Copyright 2009 MSC.Software Corporation PW-1 ● Workshop Objectives ● Learn the typical workflow of a finite element analysis using Patran and MD Nastran. ● Perform a start to finish finite element analysis of a solid model.
NAS120, Pre-work, August 2009
Copyright 2009 MSC.Software Corporation PW-2 ● Problem Description ● A landing gear strut has been designed for a new fighter jet. Determine if the landing gear strut has been designed properly to withstand the landing load. ● E = 30 x 106 psi ● =0.3 ● Landing Load = 7,080 lb
NAS120, Pre-work, August 2009
Copyright 2009 MSC.Software Corporation PW-3 ● Suggested Exercise Steps 1. Create a new database and name it strut.db 2. Import the strut geometry strut.xmt 3. Mesh the strut to create solid elements with global edge length = 0.5 4. Fix the cylindrical hole at the bottom of the strut 5. Apply a total load of 7080 lb in the negative Y direction to the circular surface at the top of the strut 6. Create an isotropic material with elastic modulus = 30e6 and Poisson's ratio = 0.3 7. Create a physical property, applying your isotropic material to the entire solid
NAS120, Pre-work, August 2009
Copyright 2009 MSC.Software Corporation PW-4 ● Suggested Exercise Steps 8. Run a linear static analysis 9. Attach the results 10. Plot the Von Mises stress on the deformed shape