Dear customer,
For over 80 years the production of high tensile shackles has been our core business and competence.
Dirk van Beest founded the Van Beest company in 1922, initially as a supplier of iron works to the dredging industry, which was strongly
developed in the Sliedrecht area.
From the very beginning, the company has been forging shackles. Its ironwork expertise gave the Van Beest shackle an edge over
the competition and this was the start of a network of professional users that now stretches across the globe. The designs and quality standards of our shackles are the result of requirements put forward over the years by our customers in markets throughout the
world.
Our shackles are marked Green Pin, and we are the sole proprietors of the trade name Green Pin.
Production
At Van Beest we were faced with a labour-intensive production unit. Over the years Van Beest invested, with its own engineers, in
development of a series production line of high quality output. The highly automated machines in the factory are custom built to
Van Beests requirements and thus to those of our customers.
The same technicians demand the quality of the products during production and therefore guarantee quality to our customers.
Each individual Green Pin shackle is marked with the steel grade and a traceability code. But quality is not only a matter of the
product itself, it stretches across the entire organization. Since 1993 our company has been ISO certified by Lloyds; currently we are
ISO 9001-2000 certified.
Accessories
Our Green Pin shackles are used by professionals in many different environments such as the offshore industry, naval construction,
the fishing industry, mining, and general industry, to mention just a few.
The Green Pin shackle is usually the final connection, and to serve our customers best, we have added a wide range of steel wire rope
and chain accessories which complement our full range of high quality shackles. These accessories are engineered bij Van Beest and
carefully sourced from certified suppliers to ensure they represent the same high quality performance as our own products.
Distribution
Both our Green Pin shackles and accessories are inspected and stored at our main warehouse in Sliedrecht, 30 km from Rotterdam,
where we offer our wide range of shackles and accessories from stock. Rotterdam is the main seaport to Europe inbound and has
sailing connections to all the major business centres across the world outbound.
Storage efficiency is optimized by the latest computer software, enabling us to make maximum use of our storage facilities.
A customer order can be shipped from our warehouse within 4 hours from placing the order. Additionally, wholesalers
throughout the world maintain stocks of our Green Pin shackles and accessories in order to serve their
own target markets best. In over 80 countries worldwide Green Pin shackles and accessories are
available from storage at our various distributors. We will be pleased to advise you of the Green Pin
supplier nearest to you to obtain supplies.
We trust this catalogue will be a helpful business tool for you and that it will assist you in serving your
customers needs. In addition, our skilled salespeople and technicians are always at your service.
Please do not hesitate to contact us for any question related to shackles or other wire rope and chain
accessories in general.
We are convinced that with the full range of our Green Pin products and services you have found an
excellent source that enables you to meet your needs in the global marketplace.
Kind regards,
C. Boer
Managing Director
R.M. Meer
General Sales Manager
P.S.: For general business terms and conditions see page 158
VAN BEEST BV, manufacturer and supplier of wire rope and chain fittings. Reg. trade mark Green Pin
Rabobank: accountnumber 35 93 43 155. IBAN code: NL86RABO039343155, SWIFT/BIC code: RABONL2U
Postbank 189638, Vat number NL 0091.33.835.B01, Chamber of Commerce Dordrecht: number 23009317
All our offers and contracts are subject to our general conditions of business as registered with the District Court of Dordrecht
on May 13, 1994 under number 17.088. Copies of these conditions are printed in our catalogue or can be obtained on request.
Introduction
Introduction
VAN BEEST BV, manufacturer and supplier of wire rope and chain fittings. Registered trade mark Green Pin
VAN BEEST BV
Head Office
P.O. Box 57
3360 AB Sliedrecht
The Netherlands
P.O. Box 18 42
D-59450 Werl
Germany
Industrieweg 6
3361 HJ Sliedrecht
The Netherlands
Industriestrae 9
D-59457 Werl
Germany
Telephone
Telefax
E-mail
Internet
Telephone
Telefax
E-mail
Telephone
Telefax
E-mail
+31 184 41 33 00
+31 184 41 49 59
sales@vanbeest.nl
www.vanbeest.nl
+1 800 489 75 08
+1 713 674 82 24
vanbeestus@aol.com
Introduction
General
In case you do not use the products yourself but are reselling these as a part of a product manufactured by
yourself, please take our general cautions and warnings into account and make these known to your customers
as well. In any case, we do not accept any responsibility or liability, nor can we be held responsible for any
misuse or damage with, by or at your customers due to negligent use.
Definitions
Material
For the production of shackles and other lifting devices, different raw materials are used, depending on the use
of the finished product. For shackles for example, depending on the specific use, the following raw materials
can be applied:
Load
Following terms are used to define a load:
Working Load Limit or WLL: the maximum load the product is designed to support, in general use and in a
straight pull.
Proof Load or PL: this is the load applied on proof testing the product. At this load the product may not show
visual deformation. For further specific information as to the proof load applied, we refer to the separate paragraph on testing further on.
Minimum Breaking Load or MBL; the minimum load at which the product may fail or no longer support the
load. Where applicable the details on the MBL are given specifically for each product range, at the beginning
of each chapter.
Shock Load: a load resulting from a very rapid application of the load on the product. Shock loads are to be
avoided in practice since these increases the stress on the product significantly and may affect its product
life.
The unit that is used in this catalogue to indicate WLL, PL and MBL is metric tons.
Safety factor
This factor gives the ratio between the Minimum Breaking Load and the Working Load Limit.
For the standard range of Green Pin shackles for example, the safety factor is 6:1, meaning that the shackle may
only break once it is overloaded by a factor of at least 6 (6 times its designed Working Load Limit).
Product dimensions
All product dimensions in this catalogue are nominal dimensions. Product design, materials and/or specifications
can be subject to alterations without prior notification.
Finish
Products can have following finish:
Selfcoloured: the product is delivered in the condition it has been forged or machined and has undergone no
specific finish treatment.
Electro-galvanized: the product is electro-galvanized according to the customary standards, after the actual
production of the product. The thickness of the coating is at least 5 m.
Hot dipped galvanized: the product is hot dipped galvanized according to the customary standards, after the
actual production of the product. The thickness of the coating is at least 70 m.
Painted: the product is painted in a specific colour after the production.
Standard
These refer to the specific standards indicated for the product.
Temperature range
This indicates the temperature range at which the product can be used. Outside the temperature range the WLL
of a product may be affected.
Depending on the type of product and certificate availability for a certain product, following certificates are used
in this catalogue:
Carbon steel
Alloy steel
Stainless steel
Selfcoloured
Painted
Electro-galvanized
Hot dipped galvanized
Introduction
Certificates
Introduction
Testing
Generally the following proof loads are applied to the load rated products and certificates can be supplied upon
request. For further conditions on certificates please consult the general price list.
For Green Pin shackles, the actual proof load depends on the shackle type and dimension and is applied as
follows:
working load
limit
tons
0.33
0.5
0.75
1
1.5
2
3.25
3.3
4.75
5
6.5
7
8.5
9.5
12
12.5
13.5
15
17
18
21
25
30
35
40
42.5
50
55
75
80
85
110
120
125
140
150
175
200
250
300
400
500
600
700
800
900
1000
1200
1250
1500
Green Pin
standard shackles
polar shackles
heavy duty shackles
proofload
tons
0.66
1
1.5
2
3
4
6.5
Green Pin
super shackles
Green Pin
sling shackles
proofload
tons
proofload
tons
6.6
9.5
10
13
14
17
19
24
25
27
30
34
36
42
50
60
65
70
74
75
90
75
112.5
120
127.5
165
180
187.5
210
225
225
262.5
300
375
450
600
750
900
1050
1200
1350
1500
1800
1875
220
300
375
450
532
665
798
931
1064
1197
1330
1596
1663
2000
All Working Load Limits (WLL) indicated in this catalogue or in other Van Beest literature or publications are only
applicable to recently supplied, new and unused products used under normal conditions.
Should extreme circumstances or shock loading be applicable, this must be taken into account when specifying
the products to be used.
The Working Load Limit should be applied in a straight pull and overloads should not be applied. This also
applies to side loads, which also should be avoided, as the products are not designed for this purpose and the
application of a side load may significantly decrease the product life.
The Working Load Limit for the product corresponds to static use. In case of dynamic use (breaking, accelerations, shocks), the effective stress on the product increases significantly which can lead to product failure.
It is required that the products are regularly inspected and that the inspection should take place in accordance
with the safety standards given in the country of use. This is required because the products in use may be
affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material
structure.
Inspection should take place at least every six months and even more frequently when the products are used in
severe operating conditions.
In accordance with our on-going policy to improve our products, some dimensions or product markings
may differ from those stated. The characteristics mentioned in this catalogue or in other Van Beest literature or publications are given merely as an indication. Van Beest reserves the right to make all suitable
modifications to any product, even after acceptance of the customer order. In any case, the essential characteristics and performances of the products shall not be negatively affected by such modifications. Any dimension considered to be critical should be verified with our engineering department.
Conversion factors
To convert
from
Length
mm
inch
to
inch
mm
Mass
US tons
metric tons
metric tons
pounds
metric tons
kilogram
metric tons
kilo Newton
pounds
kilogram
metric tons
US tons
pounds
metric tons
kilogram
metric tons
kilo Newton
metric tons
kilogram
pounds
Torque
Newton meter
foot pound-force
foot pound-force
Newton meter
multiply by
0.0393701
25.4
0.9071847
1.1023113
2204.6226218
0.0004536
1000
0.001
9.8066500
0.1019716
0.4535924
2.2046226
0.7375621
1.3558180
Introduction
Introduction
Introduction
Shackles
10
Thimbles
46
56
Sleeves
62
Sockets
66
Turnbuckles
74
Links
86
Swivels
90
Hooks
96
100
10
Loadbinders
102
11
Chain
106
12
108
13
Blocks
114
14
General Hardware
124
15
132
16
Shackles
Applications
Shackles are used in lifting and static systems as removable links to connect (steel) wire rope, chain and other
fittings. Screw pin shackles are used mainly for non-permanent applications. Safety bolt shackles are used for
long-term or permanent applications or where the load may slide on the pin causing rotation of the pin.
Chain or dee shackles are mainly used on one-leg systems whereas anchor or bow shackles are mainly used
on multi-leg systems.
Range
Van Beest offers a wide range of bow and dee shackles, depending on the application on which the shackle
is going to be used; the range stretches from Working Load Limit (WLL) 0.33 tons to 1500 tons. Therefore, our
customers have a very extensive range to choose the shackle exactly suitable for the application. Most of the
shackles are directly available from stock. Furthermore, shackles can be supplied to many standards such as the
US Federal Specification RR-C-271, EN 13889, British Standard 3032, DIN 82101, DIN 82016 etc.
Polar shackles are for use in extreme climatic conditions with material properties guaranteed up to temperatures
of -40oC, and furthermore we offer a wide range of general commercial shackles, which are not suitable for lifting
but merely for fixing purposes.
Design
All Van Beest shackles have a specific design for a specific application. Examples are the Super shackles which
are made out of grade 8 steel enabling the dimensions of the shackles to be minimized for use in limited space
conditions, without loss of functionality or Working Load Limit.
Or sling shackles for use with large slings, to provide a better radius to the sling being used. Another example
of functional design is the use of shackles where the pin has a square sunken hole so as not to obstruct the use
of fishing nets. These are all examples of a highly functional design, to optimize the use of the Van Beest shackles
in daily use.
2
3
Furthermore, shackles used for lifting applications are stamped with the following marks, to specify the quality
and safety of use of the shackles:
5
6
i.e. WLL 25 T
i.e. Bs, indicating Van Beest
i.e. H pertaining to a particular batch
i.e. 4, 6, 8
i.e. CE, Conformit Europen indicating that the product is suitable
for lifting purposes.
Van Beest Green Pin shackles meet all relevant requirements of the Machinery Directive 98/37/EC and all latest
amendments.
7
8
Finish
Shackles supplied by Van Beest can be either hot dipped galvanized, electro-galvanized, painted or selfcoloured, depending on the type of shackle and its application.
Please consult the product section further on for each type of shackle what finish the product has.
10
11
12
13
14
15
16
10
Upon request at time of order, all load rated shackles can be supplied with any of the following documents or
certificates:
-
Shackles
Certification
The first four of the above mentioned certificates can be supplied at no extra charge. For all other certificates,
additional costs will be charged.
The test certificates can be supplied surveyed by all official classification societies, such as Lloyds, Det Norske
Veritas, British Standards Bureau, American Bureau of Shipping, Germanischer Lloyds or any other officially
certified inspection body.
Green Pin Standard Shackles and Green Pin Polar Shackles are DNV type approved to certification Note 2.7-1,
lifting sets for offshore containers.
1
2
3
4
5
6
Assembly
Ensure that the pin is correctly screwed into the shackle eye, i.e. tighten hand-tight, then secure using a wrench
or other suitable tool so that the collar of the pin is fully seated on the shackle eye. Ensure that the pin is of the
correct length so that it penetrates the full depth of the screwed eye and allows the collar of the pin to seat on
the surface of the shackle eye.
7
8
Incorrect seating of the pin may be due to a bent pin, too tight fitting thread or misalignment of the pin holes.
Do not use the shackle under these circumstances. Never replace a shackle pin except with one of the same
size, type and make as it may not be suitable for the loads imposed.
Select the correct type of shackle and its Working Load Limit for the particular application. Should extreme
circumstances or shock loading be applicable, this must be well taken into account on selecting the correct
shackle. Please note that commercial shackles are not to be used for lifting applications.
10
Make sure that the shackle is supporting the load correctly, i.e. along the axis of the shackle body centreline,
avoid introduction of bending loads, unstable loads and do not apply overloads.
11
12
13
14
15
16
11
Shackles
Side loads
Side loads should be avoided as well, as the products are not designed for this purpose. If side loads cannot be
avoided, the following reduction factors must be taken into account:
Load angle
0
45
90
In-line loading is considered to be a load perpendicular to the pin and in the plane of the bow. Load angles in
the table are the deviating angles from the in line loads.
When using shackles in connection with multi-leg slings, due consideration should be given to the effect of the
angle between the legs of the sling. As the angle increases, so does the load in the sling leg and consequently
in any shackle attached to that leg.
1
2
3
4
5
6
When a shackle is used to connect two slings to the hook of a lifting device, a bow type shackle must be assembled with the slings in the shackle body and the hook engaged with the shackle pin. The angle between the
slings should not exceed 120.
To avoid eccentric loading of the shackle a loose spacer may be used on either end of the shackle pin. Do not
reduce the width between the shackle jaws by welding washers or spacers to the inside faces of the eyes or by
closing the jaws, as this will affect the properties of the shackle.
8
9
10
11
12
13
RIGHT
WRONG
When a shackle is used to secure the top block of a set of wire rope blocks the load on this shackle is increased
by the value of the hoisting effect.
14
15
16
12
Shackles
Avoid applications where due to movement (e.g. of the load or the rope) the shackle pin can rotate and possibly
be unscrewed. If such an application is necessary or when the shackle is to be left in place for a prolonged period
or where maximum pin security is required, use a shackle with a safety bolt, nut and split cotter pin.
1
2
3
4
Shackles should not be immersed in acidic solutions or exposed to acid fumes or other chemicals that are
potentially harmful for the shackle. Please be aware that these types of chemicals are used in certain production
processes.
5
6
Temperature
If extreme temperature situations are applicable, the following load reduction must be taken into account:
Temperature
0 - 200C
200 - 300C
300 - 400C
> 400C
8
9
The rating of shackles to EN 13889 assumes the absence of exceptionally hazardous conditions. Exceptionally
hazardous conditions include offshore activities, the lifting of persons and the lifting of potentially dangerous
loads such as molten metals, corrosive materials or fissile materials. In such cases a competent person should
assess the degree of hazard and the safe working load should be reduced accordingly from the Working Load
Limit.
10
11
12
Inspection
It is required that the shackles are regularly inspected and that the inspection should take place in accordance
with the safety standards given in the country of use. This is required because the products in use may be
affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material
structure.
Inspection should take place at least every six months and even more frequently when the shackles are used in
severe operating conditions.
13
14
15
16
13
Shackles
: bow and pin high tensile steel, Grade 6, quenched and tempered
: MBL equals 6 x WLL
: EN 13889 and
meets performance requirements of US Fed. Spec. RR-C-271 Type IVA Class 2, Grade A
Finish
: hot dipped galvanized
Temperature Range : -20C up to +200C
Certificates
: at no extra charges this product can be supplied with a works certificate, certificate of
basic raw material, manufacturer test certificate and/or EC Declaration of Conformity
G-4161
working diameter diameter diameter
load
bow
pin
eye
limit
a
b
c
tons
mm
mm
mm
0.33
0.5
0.75
1
1.5
2
3.25
4.75
6.5
8.5
9.5
12
13.5
17
25
35
42.5
55
1
2
3
4
5
7
9
10
11
13.5
16
19
22
25
28
32
35
38
45
50
57
65
6
8
10
11
13
16
19
22
25
28
32
35
38
42
50
57
65
70
In inch
8
9
10
11
12
13
14
15
16
14
/16
1
/4
5
/16
3
/8
7
/16
1
/2
5
/8
3
/4
7
/8
1
1
1
1
1
1
2
2
2
/8
/4
3
/8
1
/2
3
/4
1
/4
1
/2
/4
5
/16
3
/8
7
/16
1
/2
5
/8
3
/4
7
/8
1
1
1
1
1
1
2
2
2
2
/8
1
/4
3
/8
1
/2
5
/8
1
/4
/16
3
/4
9
width
inside
length
inside
width
bow
length
length
bolt
width
bow
d
mm
e
mm
f
mm
g
mm
h
mm
i
mm
j
mm
kg
5
7
9
10
11
13.5
16
19
22
25
28
32
35
38
45
50
57
65
9.5
12
13.5
17
19
22
27
31
36
43
47
51
57
60
74
83
95
105
22
29
32
36.5
43
51
64
76
83
95
108
115
133
146
178
197
222
260
16
20
22
26
29
32
43
51
58
68
75
83
92
99
126
138
160
185
41
54
61
71
80
91
114
136
157
176
197
218
240
262
314
358
414
463
31
40
49
56
68
76
93
107
123
141
158
176
192
208
250
281
321
355
28
37
42
49
54
63
79
94
107
124
137
154
170
183
226
250
287
329
0.02
0.05
0.1
0.14
0.19
0.36
0.63
1.01
1.5
2.21
3.16
4.31
5.55
7.43
12.84
18.15
26.29
37.6
12.5
17
21
23
26
34
40
47
53
60
67
74
80
89
104
119
134
145
width
eye
width
eye
width
inside
length
inside
width
bow
length
length
bolt
width
bow
weight
each
d
inch
e
inch
f
inch
g
inch
h
inch
i
inch
j
inch
lbs
1
1
1
1
2
2
2
2
3
3
4
4
5
5
/2
11
/16
13
/16
29
/32
1
/32
11
/32
19
/32
7
/8
3
/32
11
/32
5
/8
29
/32
5
/32
1
/2
1
/8
11
/16
9
/32
3
/4
weight
each
/16
9
/32
11
/32
3
/8
7
/16
17
/32
5
/8
3
/4
7
/8
1
1
1
1
1
1
1
2
2
/8
/32
3
/8
17
/32
25
/32
31
/32
1
/4
9
/16
9
1
1
1
1
1
2
2
2
2
3
3
4
/8
1
/2
17
/32
11
/16
3
/4
7
/8
3
/32
1
/4
7
/16
23
/32
7
/8
1
/4
/32
29
/32
9
/32
3
/4
1
/8
11
1
1
1
1
2
2
3
3
3
4
4
5
5
7
7
8
10
/8
5
/32
9
/32
7
/16
23
/32
17
/32
/32
/4
1
/4
17
/32
1
/4
3
/4
3
/4
/4
1
/4
3
/8
25
/32
7
/8
1
1
1
1
2
2
2
2
3
3
3
4
5
6
7
/32
/32
23
/32
9
/32
/16
15
/16
9
/32
5
/8
29
/32
15
/16
7
/16
9
/32
9
/32
11
1
2
2
2
3
3
4
5
6
6
7
8
9
10
12
14
16
18
/8
1
/8
3
/8
25
/32
5
/32
19
/32
1
/2
11
/32
5
/32
29
/32
3
/4
9
/16
7
/16
5
/16
11
/32
3
/32
5
/16
1
/4
1
1
1
2
2
3
3
4
4
5
6
6
7
8
9
11
12
14
/4
9
/16
15
/16
3
/16
11
/16
11
/16
/16
13
/16
9
/16
3
/16
29
/32
9
/16
3
/16
13
/16
3
/32
5
/8
3
1
1
1
1
2
2
3
3
4
4
5
6
6
7
8
9
11
12
/8
1
/2
11
/16
15
/16
1
/8
1
/2
1
/8
23
/32
3
/16
7
/8
3
/8
1
/32
11
/16
3
/16
29
/32
13
/16
5
/16
15
/16
0.05
0.11
0.22
0.3
0.42
0.79
1.38
2.22
3.31
4.86
6.97
9.49
12.24
16.37
28.31
40.01
57.96
82.89
: bow and pin high tensile steel, Grade 6, quenched and tempered
: MBL equals 6 x WLL
: EN 13889 and
meets performance requirements of US Fed. Spec. RR-C-271 Type IVA Class 3, Grade A
Finish
: hot dipped galvanized
Temperature Range : -20C up to +200C
Certificates
: at no extra charges this product can be supplied with a works certificate, certificate of
basic raw material, manufacturer test certificate and/or EC Declaration of Conformity
Shackles
G-4163
working diameter diameter diameter width
width
load
bow
pin
eye
eye
inside
limit
a
b
c
d
e
tons
mm
mm
mm
mm
mm
0.5
7
8
17
7
12
0.75
9
10
21
9
13.5
1
10
11
23
10
17
1.5
11
13
26
11
19
2
13.5
16
34
13.5 22
3.25
16
19
40
16
27
4.75
19
22
47
19
31
6.5
22
25
53
22
36
8.5
25
28
60
25
43
9.5
28
32
67
28
47
12
32
35
74
32
51
13.5
35
38
80
35
57
17
38
42
89
38
60
25
45
50
104
45
74
35
50
57
119
50
83
42.5
57
65
134
57
95
55
65
70
145
65
105
85
75
83
163
75
127
length
inside
f
mm
29
32
36.5
43
51
64
76
83
95
108
115
133
146
178
197
222
260
329
width
bow
length
length
bolt
g
mm
20
22
26
29
32
43
51
58
68
75
83
92
99
126
138
160
180
190
h
mm
54
61
71
80
91
114
136
157
176
197
218
240
262
314
358
414
463
556
i
mm
43
51
61
68
83
99
115
131
151
167
179
198
203
244
270
302
330
376
k
mm
4
5
8
11
13
17
20
23
25
28
31
34
19
24
27
30
33
40
kg
0.06
0.11
0.16
0.22
0.42
0.74
1.18
1.77
2.58
3.66
4.91
6.54
8.19
14.22
19.85
28.33
39.59
62
2
3
4
5
In inch
width
inside
e
inch
1
/2
17
/32
11
/16
3
/4
7
/8
1 3/32
1 1/4
1 7/16
1 23/32
1 7/8
2
2 1/4
2 11/32
2 29/32
3 9/32
3 3/4
4 1/8
5
length
inside
width
bow
length
length
bolt
f
inch
1 5/32
1 9/32
1 7/16
1 23/32
2
2 17/32
3
3 9/32
3 3/4
4 1/4
4 17/32
5 1/4
5 3/4
7
7 3/4
8 3/4
10 1/4
12 15/16
g
inch
25
/32
7
/8
1
1 5/32
1 9/32
1 23/32
2
2 9/32
2 11/16
2 15/16
3 9/32
3 5/8
3 29/32
4 15/16
5 7/16
6 9/32
7 9/32
7 1/2
h
inch
2 1/8
2 3/8
2 25/32
3 5/32
3 19/32
4 1/2
5 11/32
6 5/32
6 29/32
7 3/4
8 9/16
9 7/16
10 5/16
12 11/32
14 3/32
16 5/16
18 1/4
21 29/32
i
inch
1 23/32
2
2 3/8
2 11/16
3 9/32
3 29/32
4 17/32
5 5/32
5 15/16
6 19/32
7 1/32
7 25/32
8
9 19/32
10 5/8
11 7/8
13
14 25/32
j
inch
1 1/2
1 11/16
1 15/16
2 1/8
2 1/2
3 1/8
3 23/32
4 3/16
4 7/8
5 3/8
6 3/32
6 23/32
7 3/16
8 29/32
9 13/16
11 5/16
12 15/16
14
k
inch
lbs
5
/32
0.13
3
/16
0.25
5
/16
0.34
7
/16
0.48
17
/32
0.92
11
/16
1.62
25
/32
2.59
29
/32
3.9
1
5.69
1 1/8
8.06
1 1/4
10.81
1 11/32 14.42
3
/4
18.06
1 5/16
31.34
1 3/32
43.77
1 3/16
62.46
1 5/16
87.27
1 19/32 136.69
6
7
8
9
10
11
12
13
14
15
16
15
Shackles
: bow and pin high tensile steel, Grade 6, quenched and tempered
: MBL equals 6 x WLL
: EN 13889 and
meets performance requirements of US Fed. Spec. RR-C-271 Type IVB Class 2, Grade A
Finish
: hot dipped galvanized
Temperature Range : -20 C up to +200 C
Certificates
: at no extra charges this product can be supplied with a works certificate, certificate of
basic raw material, manufacturer test certificate and/or EC Declaration of Conformity
G-4151
working
load
limit
tons
0.33
0.5
0.75
1
1.5
2
3.25
4.75
6.5
8.5
9.5
12
13.5
17
25
35
42.5
55
1
2
3
4
5
b
mm
6
8
10
11
13
16
19
22
25
28
32
35
38
42
50
57
65
70
c
mm
12.5
17
21
23
26
34
40
47
53
60
67
74
80
89
104
119
134
145
width
eye
d
mm
5
7
9
10
11
13.5
16
19
22
25
28
32
35
38
45
50
57
65
width
inside
e
mm
9.5
12
13.5
17
19
22
27
31
36
43
47
51
57
60
74
83
95
105
length
inside
length
length
bolt
weight
each
f
mm
20
22
27
31
37
43
51
59
73
85
90
94
115
127
149
171
190
203
g
mm
38
47
56
66
74
85
105
125
144
161
179
199
220
239
283
333
360
399
h
mm
31
40
49
56
68
76
93
107
123
141
158
176
192
208
250
281
321
355
kg
0.02
0.05
0.09
0.14
0.19
0.32
0.54
0.87
1.34
2.08
2.77
3.72
5.14
6.85
11.45
16.86
24.61
32.65
In inch
working
load
limit
tons
0.33
0.5
0.75
1
1.5
2
3.25
4.75
6.5
8.5
9.5
12
13.5
17
25
35
42.5
55
8
9
10
11
12
13
14
15
16
16
b
inch
1
/4
5
/16
3
/8
7
/16
1
/2
5
/8
3
/4
7
/8
1
1 1/8
1 1/4
1 3/8
1 1/2
1 5/8
2
2 1/4
2 9/16
2 3/4
c
inch
1
/2
11
/16
13
/16
29
/32
1 1/32
1 11/32
1 19/32
1 7/8
2 3/32
2 11/32
2 5/8
2 29/32
3 5/32
3 1/2
4 1/8
4 11/16
5 9/32
5 3/4
width
eye
width
inside
length
inside
length
lenght
bolt
weight
each
d
inch
3
/16
9
/32
11
/32
3
/8
7
/16
17
/32
5
/8
3
/4
7
/8
1
1 1/8
1 9/32
1 3/8
1 17/32
1 25/32
1 31/32
2 1/4
2 9/16
e
inch
3
/8
1
/2
17
/32
11
/16
3
/4
7
/8
1 3/32
1 1/4
1 7/16
1 23/32
1 7/8
2
2 1/4
2 11/32
2 29/32
3 9/32
3 3/4
4 1/8
f
inch
25
/32
7
/8
1 3/32
1 1/4
1 1/2
1 23/32
2
2 5/16
2 7/8
3 11/32
3 9/16
3 23/32
4 17/32
5
5 7/8
6 3/4
7 1/2
8
g
inch
1 17/32
1 7/8
2 3/16
2 19/32
2 29/32
3 11/32
4 1/8
4 29/32
5 11/16
6 5/16
7 1/32
7 13/16
8 11/16
9 3/8
11 5/32
13 1/8
14 5/32
15 23/32
h
inch
1 1/4
1 9/16
1 15/16
2 3/16
2 11/16
3
3 11/16
4 3/16
4 13/16
5 9/16
6 3/16
6 29/32
7 9/16
8 3/16
9 13/16
11 3/32
12 5/8
14
lbs
0.04
0.11
0.2
0.3
0.42
0.7
1.19
1.92
2.95
4.59
6.1
8.2
11.33
15.1
25.23
37.17
54.26
71.98
: bow and pin high tensile steel, Grade 6, quenched and tempered
: MBL equals 6 x WLL
: EN 13889 and
meets performance requirements of US Fed. Spec. RR-C-271 Type IVB Class 3, Grade A
Finish
: hot dipped galvanized
Temperature Range : -20 C up to +200 C
Certificates
: at no extra charges this product can be supplied with a works certificate, certificate of
basic raw material, manufacturer test certificate and/or EC Declaration of Conformity
Shackles
G-4153
working diameter diameter diameter
load
bow
pin
eye
limit
a
b
c
tons
mm
mm
mm
2
13.5
16
34
3.25
16
19
40
4.75
19
22
47
6.5
22
25
53
8.5
25
28
60
9.5
28
32
67
12
32
35
74
13.5
35
38
80
17
38
42
89
25
45
50
104
35
50
57
119
42.5
57
65
134
55
65
70
145
85
75
83
163
width
eye
d
mm
13.5
16
19
22
25
28
32
35
38
45
50
57
65
75
width
inside
length
inside
length
e
mm
22
27
31
36
43
47
51
57
60
74
83
95
105
127
f
mm
43
51
59
73
85
90
94
115
127
149
171
190
203
229
g
mm
85
105
125
144
161
179
199
220
239
283
333
360
399
455
i
mm
13
17
20
23
25
28
31
34
19
24
27
30
33
40
kg
0.39
0.67
1.08
1.66
2.46
3.4
4.51
6.1
7.63
13.25
18.53
25.94
35.33
52.97
1
2
3
4
5
In inch
/2
5
/8
3
/4
7
/8
1
1
1
1
1
1
2
2
2
3
/8
1
/4
3
/8
1
/2
3
/4
1
1
/4
/2
/8
3
/4
7
/8
1
1
1
1
1
1
2
2
2
2
3
/8
/4
3
/8
1
/2
5
/8
1
/4
9
/16
3
/4
1
/4
1
1
1
2
2
2
2
3
3
4
4
5
5
6
width
eye
width
inside
length
inside
length
d
inch
e
inch
f
inch
g
inch
11
/32
19
/32
7
/8
3
/32
11
/32
5
/8
29
/32
5
/32
1
/2
1
/8
11
/16
9
/32
3
/4
7
/16
17
/32
5
/8
3
/4
7
/8
1
1
1
1
1
1
1
2
2
2
/8
9
/32
3
/8
17
/32
25
/32
31
/32
1
/4
9
/16
15
/16
1
1
1
1
1
2
2
2
2
3
3
4
5
/8
3
/32
1
/4
7
/16
23
/32
7
/8
1
/4
11
/32
29
/32
9
/32
3
/4
1
/8
1
2
2
2
3
3
3
4
5
5
6
7
8
9
23
/32
/16
/8
11
/32
9
/16
23
/32
17
/32
7
/8
/4
1
/2
3
3
4
4
5
6
7
7
8
9
11
13
14
15
17
11
/32
1
/8
29
/32
11
/16
5
/16
1
/32
13
/16
11
/16
3
/8
5
/32
1
/8
5
/32
23
/32
29
/32
i
inch
/32
29
/32
17
/32
5
/32
15
/16
9
/16
1
/32
25
/32
19
/32
/8
29
/32
5
25
/32
17
/32
11
/16
25
/32
29
/32
1
1
1
1
1
1
1
1
1
/8
/4
11
/32
3
/4
15
/16
3
/32
3
/16
5
/16
19
/32
1
lbs
0.85
1.48
2.39
3.66
5.42
7.5
9.95
13.45
16.82
29.21
40.86
57.19
77.89
116.77
6
7
8
9
10
11
12
13
14
15
16
17
Shackles
Material
Safety Factor
Finish
Certificates
Note
:
:
:
:
P-6036
working diameter diameter diameter width
load
bow
pin
eye
eye
limit
a
b
c
d
tons
mm
mm
mm
mm
120
95
95
215
89
150
105
108
245
100
200
120
130
288
110
250
130
140
308
115
300
140
150
335
120
400
170
175
387
160
500
180
185
410
160
600
200
205
458
185
700
210
215
468
200
800
210
220
478
200
900
220
230
500
210
1000
240
240
530
210
1250
260
270
600
225
1500
280
290
640
225
1
2
3
width
inside
length
inside
width
bow
length
length
bolt
e
mm
144
165
175
200
200
225
250
275
300
300
320
340
360
360
f
mm
381
400
500
540
600
650
700
700
700
700
700
700
700
700
g
mm
238
275
290
305
305
325
350
375
400
400
420
420
450
450
h
mm
667
702
854
921
1018
1137
1213
1267
1287
1294
1320
1360
1430
1480
i
mm
440
490
520
560
575
690
710
810
850
870
920
940
1020
1060
j
mm
416
485
530
565
585
665
710
775
820
820
860
900
970
1010
width
inside
length
inside
width
bow
length
length
bolt
e
inch
5 11/16
6 17/32
6 29/32
7 7/8
7 7/8
8 7/8
9 13/16
10 13/16
11 13/16
11 13/16
12 19/32
13 3/8
14 5/32
14 5/32
f
inch
15
15 3/4
19 11/16
21 9/32
23 5/8
25 19/32
27 1/2
27 1/2
27 1/2
27 1/2
27 1/2
27 1/2
27 1/2
27 1/2
g
inch
9 11/32
10 13/16
11 7/16
12
12
12 25/32
13 25/32
14 3/4
15 3/4
15 3/4
16 9/16
16 9/16
17 23/32
17 23/32
h
inch
26 9/32
27 5/8
33 5/8
36 9/32
40
44 3/4
47 3/4
49 7/8
50 11/16
51
52
53 9/16
56 5/16
58 5/16
i
inch
17 5/16
19 9/32
20 1/2
22
22 5/8
27 5/32
28
31 7/8
33 1/2
34 1/4
36 1/4
37
40 1/4
41 3/4
j
inch
16 3/8
19 1/8
20 7/8
22 1/4
23
26 1/4
28
30 1/2
32 3/8
32 3/8
33 7/8
35 1/2
38 1/4
39 3/4
k
mm
50
60
60
65
70
70
70
70
70
70
70
70
70
70
kg
110
160
235
285
340
560
685
880
980
1100
1280
1460
1990
2400
4
5
In inch
7
8
9
10
11
12
13
14
15
16
18
k
inch
2
2 3 /8
2 3/8
2 9/16
2 3/4
2 3/4
2 3/4
2 3/4
2 3/ 4
2 3/ 4
2 3/ 4
2 3/4
2 3/4
2 3/ 4
lbs
243
353
518
628
750
1235
1510
1940
2161
2425
2822
3219
4387
5291
Material
Safety Factor
Finish
Certificates
Note
:
:
:
:
Shackles
G-6038
working diameter diameter diameter
load
bow
pin
eye
limit
a
b
c
tons
mm
mm
mm
120
95
95
215
width
eye
width
inside
length
inside
length
d
mm
89
e
mm
144
f
mm
267
g
mm
530
i
mm
50
kg
110
1
2
3
4
5
In inch
3 3/4
3 3/4
15
/32
width
eye
width
inside
length
inside
length
d
inch
e
inch
f
inch
g
inch
h
inch
i
inch
20 7/8
17 5/16
17
/32
11
/16
10
17
/32
31
/32
6
7
lbs
243
8
9
10
11
12
13
14
15
16
19
Shackles
P-6033
Material
Safety Factor
Finish
Temperature Range
Certificates
Note
:
:
:
:
:
body
pin
eye
width
width
length
width
eye
inside
inside
bow
length
width
width
thickness bearing
nut
surface
weight
each
limit
1
2
3
4
5
tons
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
55
60
57
115
55
95
250
160
396
304
270
45
100
75
70
70
140
70
105
290
186
467
359
345
54
120
67
125
85
80
155
85
130
365
220
569
428
410
64
150
110
kg
50
150
94
95
180
89
140
390
250
627
441
455
50
170
160
200
110
105
200
100
150
480
276
744
474
508
50
205
220
250
126
120
228
110
170
540
300
842
528
600
60
240
320
300
135
134
245
122
185
600
350
926
594
620
70
265
350
400
160
160
295
145
220
575
370
964
686
715
80
320
635
500
170
180
330
160
250
680
450
1107
763
810
90
340
803
600
190
200
350
170
275
740
490
1207
828
913
100
370
980
700
200
215
392
190
300
750
540
1257
878
993
100
400
1260
800
218
230
420
200
325
850
554
1395
959
986
110
420
1430
900
242
255
466
220
350
850
584
1454
1040
1050
120
440
1650
1000
260
270
490
240
380
855
614
1497
1116
1176
120
460
2120
1250
285
300
510
260
430
930
650
1620
1193
1275
150
530
2400
1500
295
320
550
280
460
950
680
1710
1278
1350
160
560
2980
width
width
length
width
length
width
width
eye
inside
inside
bow
In inch
load
body
pin
eye
thickness bearing
nut
surface
weight
each
limit
7
8
9
10
11
12
13
14
15
16
20
tons
inch
inch
inch
inch
inch
inch
inch
inch
inch
inch
inch
inch
lbs
55
2 3/8
17
15
12
110
75
2 3/4
17
11
18
14
125
3 3/8
11
14
11
22
16
150
3 3/4
17
17
15
24
11
15
29
18
10
29
23
21
11
33
/4
/4
/32
/4
/32
/32
/8
/8
/32
/4
/32
/32
/4
/8
/8
/32
/8
/8
/8
/8
/16
/16
/16
/8
10
1 3/4
13
2 1/8
16
2 1/2
17
18
18
11
20
20
23
2 3/8
23
24
28
31
/8
/8
/8
/16
/8
/8
/8
/8
/8
/8
/4
148
243
353
705
2 3/4
10
772
3 1/8
12
1400
1770
/4
200
4 /16
250
300
5 5/16
25
23
13
36
400
6 5/16
11
23
11
22
14
38
500
6 3/4
13
26
17
43
30
3 9/16
13
600
7 1/2
13
25
23
10
29
19
47
32
36
14
2161
700
7 7/8
15
11
13
29
21
49
34
39
15
2778
800
8 5/8
16
12
33
21
55
37
38
16
3153
18
11
11
13
33
23
41
41
4 /4
17
3638
19
15
44
46
4 3/4
18
4674
10
50
20
53
6 3/8
22
/8
/4
/16
/16
/8
/8
/2
/8
900
9 /16
10
1000
10 1/4
10
20
21
/8
1250
11 /4
11
1500
11 5/8
12
/8
/8
/8
/8
/8
/32
/16
/16
/32
/32
11
/16
11
/16
/16
/32
/32
/16
/32
/2
/8
/16
/16
/4
/32
/32
/32
/16
/8
/8
/16
/4
/4
/8
/4
/8
/8
/4
/8
/2
/2
/2
/8
/8
/4
/16
/4
/4
/4
/8
57
33
24
16
15
36
25
18
37
26
/16
/8
/8
/8
/8
/8
/8
/4
/16
/8
/2
/16
/4
/8
27
/8
/2
/2
/4
59
63
47
67
50
/4
/8
/8
/8
/4
/8
/8
/8
/4
/8
/8
/8
/16
/4
/8
4 3/8
3
485
/2
/2
/8
/8
/8
/4
/16
/8
/8
/8
5291
6570
Material
Safety Factor
Standard
Finish
Certificates
Shackles
G-5263
working diameter diameter diameter width
load
bow
pin
eye
eye
limit
a
b
c
d
tons
mm
mm
mm
mm
3.3
13.5
16
34
13.5
5
16
19
40
16
7
19
22
47
19
9.5
22
25
53
22
12.5
25
28
60
25
15
28
32
67
28
18
32
35
74
32
21
35
38
80
35
30
38
42
89
38
40
45
50
104
45
50
50
57
119
50
80
65
70
145
65
110
75
83
163
75
140*
95
95
215
89
175*
105
108
245
100
width
inside
length
inside
width
bow
length
length
bolt
e
mm
22
27
31
36
43
47
51
57
60
73
83
105
127
144
165
f
mm
51
64
76
83
95
108
115
133
146
178
197
260
330
381
400
g
mm
32
43
51
58
68
75
83
92
99
126
138
180
190
238
275
h
mm
91
114
136
157
176
197
218
240
262
314
358
463
556
667
702
i
mm
83
99
115
131
151
167
179
198
203
244
270
330
376
440
490
k
mm
13
17
20
23
25
28
31
34
19
24
27
33
40
50
60
kg
0.44
0.79
1.26
1.88
2.78
3.87
5.26
6.94
8.79
15
20.7
41.1
62.2
110
160
1
2
3
4
5
In inch
width
inside
length
inside
width
bow
length
length
bolt
e
inch
7
/8
1 3/32
1 1/4
1 7/16
1 23/32
1 7/8
2
2 1/4
2 11/32
2 29/32
3 9/32
4 1/8
5
5 11/16
6 17/32
f
inch
2
2 17/32
3
3 9/32
3 3/4
4 1/4
4 17/32
5 1/4
5 3/4
7
7 3/4
10 1/4
12 15/16
15
15 3/4
g
inch
1 9/32
1 23/32
2
2 9/32
2 11/16
2 15/16
3 9/32
3 5/8
3 29/32
4 15/16
5 7/16
7 9/32
7 1/2
9 11/32
10 13/16
h
inch
3 19/32
4 1/2
5 11/32
6 5/32
6 29/32
7 3/4
8 9/16
9 7/16
10 5/16
12 11/32
14 3/32
18 1/4
21 29/32
26 9/32
27 5/8
i
inch
3 9/32
3 29/32
4 17/32
5 5/32
5 15/16
6 19/32
7 1/32
7 25/32
8
9 19/32
10 5/8
13
14 25/32
17 5/16
19 9/32
j
inch
2 1/2
3 1/8
3 23/32
4 3/16
4 7/8
5 3/8
6 3/32
6 23/32
7 3/16
8 29/32
9 13/16
12 15/16
14
16 3/8
19 1/8
k
inch
lbs
17
/32
0.97
11
/16
1.74
25
/32
2.78
29
/32
4.14
1
6.13
1 1/8
8.53
1 1/4
11.6
1 11/32 15.3
3
/4
19.38
15
/16 33.07
1 3/32 45.64
1 5/16 90.61
1 19/32 137.13
2
242.51
2 3/8 352.74
6
7
8
9
10
11
12
13
14
15
16
21
Shackles
1
2
3
width
inside
length
inside
width
bow
length
length
bolt
e
mm
22
27
31
36
43
47
51
57
60
74
83
95
105
127
f
mm
51
64
76
83
95
108
115
133
146
178
197
222
260
329
g
mm
32
43
51
58
68
75
83
92
99
126
138
160
180
190
h
mm
91
114
136
157
176
197
218
240
262
314
358
414
463
556
i
mm
83
99
115
131
151
167
179
198
203
244
270
302
330
376
width
inside
length
inside
width
bow
length
length
bolt
e
inch
7
/8
1 3/32
1 1/4
1 7/16
1 23/32
1 7/8
2
2 1/4
2 11/32
2 29/32
3 9/32
3 3/4
4 1/8
5
f
inch
2
2 17/32
3
3 9/32
3 3/4
4 1/4
4 17/32
5 1/4
5 3/4
7
7 3/4
8 3/4
10 1/4
12 15/16
g
inch
1 9/32
1 23/32
2
2 9/32
2 11/16
2 15/16
3 9/32
3 5/8
3 29/32
4 15/16
5 7/16
6 9/32
7 9/32
7 1/2
h
inch
3 19/32
4 1/2
5 11/32
6 5/32
6 29/32
7 3/4
8 9/16
9 7/16
10 5/16
12 11/32
14 3/32
16 5/16
18 1/4
21 29/32
i
inch
3 9/32
3 29/32
4 17/32
5 5/32
5 15/16
6 19/32
7 1/32
7 25/32
8
9 19/32
10 5/8
11 7/8
13
14 25/32
j
inch
2 1/2
3 1/8
3 23/32
4 3/16
4 7/8
5 3/8
6 3/32
6 23/32
7 3/16
8 29/32
9 13/16
11 5/16
12 15/16
14
j
mm
63
79
94
107
124
137
154
170
183
226
250
287
329
355
k
mm
13
17
20
23
25
28
31
34
19
24
27
30
33
40
kg
0.42
0.74
1.18
1.77
2.58
3.66
4.91
6.54
8.19
14.22
19.85
28.33
39.59
62
4
5
In inch
6
7
8
9
10
11
12
13
14
15
16
22
k
inch
17
/32
11
/16
25
/32
29
/32
1
1 1 /8
1 1 /4
1 11/32
3
/4
15
/16
1 3/32
1 3/16
1 5/16
1 19/32
lbs
0.92
1.62
2.59
3.9
5.69
8.06
10.81
14.42
18.06
31.34
43.77
62.46
87.27
136.69
dee shackles with safety bolt, for use under extreme climatic conditions
Material
Safety Factor
Standard
Shackles
G-5153
working diameter diameter diameter
load
bow
pin
eye
limit
a
b
c
tons
mm
mm
mm
2
13.5
16
34
3.25
16
19
40
4.75
19
22
47
6.5
22
25
53
8.5
25
28
60
9.5
28
32
67
12
32
35
74
13.5
35
38
80
17
38
42
89
25
45
50
104
35
50
57
119
42.5
57
65
134
55
65
70
145
85
75
83
163
width
eye
width
inside
length
inside
length
d
mm
13.5
16
19
22
25
28
32
35
38
45
50
57
65
75
e
mm
22
27
31
36
43
47
51
57
60
74
83
95
105
127
f
mm
43
51
59
73
85
90
94
115
127
149
171
190
203
229
g
mm
85
105
125
144
161
179
199
220
239
283
333
360
399
455
i
mm
13
17
20
23
25
28
31
34
19
24
27
30
33
40
kg
0.39
0.67
1.08
1.66
2.46
3.4
4.51
6.1
7.63
13.25
18.53
25.94
35.33
52.97
1
2
3
4
5
In inch
width
eye
width
inside
length
inside
length
d
inch
17
/32
5
/8
3
/4
7
/8
1
1 1/8
1 9/32
1 3/8
1 17/32
1 25/32
1 31/32
2 1/4
2 9/16
2 15/16
e
inch
7
/8
1 3/32
1 1/4
1 7/16
1 23/32
1 7/8
2
2 1/4
2 11/32
2 29/32
3 9/32
3 3/4
4 1/8
5
f
inch
1 23/32
2
2 5/16
2 7/8
3 11/32
3 9/16
3 23/32
4 17/32
5
5 7/8
6 3/4
7 1/2
8
9
g
inch
3 11/32
4 1/8
4 29/32
5 11/16
6 5/16
7 1/32
7 13/16
8 11/16
9 3/8
11 5/32
13 1/8
14 5/32
15 23/32
17 29/32
h
inch
3 9/32
3 29/32
4 17/32
5 5/32
5 15/16
6 9/16
7 1/32
7 25/32
8
9 19/32
10 5/8
11 29/32
13
14 25/32
i
inch
17
/32
11
/16
25
/32
29
/32
1
1 1/8
1 1/4
1 11/32
3
/4
15
/16
1 3/32
1 3/16
1 5/16
1 19/32
lbs
0.85
1.48
2.36
3.66
5.42
7.5
9.95
13.45
16.82
29.21
40.86
57.19
77.89
116.77
6
7
8
9
10
11
12
13
14
15
16
23
Shackles
Material
Safety Factor
Finish
Certificates
Note
:
:
:
:
G-4263
working diameter diameter diameter width
load
bow
pin
eye
eye
limit
a
b
c
d
tons
mm
mm
mm
mm
22
38
42
89
38
30
45
50
104
45
40
50
57
119
50
55
65
70
145
65
100
75
83
163
75
width
inside
length
inside
width
bow
length
length
bolt
e
mm
106
127
146
165
184
f
mm
216
248
273
314
330
g
mm
159
175
207
213
254
h
mm
319
370
411
487
530
i
mm
248
296
338
389
432
width
inside
length
inside
width
bow
length
length
bolt
e
inch
4 3/16
5
5 3/4
6 1/2
7 1/4
f
inch
8 1/2
9 3/4
10 3/4
12 3/8
13
g
inch
6 9/32
6 7/8
8 5/32
8 3/8
10
h
inch
12 9/16
14 9/16
16 3/16
19 3/16
20 7/8
i
inch
9 3/4
11 11/16
13 5/16
15 5/16
17
j
inch
9 1/4
10 7/16
12 1/8
13 1/2
15 7/8
j
mm
235
265
307
343
404
k
mm
19
24
27
33
40
kg
12.5
18
25
48
70
1
2
3
4
5
In inch
6
7
8
9
10
11
12
13
14
15
16
24
k
inch
lbs
3
/4
27.56
15
/16 39.68
1 3/32 55.12
1 5/16 105.82
1 19/32 154.32
Shackles
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
25
Shackles
Material
Safety Factor
Standard
Finish
Certificates
:
:
:
:
:
bow and pin high tensile steel, Grade 6, quenched and tempered
MBL equals 6 x WLL
meets performance requirements of US Fed. Spec. RR-C-271, Grade A
hot dipped galvanized
at no extra charges this product can be supplied with a works certificate, certificate of
basic raw material, manufacturer test certificate and/or EC Declaration of Conformity
G-4164
working diameter diameter diameter width
load
bow
pin
eye
eye
limit
a
b
c
d
tons
mm
mm
mm
mm
2
13.5
16
34
13.5
3.25
16
19
40
16
4.75
19
22
47
19
6.5
22
25
53
22
8.5
25
28
60
25
9.5
28
32
67
28
12
32
35
74
32
13.5
35
38
80
35
17
38
42
89
38
25
45
50
104
45
width
inside
length
inside
width
bow
length
length
bolt
width
width
e
mm
22
27
31
36
43
47
51
57
60
74
f
mm
51
64
76
83
95
108
115
133
146
178
g
mm
32
43
51
58
68
75
83
92
99
126
h
mm
91
114
136
157
176
197
218
240
262
314
i
mm
58
71
82
93
108
120
137
149
164
192
j
mm
63
79
94
107
124
137
154
170
183
226
k
mm
22
27
32
32
36
41
50
50
60
60
width
inside
length
inside
width
bow
length
length
bolt
width
width
e
inch
7
/8
1 3/32
1 1/4
1 7/16
1 23/32
1 7/8
2
2 1/4
2 11/32
2 29/32
f
inch
2
2 17/32
3
3 9/32
3 3/4
4 1/4
4 17/32
5 1/4
5 3/4
7
g
inch
1 9/32
1 23/32
2
2 9/32
2 11/16
2 15/16
3 9/32
3 5/8
3 7/8
5
h
inch
3 19/32
4 1/2
5 3/8
6 3/16
6 7/8
7 3/4
8 19/32
9 7/16
10 5/16
12 11/32
i
inch
2 9/32
2 25/32
3 1/4
3 11/16
4 1/4
4 3/4
5 3/8
5 7/8
6 1/2
7 9/16
j
inch
2 1/2
3 1/8
3 23/32
4 3/16
4 7/8
5 3/8
6 3/32
6 11/16
7 1/4
8 7/8
k
inch
7
/8
1 3/32
1 9/32
1 9/32
1 7/16
1 5/8
1 31/32
1 31/32
2 11/32
2 11/32
weight
each
kg
0.34
0.63
1
1.44
2.21
3.18
4.32
5.67
7.36
12.38
2
3
4
5
In inch
7
8
9
10
11
12
13
14
15
16
26
weight
each
lbs
0.75
1.39
2.21
3.17
4.86
7.01
9.52
12.49
16.23
27.29
Material
Safety Factor
Standard
Finish
Certificates
:
:
:
:
:
bow and pin high tensile steel, Grade 6, quenched and tempered
MBL equals 6 x WLL
meets performance requirements of US Fed. Spec. RR-C-271, Grade A
hot dipped galvanized
at no extra charges this product can be supplied with a works certificate, certificate of
basic raw material, manufacturer test certificate and/or EC Declaration of Conformity
Shackles
G-4154
working diameter diameter diameter
load
bow
pin
eye
limit
a
b
c
tons
mm
mm
mm
2
13.5
16
34
3.25
16
19
40
4.75
19
22
47
6.5
22
25
53
8.5
25
28
60
9.5
28
32
67
12
32
35
74
13.5
35
38
80
17
38
42
89
25
45
50
104
width
eye
width
inside
length
inside
length
length
bolt
width
d
mm
13.5
16
19
22
25
28
32
35
38
45
e
mm
22
27
31
36
43
47
51
57
60
74
f
mm
43
51
59
73
85
90
94
115
127
149
g
mm
85
105
125
144
161
179
199
220
239
283
h
mm
58
71
82
93
108
120
137
149
164
192
i
mm
22
27
32
32
36
41
50
50
60
60
weight
each
kg
0.32
0.58
0.92
1.33
2.03
2.88
3.96
5.24
6.8
11.22
1
2
3
4
5
In inch
width
eye
width
inside
length
inside
length
length
bolt
width
d
inch
17
/32
5
/8
3
/4
7
/8
1
1 1/8
1 9/32
1 3/8
1 17/32
1 25/32
e
inch
7
/8
1 3/32
1 1/4
1 7/16
1 23/32
1 7/8
2
2 1/4
2 11/32
2 29/32
f
inch
1 23/32
2
2 5/16
2 7/8
3 11/32
3 9/16
3 23/32
4 17/32
5
5 7/8
g
inch
3 11/32
4 1/8
4 29/32
5 11/16
6 5/16
7 1/32
7 13/16
8 11/16
9 3/8
11 5/32
h
inch
2 9/32
2 25/32
3 1/4
3 11/16
4 1/4
4 3/4
5 3/8
5 7/8
6 1/2
7 9/16
i
inch
7
/8
1 3/32
1 9/32
1 9/32
1 7/16
1 5/8
1 31/32
1 31/32
2 11/32
2 11/32
weight
each
lbs
0.7
1.28
2.03
2.93
4.48
6.35
8.72
11.56
15
24.74
7
8
9
10
11
12
13
14
15
16
27
Shackles
Material
Safety Factor
Standard
Finish
Certificates
Note
:
:
:
:
:
bow and pin high tensile steel, Grade 6, quenched and tempered
MBL equals 6 x WLL
meets performance requirements of US Fed. Spec. RR-C-271, Grade A
hot dipped galvanized
at no extra charges this product can be supplied with a works certificate, certificate of
basic raw material, manufacturer test certificate and/or EC Declaration of Conformity
: key for unscrewing the pin must be ordered separately
G-4169
working diameter diameter diameter width
load
bow
pin
eye
eye
limit
a
b
c
d
tons
mm
mm
mm
mm
2
13.5
16
34
13.5
3.25
16
19
40
16
4.75
19
22
47
19
6.5
22
25
53
22
8.5
25
28
60
25
9.5
28
32
67
28
12
32
35
74
32
13.5
35
38
80
35
17
38
42
89
38
width
inside
length
inside
width
bow
length
length
bolt
width
size
hole
weight
each
e
mm
22
27
31
36
43
47
51
57
60
f
mm
51
64
76
83
95
108
115
133
146
g
mm
32
43
51
58
68
75
83
92
99
h
mm
91
114
136
157
176
197
218
240
262
i
mm
51
53
74
85
99
110
122
135
145
j
mm
76
93
107
123
141
158
176
192
208
k
mm
10
10
10
12
12
16
16
16
16
kg
0.31
0.56
0.98
1.46
2.18
3.06
4.24
5.59
7.37
width
inside
length
inside
width
bow
length
length
bolt
width
size
hole
weight
each
e
mm
7
/8
1 3/32
1 1/4
1 7/16
1 23/32
1 7/8
2
2 1/4
2 11/32
f
mm
2
2 17/32
3
3 9/32
3 3/4
4 1/4
4 17/32
5 1/4
5 3/4
h
mm
3 19/32
4 1/2
5 3/8
6 3/16
6 7/8
7 3/4
8 19/32
9 7/16
10 5/16
i
mm
2
2 3/32
2 29/32
3 11/32
3 29/32
4 5/16
4 13/16
5 5/16
5 3/4
k
mm
3
/8
3
/8
3
/8
1
/2
1
/2
1
/2
5
/8
5
/8
5
/8
lbs
0.68
1.23
2.16
3.22
4.81
6.75
9.35
12.32
16.25
2
3
4
5
In inch
6
7
8
9
P-4170
10
11
12
13
14
15
16
28
g
mm
1 9/32
1 23/32
2
2 9/32
2 11/16
2 15/16
3 9/32
3 5/8
3 7/8
j
mm
3
3 11/16
4 1/4
4 7/8
5 9/16
6 1/4
7
7 9/16
8 3/16
Material
Safety Factor
Standard
Finish
Certificates
Note
:
:
:
:
:
bow and pin high tensile steel, Grade 6, quenched and tempered
MBL equals 6 x WLL
meets performance requirements of US Fed. Spec. RR-C-271, Grade A
hot dipped galvanized
at no extra charges this product can be supplied with a works certificate, certificate of
basic raw material, manufacturer test certificate and/or EC Declaration of Conformity
: key for unscrewing the pin must be ordered separately
Shackles
G-4159
working diameter diameter diameter
load
bow
pin
eye
limit
a
b
c
tons
mm
mm
mm
2
13.5
16
34
3.25
16
19
40
4.75
19
22
47
6.5
22
25
53
8.5
25
28
60
9.5
28
32
67
12
32
35
74
13.5
35
38
80
17
38
42
89
width
eye
width
inside
length
inside
length
length
bolt
size
hole
weight
each
d
mm
13.5
16
19
22
25
28
32
35
38
e
mm
22
27
31
36
43
47
51
57
60
f
mm
43
51
59
73
85
90
94
115
127
g
mm
85
105
125
144
161
179
199
220
239
h
mm
51
53
74
85
99
110
122
135
145
i
mm
10
10
10
12
12
16
16
16
16
kg
0.34
0.6
0.98
1.26
2.14
3.05
3.56
5.17
6.84
1
2
3
4
5
In inch
P-4170
width
eye
width
inside
length
inside
length
length
bolt
size
hole
weight
each
d
inch
17
/32
5
/8
3
/4
7
/8
1
1 1/8
1 9/32
1 3/8
1 17/32
e
inch
7
/8
1 3/32
1 1/4
1 7/16
1 23/32
1 7/8
2
2 1/4
2 11/32
f
inch
1 23/32
2
2 5/16
2 7/8
3 11/32
3 9/16
3 23/32
4 17/32
5
g
inch
3 11/32
4 1/8
4 29/32
5 11/16
6 5/16
7 1/32
7 13/16
8 11/16
9 3/8
h
inch
2
2 3/32
2 29/32
3 11/32
3 29/32
4 5/16
4 13/16
5 5/16
5 3/4
i
inch
3
/8
3
/8
3
/8
1
/2
1
/2
1
/2
5
/8
5
/8
5
/8
lbs
0.75
1.33
2.15
2.77
4.72
6.72
7.84
11.4
15.08
7
8
9
10
11
12
13
14
15
16
29
Shackles
Mooring Shackles
bow shackles with screw pin
Material
Finish
Note
S-1165
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
width
bow
weight
each
a
mm
32
38
45
50
65
b
mm
32
38
45
50
65
c
mm
74
89
104
119
145
d
mm
64
76
90
100
130
e
mm
134
160
189
210
273
f
mm
96
114
135
155
195
kg
4.2
7.8
12.5
17.4
35.6
1
2
3
4
5
Crown Shackles
dee shackles with round pin, for anchoring applications
Material
Finish
Pin
Note
:
:
:
:
8
S-3557
9
10
11
12
13
14
15
16
30
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
weight
each
a
mm
13.5
16
19
22
28
b
mm
16
19
22
25
32
c
mm
34
40
47
53
67
d
mm
21
27
30
33
42
e
mm
49
61
67
73
91
kg
0.3
0.6
0.9
1.3
2.7
Shackles
Crown Shackles
dee shackles with round pin, for anchoring applications
Material
Finish
Pin
Note
Certificates
:
:
:
:
:
S-3559
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
a
mm
32
42
50
60
65
75
80
90
100
110
130
140
150
160
170
180
190
b
mm
35
45
52
68
72
80
90
100
110
125
140
150
160
170
180
190
200
c
mm
83
110
134
150
159
172
190
215
245
270
308
335
350
360
390
410
430
d
mm
47
60
73
90
100
110
125
140
155
175
200
210
220
235
250
270
280
e
mm
111
139
158
211
221
246
276
307
339
385
430
475
525
560
610
650
690
weight
each
kg
4
8
13.3
25
32
50
65
94
127
178
269
335
413
500
601
716
839
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
31
Shackles
S-3461
G-3461
Material
Safety Factor
Standard
Finish
Certificates
no.
8
10
12
16
20
25
:
:
:
:
:
width
inside
length
inside
width
bow
weight
each
e
mm
60
66
73
81
90
100
f
mm
152
166
184
210
231
254
g
mm
93
102
114
128
140
155
kg
8.44
11
14.5
19.7
29.6
37.4
weight
each
1
2
3
4
5
7
8
Material
Safety Factor
Standard
Finish
Certificates
Note
no.
10
S-3466
G-3466
11
12
13
14
15
16
32
8
10
12
16
20
25
32
40
50
63
80
100
:
:
:
:
:
width
inside
length
inside
width
bow
e
mm
60
66
73
81
90
100
110
125
140
155
175
200
f
mm
152
166
184
210
231
254
285
315
360
395
447
500
g
mm
93
102
114
128
140
155
175
195
220
245
275
305
kg
9.3
12
15.7
21
31.4
39.4
53.3
75.3
105
137
200
300
Shackles
S-3351
G-3351
Material
Safety Factor
Standard
Finish
Certificates
no.
0.1
0.16
0.25
0.4
0.6
1
1.6
2
2.5
3
4
5
6
8
10
12
16
20
25
:
:
:
:
:
width
inside
e
mm
7
8
11
14
17
21
27
30
33
38
42
47
53
60
66
73
81
90
100
length
inside
f
mm
15.5
18
24
30
36
49
61
67
73
83.5
91
111
119.5
139.5
147
158
185
211
221
weight
each
kg
0.017
0.024
0.054
0.097
0.18
0.3
0.57
0.975
1.3
1.85
2.53
4
5.3
7.9
10
13.5
19.2
28
34
1
2
3
4
5
S-3352
G-3352
Material
Safety Factor
Standard
Finish
Certificates
no.
0.1
0.16
0.25
0.4
0.6
1
1.6
2
2.5
3
4
5
6
8
10
:
:
:
:
:
length
inside
f
mm
15.5
18
24
30
36
49
61
67
73
83.5
91
111
119.5
139.5
147
7
8
9
weight
each
10
kg
0.014
0.023
0.052
0.093
0.173
0.29
0.543
0.95
1.23
1.8
2.6
3.8
5.2
7.6
9.7
11
12
13
14
15
16
33
Shackles
Material
Safety Factor
Standard
Finish
Certificates
Note
no.
S-3356
G-3356
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
34
0.4
0.6
1
1.6
2
2.5
3
4
5
6
8
10
12
16
20
25
32
40
50
63
80
100
:
:
:
:
:
width
inside
e
mm
14
17
21
27
30
33
38
42
47
53
60
66
73
81
90
100
110
125
140
155
175
200
length
inside
weight
each
f
mm
30
36
49
61
67
73
83.5
91
111
119.5
139.5
147
158
185
211
221
246
276
307
339
385.5
430
kg
0.113
0.2
0.37
0.686
1.125
1.5
2.15
2.93
4.7
6.33
8.5
10.8
14.4
20.5
29.5
36
49
75
100
140
200
280
Shackles
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
35
Shackles
G-3161
working
load
limit
tons
0.33
0.5
0.75
1
1.5
2
3.25
4.75
6.5
8.5
9.5
12
13.5
17
25
1
2
3
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
width
bow
weight
each
a
mm
5
6
8
10
11
13
16
19
22
25
28
32
35
38
45
b
mm
6
8
10
11
13
16
19
22
25
28
32
35
38
42
50
c
mm
14
16
19
23
27
30
38
46
53
61
68
76
84
92
106
d
mm
9.5
12
13.5
17
19
20
27
32
36
43
46
51
57
60
73
e
mm
22
29
31
37
43
48
60
71
84
95
108
119
133
146
177
f
mm
15
20
21
26
29
33
43
50
58
68
74
82
92
98
127
kg
0.03
0.05
0.09
0.14
0.17
0.33
0.62
1.07
1.64
2.28
3.36
4.31
6.14
7.81
12.61
4
5
6
Material
Standard
Finish
7
8
G-3163
working
load
limit
10
tons
2
3.25
4.75
6.5
8.5
9.5
12
13.5
17
25
11
12
13
14
15
16
36
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
width
bow
weight
each
a
mm
13
16
19
22
25
28
32
35
38
45
b
mm
16
19
22
25
28
32
35
38
42
50
c
mm
30
38
46
53
61
68
76
84
92
106
d
mm
20
27
32
36
43
46
51
57
60
73
e
mm
48
60
71
84
95
108
119
133
146
177
f
mm
33
43
50
58
68
74
82
92
98
127
kg
0.36
0.76
1.23
1.79
2.57
3.75
5.32
7.19
9.44
15.4
Shackles
G-3151
working
load
limit
tons
0.33
0.5
0.75
1
1.5
2
3.25
4.75
6.5
8.5
9.5
12
13.5
17
25
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
weight
each
a
mm
5
6
8
10
11
13
16
19
22
25
28
32
35
38
45
b
mm
6
8
10
11
13
16
19
22
25
28
32
35
38
42
50
c
mm
12
16
19
23
27
30
38
46
53
61
68
76
84
92
106
d
mm
9.5
12
13.5
17
19
20
27
32
36
43
46
51
57
60
73
e
mm
19
22
26
32
37
41
51
60
71
81
90
100
111
122
146
kg
0.01
0.05
0.08
0.13
0.2
0.27
0.57
1.19
1.43
2.16
3.06
4.11
5.28
7.24
12.14
1
2
3
4
5
6
Material
Standard
Finish
7
8
G-3153
working
load
limit
tons
2
3.25
4.75
6.5
8.5
9.5
12
13.5
17
25
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
weight
each
a
mm
13
16
19
22
25
28
32
35
38
45
b
mm
16
19
22
25
28
32
35
38
42
50
c
mm
30
38
46
53
61
68
76
84
92
106
d
mm
20
27
32
36
43
46
51
57
60
73
e
mm
41
51
60
71
81
90
100
111
122
146
kg
0.34
0.67
1.14
1.75
2.52
3.45
4.91
6.24
8.4
14.26
9
10
11
12
13
14
15
16
37
Shackles
Material
Safety Factor
Standard
Finish
Certificates
:
:
:
:
:
working
load
limit
diameter
bow
diameter
pin
diameter
eye
inside
width
inside
length
width
bow
weight
each
a
mm
6
10
13
16
19
22
25
28
32
35
38
42
44
48
51
57
60
67
73
79
86
95
108
117
b
mm
10
13
16
19
22
25
28
32
35
38
44
48
51
54
57
63
67
73
79
86
92
102
117
127
c
mm
19
25
32
38
44
51
57
63
70
76
89
94
102
108
114
127
133
146
159
171
184
203
235
254
d
mm
13
16
22
28
35
41
44
51
57
63
70
76
86
92
98
105
111
121
133
146
159
171
197
216
e
mm
28
41
54
70
86
98
108
124
137
152
168
187
206
222
238
257
273
302
330
359
387
429
483
533
f
mm
19
25
32
41
51
57
64
73
83
89
98
111
121
130
140
152
162
178
197
213
229
254
286
308
kg
0.12
0.18
0.37
0.72
1.20
1.85
2.61
3.78
5.17
6.46
8.34
11.1
14.5
17.8
25.5
34.4
36.8
45
62.2
81.8
95
131
194
274
S-2761
E-2761
G-2761
tons
0.15
0.45
0.75
1.25
2
2.75
3.75
4.75
5.75
7.25
8.5
9.5
11.5
13
15
18.5
20
25
30
35
40
50
65
80
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
38
Shackles
Material
Safety Factor
Standard
Finish
Certificates
:
:
:
:
:
working
load
limit
diameter
bow
diameter
pin
diameter
eye
inside
width
inside
length
width
bow
weight
each
a
mm
6
10
13
16
19
22
25
28
32
35
38
41
44
48
51
54
57
63
70
76
79
89
102
114
b
mm
10
13
16
19
22
25
28
32
35
38
44
48
51
54
57
60
63
70
79
86
89
98
114
127
c
mm
19
25
32
38
44
51
57
63
70
76
89
95
102
108
114
121
127
140
159
171
178
203
229
254
d
mm
13
16
22
28
35
38
44
51
57
60
67
73
79
86
92
95
105
114
127
137
143
159
184
206
e
mm
25
38
51
64
76
89
102
114
127
140
152
165
178
191
203
216
229
254
279
305
318
356
406
457
f
mm
16
22
29
38
44
51
60
67
76
83
89
98
105
114
121
127
137
152
168
184
191
213
244
273
kg
0.11
0.17
0.35
0.66
1.06
1.68
2.47
3.48
4.79
5.95
7.55
9.79
12.5
15.3
21.8
28.9
30.9
37.8
52.6
69.5
78.1
109
163
235
S-2765
E-2765
G-2765
tons
0.2
0.5
1
1.5
2
3
4
5
6.25
7.5
9.25
10.5
12.5
14.25
16.5
18.5
20
25
30
35
40
50
65
80
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
39
Shackles
Material
Safety Factor
Standard
Finish
Certificates
:
:
:
:
:
S-2751
E-2751
G-2751
working
load
limit
tons
0.25
0.5
0.75
1.5
2
3
3.75
5
6
7
9.5
11.25
13
14.25
16.25
18
20
25
30
35
40
50
65
80
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
40
diameter
bow
diameter
pin
diameter
eye
inside
width
inside
length
weight
each
a
mm
6
10
13
16
19
22
25
28
32
35
38
42
44
48
51
54
57
64
70
76
79
89
102
114
b
mm
10
13
16
19
22
25
28
32
35
38
45
48
51
54
57
60
64
73
79
86
89
102
114
127
c
mm
19
25
32
38
44
51
57
64
70
76
83
89
95
108
114
121
127
146
159
171
178
203
229
254
d
mm
13
19
28
32
38
44
51
54
60
67
70
76
83
92
98
105
108
121
133
146
149
171
191
219
e
mm
25
38
54
64
73
83
95
105
114
127
137
146
156
178
187
197
210
235
260
279
292
330
375
419
kg
0.11
0.17
0.35
0.66
1.02
1.57
2.3
3.2
4.3
5.4
6.8
8.7
11
14.3
20
26.4
28.3
35
49
63.6
71.7
101
151
215
Shackles
Material
Safety Factor
Standard
Finish
Certificates
:
:
:
:
:
S-2755
E-2755
G-2755
working
load
limit
tons
0.3
0.6
1
1.75
2.5
3.5
4.5
5.5
7
8
10.75
13
14.75
16.75
19
20
25
30
35
40
50
65
80
diameter
bow
diameter
pin
diameter
eye
a
mm
6
10
13
16
19
22
25
28
32
35
38
42
44
48
51
54
60
64
70
73
83
92
102
b
mm
10
13
16
19
22
25
28
32
35
38
45
48
51
54
57
60
70
73
79
83
95
108
117
c
mm
19
25
32
38
44
51
57
64
70
83
89
95
102
108
114
121
140
146
159
165
190
216
235
width
inside
d
mm
9.5
16
22
25
32
35
38
44
48
54
60
64
70
73
76
83
92
98
108
111
127
140
156
length
inside
weight
each
e
mm
22
35
48
57
70
83
92
105
114
127
140
149
162
171
184
197
219
229
254
264
298
333
368
kg
0.1
0.16
0.31
0.59
0.98
1.55
2.2
3.1
4.2
5.1
6.6
8.1
10.5
13.3
19.2
22.4
25.3
31.5
47
60.2
68.5
98
147
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
41
Shackles
Commercial Shackles
bow shackles with screw collar pin
Material
Finish
Note
S-1161
E-1161
1
2
3
4
5
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
width
bow
a
mm
5
6
8
10
11
12
14
16
20
22
25
28
32
38
45
50
57
65
b
mm
5
6
8
10
11
12
14
16
20
22
25
28
32
38
45
50
57
65
c
mm
10
12
16
20
22
24
28
32
40
44
50
56
64
76
90
100
114
130
d
mm
10
12
16
20
22
24
28
32
40
44
50
56
64
76
90
100
114
130
e
mm
20
24
32
40
44
48
56
64
80
88
100
112
128
152
180
200
228
260
f
mm
15
18
24
30
33
36
42
48
60
66
75
84
96
114
135
150
171
195
weight
per
100 pcs
kg
1.54
2.66
6.29
12.3
16.4
21.2
33.7
50.3
98.3
131
192
270
403
674
1120
1536
2276
3375
Commercial Shackles
bow shackles with square head screw pin
6
Material
Finish
Note
7
8
S-1164
9
10
11
12
13
14
15
16
42
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
width
bow
a
mm
6
8
10
11
12
14
16
20
22
25
28
32
38
b
mm
6
8
10
11
12
14
16
20
22
25
28
32
38
c
mm
12
16
20
22
24
28
32
40
44
50
56
64
76
d
mm
12
16
20
22
24
28
32
40
44
50
56
64
76
e
mm
24
32
40
44
48
56
64
80
88
100
112
128
152
f
mm
18
24
30
33
36
42
48
60
66
75
84
96
114
weight
per
100 pcs
kg
2.7
6.4
12.5
16.6
21.6
34.3
51.2
100
133
195
275
410
686
Shackles
Commercial Shackles
bow shackles with counter sunk screw pin
Material
Finish
Note
S-1162
E-1162
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
width
bow
a
mm
8
10
11
12
14
16
20
22
25
b
mm
8
10
11
12
14
16
20
22
25
c
mm
16
20
22
24
28
32
40
44
50
d
mm
16
20
22
24
28
32
40
44
50
e
mm
32
40
44
48
56
64
80
88
100
f
mm
24
30
33
36
42
48
60
66
75
weight
per
100 pcs
kg
6
11.6
15.5
20.1
31.9
47.6
93.1
124
182
1
2
3
4
5
Commercial Shackles
dee shackles with screw collar pin
6
Material
Finish
Note
7
8
S-1151
E-1151
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
a
mm
5
6
8
10
11
12
14
16
20
22
25
28
32
38
45
50
57
65
b
mm
5
6
8
10
11
12
14
16
20
22
25
28
32
38
45
50
57
65
c
mm
10
12
16
20
22
24
28
32
40
44
50
56
64
76
90
100
114
130
d
mm
10
12
16
20
22
24
28
32
40
44
50
56
64
76
90
100
114
130
e
mm
19
25
32
38
44
51
53
64
76
89
100
115
127
152
180
200
220
247
weight
per
100 pcs
10
kg
1.47
2.56
6.06
11.8
15.8
20.5
32.5
48.5
94.7
126
185
260
388
650
1080
1480
2192
3252
11
12
13
14
15
16
43
Shackles
Commercial Shackles
dee shackles with square head screw pin
Material
Finish
Note
S-1154
1
2
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
a
mm
6
8
10
11
12
14
16
20
22
25
28
32
38
b
mm
6
8
10
11
12
14
16
20
22
25
28
32
38
c
mm
12
16
20
22
24
28
32
40
44
50
56
64
76
d
mm
12
16
20
22
24
28
32
40
44
50
56
64
76
e
mm
24
32
40
44
48
56
64
80
88
100
112
128
152
weight
per
100 pcs
kg
2.6
6.17
12.0
16
20.8
33.1
49.4
96.4
128
188
265
395
661
3
4
5
Commercial Shackles
dee shackles with counter sunk screw pin
6
Material
Finish
Note
7
8
S-1152
E-1152
9
10
11
12
13
14
15
16
44
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
a
mm
8
10
11
12
14
16
20
22
25
b
mm
8
10
11
12
14
16
20
22
25
c
mm
16
20
22
24
28
32
40
44
50
d
mm
16
20
22
24
28
32
40
44
50
e
mm
32
40
44
48
56
64
80
88
100
weight
per
100 pcs
kg
5.72
11.2
14.9
19.3
30.7
45.8
89.5
119
175
Shackles
Commercial Shackles
danlino V shackles with square head screw pin
Material
Finish
Note
S-1170
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
a
mm
32
b
mm
32
c
mm
64
d
mm
78
e
mm
120
weight
per
100 pcs
kg
470
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
45
Thimbles
Applications
Thimbles are used to protect steel wire rope, fibre rope or synthetic rope.
They are available in various models and sizes. All indicated types of thimbles can be used in combination
with the above mentioned types of ropes.
Range
Van Beest offers a wide range of thimbles, from nationally standardized models to all types of commercially
available thimbles.
Design
Thimbles can be cold-rolled, hot-rolled or die-cast, depending on the specific use of the thimbles.
Finish
The finish is either painted, electro-galvanized or hot dipped galvanized, unless otherwise specified.
2
Certification
Upon request, all thimbles can be supplied with a works certificate.
46
Thimbles
Thimbles
standard commercial
Material
Finish
Certification
: mild steel
: electro-galvanized
: a works certificate can be supplied upon request
diameter
rope
width
groove
length
width
length
inside
width
inside
mm
4
5
6
7
8
9
10
11
12
14
16
18
20
22
24
26
28
30
32
a
mm
4
5
6
7
8
9
10
11
12
14
16
18
20
22
24
26
28
30
32
b
mm
25
31
37
44
51
57
64
70
76
82
89
102
115
127
140
152
165
178
203
c
mm
19
22
29
32
38
42
44
51
57
60
64
69
79
89
102
105
115
121
133
d
mm
16
22
26
32
34
38
42
48
51
57
60
67
76
83
88
102
110
115
140
e
mm
11
16
19
22
24
29
32
35
38
40
42
45
51
54
64
68
73
79
93
E-6110
weight
per
100 pcs
kg
0.4
0.8
1.4
2
2.8
3
4.8
7.5
8
10
15
22
25
32
46
66
77
80
130
1
2
3
4
5
6
Thimbles
heavy duty stub-end
Material
Finish
Certification
: mild steel
: electro-galvanized
: a works certificate can be supplied upon request
diameter
rope
width
groove
length
length
inside
width
inside
thickness
back
mm
8
10
12
14
16
18
20
22
24
28
32
36
40
44
50
56
64
a
mm
8
10
12
14
16
18
20
22
24
28
32
36
40
44
50
56
64
b
mm
51
64
76
89
102
114
127
140
152
178
203
229
254
279
305
356
407
c
mm
35
47
57
65
76
86
94
107
114
130
157
177
198
214
215
245
275
d
mm
22
30
35
45
50
53
60
65
70
80
100
115
120
130
140
160
180
e
mm
4
4
5
6
6
8
9
10
10
10.5
10.5
12
12
15
20
20
20
E-6120
8
weight
per
100 pcs
kg
6
7
14
22
24
43
65
93
102
135
162
363
376
608
960
1400
1700
9
10
11
12
13
14
15
16
47
Thimbles
Thimbles
generally to DIN 6899 (B)
Material
Standard
Finish
Certification
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
48
mild steel
generally to DIN 6899 (B)
electro-galvanized
a works certificate can be supplied upon request
diameter
rope
width
groove
length
length
inside
width
inside
thickness
back
mm
2.5
3.5
4
5
6
7
9
11
13
13
15
16
17
18
20
22
24
26
28
30
32
34
36
38
40
42
a
mm
3
4
5
6
7
8
10
12
13
14
16
17
18
20
22
24
26
28
30
32
34
36
38
40
42
45
b
mm
22
26
32
38
44
51
57
64
70
76
83
89
95
102
114
127
140
152
165
178
203
216
229
241
254
305
c
mm
19
21
23
25
28
32
38
45
48
51
58
61
64
72
80
90
99
112
120
128
152
160
176
184
192
240
d
mm
12
13
14
16
18
20
24
28
30
32
36
38
40
45
50
56
62
70
75
80
95
100
110
115
120
150
e
mm
1.6
1.6
1.9
2.4
2.4
2.8
3.1
3.3
3.3
3.7
3.8
4.7
4.7
5.7
5.7
6.5
6.8
8
8
8
8.5
8.5
8.5
10.5
10.5
10.5
E-6131
:
:
:
:
weight
per
100 pcs
kg
0.5
0.8
1
1.6
1.9
3
4.7
6.8
8
10
14.5
18
20
29
32
47
59
80
110
123
156
176
192
292
320
364
Thimbles
Thimbles
generally to DIN 6899 (C)
Material
Standard
Finish
Certification
:
:
:
:
mild steel
generally to DIN 6899 (C)
hot dipped galvanized
a works certificate can be supplied upon request
diameter
rope
width
groove
length
inside
mm
11
12
14
16
18
20
22
24
26
28
32
36
40
44
48
a
mm
12
13
15
18
20
22
24
26
28
31
35
40
44
48
53
b
mm
59
64
75
86
96
107
118
128
139
150
171
192
215
235
257
width
inside
thickness
back
G-6132
c
mm
27.5
30
35
40
45
50
55
60
65
70
80
90
100
110
120
d
mm
6.5
7
8
9.5
11
12
13
14.5
15.5
17
19
21.5
24
26.5
29
weight
per
100 pcs
kg
24
25
35
65
102
135
179
227
264
400
520
575
1010
1180
1940
1
2
3
4
5
Thimbles
generally to DIN 83311
Material
Standard
Finish
Certification
:
:
:
:
mild steel
generally to DIN 83311
hot dipped galvanized
a works certificate can be supplied upon request
8
nominal
size
width
groove
length
inside
0.4
0.6
1
1.6
2
2.5
3
4
5
6
8
10
12
16
20
25
31
40
a
mm
8
11
13
15
17
19
21
24
28
30
34
38
42
46
50
56
62
68
b
mm
36
50
60
68
76
85
95
110
125
135
150
170
190
205
225
250
280
306
G-6133
width
inside
c
mm
20
28
32
38
42
48
53
60
70
75
85
95
105
115
125
140
155
170
thickness
back
d
mm
3
4
5
6
7
8
9
10
10.5
12
13
15
16
16
18
20
21
23
weight
per
100 pcs
9
10
kg
4.5
9.5
18
24
38
50
70
110
141
254
282
418
513
550
930
1303
1363
1930
11
12
13
14
15
16
49
Thimbles
Thimbles
generally to DIN 3090
Material
Standard
Finish
: mild steel
: generally to DIN 3090
: for diameter 4 and 6 mm electro-galvanized
other diameters hot dipped galvanized
: a works certificate can be supplied upon request
Certification
E-6135
G-6135
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
50
diameter
wire
rope
mm
4
6
8
10
12
14
16
18
20
22
24
26
28
32
36
40
44
48
52
56
60
64
68
72
76
80
width
groove
width
overall
width
inside
length
inside
a
mm
5
7
9
11
13
16
18
20
22
24
26
29
31
35
40
44
48
53
57
62
66
70
75
79
84
88
b
mm
9
12
13
16
19
22
25
27
32
33
37
46
50
55
60
65
70
75
80
85
90
95
100
105
115
120
c
mm
10
15
20
25
30
35
40
45
50
55
60
65
70
80
90
100
110
120
130
140
150
160
170
180
190
200
d
mm
20
30
40
50
60
70
80
90
100
110
120
130
140
160
180
200
220
240
260
280
300
320
340
360
380
400
thickness thickness
back
e
mm
5.1
7.1
11
14
16
17
19
21
23
24
27
30
33
38
42
46
53
58
64
67
70
78
81
84
87
90
f
mm
2.1
2.6
4
5
6
7
8
9
10
10
11
12
12
14
16
18
20
22
25
25
25
30
30
30
30
30
weight
per
100 pcs
kg
1.4
3
7.1
17
24
36
50
62
90
100
130
220
240
270
430
570
850
1120
1530
2148
2300
3500
3700
4100
4600
5400
Thimbles
Thimbles
generally to DIN 3091
Material
Standard
Finish
Certification
:
:
:
:
diameter
rope
width
groove
width
length
diameter
length
mm
8
10
12
14
16
18
20
22
24
26
28
32
36
40
44
48
52
56
64
72
80
a
mm
9
11
13
16
18
20
22
24
26
29
31
35
40
44
48
53
57
62
70
79
88
b
mm
40
50
60
70
80
90
100
110
120
130
140
160
180
200
220
240
260
280
320
360
400
c
mm
66
82
98
114
130
145
161
177
193
209
224
256
288
320
352
384
416
448
512
576
640
d
mm
14
18
21
25
28
31
35
38
41
44
47
53
59
65
70
76
81
86
95
104
112
e
mm
16
18
20
22
24
26
28
32
36
40
44
48
52
56
64
72
80
S-6134
weight
per
100 pcs
kg
18
32
52
80
90
121
161
211
271
355
420
630
884
1100
1500
2000
2500
3200
4600
6600
9000
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
51
Thimbles
Thimbles
generally to BS 464
G-6170
Material
Standard
Finish
Certification
width
groove
length
length
inside
width
inside
thickness
back
inches
a
mm
b
mm
c
mm
d
mm
e
mm
kg
6
8
10
13
14
15
17
19
20
21
23
25
27
29
33
38
41
46
51
60
64
64
67
70
86
48
54
64
73
80
80
98
108
124
124
133
146
162
178
197
229
254
254
286
318
330
330
356
413
502
30
33
38
41
44
44
59
67
73
73
83
92
108
111
133
152
165
165
178
191
203
203
216
241
273
20
22
25
29
32
32
41
44
51
51
57
64
70
76
95
105
114
114
127
133
140
140
146
159
203
3.5
4
4.8
4.8
5.6
5.6
7.9
7.9
9.5
9.5
9.5
10.3
10.3
12.7
12.7
15.9
17.5
17.5
25.4
28.6
28.6
28.6
30.2
31.8
41.3
5.4
5.7
7.6
14.2
18
18.9
34
39.7
62.4
62.4
75.6
106
125
151
204
318
488
499
556
-
/4
5
/16
3
/8
7
/16
1
/2
9
/16
5
/8
11
/16
3
/4
13
/16
7
/8
15
/16
1
1
1
1
1
1
1
1
1
2
2
2
2
2
3
4
5
mild steel
generally to BS 464
hot dipped galvanized
a works certificate can be supplied upon request
diameter
rope
:
:
:
:
/8
/4
3
/8
1
/2
5
/8
3
/4
7
/8
1
/8
/4
1
/2
3
/4
1
weight
per
100 pcs
Thimbles
Material
Standard
Finish
Certification
9
10
diameter
rope
length
width
length
inside
width
inside
thickness
back
a
inches
b
inches
c
inches
d
inches
e
inches
f
inches
G-6142
11
12
13
1
1
1
1
1
1
1
2
2
3
14
15
16
52
: mild steel
: generally to US Federal Specification
FF-T-276b type III
: hot dipped galvanized
: a works certificate can be supplied upon request
/4
5
/16
7
/16
1
/2
9
/16
5
/8
3
/4
7
/8
7
/8
1
/ 8 - 1 1/ 4
1
/ 4 - 1 3/ 8
3
/ 8 - 1 1/ 2
5
/8
3
/4
7
/8 - 2
1
/4
1
/2
2
2
3
3
3
4
5
5
6
7
8
9
11
12
15
17
18
20
/16
1
/2
1
/4
5
/8
5
/8
1
/4
1
1
/2
/8
/16
/4
/16
1
/8
1
/8
1
/4
1
/4
1
1
2
2
2
3
3
4
4
5
6
7
8
8
10
11
12
14
/2
13
/16
3
/8
3
/4
11
/16
1
/8
13
/16
1
/4
15
/16
7
/8
13
/16
1
/8
1
/8
1
/2
3
/8
7
/8
1
/4
1
1
2
2
2
3
3
4
4
5
6
6
8
9
12
14
14
16
/8
7
/8
3
/8
3
/4
3
/4
1
/4
3
/4
1
/4
1
/2
1
/8
1
/4
1
/2
7
1
/8
/2
1
1
1
1
1
2
2
2
2
3
3
4
4
6
7
7
7
/8
1
/16
1
/4
1
/2
1
/2
3
/4
1
/4
/2
7
/8
1
/2
1
/2
1
/2
/8
/16
5
/64
1
/8
9
/64
9
/64
5
/32
7
/32
7
/32
1
/4
1
/4
1
/2
1
/2
1
/2
1
/2
1
/2
1
/2
3
/4
3
/4
weight
per
100 pcs
kg
3.4
6.3
16.2
23
23
33.8
66.2
83.3
135
185
375
540
731
810
1170
1935
-
Thimbles
Thimbles
towing type
G-6160
Material
Finish
Certification
Options
:
:
:
:
mild steel
hot dipped galvanized
a works certificate can be supplied upon request
thicker material
reinforced back
welded fillet plate
various links
keeper bands
circumference width
rope
groove
inches
5
6
7
8
9
10
12
13
14
15
16
a
mm
44
54
62
70
80
90
100
120
130
150
160
length
width
inside
length
inside
thickness
back
b
mm
200
230
270
290
360
400
430
480
490
520
550
c
mm
90
100
120
130
150
160
170
170
180
190
200
d
mm
140
160
190
200
235
245
260
280
300
310
320
e
mm
6
8
8
8
10
10
10
13
13
15
15
weight
per
piece
kg
2
3
4
5
9.5
11.5
13.5
22
24
29
37
1
2
3
4
5
Thimbles
G-6151
diameter
wire
rope
mm
16
18
20
22
24
30
36
40
44
50
56
64
76
82
90
120
: mild steel
: hot dipped galvanized
produced with a welded fillet plate
: a works certificate can be supplied upon request
width
groove
length
width
length
inside
a
mm
17
19
21
23
25
33
38
41
46
52
56
70
81
92
105
130
b
mm
102
115
127
140
153
205
230
255
280
305
360
435
485
560
610
660
c
mm
75
85
100
110
115
155
175
190
210
225
240
290
320
375
410
450
d
mm
75
80
90
95
120
160
185
195
215
240
250
310
360
405
450
480
width
inside
e
mm
50
53
60
65
70
100
115
120
130
140
150
180
220
240
250
280
8
9
weight
per
piece
10
kg
0.4
0.5
0.8
0.9
1
2.5
4
4.5
7
8.3
12.5
19.5
29
35
42
58
11
12
13
14
15
16
53
Thimbles
Thimbles
for rope
Material
Finish
Certification
E-6180
: mild steel
: electro-galvanized
: a works certificate can be supplied upon request
width
groove
length
length
inside
width
inside
thickness
back
a
mm
8
10
12
14
16
18
20
22
25
30
35
38
b
mm
43
50
55
60
66
77
91
100
115
140
140
140
c
mm
27
30
36
41
43
47
58
67
71
91
91
91
d
mm
16
19
22
24
26
30
35
38
45
55
55
55
e
mm
1
1.5
1.75
2
2.5
3
3
3
3
3
3
4
weight
per
100 pcs
kg
1.1
1.7
3
3.5
8
13
16
24
25
43
45
45
2
3
4
5
Thimbles
tubular type
Material
Finish
Certification
: mild steel
: painted blue
: a works certificate can be supplied upon request
8
9
P-6190
10
diameter
wire
rope
mm
10
12
14
16
18
22
24
26
32
38
44
11
12
13
14
15
16
54
diameter
length
width
inside
thickness
height
a
mm
12
15
17
19
22
25
28
30
35
45
50
b
mm
90
105
115
120
140
180
180
195
215
260
280
c
mm
23
27
27
32
35
45
45
47
60
70
75
d
mm
4
5
5
5
5
6
7
7
7
7
7
e
mm
8
10
10
12
15
16
16
18
22
27
28
weight
per
piece
kg
0.25
0.42
0.5
0.6
0.75
1.4
1.75
2
2.4
3.3
4.06
Thimbles
Round thimbles
ordinary type
Material
Finish
Certification
E-6143
G-6143
: mild steel
: up to and including 13 mm electro-galvanized
over 13 mm hot dipped galvanized
: a works certificate can be supplied upon request
width
groove
width
outside
width
inside
a
mm
10
12
13
14
15
16
18
20
22
25
28
30
35
40
b
mm
30
33
39
41
45
50
56
60
65
80
98
105
120
135
c
mm
18
20
24
28
30
35
40
42
45
52
60
65
75
80
weight
per
100 pcs
kg
1.4
2.6
3.4
4
5
6.5
8
9
10.5
25
43
65
90
95
1
2
3
4
5
Round thimbles
container type
Material
Finish
Certification
: mild steel
: hot dipped galvanized
: a works certificate can be supplied upon request
7
8
G-6144
width
groove
width
outside
width
inside
a
mm
14
14
14
16
16
16
19
19
19
b
mm
80
92
96
80
92
96
80
92
96
c
mm
45
55
60
45
55
60
45
55
60
weight
per
100 pcs
9
10
kg
35
41
44
35
41
44
35
41
44
11
12
13
14
15
16
55
Applications
Wire rope clips are used on wire rope eye-loop connections or complete loops, end-to-end connections where
socketing or splicing is not feasible or when a temporary joint is required.
Range
Van Beest offers a wide range of wire rope clips, specifically standardized models such as EN13411-5,
US Federal Specification wire rope clips and DIN wire rope clips.
Design
The Green Pin wire rope clips are drop forged and have a bridge with grooves to fasten the wire rope properly
in the clip; the DIN wire rope clips have a malleable base, without grooves.
Finish
The finish is either electro-galvanized or hot dipped galvanized, unless otherwise specified.
Certification
Upon request, all wire rope clips can be supplied with a works certificate.
The wire rope clip should be fitted to the wire rope as shown in the figures.
The bridge of the wire rope clip should always be placed on the load bearing part of the rope. The U-bolt of the
clip should be placed on the rope tail, also known as the dead end of the rope.
Turn back enough wire rope length so that the required minimum number of clips can be installed according to
the instructions below.
The first clip must be placed one bridge width from the turned back rope tail or dead end of the rope, according
to figure 1. Tighten the nuts to the specified torque.
56
The second clip must be placed immediately against the thimble but nevertheless in such a position that the
correct tightening of the clip does not damage the outer wires of the wire rope (figure 2). Tighten the nuts firmly
but not yet to the specified torque.
The following clips should be placed on the wire rope between the first and second clip in such a way that they are
separated by at least 1 times the clip-width with a maximum of 3 times the clip-width, according to figure 3.
1
2
Apply light tension on the rope and tighten all nuts evenly, alternating until reaching the specified torque.
During assembly and before the rope is taken into service, the nuts must be tightened once again to the
prescribed torque. After the load is applied for the first time, the torque value must be checked again and corrected if necessary. Periodically re-tightening of the nuts must be done at 10.000 cycles (heavy usage), 20.000
cycles (moderate usage) or 50.000 cycles (light usage). If cycles are unknown, a fixed time period could be used,
e.g. every 3 months, 6 months, annually.
The torque values and the minimum number of clips to be applied, in relation to the rope size, are given in the
following tables.
diameter
wire
rope
inches
1
/8
3
/16
1
/4
5
/16
3
/8
7
/16
1
/2
9
/16
5
/8
3
/4
7
/8
1
1 1/8
1 1/4
1 3/8
1 1/2
1 5/8
1 3/4
2
2 1/4
2 1/2
2 3/4
3
diameter
wire
rope
mm
3-4
5
6-7
8
9-10
11-12
13
14-15
16
18-20
22
24-25
28-30
32-34
36
38-40
41-42
44-46
48-52
56-58
62-65
68-72
75-78
min. no
of clips
required
2
2
2
3
3
3
3
3
3
4
4
5
6
7
7
8
8
8
8
8
9
10
10
length of rope
to turn back
mm
85
95
120
133
165
178
292
305
305
460
480
660
860
1120
1120
1370
1470
1550
1800
1850
2130
2540
2690
torque
value
Nm
6.1
10.2
20.3
40.7
61
88
88
129
129
176
305
305
305
488
488
488
583
800
1017
1017
1017
1017
1627
4
5
6
torque
value
Ft.Lbs
4.5
7.5
15
30
45
65
65
95
95
130
225
225
225
360
360
360
430
590
750
750
750
750
1200
8
9
10
11
12
13
14
15
16
57
diameter
wire
rope
mm
5
6.5
8
10
12
13
14
16
19
22
26
30
34
40
min. no
of clips
required
3
3
4
4
4
4
4
4
5
5
5
6
6
6
torque
value
torque
value
Nm
2
3.5
6
9
20
33
33
49
68
107
147
212
296
363
Ft.Lbs
1.5
2.6
4.4
6.6
14.8
24.3
24.3
36
50
79
108
156
218
268
Table 2, Wire rope clips generally to EN 13411-5 Type A, required number and torque value
The efficiency of a wire rope termination made with wire rope clips will depend on the correct placement on
the ropes and on the care and skill of the fitting and tightening of the clips. With inadequately tightened nuts or
with an insufficient number of wire rope clips the rope end may slide through the clips at a very early stage in
loading.
A number of factors can adversely affect the tightness of the clips on ropes, such as:
- the nut may be tight on the thread, yet not tight against the bridge;
- contamination of the thread by dirt, oil or corrosion products, which may prevent the correct tightening of the
nut.
2
3
Forged wire rope clips provide greater bearing surface and more consistent strength than malleable cast iron
clips.
Suitable use of wire rope clips to EN13411-5 standards include suspending static loads and single use lifting
operations which have been assessed by a competent person taking into account appropriate safety factors.
6
7
It is required that the products are regularly inspected and that the inspection should take place in accordance
with the safety standards given in the country of use. This is required because the products in use may be
affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material
structure.
Inspection should take place at least every six months and even more frequently when the products are used in
severe operating conditions.
8
9
10
11
12
13
14
15
16
58
: Bridge
Standard
Finish
Certification
G-6240
diameter diameter
wire
bow
rope
a
inches
mm
1
/8
3
/16
1
/4
5
/16
3
/8
7
/16
1
/2
9
/16
5
/8
3
/4
7
/8
1
1
1
1
1
1
1
2
2
2
2
3
/8
/4
3
/8
1
/2
5
/8
3
/4
1
/4
/2
3
/4
1
5
6
8
10
11
12
13
14
14
16
19
19
19
22
22
22
25
29
32
32
32
32
38
width
inside
length
thread
weight
per
100 pcs
b
mm
c
mm
d
mm
e
mm
f
mm
g
mm
kg
24
31
34
45
49
60
61
72
74
86
98
108
117
130
140
147
161
174
195
213
227
243
271
12
15
19
22
26
30
30
33
33
38
45
48
51
59
60
66
70
78
86
98
105
112
121
11
13
13
19
19
25
25
32
32
37
41
46
51
54
59
60
67
70
78
81
87
91
98
24
29
37
43
49
58
58
63
64
72
80
88
91
105
108
112
121
134
150
162
168
174
194
21
24
30
33
42
46
48
52
54
57
62
67
73
79
79
85
92
97
113
116
119
127
135
10
13
18
19
25
26
31
31
36
38
40
47
48
56
58
64
67
76
85
100
113
124
136
2
4
8
14
19
31
34
36
45
68
108
113
140
207
234
266
329
441
603
707
806
1000
1440
1
2
3
4
5
6
E-6260
diameter diameter
wire
bow
rope
a
mm
mm
5
4
6.5
5
8
7
10
7
12
10
13
11
14
12
16
12
19
12
22
14
26
18
30
18
34
22
40
24
: Bridge
: malleable steel
U-bolt
: mild steel
: EN 13411-5 Type A
Formerly DIN 1142
: electro-galvanized
: a works certificate can be supplied upon request
length
bow
width
inside
length
thread
b
mm
25
32
41
46
56
64
66
76
83
96
111
127
141
159
c
mm
12
14
18
20
24
29
28
34
37
41
46
54
60
68
d
mm
14
17
20
24
28
29
31
35
36
40
50
55
60
65
8
9
f
mm
13
16
20
20
25
28
30
32
33
34
38
41
45
49
g
mm
13
14
18
21
24
29
28
35
40
44
51
59
67
77
weight
per
100 pcs
kg
2
4
8.2
9.2
21.5
27.5
39.5
43
49
68
117
140
213
268
10
11
12
13
14
15
16
59
E-6220
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
60
diameter diameter
wire
bow
rope
a
mm
mm
3
4
5
5
6
5
8
6
10
8
11
8
13
10
14
10
16
12
19
12
22
14
26
14
30
16
34
16
40
16
: Bridge
: casted
U-bolt
: mild steel
: DIN 741
: electro-galvanized
: a works certificate can be supplied upon request
length
bow
width
inside
length
thread
b
mm
20
24
28
34
42
44
55
57
63
75
85
95
110
120
140
c
mm
9
11
13
16
19
20
24
25
29
32
37
41
48
52
58
d
mm
12
13
15
19
22
22
30
30
33
38
44
45
50
55
60
f
mm
10
11
12
14
18
19
23
23
26
29
33
35
37
42
45
g
mm
10
10
11
15
17
18
21
22
26
30
34
37
43
50
55
weight
per
100 pcs
kg
1.4
1.5
2.1
4.1
6.8
7.2
13
13.5
21
28
40
44
66
85
104
Sleeves
Applications
Sleeves are used for Flemish Eye wire rope slings.
They are available in two types and a large number of sizes.
Range
Van Beest offers a wide range of sleeves, in both aluminium and carbon steel.
Design
Aluminium wire rope sleeves are manufactured according to DIN 3093 A. For safety in fabrication, and application our sleeves are of seamless construction corresponding with the requirements of DIN 3093 A regarding
material composition and mechanical properties.
Prescon carbon steel sleeves are manufactured from carbon steel and feature the Swaging Verification System in
which the colour changes intensity after swaging. This system helps the sling manufacturer to determine whether
or not the sleeve has been pressed.
The sleeves are of seamless construction and fit industry standard dies.
Finish
Aluminium sleeves are selfcoloured.
The smaller dimensions of Prescon sleeves, up to and including 25 mm, are colour coded, larger dimensions
are selfcoloured.
Certification
Upon request, all sleeves can be supplied with a works certificate.
62
Sleeves
Aluminium sleeves
for wire rope
Material
Standard
Finish
A-6550
diameter
wire
rope
mm
1
1.5
2
2.5
3
3.5
4
4.5
5
6
6.5
7
8
9
10
11
12
13
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
: aluminium
: DIN 3093 A
: selfcoloured
diameter
a
mm
1.2
1.7
2.2
2.7
3.3
3.8
4.4
4.9
5.5
6.6
7.2
7.8
8.8
9.9
10.9
12.1
13.2
14.2
15.3
17.5
19.6
21.7
24.3
26.4
28.5
31
33.1
35.2
37.8
39.8
41.9
44
46.2
48.4
50.6
52.8
55
57.2
59.4
61.6
63.8
66
width
b
mm
2.4
3.4
4.4
5.4
6.6
7.6
8.8
9.8
11
13.2
14.4
15.6
17.6
19.8
21.8
24.2
26.4
28.4
30.6
35
39.2
43.4
48.6
52.8
57
62
66.2
70.4
75.6
79.6
83.8
88
92.4
96.8
101.2
105.6
110
114.4
118.8
123.2
127.6
132
thickness
c
mm
0.65
0.75
0.85
1.05
1.25
1.5
1.7
1.9
2.1
2.5
2.7
2.9
3.3
3.7
4.1
4.5
4.9
5.4
5.8
6.7
7.6
8.4
9.2
10
10.9
11.7
12.5
13.4
14.2
15
15.8
16.6
17.5
18.3
19.2
20
20.8
21.6
22.5
23.3
24.2
25
length
d
mm
5
6
7
9
11
13
14
16
18
21
23
25
28
32
35
39
42
46
49
56
63
70
77
84
91
98
105
112
119
126
133
140
147
154
161
168
175
182
189
196
203
210
weight
per
1000 pcs
kg
0.1
0.21
0.24
0.5
0.84
1.32
1.81
2.61
3.57
5.86
7.55
9.53
13.7
19.8
26.4
35.8
45.8
59.7
73.5
111
159
217
292
376
481
603
739
897
1080
1275
1490
1734
2020
2314
2557
3010
3400
3813
4120
4772
5200
5880
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
63
Sleeves
Prescon sleeves
for wire rope
Material
Finish
S-6500
diameter
wire
rope
mm
6
8
10
11
13
14
16
19
22
25
28
32
34-35
37-38
44-45
50-52
56-57
62-64
68-70
75-76
87-89
93-95
100-102
112-114
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
64
length
a
mm
25.4
38.1
38.1
51
51
70
70
81
90
102
122
132
148
159
184
216
243
267
292
305
356
381
406
457
diameter
outside
b
mm
16.7
23
23
31
31
37
37
43.6
51.6
58
64
71
76
83
102
111
128
140
146
152
178
191
206
232
diameter
inside
c
mm
8.3
11.1
11.9
14.3
15.9
17.5
19.1
23.4
26.2
29.4
32.5
36.5
39.7
42.9
49.2
57
64
70
76
83
98
103
111
124
diameter
inside
d
mm
11.9
15.5
16.7
21.4
23
26.2
27.8
32.5
38.9
43.7
49.2
55
60
66.7
79
92
102
114
121
127
148
160
173
194
length
e
mm
7.1
11.1
11.1
15.1
15.1
17.9
17.9
21.8
25.4
28.6
31.8
35.7
39.7
42.9
50
57
64
71
79
86
100
108
114
129
diameter
outside
pressed
mm
12.7
18.5
18.5
24.9
24.9
30.5
30.5
35.8
41.4
47.8
53
58
62
67
77
89
103
113
118
124
145
156
180
187
weight
per
100 pcs
kg
2.15
4.03
5.44
11.3
13.2
19.5
25.9
39.9
62
88
118
154
195
227
367
510
862
1043
1270
1334
2105
2495
3130
4536
Sleeves
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
65
Sockets
Applications
Sockets are used for fastening steel wire rope to a fixed point to which the socket is to be connected. This can
be as an anchoring system for tubes or pipes, anchor wires of dredging material, anchor cables of oil platforms,
towing cables or for fastening cables in construction purposes such as bridges, roof construction etc.
Sockets are the strongest steel wire rope end fitting and if they are assembled in the proper way they can meet
at least the breaking strength of the steel wire rope. In the past melted zinc was poured into the sockets to attach
the steel wire rope; nowadays suitable resins have been developed for this purpose.
Range
Van Beest offers a wide range of sockets, i.e.:
Design
Green Pin open and closed spelter sockets and open wedge sockets are made from cast high tensile steel.
Upon request forged sockets can be supplied.
Gold Nose sockets are galvanized drop forged Special Tailboard Anchor Pendant Sockets ; tested and
approved by major offshore drilling contractors on semi-submersible rigs. With the Gold Nose sockets you save
thousands of dollars in replacement costs and by eliminating costly downtime.
Swage sockets are drop forged from special bar quality carbon steel C-1035 and spheroidized annealed to be
suitable for cold swaging.
Finish
Green Pin open and closed spelter sockets and open wedge sockets are painted green. Galvanized sockets
can be supplied on request.
Certification
Upon request, all sockets can be supplied with a works certificate and a proof load test certificate. All sockets,
with the exception of the swage sockets, are marked with the batch number which refers to the supplied certificate.
Figure 1
- brooming is done after the wire rope has been placed into the socket
- when using resins always exactly follow the instructions given by the manufacturer of the resins
- socketing is only to be carried out by specialists from a certified sling shop
66
The wedge and body act as a vice which grips the wire rope and locks it in place. Green Pin wedge sockets
may be used within the range of wire rope diameters as shown in the table further on in the catalogue.
When using open wedge sockets the following precautions should be taken:
before use always inspect the socket, the wedge and the pin
use only with standard 6-8 strand wire rope
always be sure that socket and wedge have the correct size for the wire rope diameter
the loaded part of the steel wire rope should be mounted in the centre line of the pin
when installing the wire rope, always pre-load the wedge with the wire rope in place
never weld the tail on standard wire rope; the tail should have a length of at least 6 times the wire rope diameter with a minimum of 150 mm, secure the dead end of the rope with a wire rope clip as shown in figure 3
before applying the first load always use a hammer to seat the wedge and rope as deep as possible into the
socket
check the assembly regularly to re-tighten or re-position if necessary
never side-load the wedge socket as it has not been designed for that purpose
load may slip if the connection is not properly installed
the efficiency of a wire rope - wedge socket connection is 80% of the minimum breaking load of the wire but
limited to the minimum breaking load of the socket
only use the original wedge supplied by the manufacturer of the socket and be sure it is suitable for the
diameter of the rope used
never use a wedge from any other supplier than the original socket supplier as the dimensions will not match
Sockets
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
67
Sockets
3) Swage sockets
Figure 4
-
swage sockets are recommended for use on 6 x 19 or 6 x 37 IWRC regular lay ropes
mark the rope to indicate the proper length of rope to be inserted into the socket (figure 5)
insert the rope into the socket and swage the socket with the specified dies (figure 5)
all slings terminated with swage sockets must be proof loaded
always swage under supervision of a specialist from a certified sling shop
It is required that the products are regularly inspected and that the inspection should take place in accordance
with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure.
Inspection should take place at least every six months and even more frequently when the sockets are used in
severe operating conditions.
2
3
4
5
6
7
8
Step 2. Insert rope into socket.
9
10
11
Step 3. Swage the socket.
12
Figure 5
13
14
15
16
68
Sockets
Material
Safety factor
Finish
Certification
:
:
:
:
P-6411
G-6411
number working diameter length
load
wire
limit
rope
a
tons
mm
mm
298
4
11 - 13
140
299
5
14 - 16
162
200
8
18 - 19
194
201
10
20 - 22
224
204
12.6
23 - 26
253
207
16
27 - 30
282
212
20
31 - 36
312
215
25
37 - 39
358
217
32
40 - 42
390
219
40
43 - 48
443
222
50
49 - 54
502
224
64
55 - 60
548
226
80
61 - 68
597
227
90
69 - 75
644
228
100
76 - 80
686
229
120
81 - 86
743
230
140
87 - 93
788
231
160
94 - 102
845
233
200
108 - 115 1000
240
240
120 - 130 1110
width
b
mm
51
67
76
92
104
114
127
136
146
171
193
216
241
273
292
311
330
362
405
515
width
inside
bow
c
mm
30
36
42
47
57
63
70
79
83
93
100
112
140
159
171
184
197
216
235
260
weight
per pce
kg
0.7
1.3
2.1
3.6
5.3
7
9.7
13
17
26
37.5
50
65
94
110
145
168
210
330
550
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
69
Sockets
P-6412
G-6412
Material
Safety factor
Finish
Certification
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
70
198
199
100
104
108
111
115
118
120
125
128
130
132
135
138
140
142
144
146
150
:
:
:
:
tons
4
5
8
10
12.6
16
20
25
32
40
50
64
80
90
100
120
140
160
200
240
mm
11 - 13
14 - 16
18 - 19
20 - 22
23 - 26
27 - 30
31 - 36
37 - 39
40 - 42
43 - 48
49 - 54
55 - 60
61 - 68
69 - 75
76 - 80
81 - 86
87 - 93
94 - 102
108 - 115
120 - 130
length
width
inside
diameter
pin
length
inside
opening
a
mm
142
171
205
235
275
306
338
394
418
468
552
598
654
696
737
788
852
914
1145
1280
b
mm
25
32
38
44
51
57
63
76
76
89
101
113
127
133
146
159
171
191
205
225
c
mm
25
30
35
41
51
57
63
70
76
89
95
108
121
127
133
140
152
178
195
250
d
mm
38
48
58
68
75
85
95
127
127
133
180
196
212
215
219
228
242
254
382
375
e
mm
14
17.5
21
24
28
32
38
41
44
51
57
63
73
79
86
92
99
108
125
138
weight
per pce
kg
1
1.8
3.2
4.6
8
11
16
23
27
41
58
85
118
155
173
230
265
370
525
900
Sockets
P-6413
G-6413
Material
Safety factor
Finish
Certification
:
:
:
:
number
working
load
limit
diameter
wire
rope
tons
1.25
2
3.2
5
6.3
8
12.6
16
20
20
25
32
40
50
64
80
90
100
mm
7-8
9 - 10
11 - 13
14 - 16
18 - 19
20 - 22
24 - 26
27 - 29
30 - 32
34 - 36
37 - 39
40 - 42
43 - 48
49 - 52
54 - 58
60 - 68
72 - 76
81 - 86
0.25
0.5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
length
length
to center
pin
b
mm
110
142
146
176
212
240
274
310
350
400
450
500
550
640
660
835
1000
1100
a
mm
129
165
174
211
252
288
329
375
423
474
527
580
643
737
775
960
1130
1250
width
inside
c
mm
18
20
25
31
38
44
51
57
63
69
76
76
89
101
114
127
146
159
weight
per pce
kg
0.8
1.7
2.1
4
7
10
15
21
31
37
51
64
96
130
180
275
440
510
1
2
3
4
5
6
G-6416
10
diameter
wire
rope
inches
1 1/4 - 1 3/8
1 1/2 - 1 5/8
1 3/4 - 1 7/8
2 - 2 1/8
2 1/4 - 2 3/8
2 1/2 - 2 5/8
2 3/4 - 2 7/8
3 - 3 1/8
3 1/4 - 3 3/8
3 1/2 - 3 5/8
3 3/4 - 3 7/8
4 - 4 1/4
length
width
thickness
bow
width
length
eye
width
eye
a
mm
246
305
356
391
438
457
540
584
626
670
698
803
b
mm
122
152
178
202
221
264
273
295
319
340
356
412
c
mm
38
40
47
53
61
68
74
76
82
92
98
112
d
mm
48
57
66
76
80
96
105
115
121
127
133
152
e
mm
83
104
121
133
146
165
178
194
216
219
235
270
f
mm
76
92
112
121
133
149
163
174
194
202
214
242
thickness weight
per pce
g
mm
97
123
140
158
184
217
222
243
260
270
290
318
11
12
kg
18
22
28
32
44
56
68
100
120
145
190
250
13
14
15
16
71
Sockets
S-6414
diameter diameter diameter diameter length
rope
outside inside
pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
72
length
length
width
eye
weight
per pce
mm
a
mm
b
mm
c
mm
d
mm
e
mm
f
mm
g
mm
h
mm
i
mm
j
mm
kg
6
8
10
11
13
14
16
19
22
25
29
32
35
38
44
51
57
60
63
70
76
13
20
20
25
25
32
32
39
43
50
57
64
71
78
86
100
113
125
125
138
151
7
9
12
12
14
15
17
20
24
27
30
34
37
40
47
54
60
64
67
74
80
17
21
21
25
25
30
30
35
41
51
57
64
64
70
89
95
108
108
108
127
133
38
44
44
51
51
57
57
70
83
95
108
121
133
146
171
203
171
171
171
219
219
121
159
159
198
198
243
243
297
346
397
444
494
540
591
689
798
835
879
879
978
1045
54
81
81
108
108
135
135
162
189
216
243
270
297
324
378
432
486
498
498
537
603
102
135
135
169
169
206
206
254
295
340
381
419
460
502
584
679
705
749
749
838
905
8
10
10
13
13
16
16
19
23
26
30
30
33
37
43
46
65
65
65
76
76
17
21
21
25
25
32
32
38
44
51
57
63
63
76
89
102
114
114
114
146
146
35
41
41
51
51
63
63
76
86
102
114
127
133
146
178
203
222
222
222
241
241
0.25
0.50
0.49
1.04
1.02
2.09
2.04
3.54
5.31
8.07
13.5
16.3
21.3
29.5
42.2
65.8
93.4
106
103
158
181
Sockets
S-6415
diameter diameter diameter diameter diameter thickness
rope
outside
inside
eye
mm
6
8
10
11
13
14
16
19
22
25
29
32
35
38
44
51
57
60
63
70
76
a
mm
13
20
20
25
25
32
32
39
43
50
57
64
71
78
86
100
113
125
125
138
151
b
mm
7
9
12
12
14
15
17
20
24
27
30
34
37
40
47
54
60
64
67
74
80
c
mm
37
43
43
51
51
63
63
76
89
102
114
127
133
140
171
197
219
219
219
235
235
d
mm
19
22
22
27
27
32
32
37
43
52
59
65
65
71
91
97
110
110
110
129
135
e
mm
13
17
17
22
22
29
29
33
38
44
51
57
57
63
76
83
102
102
102
137
137
length
length
f
mm
54
81
81
108
108
135
135
162
189
216
243
270
297
324
378
432
486
498
498
537
603
g
mm
111
140
140
176
176
222
222
264
308
349
387
438
479
518
610
698
756
791
791
892
959
length
h
mm
89
114
114
146
146
184
184
219
257
292
324
365
400
432
508
584
632
664
667
752
816
weight
per pce
kg
0.15
0.36
0.35
0.66
0.63
1.26
1.25
2.27
3.40
5.08
7.17
10.4
14.1
17.7
23.6
40.8
55.3
67.6
64.4
99.3
114
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
73
Turnbuckles
Applications
Turnbuckles are normally used for rigging or tensioning of wires, ropes, rods etc. Turnbuckles are designed for straight or
in-line rigging, tensioning or lashing only.
Range
Van Beest offers a wide range of turnbuckles, i.e.:
Load rated Green Pin turnbuckles;
Open body rigging screws generally to DIN1480;
Rigging screws with welding ends;
Closed body rigging screws;
Special turnbuckles for lashing (hamburgers).
Design
Green Pin turnbuckles are manufactured to ASTM F1145-92, formerly U.S. Fed. Spec.FF-T-791, and have a
safety factor of 5 to 1. The Green Pin turnbuckles are drop forged.
Turnbuckles can be equipped with the following endfittings: eye/eye, hook/hook, hook/eye, jaw/jaw and jaw/
eye. All parts are interchangeable, locking nuts are supplied with all sizes.
The forged jaw ends are fitted with bolts and nuts on sizes up to and including 5/8, sizes up to and
including 2 are equipped with pins and cotters.
Rigging screws generally to DIN 1480 are available with welding ends and in hook/eye, eye/eye, hook/hook
and jaw/jaw combinations.
Closed body rigging screws are available in jaw/jaw, jaw/eye and eye/eye combinations.
Finish
Load rated Green Pin turnbuckles and closed body rigging screws are hot dipped galvanized. Rigging screws according
to DIN 1480 are electro-galvanized whereas lashing turnbuckles are selfcoloured or can be painted upon request.
Certification
Upon request, Green Pina turnbuckles can be supplied with a works certificate and a proof load test certificate.
74
the
the
the
the
threads of the body and the endfittings are of the same type;
threads of the body and the endfittings are undamaged;
body and endfittings are not distorted or unduly worn;
body and endfittings are free from nicks, gouges and cracks.
Furthermore, it must be ensured that the endfittings are correctly screwed into the body. Always use the locking
nuts supplied to prevent the turnbuckles from unscrewing.
Never replace an endfitting, other than the one designed for the purpose, as it may not be suitable for the loads
imposed.
Turnbuckles
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
75
Turnbuckles
G-6313
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
76
diameter
thread
take
up
a
inches
3
/8
1
/2
1
/2
1
/2
5
/8
5
/8
5
/8
3
/4
3
/4
3
/4
3
/4
7
/8
7
/8
1
1
1
1
1 1/4
1 1/4
1 1/4
1 1/2
1 1/2
1 1/2
1 3/4
1 3/4
2
2 1/2
2 3/4
inches
6
6
9
12
6
9
12
6
9
12
18
12
18
6
12
18
24
12
18
24
12
18
24
18
24
24
24
24
length
length opening
closed
open
jaw
position position
b
c
d
mm
mm
mm
302
416
13
338
452
16
414
585
16
490
719
16
394
508
18
470
641
18
546
775
18
432
546
23
508
679
23
584
813
23
737
1080
23
625
854
27
778
1121
27
524
638
30
676
905
30
829
1172
30
980
1437
30
760
989
44
912
1255
44
1064
1521
44
823
1052
52
975
1318
52
1128
1585
52
1060
1403
59
1213
1670
59
1315
1772
64
1486
1943
75
1562
2019
89
Turnbuckles
G-6311
diameter
thread
take
up
a
inches
inches
/8
1
/2
1
/2
1
/2
5
/8
5
/8
5
/8
3
/4
3
/4
3
/4
3
/4
7
/8
7
/8
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
/4
/4
1
/4
1
/2
1
/2
1
/2
3
/4
3
/4
1
1
3
/2
/4
6
6
9
12
6
9
12
6
9
12
18
12
18
6
12
18
24
12
18
24
12
18
24
18
24
24
24
24
length
closed
position
b
mm
302
338
414
490
394
470
546
432
508
584
737
625
778
524
676
829
980
760
912
1064
823
975
1128
1060
1213
1315
1486
1562
length
open
position
c
mm
416
452
585
719
508
641
775
546
679
813
1080
854
1121
638
905
1172
1437
989
1255
1521
1052
1318
1585
1403
1670
1772
1943
2019
diameter
width
inside
length
inside
working
load
limit
weight
per pce
f
mm
length
closed
position
g
mm
d
mm
e
mm
9
12
12
12
14
14
14
17
17
17
17
20
20
22
22
22
22
29
29
29
32
32
32
38
38
45
51
57
13
18
18
18
21
21
21
25
25
25
25
31
31
36
36
36
36
45
45
45
54
54
54
60
60
69
79
83
tons
kg
28
36
36
36
43
43
43
53
53
53
53
59
59
74
74
74
74
88
88
88
105
105
105
119
119
146
165
178
65
80
80
80
98
98
98
113
113
113
113
118
118
155
155
155
155
197
197
197
215
215
215
254
254
308
344
381
0.54
1
1
1
1.59
1.59
1.59
2.36
2.36
2.36
2.36
3.27
3.27
4.54
4.54
4.54
4.54
6.9
6.9
6.9
9.71
9.71
9.71
12.7
12.7
16.78
27.22
34.02
0.32
0.66
0.76
0.91
1.07
1.31
1.71
1.65
1.95
2.30
2.85
3.33
4.24
3.87
5.09
6
7.52
8.12
10.4
12.1
12.7
15.1
17.1
23.1
26.3
40.7
64
88
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
77
Turnbuckles
G-6312
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
78
diameter
thread
take
up
a
inches
3
/8
1
/2
1
/2
1
/2
5
/8
5
/8
5
/8
3
/4
3
/4
3
/4
3
/4
7
/8
7
/8
1
1
1
1
1 1/4
1 1/4
1 1/4
1 1/2
1 1/2
1 1/2
inches
6
6
9
12
6
9
12
6
9
12
18
12
18
6
12
18
24
12
18
24
12
18
24
length
closed
position
b
mm
302
338
414
490
394
470
546
432
508
584
737
625
778
524
676
829
980
760
912
1064
823
975
1128
length
closed
position
g
mm
58
72
72
72
90
90
90
98
98
98
98
126
126
144
144
144
144
175
175
175
212
212
212
working
load
limit
weight
per pce
tons
0.45
0.68
0.68
0.68
1.02
1.02
1.02
1.36
1.36
1.36
1.36
1.81
1.81
2.27
2.27
2.27
2.27
2.27
2.27
2.27
3.4
3.4
3.4
kg
0.32
0.66
0.76
0.91
1.07
1.31
1.71
1.65
1.95
2.3
2.85
3.33
4.24
3.87
5.09
6
7.52
8.12
10.4
12.1
12.7
15.1
17.1
Turnbuckles
Finish
Certification
diameter
take
length
length
opening
thread
up
closed
open
jaw
position position
G-6315
inside
length
length
pin
eye
eye
width
length
closed
load
jaw
jaw
jaw
jaw
eye
eye
position
limit
eye
working weight
per pce
inches
inches
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
tons
kg
6
6
9
12
6
9
12
6
9
12
18
12
18
6
12
18
24
12
18
24
12
18
24
18
24
24
24
24
302
338
414
490
394
470
546
432
508
584
737
625
778
524
676
829
980
760
912
1064
823
975
1128
1060
1213
1315
1486
1562
416
452
585
719
508
641
775
546
679
813
1080
854
1121
638
905
1172
1437
989
1255
1521
1052
1318
1585
1403
1670
1772
1943
2019
13
16
16
16
18
18
18
23
23
23
23
27
27
30
30
30
30
44
44
44
52
52
52
59
59
64
75
89
22
26
26
26
33
33
33
38
38
38
38
44
44
52
52
52
52
73
73
73
70
70
70
85
85
93
114
110
8
9.5
9.5
9.5
13
13
13
15.5
15.5
15.5
15.5
19
19
22
22
22
22
29
29
29
35
35
35
41
41
51
57
70
8
10
10
10
13
13
13
16
16
16
16
18
18
20
20
20
20
25
25
25
27
27
27
33
33
39
38
42
21
25
25
25
33
33
33
41
41
41
41
48
48
54
54
54
54
67
67
67
80
80
80
90
90
108
143
156
9
12
12
12
14
14
14
17
17
17
17
20
20
22
22
22
22
29
29
29
32
32
32
38
38
45
51
57
13
18
18
18
21
21
21
25
25
25
25
31
31
36
36
36
36
45
45
45
54
54
54
60
60
69
79
83
28
36
36
36
43
43
43
53
53
53
53
59
59
74
74
74
74
88
88
88
105
105
105
119
119
146
165
178
65
80
80
80
98
98
98
113
113
113
113
118
118
155
155
155
155
197
197
197
215
215
215
254
254
308
344
381
0.54
1
1
1
1.59
1.59
1.59
2.36
2.36
2.36
2.36
3.27
3.27
4.54
4.54
4.54
4.54
6.9
6.9
6.9
9.71
9.71
9.71
12.7
12.7
16.78
27.22
34.02
0.34
0.69
0.78
0.93
1.07
1.39
1.71
1.76
1.95
2.43
2.98
3.52
4.19
4.05
5.08
6.03
7.39
8.80
11
12.9
13.1
14.7
17.8
22.3
27.5
42.9
68
91
/8
1
/2
1
/2
1
/2
5
/8
5
/8
5
/8
3
/4
3
/4
3
/4
3
/4
7
/8
7
/8
1
1
1
1
1 1/4
1 1/4
1 1/4
1 1/2
1 1/2
1 1/2
1 3/4
1 3/4
2
2 1/2
2 3/4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
79
Turnbuckles
Finish
Certification
G-6314
diameter
thread
take
up
a
inches
inches
/8
1
/2
1
/2
1
/2
5
/8
5
/8
5
/8
3
/4
3
/4
3
/4
3
/4
7
/8
7
/8
1
1
1
1
1 1/4
1 1/4
1 1/4
1 1/2
1 1/2
1 1/2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
80
6
6
9
12
6
9
12
6
9
12
18
12
18
6
12
18
24
12
18
24
12
18
24
length
length thickness thickness opening diameter
closed
open
hook
hook
hook
eye
position position
b
c
d
e
f
g
mm
mm
mm
mm
mm
mm
302
338
414
490
394
470
546
432
508
584
737
625
778
524
676
829
980
760
912
1064
823
975
1128
416
452
585
719
508
641
775
546
679
813
1080
854
1121
638
905
1172
1437
989
1255
1521
1052
1318
1585
10
13
13
13
16
16
16
20
20
20
20
23
23
25
25
25
25
28
28
28
33
33
33
15
19
19
19
23
23
23
27
27
27
27
30
30
35
35
35
35
37
37
37
44
44
44
14
17
17
17
22
22
22
25
25
25
25
29
29
32
32
32
32
39
39
39
47
47
47
9
12
12
12
14
14
14
17
17
17
17
20
20
22
22
22
22
29
29
29
32
32
32
inside
width
eye
h
mm
inside
length
eye
i
mm
13
18
18
18
21
21
21
25
25
25
25
31
31
36
36
36
36
45
45
45
54
54
54
28
36
36
36
43
43
43
53
53
53
53
59
59
74
74
74
74
88
88
88
105
105
105
65
80
80
80
98
98
98
113
113
113
113
118
118
155
155
155
155
197
197
197
215
215
215
0.45
0.68
0.68
0.68
1.02
1.02
1.02
1.36
1.36
1.36
1.36
1.81
1.81
2.27
2.27
2.27
2.27
2.27
2.27
2.27
3.4
3.4
3.4
0.32
0.66
0.76
0.91
1.07
1.31
1.71
1.65
1.95
2.3
2.85
3.33
4.24
3.87
5.09
6
7.52
8.12
10.4
12.1
12.7
15.1
17.1
Turnbuckles
E-6351
diameter length
length
thread
closed
open
position position
a
b
c
mm
mm
mm
6
160
246
8
168
248
10
210
300
12
222
305
14
244
334
16
300
416
20
334
466
22
372
527
24
410
587
30
440
605
33
490
690
36
554
740
length
length
length
body endfitting thread
d
mm
110
110
125
125
140
170
200
220
255
255
295
295
e
mm
80
84
105
110
123
143
165
185
208
220
245
277
f
mm
55
57
68
70
75
88
105
118
135
135
148
158
1
2
3
4
7
8
E-6352
diameter length
length
thread
closed
open
position position
a
b
c
mm
mm
mm
6
184
270
8
200
280
10
234
323
12
260
343
14
278
368
16
322
438
20
382
514
22
456
601
24
496
673
30
550
715
33
600
799
36
640
825
length
length
length
body endfitting thread
d
mm
110
110
125
125
140
170
200
220
255
255
295
295
e
mm
92
100
117
130
139
161
191
228
248
275
300
320
f
mm
55
57
68
70
75
88
105
118
135
135
148
158
h
mm
15
15
11
13
15
17
21
28
33
35
40
45
kg
0.11
0.2
0.28
0.43
0.61
1
1.6
2.2
2.8
4.1
6
8.3
9
10
11
12
13
14
15
16
81
Turnbuckles
E-6354
diameter length
length
thread closed
open
position position
a
b
c
mm
mm
mm
6
8
10
12
14
16
20
22
24
30
33
36
1
2
172
184
222
241
261
311
358
414
453
495
545
597
258
264
311
324
351
427
490
559
630
660
744
782
length
length
length length
body endfitting endfitting thread
d
mm
e
mm
110
110
125
125
140
170
200
220
255
255
295
295
77
85
106
117
124
144
170
200
215
240
260
275
f
mm
80
84
105
111
122
150
167
186
205
220
245
277
g
mm
55
57
68
70
75
88
105
118
135
135
148
158
8
10.5
13
16
18
20
21
24
26
34
38
46
15
15
11
13
15
17
21
28
33
35
40
45
20
22
31
35
40
47
52
60
65
71
88
94
9
10
14
16
18
22
24
27
27
31
36
38
0.11
0.2
0.28
0.43
0.61
1
1.6
2.2
2.8
4.1
6
8.4
weight
per pce
3
4
5
Rigging screws Jaw - Jaw
8
9
diameter
thread
10
E-6353
a
mm
6
8
10
12
14
16
20
22
24
30
11
12
13
14
15
16
82
length
closed
position
b
mm
191
194
236
266
316
374
438
466
514
544
length
open
position
c
mm
277
274
325
349
406
490
570
611
691
709
length
body
opening
jaw
length
inside
d
mm
110
110
125
125
140
170
200
220
255
255
e
mm
7.5
8.5
11
13
16
18
20
22
24
30
f
mm
12
12
16
20
30
38
42
44
46
50
g
mm
M 6
M 6
M 8
M 10
M 12
M 12
M 16
M 18
M 20
M 24
h
mm
5
6
8
10
12
12
16
18
20
22
i
mm
13
14
18
24
28
32
38
40
42
46
kg
0.16
0.21
0.38
0.66
1.15
1.45
2.61
3.24
4.35
6.48
Turnbuckles
E-6355
diameter
thread
a
mm
6
8
10
12
14
16
20
22
24
30
length
closed
position
b
mm
240
240
300
300
330
400
440
440
520
520
length
open
position
c
mm
326
320
389
383
420
516
572
585
697
685
length
body
d
mm
110
110
125
125
140
170
200
220
255
255
length
body
inside
e
mm
86
80
89
83
90
116
132
145
177
165
length
stub-ends
length
thread
f
mm
120
120
150
150
165
200
220
220
260
260
g
mm
65
65
75
75
85
100
120
130
150
160
weight
per
100 pcs
kg
9.3
14
29
40
66
89
160
227
282
423
1
2
3
4
5
Jaw - Jaw
Material
Safety factor
Finish
Note
:
:
:
:
mild steel
MBL equals 5 x WLL
hot dipped galvanized
end fittings of 6 and 8 mm rigging screws are electro-galvanized
7
8
G-6343
diameter length
thread
body
a
mm
6
8
10
12
16
20
22
24
33
39
45
48
b
mm
100
108
125
195
230
270
295
325
370
400
400
400
length
length diameter length
closed
open
pin
inside
position position
c
d
e
f
mm
mm
mm
mm
175
255
5
19
199
282
6
25
222
320
8
26
320
479
10
32
388
572
12
39
454
672
16
46
490
730
20
55
558
819
22
63
681
977
30
85
710
1017
33
86
760
1050
39
105
820
1110
45
120
opening
jaw
width
jaw
g
mm
7
9
10.5
13
18
20
25
30
38
45
50
58
h
mm
20
24
28
34
42
51
55
70
82
85
100
118
9
10
11
12
13
14
15
16
83
Turnbuckles
G-6340
Material
Safety factor
Finish
Note
:
:
:
:
diameter
thread
length
body
a
mm
6
8
10
12
16
20
22
24
33
39
45
48
b
mm
100
108
125
195
230
270
295
325
370
400
400
400
1
2
mild steel
MBL equals 5 x WLL
hot dipped galvanized
end fittings of 6 and 8 mm rigging screws are electro-galvanized
length
length diameter
closed
open
position position
c
d
e
mm
mm
mm
165
245
5.5
178
261
6
210
308
8.5
325
484
11
380
564
12
455
673
16
495
736
16
545
806
19
665
961
29
725
1032
34
760
1050
30
820
1110
35
length
eye
inside
f
mm
11
12
13
30
40
50
50
56
70
80
90
100
width
eye
inside
g
mm
11
12
13
15
20
24
24
28
35
40
45
45
working weight
load
per pce
limit
tons
0.2
0.32
0.5
0.7
1.2
1.5
2.2
3.2
4.8
6
8.5
11
kg
0.13
0.2
0.6
0.8
1.4
2.4
3
4
9
11.5
20.8
24
3
4
5
Closed body rigging screws
Eye - Jaw
Material
Safety factor
Finish
Note
:
:
:
:
mild steel
MBL equals 5 x WLL
hot dipped galvanized
end fittings of 6 and 8 mm rigging screws are electro-galvanized
8
9
diameter length
thread
body
10
G-6345
a
mm
6
8
10
12
16
20
22
24
33
39
45
48
11
12
13
14
15
16
84
b
mm
100
108
125
195
230
270
295
325
370
400
400
400
width
jaw
h
mm
20
24
28
34
42
51
55
70
82
85
100
118
diameter length
jaw
eye
eye
inside
i
j
mm
mm
13
11
14
12
19
13
22
30
28
40
33
50
38
50
46
56
60
70
76
80
86
90
92
100
Turnbuckles
Turnbuckles (hamburgers)
for deck lashing
Material
Finish
S-6330
: mild steel
: selfcoloured
diameter
thread
length
thread
diameter
bow
length
bow
a
mm
24
24
27
27
30
30
36
36
b
mm
400
500
400
500
400
500
400
500
c
mm
16
16
18
18
20
20
20
20
d
mm
210
260
210
260
210
260
210
260
minimum
breaking
load
weight
per pce
tons
13
13
18
18
20
20
21
21
kg
3
3.8
4.4
5.5
5
6.3
7
8.8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
85
Links
Applications
Connecting links are used for Grade 80 chain slings.
Master links and master link assemblies are used for 1, 2, 3 and 4-leg slings.
Range
Van Beest supplies a wide range of Green Pin connecting links for chain with diameter 7-26 mm, as well as a
wide range of Green Pin master links and Green Pin master link assemblies.
Design
Master links can be supplied with or without a flat part for easy connection of the master link in the sling; the
connecting links are supplied unassembled but are designed for easy and quick assembly. All master links and
connecting links are suitable for lifting purposes, with a safety factor of four times the working load limit. Each
master link and connecting link carries the manufacturers symbol, the steel grade and the CE conformity code
stamped in the body.
Finish
All connecting links and master links are painted yellow.
Certification
Test certificates can be supplied upon request.
It is required that the products are regularly inspected and that the inspection should take place minimally in
accordance with the safety standards given in the country of use. This is required because the products in use
may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the
material structure.
Inspection should take place at least every six months and even more frequently when the links are used in
severe operating conditions.
86
Links
Material
Safety factor
Standard
Finish
Certification
:
:
:
:
:
P-6860
working
for
diameter width
load
chain
outside
limit
diameter
a
b
tons
mm
mm
mm
2
7-8
9
54
3.2
10
10
66
5.1
13
14
83
8
16
17
103
12.7
18-20
21
120
15.5
22
26
143
21.7
26
30
160
width
inside
length
inside
length
inside
c
mm
14
18
21
25
33
40
44
d
mm
22
25
34
42
53
58
62
e
mm
55
64
85
105
129
140
153
diameter weight
eye
per pce
f
mm
13
19
24
28
34
37
43
kg
0.11
0.35
0.6
1.36
1.81
2.92
4.54
1
2
Finish
Certification
5
6
P-6820
working
load
limit
tons
1.6
2
3.2
5
8
11.2
14
18
25
32
40
50
63
80
diameter
chain
1 leg
mm
6
8
10
13
16
18
20
22
26-28
32
36
40
45
-
diameter
chain
2 legs
mm
6
6
8
10
13
16
18
20
22
26-28
32
36
40
45
diameter
a
mm
13
16
18
22
26
32
36
40
45
51
57
65
72
80
length
inside
b
mm
110
110
135
160
180
200
260
300
340
350
400
430
460
500
width
inside
c
mm
60
60
75
90
100
110
140
160
180
190
200
220
250
270
weight
per pce
kg
0.35
0.53
0.8
1.5
2.3
3.9
6.35
9
12.8
17.2
24.2
32
46
62
7
8
9
10
11
12
13
14
15
16
87
Links
Finish
Certification
P-6840
working diameter diameter
load
chain
limit
3-4 legs
a
tons
mm
mm
2.4
6
18
4.3
8
22
6.7
10
26
10
13
32
17
16
36
21.2
18
45
26.5
20
51
32
22
51
40
26
57
50
28
63
63
32
72
1
2
length
inside
width
inside
diameter
length
inside
width
inside
weight
per pce
b
mm
135
160
180
200
260
340
350
350
400
430
460
c
mm
75
90
100
110
140
180
190
190
200
220
250
d
mm
13
16
18
22
26
32
32
36
40
45
51
e
mm
54
70
85
115
140
150
150
170
170
180
200
f
mm
25
34
40
50
65
70
70
75
80
90
100
kg
1.16
2.22
3.36
6.02
9.99
18.9
23.3
25.8
35.2
47
67.6
3
Green Pin master links
Material
Safety factor
Standard
Finish
Certification
Note
P-6830
8
9
10
11
12
13
14
15
16
88
working
load
limit
diameter
chain
1 leg
tons
1.2
1.6
2
3.15
5.3
8
10
12.5
15
21.2
25
32
40
50
63
80
100
mm
6
7
8
10
13
16
(18)
20
22
26
(28)
32
36
40
45
(50)
(56)
diameter
chain
2 legs
mm
6
7
8
10
13
16
18-20
22
26
(28)
32
36
40
45
diameter
a
mm
12
14
16
20
23
26
30
33
36
40
45
52
57
65
72
80
90
length
inside
width
inside
weight
per pce
b
mm
120
120
120
160
160
180
230
230
260
300
340
350
400
430
460
500
500
c
mm
70
70
70
90
90
100
130
130
140
160
180
190
200
220
250
270
270
kg
0.36
0.43
0.58
1.2
1.65
2.35
4
4.8
6.35
9
13
17
25
32
46
62
80
Links
length
inside
width
inside
diameter
length
inside
width
inside
weight
per pce
b
mm
120
120
160
160
180
230
230
300
300
400
400
450
460
500
500
500
c
mm
70
70
90
90
100
130
130
170
170
220
220
250
250
270
270
270
d
mm
12
14
14
18
20
26
28
30
33
36
42
47
52
65
72
80
e
mm
100
100
100
120
120
180
180
230
230
230
300
300
400
450
460
500
f
mm
60
60
60
70
70
100
100
130
130
130
170
170
220
250
250
270
kg
1
1.4
2
3.2
4.3
9.6
11.4
17.6
21.8
30.8
42.2
61
86.6
136
172
225
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
89
Swivels
Applications
Thrust bearing swivels are used to prevent wire rope or chain from transferring their normal twisting motion to
the item being lifted. Our swivels can be supplied with various types of end-fittings.
Green Pin swivels are not designed to rotate under load, but are intended as positioning devices only.
For rotation under load, thrustbearing swivels should be used.
Range
Van Beest offers two types of swivels:
Green Pin swivels, ranging from Working Load Limit 0.39 up to 20.5 tons, with eye-eye or jaw-eye terminals.
A full range of thrust-bearing swivels, Working Load Limit 3 tons up to 15 tons, with all possible types of combinations of terminals, where by the upper terminal is either an eye or a jaw (for semi-permanent fixation).
Each thrust bearing swivel is individually proof tested. Large sizes of thrust bearing swivels up to 750 tons can
be manufactured on request.
Design
The Green Pin swivels are dropforged whereas the thrustbearing swivels are machined from carbon steel.
The range of thrustbearing swivels we supply are fitted with grease nipples to ensure long life and ease of
operation. Greasing depends on the frequency and intensity of use.
Each swivel carries the WLL marking, the manufacturers symbol and the CE conformity code.
Finish
Green Pin eye-eye and jaw-eye swivels are hot dipped galvanized.
The thrust bearing swivels are painted blue.
Certification
Test certificates can be supplied upon request.
The WLL should be applied in a straight pull and overloads are prohibited. Side loading is not allowed since the
swivels are not designed for this purpose.
Never replace a swivel pin or nut with a bolt other than the one designed for the purpose, as it may not be
suitable for the load imposed.
It is required that the products are regularly inspected and that the inspection should take place in accordance
with the safety standards given in the country of use. This is required because the products in use may be
affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material
structure.
Inspection should take place at least every six months and even more frequently when the swivels are used in
severe operating conditions.
90
Swivels
G-7713
Material
Safety factor
Standard
Finish
Certification
:
:
:
:
:
width
outside
length
inside
width
inside
length
inside
length
c
mm
32
41
51
64
76
89
102
114
143
178
d
mm
17
21
24
33
40
44
52
59
68
106
e
mm
19
25
32
38
44
51
57
64
80
102
f
mm
27
32
38
51
60
67
78
89
94
106
g
mm
75
90
110
138
167
183
213
245
291
435
weight
per pce
kg
0.1
0.18
0.32
0.6
1.13
1.82
2.83
4.06
7.43
20.8
1
2
3
4
5
Jaw - Eye
G-7723
Material
Safety factor
Standard
Finish
Certification
:
:
:
:
:
7
8
width
outside
length
inside
width
inside
length
inside
length
width
inside
c
mm
32
41
51
64
76
89
102
114
143
178
d
mm
17
21
24
33
40
44
52
59
68
106
e
mm
19
25
32
38
44
51
57
64
80
102
f
mm
22
22
27
33
38
44
52
71
71
112
g
mm
67
75
92
114
135
154
178
217
248
375
h
mm
12
13
16
19
24
28
30
44
52
73
diameter weight
pin
per pce
i
mm
6
8
10
13
16
19
22
28
35
57
9
10
kg
0.11
0.17
0.32
0.65
1.12
1.76
2.66
4.46
7.14
24.8
11
12
13
14
15
16
91
Swivels
P-7710
Material
Safety factor
Finish
Certification
working
load
limit
:
:
:
:
carbon steel
MBL equals 5 x WLL
painted blue
test certificates can be supplied upon request
length
length
diameter
a
mm
210
251
330
378
448
b
mm
160
193
260
282
346
c
mm
75
95
121
121
140
tons
3
5
8.5
10
15
width
jaw
outside
d
mm
41
57
70
75
89
width
jaw
inside
e
mm
20
25
35
44
44
diameter
hole
weight
per pce
f
mm
20
23
29
38
38
kg
4.5
8.2
16.3
18.6
29
1
2
3
4
5
Thrust bearing swivels
Jaw - Eye
Material
Safety factor
Finish
Certification
:
:
:
:
carbon steel
MBL equals 5 x WLL
painted blue
test certificates can be supplied upon request
8
9
P-7720
10
working
load
limit
tons
3
5
8.5
10
15
11
12
13
14
15
16
92
length
length
a
mm
203
244
321
368
438
b
mm
153
183
248
272
333
thickness diameter
c
mm
20
25
32
44
51
d
mm
75
95
121
121
140
width
jaw
outside
e
mm
41
57
70
75
89
width
jaw
inside
f
mm
20
25
35
44
44
diameter diameter
hole
hole
g
mm
20
23
29
38
38
h
mm
23
32
35
41
51
weight
per pce
kg
4.1
7.7
15.9
18.6
29.5
Swivels
P-7730
Material
Safety factor
Finish
Certification
working
load
limit
tons
3
5
8.5
10
15
:
:
:
:
carbon steel
MBL equals 5 x WLL
painted blue
test certificates can be supplied upon request
length
length
a
mm
203
244
318
362
429
b
mm
153
183
248
272
333
thickness diameter
c
mm
20
25
32
44
51
d
mm
75
95
121
121
140
width
jaw
outside
e
mm
41
57
70
75
89
width
jaw
inside
f
mm
20
25
35
44
44
diameter diameter
hole
hole
g
mm
20
23
29
38
38
h
mm
23
32
35
41
51
weight
per pce
kg
4.1
7.7
15.9
18.6
29.5
1
2
3
4
5
Thrust bearing swivels
Eye - Eye
Material
Safety factor
Finish
Certification
:
:
:
:
carbon steel
MBL equals 5 x WLL
painted blue
test certificates can be supplied upon request
7
8
P-7740
working
load
limit
tons
3
5
8.5
10
15
length
length
thickness
diameter
diameter
hole
a
mm
200
238
308
352
419
b
mm
150
174
232
256
311
c
mm
20
25
32
44
51
d
mm
75
95
121
121
140
e
mm
23
32
35
41
51
weight
per pce
10
kg
3.6
6.8
15
17.7
28.1
11
12
13
14
15
16
93
Swivels
Material
Safety factor
Finish
Certification
working
load
limit
P-7750
:
:
:
:
carbon steel
MBL equals 5 x WLL
painted blue
test certificates can be supplied upon request
length
diameter
a
mm
273
337
457
479
578
b
mm
75
95
121
121
140
tons
3
5
8.5
10
15
width
jaw
outside
c
mm
41
57
70
75
89
width
jaw
inside
d
mm
20
25
35
44
44
diameter
hole
weight
per pce
e
mm
20
23
29
38
38
kg
5
9.5
20.8
24
36.3
1
2
3
4
5
6
Material
Safety factor
Finish
Certification
:
:
:
:
carbon steel
MBL equals 5 x WLL
painted blue
test certificates can be supplied upon request
9
10
P-7760
11
working
load
limit
tons
3
5
8.5
10
15
12
13
14
15
16
94
length
thickness
diameter
diameter
hole
weight
per pce
a
mm
270
330
448
470
568
b
mm
20
25
32
44
51
c
mm
75
95
121
121
140
d
mm
23
32
35
41
51
kg
4.5
9.1
20.4
23.6
35.4
Swivels
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
95
Hooks
Applications
Hooks are used in lifting systems as a connection between the load to be lifted and the wire rope or chain
slings.
Range
Van Beest offers a wide range of hooks, from drop forged carbon steel hooks to drop forged alloy steel swivel
hooks, which arequenched and tempered.
Upon special request other types of hooks can be offered.
Design
There are different types of hooks with their specific designs to suit a particular purpose. Eye hooks and swivel
hooks are designed for wire rope or chain. Pipe line hooks are specially designed for handling tubes easily.
Most types of hooks are supplied with a safety latch.
All types carry the following markings:
Finish
The grade 8 hooks are painted red, grade 4 hooks are painted green.
Upon request hooks can be supplied galvanized or selfcoloured.
Certification
All hooks can be supplied with test certificates upon request.
It is required that the products are regularly inspected and that the inspection should take place in accordance
with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure.
Inspection should take place at least every six months and even more frequently when the hooks are used in
severe operating conditions.
96
Hooks
Material
Safety factor
Standard
Finish
Certification
:
:
:
:
P-6714C
working
load
limit
tons
0.8
1
1.6
2
3.2
5
7.5
10
15
length
a
mm
82
93
103
120
147
187
230
256
318
diameter width
width thickness
eye
opening opening
inside
b
c
d
e
mm
mm
mm
mm
19
24
20
15
25
26
22
18
28
27
23
20
32
32
27
23
40
41
35
29
51
51
43
37
64
61
53
46
72
65
58
58
90
85
78
63
width
f
mm
20
22
27
30
38
46
58
66
77
diameter weight
eye
per pce
outside
g
mm
kg
38
0.27
45
0.4
52
0.55
60
0.83
74
1.9
97
3.5
122
6.9
136
10.5
168
17.5
1
2
3
4
5
6
Material
Safety factor
Standard
Finish
Certification
:
:
:
:
8
9
P-6714A
working
load
limit
tons
1.25
1.6
2.5
3.2
5.4
8
11.5
16
22
length
a
mm
82
93
103
120
147
187
230
256
318
diameter width
width thickness
eye
opening opening
inside
b
c
d
e
mm
mm
mm
mm
19
24
20
15
25
26
22
18
28
27
23
20
32
32
27
23
40
41
35
29
51
51
43
37
64
61
53
46
72
65
58
58
90
85
78
63
width
f
mm
20
22
27
30
38
46
58
66
77
diameter weight
eye
per pce
outside
g
mm
kg
38
0.27
45
0.4
52
0.55
60
0.83
74
1.9
97
3.5
122
6.9
136
10.5
168
17.5
10
11
12
13
14
15
16
97
Hooks
P-6703C
working
load
limit
tons
0.8
1
1.6
2
3.2
5
7.5
10
15
20
length
length
inside
a
mm
116
145
165
175
214
264
308
344
427
505
b
mm
28
36
49
45
55
70
74
86
114
125
width
width diameter
opening opening
c
mm
24
26
27
32
41
51
61
65
85
90
d
mm
20
22
23
27
35
43
53
58
78
82
e
mm
11
14
17
17
21
26
29
35
40
48
width
diameter
width
f
mm
20
22
27
30
38
46
58
66
77
90
g
mm
52
67
81
81
106
129
148
165
200
235
h
mm
30
36
42
42
64
77
92
105
130
146
width
diameter
width
f
mm
20
22
27
30
38
46
58
66
77
90
g
mm
52
67
81
81
106
129
148
165
200
235
h
mm
30
36
42
42
64
77
92
105
130
146
thickness weight
per pce
i
mm
15
18
20
23
29
37
46
58
63
82
kg
0.45
0.9
1.3
1.6
3.8
6.9
10.6
16
27
60
2
3
4
5
6
Material
Safety factor
Finish
Certification
P-6703A
9
10
working
load
limit
11
tons
1.25
1.6
2.5
3.2
5.4
8
11.5
16
22
30
12
13
14
15
16
98
length
length
inside
a
mm
116
145
165
175
214
264
308
344
427
505
b
mm
28
36
49
45
55
70
74
86
114
125
width
width diameter
opening opening
c
mm
24
26
27
32
41
51
61
65
85
90
d
mm
20
22
23
27
35
43
53
58
78
82
e
mm
11
14
17
17
21
26
29
35
40
48
thickness weight
per pce
i
mm
15
18
20
23
29
37
46
58
63
82
kg
0.45
0.9
1.3
1.6
3.8
6.9
10.6
16
27
60
Hooks
: alloy steel
: MBL equals 4 x WLL
: painted red
galvanized or selfcoloured upon request
: test certificates can be supplied upon request
P-6731
working load
limit at hook
top
bottom
tons
2
tons
7.5
length
a
mm
167
diameter
eye
inside
b
mm
35
width
opening
c
mm
74
width
g
mm
57
weight
per pce
kg
2.65
1
2
3
4
5
6
: alloy steel
: MBL equals 5 x WLL
: painted red
galvanized or selfcoloured upon request
: test certificates can be supplied upon request
P-6706A
9
working
load
limit
tons
0.75
1.6
2
3
5
10
diameter
rope
mm
6-11
10-13
14-16
16-20
22-26
38-42
length
length
diameter
opening
thickness
a
mm
60
67
79
105
133
150
b
mm
112
127
148
175
209
255
c
mm
14
17
22
27
33
45
d
mm
17
18
21
24
37
45
e
mm
15
17
18
26
34
39
10
weight
per pce
11
kg
0.4
0.6
0.9
1.7
3.5
6.5
12
13
14
15
16
99
Applications
Eye bolts and eye nuts are used for lifting machines, appliances or any other objects which cannot be lifted by
hand or by fork lift truck.
Range
Van Beest offers a wide range of lifting eye bolts and eye nuts, from M6 up to M48, with Working Load Limits
from 0.07 tons up to 8.6 tons.
Larger sizes can be supplied on request.
Design
The eye bolts and eye nuts are manufactured from C15 steel, drop forged and with metric thread.
Each eye bolt and eye nut is individually stamped with:
-
Finish
The eye bolts and eye nuts can be either selfcoloured, electro-galvanized or hot dipped galvanized.
Certification
Test certificates can be supplied upon request.
10
It is required that the products are regularly inspected and that the inspection should take place in accordance
with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure.
Inspection should take place at least every six months and even more frequently when the products are used in
severe operating conditions.
100
S-8140
E-8140
Material
Safety factor
Standard
Finish
:
:
:
:
Certification
f
mm
6
6
8
10
12
12
14
14
14
18
18
22
22
26
26
30
30
35
g
mm
36
36
45
53
60
62
71
71
80
90
90
109
110
128
130
147
150
168
weight
per
100 pcs
kg
3
6
10.3
17.7
27.7
28
40.5
42.4
67.3
83.4
122
166
216
265
334
403
521
632
1
2
3
4
5
S-8142
E-8142
Material
Safety factor
Standard
Finish
Certification
working
load
limit
tons
0.07
0.14
0.23
0.34
0.49
0.7
1.2
1.5
1.8
2.5
3.6
4.3
5.1
6.1
7
8
8.6
diameter
thread
a
mm
M 6
M 8
M 10
M 12
M 14
M 16
M 20
M 22
M 24
M 27
M 30
M 33
M 36
M 39
M 42
M 45
M 48
:
:
:
:
diameter
base
b
mm
20
20
25
30
35
35
40
45
50
50
65
65
75
75
85
85
100
diameter
eye
outside
c
mm
36
36
45
54
63
63
72
81
90
90
108
108
126
126
144
144
166
diameter thickness
eye
base
inside
d
e
mm
mm
20
8.5
20
8.5
25
10
30
11
35
13
35
13
40
16
45
18
50
20
50
20
60
25
60
25
70
30
70
30
80
35
80
35
90
40
8
height
f
mm
36
36
45
53
60
62
71
80
90
90
109
110
128
130
147
150
168
weight
per
100 pcs
kg
4.2
5.2
9.4
16
22
24
35.2
58.6
70.6
102
132
170
208
260
311
407
502
9
10
11
12
13
14
15
16
101
Loadbinders
Applications
Loadbinders are used for easy and efficient tightening of chain used for lashing purposes. The loadbinders are
designed in such a way that they can effortlessly be operated using one hand.
Range
Van Beest offers three types of loadbinders: two ratchet types and a lever type, depending on the application. The
loadbinders are suitable for various chain sizes, ranging from 8 up to 16 mm. The ratchet types can be supplied
with two hooks or two eyes as endfittings.
Design
The Van Beest loadbinders are designed with an ergonomic, easy-to-use handle for simple, single-hand use,
and are manufactured from drop forged or cast steel. One ratchet type is equipped with standard chain eye grab
hooks, the other type has an improved version of these hooks to reduce chain wear substantially.
This type of loadbinder is designed to meet requirements of standard EN 12195-3.
Each handle carries the following markings:
-
Finish
The Van Beest loadbinders are painted either red or green.
Certification
Test certificates can be supplied upon request.
11
It is required that the products are regularly inspected and that the inspection should take place in accordance
with the safety standards given in the country of use. This is required because the products in use may be
affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material
structure. Inspection should take place at least every six months and even more frequently when the loadbinders
are used in severe operating conditions. Regularly lubricate moving parts of a loadbinder to extend product life
and reduce wear.
102
Loadbinders
Material
Safety factor
Standard
Finish
Certification
:
:
:
:
:
P-7170
chain
size
mm
8
10
13
16
b
mm
66
66
66
66
c
mm
16
16
16
16
length
open
length
closed
width
e
mm
742
789
866
892
f
mm
573
620
703
733
g
mm
11
13
17
20
d
mm
252
252
252
252
take-up lashing
capacity
mm
169
169
163
159
tons
4
6.3
10
16
tons
8
12.6
21.2
32.2
kg
4.5
5.4
7.7
10.2
1
2
3
4
5
Green Pin ratchet type loadbinders
Material
Safety factor
Standard
Finish
Certification
:
:
:
:
:
P-7190
9
chain
length
diameter thickness
size
length
length
length
barrel
open
closed
eye
lashing
proof
minimum
capacity
load
weight
inside
outside
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
tons
tons
tons
kg
355
66
16
252
513
344
20
52
169
3.8
10
355
66
16
252
513
344
20
52
169
7.9
12.6
4.6
13
355
66
16
252
513
350
26
60
163
10
12.5
21.2
6.9
16
355
66
16
252
511
352
26
64
159
16
20
32.2
9.3
10
load
6.3
11
12
13
14
15
16
103
Loadbinders
Material
Safety factor
Finish
Certification
:
:
:
:
P-7130
chain
size
mm
8-10
10-13
13-16
b
mm
66
66
66
c
mm
16
16
16
length
open
length
closed
width
e
mm
750
770
840
f
mm
580
600
685
g
mm
13
16
19
d
mm
254
254
254
take-up lashing
capacity
mm
170
170
155
kg
2450
4175
5900
kg
8620
14970
20865
kg
4.82
5.92
7.85
1
2
3
4
5
6
Material
Safety factor
Finish
Certification
:
:
:
:
P-7150
9
10
11
12
13
14
15
16
104
chain
length
size
handle
diameter thickness
length
length
length
barrel
open
closed
eye
lashing
proof
minimum
capacity
load
weight
inside
outside
load
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
kg
kg
kg
8-10
355
66
16
254
550
380
20
52
170
2450
4900
8620
3.95
10-13
355
66
16
254
550
380
20
52
170
4175
8350
14970
4.75
13-16
355
66
16
254
570
400
25
60
170
5900
11800
20865
6.65
kg
Loadbinders
Material
Safety factor
Finish
Certification
:
:
:
:
P-7110
chain
size
mm
8 -10
10 -13
length
length
open
length
closed
handle
length
length
length
width
a
mm
630
715
b
mm
580
662
c
mm
485
548
d
mm
406
475
e
mm
275
320
f
mm
275
310
g
mm
13
15
take-up lashing
capacity
mm
95
114
kg
2450
4175
kg
8620
14970
kg
2.81
5.08
1
2
3
g
4
5
6
7
8
9
10
11
12
13
14
15
16
105
Chain
Applications
Short and long link commercial grade 3 chain is for general purpose use. These types of chain may not be used
for lifting purposes.
Range
Van Beest supplies a wide range of commercial chain, generally to DIN 763 and DIN 766 ranging from 3 up to
20 mm.
Larger dimensions can be supplied on request.
Design
Chain supplied by Van Beest generally follows DIN 763 for the long link chain or DIN 766 for short link chain.
Steel quality used for chain production is mild steel grade 3.
These types of chain are not suitable for lifting purposes.
Finish
All chain is available in selfcoloured, electro-galvanized and hot dipped galvanized condition.
Certification
Test certificates can be supplied upon request.
It is required that the products are regularly inspected and that the inspection should take place in accordance
with the safety standards given in the country of use. This is required because the products in use may be
affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material
structure.
Inspection should take place at least every six months and even more frequently when the chain is used in severe
operating conditions.
12
106
Chain
S-7660
E-7661
G-7662
Material
Safety factor
Standard
Finish
Certification
:
:
:
:
:
diameter
length
inside
width
outside
a
mm
3
4
5
6
7
8
9
10
11
13
16
18
20
b
mm
16
16
18.5
18.5
22
24
27
28
31
36
45
50
56
c
mm
11
14
17
20
23
26
30
34
36
44
54
60
67
minimum
breaking
load
kg
340
800
1250
1600
2500
3200
4000
5000
6300
8000
12500
16000
20000
weight
per m
kg
0.17
0.32
0.5
0.75
1
1.35
1.8
2.25
2.7
3.8
5.8
7.3
9
1
2
3
4
5
6
S-7630
E-7631
G-7632
Material
Safety factor
Standard
Finish
Certification
:
:
:
:
:
diameter
length
inside
width
outside
a
mm
3
4
5
6
7
8
10
13
16
20
b
mm
26
32
36
42
48
54
66
82
100
125
c
mm
13
16
20
24
28
32
40
50
60
75
minimum
breaking
load
weight
per m
kg
320
630
1000
1250
1900
2500
4000
6300
10000
16000
kg
0.14
0.27
0.43
0.63
0.86
1.1
1.75
2.95
4.45
7
8
9
10
11
12
13
14
15
16
107
Applications
Plate lifting clamps are used for lifting and transportation of all kinds of steel plates and beams.
Range
Van Beest offers a wide range of lifting clamps for horizontal and/or vertical lifting of steel plates and beams
ranging from Working Load Limit 750 kg up to 20.000 kg.
The steel plates may have a thickness up to 150 mm.
Upon request other types of clamps can be manufactured.
Design
Four different designs have been developed:
type
type
type
type
Type E, EH and EU are also available as ES, EHS and EUS versions, which means that these versions have an
increased opening.
All types of lifting clamps carry the following markings:
Finish
The plate lifting clamps are made of carbon and alloy steel and are painted green to be recognized as a Green
Pin product.
Certification
All plate lifting clamps are supplied with a serial number and a manufacturers certificate. Test certificates can be
supplied upon request.
12
108
It is required that the products are regularly inspected and that the inspection should take place in accordance
with the safety standards given in the country of use. This is required because the products in use may be
affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material
structure.
Inspection should take place at least every six months and even more frequently when the clamps are used in
severe operating conditions.
E - ES
1
2
3
4
5
EU - EUS
6
7
8
9
Plate lifting clamps type EU and EUS.
Load reduction should be applied as per load direction angle and
corresponding remaining percentage of the Working Load Limit.
10
11
EH - EHS
100% WLL
12
13
14
15
16
109
Material
Safety factor
Finish
Certification
:
:
:
:
P-6615
type
0.75
1
1.5
2
3
4
6
7.5
9
12
15
20
1
2
working
load
limit
E
E
E
E
E
E
E
E
E
E
E
E
width
opening
length
opening
length
length
a
mm
0 - 14
0 - 22
0 - 22
0 - 28
0 - 28
0 - 32
0 - 32
0 - 42
0 - 52
0 - 75
0 - 75
0 - 75
b
mm
45
72
72
87
87
115
115
120
125
135
135
160
c
mm
115
200
200
237
237
293
293
350
380
480
480
550
d
mm
210
337
337
430
430
500
500
560
620
760
760
890
tons
0.75
1
1.5
2
3
4
6
7.5
9
12
15
20
diameter
inside
eye
e
mm
30
57
57
70
70
86
86
80
88
90
90
100
width
thickness
f
mm
104
170
170
218
218
226
226
305
274
410
410
490
g
mm
36
44
52
65
77
69
85
90
90
130
130
140
width
thickness
f
mm
114
186
186
240
240
252
252
335
274
485
485
565
g
mm
36
44
52
65
77
69
85
90
90
130
130
140
weight
per pce
kg
1.5
6
7.1
13.2
14.2
21
24.2
35
48
90
90
132
3
4
5
6
7
8
P-6616
Material
Safety factor
Finish
Certification
:
:
:
:
9
10
type
11
0.75
1
1.5
2
3
4
6
7.5
9
12
15
20
12
13
14
15
16
110
ES
ES
ES
ES
ES
ES
ES
ES
ES
ES
ES
ES
working
load
limit
tons
0.75
1
1.5
2
3
4
6
7.5
9
12
15
20
width
opening
length
opening
length
length
a
mm
12 - 24
18 - 38
18 - 38
23 - 50
23 - 50
26 - 58
26 - 58
30 - 72
48 -100
75 -150
75 -150
75 -150
b
mm
45
72
72
87
87
115
115
120
125
135
135
160
c
mm
115
200
200
237
237
293
293
350
380
480
480
550
d
mm
210
337
337
430
430
500
500
560
620
760
760
890
diameter
inside
eye
e
mm
30
57
57
70
70
86
86
80
88
90
90
100
weight
per pce
kg
1.5
6
7.1
13.2
14.2
21
24.2
35
48
90
94
132
Material
Safety factor
Finish
Certification
:
:
:
:
P-6625
type
0.75 EU
1.5 EU
3
EU
6
EU
7.5 EU
9
EU
12
EU
working
load
limit
width
opening
length
opening
length
length
a
mm
0 - 14
0 - 22
0 - 28
0 - 32
0 - 42
0 - 52
0 - 75
b
mm
45
72
87
115
120
125
135
c
mm
115
200
237
293
350
380
480
d
mm
220
327
450
480
580
700
780
tons
0.75
1.5
3
6
7.5
9
12
diameter
inside
eye
e
mm
31
68
80
80
80
90
115
width
thickness
f
mm
104
170
218
226
305
274
410
g
mm
36
52
77
85
90
90
130
weight
per pce
kg
1.6
7.9
15.2
26
35
52
94
1
2
3
4
5
6
P-6626
Material
Safety factor
Finish
Certification
:
:
:
:
8
9
type
0.75
1.5
3
6
7.5
9
12
EUS
EUS
EUS
EUS
EUS
EUS
EUS
working
load
limit
tons
0.75
1.50
3
6
7.5
9
12
width
opening
length
opening
length
length
a
mm
12 - 24
18 - 38
23 - 50
26 - 58
30 - 72
48 - 100
75 - 150
b
mm
45
72
87
115
120
125
135
c
mm
115
200
237
293
350
380
480
d
mm
220
327
430
480
580
700
780
diameter
inside
eye
e
mm
31
68
80
80
80
90
115
width
thickness
f
mm
114
186
240
252
335
384
485
g
mm
36
52
78
95
100
100
140
weight
per pce
10
11
kg
1.6
7.9
15
26
35
52
94
12
13
14
15
16
111
Material
Safety factor
Finish
Certification
:
:
:
:
P-6635
type
1.5
3
4
6
8
10
14
18
EH
EH
EH
EH
EH
EH
EH
EH
working
width thickness diameter thickness
load limit opening
eye
per set
a
b
c
d
tons
mm
mm
mm
mm
1.5
0 - 22
18
16.2
12
3
0 - 60
16
23
25
4
0 - 60
20
42
25
6
0 - 60
20
42
25
8
0 - 60
25
42
25
10
0 - 60
25
42
30
14
0 - 60
30
48
35
18
0 - 60
30
48
40
width
length
width
e
mm
16
18
22
22
27
27
32
32
f
mm
70
155
155
155
155
155
155
155
g
mm
60
80
80
100
120
120
130
150
weight
per set
kg
4
11
16.4
17.8
20
28
36
48.2
2
3
4
5
6
7
P-6636
Material
Safety factor
Finish
Certification
:
:
:
:
8
9
type
10
3
4
6
8
10
14
18
11
12
13
14
15
16
112
working
width thickness diameter thickness
load limit opening
eye
per set
a
b
c
d
tons
mm
mm
mm
mm
EHS
3
0 - 100
16
23
25
EHS
4
0 - 100
20
42
25
EHS
6
0 - 100
20
42
25
EHS
8
0 - 100
25
42
25
EHS 10
0 - 100
25
42
30
EHS 14
0 - 100
30
48
40
EHS 18
0 - 100
30
48
40
width
length
width
e
mm
18
22
22
27
27
32
32
f
mm
155
155
155
155
155
155
155
g
mm
80
80
100
120
120
130
150
weight
per set
kg
12.4
17.6
20
26
32
40
52
Material
Safety factor
Finish
Certification
P-6685
type
2
3
4
5
6
ESV
ESV
ESV
ESV
ESV
:
:
:
:
working width
width
length
load
jaw
jaw
limit
opening opening
a
b
c
tons
mm
mm
mm
2
0 - 160 60 - 200
270
3
0 - 160 60 - 200
270
4
0 - 250 80 - 310
400
5
0 - 260 90 - 320
400
6
0 - 340 85 - 420
480
height diameter
eye
inside
d
e
mm
mm
210 - 250
65
250 - 290
65
285 - 370
70
355 - 445
80
360 - 510
80
width
thickness
width
f
mm
120
120
125
125
125
g
mm
16
16
20
20
20
h
mm
22
22
28
36
36
weight
per pce
kg
5.1
5.3
8.6
11.1
14
1
2
3
4
5
6
7
8
10
11
P-6654 cam assembly
12
S-6656 pivot
13
14
S-6657 eye pin
15
16
113
Blocks
Applications
Blocks are used in lifting systems, to change load direction or to drag a load. Together with the wire rope, blocks
are the connection between the load to be lifted and the lifting device.
Range
Van Beest offers a wide range of blocks, from single sheave snatch blocks to multiple-sheave malleable
iron blocks for use with wire or fibre rope. Standard blocks are suited for head loads ranging from 0.4 up to
20 tons.
Other types of blocks can be offered upon special request.
Design
There are different types of blocks with their specific designs to suit a particular purpose. Some types are equipped with bronze bushes while other types have ball bearings depending on frequency of use and line speed.
Snatch blocks allow the wire rope to be attached easily by opening up the block instead of threading the wire
rope through the block.
All types carry the following markings:
Finish
Blocks can be either painted, electro-galvanized or selfcoloured.
Certification
All blocks can be supplied with test certificates upon request.
14
It is required that the products are regularly inspected and that the inspection should take place in accordance
with the safety standards given in the country of use. This is required because the products in use may be
affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material
structure.
Inspection should take place at least every six months and even more frequently when the blocks are used in
severe operating conditions.
114
All working load limits of our blocks are the maximum loads on the blocks and their connecting fittings.
The load on a sheave or block varies with the angle between the lead and load line. See figure 1. When the
two lines are parallel, 1000 kg on the lead line results in a load of 2000 kg on the fitting. As the working angle
between the lines increases, the load on the fitting is reduced by the angle factor as per table 1. All loads shown
ignore frictional losses in the lifting system.
working
angle
0
10
20
30
40
45
50
60
70
80
90
100
110
120
130
135
140
150
160
170
180
angle
factor
2
1.99
1.97
1.93
1.87
1.84
1.81
1.73
1.64
1.53
1.41
1.29
1.15
1
0.84
0.76
0.68
0.52
0.35
0.17
0
Blocks
Loads on blocks
1
2
3
Table 1
4
5
6
7
8
Figure 1
9
10
11
12
13
14
15
16
115
Blocks
2 parts of line
1
2
3 parts of line
4 parts of line
5 parts of line
6 parts of line
L
R=
P
4
5
6
7
8
9
10
L = 16 tons
number of
parts
of line
1
2
3
4
5
6
7
8
9
10
11
12
bronze
bushed
sheaves
0.96
1.87
2.75
3.59
4.39
5.16
5.90
6.60
7.27
7.91
8.52
9.11
roller
bearing
sheaves
0.98
1.98
2.88
3.81
4.71
5.60
6.47
7.32
8.16
8.98
9.79
10.6
Table 2
Example:
11
P = 3 tons
How many parts of line are needed?
12
R=
13
Refer to ratio 5.3 in table 2 or the next larger number nearest to it, and then check the column under the header number of parts of line
For blocks with roller bearing sheaves this results in 6 parts of line that should be used to lift a 16 tons load with a line pull of 3 tons.
L
P
14
15
16
116
16
=
= 5.3
3
Blocks
Snatch blocks
type 601S, with shackle
Material
: carbon steel, fitted with roller bearings, except for blocks with
WLL 4 tons, these are equipped with phosphor bronze bushes
: MBL equals 4 x WLL
: painted
: blocks have been individually proof load tested
test certificates can be supplied upon request
: Working Load Limit is on the headfitting
Safety factor
Finish
Certification
Note
P-6951
working
load
limit
diameter
wire
rope
tons
2
4
4
8
12
15
4
8
12
15
8
12
15
8
12
15
8
12
15
8
12
15
8
12
15
mm
7-9
10 - 12
12 - 14
20 - 22
20 - 22
24 - 26
10 - 12
20 - 22
20 - 22
24 - 26
20 - 22
20 - 22
24 - 26
20 - 22
20 - 22
24 - 26
20 - 22
20 - 22
24 - 26
20 - 22
20 - 22
24 - 26
20 - 22
20 - 22
24 - 26
diameter
outside
sheave
a
mm
75
114
152
152
152
152
203
203
203
203
254
254
254
305
305
305
357
357
357
406
406
406
457
457
457
length
width
width
outside
weight
per pce
b
mm
230
330
371
483
584
600
422
533
635
651
584
686
702
635
737
752
686
787
803
737
838
854
787
889
905
c
mm
57
80
80
125
127
127
83
125
127
127
125
127
127
125
127
127
125
127
127
125
127
127
125
127
127
d
mm
80
121
159
159
162
162
210
210
213
213
260
264
264
311
314
314
362
365
365
412
416
416
464
467
467
kg
4
5.3
6.5
12.5
25
25
8.3
15.5
27.5
28
19.5
30
30
24
32.8
33
32
35
36
36
38
39
41
44
44.5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
117
Blocks
Snatch blocks
type 601H, with hook
Material
: carbon steel, fitted with roller bearings, except for blocks with
WLL 4 tons, these are equipped with phosphor bronze bushes
: MBL equals 4 x WLL
: painted
: blocks have been individually proof load tested
test certificates can be supplied upon request
: Working Load Limit is on the headfitting
Safety factor
Finish
Certification
Note
P-6952
1
2
3
4
5
6
7
working
load
limit
diameter
wire
rope
tons
2
4
4
8
12
15
4
8
12
15
8
12
15
8
12
15
8
12
15
8
12
15
8
10
15
mm
7-9
10 - 12
12 - 14
20 - 22
20 - 22
24 - 26
10 - 12
20 - 22
20 - 22
24 - 26
20 - 22
20 - 22
24 - 26
20 - 22
20 - 22
24 - 26
20 - 22
20 - 22
24 - 26
20 - 22
20 - 22
24 - 26
20 - 22
20 - 22
24 - 26
diameter
outside
sheave
a
mm
75
114
152
152
152
152
203
203
203
203
254
254
254
305
305
305
357
357
357
406
406
406
457
457
457
length
thickness
width
outside
weight
per pce
b
mm
230
343
384
445
572
587
435
495
622
638
546
673
689
597
724
740
648
775
791
699
825
841
749
876
892
c
mm
57
83
83
108
127
127
83
108
127
127
108
127
127
108
127
127
108
127
127
108
127
127
108
127
127
d
mm
80
121
159
159
162
162
210
210
213
213
260
264
264
311
314
314
362
365
365
412
416
416
464
467
467
kg
4
5
6
12.5
23
23
8
15
25
26
19
28
28
23
31
31
31
33
33
36
36
36
40
42
43
Snatch blocks
type 601T
Material
: carbon steel, fitted with roller bearings, except for blocks with
WLL 4 tons, these are equipped with phosphor bronze bushes
: MBL equals 4 x WLL
: painted
: blocks have been individually proof load tested
test certificates can be supplied upon request
: Working Load Limit is on the headfitting
Safety factor
Finish
Certification
10
P-6953
11
12
13
14
15
16
118
Note
working
load
limit
diameter
wire
rope
tons
4
8
8
8
mm
10 - 12
20 - 22
20 - 22
20 - 22
diameter
outside
sheave
a
mm
114
152
203
254
length
thickness
width
outside
weight
per pce
b
mm
213
305
357
406
c
mm
83
108
108
108
d
mm
121
159
210
260
kg
4
9
12
16
with eye, one sheave, for use with wire or fibre rope
Material
Safety factor
Finish
Certification
Note
E-6917
working diameter
load
rope
limit
tons
0.4
0.8
1
2
2.2
2.4
3.6
mm
12
16
18
24
26
28
32
length
a
mm
165
229
286
343
356
387
508
b
mm
76
102
127
152
177
203
254
diameter thickness
c
mm
45
60
83
92
111
137
178
d
mm
29
32
38
51
51
56
60
width
inside
length
inside
weight
per pce
e
mm
16
19
25
32
32
32
44
f
mm
25
35
51
56
56
56
67
kg
0.9
1.5
2.2
4
4.5
6
13.5
Blocks
1
2
3
4
5
6
7
Safety factor
Finish
Certification
E-6918
Note
working
load
limit
diameter
rope
tons
0.4
0.8
1
2
2.2
2.4
3.6
mm
12
16
18
24
26
28
32
length
a
mm
194
248
305
356
368
400
486
b
mm
76
102
127
152
177
203
254
diameter thickness
c
mm
45
60
83
92
111
137
178
d
mm
29
32
38
51
51
56
60
width
inside
weight
per pce
e
mm
16
27
32
32
32
32
48
kg
0.9
1.5
2.2
4
4.5
6
13.5
9
10
11
12
13
14
15
16
119
Blocks
Safety factor
Finish
Certification
Note
E-6922
working diameter
load
rope
limit
tons
0.4
0.9
1.1
2
2.3
2.6
3.5
mm
12
16
18
24
26
28
32
length
a
mm
165
229
286
343
356
387
508
b
mm
76
102
127
152
177
203
254
diameter thickness
c
mm
45
60
83
92
111
137
178
d
mm
49
56
67
89
89
100
108
width
inside
length
inside
weight
per pce
e
mm
16
19
25
32
32
32
44
f
mm
25
35
51
56
56
56
67
kg
1
2
3.3
5.5
6.8
9
23.5
2
3
4
5
6
7
Material
Safety factor
Finish
Certification
10
E-6923
Note
11
12
13
14
15
16
120
working
load
limit
diameter
rope
tons
0.4
0.9
1.1
2
2.3
2.6
3.5
mm
12
16
18
24
26
28
32
length
a
mm
194
248
305
356
368
400
486
b
mm
76
102
127
152
177
203
254
diameter thickness
c
mm
45
60
83
92
111
137
178
d
mm
49
56
67
89
89
100
108
width
inside
weight
per pce
e
mm
16
27
32
32
32
32
48
kg
1
2
3.3
5.5
6.8
9
23.5
with eye, three sheaves, for use with wire or fibre rope
Material
Safety factor
Finish
Certification
Note
E-6927
working diameter
load
rope
limit
tons
0.5
1
1.5
2
2.4
3
4
mm
12
16
18
24
26
28
32
length
a
mm
187
229
292
343
356
406
508
b
mm
76
102
127
152
177
203
254
diameter thickness
c
mm
45
60
83
92
111
137
178
d
mm
73
81
98
127
136
143
162
width
inside
length
inside
weight
per pce
e
mm
19
19
25
32
30
44
38
f
mm
35
35
51
57
57
67
95
kg
1.5
2.6
5
8
11
13.8
36.5
Blocks
1
2
3
4
5
6
7
Safety factor
Finish
Certification
E-6928
Note
working
load
limit
diameter
rope
tons
0.5
1
1.5
2
2.4
3
4
mm
12
16
18
24
26
28
32
length
a
mm
194
248
305
356
368
400
486
b
mm
76
102
127
152
177
203
254
diameter thickness
c
mm
45
60
83
92
111
137
178
d
mm
73
81
98
127
136
143
162
width
inside
weight
per pce
e
mm
16
27
29
36
36
41
44
kg
1.5
2.6
5
8
11
13.8
36.5
8
9
10
11
12
13
14
15
16
121
Blocks
E-6943
working diameter
load
rope
limit
tons
0.8
1
1.6
2.2
mm
16
18
20
24
: galvanized malleable iron, sheave in grey iron with plain bore (iron
bush) or oil retaining sintered bronze bush
: MBL equals 5 x WLL
: electro-galvanized
: blocks have been individually proof load tested
test certificates can be supplied upon request
: Working Load Limit is on the headfitting
length
length
a
mm
219
276
302
378
b
mm
102
127
152
203
diameter thickness
c
mm
54
63
82
127
d
mm
38
38
38
51
width
inside
length
inside
weight
per pce
e
mm
19
25
25
32
f
mm
35
51
51
57
kg
1.5
1.8
3.5
6
1
2
3
4
5
6
7
Material
Safety factor
Finish
Certification
10
E-6944
11
12
13
14
15
16
122
Note
working
load
limit
diameter
rope
tons
0.8
1
1.6
2.2
mm
16
18
20
24
: galvanized malleable iron, sheave in grey iron with plain bore (iron
bush) or oil retaining sintered bronze bush
: MBL equals 5 x WLL
: electro-galvanized
: blocks have been individually proof load tested
test certificates can be supplied upon request
: Working Load Limit is on the headfitting
length
length
a
mm
238
295
321
391
b
mm
102
127
152
203
diameter thickness
c
mm
54
63
82
127
d
mm
38
38
38
51
width
inside
weight
per pce
e
mm
27
27
29
36
kg
1.5
1.8
3.5
6
Blocks
P-6916
working
load
limit
diameter
wire
rope
tons
6
6
10
10
10
20
mm
20 - 22
20 - 22
24 - 26
24 - 26
24 - 28
32 - 35
: carbon steel
sheave with taper roller bearing
: MBL equals 5 x WLL
: painted
selfcoloured or galvanized on request
: blocks have been individually proof load tested
test certificates can be supplied upon request
: Working Load Limit is on the headfitting
length
a
mm
686
692
686
762
940
940
diameter thickness
b
mm
254
305
305
357
406
406
c
mm
130
117
130
127
139
139
width
inside
length
inside
weight
per pce
d
mm
51
45
51
51
76
76
e
mm
98
98
102
102
165
165
kg
27
28
33
40
90
90
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
123
General Hardware
Applications
General hardware items, such as carabine hooks, quick links and s-hooks, are suitable for many different applications in various market segments like agriculture, industry, transportation, etc.
Range
Van Beest offers a wide range of general hardware products such as:
Carabine hooks in four different types ranging from 4 up to 14 mm.
Two types of quick links ranging from 4 up to 16 mm.
Chain repair links from 3 up to 10 mm.
Spring pins from 2 up to 8 mm.
S-hooks from 3 up to 8 mm.
Linch pins from 4.5 up to 11 mm.
Design
General hardware items are typically designed for multiple purpose usage.
Finish
General hardware items are electro-galvanized.
Certification
All general hardware can be supplied with test certificates upon request.
15
124
standard type
Material
Finish
E-7200
: mild steel
: electro-galvanized
diameter
length
width
width
inside
width
inside
a
mm
4
5
6
7
8
9
10
11
12
13
14
b
mm
40
50
60
70
80
90
100
120
140
160
180
c
mm
14
16
18
22
24
26
30
36
40
44
48
d
mm
5
7
7
9
11
11
12
14
16
20
20
e
mm
7
8
9
10
12
12
15
18
20
22
22
minimum
breaking
load
weight
per
100 pcs
kg
kg
0.6
0.8
1.6
2.6
4.4
6.4
9.3
12.5
19.5
25
35
100
120
180
300
330
460
600
680
800
860
General Hardware
Carabine hooks
1
2
3
4
5
6
7
Carabine hooks
with pressed thimble
Material
Finish
: mild steel
: electro-galvanized
9
10
E-7210
diameter
length
a
mm
4
5
6
7
8
9
10
11
12
13
14
b
mm
40
50
60
70
80
90
100
120
140
160
180
diameter
inside
thimble
c
mm
4
5
6
7
10
12
13
13
15
17
17
width
d
mm
14
16
18
22
24
26
30
36
40
44
48
minimum
breaking
load
weight
per
100 pcs
kg
100
120
180
300
330
460
600
680
800
860
kg
0.8
1.6
2.6
4.4
6.4
9.3
12.5
19.5
25
35
50
11
12
13
14
15
16
125
General Hardware
Carabine hooks
with screw nut
Material
Finish
: mild steel
: electro-galvanized
diameter
length
width
inside
width
inside
a
mm
4
5
6
7
8
9
10
11
12
13
14
b
mm
40
50
60
70
80
90
100
120
140
160
180
c
mm
4
5
6
7
10
12
13
13
15
17
17
d
mm
7
7
8
10
12
12
15
16
19
28
28
E-7220
1
2
minimum
breaking
load
weight
per
100 pcs
kg
100
120
180
300
330
460
600
680
800
860
kg
1.7
1.9
2.9
4.6
6.9
10.3
13.4
19
26.5
37
52
3
4
5
6
7
Carabine hooks
with pressed thimble and screw nut
Material
Finish
: mild steel
: electro-galvanized
10
E-7230
11
12
13
14
15
16
126
diameter
length
a
mm
4
5
6
7
8
9
10
11
12
13
14
b
mm
40
50
60
70
80
90
100
120
140
160
180
diameter
inside
thimble
c
mm
4
5
6
7
9
10
11
12
13
15
17
minimum
breaking
load
weight
per
100 pcs
kg
100
120
180
300
330
460
600
680
800
860
kg
0.8
1.6
2.6
4.4
6.4
9.3
12.5
19.5
25
35
50
standard type
Material
Finish
: mild steel
: electro-galvanized
E-7300
diameter
width
inside
length
inside
opening
a
mm
3.5
4
5
6
7
8
9
10
12
14
16
b
mm
10
11
13
14
16
17
17
20
23
26
29
c
mm
29
32
39
46
51
59
64
70
83
97
112
d
mm
5
5
6
7
8
10
11
12
14
17
20
minimum
breaking
load
weight
per
100 pcs
kg
240
300
540
750
1125
1500
2000
2400
3600
5000
6000
kg
0.9
1.3
2
3.3
5.3
7.5
10.3
13
25
35
50
General Hardware
Quick links
1
2
3
4
5
6
7
Quick links
with enlarged opening
Material
Finish
: mild steel
: electro-galvanized
E-7310
10
diameter
width
inside
length
inside
opening
a
mm
4
5
6
7
8
9
10
12
14
16
b
mm
12
14
16
17
19
20
22
25
28
31
c
mm
45
52
58
65
73
79
88
102
114
129
d
mm
11
13
14
16
17
19
20
23
26
29
minimum
breaking
load
kg
800
1250
1750
2500
3250
4000
5000
6250
10000
12500
weight
per
100 pcs
kg
1.4
2.5
4.2
6.7
9.4
13.1
17.5
28.2
45.6
60.7
11
12
13
14
15
16
127
General Hardware
: mild steel
: electro-galvanized
diameter
width
inside
length
inside
opening
a
mm
3
4
4.5
5
5.5
6
6.5
7
8
9
10
b
mm
6.5
8
9
9.5
10.5
10.5
11.5
13.5
15
16.5
17
c
mm
16.5
20
22
23
26
29
30
32
37
37.5
37.5
d
mm
4
5.5
6
6
6
7
8
8.5
9
9
9
E-7910
1
2
weight
per
100 pcs
kg
0.4
0.8
1.1
1.2
1.8
2.1
3.2
3.9
5.6
7.6
9.5
3
4
5
6
7
S-hooks
standard type
Material
Finish
: mild steel
: electro-galvanized
10
E-7920
11
12
13
14
15
16
128
diameter
length
opening
a
mm
3
4
5
6
7
8
b
mm
25
35
45
55
65
75
c
mm
6
8
9
10
17
20
weight
per
100 pcs
kg
0.3
0.8
1.3
2.4
4.3
6.9
General Hardware
Spring pins
single type
Material
Finish
E-7930
: mild steel
: electro-galvanized
diameter
length
diameter
diameter
a
mm
2
3
4
5
6
7
8
b
mm
50
60
60
85
105
105
110
c
mm
10
18
20
24
30
30
28
d
mm
9 - 14
10 - 16
16 - 20
20 - 28
28 - 40
28 - 45
30 - 45
weight
per
100 pcs
kg
0.3
0.9
1.6
3.3
6.2
8.3
10.5
1
2
3
4
5
6
7
Spring pins
double type
Material
Finish
8
: mild steel
: electro-galvanized
9
10
E-7931
diameter
length
diameter
diameter
a
mm
2
3
4
5
6
7
8
b
mm
50
62
78
92
120
130
130
c
mm
10
16
23
26
30
30
30
d
mm
8 - 14
14 - 20
17 - 24
18 - 30
24 - 36
24 - 40
24 - 45
11
weight
per
100 pcs
12
kg
0.4
1.4
3
5.3
9.6
13.5
17.8
13
14
15
16
129
General Hardware
Linch pins
with round spring ring
Material
Finish
: mild steel
: electro-galvanized
diameter
pin
diameter
spring ring
a
mm
4.5
6
7
8
9
10
11
b
mm
3.4
3.4
3.4
3.4
3.4
3.4
3.4
E-7940
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
130
width
inside
spring ring
c
mm
34
41
41
41
41
41
41
length
pin
d
mm
42
42
42
42
42
42
42
weight
per
100 pcs
kg
2
2.8
3
3.5
3.8
4.4
4.6
General Hardware
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
131
Applications
Specially in circumstances where corrosion can cause problems, the use of stainless steel products is recommended.
Range
Van Beest offers a wide range of stainless steel items like shackles, thimbles, wire rope clips, eye bolts, rigging
screws etc.
Upon special request other stainless steel items can be manufactured.
Design
Items supplied by Van Beest are all manufactured from stainless steel quality AISI 316.
All stainless steel items have an equivalent in a regular steel quality, we refer to the specific chapters for further
design details.
Finish
All stainless steel items are polished.
16
132
: AISI 316
: polished
R-7825
working
load
limit
tons
0.12
0.15
0.3
0.4
0.6
1
1.5
2
3
3.5
4.5
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
width
bow
a
mm
4
5
6
8
10
12
16
19
22
25
28
32
b
mm
4
5
6
8
10
12
16
19
22
25
28
32
c
mm
8
10
12
16
20
24
32
38
44
50
56
64
d
mm
8
10
12
16
20
24
32
38
44
50
56
64
e
mm
16
20
24
32
40
48
64
76
88
100
112
128
f
mm
14
17
21
28
34
42
56
66
77
87
98
112
weight
per
100 pcs
kg
1.2
1.8
2.8
6.4
15
22
55
97
146
211
285
326
Shackles
1
2
3
4
5
6
Shackles
dee shackle with screw pin
Material
Finish
: AISI 316
: polished
R-7821
10
working
load
limit
tons
0.12
0.15
0.3
0.4
0.6
1
1.5
2
3
3.5
4.5
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
a
mm
4
5
6
8
10
12
16
19
22
25
28
32
b
mm
4
5
6
8
10
12
16
19
22
25
28
32
c
mm
8
10
12
16
20
24
32
38
44
50
56
64
d
mm
8
10
12
16
20
24
32
38
44
50
56
64
e
mm
16
20
24
32
40
48
64
76
88
100
112
128
weight
per
100 pcs
kg
1.1
1.6
2.4
5.6
13
20
48
84
127
184
250
372
11
12
13
14
15
16
133
Shackles
long dee type
Material
Finish
: AISI 316
: polished
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
a
mm
4
5
6
8
10
12
b
mm
4
5
6
8
10
12
c
mm
8
10
12
16
20
24
d
mm
8
10
12
16
20
24
e
mm
30
37
45
60
75
90
R-7829
weight
per
100 pcs
kg
1
2
4
9
20
32
1
2
3
4
5
6
7
Shackles
short twisted type
Material
Finish
: AISI 316
: polished
10
R-7822
11
12
13
14
15
16
134
diameter
bow
diameter
pin
diameter
eye
width
inside
length
inside
a
mm
5
6
8
10
12
b
mm
5
6
8
9.5
12
c
mm
10
12
16
19
24
d
mm
10
12
16
20
24
e
mm
36
42
56
60
72
weight
per
100 pcs
kg
2
4
9
11
32
heavy type
Material
Finish
R-7860
: AISI 316
: polished
width
groove
width
inside
a
mm
2
2.5
3
4
5
6
7
8
10
12
14
16
18
20
22
24
26
b
mm
9
9.5
10
11
13
16
18
20
26
28
34
37
42
45
50
58
66
length
inside
c
mm
15
15.7
16
17
20
25
28
32
40
45
56
62
65
78
88
96
105
length
thickness
d
mm
23
24
25
28
32
39
40
49
55
70
80
85
95
115
125
135
140
e
mm
1
1
1
1
1
1.2
1.2
1.4
1.9
2
2.2
2.5
2.5
3
3
4
4
weight
per
100 pcs
kg
0.2
0.2
0.4
0.5
0.6
1
1.2
1.8
2.9
4.6
7.3
9.7
16.5
21.3
22.3
40.5
49.7
Thimbles
1
2
3
4
5
6
7
R-7863
Standard
Finish
: Bridge
: AISI 316
Nuts
: AISI 316
U-bolt
: AISI 316
: generally to DIN 741
: polished
9
10
diameter diameter
wire
bow
rope
a
mm
mm
3
4
5
5
6
5
8
6
10
8
13
10
16
12
19
12
22
14
length
bow
width
inside
length
thread
b
mm
20
24
28
34
42
55
63
75
85
c
mm
9
11
13
16
19
24
29
32
37
d
mm
12
13
15
19
22
30
33
38
44
f
mm
10
11
12
14
18
23
26
29
33
g
mm
10
10
11
15
17
21
26
30
34
weight
per
100 pcs
kg
1.4
1.5
2.1
4.1
6.8
13
21
28
40
11
12
13
14
15
16
135
R-7837
: AISI 316
: polished
diameter length
length
thread
closed
open
position position
a
b
c
mm
mm
mm
M 5
120
175
M 6
184
270
M 8
200
280
M 10
234
323
M 12
260
343
M 16
322
438
M 20
382
514
length
body
length
length
d
mm
70
110
110
125
125
170
200
e
mm
60
92
100
117
130
161
191
f
mm
40
55
57
68
70
88
105
h
mm
13
15
15
11
13
17
21
kg
0.04
0.1
0.17
0.26
0.52
1.1
1.8
2
3
4
5
6
7
Material
Finish
9
10
: AISI 316
: polished
R-7838
11
diameter length
length
thread closed
open
position position
a
b
c
mm
mm
mm
12
M
M
M
M
M
M
M
13
14
15
16
136
5
6
8
10
12
16
20
110
172
184
222
241
311
358
165
258
264
311
324
427
490
length
length
length
length
d
mm
e
mm
f
mm
g
mm
70
110
110
125
125
170
200
55
77
85
106
117
144
170
55
80
84
105
111
150
167
40
55
57
68
70
88
105
6
8
10.5
13
16
20
21
13
15
15
11
13
17
21
16
20
22
31
35
47
52
7
9
10
14
16
22
24
0.04
0.11
0.2
0.28
0.43
1
1.6
Eye - Eye
Material
Finish
R-7839
: AISI 316
: polished
diameter length
length
thread
closed
open
position position
a
b
c
mm
mm
mm
M 5
110
165
M 6
160
246
M 8
168
248
M 10
210
300
M 12
222
305
M 16
300
416
M 20
334
466
length
body
length
length
d
mm
70
110
110
125
125
170
200
e
mm
55
80
84
105
110
143
165
f
mm
40
55
57
68
70
88
105
1
2
3
4
5
6
7
Material
Finish
: AISI 316
: polished
R-7830
b, c
10
diameter
thread
length
open
length
closed
length
body
diameter
pin
a
mm
M 5
M 6
M 8
M10
M12
M14
M16
M20
b
mm
190
210
240
270
360
385
450
450
c
mm
125
155
180
220
255
270
320
355
d
mm
80
95
105
125
150
165
190
210
e
mm
5.2
6.2
8.7
9.7
12.7
12.7
16
19
width
jaw
inside
f
mm
6
7.5
10
12
14
14
16
20
weight
per
100 pcs
kg
6.5
8.1
13.9
25.3
57.3
64
94.2
145
11
12
13
14
15
16
137
Fork terminals
swage type
Material
Finish
R-7834
diameter
wire
rope
mm
3
4
5
6
7
8
9.5
10
12
: AISI 316
: polished
diameter
inside
diameter
outside
diameter
pin
length
length
inside
width
jaw
a
mm
3.3
4.3
5.3
6.6
7.5
8.3
10
10.5
12.5
b
mm
6.3
7.5
9
12.5
14.2
16
17
17.8
20
c
mm
5.2
6.2
8.7
9.7
12.6
14.6
16.5
16.5
19
d
mm
65
77
88
106
116
145
150
150
204
e
mm
32
40
57
63
70
85
87
89
105
f
mm
7.5
10
12
14
14.5
16
17
17
25
weight
per
100 pcs
kg
2.3
4.9
7.2
13.9
18.1
21.6
48
52
67
2
3
4
5
6
7
Eye terminals
swage type
Material
Finish
9
10
: AISI 316
: polished
R-7835
11
12
13
14
15
16
138
length
inside
length
c
mm
36
39
50
d
mm
58
65
80
swage type
Material
Finish
diameter
wire
rope
R-7836
mm
3
4
5
6
8
10
: AISI 316
: polished
thread
diameter
inside
diameter
outside
length
length
inside
a
mm
M 6
M 8
M 10
M 12
M 16
M 20
b
mm
3.3
4.3
5.3
6.3
8.3
10.3
c
mm
6.3
7.5
9
12
16
18
d
mm
100
117
130
162
195
230
e
mm
39
45
51
64
76
89
weight
per
100 pcs
kg
2.7
5.4
7.8
15.1
23.2
59
Threaded terminals
1
2
3
4
5
6
7
Swivels
Eye - Eye
Material
Finish
: AISI 316
: polished
9
10
R-7877
diameter
length
length
inside
width
outside
width
inside
a
mm
5
6
8
10
13
16
19
b
mm
60
65
90
115
154
188
229
c
mm
13
15
22
27
35
45
50
d
mm
23
21
35
44
57
71
84
e
mm
13
15
20
24
32
39
41
minimum
breaking
load
kg
820
1350
2500
3500
6000
10800
16100
weight
per
100 pcs
kg
3.4
5.1
13.1
26
58
105
220
11
12
13
14
15
16
139
Eye bolts
generally to DIN 580
Material
Standard
Finish
: AISI 316
: generally to DIN 580
: polished
R-7840
diameter
thread
diameter
base
a
mm
M 6
M 8
M 10
M 12
M 16
b
mm
20
20
25
30
35
diameter
eye
outside
c
mm
36
36
45
54
63
diameter
eye
inside
d
mm
20
20
25
30
35
length
thread
thickness
base
height
e
mm
13
13
17
20.5
27
f
mm
6
6
8
10
12
g
mm
36
36
45
53
62
weight
per
100 pcs
kg
3
6
10.3
17.7
28
1
2
3
4
5
Eye nuts
Material
Standard
Finish
: AISI 316
: generally to DIN 582
: polished
R-7842
9
10
11
12
13
14
15
16
140
diameter
thread
diameter
base
a
mm
M 6
M 8
M 10
M 12
M 16
b
mm
20
20
25
30
35
diameter
eye
outside
c
mm
36
36
45
54
63
diameter
eye
inside
d
mm
20
20
25
30
35
thickness
base
height
e
mm
8.5
8.5
10
11
13
f
mm
36
36
45
53
62
weight
per
100 pcs
kg
4.2
5.2
9.4
16
24
standard type
Material
Finish
R-7872
: AISI 316
: polished
diameter
length
width
inside
width
inside
a
mm
4
5
6
7
8
9
10
11
12
13
14
b
mm
40
50
60
70
80
90
100
120
140
160
180
c
mm
5
7
7
9
11
11
12
14
16
20
20
d
mm
7
8
9
10
12
12
15
18
20
22
22
minimum
breaking
load
weight
per
100 pcs
kg
70
110
132
198
330
363
506
660
748
880
946
kg
0.6
0.8
1.6
2.6
4.4
6.4
9.3
12.5
19.5
25
35
Carabine hooks
1
2
3
4
5
Carabine hooks
: AISI 316
: polished
8
9
diameter
length
R-7875
a
mm
4
5
6
7
8
9
10
11
12
13
14
b
mm
40
50
60
70
80
90
100
120
140
160
180
diameter
inside
thimble
c
mm
5
5
5
7
10
10
13
13
15
17
17
minimum
breaking
load
weight
per
100 pcs
kg
70
110
132
198
330
363
506
660
748
880
946
kg
0.8
1.6
2.6
4.4
6.4
9.3
12.5
19.5
25
35
50
10
11
12
13
14
15
16
141
Carabine hooks
with screw nut
Material
Finish
R-7876
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
142
: AISI 316
: polished
diameter
length
width
inside
width
inside
a
mm
4
5
6
7
8
9
10
11
12
13
14
b
mm
40
50
60
70
80
90
100
120
140
160
180
c
mm
5
7
7
9
11
11
12
14
16
20
20
d
mm
7
8
9
10
12
12
15
18
20
22
22
minimum
breaking
load
weight
per
100 pcs
kg
70
110
132
198
330
363
506
660
748
880
946
kg
0.8
1.6
2.6
4.4
6.4
9.3
12.5
19.5
25
35
50
standard type
Material
Finish
: AISI 316
: polished
R-7873
diameter
width
inside
length
inside
opening
a
mm
3.5
4
5
6
7
8
9
10
12
b
mm
10
12
13
14
16
17
17
20
23
c
mm
29
32
39
46
51
59
64
70
83
d
mm
5
5.5
6.5
7.5
8.5
10.5
11.5
12.5
14.5
minimum
breaking
load
weight
per
100 pcs
kg
155
450
585
790
1085
1380
1790
2085
2265
kg
0.9
1.3
2
3.3
5.3
7.5
10.3
13
22.5
Quick links
1
2
3
4
5
6
Quick links
with enlarged opening
Material
Finish
: AISI 316
: polished
9
10
R-7874
diameter
width
inside
length
inside
opening
a
mm
3.5
5
6
8
10
12
14
b
mm
10
14
16
18
20
23
27
c
mm
30
39
46
59
70
83
97
d
mm
10
14
16
18
20
23
26
minimum
breaking
load
weight
per
100 pcs
kg
155
585
790
1380
2085
2265
2540
kg
1.2
2.7
4.4
10.1
17.6
30.4
41.5
11
12
13
14
15
16
143
R-7880
: AISI 316
: generally to DIN 766
diameter
length
inside
width
outside
a
mm
3
4
5
6
8
10
b
mm
16
16
18.5
18.5
24
28
c
mm
11
14
17
20
26
34
minimum
breaking
load
kg
340
800
1250
1600
3200
5000
weight
per m
kg
0.17
0.32
0.5
0.75
1.35
2.25
1
2
3
4
5
Long link chain
: AISI 316
: generally to DIN 763
8
9
10
R-7890
11
12
13
14
15
16
144
diameter
length
inside
width
outside
a
mm
3
4
5
6
7
8
10
b
mm
26
32
36
42
48
54
66
c
mm
12
16
20
24
28
32
40
minimum
breaking
load
kg
340
800
1250
1600
2500
3200
5000
weight
per m
kg
0.14
0.27
0.43
0.63
0.86
1.1
1.75
Index by Chapter
146
Shackles
G-4161
Green Pin Standard Shackles - bow shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
G-4163
G-4151
Green Pin Standard Shackles - dee shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
G-4153
P-6036
Green Pin Heavy Duty Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
G-6038
Green Pin Heavy Duty Shackles - dee shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
P-6033
G-5263
G-5163
G-5153
G-4263
Green Pin Wide Mouth Towing Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
G-4164
Green Pin Trawling Shackles - bow shackles with square headed screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
G-4154
Green Pin Trawling Shackles - dee shackles with square headed screw pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
G-4169
Green Pin Sunken Hole Shackles - bow shackles with square sunken hole screw pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
G-4159
Green Pin Sunken Hole Shackles - dee shackles with square sunken hole screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
P-4170
S-1165
S-3557
Crown Shackles - dee shackles with round pin, for anchoring applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
S-3559
Crown Shackles - dee shackles with round pin, for anchoring applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
S-3461
Shackles generally to DIN 82016 type A - bow shackles with screw collar pin - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
G-3461
Shackles generally to DIN 82016 type A - bow shackles with screw collar pin - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . 32
S-3466
Shackles generally to DIN 82016 type B - bow shackles with safety bolt - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
G-3466
Shackles generally to DIN 82016 type B - bow shackles with safety bolt - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . 32
S-3351
Shackles generally to DIN 82101 type A - dee shackles with screw collar pin - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
G-3351
Shackles generally to DIN 82101 type A - dee shackles with screw collar pin - hot dipped galvanized. . . . . . . . . . . . . . . . . . . . . 33
S-3352
Shackles generally to DIN 82101 type B - dee shackles with counter sunk screw pin - selfcoloured . . . . . . . . . . . . . . . . . . . . . . 33
G-3352
Shackles generally to DIN 82101 type B - dee shackles with counter sunk screw pin - hot dipped galvanized . . . . . . . . . . . . . . 33
S-3356
Shackles generally to DIN 82101 type C - dee shackles with safety bolt - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
G-3356
Shackles generally to DIN 82101 type C - dee shackles with safety bolt - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . 34
G-3161
Chinese Yellow Pin Shackles - bow shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
G-3163
G-3151
Chinese Yellow Pin Shackles - dee shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
G-3153
S-2761
Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . 38
E-2761
Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - electro-galvanized . . . . . . . . . . . . . . . . . . . 38
G-2761
Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - hot dipped galvanized . . . . . . . . . . . . . . . . 38
S-2765
Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . 39
E-2765
Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - electro-galvanized . . . . . . . . . . . . . . . . . . . 39
G-2765
Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - hot dipped galvanized. . . . . . . . . . . . . . . . 39
S-2751
Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . 40
E-2751
Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - electro-galvanized. . . . . . . . . . . . . . . . . . . . 40
G-2751
Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - hot dipped galvanized . . . . . . . . . . . . . . . . 40
S-2755
Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . 41
E-2755
Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - electro-galvanized . . . . . . . . . . . . . . . . . . . 41
G-2755
Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - hot dipped galvanized . . . . . . . . . . . . . . . . 41
S-1161
E-1161
S-1164
S-1162
Commercial Shackles - bow shackles with counter sunk screw pin - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
E-1162
Commercial Shackles - bow shackles with counter sunk screw pin - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
S-1151
E-1151
S-1154
S-1152
Commercial Shackles - dee shackles with counter sunk screw pin - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
E-1152
Commercial Shackles - dee shackles with counter sunk screw pin - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
S-1170
Thimbles
E-6110
E-6120
E-6131
G-6132
G-6133
E-6135
G-6135
S-6134
G-6170
G-6142
Thimbles - generally to US Federal Specification FF-T-276b type III - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
G-6160
G-6151
E-6180
P-6190
E-6143
G-6143
G-6144
G-6240
E-6260
E-6220
Sleeves
A-6550
S-6500
Sockets
P-6411
G-6411
P-6412
G-6412
P-6413
G-6413
G-6416
S-6414
S-6415
Turnbuckles
G-6313
G-6311
G-6312
G-6315
G-6314
E-6351
E-6352
E-6354
E-6353
E-6355
G-6343
G-6340
G-6345
S-6330
Links
P-6860
P-6820
P-6840
P-6830
P-6850
Swivels
G-7713
G-7723
P-7710
P-7720
P-7730
P-7740
P-7750
P-7760
Hooks
P-6714C
P-6714A
P-6703C
P-6703A
P-6731
P-6706A
10
S-8140
E-8140
S-8142
E-8142
11
Loadbinders
P-7170
Green Pin ratchet type loadbinders - with hooks - according to EN12195-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
P-7190
Green Pin ratchet type loadbinders - without hooks - according to EN12195-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
P-7130
P-7150
P-7110
147
Index by Chapter
Index by Chapter
148
12
Chain
S-7660
Short link chain - generally to DIN 766, commercial quality - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
E-7661
Short link chain - generally to DIN 766, commercial quality - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
G-7662
Short link chain - generally to DIN 766, commercial quality - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
S-7630
Long link chain - generally to DIN 763, commercial quality - selfcoloured. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
E-7631
Long link chain - generally to DIN 763, commercial quality - electro-galvanized. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
G-7632
Long link chain - generally to DIN 763, commercial quality - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
13
P-6615
Green Pin plate lifting clamp, type E - for lifting and vertical transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
P-6616
Green Pin plate lifting clamp, type ES - for lifting and vertical transportation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
P-6625
Green Pin plate lifting clamp, type EU - for lifting and transportation in all directions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
P-6626
Green Pin plate lifting clamp, type EUS - for lifting and transportation in all directions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
P-6635
Green Pin plate lifting clamp, type EH - for lifting and horizontal transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
P-6636
Green Pin plate lifting clamp, type EHS - for lifting and horizontal transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
P-6685
Green Pin lifting clamp, type ESV - for lifting and transportation of steel beams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
P-6651
Green Pin plate lifting clamp spare part - lifting eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
P-6652
Green Pin plate lifting clamp spare part - lock lever assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
S-6653
Green Pin plate lifting clamp spare part - lock spring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
P-6654
Green Pin plate lifting clamp spare part - cam assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
S-6655
Green Pin plate lifting clamp spare part - cam pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
S-6656
S-6657
Green Pin plate lifting clamp spare part - eye pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
P-6658
Green Pin plate lifting clamp spare part - universal eye component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
14
Blocks
P-6951
P-6952
P-6953
E-6917
E-6918
E-6922
E-6923
E-6927
E-6928
E-6943
Galvanized malleable iron snatch blocks - with eye, one sheave. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
E-6944
Galvanized malleable iron snatch blocks - with hook, one sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
P-6916
15
General Hardware
E-7200
E-7210
E-7220
E-7230
E-7300
E-7310
E-7910
E-7920
E-7930
E-7931
E-7940
16
R-7825
R-7821
R-7829
R-7822
R-7860
R-7863
R-7837
R-7838
R-7839
R-7830
R-7834
R-7835
R-7836
R-7877
R-7840
R-7842
R-7872
R-7875
R-7876
R-7873
R-7874
R-7880
R-7890
Index by Chapter
149
Index by Productname
A
Aluminium sleeves - for wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6550 . . . . . . . . . . . . . . . . . . . . 63
American pattern cargo blocks - with eye, one sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6916 . . . . . . . . . . . . . . . . . . . 123
C
Carabine hooks - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-7200 . . . . . . . . . . . . . . . . . . . 125
Carabine hooks - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7872 . . . . . . . . . . . . . . . . . . . 141
Carabine hooks - with pressed thimble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-7210 . . . . . . . . . . . . . . . . . . . 125
Carabine hooks - with pressed thimble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7875 . . . . . . . . . . . . . . . . . . . 141
Carabine hooks - with pressed thimble and screw nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-7230 . . . . . . . . . . . . . . . . . . . 126
Carabine hooks - with screw nut. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-7220 . . . . . . . . . . . . . . . . . . . 126
Carabine hooks - with screw nut. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7876 . . . . . . . . . . . . . . . . . . . 142
Chain repair links - commercial quality. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-7910 . . . . . . . . . . . . . . . . . . . 128
Chinese Yellow Pin Shackles - bow shackles with safety pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-3163
. . . . . . . . . . . . . . . . . . 36
Chinese Yellow Pin Shackles - bow shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-3161
. . . . . . . . . . . . . . . . . . 36
Chinese Yellow Pin Shackles - dee shackles with safety pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-3153 . . . . . . . . . . . . . . . . . . . . 37
Chinese Yellow Pin Shackles - dee shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-3151
. . . . . . . . . . . . . . . . . . 37
Closed body rigging screws Eye - Eye - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6340 . . . . . . . . . . . . . . . . . . . . 84
Closed body rigging screws Eye - Jaw - hot dipped galvanized. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6345 . . . . . . . . . . . . . . . . . . . . 84
Closed body rigging screws Jaw - Jaw - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6343 . . . . . . . . . . . . . . . . . . . . 83
Closed body rigging screws Jaw - Jaw - stainless steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7830 . . . . . . . . . . . . . . . . . . . 137
Commercial Shackles - bow shackles with counter sunk screw pin - electro-galvanized . . . . . . . . . . . . . . . . . . . E-1162 . . . . . . . . . . . . . . . . . . . . 43
Commercial Shackles - bow shackles with counter sunk screw pin - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . S-1162 . . . . . . . . . . . . . . . . . . . . 43
Commercial Shackles - bow shackles with screw collar pin - electro-galvanized. . . . . . . . . . . . . . . . . . . . . . . . . . E-1161 . . . . . . . . . . . . . . . . . . . . 42
Commercial Shackles - bow shackles with screw collar pin - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-1161 . . . . . . . . . . . . . . . . . . . . 42
Commercial Shackles - bow shackles with square head screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-1164 . . . . . . . . . . . . . . . . . . . . 42
Commercial Shackles - danlino V shackles with square head screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-1170 . . . . . . . . . . . . . . . . . . . . 45
Commercial Shackles - dee shackles with counter sunk screw pin - electro-galvanized. . . . . . . . . . . . . . . . . . . . E-1152 . . . . . . . . . . . . . . . . . . . . 44
Commercial Shackles - dee shackles with counter sunk screw pin - selfcoloured. . . . . . . . . . . . . . . . . . . . . . . . . S-1152 . . . . . . . . . . . . . . . . . . . . 44
Commercial Shackles - dee shackles with screw collar pin - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . E-1151 . . . . . . . . . . . . . . . . . . . . 43
Commercial Shackles - dee shackles with screw collar pin - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-1151 . . . . . . . . . . . . . . . . . . . . 43
Commercial Shackles - dee shackles with square head screw pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-1154 . . . . . . . . . . . . . . . . . . . . 44
Crown Shackles - dee shackles with round pin, for anchoring applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-3559 . . . . . . . . . . . . . . . . . . . . 31
Crown Shackles - dee shackles with round pin, for anchoring applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-3557 . . . . . . . . . . . . . . . . . . . . 30
E
Eye bolts - generally to DIN 580 - stainless steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7840 . . . . . . . . . . . . . . . . . . . 140
Eye nuts - generally to DIN 582 - stainless steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7842 . . . . . . . . . . . . . . . . . . . 140
Eye terminals - swage type - stainless steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7835 . . . . . . . . . . . . . . . . . . . 138
F
Fork terminals - swage type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7834 . . . . . . . . . . . . . . . . . . . 138
G
Galvanized malleable iron blocks - with eye, one sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6917 . . . . . . . . . . . . . . . . . . . 119
Galvanized malleable iron blocks - with eye, three sheaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6927 . . . . . . . . . . . . . . . . . . . 121
Galvanized malleable iron blocks - with eye, two sheaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6922 . . . . . . . . . . . . . . . . . . . 120
Galvanized malleable iron blocks - with hook, one sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6918 . . . . . . . . . . . . . . . . . . . 119
Galvanized malleable iron blocks - with hook, three sheaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6928 . . . . . . . . . . . . . . . . . . . 121
Galvanized malleable iron blocks - with hook, two sheaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6923 . . . . . . . . . . . . . . . . . . . 120
Galvanized malleable iron snatch blocks - with eye, one sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6943 . . . . . . . . . . . . . . . . . . . 122
Galvanized malleable iron snatch blocks - with hook, one sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6944 . . . . . . . . . . . . . . . . . . . 122
Gold Nose sockets - closed spelter socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6416 . . . . . . . . . . . . . . . . . . . . 71
Green Pin connecting links - for connecting grade 80 chain-slings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6860 . . . . . . . . . . . . . . . . . . . . 87
Green Pin eye bolts - generally to DIN 580 - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-8140 . . . . . . . . . . . . . . . . . . . 101
Green Pin eye bolts - generally to DIN 580 - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-8140 . . . . . . . . . . . . . . . . . . . 101
Green Pin eye nuts - generally to DIN 582 - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-8142 . . . . . . . . . . . . . . . . . . . 101
Green Pin eye nuts - generally to DIN 582 - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-8142 . . . . . . . . . . . . . . . . . . . 101
Green Pin Heavy Duty Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6036 . . . . . . . . . . . . . . . . . . . . 18
Green Pin Heavy Duty Shackles - dee shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6038 . . . . . . . . . . . . . . . . . . . 19
Green Pin large eye hooks, grade 4 - with safety latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6714C . . . . . . . . . . . . . . . . . . . 97
Green Pin large eye hooks, grade 8 - with safety latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6714A . . . . . . . . . . . . . . . . . . . 97
Green Pin lever type loadbinders - with hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-7110 . . . . . . . . . . . . . . . . . . . 105
Green Pin lifting clamp, type ESV - for lifting and transportation of steel beams . . . . . . . . . . . . . . . . . . . . . . . . . P-6685 . . . . . . . . . . . . . . . . . . . 113
Green Pin master link assemblies - for connecting grade 80 chain-slings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6840 . . . . . . . . . . . . . . . . . . . . 88
Green Pin master link assemblies - with flat part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6850 . . . . . . . . . . . . . . . . . . . . 89
Green Pin master links - for connecting grade 80 chain-slings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6820 . . . . . . . . . . . . . . . . . . . . 87
Green Pin master links - with flat part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6830 . . . . . . . . . . . . . . . . . . . . 88
Green Pin pipe line hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6731 . . . . . . . . . . . . . . . . . . . . 99
Green Pin plate lifting clamp spare part - cam assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6654 . . . . . . . . . . . . . . . . . . . 113
Green Pin plate lifting clamp spare part - cam pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-6655 . . . . . . . . . . . . . . . . . . . 113
Green Pin plate lifting clamp spare part - eye pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-6657 . . . . . . . . . . . . . . . . . . . 113
Green Pin plate lifting clamp spare part - lifting eye. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6651 . . . . . . . . . . . . . . . . . . . 113
Green Pin plate lifting clamp spare part - lock lever assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6652 . . . . . . . . . . . . . . . . . . . 113
Green Pin plate lifting clamp spare part - lock spring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-6653 . . . . . . . . . . . . . . . . . . . 113
Green Pin plate lifting clamp spare part - pivot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-6656 . . . . . . . . . . . . . . . . . . . 113
150
Green Pin plate lifting clamp, type E - for lifting and vertical transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6615 . . . . . . . . . . . . . . . . . . . 110
Green Pin plate lifting clamp, type EH - for lifting and horizontal transportation. . . . . . . . . . . . . . . . . . . . . . . . . . P-6635 . . . . . . . . . . . . . . . . . . . 112
Green Pin plate lifting clamp, type EHS - for lifting and horizontal transportation . . . . . . . . . . . . . . . . . . . . . . . . P-6636 . . . . . . . . . . . . . . . . . . . 112
Green Pin plate lifting clamp, type ES - for lifting and vertical transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6616 . . . . . . . . . . . . . . . . . . . 110
Green Pin plate lifting clamp, type EU - for lifting and transportation in all directions . . . . . . . . . . . . . . . . . . . . . P-6625 . . . . . . . . . . . . . . . . . . . 111
Green Pin plate lifting clamp, type EUS - for lifting and transportation in all directions . . . . . . . . . . . . . . . . . . . . P-6626 . . . . . . . . . . . . . . . . . . . 111
Green Pin Polar Shackles - bow shackles with safety bolt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-5163
. . . . . . . . . . . . . . . . . . 22
Green Pin Polar Shackles - dee shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-5153
. . . . . . . . . . . . . . . . . . 23
. . . . . . . . . . . . . . . . . . 14
Green Pin Standard Shackles - dee shackles with safety bolt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-4153 . . . . . . . . . . . . . . . . . . . 17
Green Pin Standard Shackles - dee shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-4151 . . . . . . . . . . . . . . . . . . . 16
Green Pin Sunken Hole Shackles - bow shackles with square sunken hole screw pin . . . . . . . . . . . . . . . . . . . . G-4169
. . . . . . . . . . . . . . . . . . 28
Green Pin Sunken Hole Shackles - dee shackles with square sunken hole screw pin . . . . . . . . . . . . . . . . . . . . G-4159
. . . . . . . . . . . . . . . . . . 29
Green Pin Super Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-5263 . . . . . . . . . . . . . . . . . . . . 21
Green Pin Swage sockets - closed type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-6415 . . . . . . . . . . . . . . . . . . . . 73
Green Pin Swage sockets - open type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-6414 . . . . . . . . . . . . . . . . . . . . 72
Green Pin swivel hooks, grade 4 - with safety latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6703C . . . . . . . . . . . . . . . . . . . 98
Green Pin swivel hooks, grade 8 - with safety latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6703A . . . . . . . . . . . . . . . . . . . 98
Green Pin swivels Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-7713 . . . . . . . . . . . . . . . . . . . . 91
Green Pin swivels Jaw - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-7723 . . . . . . . . . . . . . . . . . . . . 91
Green Pin Trawling Shackles - bow shackles with square headed screw pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . G-4164
. . . . . . . . . . . . . . . . . . 26
Green Pin Trawling Shackles - dee shackles with square headed screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-4154
. . . . . . . . . . . . . . . . . . 27
K
Key for Green Pin Sunken Hole Shackles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-4170 . . . . . . . . . . . . . . . . . . . . 29
L
Linch pins - with round spring ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-7940 . . . . . . . . . . . . . . . . . . . 130
Long link chain - generally to DIN 763 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7890 . . . . . . . . . . . . . . . . . . . 144
Long link chain - generally to DIN 763, commercial quality - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . E-7631 . . . . . . . . . . . . . . . . . . . 107
Long link chain - generally to DIN 763, commercial quality - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . G-7632 . . . . . . . . . . . . . . . . . . . 107
Long link chain - generally to DIN 763, commercial quality - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-7630 . . . . . . . . . . . . . . . . . . . 107
M
Mooring Shackles - bow shackles with screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-1165 . . . . . . . . . . . . . . . . . . . . 30
O
Open body rigging screws Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7839 . . . . . . . . . . . . . . . . . . . 137
Open body rigging screws Hook - Eye. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7838 . . . . . . . . . . . . . . . . . . . 136
Open body rigging screws Hook - Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7837 . . . . . . . . . . . . . . . . . . . 136
P
Prescon sleeves - for wire rope. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-6500 . . . . . . . . . . . . . . . . . . . . 64
Q
Quick links - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-7300 . . . . . . . . . . . . . . . . . . . 127
Quick links - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7873 . . . . . . . . . . . . . . . . . . . 142
Quick links - with enlarged opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-7310 . . . . . . . . . . . . . . . . . . . 127
Quick links - with enlarged opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7874 . . . . . . . . . . . . . . . . . . . 143
151
Index by Productname
Green Pin plate lifting clamp spare part - universal eye component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6658 . . . . . . . . . . . . . . . . . . . 113
Index by Productname
R
Rigging screws Eye - Eye - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6351 . . . . . . . . . . . . . . . . . . . . 81
Rigging screws Eye - Hook - according to DIN 1480. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6354 . . . . . . . . . . . . . . . . . . . . 82
Rigging screws Hook - Hook - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6352 . . . . . . . . . . . . . . . . . . . . 81
Rigging screws Jaw - Jaw - according to DIN 1480. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6353 . . . . . . . . . . . . . . . . . . . . 82
Rigging screws with Welding Ends - according to DIN 1480. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6355 . . . . . . . . . . . . . . . . . . . . 83
Round thimbles - container type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6144 . . . . . . . . . . . . . . . . . . . . 55
Round thimbles - ordinary type - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6143 . . . . . . . . . . . . . . . . . . . . 55
Round thimbles - ordinary type - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6143 . . . . . . . . . . . . . . . . . . . . 55
S
Shackles - bow shackle with screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7825 . . . . . . . . . . . . . . . . . . . 133
Shackles - dee shackle with screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7821 . . . . . . . . . . . . . . . . . . . 133
Shackles - long dee type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7829 . . . . . . . . . . . . . . . . . . . 134
Shackles - short twisted type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7822 . . . . . . . . . . . . . . . . . . . 134
Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - electro-galvanized . . . . . . . E-2755 . . . . . . . . . . . . . . . . . . . . 41
Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - hot dipped galvanized . . . G-2755 . . . . . . . . . . . . . . . . . . . . 41
Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - selfcoloured. . . . . . . . . . . . S-2755 . . . . . . . . . . . . . . . . . . . . 41
Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - electro-galvanized . . . . . . . E-2751 . . . . . . . . . . . . . . . . . . . . 40
Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - hot dipped galvanized. . . . G-2751 . . . . . . . . . . . . . . . . . . . . 40
Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - selfcoloured . . . . . . . . . . . . S-2751 . . . . . . . . . . . . . . . . . . . . 40
Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - electro-galvanized. . . . . . . E-2761 . . . . . . . . . . . . . . . . . . . . 38
Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - hot dipped galvanized . . . G-2761 . . . . . . . . . . . . . . . . . . . . 38
Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - selfcoloured . . . . . . . . . . . S-2761 . . . . . . . . . . . . . . . . . . . . 38
Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - electro-galvanized . . . . . . E-2765 . . . . . . . . . . . . . . . . . . . . 39
Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - hot dipped galvanized . . . G-2765 . . . . . . . . . . . . . . . . . . . . 39
Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - selfcoloured . . . . . . . . . . . S-2765 . . . . . . . . . . . . . . . . . . . . 39
Shackles generally to DIN 82016 type A - bow shackles with screw collar pin - hot dipped galvanized . . . . . . . G-3461 . . . . . . . . . . . . . . . . . . . . 32
Shackles generally to DIN 82016 type A - bow shackles with screw collar pin - selfcoloured . . . . . . . . . . . . . . . . S-3461 . . . . . . . . . . . . . . . . . . . . 32
Shackles generally to DIN 82016 type B - bow shackles with safety bolt - hot dipped galvanized . . . . . . . . . . . . G-3466 . . . . . . . . . . . . . . . . . . . . 32
Shackles generally to DIN 82016 type B - bow shackles with safety bolt - selfcoloured . . . . . . . . . . . . . . . . . . . . S-3466 . . . . . . . . . . . . . . . . . . . . 32
Shackles generally to DIN 82101 type A - dee shackles with screw collar pin - hot dipped galvanized . . . . . . . . G-3351 . . . . . . . . . . . . . . . . . . . . 33
Shackles generally to DIN 82101 type A - dee shackles with screw collar pin - selfcoloured . . . . . . . . . . . . . . . . S-3351 . . . . . . . . . . . . . . . . . . . . 33
Shackles generally to DIN 82101 type B - dee shackles with counter sunk screw pin - hot dipped galvanized. . G-3352 . . . . . . . . . . . . . . . . . . . . 33
Shackles generally to DIN 82101 type B - dee shackles with counter sunk screw pin - selfcoloured . . . . . . . . . . S-3352 . . . . . . . . . . . . . . . . . . . . 33
Shackles generally to DIN 82101 type C - dee shackles with safety bolt - hot dipped galvanized . . . . . . . . . . . . G-3356 . . . . . . . . . . . . . . . . . . . . 34
Shackles generally to DIN 82101 type C - dee shackles with safety bolt - selfcoloured . . . . . . . . . . . . . . . . . . . . S-3356 . . . . . . . . . . . . . . . . . . . . 34
S-hooks - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-7920 . . . . . . . . . . . . . . . . . . . 128
Short link chain - generally to DIN 766 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7880 . . . . . . . . . . . . . . . . . . . 144
Short link chain - generally to DIN 766, commercial quality - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . E-7661 . . . . . . . . . . . . . . . . . . . 107
Short link chain - generally to DIN 766, commercial quality - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . G-7662 . . . . . . . . . . . . . . . . . . . 107
Short link chain - generally to DIN 766, commercial quality - selfcoloured. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-7660 . . . . . . . . . . . . . . . . . . . 107
Snatch block - type 601T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6953 . . . . . . . . . . . . . . . . . . . 118
Snatch blocks - type 601H, with hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6952 . . . . . . . . . . . . . . . . . . . 118
Snatch blocks - type 601S, with shackle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6951 . . . . . . . . . . . . . . . . . . . 117
Spring pins - double type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-7931 . . . . . . . . . . . . . . . . . . . 129
Spring pins - single type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-7930 . . . . . . . . . . . . . . . . . . . 129
Swivels Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7877 . . . . . . . . . . . . . . . . . . . 139
T
Thimbles - for rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6180 . . . . . . . . . . . . . . . . . . . . 54
Thimbles - generally to BS 464 - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6170 . . . . . . . . . . . . . . . . . . . . 52
Thimbles - generally to DIN 3090 - electro-galvanized. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6135 . . . . . . . . . . . . . . . . . . . . 50
Thimbles - generally to DIN 3090 - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6135 . . . . . . . . . . . . . . . . . . . . 50
Thimbles - generally to DIN 3091 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-6134 . . . . . . . . . . . . . . . . . . . . 51
Thimbles - generally to DIN 6899 (B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6131 . . . . . . . . . . . . . . . . . . . . 48
Thimbles - generally to DIN 6899 (C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6132 . . . . . . . . . . . . . . . . . . . . 49
Thimbles - generally to DIN 83311 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6133 . . . . . . . . . . . . . . . . . . . . 49
Thimbles - generally to US Federal Specification FF-T-276b type III - hot dipped galvanized . . . . . . . . . . . . . . . . G-6142 . . . . . . . . . . . . . . . . . . . . 52
Thimbles - heavy duty stub-end . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6120 . . . . . . . . . . . . . . . . . . . . 47
Thimbles - heavy type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7860 . . . . . . . . . . . . . . . . . . . 135
Thimbles - pennant line type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6151 . . . . . . . . . . . . . . . . . . . . 53
Thimbles - standard commercial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6110 . . . . . . . . . . . . . . . . . . . . 47
Thimbles - towing type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6160 . . . . . . . . . . . . . . . . . . . . 53
Thimbles - tubular type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-6190 . . . . . . . . . . . . . . . . . . . . 54
Threaded terminals - swage type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R-7836 . . . . . . . . . . . . . . . . . . . 139
Thrust bearing swivels Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-7740 . . . . . . . . . . . . . . . . . . . . 93
Thrust bearing swivels Eye - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-7730 . . . . . . . . . . . . . . . . . . . . 93
Thrust bearing swivels Hook - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-7760 . . . . . . . . . . . . . . . . . . . . 94
Thrust bearing swivels Hook - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-7750 . . . . . . . . . . . . . . . . . . . . 94
Thrust bearing swivels Jaw - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-7720 . . . . . . . . . . . . . . . . . . . . 92
Thrust bearing swivels Jaw - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-7710 . . . . . . . . . . . . . . . . . . . . 92
Turnbuckles (hamburgers) - for deck lashing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-6330 . . . . . . . . . . . . . . . . . . . . 85
152
153
Index by Productname
Index by Productnumber
A
A-6550
E
E-1151
E-1152
Commercial Shackles - dee shackles with counter sunk screw pin - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
E-1161
E-1162
Commercial Shackles - bow shackles with counter sunk screw pin - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
E-2751
Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - electro-galvanized. . . . . . . . . . . . . . . . . . . . 40
E-2755
Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - electro-galvanized . . . . . . . . . . . . . . . . . . . 41
E-2761
Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - electro-galvanized . . . . . . . . . . . . . . . . . . . 38
E-2765
Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - electro-galvanized . . . . . . . . . . . . . . . . . . . 39
E-6110
E-6120
E-6131
E-6135
E-6143
E-6180
E-6220
E-6260
E-6351
E-6352
E-6353
E-6354
E-6355
E-6917
E-6918
E-6922
E-6923
E-6927
E-6928
E-6943
Galvanized malleable iron snatch blocks - with eye, one sheave. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
E-6944
Galvanized malleable iron snatch blocks - with hook, one sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
E-7200
E-7210
E-7220
E-7230
E-7300
E-7310
E-7631
Long link chain - generally to DIN 763, commercial quality - electro-galvanized. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
E-7661
Short link chain - generally to DIN 766, commercial quality - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
E-7910
E-7920
E-7930
E-7931
E-7940
E-8140
E-8142
154
G-2751
Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - hot dipped galvanized . . . . . . . . . . . . . . . . 40
G-2755
Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - hot dipped galvanized . . . . . . . . . . . . . . . . 41
G-2761
Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - hot dipped galvanized . . . . . . . . . . . . . . . . 38
G-2765
Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - hot dipped galvanized. . . . . . . . . . . . . . . . 39
G-3151
Chinese Yellow Pin Shackles - dee shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
G-3153
G-3161
Chinese Yellow Pin Shackles - bow shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
G-3163
G-3351
Shackles generally to DIN 82101 type A - dee shackles with screw collar pin - hot dipped galvanized. . . . . . . . . . . . . . . . . . . . . 33
G-3352
Shackles generally to DIN 82101 type B - dee shackles with counter sunk screw pin - hot dipped galvanized . . . . . . . . . . . . . . 33
G-3356
Shackles generally to DIN 82101 type C - dee shackles with safety bolt - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . 34
G-3461
Shackles generally to DIN 82016 type A - bow shackles with screw collar pin - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . 32
G-3466
Shackles generally to DIN 82016 type B - bow shackles with safety bolt - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . 32
G-4151
Green Pin Standard Shackles - dee shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
G-4153
G-4154
Green Pin Trawling Shackles - dee shackles with square headed screw pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
G-4159
Green Pin Sunken Hole Shackles - dee shackles with square sunken hole screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
G-4161
Green Pin Standard Shackles - bow shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
G-4163
G-4164
Green Pin Trawling Shackles - bow shackles with square headed screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
G-4169
Green Pin Sunken Hole Shackles - bow shackles with square sunken hole screw pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
G-4263
Green Pin Wide Mouth Towing Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
G-5153
G-5163
G-5263
G-6038
Green Pin Heavy Duty Shackles - dee shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
G-6133
G-6135
G-6142
Thimbles - generally to US Federal Specification FF-T-276b type III - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
G-6143
G-6144
G-6151
G-6160
G-6170
G-6240
G-6311
G-6312
G-6313
G-6314
G-6315
G-6340
G-6343
G-6345
G-6411
G-6412
G-6413
G-6416
G-7632
Long link chain - generally to DIN 763, commercial quality - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
G-7662
Short link chain - generally to DIN 766, commercial quality - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
G-7713
G-7723
P
P-4170
P-6033
P-6036
Green Pin Heavy Duty Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
P-6190
P-6411
P-6412
P-6413
P-6615
Green Pin plate lifting clamp, type E - for lifting and vertical transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
P-6616
Green Pin plate lifting clamp, type ES - for lifting and vertical transportation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
P-6625
Green Pin plate lifting clamp, type EU - for lifting and transportation in all directions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
P-6626
Green Pin plate lifting clamp, type EUS - for lifting and transportation in all directions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
P-6635
Green Pin plate lifting clamp, type EH - for lifting and horizontal transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
P-6636
Green Pin plate lifting clamp, type EHS - for lifting and horizontal transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
P-6651
Green Pin plate lifting clamp spare part - lifting eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
P-6652
Green Pin plate lifting clamp spare part - lock lever assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
P-6654
Green Pin plate lifting clamp spare part - cam assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
P-6658
Green Pin plate lifting clamp spare part - universal eye component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
P-6685
Green Pin lifting clamp, type ESV - for lifting and transportation of steel beams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
P-6703A
P-6703C
P-6706A
P-6714A
P-6714C
P-6731
P-6820
P-6830
P-6840
P-6850
P-6860
P-6916
P-6951
P-6952
P-6953
P-7110
P-7130
P-7150
P-7170
Green Pin ratchet type loadbinders - with hooks - according to EN12195-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
P-7190
Green Pin ratchet type loadbinders - without hooks - according to EN12195-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
P-7710
P-7720
P-7730
P-7740
P-7750
P-7760
155
Index by Productnumber
G-6132
Index by Productnumber
R
R-7821
R-7822
R-7825
R-7829
R-7830
R-7834
R-7835
R-7836
R-7837
R-7838
R-7839
R-7840
R-7842
R-7860
R-7863
R-7872
R-7873
R-7874
R-7875
R-7876
R-7877
R-7880
R-7890
156
S-1151
S-1152
Commercial Shackles - dee shackles with counter sunk screw pin - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
S-1154
S-1161
S-1162
Commercial Shackles - bow shackles with counter sunk screw pin - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
S-1164
S-1165
S-1170
S-2751
Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . 40
S-2755
Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . 41
S-2761
Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . 38
S-2765
Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . 39
S-3351
Shackles generally to DIN 82101 type A - dee shackles with screw collar pin - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
S-3352
Shackles generally to DIN 82101 type B - dee shackles with counter sunk screw pin - selfcoloured . . . . . . . . . . . . . . . . . . . . . . 33
S-3356
Shackles generally to DIN 82101 type C - dee shackles with safety bolt - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
S-3461
Shackles generally to DIN 82016 type A - bow shackles with screw collar pin - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
S-3466
Shackles generally to DIN 82016 type B - bow shackles with safety bolt - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
S-3557
Crown Shackles - dee shackles with round pin, for anchoring applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
S-3559
Crown Shackles - dee shackles with round pin, for anchoring applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
S-6134
S-6330
S-6414
S-6415
S-6500
S-6653
Green Pin plate lifting clamp spare part - lock spring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
S-6655
Green Pin plate lifting clamp spare part - cam pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
S-6656
S-6657
Green Pin plate lifting clamp spare part - eye pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
S-7630
Long link chain - generally to DIN 763, commercial quality - selfcoloured. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
S-7660
Short link chain - generally to DIN 766, commercial quality - selfcoloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
S-8140
S-8142
Index by Productnumber
157
General conditions
Article 1.
General
These General Conditions are applicable to all Van Beests agreements with third parties. The clients
trading conditions shall not be accepted by Van Beest.
Article 2.
Offers
2.1.
Quotations made by or on behalf of Van Beest are without obligation, and are based on data, drawings
and suchlike provided by the client, if requested.
2.2.
The prices stated by Van Beest are based on the price determining factors valid at the time the quotation
is made, including government levies and total wages, calculated according to the usual working times
adhered to at Van Beest. Should one or more of these cost price factors change after the offer has been
made - including change as a result of exchange rate fluctuations of foreign currency - even if this is a
result of foreseeable circumstances, Van Beest is entitled to modify the price quoted accordingly.
Article 3.
Agreements
3.1.
Orders accepted by agents, representatives, travelling sales staff and intermediaries shall only become
legal once they have been confirmed in writing by Van Beest.
3.2.
Drawings, calculations, plans, systems, stamps and moulds, methods and other data shall remain the
property of Van Beest and may not be made known to third parties by the client without prior written
permission from Van Beest.
3.3.
Price increases caused by production activities being delayed and/or made more difficult outside the
responsibility of Van Beest or due to government regulations coming into force, shall be at the expense
of the client.
3.4.
The client is entitled to suggest modifications to the goods to be delivered after the conclusion of the
agreement. However these will only be carried out if Van Beest judges that the production process so
allows and if the client has made a written statement to the effect that he is prepared to pay all extra costs
associated therewith.
Article 4.
Prices and Payment
4.1.
Prices quoted by Van Beest in catalogues, price lists and suchlike are without obligation and may be
modified without prior notification. Prices do not include turnover tax.
4.2.
Payment shall take place within 30 days of the invoice date, unless agreed otherwise. Claims to a reduction or settlement are not permitted. Costs relating to payments via banks, exchange rate conversion,
credit costs and suchlike shall be at the expense of the client.
4.3.
In the event of late payment the client shall be obliged to pay interest at 1% per month from the due date
of the invoice, while Van Beest shall be entitled to suspend the fulfilment of its obligations by the amount
of time by which the payment has been delayed. Once Van Beest has passed on its claim to payment to
third parties, the client shall become liable to pay extrajudicial costs of 15% over and above the amount
due, including interest, without prejudice to the costs which the client must settle.
Article 5.
Delivery
5.1.
The delivery time shall commence on the latest of the following dates:
a. the day of signing of Van Beests written order confirmation;
b. the date of receipt of the instalment required by the order;
c. the date of receipt of the technical data, documents and/or securities to be provided by the client
to Van Beest.
5.2.
Exceeding the delivery date shall not entitle the client to compensation nor shall it constitute a reason for
him to demand cancellation of the agreement or to suspend fulfilment of his own obligations.
5.3.
In the case of mass production by Van Beest or its suppliers, of products which differ from the standard
products in the production range, Van Beest is entitled to maintain a margin on delivery of 5% above or
below the number of products ordered.
Article 6.
Risk and Reservation of Title
6.1.
The risk with regard to damage, theft, loss and suchlike of the products sold shall be transferred to the
buyer at the moment the sales agreement is concluded if specific products are concerned and, in the
case of standard products, at the moment Van Beest reserves these for the client.
6.2.
The ownership of the products manufactured by Van Beest and delivered to the client shall be transferred
to the client as soon as he has paid everything which he owes as a result of the agreement concluded
with regard to these matters, to Van Beest, or has provided satisfactory security for the fulfilment of his
obligations. As long as this is not the case, Van Beest shall remain entitled to take the products it has
delivered back. All costs connected therewith shall be at the expense of the client. The client shall not
be entitled to deliver products which have not been paid for to third parties, unless this is necessary for
its normal business operations.
Article 7.
Security
7.1.
Notwithstanding the agreed conditions of payment, Van Beest is entitled at all times to demand security
from the client for the fulfilment of his obligations before commencing delivery or before continuing with
a delivery that has already been commenced.
158
Article 9.
Non-attributable Failure
9.1
If non-fulfilment of any agreement on the part of Van Beest is not due to its own fault and is a result of circumstances foreseeable or otherwise which cannot be attributed to it, such as war or a similar situation,
mobilisation, revolt, strike, sit-in or picketing, boycott, loss of public utilities, government measures or
failure of suppliers, the consequences thereof shall not be attributed to Van Beest. In such a case parties
shall consult in order to come to a possible adjustment of the agreement. If no consensus is reached and
the agreement has become impossible to carry out, the agreement may be cancelled by either party.
Article 10.
Liability for Loss and Damage
10.1. Van Beest is bound to compensate loss and damage suffered by the client if the client can prove that
the loss and damage is a result of a defect in a product supplied by Van Beest. Capital loss such as
reduced profit, reduced income, costs in connection with delay in or standstill of production or any other
consequential loss shall under no circumstances be eligible for compensation.
10.2. Damage to goods belonging to the client and injury shall be compensated to a maximum of the amount
for which Van Beest is insured.
10.3
The client indemnifies Van Beest against all claims from third parties in connection with products supplied to the client by Van Beest, in so far as this compensation is not by force of an agreement at the
expense of Van Beest.
10.4. Van Beest accepts no liability whatsoever for advice it provides without express agreement.
10.5. All claims to compensation shall lapse after one year, to be calculated from the invoice date.
Article 11.
Cancellation
11.1. If the client wishes to cancel an agreement, listing reasons, he is obliged to take up all goods ordered
and/or wholly or partially processed by Van Beest, and also to pay Van Beest a compensation of 15% of
the amount of the order, plus any capital loss on the part of Van Beest.
Article 12.
Tax
12.1. Tax and levies imposed on Van Beest on export, including import levies, shall be at the expense of the
client.
Article 13.
Industrial Property Rights
13.1. The client indemnifies Van Beest against all claims from third parties arising from alleged violation of the
intellectual property rights due to it.
13.2. The client is not entitled except with written permission from Van Beest to use the trade name or designation Green Pin for its own trading activities or to associate it with any products other than Green
Pin products. Furthermore the client shall inform Van Beest immediately with regard to any violation by
third parties of this trade name or brand.
Article 14.
Liquidation
14.1. If the client is declared bankrupt, if an attachment is levied on its goods, if a suspension of payment is
requested or if it fails to fulfil any obligation to Van Beest, Van Beest is entitled, by means of a written
statement, to cancel any agreement not implemented or not fully implemented, concluded with the
client.
Article 15.
Applicable Law and Disputes
15.1. All agreements with Van Beest are governed exclusively by Dutch law. The stipulations of the Vienna
Sales Treaty (CISG) are expressly excluded.
15.2. Disputes arising from any agreement concluded with Van Beest shall be submitted to the judgement of
the District Court of Dordrecht, subject to Van Beests right to summons the client before the competent
court according to Dutch law.
159
General conditions
Article 8.
Guarantee and Complaints
8.1.
Van Beest guarantees that the products it sells and delivers meet the specifications valid for these products as stated in the Van Beest catalogue. Only the specifications expressly agreed in writing shall be
valid for products not included in the Van Beest catalogue. The guarantee shall never be valid for longer
than three months from the date of delivery to the client.
8.2.
Defects caused by normal wear and tear, inappropriate and/or improper use, or insufficient maintenance,
shall under no circumstances fall under any guarantee.
8.3.
Van Beest shall deliver the following testcertificates for an extra fee:
dock regulation certificate;
Bureau Veritas, R.I.N.A., Germanischer Lloyd, A.I.B.-Vinotte, H.A.I. and Lloyds Register
of Shipping;
8.4.
The client is bound to inspect the goods delivered - or have them inspected - immediately on arrival.
Complaints regarding quality or quantity, or other deviations and/or damage shall be submitted by the
client within 14 days of receipt of the goods, in writing - by post, telex or fax - to Van Beest in detail.
Complaints shall under no circumstances be accepted if the client has processed the products delivered
or has delivered them on to third parties.
8.5.
If Van Beest considers a complaint to be founded, it is only bound to replace the defective products free
of charge and under no circumstances to compensation for consequential loss or damage suffered by
the client, under whatever name.
160
Notes