but the most commonly used today are jaw and cone crushers. Jaw crushers normally take the mined material and reduce it to a manageable size -say 10 to 4 inches. Cone crushers take the material from a jaw crusher and further reduce the material size. Jaw crushers offer reduction ratios of up to about 6:1, while cone crushers can reduce material size up to a maximum of 8:1 ratio. The finer the crushing, the smaller the reduction ratio. As a basic rule, jaw crushers are the primary crusher taking the mined aggregate and reducing it to a size that a cone crusher can accept. Cone crushers tend to be the secondary crusher, and usually produce material of a size needed for many industry applications such as the aggregates needed for asphalt and concrete production. Jaw crusher feed diamer 0.1m to 1.5m capacity