COMMERCIAL IN CONFIDENCE
COMMERCIAL IN CONFIDENCE
CONTENTS
1 IP Technology Certification Training ...................................................................................................................... 5 1.1 Training 1.2 1.3 1.4 1.5 2 HCDA-HNTD (Huawei Certified Datacom Associate-HuaWei Networking Technologies and Device) 5 HCDP-BCRN (Huawei Certified Datacom Professional-Building Carrier Routing Network) Training ........ 6 HCDP-BCAN (Huawei Certified Datacom Professional-Building Carrier Access Network) Training.......... 7 HCDP-BITN (Huawei Certified Datacom Professional-Building IP Telecom Network) Training................. 8 HCIE (Huawei Certified Internetwork Expert-Improve Carrier Network Performance) Training................. 9
Cloud Computing Certification Training ................................................................................................................ 11 2.1 HCNA-HCTD (Huawei Certified Network Associate- Huawei Cloud Technologies and Device) Training.. 11 HCNA-LTE (Huawei Certified Network Associate LTE) Training ........................................................12 HCNP-LTE (Huawei Certified Network Professional LTE) Training....................................................13 HCNP-EPC (Huawei Certified Network Professional EPC) Training..................................................14
Access Network..................................................................................................................................................15 4.1 4.2 Outline Huawei Certified Network Associate-Huawei Access Network Technologies and Device Training Outline 15 Huawei Certified Network Professional-Huawei Access Network Technologies and Device Training 15
Optical Network ..................................................................................................................................................16 5.1 5.2 Huawei Certified Network Associate-Huawei Optical Network Technologies and Device Training Outline 16 Huawei Certified Network Professional-Huawei Optical Network Technologies and Device Training Outline 16
Microwave Product .............................................................................................................................................17 6.1 6.2 Huawei Certified Network Associate-Huawei Microwave Technologies and Device Training Outline .......17 Huawei Certified Network Professional-Huawei Microwave Technologies and Device Training Outline ...18
Mobile Soft Switch ..............................................................................................................................................19 7.1 7.2 Outline Huawei Certified Network Associate-Huawei Mobile Soft Switch Technologies and Device Training Outline 19 Huawei Certified Network Professional-Huawei Mobile Soft Switch Technologies and Device Training 20
NGN...................................................................................................................................................................22 8.1 8.2 Huawei Certified Network Associate-Huawei NGN Technologies and Device Training Outline................22 Huawei Certified Network Professional-Huawei NGN Technologies and Device Training Outline ...........24
MGW&SBC ........................................................................................................................................................25 9.1 Huawei Certified Network Associate-Huawei MGW&SBC Technologies and Device Training Outline .....25
10
USC ...................................................................................................................................................................27 10.1 10.2 Huawei Certified Network Associate-Huawei USC Technologies and Device Training Outline ................27 Huawei Certified Network Professional-Huawei USC Technologies and Device Training Outline ............28
11
SG .....................................................................................................................................................................29 11.1 Huawei Certified Network Associate-Huawei SG Technologies and Device Training Outline ..................29
COMMERCIAL IN CONFIDENCE
11.2 12
Huawei Certified Network Professional-Huawei SG Technologies and Device Training Outline ..............30
GSM ..................................................................................................................................................................31 12.1 12.2 Huawei Certified Network Associate-Huawei GSM Technologies and Device Training Outline ...............31 Huawei Certified Network Professional-Huawei GSM Technologies and Device Training Outline ...........32
13
WCDMA .............................................................................................................................................................33 13.1 13.2 Huawei Certified Network Associate-Huawei WCDMA Technologies and Device Training Outline ..........33 Huawei Certified Network Professional-Huawei WCDMA Technologies and Device Training Outline ......34
14
CDMA ................................................................................................................................................................35 14.1 14.2 Huawei Certified Network Associate-Huawei CDMA Technologies and Device Training Outline .............35 Huawei Certified Network Professional-Huawei CDMA Technologies and Device Training Outline .........37
15
Wimax................................................................................................................................................................39 15.1 Huawei Certified Network Professional-Huawei Wimax Technologies and Device Training Outline.........39
16
GSM RNP&RNO ................................................................................................................................................40 16.1 16.2 Huawei Certified Network Associate- Huawei GSM RNP&RNO Technology Training Outline .................40 Huawei Certified Network Professional - Huawei GSM RNP&RNO Technology Training Outline ............41
17
WCDMA RNP&RNO ...........................................................................................................................................42 17.1 17.2 Huawei Certified Network Associate-WCDMA RNP&RNO Training Outline ...........................................42 Huawei Certified Network Professional-WCDMA RNP&RNO Training Outline .......................................42
18
CDMA RNP&RNO ..............................................................................................................................................43 18.1 18.2 Huawei Certified Network Associate-Huawei CDMA RNP&RNO Technologies Training Outline .............43 Huawei Certified Network Professional-Huawei CDMA RNP&RNO Technologies Training Outline .........44
19
Microwave RNP..................................................................................................................................................46 19.1 19.2 Huawei Certified Network Associate-Huawei Microwave RNP Technologies Training Outline .................46 Huawei Certified Network Professional-Huawei Microwave RNP Technologies Training Outline.............47
20
Site and Power System .......................................................................................................................................48 20.1 Outline Huawei Certified Network Associate- -Huawei Site and Power System Technology and Device Training 48
21
Hybrid Power Supply ..........................................................................................................................................49 21.1 Outline Huawei Certified Network Associate- Huawei Hybrid Power Supply Technology and Device Training 49
22
Hardware Installation Supervision (excluding RF products) ..................................................................................49 22.1 Outline Huawei Certified Network Associate-Hardware Installation Supervision (excluding RF products) Training 49
23
Hardware Installation Supervision (including RF products) ...................................................................................50 23.1 Outline Huawei Certified Network Associate-Hardware Installation Supervision (including RF products) Training 50
COMMERCIAL IN CONFIDENCE
Target Audience
This program is intended for those who are to be certified by HCDA exam
Prerequisites
Be familiar with Windows operating system Know the basic function and conception of computer network
Objectives
On completion of this program, the participants will be able to: Describe the hierarchical structure of IP network and the function of each layer Describe Ethernet evolution and relative technology Outline network security and firewall concepts
Duration
8 working days
Class Size
Min 6max 12
COMMERCIAL IN CONFIDENCE
1.2 HCDP-BCRN (Huawei Certified Datacom Professional-Building Carrier Routing Network) Training
Training Path
HCDP-BCRN (Huawei Certified Datacom Professional-Building Carrier Routing Network) ODC02 Lecture, Hands-on exercise 9d MP-BGP for IPv6 Configure BGP/MP-BGP for IPv6 in VRP platform and use BGP route attributes and route policy to select and filter routing in large network based on demand Describe the working principle and function of BGP route reflector and confederation Describe the BGP multi-homed basic concepts and application scenarios Troubleshoot the BGP peer establishtion failures,routing learning failures and path Have got the HCDA certification or have equivalent technical level selection failures Flexibly apply the common route selection tools(Access control list,ip-prefix,as-path-filter,community-filter,route -policy) Describe the working principle of multicast protocol(IGMP,PIM-SM,PIM-DM) Configure IGMP/PIM-SM/PIM-DM in VRP platform Describe NE5000E/NE5000E-X16 series hardware features Describe NE80E/NE40E and NE40E-X series hardware features Select the appropriate Huawei middle and high end routers based on the device performance and service requirement to build the large network and deploy the service Locate and remove routing problems in large scale IP network
Target Audience
This program is intended for those who are to be certified by the HCDP-BCRN exam
Prerequisites
Objectives
On completion of this program, the participants will be able to: Flexibly apply the VLSM technique to design IP addresses Flexibly apply the CIDR technique to aggregate the routes Describe the IPv6 basic packets and the IPv6 address structure Describe the basic protocol of IPv6 (ICMPv6, ND, IPv6 address allocation protocol) Describe the working principle of OSPFv2/v3 routing protocol Describe several OSPF special areas Troubleshoot OSPF neighbor relationship failures and routing failures Describe the working principle of ISIS routing protocol in IPv4 and IPv6 Troubleshoot ISIS common neighbor relations failure and routing failures Configure OSPF and ISIS in VRP platform to realize the IP connectivity of the large network Describe the working principle of BGP and
Duration
9 working days
Class Size
Min 6max 12
COMMERCIAL IN CONFIDENCE
1.3 HCDP-BCAN (Huawei Certified Datacom Professional-Building Carrier Access Network) Training
Training Path
HCDP-BCAN (Huawei Certified Datacom Professional-Building Carrier Access Network) ODC03 Lecture, Hands-on exercise 6d Configure VLAN, GVRP, QinQ, STP, RSTP, MSTP in VRP platform Apply VLAN, GVRP, QinQ to access network to implement user isolation and service transportation Apply STP, RSTP, MSTP in access network to avoid loop Deploy PPPoE, IPoE, IPoEoVLAN in access network Perform the troubleshooting about VLAN, GVRP, QinQ, STP, RSTP, MSTP, PPPoE, IPoE, Have got the HCDA certification or have equivalent technical level IPoEoVLAN in access network Choose appropriate Huawei switches and BRAS devices in access network deployment
Target Audience
This program is intended for those who are to be certified by HCDP-BCAN exam
Prerequisites
Objectives
On completion of this program, the participants will be able to: Describe the working principle of VLAN, GVRP, QinQ, STP, RSTP, MSTP Describe the working principle of PPP, PPPoE, IPoE, IPoEoVLAN
Duration
6 working days
Class Size
Min 6max 12
COMMERCIAL IN CONFIDENCE
Target Audience
This program is intended for those who are to be certified by the HCDP-BITN exam
Prerequisites
Objectives
On completion of this program, the participants will be able to: Describe the features and performance of IP bearer network Describe the basic principle of MPLS Describe the basic process of MPLS data forwarding Describe the basic concepts and principles of the MPLS LDP Description the MPLS LDP label management mechanism and the loop protection mechanism Configure MPLS LDP in VRP platform Describe the basic concepts and basic
Duration
7 working days
Class Size
Min 6max 12
COMMERCIAL IN CONFIDENCE
1.5 HCIE (Huawei Certified Internetwork Expert-Improve Carrier Network Performance) Training
Training Path
Advanced Routing Features Principle and Configuration ODC05 Lecture, Hands-on exercise 2d
Target Audience
This program is intended for those who are to be certified by the HCIE exam
Prerequisites
Have got the HCDP certification or have the equivalent technical knowledge level
Advanced MPLS VPN Features Principle and Configuration ODC06 Lecture, Hands-on exercise 7d
Objectives
On completion of this program, the participants will be able to:
Describe NE5000E/80E/40E advanced routing features Configure NE5000E/80E/40E advanced routing features Troubleshoot NE5000E/80E/40E advanced routing features Describe MAN typical network structure and routing design features
Deploy routing protocol in MAN Optimize routing protocol deployment in MAN Troubleshoot the typical Failure of routing protocol in MAN Describe NE5000E/80E/40E advanced MPLS L3VPN and L2VPN features 2d Configure NE5000E/80E/40E advanced MPLS L3VPN and L2VPN features Troubleshoot NE5000E/80E/40E advanced MPLS L3VPN and L2VPN features 4d Describe IGMP principle and configuration Describe PIM-SM principle and configuration Describe PIM-SSM principle and configuration Analyse MSDP basic working principle 4d Describe MSDP RPF detection Describe MSDP application Describe Multicast VPN function and technical solution Describe MD VPN concepts and working principle
BRAS Access Service Features and Realization ODC10 Lecture, Hands-on exercise
IP Bearer Network Design and Service Deployment ODC12 Lecture, Hands-on exercise
COMMERCIAL IN CONFIDENCE
Configure and troubleshoot MD VPN Describe the QoS technology Configure QoS in the NE series routers Analyse and troubleshoot the common faults of QoS configuration in the NE series routes Describe the HQoS working principle in NE5000E80E40E Describe the HQoS scheduling process in NE5000E80E40E Describe the HQoS realization and application Describe HA basic concepts and HA classification Describe BFD principles and typical applications Describe NSR principle Describe the various protection switching technology and in NE5000E80E40E product Describe end-to-end HA features realization in IP bearer network Describe ME60&ME60-X series products hardware Describe ME60&ME60-X series products Features Describe the function of BRAS related components Analyse the ME60 PPP service working process Analyse the ME60 IP service working process Analyse the ME60 Leased line service working process Describe the ME60 Multicast Feature and Realization Describe IGP deployment in MAN Describe IGP fast convergence deployment in MAN Configure and adjust OSPF/ISIS in MAN Describe BGP deployment in MAN Describe BGP RR deployment in MAN Describe route control and route selection in IP
MAN Configure and adjust BGP in MAN Describe the devices and interfaces of core network Describe the solutions of IP bearer network access part Configure HA features of IP bearer core network Describe the fast convergence of routing protocols Describe the MPLS TE FRR and VPN FRR technologies of IP bearer network backbone Describe the GR technologies of IP bearer network Configure IGP/BGP and VPN of IP bearer core network Configure fast detection technologies of IP bearer network Configure fast convergence of routing protocols Configure MPLS TE FRR and VPN FRR technologies of IP bearer network backbone Configure GR technologies of IP bearer network Describe different QoS requirement of different services in IP bearer network Describe end to end QoS realization in IP bearer network Configure end to end QoS in IP bearer network Help candidates to be familiar with examination mode,examination rules, and examination environment
Duration
25 working days
Class Size
Min 2max 6
COMMERCIAL IN CONFIDENCE
10
Target Audience
Prerequisites
Be familiar IT foundation knowledge.
Objectives
COMMERCIAL IN CONFIDENCE
11
Performing Common OceanStor Management Tasks. Understand Switch Management Port Features. Understand Switch Management Features. Performing Common Switch Management Tasks. Describe VDesktop6000 networking. Describe VDesktop6000 structure and functions. Describe VDesktop6000 service flow. Perform VDesktop6000 count management. Perform VDesktop6000 asset management. Perform VDesktop6000 DDC management.
Perform VDesktop6000 system backup. Perform VDesktop6000 performance management. Describe TCs Terminal Types. Describe TCs Characteristics. Understand TC Configuration and Management.
Duration
9 workdays ( 2 days, optional + 7 days)
Target Audience
This training program is intended for those who are to take the HCNA-LTE certification exam and those who hope to learn about basic LTE/SAE principles and Huawei LTE equipment.
Prerequisites
Be familiar with basic wireless communication principles
Objectives
After the completion of this program, participants will be able to understand: Basic pinciple of LTE air interfaces
Duration
6 workdays
COMMERCIAL IN CONFIDENCE
12
Target Audience
This training program is intended for those who are to take the HCNP-LTE certification exam and those who hope to learn about detailed LTE principles and Huawei LTE equipment.
Prerequisites
Be familiar with basic LTE principles
Duration Objectives
After the completion of this program, participants will be able to: Understand structure of LTE /EPC Understand detailed principle of LTE air interface 16 persons 10 workdays
COMMERCIAL IN CONFIDENCE
13
Target Audience
Prerequisites
Be familiar with basic EPC principles
Objectives
After the completion of this program, participants will be able to: Describe system structure and hardware structure of USN9810 Perform software related installation and upgrade procedure Perform hardware operation and maintenance Perform the routing operation and maintenance including security management, system information management, alarm management, trace management , data management, license management ,performance management Describe the functions of protocol stacks of different interfaces Perform configuration of USN hardware, System Information, interworking with eNodeB, HSS, MME,
Duration
12 workdays
COMMERCIAL IN CONFIDENCE
14
16 persons
4 Access Network
4.1 Huawei Certified Network Associate-Huawei Access Network Technologies and Device Training Outline
Training Mode
Huawei Access Network Technologies and Device Training Lecture, Hands-on exercise 11 d will be able to: Understand xDSL/ATM/GPON/EPON/DataCom theory. Be familiar with hardware construction, features, board types, functions and interfaces Know how to install/commission/configure access equipment hardware. Perform upgrade task under CLI of equipment. This training program is intended for those who hope to learn about basic access network theory. Be familiar with HSIIPTVVOIP acceptance test. Understand basic theory of NMS and SNMP, can use NMS add and monitor equipment.
Target Audience
Prerequisites
Be familiar with windows operation system. Know well about computer network Understand basic data communication theory Understand basic fiber communication theory
Duration
11 workdays Maximum Class Size 16 persons
Objectives
After the completion of this program, participants
4.2 Huawei Certified Network Professional-Huawei Access Network Technologies and Device Training Outline
Training Mode Target Audience
This training program is intended for those who H Huawei Access Network Technologies and Device Training Lecture, Hands-on exercise 13d expect to learn more about the Access network commissioning, maintenance and troubleshooting
Prerequisites
Function well on maintenance and commissioning of Huawei equipments
COMMERCIAL IN CONFIDENCE
15
Be familiar with the typical solutions for Access Network migration and the usage of the migration tools Be familiar with NMS installation, basic NMS service configuration, NMS operating system and basic database commands for troubleshooting of access products.
Objectives
After the completion of this program, participants will be able to: Be familiar with HSIIPTVVOIP test item and test function. Be familiar with problem locating on xDSL/ATM/GPON/EPON Be familiar with problem maintenance of access network products. Perform data plan and network design for FTTx.
Duration
13 workdays
5 Optical Network
5.1 Huawei Certified Network Associate-Huawei Optical Network Technologies and Device Training Outline
Training Mode
Huawei Optical Network Technologies and Device Training Lecture, Hands-on exercise 15 d Understand SDH/WDM/data communication theory. Be familiar with hardware construction, features, board types, functions and interfaces Know how to install/commission/configure optical equipment hardware. Understand DC tool, board-level loading and simulation package loading of software. This training program is intended for those who want to take the HCNA certification exam and those who hope to learn about basic optical network principles . Be familiar with MSTP/HMSTP/WDM acceptance test. Understand basic theory of NMS and SNMP, can use NMS add and monitor equipment.
Target Audience
Prerequisites
Be familiar with windows operation system. Know well about computer network Understand basic data communication theory Understand basic fiber communication theory
Duration
15 workdays
Objectives
After the completion of this program, participants will be able to:
5.2 Huawei Certified Network Professional-Huawei Optical Network Technologies and Device Training Outline
COMMERCIAL IN CONFIDENCE
16
Training Mode
Huawei Optical Network Technologies and Device Training Lecture, Hands-on exercise 10 d
will be able to: Be familiar with MSTP/WDM test item and test function. Be familiar with OAM/QoS feature and function of MSTP Be familiar with problem locating on SDH/WDM Be familiar with problem maintenance of optical network products. Be familiar with data collection and basic service planning of optical product. Be familiar with NMS installation, basic NMS service configuration, NMS operating system and basic database commands for troubleshooting of optical products.
Target Audience
This training program is intended for those who want to take the HCNP certification exam and personnel who expect to learn SDH and WDM network commissioning, maintenance and network reconstruction
Prerequisites
Function well on maintenance and commissioning of huawei equipments Be familiar with optical network communication theory
Duration
10 workdays
Objectives
After the completion of this program, participants
6 Microwave Product
6.1 Huawei Certified Network Associate-Huawei Microwave Technologies and Device Training Outline
Training Mode
will be able to: Describe the concept and characters of digital microwave communication. Huawei Microwave Technologies and Device Training Lecture, Hands-on exercise 9d Describe the theory and function of every parts in the digital microwave system. List the networking application for digital microwave systems. Describe the Ethernet basic knowledge. Describe the main characteristics of OptiX RTN 600. Describe the system structure, function and application of every unit in RTN 600. List out the 1+1 protection technology in OptiX RTN 600 hybrid microwave network. Be familiar with the Windows operating system. Know basic functions of the computer network. Describe the main characteristics of OptiX RTN 900. Describe the system structure, functions and application of every unit in RTN 900. Describe the networking application under PDH/SDH
Target Audience
This training program is intended for those who are to take the HCNA-HMTD certification exam and those who hope to learn about Huawei microwave equipment operation and maintenance.
Prerequisites
Objectives
After the completion of this program, participants
COMMERCIAL IN CONFIDENCE
17
and hybrid microwave modes. List out the protection technologies in OptiX RTN 900 network. Describe the features and applications of the protection technologies. List out the installation procedure for RTN equipment. Finish proper preparations before the commissioning. Perform site commissioning of the OptiX RTN 900. Perform system commissioning of the OptiX RTN 900. Configure radio links of the OptiX RTN 900. Configure TDM services of the OptiX RTN 900. Configure Ethernet services of the OptiX RTN 900. Configure SNCP/MSP/ERPS/LAG for OptiX RTN 900. Outline the general safety precautions of OptiX RTN 900.
List the routine maintenance items of OptiX RTN 900. Implement the maintenance operation of OptiX RTN 900. Judge the common faulty in OptiX RTN 900. Implement the software upgrade operation of OptiX RTN 900. Implement the data collection operation of OptiX RTN 900. Monitor the RTN equipment via the NMS.
Duration
9 workdays
6.2 Huawei Certified Network Professional-Huawei Microwave Technologies and Device Training Outline
Training Mode
Outline the typical PWE3 encapsulation format for TDM, Ethernet and ATM services. Huawei Microwave Technologies and Device Training Lecture, Hands-on exercise 7d Outline the PWE3 application scenarios of OptiX RTN 900. Outline the steps of RTN 900 service configuration in packet plane. Implement Ethernet service/CES service/ATM/IMA services configuration in packet plane via NMS. This training program is intended for those who are to take the HCNP-HMTD certification exam and those who hope to learn Huawei microwave equipment. Implement QoS/OAM/Clock configuration via NMS. Implement the Ethernet service test via smartbits. Install the U2000 Single-Server System Software. Describe the system structure of U2000. Describe the general troubleshooting flow of OptiX RTN 900. Outline the methods of faults analyzing and locating. Perform the common troubleshooting for OptiX RTN After the completion of this program, participants will be able to: Describe the classification of IP addresses. Describe the basic principle of IP routing. Describe the basic concepts of MPLS. Describe the MPLS tunnel (LSP) creation procedure. Outline the MPLS OAM functions. Describe the basic concepts of PWE3. 900. Identifying Radio Link Faults.
Target Audience
Prerequisites
Take the HCNA-HMTD certification
Objectives
Duration
7 workdays
COMMERCIAL IN CONFIDENCE
18
Target Audience
MSOFTX3000 Field Maintenance Technicians, First Line Maintenance Technicians or Routine Maintenance Technicians/Engineers
Prerequisites
2d None
Objectives
After the completion of this program, participants 1d will be able to: Outline the development of GSM and UMTS. Describe the architecture of GSM and UMTS system. 4d Describe the Networking and Interfaces of GSM NSS and UMTS R4. Describe the fundamental of mobile softswitch technology. 5d Describe basic call control flows in UMTS R4 network. Describe various types of bearer establishment in UMTS R4 network. Describe basic calling flow in UMTS R4 network. 2d Describe the hierarchical structure of an IP network and the functions of each layer. Describe the MSOFTX3000 system structure, functions, and key characteristics(CPCI). 2d Describe the function, indicators, ports and working mode of each board(CPCI). Explain the types and applications of different fibers and 1d cables(CPCI). Describe the toggle switch in MSOFTX3000(CPCI). Perform operation through LMT(CPCI).
MSOFTX3000 Basic Data Configuration Lecture, Hands-on O exercise W G2 4 MSOFTX3000 Routine Operation and Maintenance Lecture, Hands-on O exercise W G2 2 MSOFTX3000 Delta Training(ATCA) Lecture O W G4 4 UMG8900 Routine Operation and Maintenance Lecture, Hands-on O exercise W H2 2 UMG8900 Hardware System OWH10 Lecture
UMG8900 Software&Patch Loading Lecture, Hands-on O exercise W H1 1 UMG8900 Data Configuration O W H3 0 Lecture, Hands-on exercise 1d
Describe MSOFTX3000 data configuration method and procedure(CPCI). Edit the data configuration scripts of MSOFTX3000(CPCI). Perform hardware data configuration(CPCI). 2d
COMMERCIAL IN CONFIDENCE
19
Perofrm local office data configuration. Perform the data configuration to MGW, RNC, HLR and PSTN. Understand the usage of common commands. Perform system data backup and restoration. Perform daily alarm and statistic management task. Understand the operation flow of parts replacement and implementing technical protection measures. Perform MSOFTX3000 parts replacement and check the components running status. Manage tracing tasks. Perform the routine operation and maintenance tasks (daily, weekly and monthly). Understand troubleshooting procedure and common troubleshooting methods. Perform common hardware, interfaces, service troubleshooting. Describe the MSOFTX3000 system structure, functions, and key characteristics(ATCA). Describe the function, indicators, ports and working mode of each board(ATCA). Explain the types and applications of different fibers and cables(ATCA). Describe the toggle switch in MSOFTX3000(ATCA). Perform operation through LMT(ATCA). Describe MSOFTX3000 data configuration method and procedure(ATCA). Edit the data configuration scripts of MSOFTX3000(ATCA). Perform hardware data configuration(ATCA). Describe the UMG8900 system functions, structures and key characteristics. Describe the function, indicators, ports and working mode of each board. Explain the types and applications of different fibers and
cables. Describe the toggle switch in UMG8900. Perform operation through LMT. Perform UMG8900 Software&Patch Loading Describe the UMG8900 data configuration method and procedure. Edit the data configuration scripts for UMG8900. Execute the data configuration script. Perform the dynamic data configuration and modification. Perform UMG8900 system data, interfaces data and resource data configuration. Perform system data backup and restoration, execute MML commands, etc. Understand the operation flow of parts replacement and implementing technical protection measures. Perform UMG8900 parts replacement and check the components running status. Manage tracing tasks. Monitor alarms of UMG8900. Perform the routine operation and maintenance tasks (daily, weekly and monthly). Understand troubleshooting procedure and common troubleshooting methods. Perform common hardware, interfaces, service troubleshooting. Perform UMG8900 software&Patch reloading and path upgrading
Duration
21 work days
7.2 Huawei Certified Network Professional-Huawei Mobile Soft Switch Technologies and Device Training Outline
COMMERCIAL IN CONFIDENCE
20
Training Mode
MSOFTX3000 Emergency Maintenance OWG36 Lecture, Hands-on exercise 1d
Perform the dynamic data configuration and modification. Understand deeply number analysis concepts and working principle in MSOFTX3000. Perform number analysis configuration and testing task, including call barring analysis, failure processing data, equal access data, etc. 2d Understand deeply IN service concepts and processing flow in MSOFTX3000. Perform IN service configuration and testing task, including DP data, SCP data, IN service data, IN 2d announcement data, etc. Understand deeply IN service concepts and processing flow in MSOFTX3000. Perform IN service configuration and testing task, 5d including DP data, SCP data, IN service data, IN announcement data, etc. Understand deeply Dual-homing concepts, networking modes and switchover modes in MSOFTX3000. 5d Use the emergency maintenance tools and platform, and understand device and service emergency maintenance procedure. Perform complex hardware, interfaces, service 1d troubleshooting. Describe BSSAP protocol stack and function. Analysis main procedures of BSSAP (Paging, Initial MS 5d Message, Cipher Mode Control, Assignment, Handover, Release, DTAP Message). Describe Iu interface protocol stack and function. Describe classification of RANAP messages. Analysis Iu connection Management, RAB assignment, SRNS Relocation CS Domain MM, CC procedures in Iu Interfaces. Perform protocol stack and main functions of SIGTRAN. Analysis SCTP association establishment and close flows. Describe UA concepts introduction (AS, SG, IPSP, Entity, Routing key). Perform messages analysis of SCTP, M2UA, and M3UA. Describe H.248 Protocol stack and functions. Perform message analysis of H.248 based on scenario. Describe BICC protocol stack and functions.
MSOFTX3000 Advanced Data Configuration Lecture, Hands-on OWG30 exercise MSS Signaling Analysis OWA04 Lecture, Hand-on practice
Target Audience
Core network commissioning engineers, operation and maintenance engineers, optimization engineers
Prerequisites
At least two years experience of operation and maintenance of GSM NSS/UMTS CS or other telecommunication equipments A basic knowledge of mobile communication and soft switch principle
Objectives
After the completion of this program, participants will be able to: Edit the data configuration scripts of MSOFTX3000.
COMMERCIAL IN CONFIDENCE
21
Analysis key parameters of BICC. Analysis BICC message. Describe MSC Pool networking. Describe principles related to the MSC Pool features. (The load balancing of MSC Pool, Handover in MSC Pool, Disaster tolerance in MSC Pool, Subscriber migration in MSC Pool, A-Flex by the MGW, Managing A-Interface Circuits on the MGW, Charging based on Virtual MSC IDs or Location Areas). Describe MSC Pool configuration flow overview. Perform MSC Pool feature configuration in MSC Server and MGW. Perform MSC Pool configuration based on different scenarios (NNSF implemented by RNC, NNSF implemented by MGW, Restructure MSC Pool based on current network). Monitor MSC Pool Load in real time. Operate performance report of the MSC Pool. Perform migration of subscribers.
Perform MSC Pool configuration synchronization between NE and M2000. Perform end-to-end tracing of calls on the MSC Pool. Perform the dynamic data configuration and modification. Check the data configuration correctness and validity. Use the emergency maintenance tools and platform, and understand emergency maintenance procedure. Handle UMG8900 device and service fault and perform emergency recovering. Perform complex hardware, interfaces, signaling, service networking troubleshooting.
Duration
21 workdays
8 NGN
8.1 Huawei Certified Network Associate-Huawei NGN Technologies and Device Training Outline
Training Mode
Huawei NGN Primary Training OAX01 20 d
COMMERCIAL IN CONFIDENCE
22
Target Audience
This training program is intended for those who are to take Huawei NGN Primary certification exam and those who hope to learn about basic NGN principles and Huawei NGN equipment.
Outline the service data configuration steps of UMG8900, and execute the common service data configuration (TG data configuration, SG data configuration). Outline the service data configuration steps of MRS6100, and execute the system data configuration and the voice file loading. Outline the service data configuration steps of SG7000, and execute the common service data configuration (MTP data configuration, M3UA data configuration). Outline the service data configuration steps of SE2300, and execute the common service data configuration (SNMP data configuration, signaling PROXY and media PROXY data configuration). Perform the software installation and the service configuration of U-Path. Maintenance & Troubleshooting Perform the routine operation and maintenance of SoftX3000 (operator authority management, database backup and restoration, data consistent checking between the host and BAM, log management, alarm management, device management, media gateway management, protocol and signaling management, trunk circuit management, subscriber management, bill management). Perform the routine operation and maintenance of iGWB. Perform the routine operation and maintenance of UMG8900 (database backup, log management, alarm management, device management, protocol tracing, service management). Perform the routine operation and maintenance of MRS6100 (log management, alarm management, device management, message tracing). Perform the routine operation and maintenance of SG7000 (database backup, log management, alarm management, device management, signaling tracing). Perform the routine operation and maintenance of SE2300 (log management, alarm management, device management, signaling PROXY and media PROXY debugging). Perform the routine operation and maintenance of U-Path (log management, system status browsing, and bill management).
Prerequisites
Be familiar with the Windows operating system. Know basic functions of the computer network.
Objectives
After the completion of this program, participants will be able to: Principle Describe the basic concepts, system architecture, services, networking and applications of NGN. Outline the components, services, networking and applications of Huawei U-SYS solution. Explain the functions, features, applications, terms, stack structure and messages of NGN protocols (MGCP, H.248, SIP, SIGTRAN). Product Introduction Describe the network topology, services, functions, system structure, board functions, board indicators, networking, applications and technical specifications of SoftX3000/UMG8900/SG7000/MRS6100/SE2300. Describe the network topology, services and functions of U-Path. Basic Data Configuration Perform the hardware and local office data configuration of SoftX3000. Perform the hardware data configuration, MGW data configuration and IP bearer data configuration. Perform the hardware data configuration of MRS6100. Perform the hardware data configuration and local office data configuration of SG7000. Data Configuration & acceptance testing Outline the service data configuration steps of SoftX3000, and execute the common service data configuration (charging data configuration, media gateway data configuration, protocol data configuration, SS7 signaling data configuration, routing data configuration, trunk data configuration, number analysis data configuration, subscriber data configuration).
COMMERCIAL IN CONFIDENCE
23
Duration
20 workdays
8.2 Huawei Certified Network Professional-Huawei NGN Technologies and Device Training Outline
Training Mode
Huawei NGN Secondary Training OAX02 11 d Describe the system structure and configuration of iGWB. List the means of improving voice quality of NGN. Describe the working principle and service processing procedure of UMG8900. Describe the working principle, announcement principle and service processing procedure of MRS6100. This training program is intended for those who have pass the Huawei NGN Primary certification exam and those who hope to learn about in-depth NGN principles and Huawei NGN equipment. Basic Data Configuration Execute the service data configuration of SoftX3000 (number changing data configuration, call barring data configuration). Perform the language conversion of voice and voice loading of MRS6100. Execute the service data configuration of SG7000 (MTP load sharing data configuration). Data Configuration & acceptance testing Perform data planning and data configuration of NGN dual home. After the completion of this program, participants will be able to: Principle Explain the command parameters and call processing procedure of NGN protocols. Describe the principle, application of NGN dual home. Describe the NGN C4 and C5 office migration solution. Product Introduction Describe the working principle and service processing procedure of SoftX3000. Describe the principle, processing procedure, operation and original bill format of NGN charging system 11 workdays Perform the NGN C4 and C5 office migration operation. Maintenance & Troubleshooting Perform the routine maintenance of NGN dual home. Perform the common problem analysis and processing of NGN protocols. Perform the troubleshooting of NGN network.
Target Audience
Prerequisites
Successfully pass the Huawei NGN Primary certification exam At least a half year of experience in the operation and maintenance of NGN
Objectives
Duration
COMMERCIAL IN CONFIDENCE
24
9 MGW&SBC
9.1 Huawei Certified Network Associate-Huawei MGW&SBC Technologies and Device Training Outline
Training Mode
Know about WCDMA Core Network Evolution and main versions; NGN/GSM/UMTS Softswitch Fundamental OWA02 Lecture 1d Understand the network architecture and function entity of GSM/R99/R4,and the interface and protocol; Understand bearer and control separated architecture;Understand the function and application of UMG8900 Hardware System OWH10 Lecture 1d MSOFTX3000 and UMG8900; Understand the definition and architecture of NGN and every layer's functions;Konw about the location of UMG8900 in NGN. Understand SIGTRAN's function,M3UA's basic conceptsfunction and application; 1d Understand M2UA's concepts protocol stacks and main parameters; Understand UMG8900's TDM bearer and data configuration of SG(MTP3-M3UA); OWH30 Lecture, Hands-on exercise 2d Understand SIGTRAN's function,M3UA's basic conceptsfunction and application; UMG8900 Routine Operation and Maintenance OWH22 Lecture, Hands-on exercise 2d Understand M2UA's concepts protocol stacks and main parameters; Understand UMG8900's TDM bearer and data configuration of SG(MTP3-M3UA); Describe the UMG8900 system functions, structures 2d and key characteristics. Describe the function, indicators, ports and working mode of each board. Explain the types and applications of different fibers and cables. Describe the toggle switch in UMG8900. Perform operation through LMT. Perform UMG8900 Software&Patch Loading Describe the UMG8900 data configuration method and procedure. Edit the data configuration scripts for UMG8900. Execute the data configuration script. Perform the dynamic data configuration and modification. Perform UMG8900 system data, interfaces data and resource data configuration.
Target Audience
UMG8900&SBC Field Maintenance Technicians, First Line Maintenance Technicians or Routine Maintenance Technicians/Engineers
Prerequisites
At least one year experience of operation and maintenance of GSM NSS/UMTS CS or other telecommunication equipments Being familiar with Windows operation A basic knowledge of mobile communications
Objectives
On completion of this program, the participants will be able to:
COMMERCIAL IN CONFIDENCE
25
Perform system data backup and restoration, execute MML commands, etc. Understand the operation flow of parts replacement and implementing technical protection measures. Perform UMG8900 parts replacement and check the components running status. Manage tracing tasks. Monitor alarms of UMG8900. Perform the routine operation and maintenance tasks (daily, weekly and monthly). Understand troubleshooting procedure and common troubleshooting methods. Perform common hardware, interfaces, service troubleshooting. Perform UMG8900 software&Patch reloading and path upgrading
Describe related concepts of SBC, working principle of full proxy. Describe main functions and features of SE2600 in IMS network. Describe call flow analysis. Describe hardware structure of SE2600. Perform interconnection data configuration. Perform service data configuration. Perform maintenance tasks for SE2600. Perform SE2600 troubleshooting.
Duration
9 working days
Class Size
max 16
COMMERCIAL IN CONFIDENCE
26
10 USC
10.1 Huawei Certified Network Associate-Huawei USC Technologies
Target Audience
SingelSDB GUHLR9820 project installation and configuration Engineers;
Prerequisites
A basic knowledge of mobile communication
Objectives
On completion of this program, the participants will be able to: Understand System Structure and Principles: Describe the architecture of Huawei SingleSDB system Describe the Networking and Interfaces of Huawei SingleSDB Describe the hardware, logical structure of Huawei SingleSDB Describe the typical configurations of SingleSDB products
COMMERCIAL IN CONFIDENCE
27
Duration
10 working days
Class Size
Min 5max 15
10.2
COMMERCIAL IN CONFIDENCE
28
Training Mode
Objectives
On completion of this program, the participants will be able to: Describe the internal networking and IP planning of HLR9820 Describe Redundancy Principle and Key parameters of configuration Describe DS Principle Data synchronization,
consistency and Replication Principle Describe Baseline establishment, increment data synchronization, recovery operation Perform LMT MML Operation and HLR9820 routine maintenance Perform Security Management, Alarm Operations, 3.5 d Message Tracing and Performance Operations Perform Database backup and restoration HLRV9 Equipment fault information collection and processing 1d Procedures and methods of fault location and troubleshooting: Use the system maintenance tools Perform system management, cluster management, disk management and Database management
Target Audience
Senior Technical Support Engineer;
Prerequisites
Successful completion of the program SingleSDBG/U HLR9820Engineering Training Or At least one year experience of HLR9820 operation
Duration
4 working days
Class Size
Min 5max 15.
11 SG
11.1 Huawei Certified Network Associate-Huawei SG Technologies and
COMMERCIAL IN CONFIDENCE
29
Training Mode
Describe the basic function of SCCP. State the format of SCCP message and the meaning of the message which are often used. Describe the basic concept of SIGTRAN, the structure 5d and signaling procedures of M2PA/M3UA. Describe SG7000 system structure and hardware architecture, including the cabinet, frame, board and the performance features of SG7000. Describe SG7000 logical architecture and signaling flow. Configure the hardware data, narrowband link data and broadband link data. Implement the common operation of maintenance such as message tracing, log management, alarm management and link management. Perform SG7000 client software installation. Perform SCCP and M2PA data configuration of SG7000.
Target Audience
This training program is intended for those who are to take Huawei Certified Network Associate-Huawei SG Technologies and Device certification exam and those who hope to learn about basic SG7000 principles and Huawei SG7000 equipment.
Prerequisites
Be familiar with the Windows operating system. Know basic functions of the computer network.
Objectives
After the completion of this program, participants will be able to: Describe the basic concepts, architecture, MTP functions of SS7 Signaling System and signaling network.
Duration
5 workdays
11.2
COMMERCIAL IN CONFIDENCE
30
Target Audience
This training program is intended for those who have pass the Huawei Certified Network Professional-Huawei SG Technologies and Device certification exam and those who hope to learn about in-depth SG7000 principles and Huawei SG7000 equipment.
will be able to: Describe the basic principle of MNP service. Perform SG7000 MTP loadsharing data configuration. Perform SG7000 SCCP loadsharing data configuration. Describe the troubleshooting method of SG7000. Perform information collection of SG7000 trouble. Locate the hardware trouble, link trouble and SCCP layer trouble.
Prerequisites
Successfully pass the Huawei SG7000 Primary certification exam At least a half year of experience in the operation and maintenance of SG7000
Duration
2 workdays
Objectives
After the completion of this program, participants
12 GSM
12.1 Huawei Certified Network Associate-Huawei GSM Technologies
COMMERCIAL IN CONFIDENCE
31
5.Master typical configuration of BTS3900/DBS3900 GSM Huawei Certified Network Associate-Huawei GSM Technologies and Device Lecture, Hands-on exercise 11 d (MBTS) Engineering survey and hardware installation 1.Master the engineering survey approaches of site controller and site 2.Master the installation design approaches of site controller and site 3.Master the hardware installation approaches of site controller and site (including feeder system, monitoring, and other peripherals) Software Commissioning 1.Master the remote and local commissioning approaches of the site Be familiar with the Windows operating system. Know basic functions of the computer network. 2.Master the site integration approaches 3.Master the site service testing approaches 4.Master the using methods of testing tool and know the meaning of testing indicators Acceptance testing 1.Master the hardware quality standard 2.Master the acceptance approaches of a single-site (including service testing) Maintenance and troubleshooting 1. Master the site operation& maintenance approaches 2.Capable of independently dealing with hardware replacement and information collection of site 3.Capable of independently dealing with site problems and emergency recovery on-site
Target Audience
This training program is intended for those who are to take the HCNA certification exam and those who hope to learn about basic GSM principles and Huawei GSM equipment.
Prerequisites
Objectives After the completion of this program, participants will be able to:
Principles 1.Understandable of the basic principle of GSM and GPRS technology 2.Familiar with GSM system architecture and the wireless network interface Product knowledge 1.Master BSC6900 (GSM) system overview, hardware architecture and product specifications 2.Master BTS3900/DBS3900 (GSM) hardware architecture and module functions 3.Master typical configuration of BTS3900/DBS3900 (GSM) 4.Master BTS3900/DBS3900 (MBTS) hardware architecture and module functions
Duration
11 working days
12.2
COMMERCIAL IN CONFIDENCE
32
2.Understandable of M2000 system architecture and Huawei Certified Network Professional-Huawei GSM Technologies and Device Lecture, Hands-on exercise 14 d master the operation of client Software Commissioning 1.Capable of independently finishing data configuration of site controller and site through WebLMT and CME 2.Master the software commissioning approaches of the controller 3.Capable of independently finishing new site integration through M2000 Acceptance testing 1.Master the acceptance approaches of controller Software Upgrade 1.Master the local upgrade approaches of the site Be familiar with the Windows operating system. Know basic functions of the computer network. 2.Master the remote upgrade approaches of the site Maintenance and troubleshooting 1.Master the controller operation& maintenance approaches 2.Capable of independently dealing with hardware replacement and information collection of controller 3.Capable of independently dealing with controller problems and emergency recovery on-site 4. Capable of independently finishing network inspection through NIC and OMSTAR tools
Target Audience
This training program is intended for those who are to take the HCNP certification exam and those who hope to learn about basic GSM principles and Huawei GSM equipment.
Prerequisites
Objectives Compare with Huawei Certified Network Associate-Huawei GSM Technologies and Device Training, the objectives added are shown as follows. After the completion of this program, participants will be able to:
Principles 1.Understandable of the signaling process of GSM system Product knowledge 1.Master CME configuration tool principles and operational guidance
Duration
14 working days
13 WCDMA
13.1 Huawei Certified Network Associate-Huawei WCDMA
Prerequisites
Be familiar with the Windows operating system.
COMMERCIAL IN CONFIDENCE
33
Complete installation design of site Complete hardware installation of site controller Complete hardware installation of site (including feeder system, monitoring, and other peripherals) Complete remote/local commissioning of the site Complete site integration Complete site service testing Perform testing tool and testing indicators Hardware installation check Acceptance of a single-site (including service testing) Hardware Replacement Information collection Deal with problems on site On-site emergency recovery
Objectives
After the completion of this program, participants will be able to: Describe the basic principle of WCDMA technology Describe WCDMA system architecture and the wireless network interface Describe BSC6900 (WCDMA) system , hardware architecture and product specifications Describe BTS3900/DBS3900 (WCDMA) hardware architecture and module functions Outline typical configuration of BTS3900/DBS3900 (WCDMA) Describe BTS3900/DBS3900 (MBTS) hardware architecture and module functions Outline typical configuration of BTS3900/DBS3900 (MBTS) Complete engineering survey of site controller Complete engineering survey of site Complete installation design of site controller
Duration
9 working days
13.2
Objectives
After the completion of this program, participants will be able to: Describe WCDMA wireless network architecture Describe the signaling process of the WCDMA system Describe BTS3900/DBS3900 (MBTS) hardware Describe BTS3900/DBS3900 (MBTS) architecture and module functions Outline typical configuration of BTS3900/DBS3900 (MBTS)
Target Audience
This training program is intended for those who are to take the HCNP certification exam and those who hope to learn about basic WCDMA principles and Huawei WCDMA equipment.
COMMERCIAL IN CONFIDENCE
34
Outline CME configuration tool principles and platform Outline CME configuration tool operation Outline the M2000 system architecture and operation Outline function of the M2000 system Perform data configuration for site Perform data configuration for site controller Complete the process of site data configuration Complete the process of site controller data configuration Perform software commissioning of the controller Describe the process of software commissioning Perform new site integration through M2000 Describe the process of new site integration Describe the process of remote upgrade of the site
Describe the process of local upgrade of the site Complete remote upgrade of the site Complete local upgrade of the site Complete hardware replacement Complete Information collection for controller Deal with problems on site for controller Complete On-site emergency recovery for controller
Duration
13 working days
14 CDMA
14.1 Huawei Certified Network Associate-Huawei CDMA Technologies
Target Audience
This training program is intended for those who are to take the HCNA certification exam and those who hope to learn about basic CDMA principles and Huawei CDMA equipment.
Prerequisites
Objectives
COMMERCIAL IN CONFIDENCE
35
understanding Huawei BOQ and the meaning of the packing list; 7.controller and base station hardware installation and the Power On Self Test; Data configuration and commissioning Acceptance Test (1 day) 1.the BTS hardware installation quality inspection content and standards; 2.Grasp the power meter, sitemaster ,test terminal use method; Chinese Edition adds the following: 1.the BSC hardware installation quality inspection content and standards; Maintenance and Troubleshooting (1day)
1.Grasp the replacement method and operation procedure of BSC6680/BSC6600/RAC6610/MSE9830 boardframe etc. 2.Grasp the replacement method and operation procedure of BTS36xx/39xx serial bts boardBBU etc.
Duration
77.5 working days no practice
COMMERCIAL IN CONFIDENCE
36
14.2
Target Audience
This training program is intended for those who are to take the HCNP certification exam and those who hope to learn about basic CDMA principles and Huawei CDMA equipment.
Prerequisites
Objectives
Principles (1.5 days +1 day) 1.cdma2000 1X & 1xEV-DO basic technology (CDMA technology development road signpostf cdma2000 1X/1xEV-DO technical characteristics and network structure, key technology of cdma2000 1X and UM channel IntroductionEVDO new technologies and UM channel Introduction) ; 2.the technical characteristics and network architecture of the the Trustar digital trunking communication system ; 3.Grasp transmission fundamentals (TCPIP protocol and subnetting, Ethernet / VLAN / VRRP / Routing
COMMERCIAL IN CONFIDENCE
37
2.the BTS data configuration; 3.the BTS basic commissioning procedure; 4.the meaning of the BTS of the Engineering Indicators (VSWR, RSSIoutput power) and test methodsFinish the BTS troubleshooting and quality inspection under the guidance. ; 5.the BTS environment alarm configuration, debugging; 6.IP RAN network form and IPRAN BTS data configuration; Chinese Edition adds the following (2 days + 2 days) 1.BSC6680 controller internal signals (signaling, traffic) processes procedure, the basic rules of the system configuration; 2.Operation and maintenance system of BSC6680 (CDMA BSC6680 maintenance system agencies, system networking, maintenance system software structure, the internal IP network, IP address planning) ; 3.BSC6680 data configuration (the basic configuration of BSC6680 system,, the file loading procedure, the CDMA BSC6680 hardware, clock, interface, cell, carrier, and cdma2000 1X/1xEV-DO business data configuration) ; 4.BSC6680 signaling procedure(voice, data services, short message, handoff signaling process) ; 5.the BSC data configuration under IP RAN network; Acceptance Test (1 day+ 0.5 days) 1.the BTS hardware installation quality inspection content and standards; 2.the BTS software installation quality inspection content and standards; 3.the LMT maintenance method of RSSI,VSWR, Transmit power tracing; 4.Single BTS acceptance range and standard; 5.Grasp the power meter, sitemaster ,test terminal use method;
6.the acceptance range and standard of BTS basic characteristics; Chinese Edition adds the following: (1 day+0.5 days) 1.the BSC hardware installation quality inspection content and standards; 2.the BSC software installation quality inspection content and standards; 3, the LMT maintenance method of signal tracing; 4,Single BSC acceptance range and standard; 5, the acceptance range and standard of BSC basic characteristics; Maintenance and Troubleshooting (2 days + 0.5 day) 1.Grasp the replacement method of spare parts, clear procedure key points; 2.Familiar with some of the commonly used test tools (sitemaster, power meter, test phone, etc.) 3.Familiar with the daily operation &maintenance of the 36xx/39xx Series BTS and RAC6610/BSC6600/BSC6680 ,basic information collection methods, analysis and process the common fault alarm base on online help; 4.Grasp MSE9830 board replacement methods, procedure and information collection methods; 5.To understand the common fault scenarios of the 36xx/39xx Series bts, to grasp the emergency fault information collection and recovery measures, quickly recovery according the guidance; 6.the use method of FMA tools
Duration
13.5~16 working days no practice
COMMERCIAL IN CONFIDENCE
38
15 Wimax
15.1 Huawei Certified Network Professional-Huawei Wimax
Target Audience
This training program is intended for those who are to take the Wimax certification exam and those who hope to learn about basic Wimax principles and Huawei Wimax equipment.
Prerequisites
Objectives
After the completion of this program, participants will be able to: Describe OFDM/OFDMA Basics Describe WiMAX Features Describe WiMAX Applications Describe WiMAX system networking Outline each board function of DBS3900 WiMAX Complete the inside connection of DBS3900 State the typical networking configuration Describe WiMAX system networking
Duration
8 workdays
COMMERCIAL IN CONFIDENCE
39
16 GSM RNP&RNO
16.1 Huawei Certified Network Associate- Huawei GSM RNP&RNO
Target Audience
Prerequisites
Skilled in windows operating system. Capable of describing the basic functions of computer network. Skilled in using business softwares like office and outlook. Capable of describing the basic functions of mobile communication.
Objectives
Principle Understandable of the GSM basic theories /wireless transmission /telecomunicatios as well as attenna and associated parameters.
Duration
7 workdays
COMMERCIAL IN CONFIDENCE
40
16.2
parameters design and GPRS planning. Master the related parameters and adjusting regulations of Network Design. Master the way of CW testing and related data processing. Master the corrective procedure of transmission model. Optimization knowledges Master the RF optimazition & procedure, methods and tools, capable of processing GSM radio network RF optimazition. Master the definition of traffic statistics and counter point in the wireless side of GSM Network. Master GSM common KPI analysis and network problem solution, such as drop call, handover, voice quality and data traffic. Capable of independently completing network optimazition reports and generating problem analysis reports.
Lecture,Hands-on
8d
Target Audience
exercise
This training program is intended for those who are to take the HCNP GSM RNP&RNO certification exam.
Prerequisites
Skilled in windows operating system. Skilled in using business softwares like office and outlook . Capable of describing the basic functions of mobile communication. Have qualifications for HCNA-Huawei GSM RNP&RNO Technologies.
Objectives
Principle Familiar with GSM communication theory. Master wireless network planning and optimazition process. Planning knowledges
Duration
8workdays
COMMERCIAL IN CONFIDENCE
41
17 WCDMA RNP&RNO
17.1 Huawei Certified Network Associate-WCDMA RNP&RNO Training
Outline
Training Mode
Familiar with the theory of radio propagation and common propagation models. Huawei Certified Network Associate-WCDMA RNP&RNO Training Lecture,Hands-on 7d Optimization knowledges Independent output electromagnetic interference analysis, and existence of the interference region is given a preliminary settlement proposals. Be able to independently asked to complete the site investigation and reporting. This training program is intended for those who are to take the Huawei Certified Network Associate-WCDMA RNP&RNO certification exam. Be able to use the tools to verify the wireless working parameters and the quality of the antenna and cable correction. Be able to independently use the Genex Probe, completion of DT / CQT testing (including single-station verification), Genex Assistant analysis of the problem in the DT / CQT, the output of the corresponding solutions. Deal with general customer complaints by DT / CQT. Grasp the road test KPI the meaning and the testing method, independent production test program and complete. Principle Understandable of the WCDMA basic theories, wireless transmission, telecomunicatios, attenna and associated parameters. Planning knowledges Master antenna selection. Initial grasp of network planning and optimization process, familiar with the site survey, RF Tuning process. 7 workdays Master the cell parameters to verify the method, familiar with the meaning of the parameters and adjust the basis of the common network rules.
Target Audience
exercise
Prerequisites
Skilled in windows operating system. Skilled in using business softwares like office and outlook. Capable of describing the basic functions of mobile communication.
Objectives
Duration
17.2
Training Outline
COMMERCIAL IN CONFIDENCE
42
Training Mode
Huawei Certified Network Professional-WCDMA RNP&RNO Training
and neighbor / frequency planning, LAC planning, scrambling code planning. Grasp the relevant parameters of the network planning and adjustment of principles. 11 d Grasp the CW test method, the CW test data processing. Master the propagation model calibration processes, methods. Optimization knowledges Master the RF optimization of processes, methods, tools, with network RF optimization capabilities. Master the definition of traffic statistics and counter point in the wireless side of GSM Network. To master the problems of the common words of WCDMA system KPI analysis and network processing, familiar, then the system KPIs (Access, retention and mobility)optimization method. Familiar with Huawei UMTS RNC maintenance operations. Able to independently finish the network optimization reporting and problem analysis report writing.
Lecture,Hands-on
Target Audience
exercise
This training program is intended for those who are to take the Huawei Certified Network Professional-WCDMA RNP&RNO certification exam.
Prerequisites
Skilled in windows operating system. Skilled in using business softwares like office and outlook. Capable of describing the basic functions of mobile communication. Have qualifications for HCNA-Huawei WCDMA RNP&RNO Technologies.
Objectives
Principle Familiar with the WCDMA communication theory. Master the wireless network planning and optimization process. Planning knowledges Master the UMTS coverage planning, capacity planning,
Duration
11workdays
18 CDMA RNP&RNO
18.1 Huawei Certified Network Associate-Huawei CDMA RNP&RNO
COMMERCIAL IN CONFIDENCE
43
Training Mode
Huawei Certified Network Associate-Huawei CDMA RNP&RNO TechnologiesTraining Lecture,Hands-on 8d
Familiar with radio transmission theoretics and the usual transmission model. Optimization knowledges Capable of independently writing the analysis of electromagnetic interference, and providing preliminary resolutions for the target area accordingly. Capable of independently finishing site survey and report upon request. Capable of independently using related tools to survey radio parameters and quality of antenna. Capable of independently accomplishing DT/CQT test(single site verification) by Pioneer, analyzing the problems of DT/CQT by Navigator and deliver resolutions accordingly Capable of dealing with common customers complaint by DT/CQT. Familiar with the meaning and adjusting regulations of commonly used Network Design parameters. exercise
Target Audience
This training program is intended for those who are to take the HCNA CDMA RNP&RNO certification exam.
Prerequisites
Skilled in windows operating system. Skilled in using business softwares like office and outlook. Capable of describing the basic functions of mobile communication.
Objectives
Principle Understandable of the CDMA basic theories /wireless transmission /telecomunicatios as well as attenna and associated parameters. Planning knowledges
Duration
8 workdays
18.2
COMMERCIAL IN CONFIDENCE
44
Training Mode
Huawei Certified Network Professional-Huawei CDMA RNP&RNO Technologies Training
Master the Network structure of multi-trxs , familiar with the theories of PN, LAC and Neighbour design. Master the way of CW testing and related data processing. 8d Master the corrective procedure of transmission model. Master the related parameters and adjusting regulations of Network Design. Optimization knowledges Master the RF optimazition & procedure, methods and tools, capable of processing GSM radio network RF optimazition. Master the definition of traffic statistics and counter point in the wireless side of CDMA Network. Master CDMA common KPI analysis and network problem solution, such as drop call, handover, voice quality and data traffic . Familiar with operating on HUA WEI CDMA BSCs flatform; Capable of independently completing network optimazition reports and generating problem analysis reports.
Lecture,Hands-on
Target Audience
exercise
This training program is intended for those who are to take the HCNP CDMA RNP&RNO certification exam.
Prerequisites
Skilled in windows operating system. Skilled in using business softwares like office and outlook . Capable of describing the basic functions of mobile communication. Have qualifications for HCNA-Huawei CDMA RNP&RNO Technologies.
Objectives
Principle Familiar with CDMA communication theory. Master wireless network planning and optimazition process. Planning knowledges Master the elements which impact on coverage and capacity. Familiar with the basic principle of power configuration.
Duration
8 workdays
COMMERCIAL IN CONFIDENCE
45
19 Microwave RNP
19.1 Huawei Certified Network Associate-Huawei Microwave RNP
Target Audience
Duration
3 Working days
Prerequisites
Be familiar with the Windows operating system. Know basic functions of the computer network.
Objectives
After the completion of this program, participants
COMMERCIAL IN CONFIDENCE
46
19.2
Target Audience
Prerequisites
Be familiar with the Windows operating system. Know basic functions of the computer network. With hardware installation and commissioning experience of Microwave or optical Knowledge about Microwave telecom common principle.
Duration
3 Working days
Objectives
After the completion of this program, participants
COMMERCIAL IN CONFIDENCE
47
Target Audience
This training program is intended for those who are to take the Site and Power System certification exam and those who hope to learn about basic ITS1000M and Power3000 principles and Huawei ITS1000M and Power3000 equipment.
Prerequisites
Having working experience in the operation and maintenance of Power3000. Be familiar with Battery group.
Duration
9 workdays
Objectives
After the completion of this program, participants will be able to:
COMMERCIAL IN CONFIDENCE
48
Target Audience
This training program is intended for those who are to take the Hybrid Power Supply certification exam and those who hope to learn about basic Power1000 and Power2000 principles and Huawei Power1000 and Power2000 equipment.
Prerequisites
Duration
Objectives
After the completion of this program, participants will be able to:
Entrance Requirements
Huawei hardware installation personnel and Huawei hardware installation sub-contractors Dedicated personnel with basic electronic knowledge and electrician skills
Trainees
drills
Personnel who attend the certification test of hardware installation for Huawei telecom equipment Personnel who hope to know more about hardware maintenance and troubleshooting of Huawei equipment
Objectives
Upon completion of this training program, the trainees will understand the following subjects: Introduction to EHS management during engineering delivery Telecom installation specifications
COMMERCIAL IN CONFIDENCE
49
Specifications on common tools and wireless products installation Required knowledge about installability User guide for common tools of communication project MA5600 hardware installation guide SOP of OptiX OSN 3500 Guide to core network UMG8900 cabinet cascaded optical fiber installation (2008.05.20) Core network hardware installation training material
Duration
Five routine working days
Entrance Requirements
Huawei hardware installation personnel and Huawei hardware installation sub-contractors Dedicated personnel with basic electronic knowledge and electrician skills
Trainees
Personnel who attend the certification test of hardware installation for Huawei telecom equipment Personnel who hope to know more about hardware maintenance and troubleshooting of
Contents
Upon completion of this training program, the trainees will understand the following subjects: Introduction to EHS management during engineering delivery
COMMERCIAL IN CONFIDENCE
50
Introduction to telecommunications room environment Telecom installation specifications Specifications on common tools and wireless products installation Required knowledge about installability Introduction to common instruments and tools BTS3900 hardware architecture and principle DBS3900 hardware architecture and principle Antenna and feeder system installation (Chinese video) Quick installation guide to base station swap V1.0 Multimedia training material of tower installation Specifications on installing and laying out cables
Training materials for making cable connectors (outdoor) Microwave product installation and commissioning (training material for international projects) Work instructions for the delivery of microwave co-base stations (training material for international projects)
Duration
Six routine working days
COMMERCIAL IN CONFIDENCE
51