Anda di halaman 1dari 60

BOP Replacement Parts Catalog

Cameron Total Drilling Systems

Riser
System

Stack
System

SD5211-96

SD11600-96

Cameron Land Drilling System

Cameron Subsea Drilling System

Cameron has a focused drilling organization which is dedicated to meeting


the changing needs of our customers. One of the ways we accomplish
this is by providing total systems for land and subsea drilling including BOP
stacks, complete choke manifold systems, riser systems and high technology
control systems.

designed and manufactured to provide safety, reliability and convenience to


the operator.

BOP Stack Systems


Cameron ram-type BOPs, annular BOPs and gate valves can meet the
most basic land drilling needs as well as critical, weight sensitive, harsh
environmental platform requirements. Components in Camerons subsea
BOP stack systems, ram-type BOPs, annular BOPs, gate valves and BOP
stack structures incorporate years of field-proven technology and reliability.
Choke Manifold Systems
Cameron supplies all necessary components for a choke manifold including
manual and hydraulic chokes, and H2 chokes, J-2 transmitters, pressure
gauges, check valves, buffer tanks and all connecting equipment required
to assemble the choke manifold. All Cameron choke manifold equipment is

Riser Systems
Cameron riser system components, spider/gimbal, telescoping joint, RST
ring, fill-up valve, RF and RD riser joints, termination spool and flex joint are
designed to meet the stringent requirements for drilling in deep water.
Control Systems
Cameron offers a complete hydraulic control system as well as a multiplex
control system for subsea drilling applications. Cameron supplies all the
components required for choke control systems as well as all of the components used to control the BOP stack and associated equipment. For land
applications, Camerons pump accumulator unit and remote control panels
are designed to customer specifications. All of our components offer fieldproven reliability and high quality, dependable components.
For more information on complete Cameron drilling systems, contact your
local Cameron representative or visit our web site (http//camerondiv.com).

Cameron
BOP Replacement Parts Catalog
Cameron provides all of the OEM products and services necessary to maintain the full range of Cameron drilling products. This catalog contains
information on our worldwide network of aftermarket facilities as well as detailed information on the replacement parts necessary for the following
Cameron products:
U BOP

TL BOP

DL Annular BOP

UII BOP

UL BOP

S/QRC Snubbing BOP

T BOP

D Annular BOP

G-2 Snubbing BOP

The Cameron BOP Replacement Parts Catalog, along with the 1996-1997 Cameron General Catalog, is also available on CD ROM. The electronic
version of the catalog provides easy-to-use, interactive information on all Cameron products. The CD ROM is compatible with MacIntosh and
Windows 3.1 and Windows 95 systems. To obtain a copy the CD ROM, contact your Cameron representative or follow the How to Order
instructions below.

How to Order the Cameron General Catalog:


By Fax:

(713) 939-2735

By Mail:

Cameron Technical Communications


P.O. Box 1212
Houston TX 77251-1212

Request TC1179 Cameron 1996 - 1997 Cameron Catalog CD ROM


Be sure to submit your request on company letterhead and include
your name, title, company name, full address, telephone number, fax
number and number of copies of the CD required.
For additional information on Cameron products, be sure to visit our web site (http://www.cameron div.com).

Contents
Page

Page

U II BOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
U II BOP Hydraulic Control System . . . . . . . . . . . . . . . . . . . . . . . . 29
U II Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
U II BOP Part Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
U II BOP Pipe Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
U II BOP Variable Bore Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
U II BOP Shearing Blind Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
CAMRAM 350 Packers and Top Seals for U II BOPs . . . . . . . . . . . 32
T BOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
T BOP Hydraulic Control System . . . . . . . . . . . . . . . . . . . . . . . . . . 34
T BOP Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
T BOP Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
T BOP Part Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
13-5/8 10,000 psi WP Components. . . . . . . . . . . . . . . . . . . . . 36
13-5/8 10,000 psi WP Bonnet Subassembly . . . . . . . . . . . . . . 37
18-3/4 15,000 psi WP Components. . . . . . . . . . . . . . . . . . . . . 38
18-3/4 15,000 psi WP Bonnet Subassembly. . . . . . . . . . . . . . 39
T BOP Pipe Rams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
T BOP CAMRAM 350 Packers and Top Seals for T BOP . . . . . . . . 40
T BOP Shearing Blind Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
T BOP Variable Bore Rams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
TL BOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
TL BOP Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
TL BOP Dimensions, Weights and Components . . . . . . . . 43
UL BOP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
UL BOP Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
UM BOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
DL BOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
D and DL Annular BOP Dimensions, Weights and Components . . 47
D and DL Annular BOP Part Numbers . . . . . . . . . . . . . . . . . . . . . . 48
7-1/16 3000 - 11 15,000 psi WP . . . . . . . . . . . . . . . . . . . . . . 48
13-5/8 - 21-1/4 2000 psi WP . . . . . . . . . . . . . . . . . . . . . . . . . 49
D and DL Annular BOP Replacement Part Kits . . . . . . . . . . . . . . . . 50
S/QRC and G-2 Snubbing/Workover BOPs . . . . . . . . . . . . . . 51
S/QRC and G-2 BOP Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Clamp Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Manufacturing and Aftermarket Locations
(Addresses, Telephone and Fax Numbers)
Western Hemisphere . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Eastern Hemisphere. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Asia Pacific . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Middle East . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Sales Offices
(Addresses, Telephone and Fax Numbers)
Western Hemisphere . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Eastern Hemisphere. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Asia Pacific . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Middle East . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Cameron Aftermarket Capabilities . . . . . . . . . . . . . . . . . . . . . . . . 3


Total Vendor Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Spare Parts Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
RGR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BOP Exchange Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Cameron Aftermarket Facilities . . . . . . . . . . . . . . . . . . . . . . . 4
Western Hemisphere . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Patterson, Louisiana, USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Liberty, Texas, USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Anchorage, Alaska, USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Oklahoma CIty, Oklahoma, USA. . . . . . . . . . . . . . . . . . . . . . . . . . 4
Veracruz, Mexico . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Zarate, Argentina . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Edmonton, Alberta, Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Eastern Hemisphere . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Aberdeen, Scotland . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Stavanger, Norway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Hoogezand, The Netherlands . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Port Harcourt, Nigeria . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Asia Pacific and Middle East . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Singapore. Republic of Singapore . . . . . . . . . . . . . . . . . . . . . . . . 5
Melbourne, Victoria, Australia . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Cameron Elastomer Technology . . . . . . . . . . . . . . . . . . . . . . . . . . 6
CAMRAM Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
CAMRAM FAtigue Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
CAMRAM 350 Products. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
CAMRAM 350 Field Testing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
CAMRAM Lipped Plate Design . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Rams for Ram-Type Blowout Preventers . . . . . . . . . . . . . . . . . 10
Comparison of Cameron Ram-Type Blowout Preventers. . . . 11
U BOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
U BOP Hydraulic Control System. . . . . . . . . . . . . . . . . . . . . . . . . . 13
U BOP Specifications and Accessories. . . . . . . . . . . . . . . . . . . . . . 14
U BOP Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
U BOP Part Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
7-1/16 3000 - 11 10,000 psi WP . . . . . . . . . . . . . . . . . . . . . . 16
11 15,000 - 16-3/4 5000 psi WP . . . . . . . . . . . . . . . . . . . . . . 17
16-3/4 10,000 - 26-3/4 3000 psi WP . . . . . . . . . . . . . . . . . . 18
Large Bore Shear Bonnets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Tandem Boosters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
U and U II BOP Ram Hang-Off Weights . . . . . . . . . . . . . . . . . . . . . 20
Drill Pipe Shearing Requirements . . . . . . . . . . . . . . . . . . . . . . . . . 20
U BOP Pipe Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
7-1/16 - 13-5/8 10,000 psi WP . . . . . . . . . . . . . . . . . . . . . . . 21
13-5/8 15,000 - 26-3/4 2000 and 3000 psi WP . . . . . . . . . . . 22
U BOP Shearing Blind Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
U BOP DSI and DVS Rams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
U BOP Variable Bore Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
FLEXPACKERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
CAMRAM 350 Packers and Top Seals . . . . . . . . . . . . . . . . . . . . 25
U BOP Rams for Multiple Completions . . . . . . . . . . . . . . . . . . . . . 26
Bonnet Rebuild Softgoods Kits for U BOP . . . . . . . . . . . . . . . . . . . 26
Hydraulic Bonnet Bolt System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Bonnet Seals, and Connecting Rod Seals. . . . . . . . . . . . . . . . . . . . 27
Bonnet Seal Carriers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

CAMRAM, CAMRAM 350, CAMULAR, CAMLAST and FLEXPACKER are


trademarks of Cooper Cameron Corporation

Cameron Aftermarket Capabilities


TVM is not just a repair program, It is a comprehensive package of services
to the drilling contractor. Through TVM, Cameron customers have a way to
drive down drilling costs and be more competitive. In addition, TVM provides
the customer with a single point of contact for equipment sales, repair and remanufacturing and exchange.

In any area of the world where Cameron drilling products are used, Cameron
aftermarket and repair facilities are ready to respond with the most
comprehensive network of aftermarket products and services available in the
industry. Each of our facilities is strategically located to meet the exact needs of
the customers in the area. Yet all of the facilities benefit from our expertise and
worldwide communications network which links all facilities through an
electronic communication system and ensures instantaneous access to
information. Cameron aftermarket services include: total vendor management
(TVM), spare parts inventory, repair refurbishment (RGR), BOP exchange
program, field service

Spare Parts Inventory


Cameron is committed to providing off-the-shelf delivery of spare parts in
any location worldwide. By using genuine Cameron replacement parts,
customers are guaranteed to receive the same quality and performance as when
the product was new. To meet these needs, Cameron has established four
worldwide stocking locations to better meet delivery requirements. Elastomers
and frequently requested metal components are stocked in a temperaturecontrolled warehouse in Katy, Texas; Aberdeen, Scotland; Singapore
and Abu Dhabi.

Total Vendor Management


The TVM concept reflects a new relationship between equipment suppliers
and drilling contractors by making cost efficiency of primary importance to both
sides. The traditional seller-buyer adversarial roles are eliminated, in effect
making the customer and supplier partners in cutting costs.
Cameron understands this process and has more experience in successful
TVM programs than anyone else in the industry. With the development of this
type of long-term agreement, Cameron and the customer work together to
reduce the costs associated with the design, manufacture, delivery, installation
and operation of equipment required for the drilling project. TVM contract
options may include:
New equipment manufacture.
Field maintenance.
Off-the-shelf delivery of spare and replacement parts.
Repair and refurbishment of used and worn equipment.
Used equipment exchange program
Re-manufactured products
Inventory management and storage of customer property.

RGR
Camerons focus on aftermarket services includes a complete RGR program.
Cameron will repair equipment to customer specifications - fit for purpose, with
a reasonable price and quick delivery. Camerons RGR goal is to receive the
equipment and do whatever is necessary to get it back in the field as quickly as
possible. In addition, Cameron has embarked on a detailed engineering study
to take as much time and money out of our RGR processes as possible while
still maintaining the quality customers expect from Cameron drilling products.
Camerons RGR program also includes the option of retrofitting BOPs with
some of the features of more current BOP designs such as bonnet seal carriers,
large bore shear ram bonnets and tandem boosters.

BOP Exchange Program


For those customers looking for an economical alternative to buying new
equipment or in situations where a BOP cannot be removed from service for the
time required to make the repair, Cameron offers a BOP exchange program.
For this program, Cameron maintains an inventory of remanufactured BOPs
that met API 6A, 14th edition NACE MR-01-75 restored to like-new condition
with a full one-year warranty. Customers can trade their used BOPs in
exchange for a remanufactured BOP. Cameron also offers remanufactured
BOPs for sale without an exchange.

Remanufactured BOPs and BOP Accessories Availability Chart


Bore
Size

A BOP body is refurbished at Camerons Stavanger, Norway facility


3

Working
Pressure

7-1/16

5000

7-1/16

10,000

11

5000

11

10,000

11

15,000

13-5/8

5000

13-5/8

10,000

16-3/4

5000

16-3/4

10,000

18-3/4

15,000

18-3/4

10,000

20-3/4

3000

BOPs

Large Bore
Shear
Bonnets

Rams

Tandem
Boosters

(Small Bore)

Bonnet
Seal
Carrier

Western Hemisphere Aftermarket Locations

Patterson, Louisiana, USA


Dedicated aftermarket facility with manufacturing support. Services include: Assembly,
Marine Stack and Tree Assembly, Hydro Testing, Gas Testing, Welding, Cladding,
Post Weld Heat Treat, Machining, Inspection, Blast and Paint, Customer Property Storage.

Liberty, Texas, USA


Dedicated aftermarket facility with
manufacturing support. Services include: Assembly, Hydro Testing, Gas Testing, Welding,
Cladding, Post Weld Heat Treat, Machining, Inspection, Blast and Paint, Customer
Property Storage.

Anchorage, Alaska, USA


Dedicated aftermarket facility with
manufacturing support. Services include: Assembly, Hydro Testing, Welding,
Post Weld Heat Treat, Machining, Inspection, Blast and Paint, Customer Property Storage.

Oklahoma City, Oklahoma, USA


Field service warehouse performing product
repair/remanufacture outside the scope of typical field service repairs.
Services include: Assembly, Hydro Testing, Gas Testing, Welding, Post Weld Heat Treat,
Machining, Blast and Paint, Customer Property Storage.

Veracruz, Mexico
Dedicated aftermarket facility with
manufacturing support. Services include: Assembly, Hydro Testing, Welding,
Post Weld Heat Treat, Inhouse Heat Treat, Machining, Inspection, Blast and Paint,
Customer Property Storage.

Zrate, Argentina
Dedicated manufacturing facility with aftermarket support. Services include:
Assembly, Hydro Testing, Gas Testing, Welding, Post Weld Heat Treat,
Inhouse Heat Treat, Machining, Inspection, Blast and Paint, Customer Property Storage.

Edmonton, Alberta, Canada


Dedicated manufacturing facility with
aftermarket support. Services include:
Assembly, Hydro Testing, Welding, Post Weld Heat Treat, Machining, Inspection,
Blast and Paint, Customer Property Storage.

Eastern Hemisphere Aftermarket Locations

Aberdeen, Scotland
Dedicated aftermarket facility with manufacturing support. Services include:
Assembly, Marine Stack and Tree Assembly, Hydro Testing, Gas Testing, Welding, Cladding,
Post Weld Heat Treat, Machining, Inspection, Blast and Paint, Customer Property Storage.

Stavanger, Norway
Dedicated aftermarket facility with
manufacturing support. Services include:Assembly, Marine Stack and Tree Assembly,
Hydro Testing, Gas Testing, Welding, Cladding, Post Weld Heat Treat, Machining,
Inspection, Blast and Paint, Customer Property Storage.

Hoogezand, The Netherlands


Field service warehouse performing
product repair/remanufacture outside the scope of typical field service repairs.
Services include: Assembly, Hydro Testing, Inspection, Blast and Paint,
Customer Property Storage.

Port Harcourt, Nigeria


Field service warehouse performing product
repair/remanufacture outside the scope of typical field service repairs. Services include:
Assembly, Hydro Testing, Inspection, Gas Testing, Blast and Paint, Customer Property Storage.

Asia Pacific and Middle East Aftermarket Locations

Singapore, Republic of Singapore


Dedicated manufacturing facility with aftermarket support. Services include:
Assembly, Hydro Testing, Gas Testing, Welding, Cladding, Post Weld Heat Treat,
Inhouse Heat Treat, Machining, Inspection, Blast and Paint, Customer Property Storage.

Melbourne, Victoria, Australia


Field service warehouse performing
product repair/remanufacture outside the scope of typical field service repairs.
Services include: Assembly Marine Trees, Hydro Testing, Gas Testing, Welding, Stress
Relieve, Wet Test Pit, Machining, Inspection, Blast and Paint, Customer Property Storage.

Cameron Elastomer Technology


CET's facilities provide "life prediction" and immersion testing. The lifeprediction testing is based on the Arrhenius principle of thermochemical
reactions. Elevated temperatures are used to accelerate the thermochemical
degradation of elastomer materials.
Cameron employees are experts in elastomer technology and can take an
idea from the testing phase through full product development.
Today, there is a family of elastomer products specially formulated and
designed to meet the rigorous demands of the oilfield. These products, when
used in Cameron T, U II, and U ram and D annular BOPs, improve performance,
extend service life, reduce downtime, and lower operating costs.
CAMRAM, CAMRAM 350, CAMULAR and CAMLAST elastomers
have set new standards in performance. Each is uniquely Cameron, including
design and manufacturing. Behind each product is the absolute commitment to
quality, performance and support that the industry has come to recognize as
hallmarks of Cameron.
An integral part of CETs Katy facility is a temperature controlled elastomer
warehouse. CET manufactured elastomer products and critical drilling metal
spares are readily available to meet customer requirements.

From its Katy facility west of Houston, Texas, Cameron Elastomer


Technology provides engineered solutions to elastomeric material problems.
State-of-the-art research, including associated mechanical design and
engineering, is conducted at this totally integrated manufacturing facility.
The 72,000-sq-ft plant is designed to support Cameron Division's elastomer
components and develop new products to meet the most stringent operating
and environmental conditions.
Cameron Elastomer Technology (CET) has extensive process development
capability supported by continuing research, a comprehensive testing laboratory
and engineering capability. These are combined to provide effective support for
the manufacturing of an extensive line of high-performance elastomer products.
CET offers molded products utilizing compression, transfer and injection
molding techniques. Critical molded products are qualification-tested prior to
release for production.
Cold chambers and ovens are available for testing elastomers in temperature
extremes ranging from -150F to 700F. Precise temperature control allows for
exposure of elastomer components to conditions that simulate the actual service
environment.

SD-10861-96

SD-10810-96

Special equipment performs high temperature evaluation of ram packers.

The CET facility produces a wide variety of elastomers components.

SD-24101-96

SD-10813-96

Cameron Elastomer Technology plant, Katy, Texas

A ram-type packer is removed from an injection molding press.

CAMRAM Products
CAMRAM packers and top seals are designed specifically for Cameron ram
BOPs. These new elastomer products from Cameron Elastomer Technology last
longer and provide increased margins of safety in severe drilling environments
than do look-alike replacement parts. Thats under all conditions high
temperatures, diesel mud and heavy stripping. CAMRAM long-life packers
mean fewer problems, less downtime and better overall performance.

Diesel Mud Resistant


CAMRAM packers provide high resistance to diesel drilling muds. In field
service, CAMRAM packers have performed as well in high-temperature mud
conditions as conventional packers perform dry at room temperature.

Superior Stripping/Snubbing Performance


The superior elastomer material, in combination with the lipped-plate
design, reduce seal extrusion and wear in stripping and snubbing service.
In fact, CAMRAM packers have demonstrated a stripping capability at least
three times greater than conventional packers.

CAMRAM Characteristics
Higher Temperature Capability

Extreme High Temperature Capability

CAMRAM packers made with high-temperature nitrile rubber provide a 50F


increase in the service temperature of the BOP in which they are used.
CAMRAM packers have proven successful in 250F sustained service and
have withstood excursions to 300F.

For applications which require higher temperature capabilities than standard


CAMRAM packers, Cameron Elastomer Technology has developed
CAMRAM 350 packers and top seals which are made of CAMLAST.
CAMRAM 350 packers and top seals operate up to 350F. They can be

Why CAMRAMs Rubber Performs Better Than Conventional Packer Rubber


300%

300%
270

CAMRAM Packer Rubber

CAMRAM Packer Rubber

250

Improvement

200

200

200%
170

110
100%

100

100

100

100

100

0%

70F
300F
Tensile Strength

Elongation

Tear
Strength

Abrasion
Resistance

Retained Properties

Conventional Packer Rubber

Conventional Packer Rubber

200%

190

130
100%

0%

100

Tensile
Strength

100

Elongation

100

Rubber
Hardness

Mechanical Properties
70 Hours in 300F Diesel Fluid

Original Mechanical Properties

CAMRAM: Fatigue Tests Prove Performance


CAMRAM has demonstrated its superior performance in a tough series of
fatigue tests conducted during the development phase. In actual field
applications, these test results have been confirmed time after time.
Fatigue Test Conditions
Test
Temperature
Fluid
Pressure
Minimum Acceptable Life

Condition
250F
Mineral-based Hydraulic Oil
10,000 psi
50 Closure and Pressure Cycles
at 250F without Leakage
Fatigue Test Results

Result
Cycles Completed

CAMRAM
50

Packer Condition

Brand A*
1

Brand B*
50

Brand C*
9

Passed Pressure
Failed,
Passed
Failed, Would
Test - OK for
Would Not
Pressure Test,
Not Hold
Continued Use Hold Pressure Failure Imminent Pressure

Seal Area/Material Loss

5%

90%

25%

CAMRAM

40%

Brand A

Brand B

Brand C

Ram Packers after Fatigue Test at 250F

*Brands A, B and C are non-Cameron replacement (bootleg) packers.

SD-10872-96

CAMRAM: Outperforms in Stripping Service


Stripping Test Conditions
Because Cameron Elastomer Technology understands that stripping service
is one of the toughest tests elastomer packers see in field service, CAMRAM
packers were subjected to extensive laboratory stripping tests. The results
proved CAMRAM far superior to non-Cameron replacement packers. And, in
the field, where performance is the true test of the product, CAMRAM has
consistently outperformed other packers.

Condition
Test Temperature
Test Fluid
Bore Pressure
Drill Pipe Size
Stripping Rate

Parameter
120F
Water
1500 psi
5"
20 feet per minute

Stripping Test Results

CAMRAM

47,928

Brand A*

11,980

Brand B*

15,638

Brand C*

2,366

Brand D*

14,168

Brand E*

1,687
0

10

20

30

Feet of Drill Pipe Stripped (x 1000)


*Brands A, B, C, D and E are non-Cameron replacement (bootleg) packers.

40

50

CAMRAM 350 Products


CAMRAM 350 packers and top seals have been in field use since 1985
when they were first used in Puckett, Mississippi to control a gas well
blowout. SInce then, CAMRAM 350 components have continued to prove
reliable and rugged in field service applications.

CAMRAM 350 packers and top seals are made with CAMLAST high
performance elastomer available exclusively from Cameron Elastomer
Technology. In addition, CAMRAM 350 packers have a patented lipped top and
bottom plate design for increased service life. In addition, anti-extrusion wings
have been added to the end of the packer plates to reduce elastomer extrusion at
elevated temperatures. Benefits of CAMRAM 350 include:

The CAMRAM 350 logo molded into all CAMLAST packers and top seals
ensures a genuine quality part from Cameron Elastomer Technology.

CAMRAM 350 packers and top seals operate up to 350 F. Standard


CAMRAM packers operate at temperature up to 250 F which is at least
50 F higher than non-OEM packers and top seals.
CAMRAM 350 packers and top seals can operate in H2S (hydrogen
sulfide) concentrations up to 20% without detrimental effects to
CAMLAST elastomer performance.
CAMRAM 350 is available for all Cameron ram-type BOPs in which
standard CAMRAM is available. It is not an "off-the-shelf" item, but is
readily available on short notice special orders from Cameron Elastomer
Technology.
CAMRAM 350 packers and top seals are more expensive than standard
CAMRAM packers and top seals. However, this is a small price to pay
for the level of performance offered by CAMRAM 350 components in
critical applications.

CAMRAM 350 Packer

CAMRAM 350 Packers and Top Seals Shut-In Well after 43 Days of Exposure to H2S

In actual field test conditions, the CAMRAM 350 16-3/4 x 5-1/2 5000 psi
pipe ram packers and top seals pictured at right, were successfully used to
shut-in a gas well after exposure to natural gas containing 35% H2S at
temperatures of 190 for 43 days. The components show negligible damage
after exposure to the severe conditions experienced in controlling the blowout.
CAMRAM 350 packers and top seals are made with CAMLAST elastomer
and are intended for use to 350F in high H2S concentrations and with water
and/or diesel based drilling mud. CAMLAST elastomer is a proprietary
material made only by Cameron Elastomer Technology in Katy, Texas.
CAMRAM 350 packers and top seals are available on a special order basis
only.
For applicable part numbers and availability, please contact your local
Cameron representative or the Cameron Elastomer warehouse at
(281) 391-4644.
Location
Flowline Temperature
Number of Days Used
Concentration of H2S

CAMRAM 350 16 3/4 top seal after exposure

Rankin County, Mississippi


190F
43 Days
35%

CAMRAM 350 16 3/4 x 5 3/4 packer after exposure

CAMRAM Lipped Plate Design


Because rubber performs best when it is under compression, Cameron's
lipped-plate design provides "rubber in compression" at the wearing surface to
enhance the elastomer mechanical properties as well as the seal. The lipped
plate is unique because it provides stiffness in the wear direction, yet allows
ample feed to the compressed rubber.

Cameron Elastomer Technology's elastomer experts have integrated a


superior elastomer compound into an exclusive lipped-plate packer design that
produces "rubber in compression" at the sealing surface. The design is a
Cameron exclusive and gives the packers improved sealing capabilities and
extended service life.

Upper Plate

Upper Plate

Lower Plate

Wearing Surface

SD-7395

CAMRAM Lipped-Plate Design

Lower Plate

Rubber in Compression

Rams for Ram-Type Blowout Preventers

Cameron offers the most comprehensive line of rams in the industry for its BOPs
including pipe rams, shearing blind rams, and variable bore rams. A selection of
dual string rams are also available to fit specific preventers.
Cameron also offers high quality elastomer products for its rams through

Cameron Elastomer Technology (CET) including high performance products such as


CAMRAM and CAMRAM 350 elastomers for high temperature applications.
These elastomer products are available to fit Cameron BOPs and are standard in
some models and sizes.

Ram Availability Chart


Description
Pipe Rams Available to Fit Standard Pipe Sizes

TL BOP

T BOP

UL BOP

U BOP

U II BOP

Yes

Yes

Yes

Yes

Yes

Variable Bore Rams Available

In Some BOP Sizes

Yes

Yes

Yes

Yes

FLEXPACKER Rams Available

In Some BOP Sizes

No

In Some BOP Sizes

In Some BOP Sizes

In Some BOP Sizes

Shearing Blind Rams Available

In Some BOP Sizes

Yes

Yes

Yes

Yes

DVS Shear Rams Available

In Some BOP Sizes

No

In Some BOP Sizes

In Some BOP Sizes

In Some BOP Sizes

No

No

In Some BOP Sizes

In Some BOP Sizes

No

Grip and Seal Rams Available


CAMRAM Top Seals Standard

Yes

Yes

Yes (through 18-3/4)

Yes (through 18-3/4)

Yes (through 18-3/4)

CAMRAM Packers Standard

Yes

Yes

In Some BOP Sizes

In Some BOP Sizes

In Some BOP Sizes

CAMRAM 350 Packers and Top Seals Available

Yes

Yes

Yes

Yes

Yes

Rams Suitable for H 2S Service

Yes

Yes

Yes

Yes

Yes

Ram Wear Pads Standard

Yes

Yes

No

No

No

10

Comparison of Cameron Ram-Type Blowout Preventers

Regardless of the model, all of the pressure containing components in


Cameron ram-type BOPS are forged to provide added safety and reliability.
These ram-type BOPs are just part of the complete line of Cameron
drilling system products which include annular and workover preventers,
gate valves, controls, subsea riser systems and land and subsea control
systems.
In addition, Cameron offers a complete range of drilling replacement
parts through our worldwide network of aftermarket facilities.

Cameron offers a wide range of ram-type BOPs to meet the dynamic


needs of the drilling industry. The Cameron U BOP was initially designed
for underwater drilling. Today, there are more U BOPs in the field
worldwide than any other ram-type BOP in the industry. As technology and
the needs of the drilling industry changed, Cameron responded by
developing new ram-type BOP designs. Cameron introduced the U II BOP
for subsea applications and has since developed the T BOP and the
lightweight TL and UL models for land and subsea applications.

Comparison of Cameron Ram-Type BOPs


Description

TL BOP

T BOP

UL BOP

U BOP

U II BOP

Surface Applications

Yes

Yes

Yes

Yes

No

Subsea Applications

Yes

Yes

Yes

Yes

Yes

Bore Sizes and Working Pressures


7-1/16

11

13-5/8

16-3/4

18-3/4

3000 psi WP

5000 psi WP

5000 psi WP

10,000 psi WP

10,000 psi WP

15,000 psi WP

15,000 psi WP

3000 psi WP

5000 psi WP

10,000 psi WP

15,000 psi WP

3000 psi WP

5000 psi WP

10,000 psi WP

10,000 psi WP

15,000 psi WP

3000 psi WP

5000 psi WP

10,000 psi WP

5000 psi WP

10,000 psi WP

10,000 psi WP

10,000 psi WP

15,000 psi WP

15,000 psi WP

15,000 psi WP

20-3/4

3000 psi WP

21-1/4

2000 psi WP

5000 psi WP

10,000 psi WP

26-3/4

3000 psi WP

Side Ram Removal

Yes

Yes

No

No

No

Metal-to-Metal Bonnet Gaskets


Hydraulic Stud Tensioning*
Bonnet Seal Carrier

No

Yes

No

No

No

Not Required

Yes

No

Available on large sizes

Yes

Standard

TX Gasket

Available

Available

Available

ST Lock/Wedgelocks

ST Lock

Wedgelocks

Wedgelocks

Wedgelocks

Hydraulically Opening Bonnets

Yes

Yes

Yes

Yes

Yes

Bonnet Studs Instead of Bolts

Yes

Yes

Yes

No

No

Field-Replaceable Bonnet Cylinders, Pistons, Seals

Yes

Yes

Yes

Yes

Yes

Hydromechanical Locking Mechanism

Manufactured in Accordance to NACE

Yes

Yes

Yes

Yes

Yes

Monogrammable to API 16A

Yes

Yes

Yes

Yes

Yes

Body Styles
Single

Yes

Yes

Yes

Yes

Yes

Double

Yes

Yes

Yes

Yes

Yes

Modular

Yes

Yes

No

No

No

API Flange

Yes

Yes

Yes

Yes

Yes

Clamp Hub

Yes

Yes

Yes

Yes

Yes

Studded

Yes

Yes

Yes

Yes

Yes

End and Outlet Preps

* Not required when using bonnet seal carrier

11

U BOP
Bonnet seal carrier is available to eliminate the need for high makeup
torque on bonnet studs and nuts.
Hydraulically operated locking mechanisms, wedgelocks, lock the ram
hydraulically and hold the rams mechanically closed even when actuating
pressure is released. The operating system can be interlocked using
sequence caps to ensure that the wedgelock is retracted before pressure is
applied to open the BOP.
For subsea applications, a pressure balance chamber is used with the
wedgelocks to eliminate the possibility of the wedgelock becoming unlocked
due to hydrostatic pressure.
Other features include hydraulically opening bonnets, forged body and a
wide selection of rams to meet all applications. See pages 21 through 26
for rams available to fit the U BOP.

The Cameron U BOP is the most widely used ram-type BOP for land, platform
and subsea applications worldwide and offers the widest range of sizes of any
Cameron ram-type BOP.
Like all other Cameron preventers, the rams in the U BOP are pressureenergized. Wellbore pressure acts on the rams to increase the sealing force and
maintain the seal in case of hydraulic pressure loss. Seal integrity is actually
improved by increased well bore pressure.
Other features of the U BOP include:
Hydraulic stud tensioning available on larger sizes to ensure that stud
loading is consistently accurate and even.

SD-3772

Wedgelock Assembly

SD-5308

U Blowout Preventer

12

U BOP Hydraulic Control System


Ram opening pressure opens the rams. Following ram change-out, this
pressure closes the bonnets. The rams are pulled outward, near the bonnets
before the bonnets begin moving toward the preventer body. This assures that
the rams never obstruct the bore or interfere with the pipe in the hole. Hydraulic
pressure draws the bonnets tightly against the preventer body and the bonnet
bolts are reinstalled to hold the bonnets closed.

The U blowout preventer is designed so that hydraulic pressure opens and


closes the rams and provides the means for quick ram change-out.
Ram closing pressure closes the rams. When the bonnet bolts are removed,
closing pressure opens the bonnet. After the bonnet has moved to the fully
extended position, the ram is clear of the body. An eyebolt can be installed in the
top of each ram to lift it out of the preventer.

U Blowout Preventer Hydraulic Control System

SD-84-05

Ram Open, Bonnet Closed


Ram Closed, Bonnet Open

U BOP Operating Data and Fluid Requirements


Bore Size and
Working
Pressure
7-1/16" All WP
11" Except 15,000 psi
11" 15,000 psi
13-5/8" Except 15,000 psi
13-5/8" 15,000 psi Model B
16-3/4" 3000 psi Model B
16-3/4" 5000 psi Model B
16-3.4" 10,000 psi
18-3/4" 10,000 psi
20-3/4" 3000 psi
21-1/4" 2000 psi
21-1/4" 5000 psi
21-1/4" 10,000 psi
26-3/4" 3000 psi

Large Bore Shear Bonnet Operating Data and Fluid Requirements

Gals to Open Gals to Close Locking Closing Opening


Pipe Rams Pipe Rams Screw Turns Ratio Ratio
(1 Set)
(1 Set)
(Each End)
1.3
3.4
5.7
5.5
10.4
9.8
9.8
11.6
21.3
8.1
9.0
27.3
24.5
10.1

1.3
3.5
5.8
5.8
10.6
10.6
10.6
12.5
23.1
8.7
8.7
30.0
26.9
10.8

18
27
32
32
45
38
38
45
54
46
46
54
51
58

6.9:1
7.3:1
9.8:1
7.0:1
10.6:1
6.8:1
6.8:1
6.8:1
7.4:1
7.0:1
7.0:1
7.2:1
7.2:1
7.0:1

Bore Size and


Working
Pressure

2.2:1
2.5:1
2.2:1
2.3:1
3.6:1
2.3:1
2.3:1
2.3:1
3.7:1
1.3:1
1.3:1
4.0:1
4.0:1
1.0:1

7-1/16" All WP
11" Except 15,000 psi
11" 15,000 psi
13-5/8" Except 15,000 psi
13-5/8" 15,000 psi Model B
16-3/4" 3000 psi Model B
16-3/4" 5000 psi Model B
16-3.4" 10,000 psi
18-3/4" 10,000 psi
20-3/4" 3000 psi
21-1/4" 2000 psi
21-1/4" 5000 psi
21-1/4" 10,000 psi
26-3/4" 3000 psi

13

Gals to Open Gals to Close Locking Closing Opening


Pipe Rams Pipe Rams Screw Turns Ratio Ratio
(1 Set)
(1 Set)
(Each End)
__
__
__
__
__
6.8
8.9
10.5
16.0
18.4
18.2
18.2
__

7.9
9.0
10.9
16.2
19.0
19.0
19.1
__

27
32
32
45
38
38
45
__

12.0:1
15.2:1
10.8:1
16.2:1
10.4:1
10.4:1
10.4:1
__

4.8:1
3.7:1
4.5:1
6.0:1
4.4:1
4.4:1
4.4:1
__

14.3
14.3
__
__
__

14.9
14.9
__
__
__

46
46
__
__
__

10.8:1
10.8:1
__
__
__

1.7:1
1.7:1
__
__
__

U BOP Specifications and Accessories


The capital letters in the following designations refer to the three U BOP
dimensional views and dimensions charts shown on the following page.
A-1 Length - bonnets closed, locking screws locked
A-2 Length - bonnets opened, locking screws unlocked
A-3 Length - bonnets closed, with wedgelocks
A-4 Length - bonnets opened, with wedgelocks
B-1 Height - flanged
B-2 Height - clamp hubs
B Height - added height if 30" spacing is required for double
C Width - no side outlets
D Centerline of preventer to outlet flange or hub face. This distance is
variable and must be determined per individual specifications.
E-1 Centerline of side outlet (outlet below rams in double) to bottom flange
face
E-2 Centerline of side outlet (outlet below rams in double) to bottom hub
face
F-1 Top of upper ram to top flange face
F-2 Top of upper ram to top hub face
G Height of ram
H-1 Centerline of side outlet between rams to bottom flange face
H-2 Centerline of side outlet between rams to bottom hub face
J Top of lower ram to bottom of upper ram

The following specifications apply to typical Cameron U type BOPs. Your


Cameron representative can provide information on non-standard BOP
assemblies.
Side outlets to 4-1/16" (7-1/16" on 26-3/4" BOPs) can be provided beneath
each set of rams on either or both sides of U BOPs. Side outlets can be
studded, open-face flange or clamp hub with the same pressure rating as the
vertical run connections.
Flanges conform to API standard 6A and/or 16A. Hubs conform to API 16A
or applicable standards. Type 6BX flanges are standard for 10,000 and
15,000 psi working pressures and for 5000 psi for 13-5/8" and larger bore
BOPs.
Hydraulic control connections for operation of rams and bonnets are 1" NPT.
There are two connections for each set of rams. Wedgelock connections are
1/2" NPT.
The dimensions chart shown on the following page does not include spacers
between rams for double ram models. U BOPs with spacers to clear tool
joints can be obtained on special order.

U BOP Standard Accessories


Size and
Working Pressure
7-1/16" 3000 psi
7-1/16" 5000 psi
7-1/16" 10,000 and 15,000 psi
11" 3000, 5000 and 10,000 psi
11" 15,000 psi
13-5/8" 3000 and 5000 psi
13-5/8" 10,000 psi
13-5/8" 15,000 psi
16-3/4" 3000 and 5000 psi
16-3/4" 10,000 psi
18-3/4" 10,000 psi
20-3/4" 3000 psi
21-1/4" 2000 psi
21-1/4" 5000 psi
21-1/4" 10,000 psi
26-3/4" 10,000 psi

Ram
Lube*
713878
713878
713878
713878
713878
713878
713878
713878
713878
713878
713878
713878
713878
713878
713878
713878

Cameron
Box Wrench*
713114-08
7957-06
713114-10
713114-10
713114-13
7959-08
713114-10
***
713114-13
***
***
713114-08
713114-10
***
***
713114-13

Allen Wrench*
Packing Screw
8721-01
8721-01
8721-01
8721-01
8721-01
8721-01
8721-01
8721-01
8721-01
8721-01
8721-01
8721-01
8721-01
8721-01
8721-01
8721-01

* One required.
**Two required for single preventer, four for double preventer.
*** Commercially available sockets are recommended.

14

Handwheel**
5457
5457
5457
5298
5298
5298
5298
5298
5298
5298
5298
5298
5298
5298
5298
5298

Universal
Joint**
6018-01
6018-01
6018-01
6018-03
6018-03
6018-03
6018-03
6018-03
6018-03
6018-03
6018-03
6018-03
6018-03
6018-03
6018-03
6018-03

Extension
Wrench*
5652
5652
5652
5526
5526
5526
5526
5526
5526
5526
5526
5526
5526
5526
5526
5526

U BOP Dimensions

SD-84-201

Top View - Single or Double U BOP

SD-84-201

Side View - Double U BOP

SD-9928

Side View - Single U BOP

Single Open-Face Flange or Clamp Hub U BOP Dimensions*


Size
7-1/16"**
7-1/16"**
7-1/16"
7-1/16"
11"**
11"**
11"**
11" Model 79
13-5/8"
13-5/8"
13-5/8"
13-5/8" Model B**
16-3/4" Model B
16-3/4" Model B
16-3/4"**
18-3/4"
20-3/4"
21-1/4"
21-1/4"
21-1/4"**
26-3/4"

Pressure
Rating
(psi)

Vertical
Bore
(in.)

A-1

A-2

A-3

A-4

B-1

3000
5000
10,000
15,000
3000
5000
10,000
15,000
3000
5000
10,000
15,000
3000
5000
10,000
10,000
3000
2000
5000
10,000
3000

7-1/16
7-1/16
7-1/16
7-1/16
11
11
11
11
13-5/8
13-5/8
13-5/8
13-5/8
16-3/4
16-3/4
16-3/4
18-3/4
20-3/4
21-1/4
21-1/4
21-1/4
26-3/4

74.000"
74.000"
74.000"
74.000"
96.250"
96.250"
96.250"
124.000"
112.125"
112.125"
114.125"
139.000"
127.250"
129.250"
139.000"
156.375"
143.688"
143.688"
164.250"
163.375"
169.625"

109.500"
109.500"
109.500"
109.500"
146.875"
146.875
146.875
175.312"
171.500"
171.500"
172.750"
214.375"
204.562"
202.125
218.375"
242.125"
226.812"
226.812"
247.250"
250.375"
275.375"

__
__
__
__
__

__
__
__
__
__

110.125"
110.125"
124.500"
122.688"
122.688"
124.688"
152.250"
147.250"
149.250"
155.500"
166.500"
163.938"
163.938"
180.938"
181.125"
__

150.188"
150.188"
167.125"
166.062"
166.062"
167.312"
205.500"
199.375"
202.250"
212.000"
226.625"
223.875"
223.875"
239.250"
239.500"
__

24.062"
27.500"
30.562"
31.812"
29.062"
34.312"
35.688"
44.812"
31.312"
33.812"
41.688"
53.688"
40.062"
43.062"
49.688"
56.000"
40.562"
37.188"
50.938"
66.000"
48.312"

B-2
__
25.188"
27.188"
__
__
29.312"
32.188"
33.875"
__
31.938"
32.812"
42.000"
31.750"
34.938"
41.938"
43.234"
33.312"
33.312"
46.125"
53.000"
__

E-1

20.250"
20.250"
20.625"
20.625"
25.125"
25.125"
25.750"
32.000"
29.250"
29.250"
30.250"
39.500"
35.750"
35.750"
39.500"
42.500"
39.516"
39.516"
42.500"
47.250"
46.250"

8.750"
10.406"
11.062"
11.688"
9.812"
12.438"
13.125"
16.688"
10.312"
11.562"
15.125"
21.375"
13.312"
14.812"
19.375"
20.500"
14.312"
12.625"
17.969"
24.531"
17.438"

E-2

F-1

__

7.844"
9.625"
12.031"
12.656"
10.531"
13.156"
13.844"
17.781"
11.531"
12.781"
17.094"
22.844"
15.406"
16.906"
20.219"
22.000"
16.281"
14.594"
18.719"
26.250"
19.906"

9.250"
9.375"
__
__
9.938"
11.375"
11.219"
__
10.625"
10.688"
15.500"
9.156"
10.750"
15.500"
13.875"
10.688"
10.688"
17.188"
18.031"
__

F-2

Approx.
Weight
(lbs)

__
8.469"
10.344"
__
__
10.656"
12.094"
12.312"
__
11.844"
12.656"
17.000"
11.250"
12.844"
16.344"
15.344"
12.656"
12.656"
14.688"
19.750"
__

5.50"
5.50"
5.50"
5.50"
6.75"
6.75"
6.75"
9.25"
7.50"
7.50"
7.50"
8.00"
9.25"
9.25"
9.25"
12.00"
8.00"
8.00"
13.50"
13.50"
8.00"

2600
2800
3550
3800
5300
5600
6400
10,300
7200
7700
10,300
23,700
13,700
13,750
23,300
28,900
13,650
13,250
30,000
34,650
24,000

*See page 14 for detailed explanation of dimensional designations.


**Available with stud x flange connections.

Double Open-Face Flange or Clamp Hub U BOP Dimensions*


Size

Press.
Rating
(psi)

Vert.
Bore
(in.)

A-1

A-2

A-3

A-4

B-1

B-2

B***

E-1

E-2

F-1

F-2

H-1

H-2

Approx.
Weight
(lbs)

7-1/16"**

3000

7-1/16

74.000"

109.500"

__

__

41.000" __

__

7.844"

5.50" 25.688"

__

11.438"

5000

7-1/16"**

5000

7-1/16

74.000"

109.500"

__

__

44.188" 41.875" 18.812" 20.250" 10.406"

9.250"

9.625"

8.469"

5.50" 27.094"

25.938" 11.188"

5200

7-1/16"

10,000

7-1/16

74.000"

109.500"

__

__

7-1/16

74.000"

109.500"

__

__

10.344"
__

__

__

9.375" 12.031"
__
12.656"
__
10.531"

__

6.75

27.438" 12.562"
__
12.562"
__
13.438"

6400

15,000

48.625" 45.250" 17.438" 20.625" 11.062"


49.875" __
17.438" 20.625" 11.688"
49.250" __
16.562" 25.125" 9.812"

5.50" 29.125"

7-1/16"

54.500" 49.500" 16.562" 25.125" 12.438"

9.938" 13.156"

10.656"

6.75" 32.625"

11"**

3000

11

96.250"

146.875"

11"**

5000

11

96.250"

146.875"

110.125"

150.188"

18.562" 20.250"

8.750"

__

5.50" 29.750"
30.000"

6750
9900

30.125" 13.438" 10,200

11"**

10,000

11

96.250"

146.875"

110.125"

150.188"

55.875" 52.375" 16.562" 25.750" 13.125" 11.375" 13.844"

12.094"

6.75" 33.312"

31.562" 13.438" 11,300

11" Model 79

15,000

11

124.000"

175.312"

124.500"

167.125"

12.312"
__

9.25" 41.625"

36.156" 15.688" 18,400


__
14.562" 14,300

13-5/8"

3000

13-5/8 112.125"

171.500"

122.688"

166.062"

69.750" 58.812" 14.312" 32.000" 16.688" 11.219" 17.781"


53.375" __
15.438" 29.250" 10.312" __
11.531"

13-5/8"

5000

13-5/8 112.125"

171.500"

122.688"

166.062"

55.875" 54.000" 15.438" 29.250" 11.562" 10.625" 12.781"

11.844"

7.50" 33.625"

32.688" 14.562" 14,800

13-5/8"

10,000

13-5/8 114.125"

172.250"

124.688"

167.312"

66.625" 57.750" 12.562" 30.250" 15.125" 10.688" 17.094"

12.656"

7.50" 40.062"

35.625" 17.438" 18,400


43.562" 20.062" 43,250

9.938" 39.500" 21.375" 15.500" 22.844"

7.50" 32.375"

13-5/8" Mod B** 15,000

13-5/8 139.000"

214.375"

152.250"

205.500"

81.750" 70.125"

17.000"

8.00" 49.438"

16-3/4" Mod B

3000

16-3/4 127.250"

204.562"

147.250"

199.375"

65.875" 57.562" 13.438" 35.750" 13.312"

9.156" 15.406"

11.250"

9.25" 39.125"

34.969" 16.562" 26,650

16-3/4" Mod B

5000

16-3/4 129.250"

202.125"

149.250"

202.250"

68.875" 60.750" 13.438" 35.750" 14.812" 10.750" 16.906"

12.844"

9.25" 40.625"

36.562" 16.562" 26,940

16-3/4"**

10,000

16-3/4 139.000"

218.375"

155.500"

212.000"

77.750" 70.000" 11.188" 39.500" 19.375" 15.500" 20.219"

16.344"

9.25" 47.438"

43.562" 18.812" 43,500

18-3/4"

10,000

18-3/4 156.375"

242.125"

166.500"

226.625"

87.125" 74.000" 10.875" 42.500" 20.500" 13.875" 22.000"

15.344" 12.00" 51.500"

44.875" 19.125" 56,950

20-3/4"

3000

20-3/4 143.688"

226.812"

163.938"

223.875"

66.125" 58.875" 12.438" 39.516" 14.312" 10.688" 16.281"

12.656"

8.00" 39.875"

36.250" 17.562" 25,550

21-1/4"

2000

21-1/4 143.688"

226.812"

163.938"

223.875"

62.750" 58.875" 12.438" 39.516" 12.625" 10.688" 14.594"

12.656"

8.00" 38.188"

36.250" 17.562" 25,150

21-1/4"
21-1/4"**
26-3/4"

5000

21-1/4 164.250"

247.250"

180.938"

239.250"

10,000

21-1/4 163.375"

250.375"

3000

26-3/4 169.625"

275.375"

181.125"
__

239.500"
__

82.375" 74.000" 12.375" 42.500" 17.969" 17.188" 18.719"


100.062" 87.062"
78.875" __

*See page 14 for detailed explanation of dimensional designations.


**Available with stud x flange connections.
***See previous page for explanation.

15

9.438" 47.250" 24.531" 18.031" 26.250"


7.438" 46.250" 17.438" __
19.906"

14.688" 13.50" 49.031"

45.000" 17.625" 58,000

19.750" 13.50" 58.594"


__
8.00" 48.000"

52.094" 20.562" 65,500


__
22.562" 44,200

7-1/16" 3000 - 11" 10,000 psi WP U BOP Part Numbers


22

37

34

12

36

38

16

15

24

18

22

35

17

19

40

10

SD-5287

42

26

14

13

28

27

33

29

11

32

31

30

25

23

21

41

20

U BOP Exploded View

U Blowout Preventer Part Numbers


Item
No.
1
2
2A
3
4
5
5A
6
6A
7
8
8A
9
10
11
12
12A
13
13A
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43

Description
Description

Qty
Sgl

Qty
Dbl

7-1/16"
3000
psi
Model II

__
Body
1
1
Intermediate Flange
2
4
30266-03
Intermediate Flange/Shear
41499-03**
Bonnet
2
4
30278-04
Ram Assembly
2
4
644216-()
Piston, Operating
2
4
236501-15-11-08
Piston, Operating/Shear
49116-01**
Cylinder, Operating
2
4
30274-02
Cylinder, Operating/Shear
41365-02
Housing, Locking Screw
2
4
30308-01
Locking Screw
2
4
30326
Locking Screw/Shear
49258-01
Piston, Ram Change/Open
2
4
30324
Piston, Ram Change/Close
2
4
30325
Cylinder, Ram Change
4
8
30273-02
Bolt, Bonnet
8
16 30312-06
Bolt, Bonnet/Shear
41366-06
Stud, Locking Screw Housing
16
32 219065-10-04-41
Stud, Locking Screw Housing/Shear
38732-57-00-54
Nut, Locking Screw Housing
16
32 2709000-10-01
Check Valve, Plastic Packing
2
4
M517988
Screw, Plastic Packing
2
4
5940-09
Pipe Plug, Plastic Packing
2
4
005930-05-10
Ring, Plastic Packing
2
4
12469-36
Ring, Plastic Energizing
2
4
18586-12
Seal Ring, Connecting Rod
2
4
212741-37-00-01
__
Ring Back-Up
4
8
Seal, Bonnet
2
4
644197-01-00-01
Pin, Ram Guide
4
8
30313-02
O-Ring, Operating Cylinder
4
8
702640-44-61
O-Ring, Operating Piston Rod to Int Flg
2
4
18492-92
Lip Seal, Operating Piston
2
4
710541
Seal Ring, Tail Rod
2
4
11741-32
O-Ring, Wiping
2
4
702640-33-11
O-Ring, Ram Change Piston to Body
4
8
702640-32-41
O-Ring, Ram Change Piston Rod to Int Flg 4
8
702640-32-91
O-Ring, Ram Change Cylinder to Int Flg
4
8
702640-33-81
O-Ring, Ram Change Cylinder to Bonnet
4
8
702640-34-21
O-Ring, Ram Change Piston
4
8
702640-33-21
O-Ring, Bonnet Bolt Retainer
8
16 702640-22-31
Cap Screw, Int Flange to Bonnet
16*** 32*** 702585-22-00-50
Gland, Bleeder
2
4
17454-08
Plug, Bleeder
2
4
17454-09
Lifting Eye
2
2
11849
Packing, Plastic
10
20 7650-08
Washer
2
4
689523-04
Ring, Retainer
2
4
18572-83
Wear Ring, Operating Piston
2
4
49223-03
687117-01
Spacer, Shear****

7-1/16"
5000
psi
Model II
__

7-1/16"
10,000
psi
Model II
__

30266-03
41499-03**
30278-03
644216-()
236501-15-11-08
49116-01**
30274-02
41365-02
30308-01
30326
49258-01
30324
30325
30273-02
30312-02
41366-02
219065-10-04-41
38732-57-00-54
2709000-10-01
M517988
5940-09
005930-05-10
12469-36
18586-12
212741-37-00-01
__

30266-01
41499-01**
30278-02
644216-()
236501-15-11-08
49116-01**
30274-02
41365-02
30308-01
30326
49258-01
30324
30325
30273-02
30312-07
41366-07
219065-10-04-41
38732-57-00-54
2709000-10-01
M517988
5940-09
005930-05-10
12469-36
18586-12
212741-37-00-01
21792-21
644197-01-00-01 644197-01-00-01
30313-02
30313-02
702640-44-61
702640-44-61
18492-92
18492-92
710541
710541
11741-32
11741-32
702640-33-11
702640-33-11
702640-32-41
702640-32-41
702640-32-91
702640-32-91
702640-33-81
702640-33-81
702640-34-21
702640-34-21
702640-33-21
702640-33-21
702640-22-51
702640-22-91
702585-22-00-50 702585-22-00-50
17454-08
17454-08
17454-09
17454-09
11849
11849
7650-08
7650-08
689523-04
689523-04
18572-83
18572-83
49223-03
49223-03
687117-01
687117-01

7-1/16"
15,000
psi
Model II

11"
5000
psi
Model II

11"
10,000
psi
Model II

__

__

__

__

30266-01
41499-01**
30278-01
644216-()
236501-15-11-08
49116-01**
30274-02
41365-02
30308-01
30326
49258-01
30324
30325
30273-02
30312-01
41366-22
5913-26-10
38732-57-00-54
2709000-10-01
M517988
5940-09
005930-05-10
12469-36
18586-12
212741-37-00-01
21792-21
644197-01-00-01
30313-02
702640-44-61
18492-92
710541
11741-32
702640-33-11
702640-32-41
702640-32-91
702640-33-81
702640-34-21
702640-33-21
702640-23-21
702585-22-00-50
17454-08
17454-09
11849
7650-08
689523-04
18572-83
49223-03
687117-01

30267-03
41457-03**
30268-01
644219-()
673178
698914**
30274-03
41365-03**
30308-02
30365
46628-01
30362
30363
30273-03
30312-04
41366-04
5915-25-10
38732-59-00-65
2709000-12-01
M517988
5940-09
005930-05-10
12469-38
18586-13
212741-38-00-01
21792-22
644197-02-00-01
30313-03
702640-45-11
18492-91
710539
212741-33-00-01
702640-33-51
702640-32-61
702640-33-11
31423-25-13-85
2010180-02
702640-33-51
702640-22-71
702585-22-00-50
17454-08
17454-09
11849
7650-08
689523-05
18572-84
49223-02
687117-02

30267-03
41457-03**
30268-02
644219-()
673178
698914**
30274-03
41365-03**
30308-02
30365
46628-01
30362
30363
30273-03
30312-03
41366-03
5915-25-10
38732-59-00-65
2709000-12-01
M517988
5940-09
005930-05-10
12469-38
18586-13
212741-38-00-01
21792-22
644197-02-00-01
30313-03
702640-45-11
18492-91
710539
212741-33-00-01
702640-33-51
702640-32-61
702640-33-11
31423-25-13-85
2010180-02
702640-33-51
702640-22-91
702585-22-00-50
17454-08
17454-09
11849
7650-08
689523-05
18572-84
49223-02
687117-02

30267-03
41457-03**
30268-03
644219-()
673178
698914**
30274-03
41365-03**
30308-02
30365
46628-01
30362
30363
30273-03
30312-05
41366-05
5915-25-10
38732-59-00-65
2709000-12-01
M517988
5940-09
005930-05-10
12469-38
18586-13
212741-38-00-01
21792-22
644197-02-00-01
30313-03
702640-45-11
18492-91
710539
212741-33-00-01
702640-33-51
702640-32-61
702640-33-11
31423-25-13-85
2010180-02
702640-33-51
702640-23-41
702585-22-00-50
17454-08
17454-09
11849
7650-08
689523-05
18572-84
49223-02
687117-02

*A large bore shear bonnet is available for these sizes. For part numbers, see page 19.
**Part numbers shown are for old style shear bonnets. For current model large bore shear bonnet part numbers, see page 19
***13-5/8" through 16-3/4" and 20-3/4" through 26-3/4" require 24 for single and 48 for double. The 18-3/4" requires 32 for single and 64 for double.
****Required on all 11" 15,000 psi and 16-3/4" 10,000 psi BOPs with manual locking screws.

16

11"
3000
psi
Model II

11" 15,000 - 16-3/4" 5000 psi WP U BOP Part Numbers


22

15

24
37

34

12

36

38

19

18

22

35

17

16

40

10

SD-5287

42

26

14

13

28

33

27

29

11

32

31

30

23

25

21

41

20

U BOP Exploded View

U Blowout Preventer Part Numbers


Item
No.
1
2
2A
3
4
5
5A
6
6A
7
8
8A
9
10
11
12
12A
13
13A
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43

Description
Description

Qty
Sgl

Qty
Dbl

11"
15,000
psi
Model 79

__
Body
1
1
Intermediate Flange
2
4
49391-01
Intermediate Flange/Shear
*
Bonnet
2
4
31241
Ram Assembly
2
4
644222-()
Piston, Operating
2
4
698481
Piston, Operating/Shear
*
Cylinder, Operating
2
4
30274-01
__
Cylinder, Operating/Shear
Housing, Locking Screw
2
4
30308-03
Locking Screw
2
4
30846
__
Locking Screw/Shear
Piston, Ram Change/Open
2
4
31239
Piston, Ram Change/Close
2
4
31238
Cylinder, Ram Change
4
8
30273-01
Bolt, Bonnet
8
16 30312-12
__
Bolt, Bonnet/Shear
Stud, Locking Screw Housing
16
32 38732-61-00-75
__
Stud, Locking Screw Housing/Shear
Nut, Locking Screw Housing
16
32 2709000-14-01
Check Valve, Plastic Packing
2
4
M517988
Screw, Plastic Packing
2
4
5940-09
Pipe Plug, Plastic Packing
2
4
005930-05-10
Ring, Plastic Packing
2
4
12469-38
Ring, Plastic Energizing
2
4
18586-13
Seal Ring, Connecting Rod
2
4
011741-38-00-01
Ring Back-Up
4+
8+ 21792-22
Seal, Bonnet
2
4
49272-03
Pin, Ram Guide
4
8
30313-01
O-Ring, Operating Cylinder
4
8
702640-45-51
O-Ring, Operating Piston Rod to Int Flg
2
4
18492-91
Lip Seal, Operating Piston
2
4
710538
Seal Ring, Tail Rod
2
4
212741-34-00-01
O-Ring, Wiping
2
4
702640-33-71
O-Ring, Ram Change Piston to Body
4
8
702640-32-81
O-Ring, Ram Change Piston Rod to Int Flg 4
8
702640-33-31
O-Ring, Ram Change Cylinder to Int Flg
4
8
702640-34-61
O-Ring, Ram Change Cylinder to Bonnet
4
8
702640-42-51
O-Ring, Ram Change Piston
4
8
702640-33-81
O-Ring, Bonnet Bolt Retainer
8
16 702640-23-91
Cap Screw, Int Flange to Bonnet
16*** 32*** 702585-25-00-54
Gland, Bleeder
2
4
17454-08
Plug, Bleeder
2
4
17454-09
Lifting Eye
2
2
11849
Packing, Plastic
10
20 7650-08
Washer
2
4
689523-05
Ring, Retainer
2
4
18572-84
Wear Ring, Operating Piston
2
4
49223-01
687117-03
Spacer, Shear****

13-5/8"
3000
psi
Model II

13-5/8"
5000
psi
Model II

13-5/8"
10,000
psi
Model II

__

__

__

30270-01
686242**
30284-02
644225-()
679816
687542**
30274-01
41365-01**
30308-03
30307
30846
30310
30309
30273-01
30312-09
41366-09
5918-76-10
38732-61-00-75
2709000-14-01
M517988
5940-09
005930-05-10
12469-24
18586-01
212741-36-00-01
__

30270-01
686242**
30284-01
644225-()
679816
687542**
30274-01
41365-01**
30308-03
30307
30846
30310
30309
30273-01
30312-01
41366-01
5918-76-10
38732-61-00-75
2709000-14-01
M517988
5940-09
005930-05-10
12469-24
18586-01
212741-36-00-01
__

31216
686767**
31241
644225-()
678512
690791**
30274-01
41365-01**
30308-03
30307
30846
31239
31238
30273-01
30312-12
41366-12
5918-76-10
38732-61-00-75
2709000-14-01
M517988
5940-09
005930-05-10
12469-24
18586-01
212741-36-00-01
21792-26
644197-03-00-11 644197-03-00-11 644197-03-00-11
30313-01
30313-01
30313-01
702640-45-51
702640-45-51
702640-45-51
18492-90
18492-90
18492-90
710538
710538
710538
212741-34-00-01 212741-34-00-01 212741-34-00-01
702640-33-71
702640-33-71
702640-33-71
702640-32-81
702640-32-81
702640-32-81
702640-33-31
702640-33-31
702640-33-31
702640-34-61
702640-34-61
702640-34-61
702640-42-51
702640-42-51
702640-42-51
702640-33-81
702640-33-81
702640-33-81
702640-23-11
702640-23-21
702640-23-91
702585-25-00-44 702585-25-00-44 702585-25-00-54
17454-08
17454-08
17454-08
17454-09
17454-09
17454-09
11849
11849
11849
7650-08
7650-08
7650-08
689523-01
689523-01
689523-01
18572-85
18572-85
18572-85
49223-01
49223-01
49223-01
687117-03
687117-03
687117-03

*A large bore shear bonnet is available for these sizes. For part numbers, see page 19.
**Part numbers shown are for old style shear bonnets. For current model large bore shear bonnet part numbers, see page 19.
***13-5/8" through 16-3/4" and 20-3/4" through 26-3/4" require 24 for single and 48 for double. The 18-3/4" requires 32 for single and 64 for double.
****Required on all 11" 15,000 psi and 16-3/4" 10,000 psi BOPs with manual locking screws.
+11" 15,000 psi requires 8 for single, 16 for double.

17

13-5/8"
15,000
psi
Model B

16-3/4"
3000
psi
Model B

__

__
38944

16-3/4"
5000
psi
Model B
__

698899
*
691849
644228-()
698996
*
30274-06
__

30274-06
__

30308-06
695234
__

30308-06
38901
__

38847
038848-01
30273-06
30312-25
__

38946
38947
30273-07
30312-17
__

5918-34-10
__

5918-78-10
__

2709000-14-01
M517988
5940-09
005930-05-10
12469-24
18586-01
212741-36-00-01
21792-26
644196-01
30313-08
702645-46-11
18492-90
710542
212741-45
702640-34-21
702640-33-21
31423-21-13-85
702640-35-41
702640-43-41
702640-34-41
702640-24-51
702585-31-00-54
17454-08
17454-09
11849
7650-08
689523-01
18572-85
49223-04
687117-05

2709000-14-01
M517988
5940-09
005930-05-10
12469-52
18586-14
212741-44
__

38844
41408
38843-01
644231-()
689562
694085**
30274-06
41365-06**
30308-06
38901
695234
38847
038848-01
30273-06
30312-16
41366-16
5918-78-10
5918-34-10
2709000-14-01
M517988
5940-09
005930-05-10
12469-52
18586-14
212741-44
__

046613-04
30313-06
702645-46-11
2708811-01
710542
212741-45
702640-34-21
702640-33-21
31423-21-13-85
702640-35-41
702640-43-41
702640-34-41
702640-23-21
702585-31-00-44
17454-08
17454-09
11849
7650-08
689523-02
33186-85
49223-04
__

046613-04
30313-06
702645-46-11
2708811-01
710542
212741-45
702640-34-21
702640-33-21
31423-21-13-85
702640-35-41
702640-43-41
702640-34-41
702640-23-71
702585-31-00-54
17454-08
17454-09
11849
7650-08
689523-02
33186-85
49223-04
687117-05

__
38843-02
644231-()
614374-01
__

16-3/4" 10,000 - 26-3/4" 3000 psi WP U BOP Part Numbers


22

37

34

12

36

38

16

15

24

19

18

22

35

17

40

10

SD-5287

42

26

14

13

28

27

33

29

11

32

31

30

23

25

21

20

41

U BOP Exploded View

U Blowout Preventer Part Numbers


Item
No.
1
2
2A
3
4
5
5A
6
6A
7
8
8A
9
10
11
12
12A
13
13A
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43

Description
Description

Qty
Sgl

Qty
Dbl

16-3/4"
10,000
psi
Model II

__
Body
1
1
Intermediate Flange
2
4
691848
Intermediate Flange/Shear
*
Bonnet
2
4
691849
Ram Assembly
2
4
644231-()
Piston, Operating
2
4
692828
Piston, Operating/Shear
*
Cylinder, Operating
2
4
41365-06
__
Cylinder, Operating/Shear
Housing, Locking Screw
2
4
30308-06
Locking Screw
2
4
695234
__
Locking Screw/Shear
Piston, Ram Change/Open
2
4
692756
Piston, Ram Change/Close
2
4
692759
Cylinder, Ram Change
4
8
30273-13
Bolt, Bonnet
8
16 30312-24
__
Bolt, Bonnet/Shear
Stud, Locking Screw Housing
16
32 5918-34-10
__
Stud, Locking Screw Housing/Shear
Nut, Locking Screw Housing
16
32 2709000-14-01
Check Valve, Plastic Packing
2
4
M517988
Screw, Plastic Packing
2
4
5940-09
Pipe Plug, Plastic Packing
2
4
005930-05-10
Ring, Plastic Packing
2
4
12469-52
Ring, Plastic Energizing
2
4
18586-14
Seal Ring, Connecting Rod
2
4
212741-44
Ring Back-Up
4
8
21792-34
Seal, Bonnet
2
4
046613-04
Pin, Ram Guide
4
8
30313-06
O-Ring, Operating Cylinder
4
8
702645-46-11
O-Ring, Operating Piston Rod to Int Flg
2
4
2708811-01
Lip Seal, Operating Piston
2
4
710542
Seal Ring, Tail Rod
2
4
212741-45
O-Ring, Wiping
2
4
702640-34-21
O-Ring, Ram Change Piston to Body
4
8
702640-33-21
O-Ring, Ram Change Piston Rod to Int Flg 4
8
31423-21-13-85
O-Ring, Ram Change Cylinder to Int Flg
4
8
702640-35-41
O-Ring, Ram Change Cylinder to Bonnet
4
8
702640-43-41
O-Ring, Ram Change Piston
4
8
702640-34-41
O-Ring, Bonnet Bolt Retainer
8
16 702640-24-51
Cap Screw, Int Flange to Bonnet
16*** 32*** 702585-31-00-72
Gland, Bleeder
2
4
17454-08
Plug, Bleeder
2
4
17454-09
Lifting Eye
2
2
11849
Packing, Plastic
10
20 7650-08
Washer
2
4
689523-02
Ring, Retainer
2
4
33186-35
Wear Ring, Operating Piston
2
4
49223-04
687117-05
Spacer, Shear****

18-3/4"
10,000
psi
Model II
__

20-3/4"
3000
psi
Model II
__

41458
__
41459
644234-()
41460
__
30274-13
__
30308-09
41085
__
40961
40960
30273-09
30312-23
__
5919-38-10
__
2709000-18-01
M517988
5940-09
005930-05-10
12469-72
18586-19
212741-60
21793-40
644197-05-00-01
30313-07
2708812-01
41602-04-13-85
710543
212741-36-00-01
702640-34-51
702640-34-01
2010180-02
702640-43-51
702640-43-81
30101-83-13-85
702640-24-71
702585-36-00-76
17454-08
17454-09
11849
7650-08
689523-03
33186-01-04
49223-07
__

30911-01
41496-01**
30835-01
44256-()
690058
693405**
30274-04
41365-04**
30308-04
30846
34233
30848
30849
30273-04
30312-10
41366-10
5918-76-10
38732-61-00-75
2709000-14-01
M517988
5940-09
005930-05-10
12469-24
18586-01
212741-36-00-01
__

21-1/4"
2000
psi
Model II
__
30911-01
41496-01**
30835-02
44256-()
690058
693405**
30274-04
41365-04**
30308-04
30846
34233
30848
30849
30273-04
30312-11
41366-11
5918-76-10
38732-61-00-75
2709000-14-01
M517988
5940-09
005930-05-10
12469-24
18586-01
212741-36-00-01
__

__
__
49955-01
49963-01
644240-()
49954-01
__
30274-11
__
30308-08
41085
__
41064
41065
30273-11
30312-26
__
5919-38-10
__

2709000-18-01
M517988
5940-09
005930-05-10
12469-70
18586-18
11741-58
21793-39
046613-16
046613-16
46613-09
30313-04
30313-04
30313-07
702640-45-51
702640-45-51
702640-47-01
18492-90
18492-90
30101-88-13-85
710538
710538
710544
212741-34-00-01 212741-34-00-01 212741-36-00-01
702640-33-71
702640-33-71
702640-34-51
702640-33-61
702640-33-61
702640-34-31
702640-34-11
702640-34-11
31423-52-13-85
702640-43-71
702640-43-71
702640-44-01
702640-43-91
702640-43-91
702640-44-21
702640-42-51
702640-42-51
702640-43-11
702640-22-91
702640-22-71
702640-24-71
702585-28-00-50 702585-28-00-50 702585-36-00-93
17454-08
17454-08
17454-08
17454-09
17454-09
17454-09
11849
11849
11849
7650-08
7650-08
7650-08
689523-01
689523-01
2353-46
18572-85
18572-85
33186-92
49223-10
49223-10
49223-11
__
687117-03
687117-03

*A large bore shear bonnet is available for these sizes. For part numbers, see page 19.
**Part numbers shown are for old style shear bonnets. For current model large bore shear bonnet part numbers, see page 19
***13-5/8" through 16-3/4" and 20-3/4" through 26-3/4" require 24 for single and 48 for double. The 18-3/4" requires 32 for single and 64 for double.
****Required on all 11" 15,000 psi and 16-3/4" 10,000 psi BOPs with manual locking screws.
Requires 2 for single and 4 for double.

18

21-1/4"
5000
psi
Model II

21-1/4"
10,000
psi
Model II
__
615369-01
615418-01
41357
644240-()
41356
41374**
30274-11
41365-11**
30308-08
41085
__
41064
41065
30273-11
30312-21
41366-21
5919-38-10
__
2709000-18-01
M517988
5940-09
005930-05-10
12469-70
18586-18
11741-58
21793-39
46613-09
30313-07
702640-47-01
30101-88-13-85
710544
212741-36-00-01
702640-34-51
702640-34-31
31423-52-13-85
702640-44-01
702640-44-21
702640-43-11
702640-24-81
702585-36-00-93
17454-08
17454-09
11849
7650-08
2353-46
33186-92
49223-08
__

26-3/4"
3000
psi
Model II
__
__
38327
38326
44260-()
614376-01
__
30274-05
__
30308-05
34233
__
38174
38324
30273-05
30312-13
__
5918-76-10
__
2709000-14-01
M517988
5940-09
005930-05-10
12469-24
18586-01
212741-36-00-01
__
46613-08
30313-05
702640-45-51
18492-90
710538
212741-34-00-01
702640-33-71
702640-34-41
702640-34-91
702640-43-91
702640-44-11
702645-42-91
702640-23-91
702585-31-00-70
17454-08
17454-09
11849
7650-08
689523-01
18572-85
49223-10
__

Large Bore Shear Bonnets

SD-10816

12A**
2A
24A
26A
5A

42A

Large Bore Shear Bonnet Assembly


(See pages 16, 17 and 18 for items not called out on this drawing.)

3A

Large Bore Shear Bonnet Part Numbers


Item
No.

11"
3000
psi
Model II

Description
(2 Required per Cavity)

11"
5000
psi
Model II

11"
10,000
psi
Model II

11"
15,000
psi
Model 79

13-5/8"
3000
psi
Model 11

13-5/8"
5000
psi
Model II

13-5/8"
10,000
psi
Model II

13-5/8"
15,000
psi
Model B

16-3/4"
5000
psi
Model B

16-3/4"
10,000
psi
Model II

20-3/4"
3000
psi
Model II

21-1/4"
2000
psi
Model II

Bonnet Assembly (Right)

615195-01

615194-01 614596-01

615419-01

615196-01

615191-01

614498-01

615540-01

615530-01

615537-01

615526-01

615525-01

Bonnet Assembly (Left)

615195-02

615194-02 614596-02

615419-02

615196-02

615191-01

614498-02

615540-02

615530-02

615537-02

615526-02

615525-02

2A

Intermediate Flange/Shear

615188-01

615188-01 615188-01

615459-01

615192-01

615192-01

614766-01

615538-01

615528-01

615535-01

615523-01

615523-01

3A

Bonnet/Shear

615189-03

615189-02 615189-01

615640-01

615143-02

615143-01

614772-01

615448-01

615527-01

615534-01

615522-01

615522-02

5A

Operating Piston/Shear

645249-01

645249-01 645249-01

615457-01

615209-01

615209-01

614760-01

615539-01

615529-01

615536-01

615524-01

615524-01

24A

O-Ring, Int Flg to Bonnet Lip

70264045-51

70264045-81

70264045-81

70264045-81

70264045-81

70264546-51

70264546-51

70264546-51

70264045-81

70264045-81

26A

Lip Seal, Operating Piston/Shear

710586

42A

Wear Ring, Operating Piston/Shear 49223-15

70264045-51

70264045-51

710586

710586

710542

710542

710542

710542

710588

710588

710588

710542

710542

49223-15

49223-15

49223-04

49223-04

49223-04

49223-04

49223-17

49223-17

49223-17

49223-14

49223-14

*Two shear bonnet assemblies, one right and one left, are required per cavity. The shear bonnet assembly consists of all items shown on the illustration.
**See pages 16, 17 and 18 for bonnet bolt part numbers.
7

10

17

23

13

11

15

16

SD-10803-99

5
6
1

12

14

Tandem Booster Exploded View

Tandem Booster Part Numbers

Tandem Boosters for U BOPs


A BOP equipped with tandem boosters can
deliver increased shearing force while not
increasing the wear and tear on the packers.
Tandem boosters approximately double the force
available to shear pipe. Since the tailrod of the
tandem booster has the same stroke as the BOP's
operating piston, the standard shear locking
mechanism can be installed on the outside end of
the booster. For information on lock screws and
the required spacers, see pages 16, 17 and 18.
For information concerning applications where
a tandem booster is required, consult your
Cameron representative.

Item
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
26
27

7-1/16"
11"
11" 15,000 psi
Description
3000, 5000
3000, 5000
13-5/8" 3000, 5000
Description
10,000 and 15,000 psi*
5,000 and 10,000 psi
and 10,000 psi
Qty Part No.
Qty Part No.
Qty Part No.
Cylinder
1 644959-01
2 645113-01
2 645113-03
Cylinder Head
1 644960-01
2 645171-01
2 645171-03
Piston
1 644961-01
2 2032370-02
2 645172-03
Tailrod
1 644962-01
2 645173-01
2 645173-03
Adapter Plate
1 644963-01
2 645115-01
2 645115-03
Screw, SDC HD Cap
8 18541-34
16 18542-13
16 18542-14
O-Ring
1 702640-24-91
2 702640-36-11
2 702645-37-11
Seal Ring
1 710541
2 712352
2 710538
Wear Ring, Oper. Piston 1 49223-03
2 49223-21
2 49223-01
Filter, Muffler
1 710621
2 710621
2 710417
Seal, Lip
1 11741-32
2 212741-33-00-01
2 212741-34-00-01
Seal Ring
1 710620
2 712351
2 710419
Wear Ring, Cylinder
1 644443-02
2 644443-03
2 645215-01
Seal Ring
1 705955
2 712445
2 710418
O-Ring
1 702640-33-11
2 702640-33-51
2 702640-33-71
Alignment Ring
1 645116-02
2 645116-01
2 645116-03
__
Pipe Plug
1
2 201018
2 005930-05-10
__
Connector, Tubing
1 19624-01
2
4 204887-10-06-57
Cross
1 6347-08
1 675029-52
1 675029-23
__
Nipple, Pipe Reg.
2
1 685902-07-00-30
1 685902-07-00-30
Hose Assembly
2 711010
2 2708021
2 711374
__
Connector, Tubing
1 204888-08-05-56
2 204887-10-05-56
__
__
Stud, Double End
16 2010189-03
__
Connector, Tubing
1 501133-71-22
2 204887-10-06-56
__
__
Adapter, Pipe
2 675029-01
-

*The 7-1/16" tandem booster is a part of the standard land and platform shear configuration for 7-1/16" U BOPs.

19

20-3/4" 3000 psi


and
21-1/4" 2000 psi
Qty Part No.
2 645113-04
2 645171-03
2 645172-03
2 645173-04
2 645115-03
16 18542-14
2 702645-37-11
2 710538
2 49223-01
2 710417
2 212741-34-00-01
2 710419
2 645215-01
2 710418
2 702640-33-71
2 645116-03
2 005930-05-10
4 204887-10-06-57
2 675029-23
1 685902-07-00-30
2 711374
__
__
__
__
-

U and U II BOP Ram Hang-Off Weights and Shear Requirements


Hang-Off Weights

Hang-Off Weights

Hang-off weights are estimated capacities with hardened top corners of the
hang-off rams. This enables the rams to dig into the tool joint and provide
superior hang-off capacity while still meeting NACE requirements.
For variable bore rams (VBRs) and FLEXPACKER rams, hang-off weights up
to 600,000 lbs on hang-off rams with a maximum pipe diameter of 5" are
allowable.

Pipe Size
3-1/2"
4-1/2"
5"
6-5/8"

Pipe Rams
425,000 lbs
550,000 lbs
600,000 lbs
600,000 lbs

Drill Pipe Shearing Requirements


The minimum shearing configurations needed for each size U BOP to meet
the requirements of the proposed second edition of API 16A are listed in the
following chart. Each shearing configuration is capable of shearing the corre-

sponding pipe at a closing pressure equal to or less than 2800 psi. For further
information on shearing requirements for different pipe sizes and grades, contact your Cameron representative.

Minimum Shearing Configurations for the U BOP


API Designated
Size
7-1/16"
11"
11"
11"
13-5/8"
13-5/8"
13-5/8"
16-3/4"
18-3/4"
20-3/4"
21-1/4"
21-1/4"

Ram
Type
SBR
SBR
DS
SBR
SBR
DS
SBR
SBR
SBR
SBR
SBR
SBR

Pressure
Rating (psi)
All
10,000 and Lower
10,000 and Lower
15,000 and Higher
10,000 and Lower
10,000 and Lower
15,000 and Higher
All
All
3000 and Lower
3000 and Lower
5000 and Higher

Pipe
OD (In.)
3-1/2
5
5
5
5
5
5
5
5
5
5
5

Pipe
Lb/Ft
13.3
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5

Note: See page 19 for a complete list of part numbers for the large bore shear bonnets and tandem boosters.

20

Pipe
Grade
S
E
E
G
G
G
S
S
S
G
G
S

Shearing
Configuration
Shear Bonnets with Tandem Boosters
Shear Bonnets with Tandem Boosters
Large Bore Shear Bonnets
Large Bore Shear Bonnets
Shear Bonnets with Tandem Boosters
Large Bore Shear Bonnets
Large Bore Shear Bonnets
Large Bore Shear Bonnets
Standard Bonnets
Shear Bonnets with Tandem Boosters
Shear Bonnets with Tandem Boosters
Standard Bonnets

U BOP Pipe Rams


Pipe rams are available for use in Cameron U BOPs to fit all commonly used
sizes of tubing, drill pipe, drill collar or casing within the ranges in the charts on
this page and the next page. Cameron pipe rams include the following features:
Cameron pipe rams are self-feeding and incorporate a large reservoir of
packer rubber to ensure a long-lasting seal under all conditions.
Ram packers lock into place and are not dislodged by well flow.
All Cameron pipe rams are suitable for H 2S service per NACE MR-01-75.
CAMRAM top seals are standard for all U BOP pipe rams from 7-1/16
through 18-3/4 sizes. Packer part numbers beginning with 644xxx indicate
the CAMRAM lipped-plate design. All other packers use standard elastomer
material and reinforcement plates.
CAMRAM 350 packers and top seals are available for high temperature
service and for service in which concentrations of H 2S are expected.

Top Seal

SD-10825

Packer

U BOP Pipe Ram

Ram

U BOP Pipe Ram Part Numbers


Pipe
Size

7-1/16" U BOP
3000, 5000, 10,000, and 15,000 psi WP
Top Seal 644214-01-00-01
Assembly

Blind

Ram

Packer

11" U BOP
3000, 5000 and 10,000 psi WP
Top Seal 644217-01-00-01
Assembly

Ram

Packer

11" U BOP
15,000 psi WP
Top Seal 2010453-01
Assembly

Ram

13-5/8" U BOP
3000, 5000 and 10,000 psi WP
Top Seal 644223-01-00-01
Packer

Assembly

Ram

Packer

1.050"

644504-01 644500-01 644215-01-00-01 644219-01 44118-01


__
__
644504-02 644501-01 644215-02

644218-01-00-01 644222-01 44121-01


__
__
__

1.315"

644504-03 644501-02 644215-03

44233-25

44118-07

19243-08

1.660"

644504-04 644501-03 644215-04

44233-02

44118-02

19243-06

1.900"

644504-05 644501-04 644215-05-00-01 44233-03

44118-03

2.062"

644504-06 644501-05 644215-06

44118-04

2.375"

644504-07 644501-06 644215-07-00-01 644219-06 44118-05

2.875"

644504-08 644501-07 644215-08-00-01 644219-07 44118-06

3.500"

644504-09 644502-01 644215-09-00-01 644219-08 644835-01 644218-08-00-01 644222-07 644753-01 2010454-07*

644225-08 644738-01

644224-08-00-01

4.000"

644216-11 644503-02 644215-11-00-01 644219-10 44119-02

644225-10 44149-02

644224-10-00-01

4.500"
4.750"

644216-12 644503-03 644215-12-00-01 644219-11 644835-02 644218-11-00-01 644222-09 644753-02 2010454-09*


__
__
__
__
__
__
44233-12 44119-04 19374-04

5.000"

644216-14 644503-05 644215-14-00-01 644219-14 644835-03 644218-14-00-01 644222-10 644753-03 2010454-10*

5.500"

644216-15 644503-06 19474-06


__
__
__

44233-04

644225-01 44147-01
__
__

644224-01-00-01
__

__

644225-02 44148-06

644224-02

644222-02 44121-02

644221-02

644225-03 44148-05

644224-03

19243-05

644222-03 44121-03

644221-03

644225-04 44148-07

644224-04

19243-04

644222-04 44121-04

644221-04

644225-05 44148-03

644224-05

644218-06-00-01 644222-05 44121-05

2010454-05*

644225-06 44148-01

644224-06-00-01

644218-07-00-01 644222-06 44121-06

2010454-06*

644225-07 44148-02

644224-07-00-01

644218-10

644218-16

__

44234-10

__

44122-04

690808-09

644225-11 644738-02

644224-11-00-01

644225-13 44150-01

644224-13

644225-14 644738-03

644224-14-00-01

44123-01
__

690808-12
__

644225-16 44150-03
__
__

644224-16-00-01
__
31215-09

44233-23

44120-10

644218-17

44234-13
__

6.000"

__

__

__

44233-16

44120-02

19375-02

44234-14

44123-02

690808-13

44244-13

6.625"

__

__

__

44233-17

644835-04 19375-03

44234-15

44123-03

690808-14

644225-18 644738-04-00-02 644224-18-00-01

5.750'

644219-16 44120-01

644221-01
__

44150-04

7.000"

__

__

__

44233-18

44120-04

19375-04

44234-16

44124-01

2010454-14

644225-19 44151-01

7.625"

__

__

__

44233-19

44120-05

644224-20

__

__

44233-22

44120-09

690808-16
__

44151-02

__

44124-02
__

44244-15

7.750"

644210-21-00-01 44234-17
__
19375-11

44244-25

44151-06

19506-09

644224-19-00-01

8.625"

__

__

__

44244-16

44151-03

644224-22

__

19375-06
__

__

__

44120-06
__

__

__

44233-20
__

__

9.000"

__

__

__

44244-24

44151-04

19506-06

9.625"

__

__

__

__

__

__

__

__

__

644225-24 44151-05

644224-24-00-01

10.750"

__

__

__

__

__

__

__

__

__

44244-18

44152-01

038372-00-00-01

11.750"

__

__

__

__

__

__

__

__

__

44244-26

614208-01

614227-01

3.500" Aluminum 644216-10 644503-01 19474-07

44233-08

44119-06

19374-06

__

__

__

44244-20

44149-04

31215-16

4.500" Aluminum 644216-13 644503-04 19474-08


__
__
__
5.000" Aluminum

44233-11

44119-07

19374-07

__

__

__

44244-10

44149-05

31215-17

19374-09

__

__

__

44244-32

44150-08

31215-27

44233-24

44119-08

*After depletion.

21

Part Numbers for U BOP Pipe Rams


Pipe
Size

Blind
1.050"
1.315"
1.660"
1.900"
2.062"
2.375"
2.875"
3.500"
4.000"
4.500"
4.750"
5.000"
5.500"
5.750'
6.000"
6.625"
7.000"
7.625"
7.750"
8.625"
9.000"
9.625"
10.750"
11.750"
13.375"
13.625"
13.750"
16.000"
3.500" Aluminum
4.500" Aluminum
5.000" Aluminum

13-5/8" U BOP
15,000 psi
Top Seal 644226-01
Assembly
Ram

44143-01
__
__
__
__

644227-01
__
__
__
__

44243-02
644228-03
644228-04
644228-05
644228-07
644228-08
44243-11
644228-11
44243-12
__

44144-03
44144-01
44144-02
644739-01
44144-06
644739-02
44144-09
644739-03
44145-03
__

40910-20
644227-03
644227-04
644227-05
644227-07
644227-08
40910-07
644227-11-00-01
40910-08
__

44243-14
44243-15
44243-16
44243-17
44243-22
44243-18
44243-19
44243-20
44243-21
__
__
__
__
__

44145-04
644739-04
44146-01
44146-02
44146-07
44146-03
44146-04
44146-05
44146-06
__
__
__
__
__

40910-09
40910-10
644227-15
644227-16
40910-23
40910-13
40910-14
644227-20
40910-22
__
__
__
__
__

44243-06
44243-08
__

44144-05
44144-08
__

40910-16
40910-05
__

644231-01
__
__
__

44179-01
__
__
__

644231-02
__

44180-03
__

644231-03
644231-04
644231-05
644231-06
644231-07
644231-08
644231-09
644231-10
__

44180-01
44180-02
644740-01
44181-02
644740-02
44181-04
644740-03
44181-06
__

644231-11
644231-12
644231-13
644231-14
__
644231-15
644231-16
644231-17
644231-18
644231-19
644231-20
__
__
__
__
__
__

644230-01
__
__
__

18-3/4" U BOP
10,000 psi
Top Seal 644232-01-00-01
Assembly
Ram
Packer

21-1/4" U BOP
5000 and 10,000 psi
Top Seal 2010939-01
Assembly
Ram
Packer

644234-01
__
__
__
__
__

44184-01
__
__
__
__
__

644233-01
__
__
__
__
__

44262-01
__
__
__
__
__

44214-01
__
__
__
__
__

2010851-19
__
__
__
__
__

644230-03
644230-04
644230-05
644230-06
644230-07
644230-08
644230-09
644230-10
__

44254-02
44254-03
644234-04
44254-06
44254-07
44254-09
644234-10
44254-11
__

44185-01
44185-02
644741-01
44185-05
644741-02
44185-08
644741-03
44185-10
__

41856-01
644233-03
44233-04
41856-04
41856-05
41856-06
644233-10
41856-08
__

44262-02
44262-03
44262-04
44262-06
44262-07
44262-09
44262-10
44262-11
__

44215-01
44215-02
644743-01
44215-05
644743-02
44215-08
644743-03
44215-10
__

40962-01
40962-02
40962-03
40962-04
40962-05
40962-06
2010851-07
40962-08
__

49291-01
49291-02
49291-03
49291-04
__

644230-11
644230-12
644230-13
644230-14
__

44254-13
44254-14
44254-15
44254-16
__

44185-12
044185-13
44185-14
44185-15
__

41856-09
41856-10
41856-11
41856-12
__

44262-13
44262-14
44262-15
44262-16
__

44215-12
044215-13
44215-14
44215-15
__

40962-09
2010851-10
40962-11
40962-12
__

49291-06
49291-07
49292-01
49292-02
49292-03
49292-04
__
__
__
__
__
__

644230-15
644230-16
644230-17
644230-18
644230-19
644230-20
__
__
__
__
__
__

44254-17
44254-18
44254-19
44254-21
__

44185-16
44185-17
44185-18
44185-21
__

41856-13
41856-14
41856-15
41856-20
__

44254-22
__
__
__

44185-20
__
__
__

41856-22
__
__
__

44262-17
44262-18
44262-19
44262-20
44262-21
44262-22
44262-24
__

44215-16
44215-17
44215-18
44216-01
44216-02
44216-03
044216-05
__

40962-13
40962-14
40962-15
40962-20
40962-21
2010851-22
40962-24
__

44254-05
44254-08
__

44185-04
44185-07
__

41856-16
41856-17
__

44262-23
44262-05
44262-08
__

44216-04
44215-04
44215-07
__

40962-23
40962-16
40962-17
__

644230-02
__

21-1/4" Bore 2000 psi


20-3/4" Bore 3000 psi
Top Seal 19514-00-00-01

Pipe Size
Blind
1.050"
1.315"
1.660"
1.900"
2.062"
2.375"
2.875"
3.500"
4.000"
4.500"
4.750"
5.000"
5.500"
5.750'
6.000"
6.625"
7.000"
7.625"
7.750"
8.625"
9.000"
9.625"
10.750"
11.750"
13.375"
13.625"
13.750"
16.000"
18.625"
20.000"

Packer

644228-01
__
__
__
__

16-3/4" U BOP
3000, 5000 and 10,000 psi
Top Seal 644229-01-00-01
Assembly
Ram
Packer

26-3/4" Bore
2000 and 3000 psi
Top Seal 34200

Assembly

Ram

Packer

Assembly

Ram

Packer

44256-01
__
__
__
__
__
__
__

44149-01
__
__
__
__
__
__
__

2010583-03
__
__
__
__
__
__
__

44260-01
__
__
__
__
__

044209-01
__
__
__
__
__

34201-20
__
__
__
__
__

44256-02
44256-03
44256-04
44256-05
44256-06
44256-07
__

645328-01
44192-02
645328-02
44192-04
645328-03
44193-02
__

2010583-22
31228-04
31228-05
31228-06
2010583-07
2010583-08-01
__

44260-02
44260-03
44260-04
44260-05
44260-06
__

614017-01
614017-02
614018-01
614018-02
614018-03
__

34201-01
34201-02
34201-03
34201-04
34201-05
__

44260-07
44260-08
__

614018-04
614018-05
__

34201-06
34201-07
__

44256-08
44256-09
44256-10
44256-11
__

44193-03
645328-04
44193-05
44193-06
__

31228-09
2010583-10-01
31228-11
31228-12
__

44256-13
44256-14
44256-15
044256-16
44256-17
44256-18
44256-21
44256-19
44256-20
44256-22
__

44193-08
44193-09
44193-10
44194-01
44194-02
44194-03
44194-05
44194-04
44195-01
614459-01
__

31228-14
31228-15
31228-16
31228-17
31228-18
2010583-04-01
31228-24
31228-19
31228-21
31228-25
__

44260-09
44260-10
44260-11
44260-12
__
__

614019-01
614019-02
614019-03
614019-04
__
__

34201-08
34201-09
34201-10
34201-11
__
__

44260-14
44260-15
44260-16
44260-17
44260-18
__
__

614019-06
614020-01
614020-02
614020-03
614020-04
__
__

34201-13
34201-14
34201-15
34201-16
34201-17
__
__

44260-19
__

614021-01
__

34201-18
__

44260-20

614021-02

34201-19

22

U BOP Shearing Blind Rams


Cameron SBRs can cut pipe numerous times without damage to the cutting
edge.
The single-piece body incorporates an integrated cutting edge.
CAMRAM top seals are standard for all U BOP shearing blind rams
through 18-3/4". Part numbers beginning with 644xxx indicate CAMRAM.
All other top seals are standard elastomer material.
H 2S SBRs are available for critical service applications and include a blade
material of hardened high alloy suitable for H 2S service.
The Cameron shearing blind ram has a single-piece body with an integrated
cutting edge.

Cameron shearing blind rams shear the pipe in the hole, then bend the
lower section of sheared pipe to allow the rams to close and seal. Shearing
blind rams can be used as blind rams during normal drilling operations.
The DS shearing blind ram can cut larger diameter tubulars or multiple
tubing strings regardless of their orientation to the centerline of the ram. A blade
seal between the upper and lower faces eliminates the need for moving pipe
after shearing.
Features include of shearing blind rams and DS rams include:
Large frontal area on the blade face seal reduces pressure on the rubber and
increases service life.

13

10

12

15

5
7

2
4
SD-9348

4
3

4
11

14

SD-10815

DS Shearing Blind Ram

SD-10827

U BOP H2S Shearing Blind Ram

U BOP Shearing Blind Ram

U BOP H2S Shearing Blind Ram Part Numbers


BOP Bore Size
and Working Pressure
(psi)

1
Upper Ram
Subassembly

2
Ram

3
Blade
Packer

4
Packer

5
Packer

6
Top
Seal

7
Blade
Insert

8
Set
Screw

9
Lower Ram
Subassembly

10
Ram

11
Packer

46751-01-00-01

13-5/8" 5000 and 10,000 644781-01

644780-01 644435-01-00-01 46751-01-00-01 46752-01-00-01 644223-01-00-01 644581-01-00-01 644582-01 644781-02

644780-02

18-3/4" 10,000

2010187-01 2010192-01

2010188-01 2010191-01

2010186-01

2010191-01

2010190-01

2010193-01

2010182-01

644524-01 2010186-02

12
Packer

13
Top
Seal

14
Blade
Insert

46752-01-00-01 644223-01-00-01 644581-02-00-01


2010190-01

2010193-01

2010183-01

Part number 15 for both sizes is 200231.

U BOP DS Shearing Blind Ram**


BOP Bore Size
and Working Pressure

1
Upper Ram
Subassembly

2
Ram

3
Blade
Seal

4
Packer

Description and Item Number


5
6
7
Packer
Top Seal
Lower Ram
Subassembly

8
Ram*

9
Packer*

10
Packer*

11" 5000 and 10,000 psi

645078-01

645079-01

645031-02

645080-02

645080-01

644217-02

645078-02

645079-02

645080-01

645080-02

13-5/8" 5000 and 10,000 psi

645026-01

645027-01-00-04

645031-01

645494-01

645494-02

645033-01

645026-02

645027-02-00-04

645494-01

645494-02

9
Packer*

10
Packer*

*Part of lower ram subassembly, item 7.


**Part numbers listed are the primary base numbers. Call your Cameron representative for part numbers that apply to API 16A specifications.

U BOP Shearing Blind Ram Part Numbers


BOP Bore Size
and Working Pressure

1
Upper Ram
Subassembly

2
Ram

3
Blade
Packer
__

4
Packer

Description and Item Number


5
6
7
Packer
Top Seal
Lower Ram
Subassembly

8
Ram*

46792-01-00-03

46210-01-00-04

49358-01

49358-02-00-01

644214-01-00-01 46792-02

49392-01-00-02

49009-01-00-02 2010462-04

46751-04

46752-04

644217-01-00-01 049392-02-00-02 049010-01-00-02 46751-04

46752-04

11" 15,000 psi

614297-01

614275-01

2010462-04

2010460-07

2010461-07

2010453-01

2010460-07

13-5/8" 5000 and 10,000 psi

46748-01

46749-01

644435-01-00-01 046751-01-00-01 046752-01-00-01 644223-01-00-01 46748-02

614297-02

13-5/8" 15,000 psi

614004-01

614002-01

644435-01-00-01 46751-05

46752-05

644226-01

16-3/4" 5000 psi

46766-01

49006-01

46910-03

46752-03-00-01

644229-01-00-01 46766-02

46751-03-00-01

614004-02

46212-01-00-04

49347-01-00-01

__

7-1/16" 5000, 10,000 and 15,000 psi


11" 5000 and 10,000 psi

614274-01

2010460-07

46750-01

046751-01-00-01 046751-01-00-01

614003-01

46751-05

46752-05

49007-01

46751-03-00-01

46751-03-00-01

16-3/4" 10,000 psi

46773-01

46774-01

46910-03

46751-03-00-01

46752-03-00-01

644229-01-00-01 46773-02

46775-01

046751-03-00-01 46751-03-00-01

18-3/4" 10,000 psi

46776-01

46777-01

46910-02

46751-02

46752-02

644232-02

46776-02

46778-01

46751-02

20-3/4" 3000 psi

46783-01

46784-01

__

615235-01-00-01

__

19514-00-00-01 46783-02

46785-01

615247-01-00-01 615247-02-00-01

21-1/4" 2000 psi

46783-01

46784-01

__

615235-01-00-01

__

19514-00-00-01 46783-02

46785-01

615247-01-00-01 615247-02-00-01

21-1/4" 5000 psi

49983-01

49981-01

46910-05

46751-06

46752-06

645478-01

49983-02

49982-01

46751-06

46752-06

21-1/4" 7500 and 10,000 psi

46788-01

49012-01

46910-05

46751-06

46752-06

645478-01

46788-02

49011-01

46751-06

46752-06

*Part of lower ram subassembly, item 7.

23

46752-02

U BOP DSI and DVS Shear Rams


feature. DSI shear rams are capable of shearing tubing, small pipe, braided
cable, slickline and solid sinker bar.
DVS rams are similar in design to the standard shearing blind rams except
that both blades are V shaped and interlocked. The DVS rams are capable of
shearing tubing, small pipe , braided cable and slickline.

Dual string interlocking (DSI) shear rams and double V shear (DVS) rams are
also available for the U BOP. The interlocking feature of these rams provides the
capability of shearing wireline and braided cable with zero tension in the line,
while still maintaining a seal. The blades are interlocked by using pockets in the
lower ram and arms on the upper ram to prevent any gap between blade surfaces.
DSI rams are similar to standard DS shear rams except for the interlock

Top Seal

Top Seal

Upper Ram Body

Upper Ram Body

Side Packer
Upper Shear Ram
SD11318-99

SD11320-99

Lower Ram Body


Lower Ram Body

Blade Seal
Upper Shear Ram

Side Packer
Lower Shear Ram

Blade Packer
Side Packer

Dual String Interlocking (DSI) Shear Rams

Double V Shear (DVS) Shear Rams

U BOP Variable Bore Rams


VBR Packer

Top Seal

One set of Cameron variable bore rams seals on several sizes of pipe or
hexagonal kelly. Variable bore rams are available in the size ranges listed in the
chart below. All rams listed are suitable for H2S service per NACE MR-01-75.
CAMRAM top seals are standard for all U BOP variable bore rams.
CAMRAM packers are available in most sizes. Packer part numbers beginning
with 644xxx indicate CAMRAM. All other packers are standard elastomer
material.
The variable bore ram packer contains steel reinforcing inserts similar to
those in the Cameron annular BOP packer. The inserts rotate inward when the
rams are closed so the steel provides support for the rubber which seals against
the pipe.

SD-5129

U BOP Variable Bore Ram

U BOP Variable Bore Ram Part Numbers


BOP Size and
Working Pressure

Pipe Size
Range

Ram
Subassembly

Ram
Body

Packer

Top
Seal

7-1/16" 3000, 5000, 10,000 and 15,000 psi

3-1/2" to 2-3/8"

615066-01

615065-01

614616-02

644214-02-00-01

7-1/16 3000, 5000, 10,000 and 15,000 psi

4 - 2-7/8

644901-01

614605-01

614616-02

644214-02-00-01

11 3000, 5000 psi

5 to 2-7/8

645360-01

644836-01

644926-01-00-01

644217-01-00-01

11" 3000, 5000, 10,000 psi

5" to 3-1/2"

645360-01

644836-01

644926-01-00-01

644217-01-00-01

11" 15,000 psi

5" to 2-7/8"

614456-01

644754-01

644931-01

2010453-02

13-5/8" 3000, 5000 and 10,000 psi

7" to 4-1/2"

46675-01

46671-01

644924-01-00-02

644223-02-00-01

13-5/8" 3000, 5000 and 10,000 psi

5" to 2-7/8"

645166-01

644744-01

645089-01

644223-02-00-01

13-5/8" 15,000 psi

7" to 5"

614104-01

614146-01

644924-02

644226-02

13-5/8" 15,000 psi

5" to 3-1/2"

614129-01

644745-01

644921-01

644226-02

16-3/4" 5000 and 10,000 psi

7" to 3-1/2"

46676-01

46672-01

644920-01-00-01

644229-01-00-01

16-3/4" 10,000 psi (only)

5" to 2-7/8"

49410-01

644746-01

645128-01-00-01

644229-01-00-01

18-3/4" 10,000 psi

7-5/8" to 3-1/2"

46677-01

46673-01

644927-01

644232-03-00-01

24

FLEXPACKERS for U BOPs


The Cameron FLEXPACKER ram is the latest development in multiple-bore
sealing. Each FLEXPACKER ram is designed to close and seal around several
diameters of tubing and pipe. These packers can be used in existing Cameron
BOPs. Features include:
Stacks of metal inserts bonded into the elastomer, move radially in the
elastomer as the BOP rams are closed.
As rams are energized, the proper set of metal inserts is forced against the
pipe. The top plate of the packer fits the largest diameter of pipe.

FLEXPACKER Sizes and Part Numbers


BOP Size and
Description

Pipe Size
Diameters

11" 3000, 5000 and 10,000 psi

Packer
Part No.

Top Seal
Part No.

2-3/8" to 3-1/2"

2010123-01

644217-01-00-01

13-5/8" 3000, 5000 and 10,000 psi 2-3/8" to 3-1/2"

2010113-01

644223-01-00-01

18-3/4" 10,000 psi

2-7/8" to 5"

645346-01

644232-04

20-3/4" 3000 psi

5" to 7"

645353-01

19514-00-00-01

21-1/4" 2000 psi

5" to 7"

645353-01

19514-00-00-01

SD-10315

FLEXPACKER

CAMRAM 350 Packers and Top Seals for U BOPs


CAMRAM 350 U BOP pipe ram packers and top seals are available for
applications which require high temperature capabilities and greater H2S
resistance than standard CAMRAM packers and top seals.
CAMRAM 350 is available in all U BOP sizes in which standard CAMRAM
packers and top seals are offered. At present, only pipe sizes (up to 6-5/8") are
manufactured.

CAMRAM 350
Top Seal

SD-7786

CAMRAM 350
Packer

U BOP CAMRAM 350 Packer and Top Seal

U BOP CAMRAM 350 Part Numbers


Pipe Size
(In.)

7-1/16"
3000-15,000 psi
Top Seal: 644701-01

11"
3000-10,000 psi
Top Seal: 644703-01

11"
15,000 psi
Top Seal: 644705-01

13-5/8"
3000-10,000 psi
Top Seal: 644707-01

13-5/8"
16-3/4"
15,000 psi
3000-10,000 psi
Top Seal: 644709-01 Top Seal: 644711-01

18-3/4"
10,000 psi
Top Seal: 644713-01

Packer

Packer

Packer

Packer

Packer

Packer

Packer

Blind

644700-01

644702-01

644704-01

644706-01

644708-01

644712-01
__

2.375

644700-07

644702-06

644704-05

644706-06

644708-03

644710-01
__

2.875

644700-08

644702-07

644706-07

644708-04

644710-04

__

3.500

644702-08

644706-08

644708-05

644710-05

4.000

644700-09
__

644704-06
__

644702-10

__

644706-10

644710-06

4.500

__

644702-11

644704-09

644706-11

644708-07
__

644712-04
__

644710-07

__

5.000

__

644702-14

__

644702-16

644704-10
__

644706-14

5.500

644708-11
__

644710-09
__

644712-10
__

644706-16

25

U BOP Rams for Multiple Completions


Non-sealing centralizing rams and companion subsea dual rams and
packers for use with two strings of the same diameter are available for the

U BOP. Also available are offset bore rams for 7-1/16" and 11" BOPs. Contact
a Cameron representative for more information.

U Blowout Preventer Offset Bore Ram Part Numbers


Preventer
Size
(In.)

Tubing
Size
(In.)

Actual
Centerline
Offset

7-1/16

1.315

1-3/4"

7-1/16

1.660

1-3/4"

7-1/16

1.900

7-1/16

Offset
Range
(In.)

Ram
Assembly

Right-Hand
Ram
(1 Reqd)

Left-Hand
Ram
(1 Reqd)

Right-Hand
Packer
(1 Reqd)

Left-Hand
Packer
(1 Reqd)

Top
Seal
(2 Reqd)

1-3/8 to 1-7/8

44229-01

44108-05

44109-05

21153-07

21154-07

644214-01-00-01

1-3/8 to 1-7/8

44229-02

44108-03

44109-03

21153-04

21154-04

644214-01-00-01

1-3/4"

1-3/8 to 1-7/8

44229-03

44108-01

44109-01

21153-01

21154-01

644214-01-00-01

2-1/16

1-3/4"

1-3/8 to 1-7/8

44229-04

44108-01

44109-01

21153-02

21154-02

644214-01-00-01

7-1/16

2-3/8

1-3/4"

1-3/8 to 1-7/8

44229-05

44108-02

44109-02

21153-03

21154-03

644214-01-00-01

7-1/16

2-7/8

1-3/4"

1-3/8 to 1-7/8

44229-06

44108-04

44109-04

21153-05

21154-05

644214-01-00-01

11

1.660

2"

1-25/32 to 2-7/16

44238-01

44128-04

44129-04

21157-05

21158-05

644217-01-00-01

11

1.900

2-33/64"

1-25/32 to 2-7/16

44238-02

44128-08

44129-08

21157-11

21158-11

644217-01-00-01

11

2-1/16

2"

1-25/32 to 2-7/16

44238-04

44128-01

44129-01

21157-02

21158-02

644217-01-00-01

11

2-3/8

2-1/8"

1-25/32 to 2-7/16

44238-05

44128-02

44129-02

21157-03

21158-03

644217-01-00-01

11

2-7/8

2"

1-25/32 to 2-7/16

44238-07

44128-03

44129-03

21157-04

21158-04

644217-01-00-01

11

3-1/2

2"

1-25/32 to 2-7/16

44238-08

44128-05

44129-05

21157-06

21158-06

644217-01-00-01

Kit Part Numbers

Bonnet Rebuild Softgoods Kits


For popular size U BOPs, a bonnet rebuild softgoods kit is available to
provide all parts required to reseal the operating system.
Kit parts are shrink-film packed to prevent loss and assure long shelf life.
The kits are less expensive than individual parts. All parts in each kit are
identified with part numbers and parts list index numbers.

BOP Size
7-1/16"

Pressure Rating/Bonnet Type


3000, 5000, 10,000 and 15,000 psi All

Kit Part Number*


644909-01

11"

3000, 5000 and 10,000 psi Pipe

644909-02

11

15,000 All

644831-08

13-5/8"

3000, 5000 and 10,000 psi Pipe

644909-03

13-5/8

15,000 All

644831-12

16-3/4"

5000 psi Pipe

644831-14

16-3/4"

10,000 psi All

644831-15

18-3/4"

10,000 psi All

644909-04

20-3/4"

3000 psi Pipe

644831-17

21-1/4"

2000 psi Pipe

644831-18

21-1/4"

5000 psi All

644831-19

21-1/4"

10,000 psi Pipe

644831-21

26-3/4"

3000 psi All

644831-22

*1 kit contains softgoods for 1 bonnet.

18
24

26

42

19

34
SD-5287

25
32
28

27

33

31

21

20

U BOP Bonnet Softgoods Components

30

29

U BOP Bonnet Rebuild Softgoods Kit Components


(Available for 7-1/16" 3000, 5000, 10,000 and 15,000 psi: 11" 3000, 5000 and 10,000 psi; and 13-5/8" 3000, 5000 and 10,000 psi U BOPs.)

Item Number*

Description

Item Number*

Description

18

Ring, Plastic Packing

29

O-Ring, Ram Change Piston to Body

19

Ring, Plastic Energizing

30

O-Ring, Ram Change Piston Rod to Intermediate Flange

20

Seal Ring, Connecting Rod

31

O-Ring, Ram Change Cylinder to Intermediate Flange

21

Ring, Backup

32

O-Ring, Ram Change Piston to Bonnet

24

O-Ring, Operating Cylinder

33

O-Ring, Ram Change Piston

25

O-Ring, Operating Piston Rod to Intermediate Flange

34

O-Ring, Bonnet Bolt Retainer

26

Lip Seal, Operating Piston

39

Packing, Plastic**

27

Seal Ring, Tail Rod

42

Wear Ring, Operating Piston

28

O-Ring, Wiping

*Item numbers are the same as exploded view shown above.


**Not shown on illustration.

26

Hydraulic Bonnet Bolt System

Bonnet Bolt and Tensioner Part Numbers


BOP Size and
Working pressure (psi)

The hydraulic bonnet bolt tensioner eliminates frictional and torsional loads
and reduces the time required for making up and breaking out bonnet bolts.
The hydraulic bonnet bolt is completely interchangeable with conventional
bonnet bolts. It has a standard hexagonal head. An additional external
thread mates with the internal threads in the operating head of the hydraulic
bonnet bolt tensioner. The hydraulic bonnet bolt has its operating rod
permanently secured in the machined hole in the center of the bolt.
The hydraulic bonnet bolt tensioner consists of a compact tensioner unit
with a remote pump.

Bonnet
Bolt

Compact
Tensioner Unit

11" 15,000 All

49795-13-10

614644-13-10*

13-5/8" 5000 Pipe Ram

49795-13-05

614644-13-05*

13-5/8" 5000 Shear Ram

49917-13-05

614644-13-05*

13-5/8" 10,000 Pipe Ram

49795-13-10

614644-13-10

13-5/8" 10,000 Shear Ram

49917-13-10

614644-13-10*

13-5/8" 15,000 All

49795-13-15

614644-13-15**

16-3/4" 5000 Pipe Ram

49795-16-05

614644-16-05*

16-3/4" 5000 Shear Ram

49917-16-05

614644-16-05

16-3/4" 10,000 All

49795-16-10

614644-16-10**

18-3/4" 10,000 All

49795-18-10

614644-18-10**

21-1/4" 5000 All

49795-21-05

614644-18-10**

*Use 25,000 psi WP pump, part number 645035-01.


**Use 30,000 psi WP pump, part number 645035-02.

Bonnet Seals and Connecting Rod Seals


For applications where only bonnet and/or connecting rod seals are required,
Cameron offers individually packaged components. Connecting rod seals are
nitrile rubber. Bonnet seals beginning with 644197 are the newest design.

When high temperature and/or high concentrations of H2S are expected,


Cameron recommends the used of CAMLAST bonnet and connecting rod seals
along with CAMRAM 350 packers and top seals.
U BOP CAMLAST Bonnet and Connecting Rod Seals

U BOP Bonnet and Connecting Rod Seals

BOP
Size

Bonnet Seal
Part Numbers

Connecting Rod Seal


Part Numbers

BOP
Size

Pressure Rating
(psi)

Bonnet
Seals

Connecting
Rod Seals

7-1/16"

3000, 5000, 10,000 and 15,000

644197-01-00-01

212741-37-00-01

11"

3000, 5000 and 10,000

644197-02-00-01

212741-38-00-01

11" 15,000 psi Model 79

644898-01

212741-38-00-01

11"

15,000 Model 79

49272-03

212741-38-00-01

13-5/8" 3000 to 10,000 psi

644573-03

212741-36-00-01

13-5/8"

3000, 5000 and 10,000

644197-03-00-01

212741-36-00-01

13-5/8" 15,000 psi

644898-02

212741-36-00-01

13-5/8"

15,000

49272-02

212741-36-00-01

16-3/4" 3000 and 5000 psi Model B

644573-04

212741-44

16-3/4"

3000, 5000 and 10,000

46613-04

212741-44

16-3/4" 10,000 psi Model II

644573-04

212741-44

18-3/4"

10,000

644197-05-00-01

212741-60

18-3/4" 10,000 psi

644573-05

212741-60

20-3/4"

3000

644197-06

212741-36-00-01

20-3/4" 3000 psi

644573-06

212741-36-00-01

21-1/4"

2000

644197-06

212741-36-00-01

21-1/4" 2000 psi

644573-06

212741-36-00-01

21-1/4"

5000 and 10,000 Model 79

644197-08

11741-58

21-1/4" 5000 psi

644573-08

212741-36-00-01

21-1/4"

7500 and 10,000 Model II

644197-07

11741-58

21-1/4" 7500 and 10,000 psi Model II

644573-07

212741-36-00-01

26-3/4"

3000

46613-08

212741-36-00-01

21-1/4" 10,000 psi Model 79

644573-08

212741-36-00-01

7-1/16" 3000 to 15,000 psi

644573-01

212741-37

11" 3000 to 10,000 psi

644573-02

212741-38-00-01

Bonnet Seal Carriers for U and U II BOPs


The bonnet seal carrier is a bore-type sealing assembly which replaces the
face seal used as the previous bonnet seal. Sealing capability is not dependent
upon bonnet bolt torque. One seal is captured in a machined bore in the BOP
body while the other seal is captured in a machined bore in the intermediate
flange.
The seal carrier was designed, developed and performance-verified for use in
newly manufactured BOPs or as a replacement seal assembly for BOPs where
either the BOP body or the intermediate flange requires weld repair on the sealing
surfaces.
SD-10860

The bonnet seal carrier can be retrofitted to any U or U II BOP.


Part Numbers for Bonnet Seal Carriers for U and U II BOPs
BOP
Type

BOP
Size

Seal Carrier
Qty.

Retainer Ring

Part No.

Qty.

Part No.

Bonnet Seals
Qty.

Part No.

11 3000, 5000 and 10,000 psi

645464-02-00-01

702640-27-61

645484-02-00-01

13-5/8 10,000 psi

645507-01-00-01

702645-27-91

645509-01-00-01

13-5/8 15,000 psi

2010145-01

702645-27-71

2010146-01

18-3/4 10,000 psi

2010185-01

702645-28-31

2010184-01

UII

18-3/4 10,000 psi

645464-01

645485-01-00-01

645484-01-00-01

27

U II BOP
pressure is released. The operating system can be interlocked using
sequence caps to ensure that the wedgelock is retracted before pressure
is applied to open the BOP.
A pressure balance chamber is used with the wedgelocks to eliminate the
possibility of the wedgelock becoming unlocked due to hydrostatic
pressure.
Other features include hydraulically opening bonnets, forged body and a
wide selection of rams to meet all applications. See pages 31 and 32 for
rams available to fit the U II BOP.

The Cameron U II BOP takes all of the features of the U BOP and adapts them
for subsea use in the 18-3/4 10,000 and 15,000 psi WP sizes.
Like all other Cameron preventers, the rams in the U II BOP are pressureenergized. Wellbore pressure acts on the rams to increase the sealing force and
maintain the seal in case of hydraulic pressure loss. Seal integrity is actually
improved by increased well bore pressure. Other features of the U II BOP
include:
Internally ported hydraulic stud tensioning system ensures that stud loading
is consistently accurate and even.
Bonnet seal carrier is available to eliminate the need for high makeup torque
on bonnet studs and nuts.
Hydraulically operated locking mechanisms, wedgelocks, lock the ram
hydraulically and hold the rams mechanically closed even when actuating

SD-10829

18-3/4" Double U II Blowout Preventer

28

U II BOP Hydraulic Control System

Ram Open, Bonnet Closed

Ram Closed, Bonnet Open

SD-8630

U II BOP Operating Data and Fluid Requirements


Bore Size and
Working Pressure
18-3/4" 10,000 psi

Gallons to Open
Pipe Rams (1 Set)
22.3

Gallons to Close
Pipe Rams (1 Set)
24.7

Gallons to Open
Bonnets (1 Set)
33.7

Gallons to Close
Bonnets (1 Set)
25.2

Closing
Ratio
6.8:1

Opening
Ratio
2.5:1

Gallons to Unlock Gallons to Lock


Wedgelock
Wedgelock
5.5
0.66

18-3/4" 15,000 psi

32.3

34.7

43.9

35.2

9.3:1

3.5:1

5.5

0.66

18-3/4" 15,000 psi


with Cylinder

25.8

28.3

37.4

28.7

7.6:1

2.9:1

5.5

0.66

U II BOP Dimensions
The following designations refer to the dimensional drawing:

SD-5139

U II BOP Top View


A

F-1
F-2
G
H-1
H-2
J

E-2

E-1

Length -- bonnets closed, with wedgelocks


Length -- bonnets opened, with wedgelocks
Height -- flanged
Height -- Clamp hubs
Height -- studded x flanged
Width -- no side outlets
Centerline of preventer to outlet flange or hub face. This distance is
variable and must be determined per individual specifications.
Centerline of side outlet (outlet below rams in double) to bottom
flange face
Centerline of side outlet (outlet below rams in double) to bottom
hub face
Top of upper ram to top flange face
Top of upper ram to top hub face
Height of ram
Centerline of side outlet between rams to bottom flange face
Centerline of side outlet between rams to bottom hub face
Top of lower ram to bottom of upper ram

A-1
A-2
B-1
B-2
B-3
C
D

SD-5139

U II BOP Side View

U II Blowout Preventer Dimensions and Weights


BOP Size, Working
Pressure and Body Style

A-1
(In.)

A-2
(In.)
185.500

B-1
(In.)
__

18-3/4" 10,000 Single

147.000

18-3/4" 10,000 Double

147.000

185.500

87.125

18-3/4" 15,000 Single

148.375

186.875

18-3/4" 15,000 Double

148.375

186.875

B-2
(In.)

C
(In.)

E-1
(In.)

E-2
(In.)

F-1
(In.)

F-2
(In.)

G
(In.)

43.125

B-3
(In.)
__

42.50

20.500

13.938

22.250

15.688

11.5

74.000

__

42.50

20.500

13.938

22.250

15.688

11.5

64.750

53.125

__

47.25

23.875

18.062

26.625

20.812

98.875

87.250

84.5

47.25

23.875

18.062

26.625

20.812

29

H-1
(In.)
__

H-2
(In.)
__

J
(In.)
__

Weight
(Lbs)

45.062
__

19.625
__

56,950

11.5

51.625
__

11.5

58.000

52.188

22.625

69,800

29,950
36,700

U II BOP Part Numbers


47
46

41

11

29

42

41

43

42

43

38
4

30

31
44

45

33

48

34

36

35

37

49

3a
3b

32

40

19

54

42
41

39
10

24

26

27

25

28

51

SD-7866

22
23
2
52

14

13

12

15

16

17

18
19

21

20

U II Exploded View

53

U II Blowout Preventer Part Numbers


Item
No.

Description
Description

Qty Qty
Sgl Dbl

18-3/34"
10,000 psi

18-3/4"
15,000 psi

Item
No.

Description
Description

Qty Qty
Sgl Dbl

18-3/34"
10,000 psi

18-3/4"
15,000 psi

Body, Clamped

644102-02

615239-03

29

Stud, Wedgelock

12 24

44854-12

44854-12

Intermediate Flange

615303-01

30

Nut, Wedgelock

12 24

12955-16

12955-16

3a

Bonnet

31

Retainer Ring, Tail Rod

33186-47

33186-47

3b

Bonnet

615302-01
__

614722-03
__
614621-01

32

Seal Ring, Tail Rod

707232

707232

Piston, Operating

Piston, Operating (Super Trim)

Piston, Ram Change Open

614623-01

33

Wear Ring, Ram Change Piston Head

614742-03

614742-03

615304-01
__

614623-05

34

O-Ring, Ram Change to Piston Body

702640-34-31

702640-34-31

614618-02

614618-02

35

O-Ring, Ram Change Cyl to Bonnet

702640-44-21

702640-44-21

Piston, Ram Change Close

614618-01

614618-01

36

O-Ring, Ram Change Cyl to Int. Flg

702640-44-01

702640-44-01

Cylinder, Ram Change

30273-16

30273-16

37

Bearing Gland, Intermediate Flange

8 16

615727-01

615727-01

Stud, Bonnet

8 16

644031-18-10

644612-18-15

38

Seal Rng, Ram Change Pst Rod to Int Flg 4

707233

707233

Piston, Bonnet Stud

8 16

615453-18-10

615453-18-15

39

Connector, Tubing

707159

707159

10

Seal, Bonnet Stud

8 16

615452-18-10

615452-18-15

40

Retainer Ring, Lip Seal Tailrod

614672-04

614672-04

11

Nut, Bonnet Stud

8 16

644018-18-10

615451-18-15

41

Gland, Bleeder

6 12

17454-08

17454-08

12

Pin, Ram Guide

30313-11

30313-11

42

Plug, Bleeder

6 12

17454-09

17454-09

13

Lantern Ring

615332-02-00-00 615332-02-00-00

43

Lifting Eye

11849

11849

14

Ring Retainer, Backup Ring

614672-05

614672-05

44

Seal Ring, Ram Change Piston Head

707231

707231

15

Ring, Backup

610108-15

610108-15

45

Wear Ring, Operating Piston

49223-18

16

Seal Ring, Connecting Rod

710671

710671

45

Wear Ring, Operating Piston

49223-16
__

17

Retainer Plate

615210-01

615210-01

46

Lip Seal, Operating Piston

710546

18

Retainer Ring

41008-08-00-52

41008-08-00-52

46

Lip Seal, Operating Piston

710545
__

19

Bonnet, Seal

644169-01-00-01 644169-01-00-01

47

O-Ring

* **

20

Connector, Tubing

707276

707276

48

Cylinder, Operating

21

Quick Disconnect, Male

708490-01

708490-01

48

Cylinder, Operating

30101-63-13-85 702640-47-11
__
- 30274-15
__
644613-01

615627-01

615627-01

22

Protective Cover

49

Bearing Retainer Ring, Seal

23

Cap Screw

6 12

702500-16-00-10 702500-16-00-10

50

Plastic Packing

24

Screw, Plastic Packing

5940-09

5940-09

51

Ring, Seal Operating Piston

25

Pipe Plug, Plastic Packing

005930-05-10

005930-05-10

52

Ring, Backup

26

Check Valve, Plastic Packing

M517988

M517988

53

Check Valve, Weep Hole

27

Cap Screw, Int Flg to Bonnet

702585-36-00-93 702585-36-00-93

54

28

Ring, Seal Sec Conn Rod

710670

32 64
4

710670

*4 required for 18-3/4" 10,000 psi BOP; 2 required for 18-3/4" 15,000 psi BOP.
**8 required for 18-3/4" 10,000 psi BOP; 4 required for 18-3/4" 15,000 psi BOP.
Alternate parts for 18-3/4 15,000 psi assembly with operating cylinder.

30

49223-19
710851

614348-10

614348-10

7650-08

7650-08

710640

710640

610108-28

610108-28

- 709493

709493

Wedgelock w/Pressure Bal Chamber (RH) 2

615402-01

615402-01

54

Wedgelock w/Pressure Bal Chamber (LH) 2

615402-02

55

O-Ring (Not Shown)

615402-02
__

10 20

702640-46-91

U II BOP Pipe Rams


Pipe rams are available for use in Cameron U II BOPs to fit all commonly
used sizes of tubing, drill pipe, drill collar or casing within the ranges in the
chart on this page. Cameron pipe rams include the following features:
Cameron pipe rams are self-feeding and incorporate a large reservoir of
packer rubber to ensure a long-lasting seal under all conditions.
Ram packers lock into place and are not dislodged by well flow.
Cameron U II pipe rams are suitable for H 2S service per NACE MR-01-75.
CAMRAM top seals are standard for all U II BOP pipe rams.
CAMRAM 350 packers and top seals are available for high temperature
service and for service in which concentrations of H 2S are expected.

Top Seal

U II BOP Pipe Ram Part Numbers


18-3/4" 10,000 and 15,000 psi U II
Top Seal: 645282-01-00-01

Pipe
PipeSize
Size

Packer

SD-5307

Assembly

Ram

Blind

644248-01

615407-01

644247-01*

Packer

2.375"

644248-02

614770-01

644247-02*

2.875"

644248-03

614770-02

644247-03*

3.500"

644248-04

644742-01

644247-04*

3.500" Aluminum

644248-05

614770-04

644247-05

4.000"

644248-06

614770-05

644247-06

4.500"

644248-07

644742-02

644247-07

4.500" Aluminum

644248-08

614770-07

644247-08

4.750"

644248-09

614770-08

644247-09

5.000"

644248-10

644742-03

644247-10-00-01

5.500"

644248-11

614770-10

644247-11*

6.000"

644248-12

614770-12

644247-12

6.625"

644248-13

644742-04

644247-13

7.000"

644248-14

614770-14

644247-14

7.625"

644248-15

614770-15

644247-15

8.625"

644248-16

614770-16

644247-16

9.000"

644248-17

614770-17

644247-17

9.625"

644248-18

614770-18

644247-18-00-01

Ram Body

U II BOP Pipe Ram

CAMRAM Top Seal

U II BOP Variable Bore Rams

CAMRAM VBR Packer

One set of Cameron variable bore rams seals on several sizes of pipe or
hexagonal kelly. Variable bore rams are available in the size ranges listed in the
chart below. All rams listed are suitable for H2S service per NACE MR-01-75.
CAMRAM packers and top seals are standard for all U II BOP variable bore
rams. The variable bore ram packer contains steel reinforcing inserts similar to
those in the Cameron annular BOP packer. The inserts rotate inward when the
rams are closed so the steel provides support for the rubber which seals against
the pipe.

SD-5129

Ram Body

U II BOP Variable Bore Ram

U II BOP Variable Bore Ram Part Numbers


BOP Size and
Working Pressure

Pipe
Size Range

Ram
Assembly

Ram
Body

Packer
Packer

18-3/4" 10,000 psi


18-3/4" 10,000 psi
18-3/4" 15,000 psi
18-3/4" 15,000 psi

7.625" to 3.500"
5.000" to 2.875"
7.625" to 5.000"
5.000" to 3.500"

614879-01
614878-01
614879-01
614878-01

614846-01
644748-01
614846-01
644748-01

644918-01
644919-01
644918-01
644919-01

Top
Seal

645282-01-00-01
644246-02
645282-01-00-01
644246-02

Bonnet Seals and Connecting Rod Seals


Bonnet Seal and Connecting Rod Seal Part Numbers

For applications where only bonnet and/or connecting rod seals are
required, Cameron offers individually packaged components.

Temperature Range

Bonnet Seal

Normal (Up to 250F)

644169-01-00-01

710671

644169-03

711871

High (Up to 350F)

31

Connecting Rod Seal

U II BOP Shearing Blind Rams


Cameron shearing blind rams shear the pipe in the hole, then bend the
lower section of sheared pipe to allow the rams to close and seal. Shearing
blind rams can be used as blind rams during normal drilling operations.
Features include of shearing blind rams include:
Large frontal area on the blade face seal reduces pressure on the rubber and
increases service life.
Cameron SBRs can cut pipe numerous times without damage to the cutting
edge.
The single-piece body incorporates an integrated cutting edge.
CAMRAM top seals are standard for all U II BOP shearing blind rams.
H 2S SBRs are available for critical service applications and include a blade
material of hardened high alloy suitable for H 2S service.
The Cameron shearing blind ram has a single-piece body with an integrated
cutting edge.

1
2
7

SD-10827

U II BOP Shearing Blind Ram

U II BOP Shearing Blind Ram Assemblies


Item
Item

Description
Description
Upper Ram Assembly

2010214-01

Ram

2010216-01

Blade Packer

Packer

615567-01

Packer

615568-01

**6
7

12

18-3/4" 10,000 and


15,000 psi

10

46910-05

Top Seal

645282-01-00-01

Lower Ram Assembly

2010215-01

*8

Ram

2010217-01

*9

Packer

615567-01

*10

Packer

615568-01

SD-10815

3
5
1

11

*Part of lower ram subassembly, item 7.


**Part of upper and lower ram subassemblies, items 1 and 7.

U II BOP H2S Shearing Ram Assemblies


Item
Item

Description
Description

Upper Ram Subassembly

644759-01

Ram

644752-01

Blade Insert

644519-03

Cap Screw

644524-01

U II BOP H2S Shearing Blind Ram

18-3/4" 10,000 and


15,000 psi

CAMRAM 350 Shearing Blind Ram Blade and Side Packers


Item
Item

Description
Description

18-3/4" 10,000 and


15,000 psi

Lower Ram Subassembly

644759-02

Blade Packer, High Temperature

644904-01

10

Ram

644752-02

Left Side Packer, High Temperature

644905-01

11

Blade Insert

644519-02

Right Side Packer, High Temperature

644905-02

12

Pin

200231-00

Top Seal, High Temperature

645246-01

Note: All packers and top seals (Items 3, 4, 5, 6) are the same as the shearing blind ram shown above.

CAMRAM 350 Packers and Top Seals for U II BOPs


CAMRAM 350 U II BOP pipe ram packers and top seals are available for
applications which require higher temperature capabilities than standard
CAMRAM packers and top seals.
CAMRAM 350 is available in all U II BOP sizes in which standard CAMRAM
packers and tops seals are available. At present, only pipe sizes (up to 6-5/8")
are available.

CAMRAM 350
Top Seal

U II BOP CAMRAM 350 Part Numbers


Pipe
PipeSize
Size

18-3/4" 10,000 and 15,000 psi


Top Seal 645282-01
Description

Part No.

Blind

Packer

644714-01

2.375"

Packer

644714-02

2.875"

Packer

644714-03

3.500"

Packer

644714-04

5.000"

Packer

644714-10

5.500"

Packer

644714-11

SD-7786

CAMRAM 350
Packer

U II CAMRAM 350 Packer and Top Seal

32

T BOP
Hydraulic stud tensioning ensures that stud loading is consistently accurate
and even.
Hydraulically operated locking mechanisms, ST locks, act directly on the
operating piston tailrod and are interlocked by sequence caps to ensure that
locks are opened before the BOP is opened.
Bonnet studs instead of bonnet bolts reduce the need to make and break
threads in the BOP body.
Most operating system seals can be replaced with the bonnet in the ramchange position without removing the bonnets.
The standard T BOP has a large enough piston area to shear all commonly
used sizes and grades of drill pipe.
Other features include hydraulically opening bonnets, forged body and
a wide selection of rams to meet all applications. See pages 40 and 41 for
rams available to fit the T BOP.

The Cameron T blowout preventer offers a unique combination of benefits,


including safety, economy, reliability, extended service life, reduced height and
fast and easy service.
Side ram removal on the T BOP permits reduced stack height and facilitates
change-out of rams and packers. Sliding the rams to the side simplifies access
and handling and reduces vertical clearance requirements.
The T BOP is available in a modular design which greatly reduces stack
height. This design is possible because the side ram removal feature of the T
BOP allows for construction of a BOP stack with virtually no extra space
between BOP body cavities. Each BOP body or module has only a slightly
raised face and a gasket prep.
The design of the T is based on Camerons experience with the highly
successful U and U II ram-type BOPs and combines much of this proven
technology including:
Metal-to-metal bonnet gaskets increase the safety and reliability in critical
service applications.

SD-9599

18-3/4" T Blowout Preventer

33

T BOP Hydraulic Control System


Ram closing pressure, shown in the red on the illustration, closes the rams.
When the bonnet nuts are released, closing pressure opens the bonnet. When
the bonnet has moved to the fully extended position, a ram removal tray is
inserted and ram opening pressure brings the rams into the clear for removal.
ST locks are locked by applying pressure, shown in green on the illustration, to
the ST-lock lock port. This pressure wedges a piston-like assembly into position
to ensure that the rams are locked in the closed position. An option is available
where the locks are also locked automatically by installing a sequence valve in
the system.

The T blowout preventer is designed so that hydraulic pressure opens and


closes the rams and provides a means for side ram removal.
Ram opening pressure, shown in blue on the illustration, opens the rams and
closes the bonnets after ram change-out. The rams are pulled outward, close to
the bonnets before the bonnets begin moving toward the preventer body. This
assures that the rams never obstruct the bore or interfere with pipe in the hole.
Hydraulic pressure draws the bonnets tightly against the preventer body and the
bonnet studs are hydraulically tensioned to hold the bonnets closed. Ram
opening pressure is also used to automatically unlock the ST locks.

T BOP Operating Data and Fluid Requirements


Bore Size and
Working Pressure

Gallons to Open
Pipe Rams (1 Set)

Gallons to Close
Pipe Rams (1 Set)

Gallons to Open
Bonnets (1 Set)

Gallons to Close
Bonnets (1 Set)

Closing
Ratio

Opening
Ratio
4.3:1

Gallons to Unlock
ST Locks (1 Set)
__

Gallons to Lock
ST Locks (1 Set)
__

13-5/8" 10,000 psi

12.9

13.9

15.43

13.75

8.6:1

18-3/4" 15,000 psi

22.4

24.3

27.63

24.64

6.7:1

3.1:1

3.42

3.41

T BOP Hydraulic Operating System

SD-10806

SD-10806

Ram Open _ Bonnet Closed, ST Lock Unlock


Ram Closed _ Bonnet Open
ST Lock Lock

T and U II BOP Accessories


T and U II BOP Accessory Part Numbers
A high-pressure, hydraulic pump system is utilized with all Cameron T and
U II BOPs for tensioning of the bonnet studs.

Part Number

34

Description

645035-02

High-Pressure, Hydraulic Pump Unit to Operate Hydraulic Bonnet Studs

615309-01

10-Foot High-Pressure Hose Assembly for Hydraulic Pump Unit

615309-02

25-Foot High-Pressure Hose Assembly for Hydraulic Pump Unit

708490-01

Male Half of Quick-Disconnect Coupling (One Required per Ram Cavity)

T BOP Dimensions
D

Both the 13-5/8" 10,000 psi WP and the 18-3/4" 15,000 psi WP T BOPs are
available in single, double and modular configurations. In addition, end
preparations can be API flange, clamp hub or studded connections.
The following designations refer to the T BOP dimensional drawings on this
page:
A-1 Length -- bonnets closed, with ST locks
A-2 Length -- bonnets opened, with ST locks
A-3 Length -- bonnets closed, locking screws locked
A-4 Length -- bonnets opened, locking screws unlocked
B-1 Height -- flanged
B-2 Height -- clamp hubs
B-3 Height -- studded x flanged
B-4 Height -- modular
C
Width -- no side outlets

Centerline of preventer to outlet flange or hub face. This distance is


variable and must be determined per individual specifications
Top of preventer to centerline of outlet -- flanged
Top of preventer to centerline of outlet -- Cameron clamp hubs
Top of preventer to centerline of outlet -- studded x flanged
Top of preventer to centerline of outlet -- modular
Top of upper ram to top flange face
Top of upper ram to top hub face
Top of upper ram to studded face
Top of upper ram to modular face
Height of ram
Centerline of upper outlet to centerline of lower outlet
Centerline of upper ST lock (or locking screw) to centerline of lower
ST lock (or locking screw)

E-1
E-2
E-3
E-4
F-1
F-2
F-3
F-4
G
H
J

A-1 (Bonnets Closed)

A-3 (Bonnets Closed)

A-4 (Bonnets Opened)

A-2 (Bonnets Opened)

F
E

SD-8635

SD-8491

Side View - 18-3/4" T BOP

C
D

SD-8635

Side View - 13-5/8" T BOP

SD-8492

End View - 18-3/4" T BOP

End View - 13-5/8" T BOP

13-5/8" 10,000 psi WP T BOP Dimensions


Style
Single

A-3
124"

A-4
175.6"

B-1
43.6"

B-2
34.4"

B-3
33.5"

B-4
23.3"

C
32"

E-1
26.7"

E-2
22.1"

E-3
16.6"

E-4
16.6"

F-1
18"

F-2
13.4"

F-3
7.9"

F-4
7.9"

G
7.5"

H
24.6"*

J
24.6"

Weight
15,500 lb

Double

124"

175.6" 68.2"* 59.0"*

58.1"*

32"

26.7"

22.1"

16.6"

18"

13.4"

7.9"

7.5"

24.6"*

24.6"

27,650 lb

Add 12.9" for 30" spacing between rams.

18-3/4" 15,000 psi WP T BOP Dimensions


Style
Single

A-1
177"

A-2
217"

B-1
64.2"

B-2
53"

B-3
49"

B-4
32.1"

C
47"

E-1
40.6"

E-2
35.1"

E-3
25.6"

E-4
24.6"

F-1
26.4"

F-2
20.8"

F-3
11.3"

F-4
10.3"

G
11.5"

H
34"*

J
34"

Weight
44,000 lb

Double

177"

217"

98.3"*

87"*

83.1"*

47"

40.6"

35.1"

25.6"

26.4"

20.8"

11.3"

10.3"

11.5"

34"*

34"

85,000lb

Add 7.6" for 30" spacing between rams.

35

13-5/8 10,000 psi WP T BOP Part Numbers


9

7
5
8

13
10

SD-10809

11

16

13-5/8" 10,000 psi WP T BOP


12

13-5/8" 10,000 psi WP T BOP Component List and Part Numbers


Item
Item
1

Description
Description
Body (Type)

Qty
1

Part No.
644765-01

Item
Item
9

Bonnet Subassembly, RH

Description
Description

Qty

Part No.
644797-01

2*

Plug

201026

10

Bonnet Subassembly, LH

644797-02

TX Bonnet Gasket

644799-01

11

Nut Subassembly

644616-02

Screw, 12 Pt Cap

24

702585-14-00-10

12

Collar Subassembly

644789-01

Bonnet Stud

644652-01

13

O-Ring

702640-32-31

Bearing Retainer

644653-01

14*

Pipe Plug

201024

Split Bearing

644654-01

Wear Ring

614742-10

15*
16

Pipe Plug
Ram Guide Pin

4
4

675029-49
644658-01

*Not shown.

36

13-5/8" 10,000 psi WP T BOP Bonnet Subassembly Part Numbers

46

44

45

42

43

79
78

86
37

47

48

40

41

39

60

53

36

49

50

57

59

38

66
61
56

51
74

73

72

68

67

62

63

51

54

84
SD-10808

69
64

52

58

55

85
30

65

77

76

75

71

70

32
31

33

35

13-5/8" 10,000 psi WP T BOP Bonnet Subassembly Exploded View

34

13-5/8" 10,000 psi WP T BOP Bonnet Subassembly Parts List


Item
30

Description
Bonnet

Qty.
1

Part No.

Item

Description

Qty.

Part No.

644630-01

59

Retaining Ring, Spirolox

18572-18

31

Liner, Operating Cylinder

644631-01

60

O-Ring, Size 360

702640-36-01

32

O-Ring

644768-02

61

Screw, 12 Pt Cap

702585-06-00-30

33

Operating Piston Subassembly

644791-01

62

Backup Ring

644771-01

34

Seal Ring

710410

63

Seal Ring

710369

35

Wear Ring

614742-08

64

Retainer Ring

644737-01

36

Ram Change Piston, Open

644637-01

65

Retaining Ring, Spirolox

708393

37

Ram Change Piston, Close

644637-02

66

Locking Screw Housing

644734-01

38

Seal Ring

710505

67

Locking Screw

644733-01

39

Wear Ring

614742-09

68

O-Ring, Size 459

702645-45-91

40

Cylinder, Ram Change System

644640-01

69

Stud, Double Ended

644450-03

41

O-Ring, Size 336

702640-33-61

70

Nut

644792-01

42

Gland, Ram Change System

644641-01

71

Button

644635-01

43

Backup Ring

644381-06

72

Inner Seal, Hydraulic Bonnet Stud Piston

644651-01

44

Seal Ring

710504

73

Inner Seal, Hydraulic Bonnet Nut

644438-02

45

O-Ring, Size 341

702640-34-11

74

Outer Seal, Hydraulic Bonnet Nut

644439-02

46

Seal Retainer, Ram Change System

644642-01

75

Spacer Ring, Hydraulic Bonnet Stud

644650-01

47

Cylinder Head, Ram Change System

644643-01

76

O-Ring, Size 362

702640-36-22

48

O-Ring, Size 338

702640-33-81

77

Retaining Ring, Spirolox

33186-05

49

Insert, Bonnet Gasket

644644-01

78

Gland

17454-46

50

Screw, 12 Pt Cap

12

702585-14-00-26

79

Blind Plug

17454-36

51

Backup Ring

644381-05

80*

Check Valve

709493

52

Seal Ring

710430

81*

Bleeder Plug Assembly

640202-02

53

Seal Carrier

644726-01

82*

High Pressure Plug

615684-02

54

O-Ring, Size 352

702640-35-21

83*

O-Ring, Size 113

702640-11-31

55

Seal Ring

609745-14

84

Tubing Connector

707276

56

Backup Ring

644381-04

85

Male Quick-Disconnect

708490-01

57

Seal Ring

710429

58

Retainer Ring

644648-01

*Not shown

37

18-3/4 15,000 psi WP T BOP Part Numbers

5
8

13
10
11
17

12

16
SD-8060

18-3/4" 15,000 psi WP T BOP

18-3/4" 15,000 psi WP T BOP Component List and Part Numbers


Item
Item
1

Description
Description
Body (Typical)

Qty
1

Part No.

Item
Item

644622-01

Description
Description
Bonnet Subassembly, RH

Qty
2

Plug

201026

10

Bonnet Subassembly, LH

TX Bonnet Gasket Kit

644770-01

11

Nut Subassembly

16

Screw, 12 Pt Cap

48

702585-14-00-10

12

Collar

16

Bonnet Stud

16

644362-01

13

O-Ring

16
17

Ram Guide Pin


Retaining Ring, Spirolox

Bearing Retainer

644361-01

Split Bearing

16

644360-01

Wear Ring

16

614742-04

38

8
16

Part No.
644562-01-02-01
644562-02-02-02
644616-01
615707-01
702640-32-61
644399-01
711202

18-3/4" 15,000 psi WP T BOP Bonnet Subassembly Part Numbers

47

48

41

38

40

39

37

36

61

60

69

61

46

70

44

45

42

43

50

49

53

58

55

52

62
65

51

52

51

51

59

56

54

57

SD-8061

83

81

82

80

79

78

63

76

75

73

74

30

64

18-3/4" 15,000 psi WP T BOP Bonnet Subassembly


32

31

77
33
35

34

18-3/4" 15,000 psi WP T BOP Bonnet Subassembly Parts List


Item

Description

Qty.

Part No.

Item

Description

Qty.

Part No.

30

Bonnet

644414-01

55

Seal Ring

709630

31

Liner, Operating Cylinder

644470-01

56

Spacer Ring, Connecting Rod

644355-01

32

O-Ring, Size 387

702645-38-71

57

Ret. Ring, Primary Conn. Rod Seal

644356-01

33

Operating Piston Subassembly

644483-04

58

Retaining Ring, Spirolox

709503

34

Seal Ring

709635

59

O-Ring, Size 453

702645-45-31

35

Wear Ring

614742-06

60

Seal Sub, Blind

644491-02

36

Ram Change Piston, Open

644301-01

61

O-Ring, Size 214

702640-21-41

37

Ram Change Piston, Close

644301-02

62

Screw, 12 Pt Cap

702585-06-00-42

38

Seal Ring

709632

63

Stud, Double Ended

644450-01

39

Wear Ring

614742-05

64

Cap Nut

644447-01

40

Cylinder, Ram Change System

615685-01

65

ST-Lock Assembly

645021-01

41

O-Ring, Size 348

702640-34-81

69

Gland, Tubing

17454-46

42

Gland, Ram Change System

615711-01

70

Blind Plug

17454-36

43

Backup Ring

644381-03

71*

Valve, Check

709643

44

Seal Ring

709633

73

High Pressure Plug

615684-02

45

O-Ring, Size 428

702640-42-81

74

O-Ring, Size 113

702640-11-31

46

Seal Retainer, Ram Change System

615712-01

75

Connector, Tubing

707276

47

Cylinder Head, Ram Change System

615713-01

76

Male Quick-Disconnect

708490-01

48

O-Ring, Size 425

702640-42-51

77

Button

615706-01

49

Insert, Bonnet Gasket

644358-03

78

Inner Seal, Hydraulic Bonnet Nut

644438-01

50

Screw, 12 Pt Cap

12

702585-14-00-20

79

Spacer Ring, Hydraulic Bonnet Stud

644359-01

51

Backup Ring

644381-02

80

Outer Seal, Hydraulic Bonnet Nut

644439-01

52

Seal Ring

709631

81

Piston, Hydraulic Bonnet Stud

615709-01

53

Wear Ring

644443-01

82

O-Ring, Size 377

702645-37-71

54

Backup Ring

644381-01

83

Retaining Ring, Spirolox

709636

*Not shown

High Temperature Connecting Rod Seal Part Numbers*


Item
52

Description
Connecting Rod Seal

Part Number
712022

55

Connecting Rod Seal

712021

*Order both part numbers.

39

T BOP Pipe Rams


Pipe rams are available for use in Cameron T BOPs to fit all commonly used
sizes of tubing, drill pipe, drill collar or casing within the ranges in the chart on
this page. Cameron pipe rams include the following features:
Cameron pipe rams are self-feeding and incorporate a large reservoir of
packer rubber to ensure a long-lasting seal under all conditions.
Ram packers lock into place and are not dislodged by well flow.
All Cameron T pipe rams are suitable for H 2S service per NACE MR-01-75.
CAMRAM top seals are standard for all T BOP pipe rams.
CAMRAM 350 packers and top seals are available for high temperature
service and for service in which concentrations of H 2S are expected.

CAMRAM Top Seal

CAMRAM Packer
Ram Body

SD-10824

Wear Pad
Screw

T BOP Pipe Ram

T BOP Pipe Ram Part Numbers


18-3/4" 15,000 psi***
Top Seal 644369-01-00-01

13-5/8" 10,000 psi****


Top Seal 644409-01

Pipe Size
Ram
644479
__

Packer
644427
__

Assembly
644458

Ram
644401

Packer
644486

Blind

Assembly
644457
__

()-01

()-01

()-01**

1.315"

__

__

__

()-02

()-02

()-02

1.660"

__

__

__

()-03

()-03

()-03

1.900"

__

__

__

()-04

()-04

()-04

2.062"

__

__

__

()-05

()-05

()-05

2.375"

()-01

()-01

()-02

()-06

()-06

()-06**

2.875"

()-02

()-02

()-03

()-07

()-07

()-07**

3.500"

()-03

()-03

()-04**

()-08

()-08

()-08**

4.000"

()-04

()-04

()-05

()-10

()-10

()-10

4.500"

()-05

()-05

()-06

()-12

()-12

()-12**

4.750"

()-06

()-06

()-07

()-14

()-14

()-14

5.000"

()-07

()-07

644427-08-00-01

()-15

()-15

()-15**

5.500"

()-08

()-08

()-09

5.562'

()-09

()-09

()-10

()-17
__

()-17
__

()-17**
__

6.000"

()-10

()-10

()-11

()-18

()-18

()-18

6.625"

()-11

()-11

()-12

()-19

()-19

()-19

7.000"

()-12

()-12

()-13

()-20

()-20

()-20**

7.625"

()-13

()-13

()-14

()-21

()-21

()-21**

8.625"

()-14

()-14

()-15

()-22

()-22

()-22

9.000"

()-15

()-15

()-16

()-23

()-23

()-23

9.625"

()-16

()-16

()-17

10.750"

()-17

()-17

()-18

()-24
__

()-24
__

()-24**
__

11.750"

()-18

()-18

()-19

__

__

__

13.375"

()-19

()-19

()-20**

__

__

__

3.500" Aluminum

()-20

()-20

()-21

()-09

()-09

()-09

4.000" Aluminum

()-21

()-21

()-22

()-11

()-11

()-11

4.500" Aluminum

()-22

()-22

()-23

()-13

()-13

()-13

5.000" Aluminum

()-23

()-23

()-24

()-16

()-16

()-16

Base numbers remain the same. Dash numbers change by pipe size.
**Currently available.
***Additional part numbers include: right side wear pad, 644509-01; left side wear pad, 644510-01; and, screws, 644349-01.
****Additional part numbers include: right side wear pad, 644590-01; left side wear pad, 644590-02; and, screws, 644349-01.

T BOP CAMRAM 350 Packers and Top Seal Part Numbers


Description

18-3/4" 15,000 psi

Top Seal

645068-01

3-1/2" Packer

645070-04

5" Packer

645070-08

40

T BOP Shearing Blind Rams


Cameron shearing blind rams shear the pipe in the hole, then bend the
lower section of sheared pipe to allow the rams to close and seal. Shearing
blind rams can be used as blind rams during normal drilling operations.
Features include of shearing blind rams include:
Large frontal area on the blade face seal reduces pressure on the rubber and
increases service life.
Cameron SBRs can cut pipe numerous times without damage to the cutting
edge.
The single-piece body incorporates an integrated cutting edge.
CAMRAM top seals are standard for all T BOP shearing blind rams.
H 2S SBRs are available for critical service applications and include a blade
material of hardened high alloy suitable for H 2S service.
The Cameron SBR has a single-piece body with an integrated cutting edge.

10

11

7
2
6

9
8

CAMRAM 350 Shearing Blind Ram for T BOP Part Numbers


Item
2

Description
Right Packer

Upper SBR

18-3/4" 15,000 psi WP


644893-01

3
4

Left Packer
Top Seal*

644893-02
645068-01

Blade Packer

644894-01

SD-10830

Lower SBR

T BOP Shearing Blind Ram

*The part numbers listed above are used for both standard
and high temperature applications except for the top seal.

T BOP Shearing Blind Ram Part Numbers


18-3/4" T BOP
Item

Description

1
2
3
4
5
6
7
8
9
10
11

Body
Right Packer
Left Packer
Top Seal
Blade Packer
Right Wear Pad
Left Wear Pad
Screw
Blade Insert
Screw
Pin

13-5/8" T BOP

Upper SBR
644514-01

Lower SBR
644514-02

Upper SBR
644591-01

Lower SBR
644591-02

644515-01
644893-01
644893-02
644369-01-00-01
644894-01
644509-01
644510-01
644349-01
644519-03
644524-01
__

644515-02
644893-01
644893-02
644369-01-00-01
__

644402-01
644490-01
644490-02
644409-01
644541-01
644590-01
644590-02
644349-01
644581-01
644582-01
__

644402-02
644490-01
644490-02
644409-01
__

644509-01
644510-01
644349-01
644519-02
__
200231

T BOP Variable Bore Rams

644590-01
644590-02
644349-01
644581-02
__
200231

CAMRAM Top Seal

One set of Cameron variable bore rams seals on several sizes of pipe or
hexagonal kelly. Variable bore rams are available in the size ranges listed in the
chart below. All rams listed are suitable for H2S service per NACE MR-01-75.
CAMRAM packers and top seals are standard for all T BOP variable bore rams.
The variable bore ram packer contains steel reinforcing inserts similar to those in
the Cameron annular BOP packer. The inserts rotate inward when the rams are
closed so the steel provides support for the rubber which seals against the pipe.

CAMRAM Packer
Ram Body

SD-10831

Left Wear Pad


Right Wear Pad

Screw

T BOP Variable Bore Ram

T BOP Variable Bore Ram Part Numbers


BOP Size and
Working Pressure

Pipe Size Range

Assembly

Body

Right

Left
Wear Pad

Screw
Wear Pad

13-5/8" 10,000 psi

2.875" to 5.000"

644618-01

644567-01

644549-01

18-3/4" 15,000 psi

3.500" to 5.000"

644533-02

644576-01

644531-01-01

644409-01

644590-01

644590-02

644349-01

644369-01-00-01

644509-01

644510-01

18-3/4" 15,000 psi

3.500" to 7.625"

644533-01

644575-01

644349-01

644404-01-00-01 644369-01-00-01

644509-01

644510-01

644349-01

Packer

41

Top Seal

TL BOP
18-3/4 15,000 TL BOPs utilize ST locks which are hydraulically
operated and act directly on the operating piston tailrod and are
interlocked by sequence caps to ensure that locks are opened before the
BOP is opened.
Other features include hydraulically opening bonnets, forged body and a
wide selection of rams to meet all applications.

The Cameron TL blowout preventer is designed to meet the demand for a


lightweight BOP for offshore and subsea applications. By eliminating separate
bonnets and intermediate flanges, the weight of the TL has been reduced by as
much as 30% compared to similar models. This is particularly advantageous
on offshore platforms where weight is critical. By converting to a TL system, an
operator can drill the entire well with one BOP stack replacing the old two-stack
system.
The design of the TL is based on experience with the U II and T BOPs and
combines much of this field-proven technology including:
Side ram removal and wear pads on the bottoms of the rams.
Bonnet seal carrier which eliminates the need for high makeup torque on
bonnet studs and nuts.
Bonnet studs instead of bonnet bolts to reduce the need to make and
break threads in the BOP body.
Most operating system seals can be replaced with the bonnet in the ramchange position without removing the bonnets.
18-3/4 5000 and 10,000 TL BOPs are fitted with hydraulically operating
locking mechanisms, wedgelocks, which lock the ram hydraulically and
hold the rams mechanically closed even when actuating pressure is
released. The operating system can be interlocked using sequence caps
to ensure that the wedgelock is retracted before pressure is applied to
open the BOP.

TL BOP Rams
Rams available for the 5000 and 10,000 psi TL BOP include standard pipe
rams as well as Cameron Flexpackers in 5 to 7 and 2-7/8 to 5 pipe sizes.
Also, a DVS shear ram was developed for the TL BOP. The DVS shear ram
is similar to a Cameron shearing blind ram and has two V blades for more
effective shearing. During testing, these rams sheared 6-5/8, 27.6 lb per foot,
S-135 pipe with 2200 psi closing pressure.
The 15,000 psi TL BOP uses the same field proven rams as the 18-3/4
15,000 psi T BOP.

18-3/4 5000 psi WP TL Blowout Preventer

TL BOP Specifications
BOP Size
and
Working Pressure
18-5/8" 10,000 psi
18-5/8" 15,000 psi

Weight w/ Wedglocks
Single
STD X Flange
23,100 lb
38,100 lb

Weight w/ Wedglocks
Double
STD X Flange
36,600 lb
58,400 lb

Weight w/ Lockscrews
Single
STD X Flange
21,900 lb
36,600 lb

Weight w/ Lockscrews
Double
STD X Flange
42,400 lb
55,400 lb

Height
Single
STD X Flange
41.25
47.37

Height
Single
Hub X Hub
41.12
51.12

Height
Double
STD X Flange
67.75
76.59

Height
Double
Hub X Hub
68.62
80.25

BOP Size
and
Working Pressure
18-5/8" 10,000 psi
18-5/8" 15,000 psi

Length
Wedglocks
Bonnets Closed
151.00
151.00

Length
Wedglocks
Bonnets Open
184.00
184.00

Length
Lockscrews Locked
Bonnets Closed
158.38
164.68

Length
Lockscrews Unlocked
Bonnets Open
218.38
221.75

Height
Closing
Single
Volume
STD X Flange
20.20 Gallon
24.30 Gallon

Height
Opening
Single
Volume
Hub X Hub
19.40 Gallon
22.40 Gallon

Height
Closing
Double
Ratio
STD X Flange
10.3:1
6.7:1

Height
Opening
Double
Ratio
Hub X Hub
3.2:1
3.1:1

42

TL BOP Dimensions, Weights and Components


18-3/4 5000 psi WP TL BOP Specifications
*Weight

Height

Length Bonnets
Closed
147.10

Length Bonnets
Open
180.03

Closing
Volume
20.2 gal.

Opening
Volume
19.4 gal.

Closing
Ratio
10.3:1

Opening
Ratio
2.3:1

Single Studded x Flange w/ Wedgelocks

18,700 lb

33.5

Single Studded x Flange w/ Lockscrews

17,500 lb

33.5

148.0

207.0

20.2 gal.

19.4 gal.

10.3:1

2.3:1

Double Studded x Flange w/ Wedgelocks

36,000 lb

59.25

147.10

180.03

20.2 gal.

19.4 gal.

10.3:1

2.3:1

Double Studded x Flange w/ Lockscrews

33,600 lb

59.25

148.0

207.0

20.2 gal.

19.4 gal.

10.3:1

2.3:1

59
8
60

19 18

51

61

17

24

58

21
11 22
16 15

16 17
55

56

43
34

52
42
2

36

25

44

12
13 14

54

10

21

20

32
23

48
46

61
40

26
50

37

33

51

35

35

60
28

39
49
24

30
31
27 29
38
7

43

41
38

37

33

31

30

35

35

47

TL BOP Exploded View

45

SD-11128-99

18-3/4 5000/10,000 psi WP TL BOP Components


Item

Description

Item

Description

Item

Description

Item

Description

Body

16

Secondary Conn.Rod Seal Ring

31

O-Ring, Operating Cylinder Seal

46

O-Ring, Head Lock Side

Bonnet

17

Back-Up Ring

32

Wear Ring, Operating Piston

47

O-Ring, Head Unlock Side

Operating Piston Subassembly

18

Connecting Rod Seal Retainer Ring

33

Wear RIng, Ram Change Piston

48

O-Ring, Wedgelock Piston

Ram Change Piston, Open

19

Spirolox Retaining Ring, Conn. Rod

34

O-RIng

49

Wedgelock Seal Ring

Ram Change Piston, Close

20

Bonnet Seal Carrier

35

O-Ring, Ram Change Cylinder

50

Wedgelock Piston Seal Ring

Ram Change Cylinder

21

Bonnet Seal

36

Ram Chg Piston Seal Ring (3.25ID)

51

Lifting Eye

Ram Change Access Cap

22

O-Ring, Bonnet Seal Carrier

37

Ram Chg Piston Seal Ring (3.5ID)

52

Vent Plug

Bonnet Stud

23

Operating Piston Cylinder

38

O-Ring, Ram Change Access Cap

54

Dowel Pin

Bonnet Cap Nut

24

Wedgelock Housing

39

Wedgelock

55

Patent Nameplate

10

Ram Guide Pin

25

Double-Ended Stud

40

Wedgelock Piston

56

Ram Type BOP Nameplate

11

Spirolox Retaining Ring

26

Heavy Hex Nut

41

Stud

58

Double-Ended Stud

12

Primary Connecting Rod Retainer

27

Tail Rod Seal Ring

42

Stud

59

Heavy Hex Nut

13

Back-Up RIng

28

Tail Rod Retainer Ring

43

Heavy Hex Nut

60

Tubing Gland

14

Primary Connecting Rod Seal Ring

29

Spirolox Retaining Ring, Tail Rod

44

Lock Side Wedgelock Hsng Head

61

Blind Plug

15

Connecting Rod Ring Spacer

30

Operating Piston Seal Ring

45

Unlock Side Wedgelock Hsng Head

43

UL and UM BOPs
The Cameron UL and UM BOPs are lightweight blowout preventers
designed for easy maintenance and long life. Both designs complement the
existing line of U preventers with interchangeable bonnets which can be
installed on any comparable size U BOP. In addition, the bonnet of the UM
BOP features full stroke operation for one-step ram removal. Other features of
the UL and UM BOPs include:

Bonnet seal carrier is available to eliminate the need for high makeup torque
on bonnet studs and nuts.
Hydraulically operated locking mechanisms, wedgelocks, are available for
subsea applications.
Most operating system seals can be replaced with the bonnet in the ramchange position without removing the bonnets.
The UL and UM BOPs utilizes the same rams as the U BOP.
Other features include hydraulically opening bonnets, forged body and a
wide selection of rams to meet all applications.

SD-11255-99

UL Blowout Preventer

44

UL BOP Components
34
22

33

42

35

31

23

31

26

27
39

32

37

30

20

38

28

29

41

34

33

43

37

35

24
46 47

25

36

40

51

10

14

12

11

UL BOP Exploded View


SD-11256-99

19

50

18

16

17

17

16

15

13

SD-11256-99

WP UL BOP Components
Item
1

Description
Solid Block Body

Qty.
1

Item
26

Nut for Cylinder Head

8
2

Description

Qty.

Bonnet

27

Seal Ring, Tail Rod Seal

Operating Piston

28

Retainer Ring, Tail Rod Seal

Ram Change Piston, Open

29

Retaining Ring, Spirolox, Tail Rod

Ram Change Piston, Close

30

Seal Ring,Operating Piston Seal

Ram Change Cylinder

31

O-Ring, Operating Cylinder

Ram Change Piston, Open

32

O-Ring, Booster Piston Retainer

10

Ram Guide Pin

33

Seal Ring

11

Retaining Ring, Spirolox, Connecting. Rod (Primary)

34

Wear Ring, Ram Change Piston

12

Retaining Ring, Primary Connecting Rod Seal,

35

O-Ring, Ram Change Cylinder

13

Back-Up Ring, Primary Connecting Rod Seal,

36

O-Ring, Ram Change Piston to Bonnet

14

Seal Ring, Primary Connecting Rod Seal

37

O-Ring, Ram Change Piston to Body

15

Retainer Ring, Secondary Connecting Rod Seal,

38

Stud, Lock Screw Housing

16

16

Seal Ring, Seal for Secondary Connecting Rod

39

Nut, Lock Screw Housing

16

17

Back-up Ring for Secondary Connecting Rod Seal and

40

Lifting Eye, 2-1/8 Diameter

41

Booster Piston Retainer

2
2

Hydraulic Seal, Connecting Rod (Secondary)

18

Retainer Ring for Hydraulic Connecting Rod Seal,

42

Booster Piston

19

Retaining Ring, Spirolox

43

Booster Piston Seal

20

Locking Screw

46

Nameplate, Ram Type BOP, API 16A

22

Locking Screw Housing

47

Nameplate, Patent - U BOP

23

Operating Cylinder

50

Bonnet Bolt

24
25

Cylinder Head
Stud for Cylinder Head

2
8

51

Bonnet Seal, Compression Type

Note: Quantities listed are for a single ram BOP.

45

DL Annular Blowout Preventer


Twin seals separated by a vented chamber positively isolate the BOP
operating system from well bore pressure. High strength polymer bearing
rings prevent metal-to-metal contact and reduce wear between all moving
parts of the operating systems.
All Cameron DL BOPs are manufactured to comply with NACE specification
MR-01-75 for H 2S service.
Packers for DL BOPs have the capacity to strip pipe as well as close and seal
on almost any size or shape object that will fit into the wellbore. These
packers will also close and seal on open hole. Some annular packers can
also be split for installation while pipe is in the hole. Popular sizes of the
DL BOP are available with high-performance CAMULAR annular packing
subassemblies. See page 50 for information on high temperature
CAMULAR products.
The Cameron DL BOP is available in sizes from 7-1/16 to 21-1/4 and in
working pressures from 2000 to 20,000 psi.

In the unique design of the Cameron DL annular BOP, closing pressure


forces the operating piston and pusher plate upward to displace the solid
elastomer donut and force the packer to close inward. As the packer closes,
steel reinforcing inserts rotate inward to form a continuous support ring of steel
at the top and bottom of the packer. The inserts remain in contact with each
other whether the packer is open, closed on pipe or closed on open hole. Other
features of the DL BOP include:
The Cameron DL BOP is shorter in height than comparable annular
preventers.
A quick-release top with a one-piece split lock ring permits quick packer
change-out with no loose parts involved. The design also provides visual
indication of whether the top is locked or unlocked.
The DL BOP is designed to simplify field maintenance. Components subject
to wear are field-replaceable and the entire operating system may be
removed in the field for immediate change-out without removing the BOP
from the stack.

Packer Inserts
Bore of Top
Quick-Release Top

Access Flaps

Outer Cylinder Lock-Down

Locking Grooves in Body

Packer
Vent

Donut

Pusher Plate

Opening Side of Piston

Closing Side of Piston


Opening Hydraulic Ports
Closing Hydraulic Ports

SD-203-03

Operating Piston

Vent

Cameron DL Annular Blowout

46

D and DL Annular BOP Dimensions, Weights and Components


Comparative Size and Weight Data (All Models Flanged)
16

Size and
Working Pressure

17
11

37
10

46

12

45

67

66

Height
(Inches)

Diameter
(Inches)

7-1/16" 3000 psi

23-15/16

27-7/8

7-1/16" 5000 psi

25-1/2

27-7/8

7-1/16" 10,000 psi

34-7/32

7-1/16", 15,000 psi

Weight
(Pounds)

Gallons
to Close

Gallons
to Open

2738

1.69

1.39

2778

1.69

1.39

37-3/8

7255

2.94

2.55

44-3/4

43-1/4

12,000

6.94

6.12

7-1/16", 20,000 psi

50-3/4

48

17,716

8.38

7.56

11", 3000 psi

32-1/2

41-1/4

8255

5.65

4.69

11", 5000 psi

34-15/16

41-1/4

8447

5.65

4.69

11", 10,000 psi

41-1/16

48-1/2

13,954

10.15

9.05

11", 15,000 psi

62-1/2

61

36,500

23.50

21.30

13-5/8" 3000 psi

36-11/16

50

12,855

12.12

10.34

13-5/8", 5000 psi

40-3/16

52-3/8

16,215

12.12

10.34

13-5/8", 10,000 psi

49-3/32

61

27,262

18.10

16.15

16-3/4" 3000 psi

47

60-1/2

25,950

22.30

19.00

16-3/4" 5000 psi

49

60-1/2

26,300

22.30

19.00

18-3/4" 5000 psi

60-13/16

62

29,560

35.60

29.00

18-3/4" 10,000 psi

70-1/2

67

40,632

51.00

45.10

20-3/4" 3000 psi

54-3/4

66

29,500

40.50

28.40

21-1/4" 2000 psi

53-5/16

66

29,000

40.50

28.40

Annular Blowout Preventer Components


7

Item
No.

36
6
55

15

50
31

69
57
60
52
58
4

59
14

13

53
63

68

64

56

65

3
51
62

54

61
29
34

30

Item
No.

Description

Body

43

Stud

Top

44

Nut

Piston

45

Bushing Retaining Screw

Inner Cylinder Head

46

Oil Injection Fitting

Outer Cylinder Head

47

Lifting Eye*

Pusher Plate

50

Support Plate Bearing Ring

Donut & Packer**

51

Piston ID Bearing Ring

Lock Ring

52

Inner Cylinder OD Bearing Ring

10

Actuator Ring

53

Outer Cylinder ID Bearing Ring

11

Actuator Screw

54

Piston OD Bearing Ring

12

Actuator Screw Bushing

55

Pusher Plate Bearing Ring

13

Outer Cylinder Lock Segment

56

Outer Cylinder ID Wiper Ring

14

Lock Segment Retaining Ring

57

Inner Cylinder OD Wiper Ring

15

Support Plate

58

Inner Cylinder ID Lip Seal

16

Top Trash Seal

59

Inner Cylinder ID Lip Seal

17

Actuator Screw Bearing

60

Inner Cylinder OD Lip Seal

29

Anchor Shackle

61

Piston ID Lip Seal

30

Inner Cylinder Stud

62

Piston OD Lip Seal

31

Inner Cylinder Nut

63

Outer Cylinder ID Lip Seal

32

Stud

64

Outer Cylinder OD Lip Seal

33

Nut

65

Outer Cylinder OD Lip Seal

34

Lock Ring Access Port Plug

66

Top ID Lip Seal

35

Hydraulic Port Plug

67

Top OD Lip Seal

36

Pusher Plate Screw

68

Outer Cylinder ID Lip Seal

37

Actuator Ring Stop Screw

69

Inner Cylinder OD Lip Seal

38

Lifting Eye*

75

Inner Cylinder ID Backup Ring*

39

Lifting Eye*

76

Inner Cylinder OD Backup Ring*

40

Lifting Eye*

77

Outer Cylinder ID Backup Ring*

41
42

Lifting Eye*
Lifting Eye*

78

Top ID Backup Ring*

A complete replacement kit for seals, bearings and scrapers is available.


*Not shown on the illustration.
**CAMULAR high-performance donuts and packers are available for most sizes and working pressures
of the annular BOP.

1
35

Description

SD-5306

Annular BOP Components


47

7-1/16" 3000 - 11" 15,000 psi WP D and DL Annular BOP Part Numbers
Item

7-1/16" 3000 and


5000 psi

Description
Qty

3 Piston
4 Inner Cylinder Head
5 Outer Cylinder Head`
6 Pusher Plate
7 Donut & Packer****
9 Lock Ring
10 Actuator Ring
11 Actuator Screw
12 Actuator Screw Bushing
13 Outer Cylinder Lock Segment
14 Lock Segment Retaining Ring
15 Support Plate
16 Top Trash Seal
17 Actuator Screw Bearing
29 Anchor Shackle
30 Inner Cylinder Stud
31 Inner Cylinder Nut
32 Stud
33 Nut
34 Lock Ring Access Port Plug
35 Hydraulic Port Plug
36 Pusher Plate Screw
37 Actuator Ring Stop Screw
38 Lifting Eye*
39 Lifting Eye*
40 Lifting Eye*
41 Lifting Eye*
42 Lifting Eye*
43 Stud
44 Nut
45 Bushing Retaining Screw
46 Oil Injection Fitting
47 Lifting Eye*
50 Support Plate Bearing Ring
51 Piston ID Bearing Ring
52 Inner Cyl. OD Bearing Ring
53 Outer Cyl. ID Bearing Ring
54 Piston OD Bearing Ring
55 Pusher Plate Bearing Ring
56 Outer Cyl. ID Wiper Ring
57 Inner Cyl. OD Wiper Ring
58 Inner Cylinder ID Lip Seal
59 Inner Cylinder ID Lip Seal
60 Inner Cylinder OD Lip Seal
61 Piston ID Lip Seal
62 Piston OD Lip Seal
63 Outer Cylinder ID Lip Seal
64 Outer Cylinder OD Lip Seal
65 Outer Cylinder OD Lip Seal
66 Top ID Lip Seal
67 Top OD Lip Seal
68 Outer Cylinder ID Lip Seal
69 Inner Cylinder OD Lip Seal
75 Inner Cyl. ID Backup Ring*
76 Inner Cyl. OD Backup Ring*
77 Outer Cyl. ID Backup Ring*
78 Top ID Backup Ring*
*** Complete Replacement Kit

1
1
1
1
1
1
1
4
4
1
1
8
4
8
8
2
2
24
4
4
4
4
4
4
4
1
1
1
1
1
1
1
1
1
1
2
1
1
2
1
1
1
1
1

Part No.

699333-01
699334-01-02
699335-01
699336-01
644856-02
699337-01
699338-01
49089-03
699343-03
__
__
2010341-01
46045-05
699344-03
701002
46037-24
49800-01
__
__
5930-04-10
5930-04-10
46052-04
46052-03
700734
12185-03
12185-02
700735
__
__
__
5940-01-18
700710
__
49122-01
2010196-13
2010196-01
2010196-02
2010196-14
699345-04
700713
700715
615851-31-01
615851-32-01
615847-30-01
615851-33-01
615847-31-01
615851-30-01
615847-29-01
615847-28-01
615851-29-01
706258-11
__
__
__
__
__
__
49742-01

7-1/16" 10,000
psi
Qty

1
1
1
1
1
1
1
4
4
1
1
8
4
12
12
2
2
24
4
4
4
4
4
4
4
4
1
1
1
1
1
1
1
1
1
1
2
1
1
2
1
1
1
1
1

Part No.

699333-02
699334-02-02
699335-02
699336-02
644856-03
699337-02
699338-02
49089-01
699343-01
__
__

7-1/16" 15,000
psi
Qty

1
1
1
1
1
1
1
4
4
2010341-02
1
46045-06
1
699344-01
8
701003
4
46037-16
12
49800-01
12
__
__
5930-05-10
2
5930-05-10
2
46052-05
24
46052-01
4
700734
4
12185-03
4
12185-02
4
700735
4
__
__
__
702514-25-20-08 4
700710
4
12185-01
49122-02
1
2010196-15
1
2010196-03
1
2010196-04
1
2010196-16
1
699345-05
1
700810
1
700809
1
615850-24-01
1
615851-26-01
1
615847-26-01
1
615851-27-01
1
615847-27-01
1
615851-25-01
1
615847-25-01
1
615847-24-01
1
615850-23-01
1
706258-04
1
__
1
__
1
__
__
__
__
1
49742-02
1

Part No.

699333-10
699334-10
699335-10
699336-10
644856-11-00-01
699337-10
699338-10
49089-01
699343-01
__
__

7-1/16" 20,000
psi
Qty

1
1
1
1
1
1
1
4
4
3
1
049793-15
1
46045-14
1
699344-01
8
663311-13
4
46037-30
12
49800-08
12
__
__
5930-07-10
2
5930-05-10
2
46052-08
24
46052-01
4
12185-03
4
12185-02
4
700735
4
700734
2
__
__
__
702514-25-20-08 4
700710
4
__
49122-07
1
2010196-36
1
2010196-33
1
2010196-34
1
2010196-35
1
699345-08
1
705151
1
705152
1
615850-37-01
1
615851-35-01
1
615846-26-01
1
615851-36-01
1
615847-35-01
1
615850-36-01
1
615847-32-01
1
615847-33-01
1
615850-35-01
1
706258-01
1
615851-34-01
1
615847-34-01
1
__
1
__
1
__
1
615399-07
1
49742-13
1

*Not shown on the drawing


***Seals, bearings and scrapers
****These items are sold as a subassembly (packer and donut).
CAMULAR

48

Part No.

11" 3000 and


5000 psi
Qty

Part No.

1
1
1
1
1
1
1
4
4
3
1
1
1
8
4
6
6
5930-07-10
2
5930-05-10
2
46052-08
24
46052-01
4
12185-03
4
12185-02
4
700735
2
700734
4
__
2
__
__
702514-25-20-08 4
700710
2
__
2
49122-07
1
2010196-32
1
2010196-33
1
2010196-34
1
2010196-31
1
699345-08
1
705151
1
705152
1
615851-35-01
1
615850-37-01
1
615846-26-01
2
615851-36-01
1
615847-37-01
1
615850-36-01
2
615847-36-01
1
615847-36-01
1
615850-35-01
1
706258-05
1
615851-34-01
615847-34-01
615378-02
615622-02
615378-03
615378-04
49742-03
1

699333-03
699334-27
699335-27
699336-03
644856-04
699337-27
699338-27
49089-01
699343-01
614350-03
49416-03
2010341-03
46045-11
699344-01
701004
46037-17
49800-04
__
__

699333-11
699334-11-01
699335-11
699336-11
644856-11-00-01
699337-11
699338-11
49089-01
699343-01
614350-02
49416-02
2010341-11
46045-10
699344-01
663311-13
392002-09-00-70
49800-03
__
__

11" 10,000
psi
Qty

Part No.

1
1
1
1
1
1
1
4
4
3
1
1
1
8
4
8
8
5930-05-10
2
5930-05-10
2
46052-06
24
49477-01
4
11849
4
12185-03
4
12185-01
2
12185-02
700735
__
__
702514-25-20-08 4
700594
2
701960
49122-03
1
2010196-17
1
2010196-05
1
2010196-06
1
2010196-18
1
699345-02
1
700619
1
700618
1
615850-15-01
1
615850-14-01
1
615847-17-01
1
615851-16-01
1
615847-16-01
1
615851-17-01
1
615846-04-01
615846-03-01
1
615850-13-01
1
706258-02
1
__
1
__
1
__
__
__
__
49742-09
1

699333-04
699334-28
699335-28
699336-04
644856-05
699337-28
699338-28
49089-01
699343-01
614350-04
49416-04
2010341-07
46045-12
699344-01
663311-13
46037-19
49800-05
__
__

11" 15,000
psi
Qty

Part No.

1
1
1
1
1
1
1
4
4
3
1
1
1
8
4
12
12
5930-07-10
2
5930-05-10
2
46052-07
24
49477-01
4
11849
4
12185-03
4
12185-02
2
__
__
__
__
702514-25-20-08 4
700594
2
__
49122-04
1
2010196-19
1
2010196-07
1
2010196-08
1
2010196-20
1
699345-06
1
700812
1
700811
1
615850-40-01
1
615850-41-01
1
615847-38-01
1
615851-38-01
1
615847-39-01
1
615851-37-01
1
__
1
615846-27-01
615850-38-01
1
706258-03
1
615850-39-01
1
615846-28-01
1
__
1
__
1
__
1
__
1
49742-10
1

699333-38
699334-38
699335-38
699336-38
644800-38
699337-38
699338-38
49089-01
699343-01
614350-09
49416-09
2010341-13
46045-15
699344-02
663311-13
46037-26
49800-05
__
__
614271-03
5930-06-10
46052-10
46052-01
11849
12185-03
12185-02
__
__
__
__
702514-25-20-08
700594
__
49122-10
2010196-40
614246-49
614246-50
2010196-39
699345-10
706452
706451
615850-28-01
615850-27-01
615846-21-01
615850-25-01
615846-19-01
615850-26-01
615846-20-01
__
615850-29-01
46001-01-42
615850-28-01
615846-21-01
615378-01
615378-06
615378-06
615378-05
49742-14

13-5/8" 5000 - 21-1/4" 2000 psi WP D and DL Annular BOP Part Numbers
Item
3
4
5
6
7
9
10
11
12
13
14
15
16
17
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
75
76
77
78
***

13-5/8"
5000 psi

Description
Piston
Inner Cylinder Head
Outer Cylinder Head`
Pusher Plate
Donut & Packer****
Lock Ring
Actuator Ring
Actuator Screw
Actuator Screw Bushing
Outer Cylinder Lock Segment
Lock Segment Retaining Ring
Support Plate
Top Trash Seal
Actuator Screw Bearing
Anchor Shackle
Inner Cylinder Stud
Inner Cylinder Nut
Stud
Nut
Lock Ring Access Port Plug
Hydraulic Port Plug
Pusher Plate Screw
Actuator Ring Stop Screw
Lifting Eye*
Lifting Eye*
Lifting Eye*
Lifting Eye*
Lifting Eye*
Stud
Nut
Bushing Retaining Screw
Oil Injection Fitting
Lifting Eye*
Support Plate Bearing Ring
Piston ID Bearing Ring
Inner Cyl. OD Bearing Ring
Outer Cyl. ID Bearing Ring
Piston OD Bearing Ring
Pusher Plate Bearing Ring
Outer Cyl. ID Wiper Ring
Inner Cyl. OD Wiper Ring
Inner Cylinder ID Lip Seal
Inner Cylinder ID Lip Seal
Inner Cylinder OD Lip Seal
Piston ID Lip Seal
Piston OD Lip Seal
Outer Cylinder ID Lip Seal
Outer Cylinder OD Lip Seal
Outer Cylinder OD Lip Seal
Top ID Lip Seal
Top OD Lip Seal
Outer Cylinder ID Lip Seal
Inner Cylinder OD Lip Seal
Inner Cyl. ID Backup Ring*
Inner Cyl. OD Backup Ring*
Outer Cyl. ID Backup Ring*
Top ID Backup Ring*
Complete Replacement Kit

Qty
1
1
1
1
1
1
1
4
4
3
1
1
1
8
4
6
6
2
2
24
4
4
4
4
4
4
1
1
1
1
1
1
1
1
1
1
2
1
1
2
1
1
1
1
1

13-5/8"
10,000 psi

Part No.
Qty Part No.
699333-05
1 699333-06
699334-05-02 1 699334-30
699335-05
1 699335-30
699336-05
1 699336-06
644856-06
1 644856-07
699337-05
1 699337-30
699338-05
1 699338-30
49089-01
4 49089-02
699343-01
4 699343-02
614350-05
3 614350-01
49416-05
1 49416-01
2010341-05
1 2010341-06
46045-01
1 46045-09
699344-01
8 699344-02
663311-13
4 663311-13
46037-19
12 46037-20
49800-05
12 49800-05
__
__
__
__
5930-07-10
2 5930-08-10
5930-05-10
2 5930-06-10
46052-08
24 46052-09
46052-01
4 46052-02
11849
4 11849
12185-03
4 700649
12185-02
2 12185-01
__
4 12185-03
__
2 700446
__
__
__
__
702514-2520-08
700594
__
49122-05
2010196-21
2010196-09
2010196-10
2010196-22
699345-01
700320
700581
615850-21-01
615850-20-01
615847-22-01
615851-23-01
615847-21-01
615851-24-01
615846-11-01
615846-10-01
615850-19-01
706258-07
__
__
__
__
__
__
49742-11

4
2
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1

702514-2520-08
700594
__
49122-06
2010196-23
2010196-11
2010196-12
2010196-24
699345-03
700319
700320
615850-32-01
615850-33-01
615847-40-01
615850-30-01
615846-22-01
615850-31-01
615846-23-01
615846-24-01
615850-34-01
706258-10
615851-28-01
615846-25-01
__
__
__
__
49742-12

16-3/4"
3000 and 5000 psi
Qty
1
1
1
1
1
1
1
4
4
3
1
1
1
8
4
8
8
2
2
24
4
4
4
2
4
4
2
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1

Part No.
699333-18
699334-18
699335-18
699336-18
644800-18
699337-18
699338-18
49089-02
699343-02
614350-07
49416-07
2010341-12
46045-08
699344-02
663311-13
46037-25
49800-06
__
__
614271-01
5930-06-10
46052-09
46052-02
11849
12185-02
12185-01
700446
__
__
__
702514-2520-08
700594
__
49122-08
2010196-30
2010196-25
2010196-26
2010196-42
699345-07
700994
700993
615850-44-01
615850-45-01
615846-27-01
615850-46-01
615846-29-01
615850-43-01
__
615846-29-01
615850-42-01
706258-09
__
__
__
__
__
__
49742-08

**Exploded view on page 47 is not representative of this assembly.


***Seals, bearings and scrapers.
****These items are sold as a subassembly (packer and donut).
CAMULAR

49

18-3/4"
5,000 psi
Qty
1
1
1
1
1
1
1
4
4
3
1
1
1
8
4
16
16
2
2
24
4
4
4
2
4
4
4
1
1
1
1
1
1
1
1
1
1
2
1
1
2
1
1
1

Part No.
699333-44
699334-44
699335-44
699336-44
644856-09
699337-44
699338-44
49089-04
699343-04
614350-13
49416-09
2010341-17
46045-18
699344-02
663311-13
46037-32
49800-07
__
__
614271-02
5930-06-10
46052-14
46052-02
11849
700649
12185-03
12185-02
__
__
__
702514-2520-08
700594
__
49122-11
2010196-51
2010196-49
2010196-50
2010196-52
699345-14
708000
708003
615850-04-01
615851-01-01
615846-05-01
615850-03-01
615846-01-01
615850-02-01
__
615846-02-01
615850-01-01
__
__
__
__
__
__
__
49742-16

18-3/4"
10,000 psi
Qty
1
1
1
1
1
1
1
4
4
3
1
1
1
8
4
16
16
2
2
24
4
4
4
2
4
4
2
1
1
1
1
1
1
1
1
1
2
1
1
2
1
1
1
1
1

Part No.
699333-21
699334-21
699335-21
699336-21
644856-01
699337-21
699338-21
49089-02
699343-02
614350-06
49416-06
615483-01
46045-16
699344-02
663311-13
46037-27
49800-07
__
__
614271-01
5930-06-10
46052-11
46052-02
11849
700649
12185-03
12185-02
__
__
__
702514-2520-08
700594
__
615482-01
2010196-29
2010196-47
2010196-28
2010196-30
699345-13
705710
705711
615851-02-01
615850-08-01
615846-16-01
615850-09-01
615846-15-01
615850-07-01
__
615846-14-01
615850-01-01
706258-12
__
__
__
__
__
615378-01
49742-17

20-3/4"
3000 psi**
Qty
1
1
1
1
1
1
4
16
16
20
20
2
24
4
2
2
36
36
1
1
1
1
1
1
1
1
1
1
1
2
1

21-1/4"
2000 psi**

Part No.
699333-47
699334-47
644172-01
699336-47
644800-47
__
__
__
__
__
__

Qty
1
1
1
1
1
2010341-18
1
__
__
663311-13
4
46037-34
12
49800-12
12
5919-08
24
2709000-18-09 24
5930-06-10
2
__
46052-15
24
46052-16
4
700649
2
12185-02
4
__
__
__
615447-01-10 24
2709000-19-09 24
__
__
__
49122-12
2010196-53
2010196-54
2010196-55
2010196-56
__
__
615399-12
615850-12-01
615851-03-01
615846-18-01
615850-11-01
615846-17-01
__
615850-10-01
__
__
__
__
__
__
__
__
__
49742-18

1
1
1
1
1
1
1
1
1
1
1
2
1

Part No.
699333-47
699334-47
644172-01
699336-47
644800-47
__
__
__
__
__
__
2010341-18
__
__
663311-13
46037-34
49800-12
6306-16-10
2709000-15-09
5930-06-10
__
46052-15
46052-16
700649
12185-02
__
__
__
615447-02-10
2709000-19-09
__
__
__
49122-12
2010196-53
2010196-54
2010196-55
2010196-56
__
__
615399-12
615851-03-01
615850-12-01
615846-18-01
615850-11-01
615846-17-01
__
615850-10-01
__
__
__
__
__
__
__
__
__
49742-18

D and DL BOP Replacement Part Kits


design will fill most voids created from excessive wear and tear to the seal
groove. Seal kits have been created which include all the operating system seals
for the annular BOPs listed below.

For popular size D and DL BOPs, a BOP replacement part kit is available to
provide all seals, bearings and scrapers required during normal maintenance.
Kit parts are shrink-film packed to prevent loss and assure long shelf life and
are less expensive than individual parts. All parts in each kit are identified with
part numbers and parts list index numbers.
As an optional replacement for the standard lip seal design, a D-shaped seal
is available for service in annular BOPs that have pitted, corroded or oversized
seal grooves. To enhance the performance life of the used annular BOP, this seal

16
17

D BOP Replacement Part Kit Part Numbers


BOP Size
7-1/16"

Pressure Rating (psi)


3000, 5000

Replacement Kit
49742-01

'D' Seal Kit


__

7-1/16"

10,000

49742-02

__

7-1/16"

15,000

49742-13

__

7-1/16"

20,000

49742-03

__

11"

3000,5000

49742-09

__

11"

10,000

49742-10

__

11"

15,000

49742-14

__

13-5/8"

5000

49742-11

2010006-01

13-5/8"

10,000

49742-12

16-3/4"

3000,5000

49742-08

2010006-05
__

18-3/4"

5000

49742-16

2010006-04

18-3/4"

10,000

49742-17

20-3/4"

3000

49742-18

2010006-03
__

21-1/4"

2000

49742-19

__

67

66

55
50

57

Replacement Part Kit Components


Item Number*
16
17
50
51
52
53
54
55
56
57
58
59
60
61
62

Quantity
1
8
1
1
1
1
1
1
1
1
1
1
2
1
1

63
64

2
1

Seal Ring
Seal Ring

65
66
67

1
1
2

Seal Ring
Seal Ring
Seal Ring

52

Description
Top Trash Seal
Actuator Screw Bearing
Inner Cylinder Head Ring
Bearing
Bearing
Bearing
Bearing
Wear Ring
Wiper Ring
Wiper Ring
Seal Ring
Seal Ring
Seal Ring
Seal Ring
Seal Ring

60
58
59
53
56
64
63

65

51

61

54

62

SD-5306

D BOP

*Item numbers are standard bill of material numbers for a complete assembly.

Higher Temperatures
For temperatures greater than 250F and high H2S levels, CAMULAR severe
service elastomer is recommended. The D BOP packing element comes only as
a complete subassembly, which includes packer and donut Contact your local
Cameron representative for details. CAMULAR part numbers are listed on
pages 48-49.

Packer

Donut
SD-5306

D BOP Packing Element Subassembly


50

S/QRC and G-2 Snubbing BOPs


Safety packers seal around tubing in the well bore. Tubing can be stripped or
snubbed through these packers, if necessary.
Wear insert packers are for stripping and snubbing service. These
subassemblies have a wear insert which can be easily replaced to renew the
packer.
Slip inserts are used to hold the tubing string after shearing or during
workover operations by supporting upward and downward forces as well as
torsional forces.
Wireline ram guides have hardened steel guiding surfaces and are
replaceable.
No special operating system is required for shearing.
All S/QRC and G-2 rams are suited for H2S service per NACE MR-01-75.

The Cameron S/QRC and G-2 snubbing blowout preventers are used in well
workover and servicing operations. S/QRCs are ram-type preventers which
maintain pressure control for all types of workover wells. The Cameron G-2 BOP
is suitable for wells requiring a 4-1/16" 5000 or 10,000 psi or 7-1/16" 5000 psi
snubbing preventer.

S/QRC and G-2 BOP Rams


Cameron S/QRC and G-2 snubbing BOPs can be equipped with the proper
rams to perform a full range of snubbing preventer operations.
Four types of ram bodies are available for the 4-1/16" 10,000, 15,000 and
25,000 psi S/QRC and 4-1/16" 5000 and 10,000 psi G-2 BOPs. These include
blind, pipe, shear and wireline rams. Pipe rams can be fitted with safety packers,
wear insert packers or slip inserts. Blind and pipe rams are available for all
sizes. Features include:

SD-10821

S/QRC Workover BOP


(Available in 3-1/16" 20,000 psi, 4-1/16" 10,000, 15,000 and 25,000 psi and 7-1/16" 20,000 psi)

SD-10822

G-2 Workover BOP


(Available in 4-1/16" 5000 and 10,000 psi and 7-1/16" 5000 psi)

51

S/QRC and G-2 BOP Rams


Wear Insert Packer
Wear Insert Subassembly

SD-5169-3

SD-5169-2

Safety Packer

SD-5169-4

Slip Insert Subassembly

Wear Insert Packer Subassembly

Pipe Ram Part Numbers


Tubing
Size

Safety Packer*
Ram Assembly**

Safety
Packer**

Pipe
Ram Body**

Top
Seal**

Wear Insert
Packer Subassembly**
__

Wear Insert
Packer**
__

Wear Insert
Subassembly**
__

Slip Insert
Subassembly**
__

Blind

46955-01

46941-01

46938

46950

1.050"

46955-02

46941-04

46940-03

46950

614267-01

614262-01

614259-01

614442-01

1.315"

46955-03

46941-03

46940-02

46950

614267-02

614262-02

614259-02

614442-02

1.660"

46955-04

46941-02

46940-01

46950

614267-03

614262-03

614259-03

614442-03

1.900"

46955-05

46942-01

46940-04

46950

614267-04

614262-04

614259-04

614442-04

2.000"

46955-06

46942-02

46940-05

46950

614267-05

614262-05

614259-05

614442-05

2.062"

46955-07

46942-03

46940-06

46950

614267-06

614262-06

614259-06

614442-06

614267-07
__

614262-07
__

614259-07
__

614442-08

2.375"

46955-08

46942-04

46939-01

46950

2.875"

46955-09

46942-05

46939-02

46950

614442-07

*Includes pipe ram body, top seal and safety packer.


**2 of each required.

Shear Blade
Upper Ram Body
Lower Ram Body
Bolt

SD-5219

Blade Retainer

Shear Ram

Shear Ram Part Numbers


(Sealing-Type Shear Ram Available for 4-1/16" and 7-1/16" 5000 psi Not Shown)

BOP BOP
Description
Description

Shear Ram Assembly*

Upper Ram Body

Lower Ram Body

Shear Blade

Blade Retainer

Qty Part Number

Qty Part Number

Qty Part Number

Qty Part Number

Bolts

Qty

Part Number

Qty

Part Number

4-1/16" 5000 and 10,000 psi G-2

614411-01

614402-02

614402-01

614413-01

614414-01

4 702585-14-00-24

4-1/16" 10,000 and 15,000 psi S/QRC

614411-01

614402-02

614402-01

614413-01

614414-01

4 702585-14-00-24

4-1/6" 25,000 psi S/QRC

644254-01

644253-01

644253-02

644252-01

644252-01

701683

*Shear ram assembly includes upper and lower shear rams.

Top Seal

Wireline Guide
Upper Ram Body
SD-10819

Wireline Packer
Lower Ram Body
Screw**

Wireline Ram

Wireline Ram Part Numbers


(4-1/16" 5000 and 10,000 psi G-2 and 4-1/16" 10,000 and 15,000 psi S/QRC)

Wireline
Size
(In.)

Wireline Ram
Assembly*
(1 Required)

Upper Ram
Body
(1 Required)

Lower Ram
Body
(1 Required)

Top
Seal
(2 Required)

Wireline
Packer
(2 Required)

Wireline
Guide
(2 Required)

0-0.250

614263-06

614236-01

614235-01

46950

46941-10

614264-01

0.312

614263-01

614236-01

614235-01

46950

46941-05

614264-01

0.438

614263-02

614236-02

614235-02

46950

46941-06

614264-02

0.562

614263-03

614236-03

614235-03

46950

46941-07

614264-03

0.750

614263-04

614236-04

614235-04

46950

46941-08

614264-04

0.875

614263-05

614236-05

614235-05

46950

46941-09

614264-05

*Wireline ram assembly includes upper and lower wireline rams.


**Screw part number: 702507-06-00-06.

52

Clamp Connections
Bearing Ring

Load Ring

SD-7039

Nut

Forged Thru-Bolt Cameron Clamp Part Numbers


Bore Size
and
Working Pressures
(psi)
1-13/16" 10,000
1-13/16" 15,000
1-13/16" 20,000
2-1/16" 5000
2-1/16" 10,000
2-1/16" 15,000
2-1/16" 20,000
2-9/16" 5000
2-9/16" 10,000
2-9/16" 15,000
2-9/16" 20,000
3-1/8" 5000
3-1/8" 10,000
3-1/8" 15,000
3-1/8" 20,000
4-1/16" 5000
4-1/16" 10,000
4-1/16" 15,000
4-1/16" 20,000
7-1/16" 2000
7-1/16" 5000 (RX)
7-1/16" 5000 (BX)
7-1/16" 10,000 (RX)
7-1/16" 10,000 (BX)
7-1/16" 15,000 (RX)
7-1/16" 15,000 (BX)
7-1/16" 20,000
9" 5000
9" 10,000
11" 3000
11" 5000
11" 10,000
11" 15,000
13-5/8" 3000
13-5/8" 5000
13-5/8" 10,000
13-5/8" 15,000
16-3/4" 2000
16-3/4" 3000
16-3/4" 5000
16-3/4" 10,000
18-3/4" 10,000
18-3/4" 15,000
18-3/4" 15,000 (HBC)
20-3/4" 2000
20-3/4" 3000
21-1/4" 2000
21-1/4" 5000
21-1/4" 7500
21-1/4" 10,000
24-1/4" 1000
30-1/2" 1000
34" 1000
36" 1000

Seal
Ring
Number
RX
20
20
__
23
23
23
__
24
24
24
__
27
27
27
__
35
35
__
__
45
45
__
45
__
45
__
__
49
49
53
53
__
__
57
57
57
__
65
65
__
__
__
__
__
73
73
73
__
__
__
__
__
__
__

BX
151
151
151
152
152
152
152
153
153
153
153
154
154
154
154
155
155
155
155
__
__
156
__
156
__
156
156
157
157
__
158
158
158
__
160
159
159
__
__
161
162
164
164
164
__
__
__
165
166
166
__
__
__
__

AX
__
__
__
__
__
__
__
__
__
__
__
41700-27
__
41700-25
__
__
41700-24
__
__
__
41700-02
__
__
__
__
__
__
__
__
41700-06
__
41700-08
__

CX
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__

41700-11
41700-13
41700-15 13
__
13
41700-17 __
__
__
41700-19 __
__
__
__
18
__
18
__
18
__
__
__
__
__
__
__
21
__
21
__
21
__
__
__
__
__
__
__
__

Clamp
Assembly
Part No.

Clamp
Part No.
644021
(2 Reqd)

Bolt
Part No.
(4 Reqd)

615236-01
615236-02
615236-03
615236-01
615236-02
615236-03
615236-03
615236-02
615236-04
615236-03
615236-06
615236-04
615236-05
615236-06
615236-08
615236-05
615236-06
615236-08
615236-10
615236-25
615236-07
615236-08
615236-08
615236-10
615236-10
615236-22
615236-15
615236-08
615236-10
615236-09
615236-10
615236-22
615236-15
615236-11
615236-13
614925-03
614925-03
615236-12
615236-14
615236-19
615236-28
645490-01
645490-01
645490-01
615236-18
615236-18
615236-18
614925-02
614925-02
614925-02
615236-21
615236-20
615236-24
615236-23

()-01
()-02
()-03
()-01
()-02
()-03
()-03
()-02
()-04
()-03
()-06
()-04
()-05
()-06
()-08
()-05
()-06
()-08
()-10
()-25
()-07
()-08
()-08
()-10
()-10
()-22
()-15
()-08
()-10
()-09
()-10
()-22
()-15
()-11
()-13
()-15
()-28
()-12
()-14
()-19
()-28
()-27
()-26
()-32
()-18
()-18
()-18
()-27
()-26
()-26
()-21
()-20
()-24
()-23

5912-60-10
702533-08-10-80
702533-09-10-90
5912-60-10
702533-08-10-80
702533-09-10-90
702533-09-10-90
702533-08-10-80
702533-09-10-82
702533-09-10-90
709949
702533-09-10-82
702533-09-10-82
709949
702533-13-11-32
702533-09-10-82
702533-10-10-93
702533-13-11-32
702533-14-11-61
702533-08-10-82
702533-12-11-20
702533-13-11-32
702533-13-11-32
702533-14-11-61
702533-14-11-61
702533-19-11-80
702533-21-11-91
702533-13-11-32
702533-14-11-61
702533-12-11-30
702533-14-11-61
702533-19-11-80
702533-21-11-91
702533-12-11-50
702533-19-12
702533-21-11-91
702533-25-12-60
702533-12-11-50
702533-14-11-81
702533-21-12-32
702533-25-12-60
707902
709446
644970-01-00-01
702533-19-12-00
702533-19-12-00
702533-19-12-00
707902
709446
709446
702533-11-11-50
702533-13-11-70
702533-14-11-80
702533-19-12-12

Studs are hydraulically tensioned. Contact Cameron for details.


*4 required.

53

Nut
Part No.
(8 Reqd)
2709000-09-01
2709000-09-01
2709000-10-01
2709000-09-01
2709000-09-01
2709000-10-01
2709000-10-01
2709000-09-01
2709000-10-01
2709000-10-01
12955-53-10
2709000-10-01
2709000-10-01
12955-53-10
2709000-14-01
2709000-10-01
12955-53-10
2709000-14-01
2709000-15-01
2709000-09-01
2709000-13-01
2709000-14-01
2709000-14-01
2709000-15-01
2709000-15-01
2709000-19-01
2709000-20-01
2709000-14-01
2709000-15-01
2709000-13-01
2709000-15-01
2709000-19-01
2709000-20-01
2709000-13-01
2709000-19-01
2709000-20-01
49800-11
2709000-13-01
2709000-15-01
2709000-20-01
49800-11
713034
644076-01
645015-01
2709000-19-01
2709000-19-01
2709000-19-01
713034
644076-01
644076-01
2709000-12-01
2709000-14-01
2709000-15-01
2709000-19-01

Load Ring
Part No.
(8 Reqd)
697491-05
697491-05
697491-06
697491-05
697491-05
697491-06
697491-06
697491-05
697491-06
697491-06
697491-07
697491-06
697491-06
697491-07
697491-10
697491-06
697491-07
697491-10
697491-11
697491-05
697491-09
697491-10
697491-10
697491-11
697491-11
697491-12
697491-04
697491-10
697491-11
697491-09
697491-11
697491-12
697491-04
697491-09
697491-12
697491-04
697491-01
697491-09
697491-11
697491-04
697491-01
697491-03
697491-02
697491-14*
697491-12
697491-12
697491-12
697491-03
697491-02
697491-02
697491-08
697491-10
697491-11
697491-12

Bearing Ring
Part No.
(8 Reqd)
697492-05
697492-05
697492-06
697492-05
697492-05
697492-06
697492-06
697492-05
697492-06
697492-06
697492-07
697492-06
697492-06
697492-07
697492-10
697492-06
697492-07
697492-10
697492-11
697492-05
697492-09
697492-10
697492-10
697492-11
697492-11
697492-12
697492-04
697492-10
697492-11
697492-09
697492-11
697492-12
697492-04
697492-09
697492-12
697492-04
697492-01
697492-09
697492-11
697492-04
697492-01
697492-03
697492-02
697492-14*
697492-12
697492-12
697492-12
697492-03
697492-02
697492-02
697492-08
697492-10
697492-11
697492-12

Safety Hoist
2
Reqd
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__

4** or
6*** Reqd
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
__
708153***
__
__
__
__

708153***
708153***
708152 708153**
708152 708153**
__
__
__
708153***
__
708153***
__
708153***
708152 708153**
708152 708153**
__
708153***
708152 708153**
708152 708153**
__
708152***
__
708153***
__
708153***
708152 708153**
__
708152***
__
708152***
__
708152***
__
708152***
708152 708153**
708152 708153**
708152 708153**
__
708152***
__
708152***
__
708152***
__
708153***
__
708152***
__
708152***
__
708152***

Cameron
Wrench
Part No.
713114-01
713114-01
713114-04
713114-01
713114-01
713114-04
713114-04
713114-01
713114-04
713114-04
713114-05
713114-04
713114-04
713114-05
713114-08
713114-04
713114-05
713114-08
713114-09
713114-01
713114-07
713114-08
713114-08
713114-09
713114-09
713114-13
713114-14
713114-08
713114-09
713114-07
713114-09
713114-13
713114-14
713114-07
713114-13
713114-14
__
713114-07
713114-09
713114-14
__
__
__
__
713114-13
713114-13
713114-13
__
__
__
713114-06
713114-08
713114-09
713114-13

Manufacturing and Aftermarket Facilities


WESTERN HEMISPHERE
Canada
Cooper Cameron Corporation
Cooper Cameron Ltd.
5003 93rd Street
Edmonton, Alberta T6E 5S9
Canada
Tel: (403) 434-3476
Fax: (403) 437-7397
Mexico
Cooper Cameron de Mexico,
S.A. de C.V.
P.O. Box MEB-MX17-390
Veracruz, Ver.
Mexico C.P, 91707
Tel: 011+ 522+981-1008
Fax: 011+ 522+981-1009
South America
Cameron Argentina S.A.I.C.
Av. Antartida Argentina 2711
2800 Zarate
Pica., Buenos Aires
Repulica Argentina
Tel: 011+54+487+22297
Fax: 011+54+487+23404
United States
Cameron
600 East 57th Place
Anchorage,
Alaska 99518-5761
Tel: (907) 562-2332
Fax: (907) 562-3880
Cameron
P.O. Box 457
Berwick, Louisiana 70392
Tel: (504) 395-6171
Fax: 504) 395-9350
Cameron
P.O. Box 457
Highway 90 East
Patterson, Louisiana 70392
Tel: (504) 395-6171
Fax: (504) 395-1297
Cameron
No. 6 Holloway Blvd.
Ville Platte, Louisiana
70586-9778
Tel: (318) 363-7500
Fax: (318) 363-7516

Cameron
4341 S.W. 33rd Street
Oklahoma City, Oklahoma
73119
Tel: (405) 682-1661
Fax: (405) 682-1051

Germany
Cameron GmbH
P.O. Box 3225
29232 Celle, Germany
Tel: 011+49+5141+8060
Fax: 011+49+5141+806333
Ireland
Cameron Ireland Limited
Aghafad, Longford
Republic of Ireland
Tel: 011+353+43+45301
Fax: 011+353+43+41560

Cameron Elastomer
Technology
29501 Katy Freeway
Katy, Texas 77450
Tel: (281) 391-4600
Fax: (281) 391-4640

Nigeria
Cooper Cameron Corp.
Nigeria
Plot 45 Trans Amadi Ind.
Layout
P.M.B. 995
Port Harcourt, Nigeria
Tel: 011+234+84+331264
Fax: 011+2341-2694003

Cameron
P.O. Box 10286
Highway 90 @ FM 1909
Liberty, Texas 77575
Tel: (409) 336-8811
Fax: (409) 336-2822

EASTERN HEMISPHERE
Austria
Canada Works
Dorenkampgasse 3
P.O. B. 24
A-1107 Vienna, Austria
Tel: 011+43+1+682-131
Fax: 011+43+1+682-133;

Cooper Cameron Corp.


Nigeria
Ogunu Road
P.M.B. 1066
Warri, Nigeria
Tel: 011+871+685052494
Fax: 011+871+6850524946

England
Cooper Cameron (U.K.) Ltd.
Queen Street, Stourton
Leeds, West Yorkshire
LS10 1SB England
Tel: 011+44+113+2701144
Fax: 011+44+113+7276778

Norway
Cameron Norway A/S
P.O. Box 66
5364 Agotnes
Bergen, Norway
Tel: 011+47+55+334710
Fax: 011+47+5+334593

France
Cameron France, S.A.
Plaine Saint-Pierre
CS 620
34535 Beziers Cedex,
Beziers, France
Tel: 011+33+67+111500
Fax: 011+33+67+111600

Cameron Norway A/S


Mekjarvik 1
4070 Randaberg
Stavanger, Norway
Tel: 011+47+51+415000
Fax: 011+47+51+418160
Scotland
Cameron (Great Britain) Ltd.
Badentoy Industrial Park
Badentoy Avenue
Portlethen, Aberdeen
AB1 4YB Scotland
Tel: 011+44+1224+282000
Fax: 011+44+1224+781800

Gabon
Cameron Gabon S.A.
B.P. No. 869
Port Gentil
Republique Gabonaise
Tel: 011+241+553026
Fax: 011+241+555897

54

The Netherlands
Cameron B.V.
P.O. Box 121, 9600 AC
Produktieweg 14, 9601 MA
Hoogezand, The Netherlands
Tel: 011+31+598+396200
Fax: 011+31+598+396298

ASIA PACIFIC/MIDDLE
EAST
Australia
Cameron Australia Pty. Ltd.
P.O. Box 519
Cheltenham 3192
Melbourne, Victoria, Australia
Tel: 011+61+39+584-3100
Fax: 011+61+39+584-6658
Cameron Australia Pty. Ltd.
P.O. Box 1475
Canning Vale 6155
Perth Western Australia 6155
Tel: 011+61+9+455-3655
Fax: 011+61+9+455-3636
Singapore
Cameron (Singapore) Pte. Ltd.
No. 2 Gul Circle
Jurong Industrial Estate
Locked Bag Service No. 3
Jurong Town Post Office
Singapore 2262
Republic of Singapore
Tel: 011+65+861-335
Fax: 011+65+861-6197

Sales Offices
WESTERN HEMISPHERE
Canada
Cooper Cameron Corporation
Cooper Cameron Ltd.
600, 715 - 5th Avenue S.W.
Calgary, Alberta T2P 2X6
Canada
Tel: (403) 261-2800
Fax: (403) 262-5181
Cooper Cameron Corporation
Cooper Cameron Ltd.
8614 112 Street
Grande Prairie,
Alberta T8V 5X4
Canada
Tel: (403) 539-2333
Fax: (403) 539-2334
Mexico
Cooper Cameron de Mexico,
S.A. de C.V.
Calle 37 No. 147-A
Col. Hector Perez Martinez
24100 Ciudad Del Carmen
Camp Mexico
Tel: 011+ 52+938-27924
Fax: 011+ 52+938-27924
Cooper Cameron de Mexico,
S.A. de C.V.
Avenida Homero 1804,
Ste 403
Co. Chapultec Morales
11510 Mexico D.F.
Tel: 011+52+5+5800296
Fax: 011+52+5+395-8869
Cooper Cameron de Mexico,
S.A. de C.V.
Paseo Villahermosa 701-37
Seccion Lomas
Fracc. Plaza Villahermosa
86179 Villahermosa,
Tabasco Mexico
Tel: 011+52+93-513484
Fax: 011+52+93-513484
South America
Cameron Argentina
Cerrito 1070, Piso 2
1010 Buenos Aires, Argentina
Tel: 011+54+811+4000
Fax: 011+54+811+4009

Cameron
Balfer Ltd.
Zona Franca
P.O. Box 117-D
Punta Arenas, Chile
Tel: 011+56+61+213931
Fax: 011+56+61+214379

Cameron
P.O. Box 114
Mt. Pleasant, Michigan 48858
Tel: (517) 772-5555
Fax: (517) 773-2842

Cameron Venezolana S.A.


Apartado 1467
Maracaibo, Venezuela 4001-A
Tel: 011+58+61+347231
Fax: 011+58+61+349559
Ingram Cactus Ltd.
C/o Lifkin De Venezuela
S.A. Carret A. Perija KM 15
Maracaibo, Venezuela
Tel: 011+58+62+47001
Fax: 011+58+61+360087

Cameron
1020 Hillcrest Drive
Laurel, Mississippi 39440
Tel: (601) 649-8900
Fax: (601) 649-8909
Cameron
5729 Leopard Street, Bldg. 9
Corpus Christi, Texas 78408
Tel: (512) 289-1455
Fax: (512) 289-6251
Cameron
1505 Elm Street, Suite 950
Dallas, Texas 75201
Tel: (214) 855-7823
Fax: (214) 855-0033

United States
Cameron
P.O. Box 3545
Bakersfield, California 93385
Tel: (805) 323-8297/8183
Fax: (805) 323-8595

Cameron
P.O. Box 1212
Houston, Texas 77251-1212
Tel: (713) 939-2211
Fax: (713) 939-2620

Cameron
1238 Alice Street, A
Woodland, California 95695
Tel: (916) 666-4144
Fax: (916) 666-5916
Cameron
1700 Broadway, Suite 1400
Denver, Colorado 80290-1401
Tel: (303) 861-1850
Fax: (303) 837-0408
Cameron
201 Energy Center Parkway,
Suite 402
Lafayette, Louisiana 70508
Tel: (318) 235-0051
Fax: (318) 233-8659 (sales)
(318) 981-3322 (service)
Cameron
650 Poydras St.
Poydras Center, Suite 2310
New Orleans, Louisiana 70130
Tel: (504) 529-7634
Fax: (504) 522-8837

55

Cameron
P.O. Box 1311
Longview, Texas 75606
Tel: (903) 236-4884
Fax: (903) 234-0336
Cameron
415 W. Wall, Suite 102
Midland, Texas 79702
Tel: (915) 682-4688
Fax: (915) 682-4692
Cameron
270 So. Grandview
Odessa, Texas 79761
Tel: (915) 337-5475
Fax: (915) 337-3001
Cameron
P.O. Box 2229
Mills, Wyoming 82644
Tel: (307) 472-0222
Fax: (307) 265-1318

Cameron
P.O. Box 901
Evanston, Wyoming
82931-0901
Tel: (307) 789-2665
Fax: (307) 789-4734
Cameron
240 Industrial Boulevard
Rock Springs, Wyoming 82901
Tel: (307) 382-3134
Fax: (307) 382-3190
Cameron
P.O. Box 1463
1336 East 335 South
Vernal Utah 84078
Tel: (8091) 789-1778
Fax: (801) 789-1739

EASTERN HEMISPHERE
Congo
Cameron France
Antenne de Point-Noire
B.P. 5491 Cote Sauvage
Pointe-Noire Congo
Tel: 011+242+945563
Fax: 011+242 +940283
Egypt
Cameron
Villa El Baraka
No. 8 Road 279
New Maadi
Cairo, Egypt ARE
Tel: 011+202+352-0193
Fax: 011+202+352-0495
England
Cooper Cameron (U.K.) Ltd.
Unit 11, Brinell Way
Harfreys Industrial Estate
Great Yarmouth, Norfolk
NR31 OLU England
Tel: 011+44+1493+440438
Fax: 011+44+493+655405
Ingram Cactus Ltd.
Shuttleworth Close
Gapton Hall Industrial Estate
Great Yarmouth
Norfolk NR31 ONQ England
Tel: 011+44+1493+440444
Fax: 011+44+493+440254

Sales Offices
Cooper Cameron (U.K.) Ltd.
205 Holland Park Avenue
London W11 4XB England
Tel: 011+44+171+602-0888
Fax: 011+44+171+602-7228
Ingram Cactus Ltd.
Plexzus House
1 Cromwell Place
London SW72JE England
Tel: 011+44+171+225-2281
Fax: 011+44+171+225-2181
France
Cameron France, S.A.
19 bis, Blvd. dArgenson
92200 Neuilly-Sur-Seine
Paris, France
Tel: 011+33+1+4643-9200
Fax: 011+33+1+4643-9202
Cameron France, S.A.
15, Ave du General De Gaulle
64000 Pau, France
Tel: 011+33+59+807640
Fax: 011+33+59+807649
Gabon
Cameron Gabon S.A.
B.P. No. 869
Port Gentil
Republique Gabonaise
Tel: 011+241+553026
Fax: 011+241+555897
Nigeria
Cooper Cameron Corp.
Nigeria
18B Thompson Avenue
Ikoyi
Lagos, Nigeria
Tel: 011+2341-2694003
Fax: 011+2341-2694003
Russia
Cooper Cameron Corporation
Per. Sadovskikh, 4
Apt. 12
Moscow 103001, Russia
Tel: 011+7+502+221-3422
Fax: 011+7+502+221-3010

Scotland
Ingram Cactus Ltd.
Wellheads Crescent
Dyce Industrial Park
Dyce AB2 OGA
Aberdeen, Scotland
Tel: 011+44+1224+724226
Fax: 011+44+1224+7242

Malaysia
Cameron Excel Sdn Bhd
Warehouse 11
Kemaman Supply Base
24007 Kemaman
Terengganu, Malaysia
Tel: 011+60+9+86311198
Fax: 011+60+9+8631196

Qatar
Cameron
c/o AlAhed Trading and
Construction Co. Ltd.
P.P. Box 3266
Doha, Qatar
Tel: 011+974+410797
Fax: 011+974+411582

The Netherlands
Cameron B.V.
Sweelinckplein 11
2517 GK
The Hague, The Netherlands
Tel: 011+31+70+365-7904
Fax: 011+31+70+364-5941

Cameron Excel Sdn Bhd


20.04, 20th Floor
Menara Promet
Jalan Sultan Ismail
50250 Kuala Lumpur,
Malaysia
Tel: 011+60+3+241+6933
Fax: 011+60+3+241+8922

Saudi Arabia
Cameron
c/o Al Rushaid Trading Co.
P.O. Box 540
Dhahran Airport 31932
Al Khobar
Saudi Arabia
Tel: 011+966+3+898-0028
Fax: 011+966+3+894-6426

ASIA PACIFIC
Indonesia
Cameron (Singapore) Pte. Ltd.
c/o P.T. Imeco
Jalan Ampera Raya No. 9 & 10
Cilandak Timur
Jakarta #12550 Indonesia
Tel: 011+62+21+780-8090
Fax: 011+62+21+780-8064
Japan
Cameron/CCV
Fuundo Annex Bldg., 3rd Floor
4-2, Kanda Ogawa-Machi
1-Chome Chiyoda-Ku
Tokyo 101 Japan
Tel: 011+81+3+3252-8434
Fax: 011+81++3+32525438
New Zealand
Cameron
P.O. Box 672
Papakura, New Zealand
Tel: 011+64+9+299-8103
Fax: 011+64+9+299-8103

Cameron Excel Sdn Bhd


Lot 2244 Pujut 6 1/2
JLN Pujut.Lutong Road
9800 Miri Sarawak
East, Malaysia
Tel: 011+60+85+657335
Fax: 011+60+85+656335
Cameron Excel Sdn Bhd
C-O 2MC Asian Supply Base
Ranca Ranca Industries
Lubuan Federal Territory
Malaysia
Tel: 011+60+87+413914
Fax: 011+60+87+415921
Ingram Cactus (Malaysia)
Sdn. Bhd.
P.O. Box 7170
40706 Shah Alam
Selangor Darul Ehsan Malaysia
Tel: 011+60+3+550-8850
Fax: 011+60+3+550-4772
Oman
Cooper Cameron Corporation
c/o Oman United Agencies
LLC
P.O. Box 985
Postal Code 112
Muscat 112
Sultanate of Oman
Tel: 011+968+591608
Fax: 011+968+593980

MIDDLE EAST
Brunei
Cameron Sdn. Bhjd.
c/o Syarikat Rajah Sdn Bhd
P.O. Box 177
Kuala Belait 6001
Negara Brunei Darussalam
Tel: 011+673+3+222613
Fax: 011+673+3+224284

56

UAE
Cameron
P.O. Box 3555
Abu Dhabi, U.A.E.
Tel: 011+971+2+541313
Fax: 011+971+2+541441
Ingram Cactus Ltd.
P.Ol. Box 43966
Abu Dhabi, U.A.E.
Tel: 011+971+2+723648
Fax: 011+971+2+782293

CAMERON AND COOPER CAMERON VALVES TERMS AND CONDITIONS OF SALE


1. CONTRACT ACCEPTANCE:
Any written or oral purchase order received from Buyer by Cooper Cameron Corporation, Cameron
Division and Cooper Cameron Valves (Seller) shall be construed as a written acceptance of Sellers offer
to sell and shall be filled in accordance with the terms and conditions of sale set forth herein. SELLERS
ACCEPTANCE OF THIS ORDER IS EXPRESSLY CONDITIONED ON BUYERS ASSENT TO THE TERMS CONTAINED HEREIN. The terms and conditions of Sellers proposal (if any) and acknowledgement shall prevail
over any conflicting or different terms in Buyers order unless Buyer notifies Seller in writing of its objections thereto within fifteen (15) days from receipt of Sellers acknowledgement. Buyers standard terms of
purchase will not be considered a counteroffer to Sellers terms and conditions of sale. The failure of Seller
to object to any provision in conflict herewith whether contained on Buyers purchase order or otherwise
shall not be construed as a waiver of the provisions hereof nor as an acceptance thereof.
2. QUOTATIONS AND PRICES:
All quotations are made for prompt acceptance and any terms quoted therein are subject to change without notice
after thirty (30) days from the date quoted unless specifically stated otherwise on the quotation. Any product, service capability or manufacturing capability which may be available at the time a quotation is made is subject to
prior sale. Prices quoted are valid for thirty (30) days unless specifically stated otherwise on the quotation and are
subject to change without notice. The price in effect at the time of shipment including any escalation formula will
apply, unless a valid quotation or written agreement to the contrary exists between Buyer and Seller. All prices
shown are in U.S. dollars and are F.O.B. Seller s shipping point. Any documentation pertaining to traceability
requirements for raw materials or products or documentation required for any routine or special processes must be
identified by the Buyer at the time of quotation (if any) or at the time of order placement.

3. TAXES:

its option and its own expense, to answer such claim or threat of suit, assume the control of the defense of said
suit, and settle or compromise same in any way Seller sees fit. Other than court-awarded judgments as aforesaid
Seller shall not be liable for any delays, loss of use or for other direct, indirect, incidental or consequential damages
incurred by reason of any such judgment. Seller does not warrant that such material or apparatus (a) will not
infringe any such patent when not manufactured by or for Seller or when specially made in whole or in part to the
Buyers design specification and such infringement arises from the inclusion of such specified design or (b), if used
or sold in combination with other material or apparatus, or if used in the practice of a process, will not, as a result
of such combination or use, infringe any patent covering such combination or process; and Seller shall not be liable
for and does not indemnify Buyer for damages or losses of any nature whatsoever resulting from actual or alleged
patent infringement arising pursuant to (a) or (b) above.

11. SELLERS RIGHT TO MANUFACTURE:


Seller in its sole discretion shall have the right to manufacture the products provided hereunder as far in advance
of its estimated shipping schedule as it deems appropriate. Seller expressly reserves the right to change or modify
the design and construction of any product in due course of Sellers manufacturing procedure without incurring
any obligation or liability to furnish or install such changes, modifications or improvements to products previously
or subsequently sold.

12. ENGINEERING AND SERVICE:


Upon request, Seller will provide engineering and/or technical information regarding its products and their uses
and, if feasible, will provide personnel to assist Buyer in effecting field installations and/or field service. Any such
information, service or assistance so provided, whether with or without charge, shall be advisory only. In that
regard, neither Seller nor Buyer assumes any liability for the acts or omissions of the other party except as may be
provided in these terms.

Any tax or other charge imposed by law on the sale or production of goods or the performance of services shall
be paid by the Buyer, unless the law specifically provides that such payment must be made by Seller, in which case
Buyer shall reimburse Seller for such payment as part of the purchase price. Custom duties, consular fees, insurance charges and other comparable charges will be borne by Buyer.

13. LABOR STANDARDS:

4. SHIPPING SCHEDULE AND DELIVERY:

14. INSPECTION:

Shipment schedules are given as accurately as conditions permit and every effort will be made to make shipments
as scheduled. Seller will not be responsible for deviations in meeting shipping schedules nor for any losses or damages to Buyer (or any third party) occasioned by deviations in the shipping schedule, whether due to Acts of God,
orders bearing priority ratings established pursuant to law, differences with workmen, local labor shortages, fire,
flood, shortages or failure of raw materials, supplies, fuel, power or transportation, breakdown of equipment or
any other causes beyond Sellers reasonable control, whether of similar or dissimilar nature than those enumerated. Seller shall have additional time within which to perform as may be reasonably necessary under the circumstances and shall have the right to apportion its production among its customers in such a manner as it may consider to be equitable. Seller reserves the right to furnish commercially equivalent or better substitutes for materials
or to subcontract the Buyers order or portions thereof as Seller deems necessary. In no event shall Seller be liable
for any consequential damages for labor resulting from failure or delay in shipment. If Buyer requires drawings, procedures, standards or similar material for approval, shipping schedules will be calculated from the time such
approvals are received by Seller, since shipping schedules are based on Seller having all required information and a
firm order from Buyer which is enterable into production. Any hold points, witness points or the need for inspection by Buyers representatives must be identified by Buyer at the time of quotation (if any) and/or order placement
in order that the effect on the prices or shipping schedules (if any) can be taken into account. Additional inspection or testing required by Buyer which affects normal production sequence will be considered as extending the
shipping dates accordingly.

Unless otherwise agreed in writing, final inspection and acceptance of products must be made at Sellers plant or
other shipping or receiving point designated by Seller and shall be conclusive except as regards latent defects.
Buyers representatives may inspect at the Sellers plant or shipping point during working hours prior to shipment
in such manner as will not interfere with operations.

5. MINIMUM BILLING:
Seller reserves the right to impose a minimum billing charge on all sales, change orders or order supplements.

6. TERMS OF PAYMENT:
Terms of payment for all materials and service are 30 days from invoice date, at net price, provided satisfactory
credit has been established. All unpaid invoices are subject to the maximum legal interest rate per annum commencing with the due date.

7. CANCELLATIONS AND RETURNS:


Purchase orders once placed by Buyer and accepted by Seller can be canceled only with Sellers written consent
and upon terms which will save Seller from loss. No products may be returned for credit or adjustment without
written permission from Sellers office authorized to issue such permission.

8. WARRANTIES:
All products of Sellers manufacture are warranted against defects of material and workmanship for a period of
twelve (12) months from the date of installation or eighteen (18) months from date of shipment, whichever period first expires, when such products are used in the service and within the pressure range for which they were
manufactured. In the case of products or parts not wholly of Sellers manufacture, Sellers liability shall be limited
to the extent of its recovery from the manufacturer of such products or parts under its liability to Seller.
Any repair work performed by Seller is warranted for one year from completion of such repairs and applies only
to work performed.
If, within these specified periods, Seller receives notice from Buyer of any alleged defect in or nonconformance
of any product or repair and if in the Sellers sole judgment the product or repair does not conform or is found to
be defective in material or workmanship, then, Buyer shall, at Sellers request, return the part or product F.O.B. to
Sellers designated plant or service location. Seller, at its option and expense, shall repair or replace the defective
part or product, or repay to Buyer the full price paid by Buyer for such defective part, repair or product. Any repayment of purchase price shall be without interest.
Sellers warranty liability, including defects caused by Sellers negligence, shall be limited to such repair, replacement or refund, and shall not include claims for labor costs, expenses of Buyer resulting from such defects, recovery under general tort law or strict liability or for damages resulting from delays, loss of use, or other direct, indirect, incidental or consequential damages of any kind. Seller will not be responsible for failures of products which
have been in any way tampered with or altered by anyone other than an authorized representative of Seller, failures due to lack of compliance with recommended maintenance procedures or products which have been repaired
or altered in such a way (in Seller s judgment) as to affect the products adversely. THIS WARRANTY IS EXPRESSLY
IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE WHICH EXCEED THE FOREGOING WARRANTY.

9. NUCLEAR SALES:
The products sold hereunder are not designed or manufactured for use in or with any atomic installation or activity. If the Buyer or ultimate user of these products intends to use them in such an installation or activity, Sellers
Nuclear Terms of Sale shall be part of and control this contract. Seller will furnish Buyer with a copy of its Nuclear
Terms of Sale upon request.

10. PATENT INFRINGEMENT:


Seller warrants that the use or sale of material or apparatus sold or rented by it to Buyer hereunder will not infringe
United States patents of others covering such material or apparatus by itself, and hereby agrees to indemnify Buyer
against judgment for damages for such infringement of any such patent, provided that Buyer shall, upon receipt
of any claim for infringement of any such patent or threat of suit for such infringement or upon the filing of any
suit for infringement, whichever comes first, promptly notify Seller in writing and afford Seller full opportunity, at

CAM/T&C/US/96
REV. 2/96

Seller hereby certifies that these products were produced in accordance with all applicable requirements of Section
6, 7 and 12 of the Fair Labor Standards Act as amended and of regulations and orders of the United States
Department of Labor issued under Section 14 thereof.

15. TITLE:
Title to the products sold hereunder passes to Buyer upon payment of the full purchase price.

16. TRANSPORTATION CHARGES, ALLOWANCES, CLAIMS:


All prices are F.O.B. Sellers plant or other designated shipping point.
No freight is allowed unless stated in Sellers quotation (if any) or in a written contract which may exist between
Seller and Buyer at the time of shipment. If Sellers quotation or a written contract states that all or a portion of
freight is allowed, all prices are F.O B. Sellers plant or other designated shipping point, with most economical surface transportation allowed. If the quoted or contractual price includes transportation, Seller reserves the right to
designate the common carrier and to ship in the manner it deems most economical. Added costs due to special
routing requested by the Buyer are chargeable to the Buyer. Under no circumstances is any freight allowance which
is absorbed by Seller to be deducted from the selling price. If the quoted price or contract includes transportation,
no deduction will be made in lieu thereof whether Buyer accepts shipment at plant, warehouse, freight station, or
otherwise supplies its own transportation. When sales are made from the Sellers warehouse, Seller reserves the
right to charge either actual or pro-rated freight from Sellers principle point of manufacture to Sellers warehouse.
Buyer assumes risk of loss upon delivery to the carrier, regardless of who pays shipping costs.
Seller endeavors to pack or prepare all shipments so that they will not break, rust or deteriorate in transit, but
does not guarantee against such damage. Unless requested in writing by the Buyer, no shipments are insured by
Seller against damage or loss in transit. Seller will place insurance as nearly as possible in accordance with Buyers
written instructions but in such case Seller acts only as agent between the insurance company and the Buyer and
assumes no liability whatsoever.
Any claims for shipping loss, breakage or damage (obvious or concealed) are Buyers responsibility and should be
made to the carrier. All claims regarding shortages must be made within thirty (30) days from receipt of shipment
and must be accompanied by the packing list(s) covering the shipment.

17. CONSULAR INVOICES:


Consular fees for legalizing invoices, stamping bills of lading, or other documents required by the laws of any country or destination are not included in quotations or selling prices. If instructed in writing, Seller will make arrangements for consular documents and declarations as agent of the Buyer, but Seller assumes no liability whatsoever
as a result of making such arrangements. Seller assumes no responsibility for any fines or other charges imposed
due to errors or incorrect declarations.

18. INDEMNIFICATION AND LIMITATION OF LIABILITY:


A. INDEMNIFICATION:
Seller agrees to indemnify Buyer and hold Buyer harmless against any claims, demands or causes of action for property damage or personal injury (including death) caused by the negligent act or omission of any employee, agent
or subcontractor of Seller and not contributed to by the negligence of Buyer, its employees, its agents or any third
party. Seller shall not be responsible for the acts and workmanship of employees, agents, contractors or subcontractors of Buyer or any third party, nor for failure or malfunction of any tools, materials, equipment, products, supplies, facilities or devices not manufactured and supplied by Seller. Buyer agrees to hold Seller harmless from any
and all losses, claims, or damages arising from subsurface damage, surface damage caused by subsurface damage,
loss of hydrocarbons and from pollution, regardless of whether such damages, losses or claims were caused by the
negligence or sole negligence of Seller, it being the intent of the parties that this indemnity shall apply to property of Buyer or to that of any third party.
B. LIMITATION OF LIABILITY:
UNDER NO CIRCUMSTANCES SHALL SELLER BE LIABLE FOR ANY SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING, BUT NOT LIMITED TO LOSS OF ANTICIPATED PROFITS, LOSS OF USE OF EQUIPMENT OR OF
ANY INSTALLATION, SYSTEM OR FACILITY INTO WHICH SELLERS EQUIPMENT MAY BE LOCATED OR AT WHICH
SELLER, ITS AGENT OR SUBCONTRACTOR MAY BE PERFORMING WORK. Sellers total responsibility for any claims,
damages, losses or liabilities arising out of or related to its performance of this contract or the products or services
covered hereunder shall not exceed the purchase price.

19. MODIFICATION, RESCISSION & WAIVER:


The terms herein may not be modified or rescinded nor any of its provisions waived unless such modification, rescission or waiver is in writing and signed by an authorized employee of Seller at its office in Houston, Texas.
Failure of Seller to insist in any one or more instances upon the performance of any of the terms and conditions
of the contract or the failure of Seller to exercise any of its rights hereunder shall not be construed as a waiver or
relinquishment of any such term, condition, or right hereunder and shall not affect Sellers right to insist upon strict
performance and compliance with regard to any unexecuted portions of this contract or future performance of
these terms and conditions.
All orders must be accepted by an authorized employee of Seller. The rights and duties of the parties and construction and effect of all provisions hereof shall be governed by and construed according to the internal laws of
the State of Texas. Any disputes which arise under this agreement shall be venued in the District Court of Harris
County, Texas or in the Southern District of Texas.

CAM-523-F

PO Box 1212
Houston Texas 77251-1212
Tel 713 939 2211
Fax 713 939 2620
http://www.camerondiv.com

Cooper Cameron Corporation Cameron Division Printed in USA 12/96 TG7.5M TC1001 WR4393

Anda mungkin juga menyukai