Gas Extinguishing Warning Indicatior

C-9318
Technical Specifications Operating voltage: 24Vdc (20Vdc to 28Vdc) polarized Operating Current: Alarm: 100mA Operating temperature: -10C to +50C Relative humidity: 95% Indicators: 16 Highlights Red LED, constantly lit when alarm Application: Indoor use Material and colour: ABS, Red Wiring: 1 pair polarized Dimensions: 280m110mm46mm

Features and Benefits

1. 2. 3. 4. 5. Normally installed above the entrance to a gas extinguishing control area. Will eliminate and activate internal sounder prior to gas release. "Gas Extinguishing DO NOT ENTER" is printed on the panel of the indicator. Highlight LED Compatible with GST series of gas extinguishing control panel

Wiring and Connection Connect the wires to the required terminal according to the diagram. The cable must be fire rated type and the size depends on the distance and application. Minimum size gauge 1.0mm(18 AWG). See installation and operation for more information.

1 PAIR FIRE CABLE

Description C-9318 Gas Extinguishing Warning Indicator is the accessory equipment of a gas extinguishing system. It's usually installed at the entrance of the protected area. After gas is released, the controller will activate the indicator to give visual indication warning people in field to take relative measures. This indicator is non-addressable and is used together with extinguishing control panel.
G1 R1 G2 R2 G1 R1 XT1 XT1

DO NOT GAS EXTINGUISHING CONTROL PANEL

XT2

DO NOT

XT2

WARNING INDICATOR A

WARNING INDICATOR B

Selection of compatible Control Panels Compatible with all GST Conventional and Addressable Gas Extinguishing Control System.

G1, R1 (XT1): To DC24V or GND, R terminal of extinguishing control panel, polarized. G2, R2 (XT2): Connecting with gas extinguishing warning indicator in series or with 4.7kresistor. Ordering Information:
Part No Description Weight /Kg Pack Qty per Box 1

C-9318

Gas Extinguishing Warning Indicator

0.850

Note: Specifications are subject to change without notice.

G2 R2

Gas

Gas