86%(21)86% menganggap dokumen ini bermanfaat (21 suara)
8K tayangan89 halaman
The document discusses structural design concepts related to reinforced concrete, including:
1. The purpose of clear cover on reinforcement is corrosion protection. Standard clear cover values are given for slabs, beams, columns, and footings.
2. The difference between clear cover and effective cover is explained.
3. The difference between overall depth and effective depth of beams is defined, and why effective depth rather than overall depth is used in beam design.
4. Reinforcement detailing rules for slabs and requirements for stirrups in beams are outlined.
The document discusses structural design concepts related to reinforced concrete, including:
1. The purpose of clear cover on reinforcement is corrosion protection. Standard clear cover values are given for slabs, beams, columns, and footings.
2. The difference between clear cover and effective cover is explained.
3. The difference between overall depth and effective depth of beams is defined, and why effective depth rather than overall depth is used in beam design.
4. Reinforcement detailing rules for slabs and requirements for stirrups in beams are outlined.
The document discusses structural design concepts related to reinforced concrete, including:
1. The purpose of clear cover on reinforcement is corrosion protection. Standard clear cover values are given for slabs, beams, columns, and footings.
2. The difference between clear cover and effective cover is explained.
3. The difference between overall depth and effective depth of beams is defined, and why effective depth rather than overall depth is used in beam design.
4. Reinforcement detailing rules for slabs and requirements for stirrups in beams are outlined.
Submitted by : Tanya Pahwa 2K6/Arch./628 ASSIGN ON STEEL REINFORCEMENT
• What is the purpose of providing cover to
the reinforcement? Give the value of clear cover for mild exposure conditions for slabs, beams, columns, footings.
• What is the difference between clear
cover and effective cover to the reinforcement?
• What is the diff between overall depth
and effec depth of an RCC beam. Why effec depth and not overall depth is adopted in the design of beams? TABLE TABLEOF OFFLEXURE-REINFORCEMENT FLEXURE-REINFORCEMENT%% FOR DOUBLY FOR REINF DOUBLY SECTIONS REINF SECTIONS WORKING STRESS METHOD M-20 CONC MIX 1. Explain the terms: One-way slab, 2-way slab, clear span, effective span, overall depth, aspect ratio, simply supported slabs, continuous slabs, cantilever slabs. 2. Give expressions for BM along short and long span of a simply supported slab of span lx=4m, ly=6m and loaded with a udl of w KN/m2. Calc Mx and my if w=10 KN.m2. 3. Define Aspect Ratio. Explain why two-way slabs with aspect rate>=2.0 are generally designed as 1-way slabs? 4. Give general rules for detailing of reinforcement in RCC slabs. 5. Sketch typical 2-way slab, 2-way cont. slab, cantilever slabs. • Rules for providing stirrups in beams: – Dia. 8mm, 10mm, 12mm(rare). 2 or multilegged. – Designed to resist shear force in beam members. – As SF in a beam is max. at supports, spacing of stirrups is less at supports and increases at mid span. – Max spacing of stirrups=0.75d; d=effec depth of beam – For seismic areas, max spacing up to a distance of 2d from supports=d/4. For remaining portion of beam max spacing=d/2.
2014 04 14 Veterinary Instrumentation Presented The Simon Award 2014 For Outstanding Contribution in The Field of Veterinary Surgery To Michael Guilliard MA, VetMB, CertSAO, FRCVS