PRICE LIST
2012
APRIL 16th
Flomatic is proud to state that most valves are in full compliance with the Buy American of our facility in Glens Falls, New York, USA. Reduction of Lead in Drinking Water Act.
provisions of the ARRA. They are designed, manufactured, serviced, and supported out Complete unleaded valve product line that complies with all low lead laws
UNLEADED VALVES
G a t e s Va l v e s
C h e c k Va l v e s
C o n t r o l Va l v e s
B a l l c h e c k Va l v e s
B u t t e r f l y Va l v e s
800.833.2040
See Page: 5
Model 888S6 & 888S6R 316 Stainless Steel Wafer Style Check Valves
New stainless steel wafer style check valve ANSI 125#/250# with 316SS valve body and metal to metal seating with Buna-N optional. A Model 888ST (Stainless Steel trim) is also available with cast iron body with stainless steel metal to metal seating. Consult factory for availability.
See Page: 10
New price competitive AWWA C508 swing check valves with outside lever & weight. Replaceable metal bronze seat with epoxy coated internal and external cast iron body. Lever and weight are easily field adjustable for horizontal or vertical installation.
IN STOCK NOW!
WHATS NEW AT
See Page:11
PATENT PENDING
New special patent-pending submersible pump check valve for use with variable-frequency drive (VFD) control pumps. Standard check valves will chatter and be noisy when a VFD goes to low flow causing eventual failure. The unique Model 80DI-VFD unit is designed to minimize flow losses and hydraulic shocks in the pumping system. It features a standard epoxy coated (NSF approved powder) ductile iron body to support deep set pumps. This new, exclusive poppet system insures that the valve smoothly and automatically adjusts to flow and is noiseless at even very low flows.
www.flomatic.com
WHATS NEW AT
IN STOCK NOW!
The Congress has now passed the first lead free bill S.3874, the Reduction of Lead in Drinking Water Act, a bill that would reduce from 8 percent to 0.25 percent the amount of the lead allowed in "lead free" plumbing fixtures that touch drinking water. This is similar to the current laws in the state of California and Vermont. Flomatic has been committed to providing products that exceed the requirements of lead content for many years. Most products in this catalog have been tested and certified by IAPMO, an ANSI accredited third party to comply with the laws. Flomatic introduced the industries first unleaded bronze check valves, in 1996, which have been recognized as an acceptable material for lead free*.
* The wetted surface of this product contacted by consumable water contains less than one quarter of one percent (0.25%) of lead by weight.
Flomatic Corp. Product Certification by:
Flomatic has received certification for its stainless steel wafer style check valves Model 812X (see page 9) and pressure reducing C150E (see page 25). During 2012 other product certifications will be added. Please check our website for updates at www.flomatic.com.
IN STOCK NOW!
This product complies with the California and Vermont Low Lead Requirements
800.833.2040
See Page: 5
www.flomatic.com
II
RECOMMENDED
SUITABLE
Type of Fluid
HIGH TEMP HIGH PRESSURE HIGH VELOCITY u u u u u u u u VISCOUS SLURRY u u u u
MODEL 80DIVFD
7937VFD 7936VFD 7938VFD 7939VFD 4089VFD 4090VFD
Valve Type
Backflow Preventers Gate Valves Quarter Turn Ball Valves Enviro Check Valves Enviro Check Valves Ductile Iron Check Valves Stainless Steel Check Valves Stainless Steel Check Valves Stainless Steel Check Valves Globe Style Silent Check Valves Silent Wafer Check Valve Swing Check Valves Swing Check Valves Ball Check Valves Plastic Check Valves Plastic Check Valves Butterfly Valves Foot Valves Foot Valves Foot Valves Foot Valves Strainers Strainers Control Valves Control Valves Control Valves Control Valves Control Vavles Pump Control Regulator Air & Vacuum Valves
Valve Model
Page #
DCVE, PVB, RPZE & RPZE II NRS & OSY 605E & 601E 80E & 100E Series 80HTE Series 80DI, 82 & 100DI Series 80S6 100MSS & 80/100SS 812XTF/XFF, 816 & 816FL 402BT 888 745, 78A & 78 90/92 Series 50/508, 408,208,208B & 208T 100MP 297D/290P & 901 Sylax Ductile Iron & Stainless Steel Disc 63, 60SE, 333E & 333DPE 104P/PS, 124P, 190DP & 193D 302BT 80S6F 16/16FL 46P/S, 6P, 6SE & 46T C100 C200, C700 & C1000 Series C300 & C400 Series C500 Series C600, C800 & C900 Series Cycle Gard I, II, IV & Hy-Flow Air Release & Sewage Air Release Valves
2, 3 30,31 533 432 7,82 83 9,10,11 5,6,7 12 8 12 8 13 9 14 10 14 10 15, 16 11,12 15 11 17 13 18 14 18 14 20, 21 16,17 22, 23 18,19 22 18 23 19 23 19 24 20 24 20 26 22 26, 27 22,23 26 22 27 23 27 23 30, 31 26,27 32 ,33
800.833.2040
u u
u u u u u u u u u u u u u u u u u u u u u u u u u u u u u
u u u u u u u u u u u u u u u u u u u u u
u u
u u u
u u
u u
28,29
SIZE
Female x Female
E n v i r o C h e c k MODEL 100E
Hexed Shape F x F
MODEL 80A E
1/8'' Tap on Inlet
MODEL 80CE
4 Taps -1/8''on Inlet, 2 - 1/4'' Outlet, 1/8''Outlet
MODEL 80XBE
2 -1/4'' Taps on Outlet
MODEL 80HTE
High Temperature Poppet
MODEL 80DI
4031DI 4032DI 403DI 7937 7936 7938 7939 4089 4090
MODEL 80DIX
7938DIX 7939DIX 4089DIX 4090DIX 4091DIX 4091T 4092DIX 4092T
1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 6" 8" 10" 10" Turbo 12" 12" Turbo
5118E 5159E 4029E 4030E 4031E 4032E 4033E 4034E 4035E 4036E 4037E
5118HTE 5159HTE 4029HTE 4030HTE 4031HTE 4032HTE 4033HTE 4034HTE 4035HTE 4036HTE 4037HTE
III
www.flomatic.com
VALVES BY TYPE
TABLE OF CONTENTS
Unleaded Ball Valves Page
(Quarter Turn) 605, 601
Page
32
VALVES BY MATERIAL
TABLE OF CONTENTS
Page
30-33 31 32 20,30
Miniair, Maxiair, Wellair 28 Comboair , Sewair Series 28,29 Backflush 29 Auto-Drain - Model 70 3 13 Auto-Vac - Model 77
Butterfly Valves
Azure AWWA C504 Kwik-Close Sylax Wafer & Lug Style Sylax Electric Actuated
Page
Cast Iron
Air Gap Adapter Air Release/Vacuum Ball Check Foot Valve Globe Style Silent Check Strainer Swing Check Wafer Check
Page
32 28-29 13 18,19 10 20 11,12 9,10
Altitude C201, CF201, C205, CF205 22 Back Pressure C301, CF301 22 Cycle Gard CB152E, C3100, CI, CN Series, C152E 26,27 Float Valve C701, CF701 23 Flow Control C901, CF901 23 Hydraulic Check C1001, CF1001 23 Pressure Reducing C101, CF101, C150E 22,25 Pressure Relief C401, CF401 22 Pump Control C601, CF601 23 Solenoid Actuated C801-2, CF801-2 23 Surge Arrestor C501, CF501 23
Page
13 31 10 23 3 2,3 5,6 14 11 12
Ductile Iron
Backflow Preventers Check Valves Control Valve
Page
30,31 5-7 22-23
Galvanized
Strainers
Page
20,30
Plastic
Air Gap Adapter Ball Check In-line Check Insert Check Foot Valves Strainers Submersible Check
Page
32 13 14 14 18 20 13
Backflow Preventers
Page
Air Gap Adapter 32 Double Check Valve, DCVE 31 Reduced Pressure Zone RPZE, RPZE II, RPZSS II 30 Pressure Vacuum Breaker PVB 31 Test Kits, Test Cocks 32 Single Detector Check 30 Atmospheric Vacuum Breaker AVB 31 Carbonated Beverage Backflow Prev. CB20 31 Hose Connection Vacuum Breaker HB8 31 Dual Check Valve, 8080E, 8080SS 31 Dual Check Valve w/ Atmos. Vent 8200 31
Wafer & SS Check 895, 848, 888, 888S6 812X 816, 816F, 816HS Series 9,10
Foot Valves
Page
18 19 19 20 33 33
Stainless Steel
Foot Valve Strainers Submersible Check Wafer Check
Page
18-19 18 8 9
60SE, 333 Series, 190 Series, 124P, 104 Series, 357, 63, 812 Series, 302BT Series, Series 16, 16FL
800.833.2040
Unleaded Bronze
Foot Valves In-line Check Strainers Submersible Check
Page
18 2,3 20 2,3
Gate Valves
NRS AWWA C515, C509 OS&Y AWWA C509
Page
Strainers
6P, 46 Series, 6SE Y Strainers
Page
20 20 34
www.flomatic.com
80E
Discount Code
80ME
Discount Code
A 80AE
Discount Code
SIZE
5118E* 5159E* 4029E 4030E 4031E 4032E 4033E 4034E 4035E** 4036E** 4037E**
PART NO.
CASE QTY.
10 10 100 100 50 36 25 16
57.67 $ $ 57.97 42.18 $ 42.72 $ $ 45.85 $ 64.56 87.92 $ $ 139.39 $ 594.86 716.85 $ $ 1,246.30
LIST PRICE
$ $ $
LIST PRICE
Consult factory for bulk case quantities. * Unleaded bronze poppet. NOTE: Reduced Ported design
SIZE
PART NO.
CASE QTY.
100 50 36 25 16
LIST PRICE
SIZE
Consult factory for bulk case quantities. * Pressure Max 200 PSI ** Unleaded bronze poppet, vertical installations recommended, for horizontal installation for 21/2"-4" sizes see 80DIX.
7981E 7983E
PART NO.
WGT.
1.2 1.5
CASE QTY.
50 36
$ $
LIST PRICE
57.36 76.54
SIZE
VALVES HAVE LESS THAN 1 PSI CRACKING PRESSURE FOR HIGHER CRACKING PRESSURE SEE PAGE 9
Discount Code
7982E 7984E
PART NO.
WGT.
1.2 1.6
CASE QTY.
50 36
$ $
LIST PRICE
57.36 76.54
80BE
A 80CE
Discount Code
A 80XBE
Discount Code
SIZE
SIZE
PART NO.
CASE QTY.
100 50 36 25 16
LIST PRICE
SIZE
PART NO.
CASE QTY.
50 36 25 16
$ $ $ $
LIST PRICE
PART NO.
CASE QTY.
50 36 25 16
$ $ $ $
LIST PRICE
SIZE
PART NO.
WGT.
1 1.5 2.3 2.9
CASE QTY.
50 36 25 16
$ $ $ $
LIST PRICE
www.flomatic.com
100E
Discount Code
100ME
Discount Code
100XLE
Discount Code
100E-ENVIRO CHECK body is cast from an unleaded alloy. Hex shaped for easy wrenching, this valve features a non-spin acetal poppet, NITRILE (Buna-N) seal and stainless steel spring. Temp Max: 180F (80C) Pressure Max: 400 PSI
"* 1" 1"** 11/4 "
3/ 4
SIZE
PART NO.
WGT.
.7 1.1 1.2 1.4
CASE QTY.
100 50 50 36
$ $ $ $
LIST PRICE
100ME-ENVIRO CHECK body is cast from an unleaded alloy. Hex shaped for easy wrenching, this valve features a nonspin acetal poppet, NITRILE (Buna-N) seal and stainless steel spring. Temp Max: 180F (80C) Pressure Max: 400 PSI
1"M x 1"F 11/4"M x 1"F 11/4 "M x 1"F* 11/4 "M x 11/4 "F 11/2 "M x 11/4 "F
100XLE-ENVIRO CHECK body is cast from an unleaded alloy. Hex shaped for easy wrenching, this valve features a nonspin acetal poppet, NITRILE (Buna-N) seal and stainless steel spring. Features extra long threads for bell end PVC drop pipe. Temp Max: 180F (80C) Pressure Max: 400 PSI
1"M x 1"F 11/4"M x 11/4"F
SIZE
Consult factory for bulk case quantities. * Same body as 80E ** Extra long threads,for use with PVC pipe. Note: 1 100E not recommended for PVC drop pipe. See 80E or 100LE.
PART NO.
WGT.
.7 1.1 1.4 1.5 1.5
CASE QTY.
50 50 50 50 36
$ $ $ $ $
LIST PRICE
SIZE
4201XLE 4242XLE
PART NO.
WGT.
1 1.5
CASE QTY.
36 36
$ $
LIST PRICE
54.79 70.54
Consult factory for bulk case quantities. See page 12 for stainless steel version.
100DPE
Discount Code
www.watersystemscouncil.org
www.ngwa.org
100DPE-ENVIRO CHECK body. Dual purpose check valve, stainless steel spring and non-spin acetal poppet. Male and female threads on both ends. NITRILE (Buna-N) seal. Temp Max: 180F (80C) Pressure Max: 400 PSI
1" x 11/4 "
SIZE
4231E
PART NO.
WGT.
1.1
CASE QTY.
50
LIST PRICE
54.44
80HTE
Discount Code
A 70
Discount Code
80HTE-ENVIRO CHECK body with threaded female x female connections. Features a high temperature stainless steel poppet and VITON seal with stainless steel spring. Ideal for hot water applications. Temp Max: 300F (150C) Pressure Max: 100 PSI
" " 1/ " 2 3/ " 4 1" 1 1 /4 " 11/2 " 2" 21/2" 3" 4"
3/ 8 1/ 4
70- Auto-Drain- This 1 valve is available in bronze, stainless steel, and PVC. All internal parts are engineered composite, with a stainless steel disc and resilient seat. Temp Max: 180F (80C) Pressure Max: 400 PSI
5 PSI open pressure
MATERIAL PART NO. CASE QTY.
12 12 12
SIZE
5118HTE 5159HTE 4029HTE 4030HTE 4031HTE 4032HTE 4033HTE 4034HTE 4035HTE 4036HTE 4037HTE
PART NO.
WGT.
$ 71.83 $ 72.21 $ 54.63 $ 76.25 $ 74.04 $ 101.87 $ 148.82 $ 201.01 $ 674.90 $ 799.08 $ 1,453.33
LIST PRICE
LIST PRICE
$ 58.22 $ 68.91 $ 71.96
LIST PRICE
$ 58.22 $ 68.91 $ 71.96
www.flomatic.com
Note: 10 PSI spring require 5 gpm to close. For lower flows use 5 PSI.
www.flomatic.com
ANTI-SPIN POPPET
FLOMATIC
Industry proven design and millions in operation, the patented WCR (Warranted Check Reliability) poppet has evolved from Flomatics pioneering work in stemless poppet design to eliminate problems associated with stem guided valves.
UNLEADED VALVES
NOTE: Refer to local codes and regulations. Consult factory for deep set pumps and valve installations for material and valve tensile strength and use with VFD pumps. See www.flomatic.com for details.
4
www.flomatic.com
80DI
Discount Code
80DI8R
Discount Code
For deep set submersible pumps New pressure rating on4-8 sizes (600PSI) Heavy ductile iron body Positive reliable seating Optional break-off plug available 2 - 8
W!
NE
80DI- High strength epoxy coated ductile iron body, disc and follower with threaded female x female connection. Features a NITRILE (Buna-N) seal, stainless steel spring fasteners, and ductile iron poppet. Designed for vertical applications. Note: 1" through 1-1/2'' features acetal poppet. Temp Max: 180F (80C) Pressure Max: 400 PSI: 1-3 600 PSI: 4-8
1" 11/4 " 11/2" 2"* 21/2" 3" 4" 5" 6" 8"
80DI8R-8 Round Threads - High strength epoxy coated ductile iron body, disc and follower with threaded female x female 8 round connection. Features a NITRILE (Buna-N) seal, stainless steel spring fasteners, and ductile iron poppet. Designed for vertical applications. Temp Max: 180F (80C) Pressure Max: 400 PSI: 3 600 PSI: 4-8
SIZE
3" 4" 5" 6" 8" 7938-1 7939-1 4088-1 4089-1 4090-1
100MDI
Discount Code
PART NO.
WGT.
15 25 46 66 93
SIZE
4031DI 4032DI 4033DI 7937 7936 7938 7939 4088 4089 4090
PART NO.
WGT.
2 1 2 3 9 15 25 46 66 93
CASE QTY.
50 36 25 16 1 5 4
$ 29.88 $ 41.60 56.90 $ $ 115.00 $ 252.30 375.79 $ $ 578.66 $ 1,074.29 $ 1,334.88 $ 2,256.73
LIST PRICE
$ $ $ $ $
LIST PRICE
To order Model 80DI8R with break-off plug, add PLG to part number for 3"-8" and add $75.00 to list price of valve.
80DI-VFD
$50.00 added for composite plug installed and add pplg to end of part number.
Discount Code
100MDI- High strength epoxy coated ductile iron valve features male threaded inlet and female threaded outlet. Ideal for submersible pumps. Temp Max: 180F (80C) Pressure Max: 400PSI
11/4 "M x 1"F 11/4 "M x 11/4 "F 11/4 "M x 11/4 "F
SIZE
To order Model 80DI with break-off plug, add PLG to part number for 2"-8" and add $75.00 to list price of valve. *Longer Body with stainless steel seats available July 2012. Use break off plug 76098-2. $50.00 added for composite plug installed and add pplg to end of part number.
W!
PART NO.
WGT.
1 1.3 1.4
$ $ $
LIST PRICE
BREAK-OFF PLUG
NE
**Longer threads.
Discount Code
New Pressure Rating: Model 80DI 600 PSI 4'' 8'' sizes
Discount Code
80DIX
80DI-VFD - High strength epoxy coated ductile iron body, poppet and stainless steel guide with threaded female x female 8 round connection. Features a NITRILE (Buna-N) seal, stainless steel spring fasteners, and ductile iron poppet. Designed for vertical or horizontal applications. Temp Max: 180F (80C) Pressure Max: 400 PSI: 3 600 PSI: 4-8
2" 2 12" 3" 4" 5" 6" 8"
SIZE
PART NO.
WGT.
$ $ $ $ $ $ $
LIST PRICE
BREAK-OFF PLUG- Stainless steel construction. Threaded 3/8" to install into valve. When broken off, riser pipe drains. Temp Max: 180F (80C) Pressure Max: 400 PSI
2"* 2 1 2" 3" 4" 5"8" 10" & 12"
SIZE
PART NO.
WGT.
.17 .19 .2 .25 .3 .45
$ $ $ $ $ $
LIST PRICE
double-guided ductile iron poppet. Designed for vertical and horizontal applications. Temp Max: 180F (80C) Pressure Max: 400 PSI
3" 4"* 6"* 8"* 10" 12" NEW
SIZE
SIZE
PART NO.
WGT.
13 17 51 89 150 350
LIST PRICE
PART NO.
June 2012 2012 May 2012 Completed 2013 June 2012 2012
To order model 80 DIX with break-off plug, replace DIX with XPL in part number and add $75.00 to list price of valve. * See 80DI for high capacity flow. $50.00 added for composite plug installed and add pplg to end of part number.
See 80DI8R for API type, 8 round threads on 80DI Series Check Valves
NE
COMPOSITE BREAK-OFF PLUG- Threaded 3/8" to install into valve. When broken off, riser pipe drains. Temp Max: 180F (80C) Pressure Max: 400 PSI
3"8"
W!
SIZE PART NO.
76098P
WGT.
.1
LIST PRICE
25.00
80DI Turbo
Discount Code
80MDI
Discount Code
80DICL
Discount Code
Threaded female x female connection. High strength ductile iron body and poppet, stainless steel spring and screws, stainless steel shaft and NITRILE (Buna-N) Seal Disc. (No O-Ring Seals) Temp Max: 180F (80C) Pressure Max: 400 PSI
80MDI- High strength epoxy coated ductile iron valve features male threaded inlet and female threaded outlet. Ideal for submersible pumps.
Note: RESTRICTED FLOW - REDUCED PORTED * 80MDIX double guided poppet.
80DICL- Ductile iron check valve incorporates Certainteeds patented groove lock type pipe connections called Certa-Lok. Fusion epoxy coated inside and out including poppet assembly, this valve is corrosion resistant and unleaded. High strength ductile iron body with stainless steel spring and NITRILE (Buna-N) seal. Temp Max: 180F (80C) Pressure Max: 400 PSI
SIZE
2" 3" 4" 5" 6" 7937CL 7938CL 7939CL 4088CL 4089CL
6" 10"
SIZE
4089T 4091T
PART NO.
WGT.
46 155
$ 2,621.30 $ 5,754.00
LIST PRICE
SIZE
x x x x x x
PART NO.
CASE QTY.
6 5 4
$ $ $ $ $ $
LIST PRICE
PART NO.
WGT.
4 5 8 14 35
LIST PRICE
To order Model 80MDI with break-off plug, add PLG to part number for 4"-6" and add $75.00 to list price of valve. $50.00 added for composite plug installed and add pplg to end of part number.
80MDICL- Ductile iron check valve uses Certainteeds patented groove lock type pipe connection on outlet end, and male pipe thread for the inlet connection. Materials are the same as the 80DICL.
SIZE
2" 3" 4" 5" 6" 7937MCL 7938MCL 7939MCL 4088MCL 4089MCL
PART NO.
WGT.
4 5 8 14 35
LIST PRICE
Certa-Lok is a registered trademark with Certainteed Corporation. Note: Reduce ported poppet one size smaller. Also available in all 316SS, Model 80S6CL.
See Page 8.
Discount Code
NE
W!
82DP- Dual purpose compact ductile iron reduced ported check valve with male and female threads on both ends. High strength ductile iron body and poppet, with stainless steel spring and fasteners. Designed to fit into tight fitting wells. Temp Max: 180F (80C) Pressure Max: 400 PSI
21/2" F x 3" M* 3" F x 4" M 4" F x 5" M 5" F x 6" M
SIZE
PART NO.
WGT.
7 10 25 51
LIST PRICE
All New Heavy Duty 316 Stainless Steel or Super Duplex Stainless Steel Flanged Submersible Pump Check Valves Model 402SS. Available in 8, 12, 14 & 18. Supporting pumps up to 1,250 HP. See page 10. Consult factory for other sizes.
Note: Reduce ported poppet one size smaller. * Unleaded Bronze Poppet
www.flomatic.com
80DIA
Discount Code
A 80DIB
Discount Code
80DIA- Standard high strength epoxy coated ductile iron body with 1/8" tapped hole on inlet side. /2" features acetal poppet. Note: 1" through 11 Temp Max: 180F (80C) Pressure Max: 400 PSI
1" 11/4 " 11/2 " 2" 21/2 "* 3"* 4"*
SIZE
PART NO.
WGT.
.2 .7 1.3 5 7 10 19
CASE QTY.
50 36 25 16 1 5 4
$ $ $ $ $ $ $
LIST PRICE
80DIB- Standard high strength epoxy coated ductile iron body with 1/8" tapped hole on inlet side and 1/4" tapped hole on outlet side. /2" features acetal poppet. Note: 1" through 11 Temp Max: 180F (80C) Pressure Max: 400 PSI
1" 11/4 " 11/2 " 2" 21/2 "* 3"* 4"*
SIZE
Sizes available to 10"- CONSULT FACTORY. * New 80DIX double guided poppet. Can be installed vertical or horizontal.
PART NO.
WGT.
.2 .7 1.3 5 7 10 19
CASE QTY
50 36 25 16 1 5 4
$ $ $ $ $ $ $
LIST PRICE
Sizes available to 10"- CONSULT FACTORY. * New 80DIX double guided poppet. Can be installed vertical or horizontal.
www.flomatic.com
for Flomatic product spec sheets.
BREAK-OFF PLUG
PIPE WEIGHT BEING DROPPED
Benefits
When servicing the pump, it reduces the lifting weight, by allowing the water to drain Eliminates water splashing at the surface Simply replace the BREAK-OFF PLUG for re-installation
Features
FLOMATIC 80DI
FLOMATIC 80DI
No corrosive parts
Available for series 80DI, 80DI-VFD, 80DIX, and 80S6 See page 5 for pricing
CHECK VALVE
inch
Valve Size
BEFORE
AFTER
RISER PIPE
www.flomatic.com
Stainless steel and composite material Must be installed with teflon tape 7
10 &12 250
mm
200
150
125
100
75
inch
Length
8-1/2
mm
125
206
125
125
100
75
1-1/2 2/1/2 4 5 3 2
inch
mm
100
125
80
65
50
40
10 4 4 4
10
10
meters
1.2
1.2
1.2
100XLSS
Discount Code
100MSS
Discount Code
80SS/100SS
Discount Code
100XLSS - STAINLESS STEEL body is cast from 303 stainless steel. Hex shaped for easy wrenching, this valve features a non-spin acetal poppet, NITRILE (Buna-N) seal and stainless steel spring. Features extra long threads for special bell end PVC pipe. Temp Max: 180F (80C) Pressure Max: 400 PSI
1"M x 1" F 4201XLSS2 11/4 "M x 11/4"F 4242XLSS2
100MSS- All 303 stainless steel body. Features a high strength acetal poppet, stainless steel spring and NITRILE (Buna-N) seal. Temp Max: 180F (80C) Pressure Max: 400 PSI
"M x 1/2"F** 3/ "M x 3/ "F** 4 4 1"M x 1" F** 11/4"M x 1"F 11/4"M x 1"F* 11/4"M x 11/4"F 11/4"M x 11/4"F*
1/ 2
80SS/100SS - All 303 stainless steel one piece body. Stainless steel spring and Buna-N seal. Threaded female x female connection. Temp Max: 180F (80C) Pressure Max: 400 PSI
1"* 4201SS2* 4031SS2 1" 4201LSS2* 1"* long 11/4"* 4202SS2* 11/4" 4032SS2 4033SS2 11/2 " 2" 4034SS2 VITON seats optional, add 10% to list price. * Same body style as 100 series. See page 24 for 3/8 and 1/2 316SS check valve
SIZE
SIZE
PART NO.
VALVE OPTION:
1 1.5
WGT.
CASE QTY.
36 36
$ 58.97 $ 75.90
LIST PRICE
80SSA
STAINLESS STEEL INTERNAL POPPET SYSTEM AVAILABLE ON MOST MODELS (25% ADDER)
Discount Code
4219SS** 4218SS** 4220SS** 4221SS2 (CAST) 4221LSS2 (CAST) 4242SS2 (CAST) 4242LSS2 (CAST)
PART NO.
CASE QTY.
100 100 81 50 50 50 50
$ $ $ $ $ $ $
LIST PRICE
SIZE
PART NO.
CASE QTY.
50 50 50 36 36 25 16
80SSB
$ $ $ $ $ $ $
LIST PRICE
Discount Code
80SSC
Discount Code
80SSB- body is all 303 stainless steel one piece body with two
drilled and tapped holes; 1/8" inlet side and 1/4 " outlet side. Temp Max: 180F (80C)
1" 11/4 " 11/2" 2"
80SS WITH A TAPS - All 303 stainless steel one piece body.
This valve features a non-spin acetal poppet, NITRILE (Buna-N) seal and stainless steel spring with a 1/8" drilled and tapped hole inlet side. Temp Max: 180F (80C)
1" 11/4 " 11/2" 2"
SIZE
SIZE
PART NO.
LIST PRICE
PART NO.
CASE QTY.
50 36 25 16
LIST PRICE
80SSC- All 303 stainless steel body construction. Control Center for Submersible Pump installations with four tappings; one 1/8" inlet side, two 1/4 " outlet sides, one 1/8" outlet side with plug.
Temp Max: 180F (80C)
SIZE
1" 11/4 " 4061SS2 4062SS2
PART NO.
CASE QTY.
50 36
LIST PRICE
SIZE
SIZE
7981SS2 7983SS2
PART NO.
WGT.
1.2 1.5
CASE QTY.
50 36
LIST PRICE
$ $
69.33 96.11
80S6
PART NO.
WGT.
1 1.5 2.3 2.9
CASE QTY.
50 36 25 16
LIST PRICE
80S6CL
$ 82.21 $ 102.55
Discount Code
Discount Code
SIZE
80SSXB
7982SS2 7984SS2
PART NO.
WGT.
1.2 1.6
CASE QTY.
50 36
LIST PRICE
$ $
69.33 96.11
Discount Code
80S6CL- Stainless steel check valve incorporates Certainteeds patented groove lock type pipe connections called Certa-Lok. Stainless steel inside and out including poppet assembly. High strength stainless steel body and spring with (Buna-N) seal. Temp Max: 180F (80C) Pressure Max: 400 PSI
SIZE
Stainless steel spring, poppet and VITON seal. Temp Max: 400F (200C) Pressure Max: 400 PSI
1" 11/4" 11/2 " 2" 3" 4" 6" 8" 10"
SIZE
1 /4 " tapped holes on outlet side for pressure switch and gauge. This valve features a non-spin acetal poppet, NITRILE (Buna-N) seal and stainless steel spring. For diaphragm tanks. Temp Max: 180F (80C) Pressure Max: 400 PSI
80SSXB body is alll 303 stainless steel one piece body with two
SIZE
7961SS2 7963SS2
PART NO.
WGT.
1.2 1.6
CASE QTY.
50 36
LIST PRICE
$ 82.21 $ 102.55
PART NO.
WGT.
LIST PRICE
PART NO.
WGT.
4 5 8 35
LIST PRICE
80S6MCL- Stainless steel check valve uses Certainteeds patented groove lock type pipe connection on outlet end, and male pipe thread for the inlet connection. Materials are the same as the 80S6CL.
2" 3" 4" 6" 7937S6MCL 7938S6MCL 7939S6MCL 4089S6MCL 4 5 8 35
To order Model 80S6 with break-off plug, add PLG to part number for 3- 10 and add $75.00 to list price on valve above. $50.00 added for composite plug installed and add pplg to end of part #. 8
Certa-Lok is a registered trademark with Certainteed Corporation. Note: Poppet one size smaller.
812X
Discount Code
1 - THREADED N.P.T. 2 - SOCKET WELD SCH. 80 add 10% 3 - BUTT WELD SCH. 80 add 10% 10% add 4 - FLANGED END 150# CLASS add 10% 5 - BSPP 6 - PN 10 1 - 316 STAINLESS STEEL 2 - WCB STEEL - (carbon steel) 3 - ALLOY 20 4 - MONEL 5 - HASTELLOY C
812X WAFER STYLE CHECK VALVE- All 316 stainless steel, wafer connection ANSI 150/300. Metal to metal seating on 812X model. Temp Max: -20 F (-30C) to 660 F (350C)* Pressure Max: Metal Seating 600 PSI* NSF/ANSI 61-2010 Certified by IAPMO R&T, 2-8
812X - No Flange Face Seal
" 3/ " 4 1" 11/4" 11/2 " 2" 21/2 " 3" 4" 5" 6" 8" 8"
1/ 2
01 - PTFE AND SEAL 02 - METAL SEAT GRAPHITE SEAL add 10% 03 - STRAINER TEFLON CAP SEAL add 5% 10% add 5% 04 - STRAINER GRAPHITE CAP SEAL add add 5% 00 - STANDARD 01 - SCH. 40 WELD ENDS 02 - SCH. 5 WELD ENDS 03 - DEGREASING add 20% 04 - VACUUM SERVICE add 20% 05 - TEFLON COATED add 30% 06 - SLEEVES add 20% to list 07 - NON STANDARD CRACK PRES. add 10%
SIZE
816FC
Discount Code
B 816HS
Discount Code
2420X 2421X 2422X 2423X 2424X 2425X 2426X 2427X 2428X 2429X 2430X 2431X** 2432X
PART NO.
WGT.
.2 .3 .5 .7 1.4 2.3 3.9 5.4 7.8 20 32 67 64
$ $ $ $ $ $ $ $ $ $ $ $ $
LIST PRICE
90.40 117.35 137.34 181.96 269.77 313.23 372.42 472.49 630.05 2,311.32 2,916.96 5,060.39 5,400.29
812XT
*Consult factory for temp. & pressure rating. **230 PSI Max Consult factory for rubber seating on 112-4 valves
Discount Code
816FC- Same as 816 with adjustable spring optional tension. Consult factory for pricing and availability.
816FL
Discount Code
816HS- Same body as Model 816 witih heavy spring for higher cracking pressure.
1 1 1 1
SIZE
PART NO.
CRACKING PRESSURE
8 PSI 10 PSI 20 PSI 30 PSI
LIST PRICE
Consult factory for pricing and other end connections and body material options. *Note: the last 2 digits are the weight of the spring.
816
Discount Code
812XT- All 316 stainless steel, threaded 3 piece check valve and body. Metal to metal seating, teflon O-ring. 1 1/2"8" available with NITRILE (Buna-N) or VITON seal, add 10% to list price. 2"6" available with socket weld connection, add 25% to list. Temp Max: Metal Seating only 400F (200C)* Pressure Max: 300 PSI*
SIZE
1/ 2
816FL- All 316 stainless steel flanged Y-Type check valve. Patented Spring loaded, Teflon soft-seated plunger, optional encapsulated spring, with all 316SS internals. Temp Max: 450F (230C) Pressure Max: 600 PSI
X=1 FOR STAINLESS SIZE
1" 11/4 " 11/2 " 2" YV0014-X-0100 YV1254-X-0100 YV0154-X-0100 YV0024-X-0100
PART NO.
816- All 316 stainless steel threaded FNPT Y-Type check valve. Patented Spring loaded, Teflon soft-seated plunger, optional encapsulated spring, with all 316SS internals. Temp Max: 450F (230C) Pressure Max: 600 PSI
X=1 FOR STAINLESS SIZE
3/ 8 1/ 4
" 3/ " 4 1" 11/4 " 11/2 " 2" 21/2 " 3" 4" 5" 6" 8"
2420XT 2421XT 2422XT 2423XT 2424XT 2425XT 2426XT 2427XT 2428XT 2429XT 2430XT 2431XT**
PART NO.
WGT.
$ $ $ $ $ $ $ $ $ $ $ $
LIST PRICE
124.80 144.77 179.54 272.28 349.20 485.17 598.39 869.77 1,443.03 2,591.48 3,684.31 6,149.10
Consult factory for pricing and other end connections and body material options.
" " 1/ " 2 3/ " 4 1" 11/4 " 11/2 " 2"
PART NO.
*Consult factory for temp. & pressure rating. **230 PSI Max Also available with Butt (XB) and Socket Weld (XS) ends.
Consult factory for pricing and other end connections and body material options. 9
SIZE
PART NO.
WGT.
.2 .3 .5 .7 1.4 2.3
$ $ $ $ $ $
LIST PRICE
402BT/402BTR
Discount Code
402BT/402BTR- Cast iron body with epoxy coating. Flanged connection ANSI B16.1, class 125. Metal to metal seating with stainless steel spring. Note: Rubber seal 2''-12'', 14-24 NITRILE (Buna-N). For Model 402BTR add R to end of part number & 10% to list price. Temp Max: 180 F (80C) Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-24"
2"* 21/2 " 3" 4" 5" 6" 8"** 10" 12"** 14" 16" 18" 20" 24"
Fusion epoxy coated standard (through 12") When there is a risk of water hammer Field replaceable internal parts Double guided
This valve features a new patented sealing mechanism that eliminates leaking through the seat ring. It also supports the poppet assembly during installation.
SIZE
2239BT* 2240BT 2241BT 2242BT 2243BT 2244BT 2245BT** 2247BT 2248BT** 2249BT 2250BT 2251BT 2252BT 2254BT
PART NO.
WGT.
$ $ $ $ $ $ $ $ $ $ $ $ $ $
LIST PRICE
329.00 398.00 440.00 565.00 855.00 975.00 1,575.00 2,310.00 3,700.00 5,900.00 8,250.00 POA POA POA
ANSI 125 FLANGE: 402BT, 402BTR ANSI 250 FLANGE: 402BT2, 402BTR2
New Model 402S6T with SS-Trim, consult factory and New Model 402S6 all SS-Design
Drain back priming loop available consult factory for pricing. Also available as a Foot Valve Model 302BT and 302ST (see page 19)
888/888R
Discount Code
Discount Code
402S6/402S6T
Discount Code
ANSI B16.1, class 125. Metal to metal seating with stainless steel spring.
8" 12" 14" 18"
888/888R- New patented design. Cast iron body with epoxy coating. Wafer connection ANSI 125/250. Metal to metal seating. For drip-tight sealing use rubber sealing NSF/ANSI 61-2010 certified by IAPMO R&T. For 888ST add ST to end of part number and 25% for stainless steel trim. Temp Max: 180F (80C) Pressure Max: 200 PSI ANSI 125, 400 PSI: ANSI 250
2" 21/2 " 3" 4" 5" 6" 8" 8"** 10"*
SPLIT DISC- Cast iron body with epoxy coating and split disc design. (Model 895 SS-Disc and Model 848 Bronze-Disc) Wafer connection ANSI 125 2-12 EPDM, 14-24 NITRILE (Buna-N) , PTFE bearing. Stainless steel spring hinge pin. Lifting ring std. above 4". Temp Max: 180F (80C) Pressure Max: 200 PSI
SIZE
2" 21/2 " 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24"
WGT.
3 4 7 8 13 18 21 49 75
888S6/888S6R
SIZE
Discount Code
PART NO.
WGT.
5 7 11 18 25 36 80 85 129
LIST PRICE
$ 148.00 $ 173.00 $ 186.00 $ 239.00 $ 364.00 $ 366.00 $ 565.00 $ 832.00 $ 1,078.00 $ 2,917.00 $ 4,888.00 $ 5,785.00 $ 7,807.00 $ 11,227.00
LIST PRICE
SIZE
WGT.
SIZE
888S6/888S6R- New patented design. 316 stainless steel body. Wafer connection ANSI 125/250. Metal to metal seating. Note: Rubber seal For Model 888S6 add R to end of part number and 10%. Temp Max: 180F (80C) Pressure Max: 200 PSI ANSI 125, 400 PSI: ANSI 250
SIZE
2" 6" 8" 2434S6 2437S6 2438S6
PART NO.
WGT.
5 7 11 18 25 36 80 85 129
LIST PRICE
LIST PRICE
PART NO.
WGT.
5 39 92
LIST PRICE
Note: 2''-6'' are both ANSI 125/250 * ANSI 125 ONLY. ** 250# Flanged.
10
www.flomatic.com
78
Discount Code
78A
Discount Code
93LW
Discount Code
NE
W!
78- Cast iron body with epoxy coating. Flanged connection ANSI B16.1, class 125. Reinforced neoprene swing disc. In-line serviceable. Temp Max: 140F (60C) Pressure Max: 175 PSI: 3"-12", 150 PSI: 14"
SIZE
21/2 " 3" 4" 6" 8" 10" 12" 14"
PART NO.
2181 2182 2183 2185 2186 2187 2188 2189
WGT.
$ $ $ $ $ $ $ $
LIST PRICE
78A- Ductile iron angle body with epoxy coating. Flanged connection ANSI B16.1, class 125. Reinforced neoprene swing disc. In-line serviceable. (same as ANSI 90 elbow dimension) Temp Max: 140F (60C) Pressure Max: 175 PSI: 3"-12", 150 PSI: 14"
3" 4" 6" 8" 10" 12" 14"
93LW- Swing check valve with outside lever and weight. Cast iron body with epoxy coated. Meets AWWA C508 specifications. Flanged connection ANSI B16.1, class 125. Bronze trim with stainless steel shaft. Metal to metal seating standard. Features external lever and weight. Imported.
Temp Max: 180F (80C) Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-30"
2" 3" 4" 6" 8" 10" 12"
SIZE
PART NO.
WGT
$ $ $ $ $ $ $
LIST PRICE
SIZE
PART NO.
Note: Other seals are available that are chemically resistant especially to chloramines. Please consult factory.
WGT.
$ $ $ $ $ $ $
LIST PRICE
90LS/92LS*
All 90/92 available with limit switch, add $300 and add LS to end of part #.
Discount Code
Discount Code
90LS/92LS*- Cast iron body with epoxy primer. Meets AWWA C508 specifications. Flanged connection ANSI B16.1, class 125. Bronze trim with stainless steel shaft. Metal to metal or NITRILE (Buna-N) seal (Please specify) Features external lever and spring. Temp Max: 180F (80C) Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-30" For vertical installation add V to part number.
2" 3" 4"* 6"* 8"* 8"** 10" 12" 14" 16" 18" 20" 24" 30"
90LW/92LW- Cast iron body with epoxy primer. Meets AWWA C508 specifications. Flanged connection ANSI B16.1, class 125. Bronze trim with stainless steel shaft. Metal to metal or NITRILE (Buna-N) seal (Please specify) Features external lever and weight.
Temp Max: 180F (80C) Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-30" For vertical installation add V to part number.
2" 3" 4"* 6"* 8"* 8"** 10" 12" 14" 16" 18" 20" 24" 30"
SIZE
2704LS 2706LS 3707LS* 3709LS* 3710LS* 3710LS-18 2711LS 2712LS 2714LS 2716LS 2718LS 2720LS 2724LS 2730LS
PART NO.
46 72 119 205 359 339 537 748 1165 1645 1860 2495 3440 4975
WGT.
$ $ $ $ $ $ $ $ $ $ $ $ $ $
1,440.00 1,560.00 1,550.00 2,050.00 3,060.00 3,555.00 6,368.00 9,130.00 13,365.00 17,510.00 24,720.00 29,252.00 40,427.00 POA
LIST PRICE
SIZE
PART NO.
2704LW 2706LW 3707LW* 3709LW* 3710LW* 3710LW-18 2711LW 2712LW 2714LW 2716LW 2718LW 2720LW 2724LW 2730LW
41 71 125 224 401 380 600 843 1323 1875 2110 2841 3927 5693
WGT.
$ $ $ $ $ $ $ $ $ $ $ $ $ $
1,440.00 1,560.00 1,550.00 2,050.00 3,060.00 3,555.00 6,368.00 9,130.00 13,365.00 17,510.00 24,720.00 29,252.00 40,427.00 POA
LIST PRICE
90CS/92CS- Cast iron body with epoxy primer. Meets AWWA C508 specifications. Flanged connection ANSI B16.1, class 125. Bronze trim with stainless steel shaft. Metal to metal or NITRILE (Buna-N) seal (Please specify)Features external lever and spring. sealed end cushion closure system for adjustable rate of valve closure. Temp Max: 180F (80C) Pressure Max: 200 PSI: 3"-12", 150 PSI: 14"-30" For vertical installation add V to part number.
SIZE
2 3" 4"* 6"* 8"* 8"** 10" 12" 14" 16" 18" 20" 24" 30"
PART NO.
2704CS 2706CS 3707CS* 3709CS* 3710CS* 3710CS-18 2711CS 2712CS 2714CS 2716CS 2718CS 2720CS 2724CS 2730CS
47 98 195 325 455 435 780 1073 1495 2119 2386 3211 4440 4975
WGT.
$ $ $ $ $ $ $ $ $ $ $ $ $ $
2,500.00 3,030.00 3,412.00 3,945.00 5,039.00 5,489.00 8,425.00 12,914.00 13,812.00 19,555.00 26,766.00 29,862.00 42,000.00 POA
LIST PRICE
Stainless steel seats optional on Model 92 only, add 10% to list price.*92 series 4", 6" and 8. Epoxy coated blue. Model 90 is TMEMIC red primer N-140.
11
745
Discount Code
745BF
Discount Code
745PI
Discount Code
745- 45 Seat Flo-Flex, Swing Check Valve Epoxy coated Ductile Iron Body, ANSI B16.1, class 125, ANSI/AWWA C508, Buna-N Coated Disc. Temp Max: 140F (60C) Pressure Max: 250 PSI
2" 21/2 " 3"* 4"* 5"* 6" 8" 10" 12" 14" 16" 18" 20" 24"
SIZE
PART NO.
2380 2381 2382 2383 2384 2385 2386 2387 2388 2390 2391 2392 2393 2394
745BFPI
27 35 40 68 105 128 235 380 620 740 1,035 1,540 1,835 2,475
WGT.
$ 380.00 $ 450.00 $ 470.00 $ 552.30 $ 750.00 $ 850.00 $ 1,400.00 $ 2,600.00 $ 3,602.00 $ 5,350.00 $ 7,179.00 $ 8,302.00 $10,300.00 $16,300.00
LIST PRICE
745 WITH BACKFLUSH DEVICE- 45 Seat Flo-Flex, Swing Check Valve Epoxy coated Ductile Iron Body, ANSI B16.1, class 125, ANSI/AWWA C508, Buna-N Coated Disc. Temp Max: 140F (60C) Pressure Max: 250 PSI
2" 21/2 " 3"* 4"* 5"* 6" 8" 10" 12" 14" 16" 18" 20" 24"
745 WITH POSITION INDICATOR- 45 Seat Flo-Flex, Swing Check Valve Epoxy coated Ductile Iron Body, ANSI B16.1, class 125, ANSI/AWWA C508, Buna-N Coated Disc. Temp Max: 140F (60C) Pressure Max: 250 PSI
3"* 4"* 5"* 6" 8" 10" 12" 14" 16" 18" 20" 24"
SIZE
Discount Code
2380BF 2381BF 2382BF 2383BF 2384BF 2385BF 2386BF 2387BF 2388BF 2390BF 2391BF 2392BF 2393BF 2394BF
PART NO.
27 35 40 68 105 128 235 380 620 740 1,035 1,540 1,835 2,475
WGT.
$ $ $ $ $ $ $ $ $ $ $
LIST PRICE
607.00 669.00 672.00 789.00 1,172.00 1,188.00 1,886.00 3,034.00 4,355.00 6,420.00 8,325.00 POA POA POA
SIZE
2382PI 2383PI 2384PI 2385PI 2386PI 2387PI 2388PI 2390PI 2391PI 2392PI 2393PI 2394PI
PART NO.
40 68 105 128 235 380 620 740 1,035 1,540 1,835 2,475
WGT.
$ $ $ $ $ $ $ $ $
LIST PRICE
722.00 792.00 941.00 1,107.00 1,600.00 2,668.00 3,918.00 5,593.00 7,453.00 POA POA POA
745LS
Add S to end of part number for Stainless Steel fasteners. 10% mark up. Discount Code
Ductile Iron Body, ANSI B16.1, class 125, ANSI/AWWA C508, Buna-N Coated Disc. Temp Max: 140F (60C) Pressure Max: 175 PSI: 3-12 250 PSI: 14- 24
3"* 4"* 5"* 6" 8" 10" 12" 14" 16" 18" 20" 24"
745 WITH POSITION INDICATOR AND BACKFLUSH DEVICE- 45 Seat Flo-Flex, Swing Check Valve Epoxy coated 745 WITH LIMIT SWITCH (SPDT) - 45 Seat Flo-Flex, Swing Check Valve Epoxy coated Ductile Iron Body, ANSI B16.1, class 125, ANSI/AWWA C508, Buna-N Coated Disc. Temp Max: 140F (60C) Pressure Max: 175 PSI: 3-12 250 PSI: 14- 24
3"* 4"* 5"* 6" 8" 10" 12" 14" 16" 18" 20" 24"
SIZE
2382BFPI 2383BFPI 2384BFPI 2385BFPI 2386BFPI 2387BFPI 2388BFPI 2390BFPI 2391BFPI 2392BFPI 2393BFPI 2394BFPI
PART NO.
40 68 105 128 235 380 620 740 1,035 1,540 1,835 2,475
WGT.
$ $ $ $ $ $ $ $ $
LIST PRICE
937.20 1,051.00 1,321.00 1,449.00 2,161.00 3,312.00 4,622.00 6,691.00 8,581.00 POA POA POA
SIZE
Note: Other seals are available that are chemically resistant especially to chloramines. Please consult factory.
12
2382LS 2383LS 2384LS 2385LS 2386LS 2387LS 2388LS 2390LS 2391LS 2392LS 2393LS 2394LS
PART NO.
42 70 107 130 237 382 622 742 1,037 1,542 1,837 2,477
WGT.
$ $ $ $ $ $ $ $ $
LIST PRICE
1,072.00 1,142.00 1,291.00 1,457.00 1,950.00 3,018.00 4,268.00 5,943.00 7,803.00 POA POA POA
Backflush device (Model 745BF) Fusion Epoxy Coated Ductile Iron Body
745 Features
Buna-N Coated Disc. Optional Backflush Device Available Optional Disc Position Indicator Available Optional Proximity Switch Model 745PS
www.flomatic.com
508
Discount Code
Discount Code
77
Discount Code
NE
W!
508- Cast iron body with epoxy coating. Threaded female x female connection. Corrosion resistant phenolic Sinking Ball 2 Bolt access cover. Also available with Floating Ball for flood control or air ventadd FB to part number and 35% to list price. Temp Max: 180F (80C) Pressure Max: 150 PSI
1" 11/4" 11/2" 2" 21/2" 3" 4"*
408 & 4082- Cast iron body with epoxy coating and access port, flanged connection ANSI B16.1, class 125. NITRILE (Buna-N) covered metal ball. Sinking Type, stainless steel fasteners. Also available with Floating Ball for flood control or air ventadd FB to part number and 35% to list price. Standard of the Wastewater Industry Temp Max: 180F (80C) Pressure Max: 150 PSI
3"* 4"* 5" 6" 6"* 8" 10" 12" 14"
77- Auto-Vac Vacuum Breaker - This 1 valve is available in bronze, stainless steel, and PVC. All internal parts are engineered composite, with a stainless steel disc and resilient seat. Used to prevent water hammer in wastewater valves. Temp Max: 180F (80C) Pressure Max: 400 PSI
4701P PVC 4701 Bronze Stainless Steel 4701SS
SIZE
PART NO.
WGT.
$ $ $ $ $ $ $
LIST PRICE
SIZE
Note: 3" and 4", has no access cover, quick disconnect valve system.
208
Discount Code
*New 4082 model meets AWWA C508 flange to flange lay lengths, and are ductile iron.
PART NO.
WGT.
LIST PRICE
MATERIAL
PART NO.
CASE QTY.
12 12 12
LIST PRICE
Discount Code
208T
NE
W!
208- Cast iron body with epoxy coating and clean-out port. Threaded female x female connection. Features NITRILE (Buna-N) Sinking Ball. Temp Max: 180F (80C) Pressure Max: 150 PSI
11/4" 11/2" 2"
408PRX & 4082 PRX- Model 408 ball check valve with a
Pressure Max: 150 PSI
WGT.
45 62 90 102 122 218 355 624 882 $ 1045.00 $ 1199.00 $ 1,947.00 $ 2,136.00 *$ 1,896.00 $ 3,380.00 $ 7,368.00 $10,406.73 $15,359.73
SIZE
PART NO.
WGT.
4.5 9.5 9
$ $ $
LIST PRICE
SIZE
PART NO.
LIST PRICE
208T- Corrosion resistant PVC body. Threaded female x female connection. NITRILE (Buna-N) self-cleaning ball E-Z access port with NITRILE (Buna-N) seal. Also available with socket weldchange part number from T to Ssame pricing. Temp Max: 150F (65C) Pressure Max: 100 PSI
1" 11/4" 11/2" 2"
SIZE
PART NO.
WGT.
1 1 2 2
$ $ $ $
LIST PRICE
Note: For BSPP threads, change part number from T to P. NOT FOR GROUND BURIAL.
*New 4082 model meets AWWA C508 flange to flange lay lengths, and are ductile iron.
208B
Discount Code
Horizontal installation requires a 20 static head on Ball Checks Recommended for flow velocity of 3 to 5 per sec. For higher flow, consult factory.
208B- Same as Model 208 with bosses for rail mounting. Cast iron body with epoxy coating and clean-out port. Threaded female x female connection. Features NITRILE (Buna-N) Sinking Ball. Temp Max: 180F (80C) Pressure Max: 150 PSI
11/4" 11/2" 2"
ARRA-Compliant
SIZE
www.flomatic.com
13
PART NO.
5 10 10.5
WGT.
$ $ $
LIST PRICE
100MP
Discount Code
901
Discount Code
P R O D U C T A P P L I C AT I O N 9 0 1
Insert connection used in conjunction with a water meter when protection from contamination is required.
MODEL 901
100MP- High-strength Noryl GTX 830 Body with NITRILE (Buna-N) seal and polypropylene follower. Threaded male x female connection. Temp Max: 150F (65C) Pressure Max: 300 PSI
901- Non-corrosive acetal body and guide. Insert connection. Features NITRILE (Buna-N) seal and stainless steel spring. Temp Max: 180F (80C) Pressure Max: 150 PSI
SIZE
" 1/" 2 3/ " 4 1"
3/ 8
PART NO.
2011 2000 2001 2030
WGT.
.1 .18 .35 .5
SIZE
4221MP 4242MP
PART NO.
CASE QTY.
49 49
$ 19.00 $ 24.00
LIST PRICE
LIST PRICE
www.awwa.org
Discount Code
LIVE CHAT
The 297D- is an acetal body. Threaded female x female construction. Features a VITON seal, Nylon 11 poppet and stainless steel spring. Temp Max: 180F (80C) Pressure Max: 150 PSI
SIZE
" 1/" 2
3/ 8
3D ANIMATIONS
SHIPMENT TRACKING
PART NO.
5359 5239
.04 .06
WGT.
$ 25.00 $ 30.00
LIST PRICE
The 290P is a Polypropylene body and poppet with stainless steel spring and VITON seal.
SIZE
" 1/" 2 3/" 4
3/ 8
PART NO.
5356 5357 5358
WGT.
LIST PRICE
www.flomatic.com
www.flomatic.com
14
AWWA C504:
Seat Buna-N
V-type packing
AZURE
Discount Code
AZURE
Discount Code
MODEL 45 (Lever Operated) - Cast ductile iron flanged body. ASTM A536 Cast ductile iron disc with stainless type 316 edge. Seat, standard NBR (EPDM optional) bonded and vulcanized.Designed to AWWA standard C504, class 150B. Electric/pneumatic actuation available.
Working Temp: Max+180F (82C)
SIZE
3" 4" 6"
Discount Code
SMART CARD
PART NO.
450100061 450100071 450100091
AZUREBUTTERFLY w/ACTUATOR
Discount Code
Discount Code
MODEL 45 - Electric actuated, Azure butterfly valve, 110 vac power, manual handwheel override for open/close service. SMART CARD - New digital high resolution controller for
use in the Flomatic FCEL Series Electric Actuators. The DHC-100 is a high resolution controller/positioner: for use in the FCEL series AC electric actuators with operating times from 2 to 120 seconds that can be configured for various command types (4-20mA, 1-5V, 0-5V, 0-10V, or a digital command) and a fail position on loss of signal With its modular design a variety of options are easily plugged in providing other features. A wide range of data is accessible through a digital communications module providing additional control and information.
SIZE
3" 4" 6" 8" 10" 12"
WGT.
61 72 82 165 220 300
SERIES 6000
WGT.
8 9 13 18 37 51 68 80 137
www.flomatic.com
15
Discount Code
Discount Code
Gear
OPTIONS:
149G (DUCTILE IRON DISC) - SYLAX Full Lug Series Cast iron body with epoxy coated ductile iron disc. Seat Liner EPDM (Buna-N optional) with standard ISO top flange for direct mounting of actuator.
Working Temp: Max+230F (+110C) Pressure Max: 200 PSI
SIZE
2" 21/2 " 3" 4" 5" 6" 8" 10" 12"
149G (DUCTILE IRON DISC)- SYLAX Wafer Style Series Cast iron body with epoxy coated ductile iron disc. Seat Liner EPDM (Buna-N optional) with standard ISO top flange for direct mounting of actuator.
Working Temp: Max+230F (+110C) Pressure Max: 200 PSI
SIZE
2" 21/2 " 3" 4" 5" 6" 8" 10" 12" 149G 149G 149G 149G 149G 149G 149G 149G 149G
OPTIONAL SEATS:
Buna-N Viton PTFE (Different valve body)
Shaft extensions
WGT
9 11 12 19 22 26 51 61 93
$ $ $ $ $ $ $ $ $
$ $ $ $ $ $ $ $ $
WGT
8 8 9 13 17 18 37 51 73
$ $ $ $ $ $ $ $ $
$ $ $ $ $ $ $ $ $
Discount Code B
Discount Code
GEAR OPERATOR
Discount Code
149G (316SS DISC) - SYLAX Full Lug Series - Cast iron body with 316 stainless steel disc. Seat Liner EPDM (Buna-N optional) with standard ISO top flange for direct mounting of actuator. Working Temp:Max+230F (+110C) Pressure Max: 200 PSI
SIZE
2" 21/2 " 3" 4" 5" 6" 8" 10" 12" 149G037300 149G037302 149G037303 149G037305 149G037306 149G037307 149G037308 149G037309 149G037310
149G (316SS DISC)- SYLAX Wafer Style Series - Cast iron body with 316 stainless steel disc. Seat Liner EPDM (Buna-N optional) with standard ISO top flange for direct mounting of actuator.
Working Temp: Max+230F (+110C) Pressure Max: 200 PSI
SIZE
2" 21/2 " 3" 4" 5" 6" 8" 10" 12" 149G 149G 149G 149G 149G 149G 149G 149G 149G
Gear Operators for Sylax Butterfly Valves Add G to Lever Operated part number for a gear operated valve. With position indicator on top of gear box.
Up to 24 available CONSULT FACTORY.
WGT
9 11 12 19 22 26 51 61 93
WGT
8 8 9 13 17 18 37 51 57
$ $ $ $ $ $ $ $ $
16
www.flomatic.com
BUTTERFLY VALVE
Series 6000
SYLAX FULL LUG SERIES 149GA
Body: Cast Iron Disc: Epoxy Coated Ductile Iron Seat Liner: EPDM
149G 149G 149G 149G 149G 149G 149G 149G 149G
SIZE
2" 21/2 " 3" 4" 5" 6" 8" 10" 12"
WGT.
33 35 36 46 46 53 103 125 159 $ $ $ $ $ $ $ $ $
LIST PRICE
1,782.00 1,788.00 1,799.00 1,881.00 1,907.00 2,372.00 3,021.00 3,617.00 4,337.00
SIZE
2" 21/2 " 3" 4" 5" 6" 8" 10" 12"
WGT.
33 35 36 46 46 53 103 125 159
LIST PRICE
$ $ $ $ $ $ $ $ $ 1,799.00 1,807.00 1,820.00 1,905.00 1,937.00 2,406.00 3,087.00 3,736.00 4,477.00
PNEUMATIC ACTUATED
Pneumatic Actuated
2-24 Double Acting and Spring Return
Price on Application
CHAINWHEEL OPTION
SIZE
2" 21/2 " 3" 4" 5" 6" 8" 10" 12"
WGT.
33 35 36 46 46 53 103 125 159 $ $ $ $ $ $ $ $ $
LIST PRICE
1,774.00 1,779.00 1,790.00 1,871.00 1,894.00 2,357.00 2,990.00 3,561.00 4,286.00
SIZE
2" 21/2 " 3" 4" 5" 6" 8" 10" 12"
WGT.
32 32 33 37 41 45 98 115 149 $ $ $ $ $ $ $ $ $
LIST PRICE
1,790.00 1,796.00 1,810.00 1,893.00 1,921.00 2,388.00 3,051.00 3,674.00 4,407.00
Chainwheel Option
2-24 (Use with gear option)
Price on Application
www.flomatic.com
17
60SE
Discount Code
333E
Discount Code
333DPE
Discount Code
60SE-ENVIRO FOOT VALVE- body with threaded female connection. Features a NITRILE (Buna-N) seal, acetal poppet (21/2", 3" and 4" have bronze poppets) stainless steel spring and strainer. Temp Max: 180F (80C) Pressure Max: 250 PSI (1/2" size 150 PSI)
1/2"* 3/4" 1" 11/4"** 11/4" 11/2 " 2" 21/2 " 3" 4"
333E-ENVIRO FOOT VALVE- body with high strength acetal poppet. Tappered stainless steel strainer, end cap, spring and fasteners. NITRILE (Buna-N) seal. Temp Max: 180F (80C) Pressure Max: 250 PSI
1" 11/4"
333DPE-ENVIRO FOOT VALVE- body, but with dual purPressure Max: 250 PSI
.5 .8
SIZE
PART NO.
WGT.
CASE QTY.
50 36
SIZE
5820E* 4100E 4101E 4102E** 4103E 4104E 4105E 4106E 4107E 4108E
PART NO.
WGT.
.1 .3 .8 .8 1 1.6 2.1 6 11 19
CASE QTY.
10 100 50 50 36 25 16
$ $ $ $ $ $ $ $ $ $
LIST PRICE
SIZE
34.24 38.24 42.49 48.22 51.29 82.75 131.28 435.07 599.90 998.20
4171E 4172E
PART NO.
WGT.
.6 .8
CASE QTY.
50 36
$ $
LIST PRICE
43.32 52.25
$ $
LIST PRICE
47.67 56.74
333SS
Discount Code
124P
Discount Code
*Polyethylene strainer **Model 600S (4102E) will pass through a 2" pipe.
190D/193D/190P
Discount Code
333SS- FOOT VALVE- All 303 Stainless steel body with high strength acetal poppet. Tappered stainless steel strainer, end cap, spring and fasteners. NITRILE (Buna-N) seal. Temp Max: 180F (80C) Pressure Max: 250 PSI
1" 11/4"
124P- features a simple flow through design with corrosion resistant parts. Durable Nylon body that has a 4 in 1 combo feature (3/4'' 1-1/2'') Temp Max: 140F (60C) Pressure Max: 150 PSI
3/4" - 11/2" 2"
SIZE
4171E 4172E
PART NO.
WGT.
.6 .8
CASE QTY.
50 36
$ $
LIST PRICE
54.15 65.32
SIZE
190D- Acetal body and strainer, Nylon 11 poppet. Stainless steel spring and NITRILE (Buna-N) seal. 193D- Similar to the 190D with one-piece acetal body and strainer. 190P- Polypropylene body and strainer. Stainless steel spring and VITON seal.
3/8" 3/8" 1/2" 1/2" 3/4" 11/2" 2"
104P
Discount Code
A 104PS
5728P 5725P
PART NO.
23.76 41.05
Discount Code
SIZE
PART NO.
5619 5726 5620 5727 5728 5724 5725
MODEL
$ $ $ $ $ $ $
LIST PRICE
104P- Reinforced nylon body with threaded female connection. Polyethylene strainer, polyethylene/acetal poppet. NITRILE (Buna-N) seal and stainless steel spring. Temp Max: 150F (65C) Pressure Max: 150 PSI
3/4 " 1" 11/4"
104PS- Features rugged high-strength noryl GTX 830 valve body with a tapered stainless steel, NITRILE (Buna-N) seal and polypropylene follower. Temp Max: 140F (60C) Pressure Max: 150 PSI
1 "
1/ 4
SIZE
PART NO.
WGT.
.08 .13 .21
CASE QTY.
10 50 36
$ $ $
LIST PRICE
SIZE
5733PS
PART NO.
WGT.
.21
CASE QTY.
36
LIST PRICE
28.00
18
www.flomatic.com
357
Discount Code
A 63
Discount Code
B 812XTF
Discount Code
357- Cast iron body and strainer. Threaded female connection. Hinged leather seat. Temp Max: 80F (27C) Pressure Max: 75 PSI
11/4 " 11/2 " 2" 3" 4" 6" 8"
SIZE
PART NO.
WGT.
3 3 6 13 20 45 99
LIST PRICE
63- Cast iron body with epoxy coating. Features threaded female connection. NITRILE (Buna-N) seal, high strength non-metallic or unleaded bronze or ductile iron poppet, stainless steel spring. Heavy duty polyethylene strainer. Temp Max: 180F (80C) Pressure Max: 250 PSI
2" 21/2 " 3" 4" 6"*
SIZE
PART NO.
WGT.
4 5 9 17 36
$ $ $ $ $
LIST PRICE
812XTF- All 316 stainless steel, threaded female connection. Metal to metal seating and teflon O-ring. 2"-4" available with socket weld connection.Consult factory for pricing.11/2"-4" available with NITRILE (Buna-N) or VITON seal, add 10% to list (Model 812XRF/812XVF). Temp Max: 400F (200C) Pressure Max: 300 PSI
1/2 " 3/4 " 1" 11/4" 11/2 " 2" 21/2 " 3" 4" 5" 6" 8"
SIZE
NOTE: 2" Acetal guide. 2 1/2" - Unleaded bronze guide. 3"-6" Ductile iron poppet. * Galvanized Strainer Only.
2420XTF 2421XTF 2422XTF 2423XTF 2424XTF 2425XTF 2426XTF 2427XTF 2428XTF 2429XTF 2430XTF 2431XTF
PART NO.
WGT.
2 4 5 9 12 14 14 25 39 62 80 140
$ $ $ $ $ $ $ $ $ $ $ $
LIST PRICE
300.00 370.00 551.00 671.00 744.00 885.00 1,548.00 1,783.00 2,030.00 4,323.00 5,148.00 9,000.00
Discount Code
Discount Code
Discount Code
812XFF- All 316 stainless steel. Flanged connection ANSI 150. Metal to metal seating and teflon O-ring. 11/2"- 4" available with NITRILE (Buna-N) or VITON seal, add 10% to list (Model 812XRF/812XVF). Temp Max: 300F (150C) Pressure Max: 275 PSI
1/2 " 3/4 " 1" 11/4" 11/2 " 2" 21/2 " 3" 4" 5" 6" 8"
302BT- Cast iron body with epoxy coating, bronze disc and seat (2"-12"). Flanged connection ANSI B16.1, class 125. Features a VULCANIZED Viton seal and stainless steel strainer. Temp Max: 180F (80C) Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-24"
2" 21/2 " 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24"
80S6F - Foot Valve- All 316 stainless steel threaded check valve body. Stainless steel spring, poppet, strainer and VITON seal. Temp Max: 400F (200C) Pressure Max: 400 PSI
1" 11/4" 11/2 " 2" 3" 4" 6" 8" 10"
SIZE
SIZE
2420XFF 2421XFF 2422XFF 2423XFF 2424XFF 2425XFF 2426XFF 2427XFF 2428XFF 2429XFF 2430XFF 2431XFF
PART NO.
WGT.
$ 380.00 $ 488.00 $ 733.00 $ 840.00 $ 949.00 $ 1,251.00 $ 1,726.00 $ 2,053.00 $ 2,801.00 $ 5,591.00 $ 7,450.00 $12,559.00
LIST PRICE
SIZE
4763BT 4768BT 4769BT 4770BT 4771BT 4772BT 4774BT 4775BT 5416BT 5417BT 5418BT 5419BT 5420BT 5422BT
PART NO.
WGT.
$ $ $ $ $ $ $ $ $ $ $ $ $ $
925.00 935.00 940.00 1,111.00 1,509.00 1,694.00 2,500.00 3,432.00 4,800.00 9,200.00 11,600.00 POA POA POA
LIST PRICE
PART NO.
WGT.
LIST PRICE
Also available as model 302S6T with 316SS trim and model 302S6 all 316SS design.
www.flomatic.com
19
16FL STRAINER
Discount Code
16 STRAINER
Discount Code
6P STRAINER
Discount Code
16FL STRAINER- All 316 Stainless steel body, flanged with 316SS internal strainer. Standard 20 mesh replacement screens optional 40, 60, 80 and 100 mesh screens (fit inside of 20 mesh). ASME 150 Class.
Standard 20 Mesh if optional 40, 60, 80, or 100 add to end of part number: 40 Mesh = 040 to end of part number 60 Mesh = 060 to end of part number 80 Mesh = 080 to end of part number 100 Mesh = 100 to end of part number X in part # below 1 for stainless steel and 2 for carbon *Temp Max: 800F *Pressure Max: 600 PSI
STAINLESS LIST PRICE CARBON LIST PRICE *See temperature/pressure rating.
1" 11/2 " 2" 21/2 " 3" 4"
16 STRAINER- All 316 Stainless steel body, threaded FNPT Y-Type strainer. Standard 20 mesh replaceable screens optional 40, 60, 80 and 100 mesh screens (fit inside of 20 mesh). ASME 600 Class.
Standard 20 Mesh if optional 40, 60, 80, or 100 add to end of part number: 40 Mesh = 040 to end of part number 60 Mesh = 060 to end of part number 80 Mesh = 080 to end of part number 100 Mesh = 100 to end of part number X in part # below 1 for stainless steel and 2 for carbon *Temp Max: 800F *Pressure Max: 600 PSI
*See temperature/pressure rating. SIZE PART NO. STAINLESS LIST PRICE CARBON LIST PRICE
6P STRAINER- Plastic (polyethylene) with male NPT threads. Converts a check valve to a foot valve. (See picture above). Temp Max: 180F (80C)
STRAINER ONLY
3/4" 1" 11/4" 11/2 "
SIZE
SIZE
PART NO.
$ $ $ $ $ $
6SE STRAINER
Strainers supplied with FNPT tapped retainer cap for blow off outlet. Strainers supplied with PTFE cap seal. Optional graphite list price cap seal adder: $15.00
$ $ $ $ $ $ $ $
$ $ $ $ $ $ $ $
46T STRAINER
PART NO.
WGT.
.1 .1 .2 .3
CASE QTY.
25 25 25 10
$ $ $ $
LIST PRICE
5.75 6.02 6.77 6.77
Discount Code
Discount Code
46 STRAINER
Strainers supplied with FNPT tapped retainer cap for blow off outlet. Strainers supplied with PTFE cap seal. Optional graphite list price cap seal adder: $15.00 Many different types of configurations available.
Discount Code
46T STRAINER- Cast iron body with epoxy coating. Threaded female connection. Removable polyethylene strainer. Temp Max: 180F (80C)
2" 21/2 " 3" 4"
SIZE
PART NO.
WGT.
2.5 4 8.2 14
$ $ $ $
LIST PRICE
6SE STRAINER- Unleaded bronze body with threaded female connection. Stainless steel strainer with unleaded bronze. Stainless steel or plastic caps.
1/2" 3/4" 1" 11/4"* 11/2 "* 2"* 21/2 " 3" 4"
STRAINERS
46 STRAINER- Cast iron body with epoxy coating. Flanged connection ANSI 125. Plastic or stainless steel strainer. P: Plastic 2"-4" S: Stainless steel 5"-24"
2" 21/2 " 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24"
Discount Code
SIZE
6SS STRAINER
PART NO.
WGT.
.1 .2 .6 .6 1.2 2.4 3 7.2 14
CASE QTY.
10 100 49 36 25 16
$ $ $ $ $ $ $ $ $
LIST PRICE
SIZE
Discount Code
5814P 5815P 5816P 5817P 5821S 5822S 5824S 5825S 5826S 5827S 5828S 5829S 5830S 5832S
PART NO.
WGT.
$ $ $ $ $ $ $ $ $ $ $ $ $ $
LIST PRICE
165.00 167.00 220.00 350.00 447.00 488.00 728.00 1,150.00 1,589.00 2,524.00 3,225.00 4,043.00 4,177.00 5,513.00
STRAINER- Unleaded Bronze body, 20 mesh (50 mesh 3/8 " & 1/2'') stainless steel strainer. Furnished with clean out plug.
Pressure Max: 200 PSI WOG 125 PSI STEAM
SIZE Threaded
3/8" 1/2" 3/4" 1" 11/4" 11/2 " 2" 21/2 "* 3"* 4"* 6"* 8"*
PART NO.
8711E 8712E 8713E 8714E 87142E 87143E 87144E 87145* 87146* 87147* 87148* 87149*
WGT.
.5 .3 2 4 5 6 9 15 25 95 185 299
LIST PRICE
$ 32.00 $ 35.00 $ 55.00 $ 63.00 $ 112.00 $ 145.00 $ 250.00 $ 267.00 $ 340.00 $ 610.00 $ 987.00 $ 1,840.00
6SS STRAINER- All 303 stainless steel body with threaded female connection. Stainless steel strainer with unleaded bronze. Stainless steel or plastic caps.
1" 11/4"*
SIZE
4301SS .6 4302SS * .6
PART NO.
WGT.
CASE QTY.
49 36
$ $
LIST PRICE
49.00 59.00
20
www.flomatic.com
Up to 36''
4 Different Body Configurations.
Model C
Full port globe style
(flanged or threaded)
Model CF
Reduced port globe style
(flanged or threaded)
Model CA
Angle body globe style
(flanged or threaded)
Model CFA
Angle body, reduce port globe style
(flanged or threaded)
www.flomatic.com
Pressure Reducing Valve Modulating Altitude Valve Non-Modulating Altitude Valve Back Pressure Sustaining Valve Pressure Relief Valve Surge Arrestor Valve Pump Control Valve Pilot Operated Float Valve Solenoid Control Valve Flow Control Hydraulic Check Valve
21
C101 THREADED/CF101/C101/CA101
Discount Code
C201/CA201
Discount Code
PRESSURE REDUCING VALVE - Reduces high upstream pressure to lower downstream pressure. CONSULT FACTORY for control valve
price list for specific options.
SIZE C THREADED LIST PRICE CF FLANGED LIST PRICE 150# CF FLANGED LIST PRICE C/CA LIST PRICE 150# SIZE 150# C THREADED
11/2 " 3" 4" 10" 12" 8" 6" 11/4" C101B0B00100 $ 1,208 C101C0B00100 $ 1,230 C101D0B00100 $ 1,240
CF FLANGED LIST PRICE SIZE C THREADED LIST PRICE C/CA LIST PRICE C/CA LIST PRICE SIZE 150# 150# C FLANGED C FLANGED 300# 150#
2" C101D1B00100 $ 1,561 C101D2B00100 $ 1,633 21/2" C101E1B00100 $ 1,638 C101E2B00100 $ 1,856 3" 4" 6" C101F1B00100 $ 1,676 C101F2B00100 $ 1,894 C101J1B00100 $ 3,402 C101J2B00100 $ 3,680 C101G1B00100 $ 2,154 C101G2B00100 $ 2,326 11/2 " C101C1B00100 $ 1,316 C101C2B00100 $ 1,516
MODULATING ALTITUDE VALVE - Single acting level control with modulation for final filling of storage tanks. CONSULT FACTORY for control valve price list for specific options.
SIZE THREADED CF MODEL* 150#
11/2" $2,330 $ 3,121 2" $ 3,439 1 " 1/ 2 " 2 2 $ 3,724 2/ 3" 3" 4" 4" 6" 6" 8" 8" 10" 10" 12" 12"
2" 21/2"
C101E0B00100 $ 1,545 CF101E1B00100 $ 1,544 CF101F1B00100 $ 1,576 CF101K1B00100 $ 4,137 CF101G1B00100 $ 1,681 CF101J1B00100 $ 2,557 CF101L1B00100 $ 6,060 CF101M1B00100 $10,375
10" C101L1B00100 $ 8,127 C101L2B00100 $ 8,876 12" C101M1B00100 $13,365 C101M2B00100 $13,928
$2,200 3,246 $ $ 3,521 $ 3,898 $ 3,946 $ 4,617 $ 5,715 $ 8,215 $ 9,063 $ 13,779
$2,465 3,450 $ $ 3,767 $ 4,171 $ 4,223 $ 4,940 $ 6,115 $ 8,790 $ 9,697 $ 14,744
C301/CA301
Discount Code B
C401/CA4 01
BACK PRESSURE SUSTAINING VALVE - Sustains a minimum upstream pressure to prevent overdrafting the supply. CONSULT FACTORY for control valve price list for specific options.
11/4" 11/2 " 2" 21/2" 3" 4" 6" 8" 10 12"
PRESSURE RELIEF VALVE - Protects against excessive presssure. CONSULT FACTORY for control valve price list for specific options.
SIZE C THREADED CF FLANGED* SIZE C THREADED CF150# FLANGED* 150#
11/4" 11/2 " 2" 21/2 " 3" 4" 6" 8" 10" 12" $ $ $ $ 1,278 1,286 1,316 1,635
SIZE
THREADED
CF MODEL* 150#
C/CA C/CA C FLANGED C FLANGED C FLANGED C FLANGED 150# 300# 150# 300#
$ $ $ $ $ $ $ $ $ 1,514 1,541 1,750 1,890 2,561 3,754 6,141 8,486 13,819 $ $ $ $ $ $ $ $ $ 1,561 1,612 1,868 1,977 2,733 4,033 6,656 9,236 14,382
11/2 " 2" 21/2 " 3" 4" 6" 8" 10" 12"
$ 3,579 $ 3,768 $ 4,171 $ 4,223 $ 4,940 $ 6,115 $ 8,790 $ 9, 697 $ 14, 744
$ $ $ $ $ $ $
* Reduced cavitation configuration. Note: CONSULT FACTORY for larger sizes (20 - 36 CONSULT FACTORY).
* Reduced cavitation configuration. Note: CONSULT FACTORY for larger sizes (20 - 36 CONSULT FACTORY).
* Reduced cavitation configuration. Note: CONSULT FACTORY for larger sizes (20 - 36 CONSULT FACTORY).
22
www.flomatic.com
C501/CA501
Discount Code
C601/CA601
Discount Code
C601DP
Discount Code
PUMP CONTROL VALVE-Eliminates pump station pressure surges during start up and shut down. CONSULT FACTORY for control valve price list for specific options.
SIZE
3" 4" 6" 8" 10" 12
C601DP Power Chamber- Eliminates pump station pressure surges during start up and shut down. CONSULT FACTORY for control valve price list for specific options.
SIZE
3" 4" 6" 8" 10" 12"
CF FLANGED 150#
$ 3,640 $ 4,196 $ 5,236 $ 6,662 $10,832 $15,704
pressure surges during pump start up, shut down, or power failure.CONSULT FACTORY for control valve price list for specific options.
C THREADED
$ 3,364 $ 3,829 $ 4,192
SIZE
11/2 " 2" 21/2 3" 4" 6" 8" 10" 12"
CF FLANGED* 150#
$ 4,126 $ 4,267 $ 4,515 $ 5,143 $ 6,647 $ 8,858 $ 13,784
CF FLANGED 150#
C705/CF705
Discount Code
C801-2/CA801-2
Discount Code
C701/CA701
Discount Code
storage tanks, reservoirs, or basins. CONSULT FACTORY for control valve price list for specific options.
11/4" 11/2" 2" 2" "1/2 " 21/2 2 3" 3 " 4" 4 " 6" 6 " 8" 8 " 10" 12"
SOLENOID CONTROL VALVE - Remote actuation for valve position. Specify N.O. (normally open C802); N.C. (normally closed C801). CONSULT FACTORY for control valve price list for specific options. C/CA C/CA
SIZE
11/4" 11/2" 2" 21/2 " 3" 4" 6" 8" 10" 12"
$ $ $ $
CF FLANGED* 150#
C FLANGED 150#
$ 1,716 $ 1,961 $ 2,038 $ 2,076 $ 2,690 $ 3,802 $ 6,104 $ 8,527 $13,765
C FLANGED 300#
$ $ $ $ $ $ $ $ $ 1,916 2,033 2,176 2,252 2,863 4,080 6,618 9,276 14,328
PILOT OPERATED FLOAT VALVE - For level control of storage tanks, reservoirs, or basins. CONSULT FACTORY for control valve price list for specific options.
SIZE
11/4" 11/2 " 2" 21/2 " 3" 4" 6" 8" 10" 12"
C901/CA901
Discount Code
B C1001/CA1001
* Reduced cavitation configuration.
Discount Code
Note: CONSULT FACTORY for larger sizes (20 - 36 CONSULT FACTORY). * Reduced cavitation configuration.
FLOW CONTROL VALVE - Maintains a pre-set maximum flow rate regardless of changing line pressures. CONSULT FACTORY for control valve price list for specific options.
SIZE
11/2 " 2" 21/2 " 3" 4" 6" 8" 10" 12" $ 2,370 $ 2,370 $ 2,406 $ 2,652 $ 3,911 $ 5,636 $ 7,341 $ 11,663
HYDRAULIC CHECK VALVE - Closes to prevent flow revesal. Adjustable opening & closing speed controls. CONSULT FACTORY for control valve price list for specific options.
11/4 " 11/2 " 2" 21/2 " 3" 4" 6" 8" 10" 12"
CF FLANGED 150#
www.flomatic.com
SIZE
$ $ $ $
C THREADED
1,108 1,150 1,219 1,479
CF FLANGED 150#
$ 1,444 $ 1,579 $ 1,691 $ 2,628 $ 4,319 $ 6,377 $ 10,994
23
PRP
Discount Code
FC4 FC -20
Discount Code
pressure to a preset outlet pressure and maintain it irregardless to what fluctuations in flow occur. Temp Max: 180F (80C) Pressure Max: 400 PSI
152100A 152100B 152100C 152100D
PRP- 3/8 Pressure Reducing Pilot in Unleaded Bronze Enables Automatic Control Valves to reduce inlet
MINI BALL VALVE- Mini ball valves are a quater turn full ported on off isolation valves used on external control valve pilot controls.
3/8"
SIZE C THREADED LIST PRICE CF FLANGED LIST PRICE 150# 150# PART NO. LIST PRICE SIZE
149B5369 $ 8.95
NE
FLOW CONTROL- Adjustable restrictor that has free flow in the direction of the arrow on the body and operates as a needle valve in the reverse direction.
SIZE
3/8"
W!
PART NO.
FC4
PART NO.
SPRING RANGE
5-80 PSI 25-175 PSI 2-35 PSI 30-300 PSI
BPP
LIST PRICE
$ 120.00
LIST PRICE
* For stainless steel, put S before letter and after part number.
Discount Code
SOLENOID VALVE
Discount Code
Y STRAINER
Discount Code
inlet pressure. Also enables control valve to relieve pressure upon reaching a preset inlet pressure. Temp Max: 180F (80C) Pressure Max: 400 PSI
PART NO.
160100A 160100B 160100C 160100D
BPP - Back Pressure Reducing Pilot in Unleaded Bronze Enables Automatic Control Valves to sustain a preset
SOLNEIOD VALVE- For on off control used to alternatly apply pressure to and exhaust pressure from the main valve body cover. Valves are specified either valve body cove. Valves are 3 way 120V and are specified either normally open or closed.
1/4 1/4
Y STRAINER- Unleaded Bronze body, 20 mesh stainless steel strainer. Furnished with clean out plug.ction as M eM SIZE PART NO. LIST PRICE
1/4" x 3/8" 8710E
$ 12.00
SPRING RANGE
5-80 PSI 25-125 PSI 2-35 PSI 30-300 PSI
LIST PRICE
SIZE
PART NO.
8853 8862
DESCRIPTION
Open Closed
LIST PRICE
$ 280.00 $ 280.00
* For stainless steel, put S before letter and after part number.
Discount Code
CV80S6
Discount Code
NE
ACP - Accelerator Pilot in Unleaded Bronze - It is used in systems to control flow by applying an independent pressure to the diaphragm. Enables automatic control valves to rapidly vent water from control diaphragm, thus allowing quicker main valve opening.
Temp Max: 180F (80C)
SIZE
1/2" 165200
W!
CV80S6 CHECK VALVE- All 316SS body with Delrin poppet and Buna-N seal. Threaded female x female connection. Temp Max: 180 F (82 C) Pressure Max: 400 PSI
3/8 1/2
SIZE
PART NO.
5159 4029
$ 76.41 $ 92.42
LIST PRICE
PART NO.
24
www.flomatic.com
C155E-BPV
Discount Code
Discount Code
C150EHF
C150E
BACK PRESSURE VALVE- Delivers constant pre-set inlet pressure and regulate back-pressure automatically. This is accomplished with and adjustable spring loaded balancing valve factory set to automatically regulate the up-stream pressure to a factory set of 30 psi. For use with geothermal heating system, domestic well water systems, irrigation systems, pressure relief valve function.
Temp Max: 180F (80C) Pressure Max: 400 PSI Factory set at 30 PSI
PRESSURE REDUCING VALVE (PRV)- Model C150E when properly installed will regulate high upstream (inlet pressure) to a lower regulated downstream (outlet pressure) constant pressure within a range regardless ofwater flow. This is accomplished by an adjustable spring loaded balancing valve factory set to automatically regulate the downstream pressure. NSF/ANSI 61-2010 Certified by IAPMO R&T, 12 through 114 Temp Max: 180F (80C) Pressure Max: 400 PSI Factory set at 50 PSI ASSE Listed 1003, IAPMO listed Certified for City of Los Angeles Part numbers are for 15 - 75 PSI range
1/2" 3/4" 1" 11/4"* 11/4"** 11/2 " 2"
Designed for Geo-thermo systems, Artisian wells, anti-floating, pressure relief, etc.
Part numbers are for 15 - 75 PSI range
SIZE
1" 1" F x 11/4" M* 11/4"
SIZE
PART NO.
C155001E C155001ET* C155002E
PRICE
$ 199.99 $ 194.60 $ 380.09
PART NO.
C150E
$316.73 $613.07
C150ET
C150E
$ 110.00 $ 111.00 $145.00 $ 331.00 $598.00 $ 649.46 $ 765.21
C150ET
$ 97.00 $ 97.50 $133.00 $316.73 $501.51 $613.07
PART NO.
C155001E C155001ET* C155002E
PRICE
$ 199.99 $ 194.60 $ 380.09
*Note: 11/4" size is one size smaller restricted flow. Maximum 30 GPM, see model C150EHF for higher capacity. **High flow in to 70 GPM
Product Specifications
Connection: NPT (Male/Female),or Sweat (see product option chart below) Max Pressure: 400 PSI (27 bar) Max Temperature: 1800F (800C) Pressure Regulating Setting: Factory set at 50 psi Standard Spring Adjustment range see part number chart
Description
Standard Model Unleaded Valve Body Unleaded Valve Body
Inlet
End-Connections
Outlet
w/Female NPT
www.flomatic.com
25
Discount Code
Discount Code
Discount Code
DIRECT ACTING PUMP CONTROL VALVE- Reduces rapid pump cycling and maintains a pre-set operating pressure for wells. Threaded female x female connection. Features a low lead alloy body & composite bell housing, Nylon reinforced Buna-N diaphragm. Supplied with two FNPT tailpiece and union nuts.
Temp Max: 180F (80C)
3/4" 1" 1 1/4"* 11/2 " 2" 3/4" 1" 1 1/4"* 11/2 " 2"
DIRECT ACTING PUMP CONTROL VALVE- Reduces rapid pump cycling and maintains a pre-set operating pressure for wells. Threaded female I.D.x male O.D. on inlet and outlet connections. Features a low lead alloy body & composite bell housing, Nylon reinforced Buna-N diaphragm.
Temp Max: 180F (80C)
1"
CONSTANT PRESSURE PUMP CONTROL- Reduces rapid pump cycle with field adjustable by-pass and maintains a pre-set operating downstream pressure. Flow 1-5200 GPM depending on size. For use with domestic water well, municipal water systems, industrial water system, irrigation and agriculture.
Temp Max: 180F (80C)
SIZE
11/4" 11/2 " 2" 21/2 " 3" 4" 6" 8"
SIZE
C152000E C152001E C152002E C152003E C152003E C152004E C152100E C152101E C152102E C152103E C152104E
PART NO.
LIST PRICE
SIZE
C152001ET C152101ET
PART NO.
LIST PRICE
1"
SIZE
PART NO.
SPRING RANGE
15 - 150 PSI
$225.65
LIST PRICE
SIZE
PART NO.
$177.65 15 - 150 PSI 15 - 150 PSI 15 - 150 PSI 15 - 150 PSI 15 - 150 PSI $389.56
SPRING RANGE
LIST PRICE
LIST PRICE
$ $ $ $ $ $ $ 1,454 1,664 1,994 2,101 2,749 4,200 7,282
*Note: 11/4 size is one size smaller restricted flow. Maximum 30 GPM. See model C152EHF below for higher capacity.
Discount Code
Model C152EHF reduces rapid pump cycle with field adjustable bypass and maintains a pre-set operating downstream pressure for wells. Threaded female x female NPT connection with hex end OD. Features a low lead alloy body and cover. Nylon reinforced Buna-N diaphragm. Ideal for flows up to 70 GPM. Temp Max: 180F (80C)
SIZE PART NO.
operating pressure for wells. Threaded female x female union end or female I.D. x male O.D. on inlet and outlet connections. Features a unleaded alloy body & composite bell housing, Nylon reinforced Buna-N diaphragm. Supplied with two FNPT tailpiece and union nuts. With two (2) 14 tappings for gage and pressure switch. One (1) 34 tapping for water tank. Temp Max: 180F (80C) Pressure Max 400 PSI Factory set at 50 PSI
SPRING RANGE
15-75 PSI 15-150 PSI
DIRECT ACTING PUMP CONTROL VALVE WITH TAPPINGS- Reduces rapid pump cycling and maintains a pre-set
No screen
Non-closing seat
No drilled holes
Slotted seat
SIZE
1" 1"
CB152001E CB152101E
PART NO.
LIST PRICE
$ 280.00 $ 280.00
1 1/4" 1 1/4"
C152002EHF C152102EHF
LIST PRICE
NPT ID x NPT OD
SIZE
1" 1" CB152001ET CB152101ET
PART NO.
SPRING RANGE
$ 245.00 $ 245.00
LIST PRICE
SCREEN
DRILLED HOLE
26
www.flomatic.com
Discount Code
Discount Code
Discount Code
PUMP CONTROL VALVE - Reduces rapid pump cycle with field adjustable by-pass and maintains a pre-set operating downstream pressure. Ideal for irrigation, water wells and agriculture applications. Optional check feature.
Temp Max: 180F (80C)
SIZE
11/2" 2"
NE
PUMP CONTROL GROOVED CONNECTION
Reduces rapid pump cycle with field adjustable by-pass and maintains a pre-set operating downstream pressure.Ideal for irrigation, water wells and agriculture. Temp Max: 180F (80C)
SIZE
2" CIN1020DG
W!
PUMP CONTROL VALVE- Reduces rapid pump cycle with field adjustable by-pass and maintains a pre-set operating downstream pressure for wells. CONSULT FACTORY or control valve price list for specific options.
Temp Max: 180F (80C)
11/4 " 11/2 " 2" 21/2 " 3" 4" 6" 8" 10" 12" CNA1010B CNA1010C CNA1010D CNA1010E CNA1010F $ $ $ $ $ 1,224 1,224 1,481 1,593 2,044
LIST PRICE
LIST PRICE
PART # PART # SIZE THREADED FEMALE LIST PRICE FLANGED ANSI 150#
CNA1011C CNA1011D CNA1011E CNA1011F CNA1011G CNA1011J CNA1011K CNA1011L CNA1011M
SIZE
3" 4" 6" 8"
$ $ $ $
LIST PRICE
UNLEADED VALVES
Max. pressure differential 125 PSI. Consult factory for higher pressure differential.
Discount Code
BOOSTER-IT C154
NPT VALVES RATED TO 250 PSI 125# FLANGED VALVES RATED TO 250 PSI
Discount Code
800.833.2040
COMPACT PUMP PRESSURE- Reduces rapid pump cycling and maintains a pre-set operating pressure for wells. Threaded female I.D.x male O.D. on inlet and outlet connections. Features a unleaded alloy body & cover, Nylon reinforced Buna-N diaphragm. 1 NTP Female connection x 11/4" male NPT.
Temp Max: 180F (80C) Max Flow 25 GPM
1 1 *
systems, and pump irrigation pumping systems. Valve body is cast from an unleaded bronze alloy with two 1/4" tapped holes on tank side for pressure switch and gauge. Temp Max: 180F (80C) Pressure Max: 175 PSI
3/4" 1" 11/4" 11/2 " 2"
BOOSTER-IT WATER SYSTEM PUMP CONTROL VALVE- Designed for well water pumping systems, booster
SIZE
SIZE
C3100E C3100EB*
PART #
LIST PRICE
PART NO.
WGT.
.7 1.3 1.6 2.5 3.1
CASE QTY.
100 49 36 25 16
LIST PRICE
Note: BOOSTER-IT requires a safety pressure release valve, not available from Flomatic Valves.
UNLEADED VALVES
www.flomatic.com
27
MINIAIR
Discount Code
MINIAIR- Cast iron body-stainless steel trim. Threaded female x female connections. NITRILE (Buna-N) seat. Small orifice. Consult bulletin # 280 for details. Vents under line pressure. Temp Max: 150F (65C) Inlet Pressure Max: 200 PSI
3/8" 1/2" 3/4" 1" 2"
INLET
OUTLET
PART NO.
6500 6501 6502 6503 6504
WGT.
6 7 7 27 45
$ $ $ $ $
LIST PRICE
COMBOAIR
CONSULT FACTORY for full line of sizes available. Viton Seal standard.
Discount Code
MAXIAIR
Discount Code
WELLAIR
Discount Code
COMBOAIR- Cast iron body-stainless steel trim. Combines features of Miniair and Maxiair in one housing. Small orifice is 3/32 in the 1 valve, 3/16 in the 2 and 3 sizes.
Temp Max: 150F (65C) Inlet Pressure Max: 1 150 PSI, 2-3 250 PSI
INLET
1" 2" 3" 4" 1" 2" 3" 4"
OUTLET
PART NO.
6540 6541 6542 6543
WGT.
30 75 115 163
LIST PRICE
MAXIAIR - Cast iron body-stainless steel trim. Threaded female x female connections. NITRILE (Buna-N) seat. Large orifice equals inlet size. Vents on filling- eliminates vacuum under pressure loss. Temp Max: 150F (65C) Inlet Pressure Max: 200 PSI
WELLAIR - Similar to Maxiair but features discharge throttling valve. Ideal for deep well applications.
Discount Code
INLET
INLET
OUTLET
PART NO.
6520 6521 6522 6523 6524 6525
WGT.
7 16 42 92 154 174
LIST PRICE
OUTLET
WGT.
12 22 55 100
LIST PRICE
6BSE BUG SCREEN - Picture shown with valve not included. Unleaded bronze body with threaded female connection. Stainless steel strainer with unleaded bronze. Stainless steel or plastic caps, with nipple for installation into air valve vent.
1/2" 1" 2"* 3"
SIZE
PART NO.
WGT.
0.2 1.2 2.8 7.7
LIST PRICE
28
www.flomatic.com
SEWAIR-MINI
Discount Code
SEWAIR-MAXI
Discount Code
SEWAIR-MINI- Cast iron body-stainless steel trim. Threaded female x female connections. NITRILE (Buna-N) seat. 1/4 orificefor waste water application. Vents under line pressure. Temp Max: 150F (65C) Inlet Pressure Max: 175 PSI
INLET
2" 3" 1/2" 1/2"
SEWAIR-MAXI- Cast iron body-stainless steel trim. Threaded female x female connections. NITRILE (Buna-N) seat. Large orificeequals inlet size. Eliminates vacuum in waste water pipeline. Temp Max: 150F (65C) Inlet Pressure Max: 175 PSI
INLET
2" 2" 3" 4" 6" 1" 2" 3" 4" 6"
Automatic Improves Flow & Pump Efficiency Eliminates Restrictive Air or Gas Pockets Saves Energy Protects Against Vacuum Long Body Protects Orifice From Sewage
FEATURES/ BENEFITS
OUTLET
PART NO.
6600 6601
WGT.
50 70
$ $
LIST PRICE
587.00 930.30
OUTLET
PART NO.
6620 6621 6622 6623 6622
WGT.
50 82 85 120 210
$ $ $ $ $
LIST PRICE
SEWAIR-DUAL
Discount Code
SEWAIR-COMBO
Discount Code
BACKFLUSH
Discount Code
SEWAIR-DUAL- Cast iron body, stainless steel trim. NITRILE (Buna-N) seat. Provides protection of both small and large orifices. Two body construction. Temp Max: 150F (65C) Inlet Pressure Max: 175 PSI
INLET
2" 2" 1" 2"
SEWAIR-COMBO- Cast iron body, stainless steel trim. NITRILE (Buna-N) seat. Provides same protection as Sewair-Dual, but combines into one body. Temp Max: 150F (65C) Pressure Max: 175 PSI
INLET
2" 2" 3" 1" 2" 3"
BACKFLUSH- Fabric reinforced NITRILE (Buna-N) hose with bronze shut off valves and galvanized quick disconnects. Designed for pressure backflush Sewair models.
INLET
2" 3" BF2 BF3
PART NO.
WGT.
12 19
OUTLET
PART NO.
6640 6641
WGT.
120 150
$ 2,725.00 $ 3,100.00
LIST PRICE
OUTLET
PART NO.
6650 6651 6652
WGT.
80 110 145
LIST PRICE
$ $
LIST PRICE
385.35 605.85
www.flomatic.com
29
RPZE II
Discount Code
RPZE
Discount Code
RPZESA
Discount Code
angle elbows. Body: Unleaded Bronze Discs: Silicone Pressure: 175 PSI
SIZE
SIZE
PART NO.
B9200E B9201E B9202E B9203E B9204E
WGT.
9 10 13 28 32
LIST PRICE
$ 529.42 $ 575.77 $ 982.62 $ 1,066.05 $ 1,210.25
PART NO.
B9200ESA B9201ESA B9202ESA B9203ESA B9204ESA
LIST PRICE
$ 662.29 $ 719.97 $ 1,228.79 $ 1,332.82 $ 1,535.73
800.833.2040
RPZSS II
Discount Code
11 14 20 34 41 9 10 14 31 34
$ 616.97 $ 665.38 $ 1,102.10 $ 1,202.01 $ 1,388.44 573.71 $ $ 640.66 $ 1,057.81 $ 1,153.60 $ 1,331.79
RPZ
Discount Code
NE
W!
SDC
REDUCED PRESSURE ZONE ASSEMBLY
Body: 316 Stainless Steel Discs: Silicone Pressure: 175 PSI
PART NO.
B9399SS B9300SS
Discount Code
BACKFLOW PREVENTERS
SIZE
21/2" 3" 4" 6" 8" 10"
PART NO.
B9205 B9206 B9207 B9209 B92010 B92011
LIST PRICE
$ 3,135.32 $ 3,268.19 $ 4,301.28 $ 6,336.56 $ 11,182.71 $ 17,844.75 $ 3,558.65 $ 3,765.68 $ 4,704.01 $ 7,135.84 $12,975.94 $18,369.02
Y STRAINERS
" "
Discount Code
stainless steel strainer. Furnished with clean out plug. Pressure Max: 200 PSI WOG 125 PSI STEAM
SIZE Threaded
" " 3/" 4 1" 11/4" 11/2 " 2" 21/2 "* 3"* 4"* 6"* 8"*
1/ 2 3/ 8
1 /2")
SINGLE DETECTOR CHECK- Designed to protect the potable water supplies from potential backflow. Optional metered by-pass to detect any unauthorized water use and leaks. FM approved for 4'' & 6'' sizes, 3'' & 8'' sizes now available. No gate valve included except for OS & Y units. Body: Ductile Iron Springs: Stainless Steel Discs: Silicone Temp: 140F (60C) Pressure: 175 PSI
SIZE
4" 4" 4" 4" 4" 6" 6" 6" 6" 6" B9017 B9017G B9017D B9017DG B9007OSY B9019 B9019G B9019D B9019DG B9009OSY
UNLEADED VALVES
LIST PRICE
903.00 903.00 1,467.90 1,467.90 2,222.85 1,276.80 1,276.80 1,904.70 1,904.70 3,124.80
PART NO.
8711E 8712E 8713E 8714E 87142E 87143E 87144E 87145* 87146* 87147* 87148* 87149*
WGT.
.5 .3 2 4 5 6 9 15 25 95 185 299
LIST PRICE
$ 32.00 $ 35.00 $ 55.00 $ 63.00 $ 112.00 $ 145.00 $ 250.00 $ 269.00 $ 340.00 $ 610.00 $ 987.00 $ 1,840.00
PART NO.
Flanged Grooved Connection Flanged w/metered bypass Grooved w/metered bypass Flanged w/OSY GateValves Flanged Grooved Connection Flanged w/metered bypass Grooved w/metered bypass Flanged w/OSY GateValves
DESCRIPTION
$ $ $ $ $ $ $ $ $ $
30
www.flomatic.com
DCVE
Discount Code
DCV
Discount Code
C PVB
Discount Code
BACKFLOW PREVENTERS
Testing is simplified with vertical test cocks and top entry. SIZE PART NO.
B9100E B9101E B9103E B9104E
Testing is simplified with vertical test cocks and top entry. SIZE
21/2" 3" 4" 6" 8" 10" 21/2" 3" 4" 6" 8" 10"
WGT.
7 8 24 28 $ $ $ $ $ $ $ $ $ $ $ $
LIST PRICE
263.68 288.40 638.60 743.66 361.53 443.93 826.06 973.35 312.09 368.74 808.55 918.76
PART NO.
B9105 B9106 B9107 B9109 B91010 B91011
LIST PRICE
$ 2,520.41 $ 2,625.47 $ 3,351.62 $ 5,808.17 $10,022.93 $ 15,457.21 $ 3,061.16 $ 3,276.43 $ 3,675.04 $ 6,230.47 $ 11,062.20 $ 16,319.32 " 1" 11/4 " 11/2 " 2"
3/ 4 3/ " 4 1"
SIZE
AVB
9 12 30 37
PART NO.
WGT.
3 4 18 20 24 4 5
$ $ $ $ $ $ $
LIST PRICE
8 9 27 30
Discount Code
CB20
Discount Code
HB8
Discount Code
800.833.2040
ATMOSPHERIC VACUUM BREAKER- Designed to prevent back-siphonage. (See our model PVB above for continuous pressure conditions.)
Temp Max: 180F (80C) Complies with ASSE 1001
" 3/ " 4 1 11/4 11/2 2
1/ 2
SIZE
PART NO.
LIST PRICE
For use on vending machine water supply lines to prevent reverse flow of potentially contaminated water or carbonated water. Consists of high quality stainless steel and two independently operating check valves with an integral atmospheric vent located between the checks. Temp Max: 140F (60C) Pressure Max: 150 PSI Complies with ASSE 1022
SIZE
3/ 8
Designed to prevent back-siphonage or backflow of water, with vandal resistant features. Temp Max: 180F (80C) Complies with ASSE 1011
SIZE
3/ 4
"
B800
PART NO.
LIST PRICE
"
B7497
PART NO.
WGT.
.28
LIST PRICE
229.05
8080SS
Discount Code
8080E
Discount Code
8200
Discount Code
NE
W!
B8080SS B8081SS
PART NO.
LIST PRICE
127.00 132.23
PART NO.
LIST PRICE
DUAL CHECK with ATMOSPHERIC VENT Continuous pressure backflow preventer with an intermediate atmospheric vent, with double union ends. Complies with ASSE 1012 Temp Max: 210F (98C) Pressure Max: 175 PSI
SIZE
1/ 2
Add FC to end of part number for copper sweat connection. Note: Consult factory for additional connection configurations. 31
PART NO.
WGT.
1.3 1.3 1.3 1.3
$ $ $ $
LIST PRICE
*With copper sweat connections Note: Consult factory for additional connection configurations.
Discount Code
Discount Code
Discount Code
AIR GAP ADAPTER- The air gap adapter is designed to funnel minor relief valve discharges, due to line pressure fluctuations and/or minor check valve fouling into a drainage system. Cast iron body and stainless steel bolts.
" 3/4"* " 3/4" 3/ "2"* 4 3/ "2" 4 21/2"3" 4 10
1/ 2 1/ 2
valve, full port solid ball standard. Pressure Max: 600 PSI WOG
SIZE Threaded
" " 1" 11/4 " 11/2" 2"
3/ 4 1/ 2 3/ " 4 1" 11/4 " 11/2" 2"
BALL VALVE- Unleaded Bronze body ball valve, full port solid ball standard. Pressure Max: 600 PSI WOG
SIZE PART NO.
5308E 5300E 5301E 5302E 5303E 5304E 5300UE 5301UE 5302UE 5303UE 5304UE
PART NO.
5318E 5310E 5311E 5312E 5313E 5314E 5310UE 5311UE 5312UE 5313UE 5314UE
WGT.
.4 .7 1.3 3 3 5.2 .7 1.3 3 3 5.2
CASE QTY.
1 84 48 20 20 12 84 48 20 20 12 $ $ $ $ $ $ $ $ $ $ $
LIST PRICE
31.50 37.90 55.71 82.26 116.32 187.83
WGT.
.4 .7 1.3 3 3 5.2 .7 1.3 3 3 5.2
CASE QTY.
1 84 48 20 20 12 84 48 20 20 12 $ $ $ $ $ $ $ $ $ $ $
LIST PRICE
28.72 33.36 53.42 82.45 122.93 170.70 59.68 88.75 139.71 210.41 293.79
SIZE
800.833.2040
* Polycarbonate
PART NO.
WGT.
$ $ $ $ $ $
LIST PRICE
Threaded
" " 1" 11/4 " 11/2" 2"
3/ 4 1/ 2 3/ " 4 1" 11/4 " 11/2" 2"
Discount Code
Union
TEST COCKS
Union
Discount Code
TEST KIT #1- This backflow prevention assembly test kit is designed for field testing of all brands of reduced pressure principle, double check and pressure vacuum breakers. Test kit with five control valves Accuracy: +/- .2 P.S.I.D. (descending) Dial size: 4 1/2" round, 0 - 15 P.S.I.D. (descending) Maximum working pressure: 200 PSI
B9907
SIZE
BACKFLOW PREVENTERS
PART NO.
WGT.
8
$2,215.53
LIST PRICE
PART NO.
$ $ $ $
LIST PRICE
15.70 15.70 15.70 15.70
UNLEADED VALVES
SIZE
3/ 4 &
1 DCVE
RPZE II
3/ 4 &
1 RPZE
89848P0 $43.56
89878P9 $41.21
11/4 RPZE
1 1/2
89849P0 $47.50
89879P9 $42.40
RUBBER KIT
B92RK00 $31.35
B93RK99 $24.38
B92RK02 $39.09 B93RK03 $43.07 B92RK03 $46.15 B92RK05 $99.03 B92RK07 $229.82
VALVE Y KIT
SIZE
RELIEF COMPLETE
RPZE II
4 / 3
89855P10 89849P10 B91RK10 8 89878P9 89879P9 B93RK99 $1,703.10 $2,002.35 $788.70 DCV
89855P9 89849P9 B91RK09 6 ST ND 1 CHECK CHECK 2 ST ND $453.14 $1,191.75 $1,203.30 DCV CHECK CHECK 2ASSEMBLY RUBBER KIT 1 ASSEMBLY
REPAIR KITS
RUBBER KIT
$30.00
$29.72
$16.80
" & 1 1/ 89855P0 89850P5 89849P0 89848P5 B91RK0089849P5 2 2 & 3 DCVE $32.16 $334.25 $35.99 $292.58 $10.64 $342.85 RPZ 89855P3 89850P7 89849P3 89848P7 B91RK0389849P7 4 $77.57 $741.34 $72.45 $867.95 $23.92 $765.38 RPZ 89855P5 89850P9 89849P5 89848P9 B91RK0589849P9 6 $147.14 $247.45 $89.57$1,203.30 $801.25 $1,329.30 RPZ
ST ND CHECK 89850P3 2ND CHECK 89848P3 1 ST CHECK 2ASSEMBLY RUBBER $157.15 $109.74
PZE &
EF COMPLETE ASSEMBLY
1 2 / ST 3 ND 1 CHECK 89850P5 CHECK 2 IEF COMPLETE 2 " & ST ND CHECK $245.93 CHECK 1 2ASSEMBLY RPZ ASSEMBLY
89855P7 89850P10 89849P789848P10 B91RK07 89849P10 8 $562.80 $1,262.10 $541.57 $114.75 $2,188.20 $2,002.35 RPZ 89849P9 $797.34 89849P10 B91RK09 $312.18
6 89855P9 89849P3 B92RK03 $72.45 $31.79 DCV $820.97 MODEL DCVE REPAIR KITS B92RK05 ST 1 CHECK ST CHECK 1 $68.23 ASSEMBLY 8 ND 32 2 CHECK 89855P10
SIZE $247.45
B91RK10 www.flomatic.com
1 15FL
Discount Code
1 15MJ
Discount Code
GATE VALVES
FLANGED- Resilient wedge gate valves which meet revision of AWWA C515 standard, with stainless steel stem. ANSI B16.1, class 125 Temp Max: 140F (60C) Pressure Max: 250 PSI
Tapped & plugged
21/2" 3" 4" 6" 8" 10" 12" 14" 16"
PUSH-ON- Resilient wedge gate valves which meet revision of AWWA C515 standard, with stainless steel stem. ANSI B16.1, class 125
Temp Max: 140F (60C) Pressure Max: 250 PSI
Tapped & plugged
2" 21/2" 3" 4" 6" 8" 10" 12"
MECHANICAL JOINT- Resilient wedge gate valves which meet revision of AWWA C515 standard, with stainless steel stem. ANSI B16.1, class 125
Temp Max: 140F (60C) Pressure Max: 250 PSI
Tapped & plugged
3" 4" 6" 8" 10" 12"
SIZE
PART NO.
WGT.
$ $ $ $ $ $ $ $ $
LIST PRICE
SIZE
109OSY
Discount Code
PART NO.
WGT.
LIST PRICE
SIZE
PART NO.
WGT.
LIST PRICE
800.833.2040
Standard 2 operating nut, for hand wheel on all C515 Gate Valves. Add HW to the end of the part number and add 15 % to list.
109G
Discount Code
OUTSIDE SCREW & YOKE- Resilient wedge gate valves which meet revision of AWWA C509 standard with bronze stem and are UL/FM listed. ANSI B16.1, class 125 Temp Max: 140F (60C) Pressure Max: 200 PSI
Tapped & plugged
2 " 3" 4" 6" 8" 10"
1/ 2
FLANGED- Resilient wedge gate valves which meet revision of AWWA C509 standard with bronze stem. ANSI B16.1, class 125 Temp Max: 140F (60C) Pressure Max: 200 PSI
Tapped & plugged SIZE PART NO. WGT. LIST PRICE
GROOVED GATE VALVE- Resilient wedge gate valves with Grooved x Grooved connections, bronze stem, grooved ends conforms to ANSI/AWWA C606 and flanged ends conform to ANSI/ASME B16, class 125, these valves also conform to ANSI/AWWA C550.
Temp Max: 140F (60C) Pressure Max: 250 PSI
21/2" 3" 4" 6"
SIZE
PART NO.
WGT.
$ $ $ $ $ $
LIST PRICE
$ $ $ $ $ $ $
SIZE
109FG
PART NO.
WGT.
43 57 63 92
$ $ $ $
LIST PRICE
Discount Code
All gate valves standard open left. Consult factory for right hand opening.
SIZE
www.flomatic.com
PART NO.
WGT.
47 52 70 106
$ $ $ $
LIST PRICE
33
STATE
ALABAMA ALASKA ARIZONA ARKANSAS CALIFORNIA SOUTHERN CALIFORNIA COLORADO CONNECTICUT DELAWARE D.C. FLORIDA GEORGIA HAWAII IDAHO ILLINOIS INDIANA -NORTH -SOUTH IOWA KANSAS KENTUCKY LOUISIANA MAINE MARYLAND MASSACHUSETTS MICHIGAN UPPER PENINSULA MINNESOTA MISSISSIPPI MISSOURI MONTANA NEBRASKA NEVADA NEW HAMPSHIRE NEW JERSEY NEW MEXICO NEW YORK -UPSTATE -NYC NORTH CAROLINA NORTH DAKOTA OHIO OKLAHOMA OREGON PENNSYLVANIA -EAST -WEST RHODE ISLAND SOUTH CAROLINA SOUTH DAKOTA TENNESSEE TEXAS UTAH VERMONT VIRGINIA WASHINGTON WEST VIRGINIA WISCONSIN WYOMING -EAST -WEST
MUNICIPAL
H2O Reps
770-295-9736 FAX 770-982-3719 503-698-1025 FAX 503-698-2351 623-322-7902 FAX 623-322-7903 816-588-8700 FAX 816-746-8264 559-779-4651 FAX 866-590-6068 562-403-3848 FAX 562-303-3858 303-371-1800 FAX 303-371-1808 207-998-8100 FAX 207-998-2484 800-878-8181 FAX 888-667-9201 800-878-8181 FAX 888-667-9201 407-291-2341 FAX 407-291-2345 770-295-9736 FAX 770-982-3719 808-262-7773 FAX 808-262-7768 503-698-1025 FAX 503-698-2351 800-833-2040 FAX 518-761-9798 618-667-7890 FAX 618-667-7976 317-219-4333 FAX 317-219-3370 816-746-6669 FAX 816-746-8264 816-746-6669 FAX 816-746-8264 317-849-5757 FAX 317-845-7967 225-892-8444 FAX 888-329-2431 207-998-8100 FAX 207-998-2484 800-878-8181 FAX 888-667-9201 207-998-8100 FAX 207-998-2484 800-833-2040 FAX 518-761-9798 800-833-2040 FAX 518-761-9798 800-833-2040 FAX 518-761-9798 225-892-8444 FAX 888-329-2431 618-667-7890 FAX 618-667-7976 816-588-8700 FAX 816-746-8264 503-698-1025 FAX 503-698-2351 816-588-8700 FAX 816-746-8264 623-322-7902 FAX 623-322-7903 207-998-8100 FAX 207-998-2484 800-878-8181 FAX 888-667-9201 303-371-1800 FAX 303-371-1808 585-655-2339 FAX 585-655-2558 516-575-6800 FAX 516-349-8411 704-504-3111 FAX 704-504-3499 800-833-2040 FAX 518-761-9798 814-847-2386 FAX 814-847-2393 816-588-8700 FAX 816-746-8264 503-698-1025 FAX 503-698-2351 800-878-8181 FAX 888-667-9201 814-847-2386 FAX 814-847-2393 207-998-8100 FAX 207-998-2484 704-504-3111 FAX 704-504-3499 800-833-2040 FAX 518-761-9798 704-504-3111 FAX 704-504-3499 817-481-8774 801-455-3369 FAX 801-606-2853 207-998-8100 FAX 207-998-2484 804-739-9894 FAX 804-739-6313 503-698-1025 FAX 503-698-2351 814-847-2386 FAX 814-847-2393 800-833-2040 FAX 518-761-9798 303-371-1800 FAX 303-371-1808
503-698-1025 FAX 503-698-2351 972-790-0160 FAX 972-790-9210 559-779-4651 FAX 866-590-6068 800-833-2040 FAX 518-761-9798 303-371-1800 FAX 303-371-1808 207-998-8100 FAX 207-998-2484 800-878-8181 FAX 888-667-9201 800-878-8181 FAX 888-667-9201 800-282-8582 FAX 813-657-8089 770-295-9736 FAX 770-982-3719 808-262-7773 FAX 808-262-7768 503-698-1025 FAX 503-698-2351 651-686-0181 FAX 651-686-0803 651-686-0181 FAX 651-686-0803 317-849-5757 FAX 317-845-7967 402-462-5889 FAX 402-462-5969 402-462-5889 FAX 402-462-5969 317-849-5757 FAX 317-845-7967 225-892-8444 FAX 888-329-2431 207-998-8100 FAX 207-998-2484 800-878-8181 FAX 888-667-9201 207-998-8100 FAX 207-998-2484 269-342-0090 FAX 269-385-2999 651-686-0181 FAX 651-686-0803 651-686-0181 FAX 651-686-0803 225-892-8444 FAX 888-329-2431 800-833-2040 FAX 518-761-9798 402-462-5889 FAX 402-462-5969 503-698-1025 FAX 503-698-2351 402-462-5889 FAX 402-462-5969 623-322-7902 FAX 623-322-7903 207-998-8100 FAX 207-998-2484 800-878-8181 FAX 888-667-9201 303-371-1800 FAX 303-371-1808 585-655-2339 FAX 585-655-2558 800-833-2040 FAX 518-761-9798 704-504-3111 FAX 704-504-3499 651-686-0181 FAX 651-686-0803 814-847-2386 FAX 814-847-2393 972-790-0160 FAX 972-790-9210 503-698-1025 FAX 503-698-2351 800-878-8181 FAX 888-667-9201 814-847-2386 FAX 814-847-2393 207-998-8100 FAX 207-998-2484 704-504-3111 FAX 704-504-3499 651-686-0181 FAX 651-686-0803 704-504-3111 FAX 704-504-3499 972-790-0160 FAX 972-790-9210 801-455-3369 FAX 801-606-2853 207-998-8100 FAX 207-998-2484 804-739-9894 FAX 804-739-6313 503-698-1025 FAX 503-698-2351 814-847-2386 FAX 814-847-2393 FAX 651-686-0181 FAX 651-686-0803 303-371-1800 FAX 303-371-1808
Pacific NW Sales Desert Pacific Mktg Mc Intire Management Desert Pacific Mktg OConnor Sales Maples Sales Harmon & Co NH Yates NH Yates L.J. Ruffin H2O Reps Hawaii Eng. Ser. Pacific NW Sales Flomatic Flo-Systems (South) Watermark Engineered McIntire Management McIntire Management Aspinall Assoc AH Deveney Harmon & Co NH Yates Harmon & Co Flomatic Flomatic Flomatic AH Deveney Flo-Systems Mc Intire Management Pacific NW Sales Mc Intire Management Desert Pacific Harmon & Co NH Yates Maple Sales Group One Continuous Sales Preferred Sources Flomatic Wynn Enterprises Mc Intire Management Pacific NW Sales NH Yates Wynn Enterprises Harmon & Co Preferred Sources Flomatic Preferred Sources TLP Solutions Intermountain Landscape Harmon & Co CADCO Pacific NW Sales Wynn Enterprises Flomatic Maples Sales
34
www.flomatic.com
8
1. ORDER DESK 2. TECH SUPPORT
CONDITIONS OF SALE
3. SALES & MARKETING 518-761-9797 Ext. 3 4. FAX ORDERS 800-314-3155 518-761-9798 5. PHONE 6. WEB SITE 7. E-MAIL ORDERS 8. U.S. Mail 518-761-9797 www.flomatic.com flomatic@flomatic.com 15 Pruyns Island Drive Glens Falls, NY 12801-4424 Flomatic Conditions of Sale TERMS OF SALE
If you are out of the country or cant get through, try this line. This page will help you get the latest information on Flomatic. This is a quick and easy way to send us a message and communicate with us. Put it in an envelope and lick a stamp, its that easy.
PRICE Prices at date of shipment will apply. Prices are subject to change without notice. ACCEPTANCE Orders are accepted subject to approval of credit. Delivery is subject to strikes, accidents, or other causes beyond our control. ERRORS, SHORTAGES, ETC. All claims for errors, shortages, etc. must be made within 10 days of delivery. CANCELLATIONS OF ORDERS Orders for standard catalog products may be cancelled only if notice is received prior to the date of shipment. RETURNS Merchandise in new and saleable condition may be returned within one year after purchase on a freight prepaid basis for credit upon return authorization approval number, subject to inspection and acceptance at our plant. A 25% restocking charge and original freight allowance, if any, will be deducted from the credit. Special order products are nonreturnable, or at manufacturers option. MINIMUM NET ORDER TERMS FREIGHT $75.00 1% ten days, net 30 F.O.B Factory
return authorization approval number, any ENVIRO-CHECK OR ENVIRO FOOT VALVE covered by this warranty that is found to be defective within five years from the time of sale. This warranty will be void if the product has been modified in any way by the purchaser, or is subjected to unreasonable use. These limited warranties extend to the original purchase from Flomatic only; they do not extend to any other purchaser or transferee. Flomatic makes no warranties, expressed or implied, with respect to its valves, other than the expressed limited warranties described herein. The implied warranties of merchantability and fitness for a particular purpose are hereby disclaimed by Flomatic . There are no warranties that extend beyond the description on the face hereof. WARNING-NOT DESIGNED, INTENDED OR PERMITTED IN NUCLEAR FACILITY APPLICATIONS. FLOMATIC VALVES ARE NOT DESIGNED OR ENGINEERED FOR USE IN ANY NUCLEAR FACILITY OR IN CONJUNCTION WITH ANY NUCLEAR FACILITY OR SUPPORT FACILITY. USE OF ANY OF FLOMATICS PRODUCTS IN ANY SUCH APPLICATION IS A MISUSE OF THESE PRODUCTS AND VOIDS ALL WARRANTIES CONTAINED HEREIN, EXPRESSED AND IMPLIED, OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE.
EXCLUSION OF WARRANTIES
WARRANTIES
LIMITED ONE-YEAR WARRANTY (Complete Product Line) Flomatic Corporation warrants that its products are free from defects in materials and workmanship. Flomatic will replace any valve covered by this warranty that is found to be defective within one year, unless otherwise stated below, from the time of sale. This warranty will be void if the product has been modified in any way by the purchaser, or is subjected to unreasonable use. LIMITED THREE-YEAR WARRANTY (Backflow Valves) Flomatic Corporation warrants that its BACKFLOW PREVENTERS are free from defects in materials and workmanship. Flomatic will replace or repair any BACKFLOW PREVENTER: , covered by this warranty that is found to be defective within three years from time of sale. This warranty will be void if the product has been modified in any way by the purchaser, or is subjected to unreasonable use. LIMITED 5-YEAR WARRANTY (Enviro-Check and Enviro Foot Valves) Flomatic warrants that its ENVIRO-CHECK AND FOOT VALVES, in all sizes up to 4, are free from defects in materials and workmanship. Flomatic will replace, upon
800.833.2040
In no event shall Flomatic be liable for incidental or consequential damages, including but without limitation, damages of personal injuries resulting from the negligence of Flomatic, which may arise from the manufacture, sale, purchase and /or use of Flomatic valves. It being intended that purchasers exclusive remedy is limited to replacement of defective products. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitation on how long an implied warranty lasts, so that the above limitations may not apply to you. Contact your distributor or Flomatic at address shown if you have any questions about the coverage of this warranty or service under this warranty. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
NOTE: Flomatic reserves the right the change and/or alter valve products without prior notice. Consult factory for valve specifications.
www.flomatic.com
Flomatic can accept no responsibility for possible errors in catalogues, brochures and other printed material. Flomatic reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies.
Distribution By:
15 Pruyns Island Drive Glens Falls, N.Y. 12801-4424 800-833-2040 518-761-9797 Fax 518-761-9798 www.flomatic.com e-mail: flomatic@flomatic.com
This book is covered under patent numbers 6,024,121/6,581,633/5,176,171/4,971,093/7,128,088 Ward valve patent #4,757,974 and #4,849,041
#YPRICE12 12M