MASALAH YANG KERAP / BIASA TERJADI PADA PROSES PRESS/FUSE INTERLINING FINDING ISSUE REGARDING FUSING INTERLINING PROCESS
1. KEKUNINGAN / YELLOWISH Interlining atau kain berubah warna menjadi kekuning-kuningan. The colour of interlining of fabric change into yellowish
Penyebab / Cause Seting temperature / suhu mesin fuse/press terlalu tinggi dan setting time / kecepatan mesin fuse/press terlalu lama. Temperature setting of fusing machine are too hight and time setting of velocity fusing machine are too long
2. STRIKE THROUGH / TEMBUS Bahan perekat / lem menembus ke luar permukaan kain. Adhesive / Glue throught out the surface of fabric
Penyebab / Cause Dot (titik-titik) lem dari interlining terlalu besar untuk diaplikasikan / di gunakan pada kain yang tipis. Dot of adhesive / glue from interlining are too big to applicate / used to thin fabric
3. DELIMINATING Interlining tidak menempel dengan baik / mudah terlepas pada kain. Interlining can not stick well / easy loose from fabric Penyebab Cause Suhu mesin fuse / press, kecepatan mesin, pressure / tekanan mesin fuse / press tidak sesuai dengan rekomendasi. Temperature, velocity, pressure of fusing machine are not match to the recommendation
4. GLUE MARK / SISA LEM Sisa butiran lem dari interlining menempel pada kain. Residue of bead glue from interlining stick on the pabric
Penyebab / Cause Belt mesin dalam keadaan tidak bersih / terdapat sisa-sisa lem dari interlining yang melekat pada belt mesin sehingga menempel pada kain sewaktu proses fuse. Belt machine actually unclean / found the residue of adhesive from interlining which is adhere on belt machine so it may cause adhere to fabric during fusing process.