a. port number (/protocol number) b. osi layer they work on (he said L4 which seems to be wrong) 2. be perfect with your profile skills. 3. which router have you worked on. 4. stp, pvst, ... difference (port number also) 5. fundamental difference b/w ibgp and ebgp. 6. bgp attributes 7. BGP scenario based question: a. Outgoing traffic should prefer this path b. Incoming traffic should prefer this path 8. No dynamic/static routing allowed. Lan A should be able to reach lan B across a WAN (different network). 9. Dot1q tunneling 10. Simple STP question on port cost 11. How many / which supervisor engines do 6500 series switches support? 12. Command to activate 1 engine and put the other in the standby mode. 13. BGP synchronization rule 14. All FHRPs 15. Why mostly HSRP is preferred over GLBP / what is the problem with GLBP? 16. Regular expressions 17. MED 18. RR 19. BGP confed AS 20. Show command to see BGP confed ASs. 21. VPNv4 22. MPLS L3 vs L2 VPNs 23. SNMP/Network monitoring tools 24. VPNv4 packet length 25. EIGRP feasibility condition. 26. Is there any way for the routes that dont pass the feasibility condition to be used? a. Yes, if the successor goes down and a feasible successor becomes the successor and then if the feasibility condition passes for those routes, they can become feasible successors and later can also become successors should the successor go down. 27. Does EIGRP/RIP do load balancing? 28. What is AD used for? 29. IPSec VPNs? a. They are used for connection different sites securely over the internet. b. The idea is that instead of paying huge amounts for WAN connections, we use our normal internet connection to connect remote sites. 30. What do you mean by pre-pending AS in BGP? 31.