ST1100-UT
• Download the updated factory file, and unzip it to a USB device that has
been previously formatted to FAT32.
• After all connections are made on the back of the receiver, power it up,
and turn it on.
• Plug your USB device in to the USB port located just under the card-reader
under the front-panel door.
Now, chose the proper file, and then hit the red button on you remote to start the update process.
Unit will re-boot itself when the update is complete.
Installation -> Antenna setting, and set your sats up accordingly. Press
•
the red button after each sat is setup, in order to save the information.
Prepare
e to be am
m azed…..
• Now
w…VERY im
mportant, make SURE to hit OK
O when you
y see t he
h
abov
ve scan timer. Thatt will save your chan
nnels.
• Fina
ally, you ca
an exit ou
ut of the menus
m all the
t way, and
a park it on
a fam
miliar cha
annel and wait
w for itt to autoro
oll.