Replacing the solenoids requires first cleaning the Solenoids manifold with Alcohol so any and all oil, dust debris is completely removed so they will not corrupt the new solenoids when mounted.
Tools Needed:
1) 2) 3) 4) 5) 6) 7) Masking Tape & Pen Small Straight Screw Driver 2.5mm Allen Wrench 3.0mm Allen Wrench 70% Isopropyl Alcohol Small Adjustable Wrench Bowl or Small Basin
Step 1; Removing the Shell Depressurize the air compressor and disconnect Power cord on the machine. Disconnect the air tubes to the machine it is recommended to replace any tube you cannot see through to ensure no latent oil residue still lodged in the tubes can enter the air system. Remove the top cover panel of the CAMS machine, locate and remove the 6 Phillip screws along the top of the machine.
Once the New solenoids are mounted and all tubes are connected, remount the top cover panel.