0 penilaian0% menganggap dokumen ini bermanfaat (0 suara)
29 tayangan1 halaman
Air Motor Diaphragm is specifically designed for the Fabric Reinforcement to be against the Piston. This provides for greater flexibility and strength, so long as the Diaphram is installed correctly.
Air Motor Diaphragm is specifically designed for the Fabric Reinforcement to be against the Piston. This provides for greater flexibility and strength, so long as the Diaphram is installed correctly.
Air Motor Diaphragm is specifically designed for the Fabric Reinforcement to be against the Piston. This provides for greater flexibility and strength, so long as the Diaphram is installed correctly.
PILOTS AIR MOTOR DIAPHRAGM INSTALLATION www.kimray.com Rubber inside Diaphragm is rolled onto Piston Leave rolled back 1/2 to 1 inch Rubber side is OUT Bonnet Body 1 2 3 4 Fabric on OUTSIDE INSTRUCTIONS: The Air Motor Diaphram is specifically designed for the Fabric Reinforcement to be against the Piston. This provides for greater flexibility and strength, so long as the Diaphragm is installed cor- rectly. The Diaphragm is shipped ith the Fabric side out, and can be easily installed properly by following the instructions below. STEP 1: Place the end of the Diaphragm against the end of the Piston. STEP 2: Push the Diaphragm onto the Piston, letting the Diaphragm roll inside out as it fits over the Piston. STEP 3: Leave from 1/2 to 1 inch of the lip curled back to hold the Diaphragm between the flanges on the Bonnet and Body. STEP 4: Re-Assemble Air Motor. Bulletin List Table of Contents