METRIC
H P L1 A B
10 to 15
ISO 8678; DIN 603; JIS B 1171 H Thread Length <=125 Ref 18 22 26 30 38 46 35-50mm: 1.25 130-160mm: 2.0 L1 Thread Length >125 & <=200 Ref 28 32 36 44 52
Head Square Depth Diameter Max 3 3 4 4 5 5 Min 2.4 2.4 3.2 3.2 4.2 4.2 Max 14.2 18 22.3 26.6 35 43
Head Height
Min 3 4 5 6 8 10
Tolerance on Length
Description Applications/ Advantages Material Hardness Yield Strength Tensile Strength Elongation Plating
A round head, self-anchoring bolt with a shorter square neck than a standard carriage bolt, and a metric thread pitch. Used in the same way as a standard carriage bolt but in sheet metal where a full-sized square neck would cause an obstruction on the nut side of the fastening. Class 4.8 carriage bolts shall be made from a carbon steel which conforms to the following chemical composition-Carbon: 0.55% maximum; Phosphorus: 0.05% maximum; Sulfur: 0.06% maximum. Rockwell B 71 - 99.5 (Vickers HV 130 - 250) 340 N/mm2 minimum 420 N/mm2 minimum 14% minimum See Appendix-A for plating information