitchen Canopy Systems

    Diunggah oleh

    Airtherm Engineering Ltd
    Airtherm Engineering Limited recently completed a flue installation at Addensbrooke House in Telford, Shropshire. The installation included a flue system to serve four new high efficiency condensing boilers, comprising a twin wall stainless steel inner and outer casing with 25mm insulation. The flue system had a 3.5m horizontal run and a 2.5m vertical section with necessary drains. Airtherm also installed a flue system from a Hamworthy water heater in the same plant room, both systems complying with relevant standards.

    Hak Cipta:

    Attribution Non-Commercial (BY-NC)
    Unduh sebagai PDF, TXT atau baca online dari Scribd
    Tandai sebagai konten tidak pantas
    dari 2

    Project Profile

    Addensbrooke House - Telford

    Consultant
    Telford & Wrekin Council

    Client
    TDR Mechanical Limited

    Sector
    Education

    Front Entrance

    Products
    MasterFlue System

    Equipment
    Hamworthy PV105c
    Airtherm Masterflue

    Application
    Condensing

    Airtherm Engineering Limited has recently completed a flue installation, working closely with the contractor at Addensbrooke House, Telford, Shropshire. The flue system(s) selected is that used Masterflue by Hamworthy Heating on their own boiler range. The flue system installed is serving four new high efficiency condensing boilers, and the flue system comprises of a twin wall stainless stel inner & outer casing with 25mm insulation. The flue system has a 3.5m horizontal run and a 2.5m vertical, incorporating the necessary drains to allow any unwanted condense to evacuate the system. Also in the same plant room is a Hamworthy DR-LA 75 water heater which Airtherm has supplied and installed a twin wall stainless steel flue system from the appliance to termination. Both systems complying with BS & Clean Air Act Memorandum.

    0844 809 2509 | airtherm.co.uk | info@airtherm.co.uk

    Product Solution

    Airtherm Masterflue

    Boilers: Model: Application: Operating mode: Pressure:

    Hanmworthy Modumax Variheat PV105 Chimney / Flue system Wet Negative / positive pressure

    Working pressure: 200 Pa (product will operate 1000pa max) Inner wall: Outer wall: Insulation: Sealant : Fuel type: 316L1.4404/1.457 thickness 300 0,5 mm AISI 304/ 1.4301 thickness 0,5 / 0,6 mm 25mm thick Rockwool insulation tri-lip 'o' type silicone ring Gas


    MasterFlue

    Other Application METALOTERM MasterFlue


    Condensing boilers Atmospheric gas-fired boilers Gas blown boilers Industrial ovens, large-scale establishments Wood-fired stoves

    Contact Details:
    Airtherm Engineering Ltd Ventilation House Pedmore Stoubridge West Midlands DY9 0DS Tel: 0844 8092509 Fax: 01562 887312

    Other Advantages METALOTERM MasterFlue


    No terminal bridges, better heat protection High-temperature silicone sealing ring Fast-build system without the need of sealants High quality insulation uninterrupted from base plate to top stub

    0844 809 2509 | airtherm.co.uk | info@airtherm.co.uk

    Anda mungkin juga menyukai