DVR SYSTEMS
1|Page
DVR SYSTEMS
STEP 2: Go to http://www.myq-see.com/.
2|Page
DVR SYSTEMS
STEP 4: Enter in the required information into their respective fields and then click Submit.
STEP 5: Enter a domain name in the required field and then click Request Domain.
3|Page
DVR SYSTEMS
STEP 6: Your domain name has been set up; write down your IP address.
STEP 7: On the channel display, right click and a small control bar will appear at the bottom of the screen. Move the cursor to the Menu button and click it.
4|Page
DVR SYSTEMS
STEP 8: Move the cursor to the System button and click it.
STEP 9: Enter Login information to access the System menu. Default User name is admin and default Password is 123456 (this can be punched in on the front panel of the DVR using the digital buttons and direction keys).
5|Page
DVR SYSTEMS
6|Page
DVR SYSTEMS
STEP 13: Input the user name and password you associated with your MyQ-See domain name.
7|Page
DVR SYSTEMS
8|Page
DVR SYSTEMS
STEP 16: Enter in the DNS (you can find this on your router under Primary Domain Name Server/DNS on the status tab).
9|Page
DVR SYSTEMS
10 | P a g e
DVR SYSTEMS
STEP 20: Enter the login information that is associated with your domain name that you created.
STEP 21: Check the IP address to see if it has updated to match the external IP address of your router that you forwarded your ports to.
11 | P a g e
DVR SYSTEMS
STEP 22: On the address bar, enter in the domain name you created followed by the port that you forwarded (for example: http://example.myq-see.com:83).
STEP 23: Press the login button (note: if this screen does not come up, you may need to install ActiveX; see the ActiveX Controls guide).
12 | P a g e
DVR SYSTEMS
13 | P a g e