and Computer Engineering : : : XI / 1 III and X 52 hours @ 45 minutes Network) Competency Based Indicators : : 1. Installation Procedure / SOP is prepared
2. Installation equipments (Tools Kit) is prepared
Competency Standard : Installing a local network device (Local Area Installing Local Area Network
3. Equipments which wish to be installation tested as according to manual every component 4. Local Area Network ways / installed methods using the procedures, equipment I. Learning Purpose : Students able to perform a network installation of LAN hardware properly and correctly. II. Teaching Materials : Basic Materials Types and functions of Local Area Network devices and expansion. Materials Descriptions LAN is composed of several basic elements that include hardware and software components. Software components include: Personal Computer (PC), Network Interface Card (NIC) and cables. While the software components include: Network Operating Systems, Network Adapter Driver, Network Protocol. specified
There are three known types of cable in general, namely: 1. Coaxial cable 2. Fiber Optik 3. Twisted pair (UTP unshielded twisted pair dan STP shielded twisted pair) There are two types of coaxial cable, which is thick coaxial cable (has a fairly large diameter) and thin coaxial cable (has a smaller diameter). There are 2 type of cable for connecting computer networks, namely a straight cable and crossover cable which each have different functions. Straight cable used to connect the client to the hub / router, while the crossover cable used to connect the client to the client or in some cases are used to connect the HUB to HUB. Kabel Ethernet Straight Through T-568A
Basic Theories :
IV. Learning Steps A. First Activity 1. Daily attendance 2. Daily Review B. Main Activity : 1. Explains the materials according to the topic 2. Students set up a network device in accordance with the procedures specified 3. Students explain each network device C. Final activity 1. Student makes practice report which have been done 2. Instructor gives strengthening back to network base concept computer 3. Instructor gives assessment V. Tools / Materials / Learning Resources
1. Module of teaching materials (Menginstalasi Perangkat Jaringan
UTP Cable.
4. Reference books that are relevant ( Menginstalasi Perangkat
Practise Task 2 1. Study the material description of the basic concept of networking - LAN is well. Make a summary of the material, discuss with your friends! 2. Images and explain the parts of the cable : a. Coaxiall b. Twisted pair (UTP dan STP) c. Fiber Optik 3. Images and explain switching / UTP cable for : connection straight cable and crossover cable! Jobsheet 1. Observe the types of cables and connectors that connect your computer (the school computer lab) with the network. Note the types of cables and connectors that are used! Observe also that the network topology used in the laboratory! 2. Open your computer case. Carefully off (observed) NICs are used. Record type! Install and close your computer case back. 3. Take UTP cable. Peel the end of the cable 4. Connect the RJ-45 connectors on the cable you have peeled! (see references in the module) 5. Create a straigt connection cable to connect your computer to the HUB! (See reference to the module) 6. Make a crossover cable connection to connect computers 1 with computer 2 (See reference to the module) 7. Check your work on the instructor. 8. Return all the equipment in place
Yuwana Patriawarman
Vice Principal 1