0 penilaian0% menganggap dokumen ini bermanfaat (0 suara)
16 tayangan2 halaman
Xiamen four-faith communication technology co.,ltd. Can't send SMS. --please check if AT command is workable, and signal is good enough, then check if SIM card is fastened well.
Xiamen four-faith communication technology co.,ltd. Can't send SMS. --please check if AT command is workable, and signal is good enough, then check if SIM card is fastened well.
Xiamen four-faith communication technology co.,ltd. Can't send SMS. --please check if AT command is workable, and signal is good enough, then check if SIM card is fastened well.
Xiamen Four-Faith Communication Technology Co., Ltd.
Xiamen Four-Faith Communication Technology Co.,Ltd.
Add J1-J3,3rdFloor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//en.four-faith.com Tel +86 13178273589 E-mail:coco@four-faith.com 1 1 F1003 cant send SMS. --Please check if AT command is workable, and signal is good enough, then check if SIM card is fastened well. --You have run out of charge of SIM card? --Baudrate is correct, and the SMS Center No. is correct? --The RS232 cable is ok?(2,3 cross and 5 straight) 2 I can send SMS with F1003, but receiving SMS is unavailable, why? --Please check if the storage of SMS is full. 3 I can receive SMS with F1003, but sending SMS is unavailable, why? --Normally, it is the problem of wrong SMS Center No., and you can check the current SMS Center No. with AT Command: AT+CSCA? 4 When I use F1103 for dial-up, it shows hardware conflict. --Please check if the COM port is occupied by other devices, baudrate is correct? or AT command is ok? --Flow control shall be none --AT+CGDCONT=1,IP,CMNET shall be correctly filled when dial-up (CMNET is the APN of China Mobile, please fill your local APN) --You can use our dial-up software. 5 F1103 show error code 777, 743 when dial-up --You have run out of the charge of SIM card? The signal is good enough? --You may reboot your PC or test it with another PC. --You can use our dial-up software. 6 There have data loss when use F2003 for sending messages to cell phone --Use another serial tool for testing. --Check if the baudrate and parity bit of serial tool is the same as F2003. --Check if sending format is accordance with display format. 7 How many bytes for each message of F1003? --140bytes, special code is included. 8 How to send SMS under AT TEXT mode? --Sets the modem into text mode via AT+CMGF=1, and you can get more code info via AT+CSDH=1. --Check if the SMS Center(SMSC) is correct via AT+CSCA? --Use following commands Xiamen Four-Faith Communication Technology Co., Ltd. Xiamen Four-Faith Communication Technology Co.,Ltd. Add J1-J3,3rdFloor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http//en.four-faith.com Tel +86 13178273589 E-mail:coco@four-faith.com 2 AT+CMGS=Cell Phone No. >imput the message, end with CTRL Z +CMGS: XX OK