Sistem Kontrol DFA 12
Sistem Kontrol DFA 12
Materi 1 (DFA)
Elemen sistem instrumentasi dan kontrol
Pengenalan sistem instrumentasi dan kontrol Sejarah dan perkembangan sistem instrumentasi dan pengendalian proses Elemen-elemen sistem instrumentasi dan kontrol:
Alat pengukuran (sensor) Karakteristik sistem pengukuran Transmitter, Converter, Instrument signal transmission, Indicator, Controller, Recorder, Actuator, Control Valve
Materi 2 (DFA)
Computer Aided Control System
Gambaran umum Rangkaian elektronik sistem kontrol on-off sederhana Mikrokontroler PLC (Programmable Logic Controller) - Pengenalan PLC - Ladder Diagram SCADA (Supervisory Control And Data Acquisition) DCS (Decentralized Control System)
http://www.reuk.co.uk/LM741-Light-Dark-Sensor-Circuit.htm
http://www.ecircuitcenter.com/circuits/op_pid/op_pid.htm Software=pcbdesigner/ewb/pspice
http://www.ecircuitcenter.com/circuits/op_pid/op_pid.htm
Mikrokontroller
Minimum system Bahasa pemograman
Assembly C
PLC
Ladder Diagram
Beberapa Konvensi
Komponen-komponen dasar LD
Contoh LD
Contoh soal
Contoh soal
Contoh soal
Control
Mengendalikan
Data Acquisition
Akuisisi Data
Primitive SCADA
Supervisory
Mengawasi
Control
Mengendalikan
Data Acquisition
Akuisisi Data
Primitive SCADA
Supervisory
Mengawasi
Control
Mengendalikan
Data Acquisition
Akuisisi Data
Modern SCADA
Supervisory
Mengawasi
Control
Mengendalikan
Data Acquisition
Akuisisi Data
Modern SCADA
- Sensor dan aktuator (Field Devices) - RTU (Remote Terminal Unit ) atau PLC - Sistem Komunikasi - Master Terminal Uni
Modern SCADA
RTU VS PLC (1) A Remote Terminal Unit (RTU) an industrial data-collection device designed for operation at a remote site, which communicates data to a host system by using telemetry such as radio, dial-up telephone, or leased lines.
RTU : A standalone data acquisition and control unit, generally microprocessor based RTU primary task : To control and acquire data from process equipment at the remote location To transfer this data back to a central station.
PLC : special-purpose computer used in industrial monitoring and control applications have proprietary programming and networking protocols, and specialpurpose digital and analog I/O ports.
Modern SCADA
Sistem Komunikasi: RS 232 Private Network (LAN/RS-485) Switched Telephone Network Leased lines Internet Wireless Communication systems Wireless LAN GSM Network Radio modems
Perkembangan SCADA
1. Stand alone PLC 2. PLC with HMI (stand alone) 3. Multiple PLC with HMI (RS 485) 4. Multiple PLC with HMI (Special Bus) 5. Multiple PLC with multiple HMI 6. (Special Bus & TCP/IP) 7. Multiple PLC with multiple HMI 8.(TCP/IP)
Perkembangan SCADA
Perkembangan SCADA
Perkembangan SCADA
Perkembangan SCADA
Perkembangan SCADA
Thanks
Ref: ppt H. Wicaksono Industrial Instrumentation and Control SK Singh