Scribd Logo
Unggah

Selamat datang di Scribd!

  • GST 301

    Diunggah oleh

    aditgroup
    78 tayangan1 halaman
    C-9317 Emergency Gas Override Control is used to control the start and stop of gas extinguishing system. When fire occurs in its protected area, press emergency start button, messages can be sent to gas extinguishing control panel, which will give gas extinguishing command and start the solenoid after delay.

    Judul Asli

    gst301

    Hak Cipta

    © Attribution Non-Commercial (BY-NC)

    Format Tersedia

    PDF, TXT atau baca online dari Scribd

    Apakah menurut Anda dokumen ini bermanfaat?

    Apakah konten ini tidak pantas?

    Laporkan Dokumen Ini
    C-9317 Emergency Gas Override Control is used to control the start and stop of gas extinguishing system. When fire occurs in its protected area, press emergency start button, messages can be sent to gas extinguishing control panel, which will give gas extinguishing command and start the solenoid after delay.

    Hak Cipta:

    Attribution Non-Commercial (BY-NC)
    Unduh sebagai PDF, TXT atau baca online dari Scribd
    Tandai sebagai konten tidak pantas
    78 tayangan1 halaman

    GST 301

    Diunggah oleh

    aditgroup
    C-9317 Emergency Gas Override Control is used to control the start and stop of gas extinguishing system. When fire occurs in its protected area, press emergency start button, messages can be sent to gas extinguishing control panel, which will give gas extinguishing command and start the solenoid after delay.

    Hak Cipta:

    Attribution Non-Commercial (BY-NC)
    Unduh sebagai PDF, TXT atau baca online dari Scribd
    Tandai sebagai konten tidak pantas
    dari 1

    Gas Extinguishing Control Panel GST301

    Primary and Standby cylinder key switch, that enables quick and easy transfer to the reserve cylinders, thus to ensure that the area can be left protected after an evacuation. The pre release gas countdown timer display on the panel to shows the amount of time left (in seconds) before the gas will be released, this is adjustable from 0- to 90 seconds, (all panels are sent factory set at 30 seconds delay). Technical Specification Features and Benefits 1. Double Knock Extinguishing Fire Zones 2. Aux. (non Extinguishing) Fire Zone. 3. Automatic and Manual extinguishing control 4. Numerical Onboard Timer Control 5. Adjustable Gas release delay Timer 6. Duty and Standby Cylinder control 7. Two phase evacuation sounders 8. Adjustable Solenoid Pulsed output 9. Compatible with all GST conventional detectors 10. Fully compliant to BS /EN /CE Operating voltage:220VAC +/- 15% Battery Requirement:2X12VDC, 7AH Battery operating time: 24 hours monitoring and half hour alarm AUX power supply:100mA/24VDC Sounder output:1A/24VDC Release output: 2A/24VDC, pulse Temperature: -10C ~ 55C Humidity: 95% Dimension:250X300X130mm

    Selection of compatible system GST Conventional Fire Detector GST Conventional Sounder and Bell C-9317 Emergency Start/Abort Switch C-9318 Gas Extinguishing Warning Indicator GST- Conventional Panel

    Description The GST301 conventional gas extinguishing control panel is packed with unique features that you have come to expect from a GST product that have enabled us to become world recognized as a leading manufacturer in the fire detection industry. The system provides 3 fire detection zones, two of which are utilized for double knock gas extinguishing control, and a third Auxiliary fire detection zone for additional areas out side of the gas protected area. This Zone will operate as a normal fire detection zone and have no interaction with the gas release system.

    Ordering Information:
    Part No Description Weight /Kg Pack Qty per Box 1

    GST 301

    Conventional Gas Extinguishing Control Panels

    3.09

    Anda mungkin juga menyukai