Telecom Solutions
Antennas
Combiners
Tower Mount Amplifiers
Lightning Arresters
Coaxial Connectors
Coaxial & Feeder Cable
Base Station Accessories
Networking Products
Fibre Optic Products
V090601
Amphenol
Telecom Solutions
ii
- Table of Contents
Amphenol Introduction & Contact Information ii
Amphenol Telecom Solutions Product Overview Section A
Antennas
Section B
Coaxial Interconnects
Section C
Coaxial Cable
Section D
Jumper Cable Assemblies
Section E
Accessories for Telecommunication Applications
Section F
Assembly & Installation Instructions
Section G
Fibre Optic Products
Section H
Data / Networking Products
Section I
Glossary
Section J
Amphenol
Telecom Solutions
Page ii
Introduction to Amphenol Corporation
Amphenol was founded in 1932. The company is one of the largest manufacturers of interconnect products in the
world. The company designs, manufactures and markets electrical, electronic and fibre optic connectors,
interconnect systems and coaxial and flat-ribbon cable.
Its activities are geared towards 7 major markets: Aerospace / Military, Automotive, Broadband Communication,
Industrial, Internet Equipment, Mobile Phones and Wireless Infrastructure.
Amphenol is headquartered in Connecticut, USA and employs more than 28,000 people on a worldwide basis with
manufacturing and assembly operations in the Americas, Europe and Asia.
Amphenols Contribution to Telecom Networks
Amphenol is a leading global interconnect solutions provider to the wireless infrastructure market including
applications such as cellular base stations, radio links, mobile switches, wireless routers, wireless local loop and
cellsite antenna systems, combiners, transceivers, filters and amplifiers. Amphenol offers a wide product portfolio for
every wireless standard and generation radio technology including 2.5G, 3G, WiMAX and future IP solutions.
The product range includes RF, low frequency, power and fiber-optic connectors and cable assemblies, antennas,
backplane interconnect systems and power distribution systems.
This catalog details the most commonly used products for telecom networks. Should you require a product which is
not listed in the catalog, please forward your request to Amphenol.
Notice
Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All
statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or
responsibility of any kind expressed or implied.
Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of
patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or
that other measures may not be required. Specifications are typical and may not apply to all products.
Contact
Amphenol Jaybeam
Rutherford Drive, Park Farm South
Wellingborough, Northamptonshire, NN8 6AX
England
Tel: +44 (0) 1933 408 408
Fax: +44 (0) 1933 408 404
Email: uk.sales@jaybeamwireless.com
Web: www.amphenol-jaybeam.com
Amphenol
Telecom Solutions
A-1
Amphenol Telecom Solutions Product Overview
Where Can Amphenol Service Your Requirements?
Antennas
Section B
Indoor Antennas
Section B
Microwave Antennas
Contact Amphenol
Coaxial Connectors Coaxial Cable
Pre-assembled Jumpers, Feeders and
Cable Assemblies
Section C Section D Section E
Lightning Arresters Earthing Kits Cable Clamps
Section F Section F Section F
Amphenol is the only company
that supports the entire
interconnect requirements of a
cellular infrastructure system.
From high-speed backplane
interconnect solutions to
antenna, RF, fibre optic and
power products, the vast
majority of base stations are
enabled by our interconnection
technology.
Amphenol
Telecom Solutions
A-2
Amphenol Telecom Solutions Product Overview Continued
Splitters & Couplers Combiners Dual-band & Tri-band Tower Mount Amplifiers (TMA)
Section F Section F Section F
Power Distribution Units for TMAs Gland Plates & Grounding Bars Lugs
Section F Section F Section F
Consumables Calibration Kits Tools
Section F Section F Section F
Fibre Optic Products IP67 Ethernet Connectors Infiniband
Section H Section I Section I
(AISG) Antenna Interface Standards
Group Connectors & Cable Assemblies
Backplane Systems Busbars
Contact Amphenol Contact Amphenol Contact Amphenol
Filtered Terminal Blocks and Headers Quick Connect Jumpers Systems Integration TCS
Contact Amphenol Contact Amphenol Contact Amphenol
Amphenol
Telecom Solutions
Antennas
- Table of Contents
Amphenol Antenna Solutions Page B1
Product Overview
- Cellular Base Station Antennas
- Embedded Amplifer Antennas
- In-Building / Microcell Antennas
- Tri -Sector Ante nna Solutions UNICEL & TRIO
- UHF & VHF Base Station Antennas
- Marine Antennas
- Camoufage Solutions
Pages B1 B4
Amphenol Jaybeam SmartTilt - Remote Electrical Tilt Technology Pages B5 B6
Cellular Antennas Pages B15 B68
PMR Antennas
Pages B69 B196
Notice
Specifcations are subject to change without notice. Contact your nearest Ampheno l Corporation Sales Ofce for the latest specifcations. All
statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, w arranty, or
responsibility of any kind expressed or implied.
Stateme nts or suggestions concerning possible use of our products are made without representation or warranty that any such use is f ree of
patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or
that other measures may not be required. Specifcations are typical and may not apply to all products.
Miniature Antennas
- Whip Antenna for GSM/AMPS/ETACS
- Whip Antenna for GSM
- Short Whip Antenna for GSM/AMPS/ETACS
- Swivel Antenna 45~90 for GSM/DCS
- Swivel Antenna 45~90 for WiF i/Blue
- Swivel Antenna 45~90 433/868MHz
- Flat Antenna for GSM/DCS
- Cling-On for GSM/DCS
- Mini Me External Stubby for GSM/DCS
- GPS Antenna Active Antenna
- Mini GPS Dielectric Patch Antenna
- Enterprise GPS/GSM Antenna
- GPS/GSM Alternat e Packaged Antennas
Pages B197 B200
Amphenol
Telecom Solutions
B-1
Amphenol Antenna Solutions
Amphenol Antenna Solutions Product Range
450 MHz CDMA 1900 MHz PCS WCDMA & CDMA2000 Environment Decorations
800 MHz CDMA 1920-2170 MHz WCDMA TD-SCDMA Smart Antennas In-building Antennas
900 MHz GSM
1710-2170 MHz Multi-Band &
UMTS
2.4 GHz WIMAX MIMO
806-960 MHz Broadband
1710-2170 MHz Broadband &
GSM
3.5 GHz WIMAX Beamforming
1800 MHz DCS GSM and CDMA VET 5.7 GHz WIMAX Dual-Band & Tri-Band Series
Product Overview
Cellular Base Station Antennas
Amphenol Antenna Solutions has been supplying base station antennas into the cellular market
for nearly 20 years. In that time our product portfolio has grown to serve customers operating in
the 700 MHz, Cellular 850 MHz, GSM 900 MHz, IDEN, GSM 1800 MHz, PCS 1900 MHz, UMTS
2100 MHz, AWS and 2500 WiMAX frequency bands.
Amphenol Antenna Solutions offers a broad range of base station antenna models in indoor,
point-to-point, sectorized panel and omni directional configurations. Our high performance
antennas are field proven by network operators worldwide to deliver reliable communications in
harsh tower top environments.
Amphenol Antenna Solutions offers a wide selection of gains, azimuth beamwiths and electrical
downtilts to give RF engineers the tools they need for network optimization. Innovative
Wideband, Dual-Band and Tri-Band antenna solutions are also available to allow deployment of
multiple networks in existing tower space with minimum visual impact to the community.
In addition to antennas, Amphenol Antenna Solutions has established expertise in tri-sector
antenna structures, tower top electronics and Remote Electrical Tilt (RET) technology. This
depth of experience allows Amphenol Antenna Solutions engineers to develop highly
sophisticated site solutions to support challenging network requirements.
To search on-line for Cellular Base Station antennas:
http://www.amphenol-jaybeam.com
Product Overview Continued
Embedded Amplifier Antennas
Amphenol Antenna Solutions has pioneered the development of embedded amplifier technology
for base station antennas. Rather than simply re-packaging an existing Tower Mounted Amplifier
(TMA), our engineers were encouraged to reconsider all aspects of the design to insure a
solution that provides maximum system performance in the smallest physical size possible.
The resulting design improves RF system performance by minimizing cable losses in front of the
TMA. This allows network operators to achieve higher quality of service from their existing sites
or larger cell radii for new deployments.
The Amphenol Antenna Solutions design also reduces installation costs by eliminating two RF
jumper cables per antenna and by eliminating the time required to mount the external TMAs and
to weatherproof the external RF connections. The logistics savings in combination with the
improved RF system performance make the case for embedded amplifier technology very
compelling.
Amphenol
Telecom Solutions
B-2
In-Building / Microcell Antennas
Amphenol Antenna Solutions in-building and microcell antennas have been deployed by network
operators worldwide to provide improved coverage in office buildings, campuses, tunnels and
urban canyons. Our aesthetically pleasing, low profile designs are available in an assortment of
directional and omnidirectional configurations giving network engineers the tools needed to
optimize coverage in these difficult environments.
Innovative Wideband, Dual-Band and Tri-Band configurations are available allowing one
distributed antenna system to serve multiple service providers with minimum visual impact.
To search on-line for In-Building / Microcell antennas:
http://www.amphenol-jaybeam.com
Tri-Sector Antenna Solutions
Amphenol Antenna Solutions is the industry leader in low visual impact Tri-sector antenna solutions. Since our first Tri-Sector
antenna deployment over a decade ago, we have continuously enhanced the product range to support the need for smaller
antenna structures with increased functionality.
Amphenol Antenna Solutions understands the unique packaging challenges associated with tri-sector sites and has designed
UNICELL and TRIO to provide trouble free installation and easy serviceability. A full line of accessories including TMA mounting
canisters, lightning protection kits and flag pole adapter kits are available to allow customization to meet site specific
requirements.
UNICELL
Unicells are antenna enclosures designed to conceal a wide variety of off-the-shelf Amphenol
Antenna Solutions dual polarized antennas. The Unicell product family was designed by a team
of RF and mechanical engineers to provide robust mechanical structures with maximum RF
performance. Three module diameters are available in an assortment of lengths which can be
custom tailored to meet your site requirements. Depending on the antenna selected, features
such as azimuth panning & mechanical downtilt can be accommodated. In addition to the
modules themselves accessories such as TMA mounting canisters, lightning protection kits, GPS
antenna mounting kits, mounting masts and flag pole adapter kits have been developed to
enhance the product offering.
Product Features:
3-Sector antenna enclosures
312mm (12-inch), 368mm (14-inch) and 511 mm (20-inch) diameter versions
Removable concealment panels
Easy field access to antennas
Stackable to meet co-location requirements
AZ and EL adjustment available in some modules
To search on-line for UNICELL antennas:
http://www.amphenol-jaybeam.com
Amphenol
Telecom Solutions
B-3
Product Overview Continued
Tri-Sector Antenna Solutions - Continued
TRIO
TRIO antennas are 3-sector base station antennas concealed inside a compact cylindrical
shroud. Unlike Unicell structures, the TRIO radiating sub-assemblies are not individually
removable. Rather, the antenna for each sector is built directly into the TRIO mechanical
structure, creating the smallest possible antenna diameter. The product range includes
Wideband, Twin-Wideband, Dual-Band and Tri-Band configurations in diameters ranging
from 230mm (9-inch) to 457mm (18-inch.) TRIO antennas are RET capable and selected
models are available with azimuth panning. Accessories such as TMA mounting
canisters, lightning protection kits and mounting masts are available to enhance the
product offering.
Product Features:
3-Sector base station antennas
Wideband, Dual-Band and Tri-Band configurations
230mm (9-inch), 310mm (12-inch), 388mm (15-inch) and 457mm (18-inch) diameters
Removable connector access panels
Independent Remote Electrical Tilt on each sector
Independent AZ panning available in some modules
To search on-line for TRIO antennas:
http://www.amphenol-jaybeam.com
UHF & VHF Base Station Antennas
Amphenol Antenna Solutions is a leading supplier of professional base station antennas
to Private Mobile Radio (PMR), TETRA and broadcast markets worldwide. Applications
include public safety, transportation, utilities, government, military, digital radio as well as
mobile video broadcast using the DVB-H standard. Amphenol Antenna Solutions is a long
standing supplier to these markets and has an excellent reputation for delivering high
quality antennas for mission critical applications.
Amphenol Antenna Solutions offers a robust range of antenna models covering the VHF
and UHF frequency bands in indoor, Yagi, sector grid, sector panel, discone, collinear,
exposed dipole, center-fed dipole and end-fed dipole omni directional configurations. Our
high performance antennas are field proven by network operators worldwide to deliver
reliable communications in harsh tower top environments.
Amphenol Antenna Solutions offers a full range of robust mounting options as well as an
assortment of phasing harnesses to create high gain antennas for long range
applications.
Marine Antennas
Amphenol Antenna Solutions has produced high performance Marine antennas for more
than 30 years under the MAT Equipment brand covering the AM, FM, HF, CB, TV, VHF,
UHF and Cellular frequency bands. Our professional antennas are produced to the
highest quality standards in the industry, providing clear, reliable communications that you
can trust.
The marine environment is extremely harsh due to constant exposure to wind, sea and
pounding waves. Our engineers understand this environment and have developed robust
antenna designs using the finest materials and finishes available to insure years of
reliable service on the sea.
A wide selection of mounting options and accessories are available to suit your
application. Select from our large assortment of high quality mounting brackets, ratcheting
bases, RF connector styles and cable lengths to insure quick, easy installation.
To search on-line for Marine antennas:
http://www.amphenol-jaybeam.com
CAMOUFLAGE
SOLUTIONS
Chimney
Non
Penetrating
Roof Mount
Flagpole
Solutions for
all flag sizes
All Electrical Equipment
installed internally in our
tri-sector range
Lamp Post
Integration
Vegetation
Camouflage
B-4
Amphenol
Telecom Solutions
B-5
Amphenol Jaybeam SmartTilt - Remote Electrical Tilt Technology
Remote Electrical Tilt Technology
Amphenol Antenna Solutions has developed a complete range of equipment to provide Remote
Electrical Tilt (RET) operation, known as SmartTilt. Network engineers can make electrical
downtilt adjustments in minutes without the need to schedule site outage and without having to
pay for an expensive tower climb.
Amphenol Antenna Solutions is proud to be at the forefront of RET Technology and was responsible for gathering the industry
together to form the Antenna Interface Standards Group (AISG.) This group has worked together to develop an open
communications standard for remote control of basestation antennas and mast head amplifiers. All Amphenol Antenna Solutions
SmartTilt antennas are compliant with the AISG standard.
Amphenol Antenna Solutionss Mechanical Electrical Tilt (MET) antennas can be upgraded to remote electrical tilt (RET)
antennas with the addition of the appropriate RET unit. Two different RET configurations are available depending on the antenna
type and on your specific site requirements:
Internal RET:
Internal, cassette style RETs install inside the antenna structure and are not
visible after installation. This style construction often results in a slightly longer
antenna, but one with no external features to be damaged during installation or to
impede RF connector weatherproofing.
External RET:
External RETs extend beyond the bottom of the antenna structure and are not
typically considered part of the antenna length by zoning officials. With this style
RET, 100% of the antenna aperture is dedicated to radiating elements providing
higher gain for a given antenna size.
Portable Control Unit
Multiple RET antennas can be daisy chained together and controlled at the base of the tower via a single data feed cable. (See
Diagram.) For applications where running the additional control cable is not feasible, Amphenol Antenna Solutions offers an
assortment of AISG Modems to inject the control signals onto an existing RF feed cable. Electrical downtilt of antennas can be
controlled at the site using a standard laptop computer and a Amphenol Antenna Solutions Portable Control Unit (PCU) kit.
For more information on SmartTilt solutions, please contact Jaybeam Wireless sales and customer service.
JAYBEAM
Amphenol
Telecom Solutions
B-6
Amphenol Jaybeam SmartTilt Continued
Remote Electrical Tilt Technology Continued
SmartTilt Site Configuration
To search on-line for Remote Electrical Tilt Technology:
http://www.jaybeamwireless.com/remote-electrical-tilt-technology.php
JAYBEAM
Amphenol
Telecom Solutions
Cellular Antennas
- Table of Contents
ITEM CODE PAGE NUMBER
5052100 .. B-15
5052300 .. B-16
5130100 .. B-17
5133100 .. B-18
5133110 .. B-19
5142100 .. B-20
5157100 .. B-21
5157120 .. B-22 TO B-23
5160100 .. B-24
5162100 .. B-25
5162703 .. B-26
5162903 .. B-27
5163100 .. B-28
5165100 .. B-29
5176100 .. B-30
5176703 .. B-31
5176903 .. B-32
5177100 .. B-33 TO B-34
5177703 .. B-35
5257100 .. B-36
5260311 .. B-37
5264102 .. B-38
5265102 .. B-39 TO B-40
5270200 .. B-41 TO B-42
5290100 .. B-43
5829101 .. B-44 TO B-45
5860100 .. B-46 TO B-47
5860110 .. B-48 TO B-49
5863100 .. B-50 TO B-51
5863903 .. B-52 TO B-53
5876100 .. B-54 TO B-55
5880100 .. B-56 TO B-57
5880110 .. B-58 TO B-59
7691300 .. B-60
7825100 .. B-61
BMX065X13x000 .. B-62
BMX090X13x000 .. B-63
GSM3X75-22-A .. B-64
W85-13-x010 .. B-65 TO B-66
W85-19-x28 .. B-67 TO B-68
5052100
Electrical Characteristics
F8+7;+4)? ('4*9 806-960 MH@ / 1710-2170 MH@
P52'8/@':/54 %+8:/)'2
H58/@54:'2 (+'3=/*:. (-3 *B) O34/*/8+):/54'2
G'/4 2 *B/
I36+*'4)+ 50D
%"&! C 1.85:1 3'> ,;22 ('4*
I46;: 65=+8 50 & 6+8 ('4*
#+83/4':/54 N 95)1+: 54 30 )3 !G303 )'(2+ (2/-.: (85=4 0')1+:)
Mechanical Characteristics
D/3+49/549
B'9+ 62':+: B 18 )3 B 7.1 /4
M/4/: B 7 )3 B 2.8 /4
&+/-.: 0.35 1- 0.8 2(9
Packaging
P')1/4- */3+49/549 L>&>D 25 > 11 > 11 )3 9.8 > 4.3 > 4.3 /4
P')1/4- =+/-.: 0.7 1- 1.5 2(9
Mounting Options
M5;4:/4-
4 > 5 33 (0.16 > 0.20 /4) .52+9 /4 ('9+ 62':+
)54)+'2+* =/:. 3 8+35<'(2+ )'69
H58/@54:'2 %+8:/)'2 A 950 MH@ %+8:/)'2 A 1800 MH@ %+8:/)'2 A 1920 MH@ %+8:/)'2 A 2080 MH@
!E%0909 ===.'36.+452-0'?(+'3.)53 B-15
;5:+* 6+8,583'4)+ 6'8'3+:+89 '8+ 685</*+* :5 5,,+8 :?6/)'2 58 8'4-+ <'2;+9 542? '4* 3'? <'8? '9 ' 8+9;2: 5, 4583'2 3'4;,'):;8/4- '4* 56+8':/54'2 )54*/:/549. E>:8+3+ 56+8':/54'2
)54*/:/549 '4*/58 9:8+99 54 9:8;):;8'2 9;6658:9 /9 (+?54* 5;8 )54:852. ";). )54*/:/549 3'? 8+9;2: /4 *'3'-+ :5 :./9 685*;):. I3685<+3+4:9 :5 685*;): 3'? (+ 3'*+ =/:.5;: 45:/)+.
%-P52 A O34/ A 2.0 *B/
806-960 / 1710-2170 MH@
M$L#I BAND CEILING MO$N#ED MIC!OCELL AN#ENNA
#./9 '4:+44' 5,,+89 +>)+22+4: 6+8,583'4)+ =/:./4 ' 3/4/3'2 *+9/-4, ,58 ;9+ 54 3;2:/62+ ('4*9.
5052300
Electrical Characteristics
F8+7;+4)? ('4*9 806-960 MH@ / 1710-2500 MH@
P52'8/@':/54 %+8:/)'2
H58/@54:'2 (+'3=/*:. O34/*/8+):/54'2
G'/4 2 *B/
%"&! < 1.8:1
I46;: 65=+8 100 &
I46;: )544+):58 :?6+ / L5)':/54 N F+3'2+ + 30 )3 (11.8 /4) !G303 )'(2+ / !+'8
!'*53+ )5258 &./:+
Mechanical Characteristics
D/3+49/549 (B > H) 203 > 71 33 8.0 > 2.8 /4
&+/-.: 0.35 1- 0.8 2(9
Mounting Options
M5;4:/4- ")8+=9 9;662/+* (3 .52+9 /4 :.+ ('9+) ,58 )+/2/4- 35;4:/4-.
H58/@54:'2 %+8:/)'2 A 900 MH@ %+8:/)'2 A 1800 MH@ %+8:/)'2 A 1900 MH@ %+8:/)'2 A 2100 MH@
!E%0909 ===.'36.+452-0'?(+'3.)53 B-16
;5:+* 6+8,583'4)+ 6'8'3+:+89 '8+ 685</*+* :5 5,,+8 :?6/)'2 58 8'4-+ <'2;+9 542? '4* 3'? <'8? '9 ' 8+9;2: 5, 4583'2 3'4;,'):;8/4- '4* 56+8':/54'2 )54*/:/549. E>:8+3+ 56+8':/54'2
)54*/:/549 '4*/58 9:8+99 54 9:8;):;8'2 9;6658:9 /9 (+?54* 5;8 )54:852. ";). )54*/:/549 3'? 8+9;2: /4 *'3'-+ :5 :./9 685*;):. I3685<+3+4:9 :5 685*;): 3'? (+ 3'*+ =/:.5;: 45:/)+.
%-P52 A O34/ A 2.0 *B/
806-960 / 1710-2500 MH@
INDOO! CEILING MO$N# AN#ENNA
5130100
REV0809 www.amphenol-jaybeam.com 7 B-17
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | Dual Band VET | 85 | 147./16.0 dBi
880-960 / 1710-2170 MHz
5130100 is a dual band, dual polarized sector panel overing the GSM900/1800/1900 and
UMTS frequency bands. The antenna features variable electrical tilt with manual adjustment
on each band and can be fitted with an optional remote control.
Electrical Characteristics
Frequency bands 880-960 MHz 1710-2170 MHz
Polarization 45 45
Horizontal beamwidth 85 85
Vertical beamwidth 9.5 (0.5) 6 (0.5)
Gain 14.7 dBi (0.5) 16.0 dBi (0.5)
Electrical downtilt 0-10 0-10
Impedance 50
VSWR <1.4:1
Upper sidelobe rejection Better than 18 dB
Front-to-Back ratio > 24 dB ( 30 at the back)
Null fill Better than 22 dB
IM3 (2x20W carrier) -110 dBm
Isolation between ports < 30 dB
Isolation between bands < 32 dB
Input power 200 W 160 W
Connector(s) 4 Ports / 7/16-DIN / Female / Long Neck / Bottom
Mechanical Characteristics
Dimensions HxWxD 2040 x 286 x 138 mm 80.3 x 11.3 x 5.4 in
Weight without brackets 18.5 kg 41 lbs
Wind speed 160 km/hr 100 mph
Wind load @ 160 km/hr (100 mph) 665 N 149 lbf
Shroud / Housing Outdoor plastic / Aluminum
Mounting Options (Installation accessories to be ordered separately)
Description: Part number: Fits Pipe Diameter Weight
Mounting bracket kit 0900181/00 48-115 mm 1.9-4.5 in 2.6 kg 5.6 lbs
Kit to add mech. downtilt (0-10) --- --- ---
Notes: The mechanical control of the electrical tilt does not add any additional length at the bottom of the an-
tenna. When the optional remote control of the electrical tilt is installed, it fits completely inside the antenna
base and does not add any additional length to the dimensions shown above. The remote controlled antenna
still has the manual control capability and the tilt angle indicator.
5133100
REV0809 www.amphenol-jaybeam.com B-18
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | Dual Band VET | 85 | 16.0/16.0 dBi
880-960 / 1710-2170 MHz
5133100 is a full size dual band, dual polarized sector panel covering the
GSM900/1800/1900 and UMTS frequency bands. The antenna features variable electrical
tilt with manual adjustment on each band and can be fitted with an optional remote control.
Electrical Characteristics
Frequency bands 880-960 MHz 1710-2170 MHz
Polarization 45 45
Horizontal beamwidth 85 85
Vertical beamwidth 7 6
Gain 16.0 dBi 16.0 dBi
Electrical downtilt 0-10 0-10
Impedance 50
VSWR <1.4 0-2 = <1.45; 2-10 = <1.4
Upper sidelobe rejection Better than 18 dB
Front-to-Back ratio > 25 dB
Null fill Better than 22 dB
IM3 (2x20W carrier) -110 dBm
Isolation between ports 0-2 = > 27 dB; 2-10 = > 30 dB
Isolation between bands > 40 dB
Input power 200 W 160 W
Connector(s) 4 Ports / 7/16-DIN / Female / Long Neck / Bottom
Mechanical Characteristics
Dimensions HxWxD 2680 x 286 x 138 mm 105.5 x 11.3 x 5.4 in
Weight without brackets 25 kg 55 lbs
Wind speed 160 km/hr 100 mph
Wind load @ 160 km/hr (100 mph) 900 N 202 lbf
Shroud / Housing Outdoor plastic / Aluminum
Mounting Options (Installation accessories to be ordered separately)
Description: Part number: Fits Pipe Diameter
Mounting bracket kit 0900393/00 48-115 mm 1.9-4.5 in
Mounting bracket kit 0900501/00 70-150 mm 2.8-5.9 in
Kit to add mech. downtilt (0-9.5) 0900394/00 ---
Wall mount with azimuth pan 0900395/00 ---
Wall mount with mech. tilt & az. pan 0900533/00 ---
Notes: The mechanical control of the electrical tilt does not add any additional length at the bottom of the an-
tenna. When the optional remote control of the electrical tilt is installed, it fits completely inside the antenna
base and does not add any additional length to the dimensions shown above. The remote controlled antenna
still has the manual control capability and the tilt angle indicator. This antenna can be delivered with the RET
units already fitted under part number 5133000.
5133110
REV0809 www.amphenol-jaybeam.com B-19
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | Dual Band VET | 85 | 15.5/15.5 dBi
880-960 / 1710-2170 MHz
5133110 is a full size dual band, dual polarized sector panel covering the
GSM900/1800/1900 and UMTS frequency bands. The antenna features variable electrical
tilt with manual adjustment on each band and can be fitted with an optional remote control.
Electrical Characteristics
Frequency bands 880-960 MHz 1710-2170 MHz
Polarization 45 45
Horizontal beamwidth 85 85
Vertical beamwidth 7 6
Gain 15.5 dBi 15.5 dBi
Electrical downtilt 0-10 0-10
Impedance 50
VSWR <1.4 0-2 = <1.45; 2-10 = <1.4
Upper sidelobe rejection Better than 18 dB
Front-to-Back ratio > 25 dB
Null fill Better than 22 dB
IM3 (2x20W carrier) -110 dBm
Isolation between ports 0-2 = > 27 dB; 2-10 = > 30 dB
Isolation between bands > 40 dB
Input power 200 W 160 W
Connector(s) 4 Ports / 7/16-DIN / Female / Long Neck / Bottom
Mechanical Characteristics
Dimensions HxWxD 2680 x 286 x 138 mm 105.5 x 11.3 x 5.4 in
Weight without brackets 25 kg 55 lbs
Wind speed 160 km/hr 100 mph
Wind load @ 160 km/hr (100 mph) 900 N 202 lbf
Shroud / Housing Outdoor plastic / Aluminum
Mounting Options (Installation accessories to be ordered separately)
Description: Part number: Fits Pipe Diameter
Mounting bracket kit 0900393/00 48-115 mm 1.9-4.5 in
Mounting bracket kit 0900501/00 70-150 mm 2.8-5.9 in
Kit to add mech. downtilt (0-9.5) 0900394/00 ---
Wall mount with azimuth pan 0900395/00 ---
Wall mount with mech. tilt & az. pan 0900533/00 ---
Notes: The mechanical control of the electrical tilt does not add any additional length at the bottom of the an-
tenna. When the optional remote control of the electrical tilt is installed, it fits completely inside the antenna
base and does not add any additional length to the dimensions shown above. The remote controlled antenna
still has the manual control capability and the tilt angle indicator. This antenna can be delivered with the RET
units already fitted under part number 5133010.
5142100
REV0809 www.amphenol-jaybeam.com B-20
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | VET Panel | 65 | 19.0 dBi
1710-2170 MHz
5142100 is a 65 sector wide band GSM1800/GSM1900/UMTS antenna fully housed in a
fiberglass shroud. The antenna features variable electrical tilt with manual adjustment and
can be fitted with an optional remote control.
Horizontal Plane Vertical Plane
Electrical Characteristics
Frequency band 1710-2170 MHz
Polarization 45
Horizontal beamwidth 65
Vertical beamwidth 4.5
Gain 19.0 dBi
Electrical downtilt 2-10
Impedance 50
VSWR < 1.4:1
Upper sidelobe rejection Better than 18 dB
Front-to-Back ratio > 25 dB
Null fill Better than 18 dB
Isolation between ports > 30 dB
IM3 (2x20W carrier) -153 dBc
Maximum power per port 160 W
Mechanical Characteristics
Dimensions HxWxD 1950 x 157 x 69 mm 76.8 x 6.2 x 2.7 in
Weight without brackets 9.5 kg 21 lbs
Wind speed 160 km/hr 100 mph
Wind load @ 160 km/hr (100 mph) 395 N 89 lbf
Connector(s) 2 ports / 7/16 DIN / Female / Long Neck / Bottom
Shroud Fiberglass extrusion, Grey RAL 7035
Mounting Options (Installation accessories to be ordered separately)
Description: Part number: Fits pipe diameter: Weight
Mounting bracket kit 0900390/00 48-115 mm 1.9-4.5 in 2.55 kg 5.6 lbs
Kit to add mechanical downtilt --- ---
Notes: Mounting plates add 45 mm (1.8 in) to top and bottom. Mechanical control of the electrical tilt does not add addi-
tional length at the bottom of antenna. The optional remote control of the electrical tilt fits completely inside the antenna.
The remote controlled antenna still has the manual control capability and the tilt angle indicators.
5157100
Electrical Characteristics (general)
The antenna contains two radiating arrays housed in a single mechanical structure.
Isolation between arrays > 32 dB
Electrical Characteristics of each antenna
Frequency band 1710-2170 MHz
Polarization 45
Horizontal beamwidth 65
Vertical beamwidth 6
Gain 16.4 dBd / 18.5 dBi
Electrical downtilt 0-10
Impedance 50
VSWR < 1.4:1
Upper sidelobe rejection Better than 18 dB
Front-to-Back ratio > 25 dB
Null fill Better than 18 dB
Isolation between ports > 30 dB
IM3 (2x20W carrier) -153 dBc
Maximum power per port 160 W
REV0809 www.amphenol-jaybeam.com B-21
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
XX-Pol | VET Panel | 65 | 18.5 dBi
1710-2170 MHz
Mechanical Characteristics
Dimensions HxWxD 1730 x 340 x 78 mm 67.3 x 13.4 x 3.0 in
Weight without brackets 18 kg 40 lbs
Wind speed 160 km/hr 100 mph
Wind load @ 160 km/hr (100 mph) 785 N 176 lbf
Connector(s) 4 ports / 7/16 DIN / Female / Long Neck / Bottom
Shroud / Housing Outdoor plastic / Aluminum
Mounting Options (Installation accessories to be ordered separately)
Description: Part number: Fits pipe diameter: Weight
Mounting bracket kit 0900390/00 48-115 mm 1.9-4.5 in 2.55 kg 5.6 lbs
Kit to add mechanical downtilt (0-14) 0900374/00 ---
Notes: Mounting plates add 45 mm (1.8 in) to top and bottom. Mechanical control of the electrical tilt does not add addi-
tional length at the bottom of antenna. The optional remote control of the electrical tilt fits completely inside the antenna.
The remote controlled antenna still has the manual control capability and the tilt angle indicators for each antenna.
Horizontal Plane Vertical Plane
5157100 is a twin 65 sector antenna covering the GSM1800/GSM1900/UMTS frequency
bands. Each antenna has variable electrical tilt capability with manual adjustment and can
be fitted with an optional remote control.
5157120
5157020 5157020G
Access Ports Description (Connectors)
The antenna has four connectors located at the bottom face and marked with colored rings.
Wideband 1710-2170 MHz ports WHITE rings 2 x 7/16 DIN Long Neck
Wideband 1710-2170 MHz ports
Recommended for UMTS2100
BLUE rings 2 x 7/16 DIN Long Neck
Electrical Characteristics (general)
The antenna contains two radiating arrays housed in a single mechanical structure.
Isolation between arrays > 32 dB
Electrical Characteristics of each antenna
Frequency band 1710-2170 MHz
Polarization 45
Horizontal beamwidth 65
Vertical beamwidth 6
Gain 16.4 dBd / 18.5 dBi
Electrical downtilt 0-10
Impedance 50
VSWR < 1.4
Upper sidelobe rejection > 18 dB
Front-to-Back ratio > 25 dB
Null fill < 18 dB typical
Isolation between ports > 30 dB
IM3 (2x20W carrier) < -153 dBc
Maximum power per port 160 W
Electrical Downtilt Control
Electrical downtilt can be controlled separately for each internal array.
Manual control: The electrical tilt of each band is changed by tuning the adjustment screw at the end of each
tilt indicator with a 10 mm socket wrench.
Remote control: Optional RET modules (one per internal array), already configured and compatible with
3GPP/AISG2.0 or AISG1.1, allow the remote control of the variable electrical downtilt. The remote control of
other equipment or sectors is possible by daisy-chain through the use of an extra AISG connector located on
each RET module.
The RET modules are fully inserted at the bottom of the antenna and do not add any additional length. The tilt
angle indicators always stay visible and each band of the antenna still has manual tilt control (manual override).
The antennas delivered with RET fitted in it (5157120 and 5157120G) include the AISG cable necessary for the
daisy chain between the two RET units.
RET module part number
(two per antenna)
RETU-CA01
RETU-CG01
for AISG1.1 protocol (2 supplied with 5157120)
for 3GPP/AISG2.0 protocol (2 supplied with 5157120G)
REV0809 www.amphenol-jaybeam.com B-22
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
XX-Pol | VET Panel | 65 | 18.5 dBi
1710-2170 MHz
Model number options:
5157120 Manual Electrical Tilt Antenna
5157020 Remote Electrical Tilt Antenna (AISG1.1)
5157020G Remote Electrical Tilt Antenna (3GPP/AISG2.0)
Double wideband antenna, dual polarized, 4 connectors
Variable electrical tilt, 0-10 on each antenna
MET and RET versions, AISG1.1 or 3GPP/AISG2.0
RET modules fully inserted inside the antenna (field replaceable)
5157120
5157020 5157020G
B-23 www.amphenol-jaybeam.com REV0809
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
1710-2170 MHz
XX-Pol | VET Panel | 65 | 18.5 dBi
Environmental
Operating temperature range -40 to +60 C -40 to +140 F
Environmental ETS 300 019
RoHS compliant Yes
Mechanical Characteristics
Dimensions HxWxD 1710 x 340 x 77 mm 67.3 x 13.4 x 3.0 in
Weight without brackets 18 kg 40 lbs
Survival wind speed 200 km/hr 124 mph
Operational wind speed 160 km/hr 99 mph
Wind load @ 160 km/hr (100 mph) 785 N 176 lbf
Shroud Outdoor plastic, grey RAL7035
Packaging
Packing dimensions 2300 x 340 x 210 mm 90.6 x 13.4 x 8.3 in
Packing weight 20.0 kg 44 lbs
Packing volume 0.164 m
3
5.8 ft
3
Mounting Options (Installation accessories to be ordered separately)
Description: Part number: Fits pipe diameter: Weight:
Mounting bracket kit 0900181/00 48-115 mm 1.9-4.5 in 3.4 kg 7.5 lbs
Mounting bracket kit 0900182/00 70-150 mm 2.8-5.9 in 3.9 kg 8.6 lbs
Kit to add mechanical downtilt 0900188/00 --- 1.5 kg 3.3 lbs
Wall mount with azimuth pan 0900183/00 --- 1.6 kg 3.5 lbs
Wall mount with mech. tilt & az. pan 0900885/00 --- 3.3 kg 7.3 lbs
Installation
Do not install the antenna with the connectors facing upwards.
Bottom View
Location of the RET modules
Tilt angle indicators
5160100
REV0809 www.amphenol-jaybeam.com B-24
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | Dual Band VET | 65 | 17.5/18.2 dBi
880-960 / 1710-2170 MHz
5160100 is a full size dual band, dual polarized sector panel covering the
GSM900/1800/1900 and UMTS frequency bands. The antenna features variable electrical
tilt with manual adjustment on each band and can be fitted with an optional remote control.
Electrical Characteristics 880-960 MHz 1710-2170 MHz
Frequency bands 880-960 MHz 1710-1880 MHz 1850-1990 MHz 1920-2170 MHz
Polarization 45 45
Horizontal beamwidth 64 66 63 60
Vertical beamwidth 6.9 5.8 5.7 5.6
Gain 17.5 dBi 17.3 dBi 17.7 dBi 18.2 dBi
Electrical downtilt 0-10 0-10
Impedance 50
VSWR <1.4
Upper sidelobe rejection 18 dB typical
Front-to-Back ratio > 25 dB
Null fill 18 dB typical
IM3 (2x20W carrier) -110 dBm
Isolation between ports Tilt 0-2 > 28 dB Tilt 2-10 > 30 dB
Isolation between bands 35 dB typical
Input power 200 W 160 W
Connector(s) 4 Ports / 7/16-DIN / Female / Long Neck / Bottom
Mechanical Characteristics
Dimensions HxWxD 2680 x 286 x 138 mm 105.5 x 11.3 x 5.4 in
Weight without brackets 25 kg 55 lbs
Wind speed 160 km/hr 100 mph
Wind load @ 160 km/hr (100 mph) 900 N 202 lbf
Shroud / Housing Outdoor plastic / Aluminum
Mounting Options (Installation accessories to be ordered separately)
Description: Part number: Fits Pipe Diameter Weight
Mounting bracket kit 0900393/00 48-115 mm 1.9-4.5 in 5.8 kg 13 lbs
Kit to add mech. downtilt (0-10) --- --- ---
Notes: The mechanical control of the electrical tilt does not add any additional length at the bottom of the an-
tenna. When the optional remote control of the electrical tilt is installed, it fits completely inside the antenna
base and does not add any additional length to the dimensions shown above. The remote controlled antenna
still has the manual control capability and the tilt angle indicator.
5162100
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | VET Panel | 65 | 18.5 dBi
1710-2170 MHz
REV0809 www.amphenol-jaybeam.com B-25
5162100 is a 65 sector wide band GSM1800/GSM1900/UMTS antenna fully housed in a
fiberglass shroud. The antenna features variable electrical tilt with manual adjustment and
can be fitted with an optional remote control.
Horizontal Plane Vertical Plane
Electrical Characteristics
Frequency band 1710-2170 MHz
Polarization 45
Horizontal beamwidth 65
Vertical beamwidth 6
Gain 18.5 dBi
Electrical downtilt 0-10
Impedance 50
VSWR < 1.4:1
Upper sidelobe rejection Better than 18 dB
Front-to-Back ratio > 25 dB
Null fill Better than 18 dB
Isolation between ports > 30 dB
IM3 (2x20W carrier) -153 dBc
Maximum power per port 160 W
Mechanical Characteristics
Dimensions HxWxD 1690 x 157 x 69 mm 66.5 x 6.2 x 2.7 in
Weight without brackets 8.4 kg 19 lbs
Wind speed 160 km/hr 100 mph
Wind load @ 160 km/hr (100 mph) 340 N 76 lbf
Connector(s) 2 ports / 7/16 DIN / Female / Long Neck / Bottom
Shroud Fiberglass extrusion, Grey RAL 7035
Mounting Options (Installation accessories to be ordered separately)
Description: Part number: Fits pipe diameter: Weight
Mounting bracket kit 0900390/00 48-115 mm 1.9-4.5 in 2.55 kg 5.6 lbs
Kit to add mechanical downtilt (0-14) --- ---
Notes: Mounting plates add 45 mm (1.8 in) to top and bottom. Mechanical control of the electrical tilt does not add addi-
tional length at the bottom of antenna. The optional remote control of the electrical tilt fits completely inside the antenna.
The remote controlled antenna still has the manual control capability and the tilt angle indicators.
5162703
REV0809 www.amphenol-jaybeam.com B-26
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | VET TRIO | 65 | 18.5 dBi
1710-2170 MHz
Model number options:
5162703 Manual Electrical Tilt - Unit fitted with 3 sectors
5162701 Manual Electrical Tilt - Unit fitted with 1 sector
5162702 Manual Electrical Tilt - Unit fitted with 2 sectors
5162603 Remote Electrical Tilt
TRIO230 (120 fixed azimuth)
Three 65 wideband antennas installed at 120 in a cylindrical shroud
MET and RET versions available
Manual units can be upgraded with RET control
A built-in canister at the bottom allows access to connectors and tilt control
A remote controlled antenna still has manual control capability with a visible tilt indicator
Electrical Characteristics
Frequency band 1710-2170 MHz
Polarization 45
Horizontal beamwidth 65
Vertical beamwidth 6
Gain 18.5 dBi
Electrical downtilt 0-10
Sector antenna bearings 0, 120, 240
Impedance 50
VSWR < 1.5:1
Upper sidelobe rejection Better than 18 dB
Front-to-Back ratio > 25 dB
Null fill Better than 18 dB
Isolation between ports > 30 dB
IM3 (2x20W carrier) -153 dBc
Maximum power per port 160 W
Connector(s) 6 ports / 7/16 DIN / Female / Long Neck / Bottom
Mechanical Characteristics
Overall Dimensions Height x Diameter 1940 x 230 mm 76.4 x 9.1 in
Antenna Height 1565 mm 61.6 in
Access Panel Height x Diameter 250 x 230 mm 9.8 x 9.1 in
Weight 27 kg 60 lbs
Wind speed - Survival 200 km/hr 124 mph
Wind speed - Operational 160 km/hr 100 mph
Wind load @ 160 km/hr (100 mph) 390 N 88 lbf
Shroud / Housing Outdoor plastic, Grey RAL7035 / Aluminum
Installation
Any base allowing a 230 mm (9.1 in) diameter flat surface. The antenna must be bolted with six M10 screws 120 apart
in a 180 mm (7.1 in) diameter construction circle.
Accessosries
Lightning Finial TRX-LPK
5162903
REV0809 www.amphenol-jaybeam.com B-27
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | VET TRIO | 65 | 18.5 dBi
With Individual Azimuth Panning (15)
1710-2170 MHz
Model number options:
5162903 Manual Electrical Tilt - Unit fitted with 3 sectors
5162901 Manual Electrical Tilt - Unit fitted with 1 sector
5162902 Manual Electrical Tilt - Unit fitted with 2 sectors
5162803 Remote Electrical Tilt
TRIO310 (15 individual azimuth panning)
Three 65 wideband antennas installed at 120 in a cylindrical shroud
MET and RET versions available
Manual units can be upgraded with RET control
A built-in canister at the bottom allows access to connectors and tilt control
A remote controlled antenna still has manual control capability with a visible tilt indicator
Electrical Characteristics
Frequency band 1710-2170 MHz
Polarization 45
Horizontal beamwidth 65
Vertical beamwidth 6
Gain 18.5 dBi
Electrical downtilt 0-10
Sector antenna bearings 0 (15), 120 (15), 240 (15)
Impedance 50
VSWR < 1.4:1
Upper sidelobe rejection Better than 18 dB
Front-to-Back ratio > 25 dB
Null fill Better than 18 dB
Isolation between ports > 30 dB
IM3 (2x20W carrier) -153 dBc
Maximum power per port 160 W
Connector(s) 6 ports / 7/16 DIN / Female / Long Neck / Bottom
Mechanical Characteristics
Overall Dimensions Height x Diameter 1937 x 310 mm 76.3 x 12.2 in
Antenna Height 1565 mm 61.6 in
Access Panel Height x Diameter 250 x 310 mm 9.8 x 12.2 in
Weight 37 kg 82 lbs
Wind speed - Survival 200 km/hr 124 mph
Wind speed - Operational 160 km/hr 100 mph
Wind load @ 160 km/hr (100 mph) 252 N 57 lbf
Shroud / Housing Outdoor plastic, Grey RAL7035 / Aluminum
Installation
Any base allowing a 310 mm (12.2 in) diameter flat surface. The antenna must be bolted with six M10 screws 60 apart
in a 260 mm (10.2 in) diameter construction circle.
Accessosries
Lightning Finial TRX-LPK
5163100
REV0809 www.amphenol-jaybeam.com B-28
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | Dual Band VET | 65 | 16.5/17.5 dBi
870-960 / 1710-2170 MHz
5163100 is a 3/4 dual band, dual polarized sector panel covering the GSM900/1800/1900
and UMTS frequency bands. The antenna features variable electrical tilt with manual adjust-
ment on each band and can be fitted with an optional remote control.
Electrical Characteristics
Frequency bands 870-960 MHz 1710-2170 MHz
Polarization 45 45
Horizontal beamwidth 65 65
Vertical beamwidth 9.5 (0.5) 6 (0.5)
Gain 16.5 dBi (0.5) 17.5 dBi (0.5)
Electrical downtilt 0-10 0-10
Impedance 50
VSWR <1.4:1
Upper sidelobe rejection Better than 18 dB
Front-to-Back ratio > 25 dB
Null fill Better than 22 dB
IM3 (2x20W carrier) -110 dBm
Isolation between ports < 30 dB
Isolation between bands < 32 dB
Input power 200 W 160 W
Connector(s) 4 Ports / 7/16-DIN / Female / Long Neck / Bottom
Mechanical Characteristics
Dimensions HxWxD 2040 x 286 x 138 mm 80.3 x 11.3 x 5.4 in
Weight without brackets 18.5 kg 41 lbs
Wind speed 160 km/hr 100 mph
Wind load @ 160 km/hr (100 mph) 665 N 149 lbf
Shroud / Housing Outdoor plastic / Aluminum
Mounting Options (Installation accessories to be ordered separately)
Description: Part number: Fits Pipe Diameter Weight
Mounting bracket kit 0900181/00 48-115 mm 1.9-4.5 in 2.6 kg 5.6 lbs
Kit to add mech. downtilt (0-10) --- --- ---
Notes: The mechanical control of the electrical tilt does not add any additional length at the bottom of the an-
tenna. When the optional remote control of the electrical tilt is installed, it fits completely inside the antenna
base and does not add any additional length to the dimensions shown above. The remote controlled antenna
still has the manual control capability and the tilt angle indicator.
5165100
Electrical Characteristics
Frequency bands 870-960 MHz 1710-2170 MHz
Polarization 45 45
Horizontal beamwidth 65 65
Vertical beamwidth 13.5 (0.5) 7 (0.5)
Gain 15.0 dBi (0.4) 16.5 dBi (0.4)
Electrical downtilt 0-10 0-10
Impedance 50
VSWR <1.4:1
Upper sidelobe rejection Better than 18 dB
Front-to-Back ratio > 25 dB
Null fill Better than 22 dB
IM3 (2x20W carrier) -110 dBm
Input power 200 W 160 W
Connector(s) 4 Ports / 7/16-DIN / Female / Long Neck / Bottom
Mechanical Characteristics
Dimensions HxWxD 1500 x 286 x 138 mm 59.1 x 11.3 x 5.4 in
Weight without brackets 14.5 kg 32 lbs
Wind load @ 161 km/hr (100 mph) 500 N 112 lbf
Shroud / Housing Outdoor plastic / Aluminum
Mounting Options (Installation accessories to be ordered separately)
Description: Part number: Fits Pipe Diameter Weight
Mounting bracket kit 0900181/00 48-115 mm 1.9-4.5 in 2.6 kg 5.6 lbs
Kit to add mech. downtilt (0-10) --- --- ---
Notes: The mechanical control of the electrical tilt does not add any additional length at the bottom of the an-
tenna. When the optional remote control of the electrical tilt is installed, it fits completely inside the antenna
base and does not add any additional length to the dimensions shown above. The remote controlled antenna
still has the manual control capability and the tilt angle indicator.
REV0809 www.amphenol-jaybeam.com B-29
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | Dual Band VET | 65 | 15.0/16.5 dBi
870-960 / 1710-2170 MHz
5165110 is a half size dual band, dual polarized sector panel covering the
GSM900/1800/1900 and UMTS frequency bands. The antenna features variable electrical
tilt with manual adjustment on each band and can be fitted with an optional remote control.
5176100
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | VET Panel | 65 | 17.5 dBi
1710-2170 MHz
REV0809 www.amphenol-jaybeam.com B-30
5176100 is a 65 sector wide band GSM1800/GSM1900/UMTS antenna fully housed in a
fiberglass shroud. The antenna features variable electrical tilt with manual adjustment and
can be fitted with an optional remote control.
Horizontal Plane Vertical Plane
Electrical Characteristics
Frequency band 1710-2170 MHz
Polarization 45
Horizontal beamwidth 65
Vertical beamwidth 7
Gain 17.5 dBi
Electrical downtilt 2-14
Impedance 50
VSWR < 1.4:1
Upper sidelobe rejection Better than 18 dB
Front-to-Back ratio > 25 dB
Null fill Better than 22 dB
Isolation between ports > 30 dB
IM3 (2x20W carrier) -153 dBc
Maximum power per port 160 W
Mechanical Characteristics
Dimensions HxWxD 1430 x 157 x 69 mm 56.3 x 6.2 x 2.7 in
Weight without brackets 8 kg 18 lbs
Wind speed 160 km/hr 100 mph
Wind load @ 160 km/hr (100 mph) 290 N 65 lbf
Connector(s) 2 ports / 7/16 DIN / Female / Long Neck / Bottom
Shroud Fiberglass extrusion, Grey RAL 7035
Mounting Options (Installation accessories to be ordered separately)
Description: Part number: Fits pipe diameter: Weight
Mounting bracket kit 0900390/00 48-115 mm 1.9-4.5 in 2.55 kg 5.6 lbs
Mounting bracket kit 0900503/00 70-150 mm 2.8-5.9 in ---
Wall mounting kit with azimuth pan 0900408/00 --- ---
Kit to add mechanical downtilt 0900474/00 --- ---
Notes: Mounting plates add 45 mm (1.8 in) to top and bottom. Mechanical control of the electrical tilt does not add addi-
tional length at the bottom of antenna. The optional remote control of the electrical tilt fits completely inside the antenna.
The remote controlled antenna still has the manual control capability and the tilt angle indicators.
This antenna can be delivered with the RET unit already fited under part number 5176000.
5176703
REV0809 www.amphenol-jaybeam.com B-31
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | VET TRIO | 65 | 17.5 dBi
1710-2170 MHz
Electrical Characteristics
Frequency band 1710-2170 MHz
Polarization 45
Horizontal beamwidth 65
Vertical beamwidth 7
Gain 17.5 dBi
Electrical downtilt 2-14
Sector antenna bearings 0, 120, 240
Impedance 50
VSWR < 1.4:1
Upper sidelobe rejection Better than 18 dB
Front-to-Back ratio > 25 dB
Null fill Better than 22 dB
Isolation between ports > 30 dB
IM3 (2x20W carrier) -153 dBc
Maximum power per port 160 W
Connector(s) 6 ports / 7/16 DIN / Female / Long Neck / Bottom
Mechanical Characteristics
Overall Dimensions Height x Diameter 1710 x 230 mm 67.3 x 9.1 in
Antenna Height 1335 mm 52.6 in
Access Panel Height x Diameter 250 x 230 mm 9.8 x 9.1 in
Weight 25 kg 55 lbs
Wind speed - Survival 200 km/hr 124 mph
Wind speed - Operational 160 km/hr 100 mph
Wind load @ 160 km/hr (100 mph) 184 N 41 lbf
Shroud / Housing Outdoor plastic, Grey RAL7035 / Aluminum
Installation
Any base allowing a 230 mm (9.1 in) diameter flat surface. The antenna must be bolted with six M10 screws 120 apart
in a 180 mm (7.1 in) diameter construction circle.
Accessosries
Lightning Finial TRX-LPK
Model number options:
5176703 Manual Electrical Tilt - Unit fitted with 3 sectors
5176701 Manual Electrical Tilt - Unit fitted with 1 sector
5176702 Manual Electrical Tilt - Unit fitted with 2 sectors
5176603 Remote Electrical Tilt
TRIO230 (120 fixed azimuth)
Three 65 wideband antennas installed at 120 in a cylindrical shroud
MET and RET versions available
Manual units can be upgraded with RET control
A built-in canister at the bottom allows access to connectors and tilt control
A remote controlled antenna still has manual control capability with a visible tilt indicator
5176903
REV0809 www.amphenol-jaybeam.com B-32
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | VET TRIO | 65 | 17.5 dBi
With Individual Azimuth Panning (15)
1710-2170 MHz
Electrical Characteristics
Frequency band 1710-2170 MHz
Polarization 45
Horizontal beamwidth 65
Vertical beamwidth 7
Gain 17.5 dBi
Electrical downtilt 2-14
Sector antenna bearings 0 (15) , 120 (15), 240 (15)
Impedance 50
VSWR < 1.4:1
Upper sidelobe rejection Better than 18 dB
Front-to-Back ratio > 25 dB
Null fill Better than 22 dB
Isolation between ports > 30 dB
IM3 (2x20W carrier) -153 dBc
Maximum power per port 160 W
Connector(s) 6 ports / 7/16 DIN / Female / Long Neck / Bottom
Mechanical Characteristics
Overall Dimensions Height x Diameter 1710 x 310 mm 67.3 x 12.2 in
Antenna Height 1335 mm 52.6 in
Access Panel Height x Diameter 250 x 310 mm 9.8 x 12.2 in
Weight 32 kg 71 lbs
Wind speed - Survival 200 km/hr 124 mph
Wind speed - Operational 160 km/hr 100 mph
Wind load @ 160 km/hr (100 mph) 268 N 60 lbf
Shroud / Housing Outdoor plastic, Grey RAL7035 / Aluminum
Installation
Any base allowing a 310 mm (12.2 in) diameter flat surface. The antenna must be bolted with six M10 screws 60 apart
in a 260 mm (10.2 in) diameter construction circle.
Accessosries
Lightning Finial TRX-LPK
Model number options:
5176903 Manual Electrical Tilt - Unit fitted with 3 sectors
5176901 Manual Electrical Tilt - Unit fitted with 1 sector
5176902 Manual Electrical Tilt - Unit fitted with 2 sectors
5176803 Remote Electrical Tilt
TRIO310 (15 individual azimuth panning)
Three 65 wideband antennas installed at 120 in a cylindrical shroud
MET and RET versions available
Manual units can be upgraded with RET control
A built-in canister at the bottom allows access to connectors, tilt control and azimuth control
A remote controlled antenna still has manual control capability with a visible tilt indicator
5177100
5177000 5177000G
Access Ports Description (Connectors)
The antenna has four connectors located at the bottom face and marked with colored rings.
Wideband 1710-2170 MHz ports WHITE rings 2 x 7/16 DIN Long Neck
Wideband 1710-2170 MHz ports
Recommended for UMTS2100
BLUE rings 2 x 7/16 DIN Long Neck
Electrical Characteristics (general)
The antenna contains two radiating arrays housed in a single mechanical structure.
Isolation between arrays > 32 dB
Electrical Characteristics of each antenna
Frequency band 1710-2170 MHz
Polarization 45
Horizontal beamwidth 65
Vertical beamwidth 7
Gain 15.4 dBd / 17.5 dBi
Electrical downtilt 2-14
Impedance 50
VSWR < 1.4
Upper sidelobe rejection > 18 dB
Front-to-Back ratio > 25 dB
Null fill < 18 dB typical
Isolation between ports > 30 dB
IM3 (2x20W carrier) < -153 dBc
Maximum power per port 160 W
Electrical Downtilt Control
Electrical downtilt can be controlled separately for each internal array.
Manual control: The electrical tilt of each band is changed by tuning the adjustment screw at the end of each
tilt indicator with a 10 mm socket wrench.
Remote control: Optional RET modules (one per internal array), already configured and compatible with
3GPP/AISG2.0 or AISG1.1, allow the remote control of the variable electrical downtilt. The remote control of
other equipment or sectors is possible by daisy-chain through the use of an extra AISG connector located on
each RET module.
The RET modules are fully inserted at the bottom of the antenna and do not add any additional length. The tilt
angle indicators always stay visible and each band of the antenna still has manual tilt control (manual override).
The antennas delivered with RET fitted in it (5177000 and 5177000G) include the AISG cable necessary for the
daisy chain between the two RET units.
RET module part number
(two per antenna)
RETU-CA01
RETU-CG01
for AISG1.1 protocol (2 supplied with 5177000)
for 3GPP/AISG2.0 protocol (2 supplied with 5177000G)
REV0809 www.amphenol-jaybeam.com B-33
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
XX-Pol | VET Panel | 65 | 17.5 dBi
1710-2170 MHz
Model number options:
5177100 Manual Electrical Tilt Antenna
5177000 Remote Electrical Tilt Antenna (AISG1.1)
5177000G Remote Electrical Tilt Antenna (3GPP/AISG2.0)
Double wideband antenna, dual polarized, 4 connectors
Variable electrical tilt, 2-14 on each antenna
MET and RET versions, AISG1.1 or 3GPP/AISG2.0
RET modules fully inserted inside the antenna (field replaceable)
5177100
5177000 5177000G
B-34 www.amphenol-jaybeam.com REV0809
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
1710-2170 MHz
XX-Pol | VET Panel | 65 | 17.5 dBi
Environmental
Operating temperature range -40 to +60 C -40 to +140 F
Environmental ETS 300 019
RoHS compliant Yes
Mechanical Characteristics
Dimensions HxWxD 1430 x 340 x 77 mm 56.3 x 13.4 x 3.0 in
Weight without brackets 13.1 kg 29 lbs
Survival wind speed 200 km/hr 124 mph
Operational wind speed 160 km/hr 99 mph
Wind load @ 160 km/hr (100 mph) 660 N 148 lbf
Shroud Outdoor plastic, grey RAL7035
Packaging
Packing dimensions 2000 x 380 x 140 mm 78.7 x 15.0 x 5.5 in
Packing weight 20.0 kg 44 lbs
Packing volume 0.106 m
3
3.7 ft
3
Mounting Options (Installation accessories to be ordered separately)
Description: Part number: Fits pipe diameter: Weight:
Mounting bracket kit 0900181/00 48-115 mm 1.9-4.5 in 3.4 kg 7.5 lbs
Mounting bracket kit 0900182/00 70-150 mm 2.8-5.9 in 3.9 kg 8.6 lbs
Kit to add mechanical downtilt 0900188/00 --- 1.5 kg 3.3 lbs
Wall mount with azimuth pan 0900183/00 --- 1.6 kg 3.5 lbs
Wall mount with mech. tilt & az. pan 0900885/00 --- 3.3 kg 7.3 lbs
Installation
Do not install the antenna with the connectors facing upwards.
Bottom View
Location of the RET modules
Tilt angle indicators
5177703
REV0809 www.amphenol-jaybeam.com B-35
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
XX-Pol | VET TRIO | 65 | 17.5/17.5 dBi
1710-2170 MHz
Electrical Characteristics
Frequency band 1710-2170 MHz
Polarization 45
Horizontal beamwidth 65
Vertical beamwidth 7
Gain 17.5 dBi (each antenna per sector)
Electrical downtilt 2-14
Sector antenna bearings 0, 120, 240
Impedance 50
VSWR < 1.4:1
Upper sidelobe rejection Better than 18 dB
Front-to-Back ratio > 25 dB
Null fill Better than 22 dB
Isolation between ports > 30 dB
Isolation between antennas in a sector > 32 dB
IM3 (2x20W carrier) -153 dBc
Maximum power per port 160 W
Connector(s) 12 ports / 7/16 DIN / Female / Long Neck / Bottom
Mechanical Characteristics
Overall Dimensions Height x Diameter 1710 x 388 mm 67.3 x 15.3 in
Antenna Height 1335 mm 52.6 in
Access Panel Height x Diameter 250 x 388 mm 9.8 x 15.3 in
Weight 53 kg 117 lbs
Wind speed - Survival 200 km/hr 124 mph
Wind speed - Operational 160 km/hr 100 mph
Wind load @ 160 km/hr (100 mph) 402 N 90 lbf
Shroud / Housing Outdoor plastic, Grey RAL7035 / Aluminum
Installation
Any base allowing a 388 mm (15.3 in) diameter flat surface. The antenna must be bolted with six M10 screws 60 apart
in a 260 mm (10.2 in) diameter construction circle.
Accessosries
Lightning Finial TRX-LPK
Model number options:
5177703 Manual Electrical Tilt - Unit fitted with 3 sectors
5177701 Manual Electrical Tilt - Unit fitted with 1 sector
5177702 Manual Electrical Tilt - Unit fitted with 2 sectors
5177603 Remote Electrical Tilt
TRIO380 (120 fixed azimuth)
Three 65 TWIN wideband antennas installed at 120 in a cylindrical shroud
MET and RET versions available
Manual units can be upgraded with RET control
A built-in canister at the bottom allows access to connectors and tilt control
A remote controlled antenna still has manual control capability with a visible tilt indicator
5257100
REV0809 www.amphenol-jaybeam.com B-36
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
XX-Pol | VET Panel | 65 | 19.0 dBi
1710-2170 MHz
5257100 is a twin 65 sector antenna covering the GSM1800/GSM1900/UMTS frequency
bands. Each antenna has variable electrical tilt capability with manual adjustment and can
be fitted with an optional remote control.
P
a
t
t
e
r
n
A
v
a
ila
b
le
S
o
o
n
P
a
t
t
e
r
n
A
v
a
ila
b
le
S
o
o
n
Electrical Characteristics (general)
The antenna contains two radiating arrays housed in a single mechanical structure.
Isolation between arrays > 32 dB
Electrical Characteristics of each antenna
Frequency band 1710-2170 MHz
Polarization 45
Horizontal beamwidth 65
Vertical beamwidth 4.5
Gain 16.9 dBd / 19.0 dBi
Electrical downtilt 2-10
Impedance 50
VSWR < 1.4:1
Upper sidelobe rejection Better than 18 dB
Front-to-Back ratio > 25 dB
Null fill Better than 18 dB
Isolation between ports > 30 dB
IM3 (2x20W carrier) -153 dBc
Maximum power per port 160 W
Mechanical Characteristics
Dimensions HxWxD 1990 x 340 x 78 mm 78.3 x 13.4 x 3.1 in
Weight without brackets 18 kg 40 lbs
Wind speed 160 km/hr 100 mph
Wind load @ 160 km/hr (100 mph) 900 N 202 lbf
Connector(s) 4 ports / 7/16 DIN / Female / Long Neck / Bottom
Shroud / Housing Outdoor plastic / Aluminum
Mounting Options (Installation accessories to be ordered separately)
Description: Part number: Fits pipe diameter: Weight
Mounting bracket kit 0900390/00 48-115 mm 1.9-4.5 in 2.55 kg 5.6 lbs
Kit to add mechanical downtilt (0-14) --- ---
Notes: Mounting plates add 45 mm (1.8 in) to top and bottom. Mechanical control of the electrical tilt does not add addi-
tional length at the bottom of antenna. The optional remote control of the electrical tilt fits completely inside the antenna.
The remote controlled antenna still has the manual control capability and the tilt angle indicators for each antenna.
Horizontal Plane Vertical Plane
5260311
880-960 MHz 1710-2170 MHz
Horizontal 5 | Vertical Horizontal 5 | Vertical
REV0809 www.amphenol-jaybeam.com B-37
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | Dual Band VET Antenna | 65 | 17.0 dBi
880-960 / 1710-2170 MHz
Electrical Characteristics
Frequency band 880-960 MHz 1710-1880 MHz 1900-2170 MHz
Polarization 45 45
Horizontal beamwidth 70 68 65
Vertical beamwidth 9.5 6.5 5.5
Gain 15.0 dBi 16.0 dBi 17.0 dBi
Electrical downtilt 0-10 0-10
Impedance 50 50
Return loss > 15.6 dB > 15.0 dB
Upper sidelobe 16 dB typical 16 dB typical
Front-to-Back ratio > 20 dB > 29 dB
Isolation > 25 dB > 25 dB
Maximum power per port 200 W 160 W
Connector(s) 4 ports / 7/16-DIN / Female / Bottom
Mechanical Characteristics
Dimensions HxWxD 2400 x 236 x 130 mm 94.5 x 9.3 x 5.1 in
Overall dimensions to base of
TMA mounting HxWxD
2920 x 236 x 130 mm 115.0 x 9.3 x 5.1 in
Weight - 2400 mm 19.5 kg 43 lbs
Weight - 2920 mm 21.5 kg 47 lbs
Wind speed 200 km/hr 124 mph
Wind load - 2400 mm 800 N 180 lbf
Wind load - 2920 mm 900 N 202 lbf
Colour Grey RAL 7035
Mounting Part number: Weight:
Mounting bracket 0900590/00 6 kg 13 lbs
2920 mm shown in photo
5264102
REV0809 www.amphenol-jaybeam.com B-38
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | VET Panel | 65 | 16.5 dBi
880-960 MHz
This 3/4 panel is designed for use on the GSM900 band and is offered with variable electri-
cal tilt. The new curved shape of the shroud offers both improved appearance and reduce
windload.
Electrical Characteristics
Frequency band 880-960 MHz
Polarization 45
Horizontal beamwidth 62 (5)
Vertical beamwidth 9
Gain 16.5 dBi
Electrical downtilt 0-10
Impedance 50
VSWR < 1.4:1
Upper sidelobe levels Typically better than 18 dB
Front-to-Back ratio > 25 dB
Isolation between ports > 30 dB
Maximum power per port 200 W
Mechanical Characteristics
Dimensions HxWxD 2050 x 287 x 138 mm 80.7 x 11.3 x 5.4 in
Weight without brackets 13 kg 29 lbs
Wind speed 160 km/hr 100 mph
Wind load @ 160 km/hr (100 mph) Front:610, Side:355, Rear:860N Front:137, Side:80, Rear:193 lbf
Connector(s) 2 ports / 7/16 DIN / Female / Bottom
Shroud / Housing Outdoor plastic / aluminum
Mounting Options (Installation accessories to be ordered separately)
Description: Part number: Fits pipe diameter: Weight
Mounting bracket kit 0900181/00 48-115 mm 1.9-4.5 in 5.0 kg 11 lbs
Kit to add mechanical downtilt (0-10) --- ---
Notes: The mechanical control of the electrical tilt does not add any additional length at the bottom of the antenna.
When the optional remote control of the electrical tilt is installed, it fits completely inside the antenna base and does not
add any additional length to the above dimensions. The remote controlled antenna still has the manual control capability
and the tilt angle indicators.
5265102
5265002 5265002G
Electrical Characteristics
Frequency band 880-960 MHz
Polarization 45
Horizontal beamwidth 65 (5)
Vertical beamwidth 7
Gain 15.4 dBd / 17.5 dBi
Electrical downtilt 0-10 (continuously adjustable)
Impedance 50
VSWR < 1.4
Upper sidelobe rejection > 18 dB
Front-to-Back ratio > 30 dB
Null fill < 22 dB typical
Isolation between ports > 30 dB
IM3 (2x20W carrier) < -110 dBm
Maximum power per port 200 W
Connector(s) 2 Ports / 7/16-DIN Long Neck / Female / Bottom
Electrical Downtilt Control
Manual control: The electrical tilt is changed by turning the adjustment screw at the end of the tilt indicator with
a 10 mm socket wrench.
Remote control: An optional RET module, already configured and compatible with 3GPP/AISG2.0 or AISG1.1,
allows the remote control of the variable electrical downtilt. This module is fully inserted at the bottom of the
antenna and does not add any additional length. The remote control of other equipment or sectors is possible
by daisy-chain through the use of an extra AISG connector located on the RET module.
The tilt angle indicator always stays visible and the antenna still has manual tilt control (manual override).
RET module part number
RETU-CA11
RETU-CG11
for AISG1.1 protocol (supplied with 5265002)
for 3GPP/AISG2.0 protocol (supplied with 5265002G)
REV0809 www.amphenol-jaybeam.com B-39
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | VET Panel | 65 | 17.5 dBi
880-960 MHz
Model number options:
5265102 Manual Electrical Tilt Antenna
5265002 Remote Electrical Tilt Antenna (AISG1.1)
5265002G Remote Electrical Tilt Antenna (3GPP/AISG2.0)
Single band antenna, dual polarization, 2 connectors
Wide range of electrical tilt, variable 0-10
MET and RET versions, AISG1.1 or 3GPP/AISG2.0
RET modules fully inserted inside the antenna (field replaceable)
5265102
5265002 5265002G
B-40 www.amphenol-jaybeam.com REV0809
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
880-960 MHz
X-Pol | VET Panel | 65 | 17.5 dBi
Environmental
Operating temperature range -40 to +60 C -40 to +140 F
Environmental ETS 300 019
RoHS compliant Yes
Mechanical Characteristics
Dimensions HxWxD 2690 x 287 x 138 mm 105.9 x 11.3 x 5.4 in
Weight without brackets 17 kg 37.5 lbs
Survival wind speed 200 km/hr 124 mph
Operational wind speed 160 km/hr 99 mph
Wind load @ 160 km/hr (100 mph) Front: 819 N Side: 480 N Back: 1160N Front: 184 lbf Side: 108 lbf Back: 261 lbf
Shroud Outdoor plastic, grey RAL7035
Packaging
Packing dimensions 2930 x 330 x 210 mm 115.3 x 13 x 8.3 in
Packing weight 26 kg 57.3 lbs
Packing volume 0.203 m
3
7.2 ft
3
Mounting Options (Installation accessories to be ordered separately)
Description: Part number: Fits pipe diameter: Weight:
Mounting bracket kit 0900393/00 48-115 mm 1.9-4.5 in 5.1 kg 11.2 lbs
Mounting bracket kit 0900501/00 70-150 mm 2.8-5.9 in 5.8 kg 12.8 lbs
Kit to add mechanical downtilt (0-10) 0900394/00 --- 3.1 kg 6.8 lbs
Wall mount with azimuth pan 0900395/00 --- 2.3 kg 5.1 lbs
Wall mount with mech. tilt & az. pan 0900533/00 --- 4.4 kg 9.7 lbs
Installation
Always use the three mounting points to install the antenna.
Do not install the antenna with the connectors facing upwards.
Bottom View
5270200
5270303 5270306
REV0809 www.amphenol-jaybeam.com B-41
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | Dual Band VET TRIO | 65 | 15.0/17.0 dBi
880-960 / 1710-2170 MHz
Model number options:
5270200 Manual Electrical Tilt Antenna
5270303 Manual Electrical Tilt for GSM Band, Remote Electrical Tilt for Wideband
5270306 Remote Electrical Tilt Antenna for both bands
Tri-sector, monopole dual band antenna, 12 connectors
Independent tilt on each band 0-10 / 0-10
MET and RET versions
Flag pole kit available
Electrical Characteristics
Frequency band 880-960 MHz 1710-1880 MHz 1900-2170 MHz
Polarization 45 45
Horizontal beamwidth 70 68 65
Vertical beamwidth 9.5 6.5 5.5
Gain 12.9 dBd / 15.0 dBi 13.9 dBd / 16.0 dBi 14.9 dBd / 17.0 dBi
Electrical downtilt 0-10 0-10
Impedance 50 50
Return loss > 15.6 dB > 15.0 dB
Upper sidelobes < -16 dB typical
Front-to-Back ratio > 20 dB > 29 dB
In-band isolation > 25 dB
Inter-band isolation > 30 dB
IM3 (2x20W carrier) < -153 dBc
Maximum power per port 200 W 160 W
Connector(s) 12 ports / 7/16-DIN / Female / Bottom
RET Type / Part Number 5270303: RET-CD71; 5270306: RETU-DCA71
Mechanical Characteristics
Overall Dimensions Height x Diameter 2830 x 325 mm 111.4 x 12.8 in
Weight 70 kg 154 lbs
Survival wind speed 200 km/hr 125 mph
Wind load @ 160 km/hr (100 mph) 496 N 111 lbf
Color RAL 7035 Grey
Mounting Accessories
Item: Description: Part Number:
Adapter plate Adapter plate to provide six M10 x 1.5 tapped holes on
240 mm (9.4 in) bolt circle
3902908/68
TRIO Flange Interface
5270200
5270303 5270306
B-42 www.amphenol-jaybeam.com REV0809
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
880-960 / 1710-2170 MHz
X-Pol | Dual Band VET TRIO | 65 | 15.0/17.0 dBi
880-960 MHz
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
Horizontal 0 | Vertical 2 | Vertical 4 | Vertical 6 | Vertical
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
8 | Vertical 10 | Vertical
1710-2170 MHz
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
Horizontal 0 | Vertical 2 | Vertical 4 | Vertical 6 | Vertical
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
8 | Vertical 10 | Vertical
5290100
Electrical Characteristics
Frequency bands 880-960 MHz
Polarization 45
Horizontal beamwidth 85 (5)
Vertical beamwidth 7
Gain 16.0 dBi
Electrical downtilt (X) 0-10
Impedance 50
VSWR < 1.4:1
Upper sidelobe levels Better than 18 dB
Front-to-Back ratio > 25 dB
Null fill Better than 22 dB
Isolation between ports > 30 dB
Input power 200 W (each port)
Connector(s) 2 Ports / 7/16-DIN / Female / Bottom
Mechanical Characteristics
Dimensions HxWxD 2690 x 287 x 138 mm 105.9 x 11.3 x 5.4 in
Weight without brackets 17 kg 37 lbs
Wind load @ 161 km/hr (100 mph) 820 N 184 lbf
Shroud / Housing Outdoor plastic / Aluminum
Mounting Options Part Number Fits Pipe Diameter
Mounting bracket kit 0900393/00 48-115 mm 1.9-4.5 in
Kit to add mech. downtilt (0-10) ---
Notes: The mechanical control of the electrical tilt does not add any additional length at the bottom of the an-
tenna. When the optional remote control of the electrical tilt is installed, it fits completely inside the antenna
base and does not add any additional length to the dimensions shown above. The remote controlled antenna
still has the manual control capability and the tilt angle indicator.
Horizontal Plane Vertical Plane
REV0809 www.amphenol-jaybeam.com B-43
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | VET Panel | 85 | 16.0 dBi
880-960 MHz
5829101
5829001 5829001G
Access Ports Description (Connectors)
The antenna has four connectors located at the bottom face, marked with colored rings.
Low Band (RED rings) 880-960 MHz ports 2 x 7/16 DIN Long Neck
High Band (BLUE rings) 1710-2170 MHz ports 2 x 7/16 DIN Long Neck
Electrical Characteristics Low Band (RED) High Band (BLUE)
Frequency band 880-960 MHz 1710-1880 MHz 1920-2170 MHz
Polarization 45 45 45
Horizontal beamwidth 65 65 63
Vertical beamwidth 13 7.5 7
Gain
mid tilt
14.5 0.5 dBi 16.3 0.5 dBi 16.7 0.5 dBi
Electrical downtilt 0-14 0-12 0-12
Impedance 50 50 50
VSWR < 1.5 < 1.5 < 1.5
Upper sidelobe rejection 15 dB typical 15 dB typical 15 dB typical
Front-to-Back ratio > 22 dB > 25 dB > 25 dB
Isolation between ports > 25 dB > 25 dB > 25 dB
Isolation between bands > 35 dB > 35 dB > 35 dB
IM3 (2x20W carrier) < -110 dBm < -110 dBm < -110 dBm
Maximum power per port 200 W 160 W 160 W
Electrical Downtilt Control
Electrical downtilt can be controlled separately for low band (RED) and high band (BLUE). The tilt indicators are covered
by a removable transparent cap.
Manual control: A colored knob at the end of the tilt indicator allows change of the tilt without need for a tool. Knob color
is identical to connector colors as defined above. To access the knob, the cap is removed by turning it counter clockwise.
It is re-installed by opposite rotation.
Remote control: The remote control of the electrical tilt is managed by a module (MDCU) totally inserted at the bottom
of the antenna. One single module controls individually the tilt of each band (no need of daisy chain cables between the
bands). For RET control, the transparent cap must be in place and locked.
This module does not add any additional length at the bottom of the antenna. The tilt angle indicator stays always visible
and the antenna still has manual tilt control (manual override).
RET module part number MDCU-A0002 Compliant to AISG1.1 (one unit included with 5829001)
MDCU-G0002 Compliant to 3GPP/AISG2.0 (one unit included with 5829001G)
REV0909 www.amphenol-jaybeam.com B-44
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
P
R
E
L
I
M
I
N
A
R
Y
XX-Pol | VET Panel | 65 | 15.0 /17.2 dBi
880-960 / 1710-2170 MHz
Model number options:
5829101 Manual Electrical Tilt Antenna
5829001 Remote Electrical Tilt Antenna (AISG1.1)
5829001G Remote Electrical Tilt Antenna (3GPP/AISG2.0)
Dual band antenna, 4 connectors
Independent tilt on each band 0-14 / 0-12
Slimline profile for low wind load
MET and RET versions, AISG1.1 or 3GPP/AISG2.0
Single RET module to control all tilt angles
5829101
5829001 5829001G
B-45 www.amphenol-jaybeam.com REV0909
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
880-960 / 1710-2170 MHz
XX-Pol | VET Panel | 65 | 15.0 / 17.5 dBi
Environmental
Operating temperature range -40 to +60 C -40 to +140 F
Environmental ETS 300 019
RoHS compliant Yes
Mechanical Characteristics
Dimensions HxWxD 1500 x 253 x 147 mm 59.1 x 10.0 x 5.8 in
Weight without brackets 17 kg 37.5 lbs
Survival wind speed 200 km/hr 124 mph
Operational wind speed 160 km/hr 100 mph
Wind load @ 160 km/hr (100 mph) Front: 330 N Front: 74.2 lbf
Shroud / Housing Outdoor plastic, Grey RAL7035
Mounting Options (Installation accessories to be ordered separately)
Description: Part number: Fits pipe diameter: Weight:
Mounting bracket kit 0900393/00 48-115 mm 1.9-4.5 in 5.1 kg 11 lbs
Installation
Always attach antenna by the three mounting points. Do not install with the connectors facing upward.
Bottom View
Tilt indicator covered by a
transparent cap. Manual ad-
justment is accessed by re-
moving the cap. Knob color is
same as connectors.
For RET control, the cap must
be in place.
Location of the MDCU for
RET control
P
R
E
L
I
M
I
N
A
R
Y
5860100
5860000 5860000G
REV0809 www.amphenol-jaybeam.com B-46
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | Dual Band VET | 65 | 17.5/18.0 dBi
880-960 / 1710-2170 MHz
Access Ports Description (Connectors)
The antenna has four connectors located at the bottom face, marked with colored rings.
Low Band (RED rings) 880-960 MHz ports 2 x 7/16 DIN Long Neck
High Band (BLUE rings) 1710-2170 MHz ports 2 x 7/16 DIN Long Neck
Electrical Characteristics Low Band (RED) High Band (BLUE)
Frequency band 880-960 MHz 1710-1880 MHz 1900-2170 MHz
Polarization 45 45
Horizontal beamwidth 65 65 64
Vertical beamwidth 7 6 6
Gain
0 downtilt
5 downtilt
10 downtilt
17.0-17.5 dBi
17.0-17.5 dBi
16.9-17.4 dBi
17.3-17.6 dBi
17.2-17.4 dBi
17.2-17.3 dBi
17.6-18.1 dBi
17.4-17.9 dBi
17.3-17.7 dBi
Electrical downtilt 0-10 0-10
Impedance 50 50
VSWR < 1.4 < 1.4
Upper sidelobe rejection 18 dB typical 18 dB typical
Front-to-Back ratio > 30 dB > 30 dB
Isolation between ports > 30 dB > 30 dB
Isolation between bands 45 dB typical 45 dB typical
IM3 (2x20W carrier) < -110 dBm < -110 dBm
Maximum power per port 200 W 160 W
Electrical Downtilt Control
Electrical downtilt can be controlled separately for low band and high band. The two tilt indicators are covered by a re-
movable transparent cap.
Manual control: A colored knob at the end of the tilt indicator allows change of the tilt without need for a tool. Knob
color is identical to connector colors as defined above. To access the knob, the cap is removed by turning it counter
clockwise. It is re-installed by opposite rotation.
Remote control: The remote control of the electrical tilt is managed by a module (MDCU) totally inserted at the bottom
of the antenna. One single module controls individually the tilt of each band (no need of daisy chain cables between the
bands). For RET control, the transparent cap must be in place and locked.
This module does not add any additional length at the bottom of the antenna. The tilt angle indicator stays always visible
and the antenna still has manual tilt control (manual override).
RET module part number MDCU-A0001 Compliant to AISG1.1
MDCU-G0001 Compliant to 3GPP/AISG2.0
Model number options:
5860100 Manual Electrical Tilt Antenna
5860000 Remote Electrical Tilt Antenna (AISG1.1)
5860000G Remote Electrical Tilt Antenna (3GPP/AISG2.0)
Dual band antenna, 4 connectors
Independent tilt on each band 0-10 / 4-14
Slimline profile for low wind load
MET and RET versions, AISG1.1 or 3GPP/AISG2.0
Single RET module to control all tilt angles
5860100
5860000 5860000G
B-47 www.amphenol-jaybeam.com REV0809
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
880-960 / 1710-2170 MHz
X-Pol | Dual Band VET | 65 | 17.5/18.0 dBi
Environmental
Operating temperature range -40 to +60 C -40 to +140 F
Environmental ETS 300 019
RoHS compliant Yes
Mechanical Characteristics
Dimensions HxWxD 2690 x 253 x 147 mm 105.9 x 10.0 x 5.8 in
Weight without brackets 25 kg 55 lbs
Survival wind speed 200 km/hr 124 mph
Operational wind speed 160 km/hr 100 mph
Wind load @ 160 km/hr (100 mph) Front: 580, Side: 480, Rear: 910 N Front:130, Side:108, Rear 205 lbf
Shroud / Housing Outdoor plastic, RAL7035 / Aluminum
Packaging
Packing dimensions 2930 x 350 x 240 mm 115.4 x 13.8 x 9.4 in
Packing weight 33 kg 73 lbs
Packing volume 0.246 m
3
8.7 ft
3
Mounting Options (Installation accessories to be ordered separately)
Description: Part number: Fits pipe diameter: Weight:
Mounting bracket kit 0900393/00 48-115 mm 1.9-4.5 in 5.1 kg 11 lbs
Mounting bracket kit 0900501/00 70-150 mm 2.8-5.9 in 5.8 kg 13 lbs
Kit to add mech. downtilt (0-10) 0900394/00 --- 3.1 kg 7 lbs
Wall mount with azimuth pan 0900395/00 --- 2.3 kg 5 lbs
Wall mount with mech. tilt & az. pan 0900533/00 --- 4.4 kg 10 lbs
Installation
Always attach antenna by the three mounting points. Do not install antenna with the connectors facing upward.
Bottom View
Tilt indicator covered by a
transparent cap. Manual ad-
justment is accessed by re-
moving the cap. Knob color is
same as connectors.
For RET control, the cap must
be in place.
Location of the MDCU for
RET control
5860110
5860010 5860010G
REV0809 www.amphenol-jaybeam.com B-48
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | Dual Band VET Diplexed | 65 | 17.3/17.8 dBi
880-960 / 1710-2170 MHz
Access Ports Description (Connectors)
The antenna has two connectors located at the bottom face, marked with colored rings.
Low Band (RED rings) 880-960 MHz ports
2 x 7/16 DIN Long Neck
High Band (BLUE rings) 1710-2170 MHz ports
Electrical Characteristics Low Band (RED) High Band (BLUE)
Frequency band 880-960 MHz 1710-1880 MHz 1900-2170 MHz
Polarization 45 45
Horizontal beamwidth 65 65 64
Vertical beamwidth 7 6 6
Gain
0 downtilt
5 downtilt
10 downtilt
16.8-17.3 dBi
16.8-17.3 dBi
16.7-17.2 dBi
17.0-17.3 dBi
16.9-17.1 dBi
16.9-17.0 dBi
17.3-17.8 dBi
17.1-17.6 dBi
17.0-17.4 dBi
Electrical downtilt 0-10 0-10
Impedance 50 50
VSWR < 1.4 < 1.4
Upper sidelobe rejection 18 dB typical 18 dB typical
Front-to-Back ratio > 30 dB > 30 dB
Isolation between ports > 30 dB > 30 dB
Isolation between bands 45 dB typical 45 dB typical
IM3 (2x20W carrier) < -110 dBm < -110 dBm
Maximum power per port 200 W 160 W
Electrical Downtilt Control
Electrical downtilt can be controlled separately for low band and high band. The two tilt indicators are covered by a re-
movable transparent cap.
Manual control: A colored knob at the end of the tilt indicator allows change of the tilt without need for a tool. Knob
color is identical to connector colors as defined above. To access the knob, the cap is removed by turning it counter
clockwise. It is re-installed by opposite rotation.
Remote control: The remote control of the electrical tilt is managed by a module (MDCU) totally inserted at the bottom
of the antenna. One single module controls individually the tilt of each band (no need of daisy chain cables between the
bands). For RET control, the transparent cap must be in place and locked.
This module does not add any additional length at the bottom of the antenna. The tilt angle indicator stays always visible
and the antenna still has manual tilt control (manual override).
RET module part number MDCU-A0001 Compliant to AISG1.1
MDCU-G0001 Compliant to 3GPP/AISG2.0
Model number options:
5860110 Manual Electrical Tilt Antenna
5860010 Remote Electrical Tilt Antenna (AISG1.1)
5860010G Remote Electrical Tilt Antenna (3GPP/AISG2.0)
Dual band antenna with internal diplexer, 2 connectors
Independent tilt on each band 0-10 / 4-14
Slimline profile for low wind load
MET and RET versions, AISG1.1 or 3GPP/AISG2.0
Single RET module to control all tilt angles
5860110
5860010 5860010G
B-49 www.amphenol-jaybeam.com REV0809
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
880-960 / 1710-2170 MHz
X-Pol | Dual Band VET Diplexed | 65 | 17.3/17.8 dBi
Environmental
Operating temperature range -40 to +60 C -40 to +140 F
Environmental ETS 300 019
RoHS compliant Yes
Mechanical Characteristics
Dimensions HxWxD 2690 x 253 x 147 mm 105.9 x 10.0 x 5.8 in
Weight without brackets 25 kg 55 lbs
Survival wind speed 200 km/hr 124 mph
Operational wind speed 160 km/hr 100 mph
Wind load @ 160 km/hr (100 mph) Front: 580, Side: 480, Rear: 910 N Front:130, Side:108, Rear 205 lbf
Shroud / Housing Outdoor plastic, RAL7035 / Aluminum
Packaging
Packing dimensions 2930 x 350 x 240 mm 115.4 x 13.8 x 9.4 in
Packing weight 33 kg 73 lbs
Packing volume 0.246 m
3
8.7 ft
3
Mounting Options (Installation accessories to be ordered separately)
Description: Part number: Fits pipe diameter: Weight:
Mounting bracket kit 0900393/00 48-115 mm 1.9-4.5 in 5.1 kg 11 lbs
Mounting bracket kit 0900501/00 70-150 mm 2.8-5.9 in 5.8 kg 13 lbs
Kit to add mech. downtilt (0-10) 0900394/00 --- 3.1 kg 7 lbs
Wall mount with azimuth pan 0900395/00 --- 2.3 kg 5 lbs
Wall mount with mech. tilt & az. pan 0900533/00 --- 4.4 kg 10 lbs
Installation
Always attach antenna by the three mounting points. Do not install antenna with the connectors facing upward.
Bottom View
Tilt indicator covered by a
transparent cap. Manual ad-
justment is accessed by re-
moving the cap. Knob color is
same as connectors.
For RET control, the cap must
be in place.
Location of the MDCU for
RET control
5863100
5863000 5863000G
REV0809 www.amphenol-jaybeam.com B-50
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | Dual Band VET | 65 | 16.5/18.1 dBi
880-960 / 1710-2170 MHz
Access Ports Description (Connectors)
The antenna has four connectors located at the bottom face, marked with colored rings.
Low Band (RED rings) 880-960 MHz ports 2 x 7/16 DIN Long Neck
High Band (BLUE rings) 1710-2170 MHz ports 2 x 7/16 DIN Long Neck
Electrical Characteristics Low Band (RED) High Band (BLUE)
Frequency band 880-960 MHz 1710-1880 MHz 1900-2170 MHz
Polarization 45 45
Horizontal beamwidth 65 65 64
Vertical beamwidth 9 6 6
Gain
0 downtilt
5 downtilt
10 downtilt
16.0-16.5 dBi
16.0-16.5 dBi
15.9-16.4 dBi
17.3-17.6 dBi
17.2-17.4 dBi
17.2-17.3 dBi
17.6-18.1 dBi
17.4-17.9 dBi
17.3-17.7 dBi
Electrical downtilt 0-10 0-10
Impedance 50 50
VSWR < 1.4 < 1.4
Upper sidelobe rejection 18 dB typical 18 dB typical
Front-to-Back ratio > 30 dB > 30 dB
Isolation between ports > 30 dB > 30 dB
Isolation between bands 45 dB typical 45 dB typical
IM3 (2x20W carrier) < -110 dBm < -110 dBm
Maximum power per port 200 W 160 W
Electrical Downtilt Control
Electrical downtilt can be controlled separately for low band and high band. The two tilt indicators are covered by a re-
movable transparent cap.
Manual control: A colored knob at the end of the tilt indicator allows change of the tilt without need for a tool. Knob
color is identical to connector colors as defined above. To access the knob, the cap is removed by turning it counter
clockwise. It is re-installed by opposite rotation.
Remote control: The remote control of the electrical tilt is managed by a module (MDCU) totally inserted at the bottom
of the antenna. One single module controls individually the tilt of each band (no need of daisy chain cables between the
bands). For RET control, the transparent cap must be in place and locked.
This module does not add any additional length at the bottom of the antenna. The tilt angle indicator stays always visible
and the antenna still has manual tilt control (manual override).
RET module part number MDCU-A0001 Compliant to AISG1.1
MDCU-G0001 Compliant to 3GPP/AISG2.0
Model number options:
5863100 Manual Electrical Tilt Antenna
5863000 Remote Electrical Tilt Antenna (AISG1.1)
5863000G Remote Electrical Tilt Antenna (3GPP/AISG2.0)
Dual band antenna, 4 connectors
Independent tilt on each band 0-10 / 0-10
Slimline profile for low wind load
MET and RET versions, AISG1.1 or 3GPP/AISG2.0
Single RET module to control all tilt angles
5863100
5863000 5863000G
B-51 www.amphenol-jaybeam.com REV0809
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
880-960 / 1710-2170 MHz
X-Pol | Dual Band VET | 65 | 16.5/18.1 dBi
Environmental
Operating temperature range -40 to +60 C -40 to +140 F
Environmental ETS 300 019
RoHS compliant Yes
Mechanical Characteristics
Dimensions HxWxD 1910 x 253 x 147 mm 75.2 x 10.0 x 5.8 in
Weight without brackets 16 kg 35 lbs
Survival wind speed 200 km/hr 124 mph
Operational wind speed 160 km/hr 100 mph
Wind load @ 160 km/hr (100 mph) Front: 413, Side: 347, Rear: 649 N Front: 93, Side: 78, Rear: 146 lbf
Shroud / Housing Outdoor plastic, RAL7035 / Aluminum
Packaging
Packing dimensions 2130 x 350 x 240 mm 83.9 x 13.8 x 9.4 in
Packing weight 23 kg 51 lbs
Packing volume 0.180 m
3
6.4 ft
3
Mounting Options (Installation accessories to be ordered separately)
Description: Part number: Fits pipe diameter: Weight:
Mounting bracket kit 0900181/00 48-115 mm 1.9-4.5 in 3.4 kg 7.5 lbs
Mounting bracket kit 0900182/00 70-150 mm 2.8-5.9 in 3.9 kg 8.6 lbs
Kit to add mech. downtilt (0-10) 0900188/00 --- 1.5 kg 3.3 lbs
Wall mount with azimuth pan 0900183/00 --- 1.6 kg 3.5 lbs
Wall mount with mech. tilt & az. pan 0900885/00 --- 3.3 kg 7.3 lbs
Installation
Do not install antenna with the connectors facing upward.
Bottom View
Tilt indicator covered by a
transparent cap. Manual ad-
justment is accessed by re-
moving the cap. Knob color is
same as connectors.
For RET control, the cap must
be in place.
Location of the MDCU for
RET control
5863903
5863803 5863803G
REV0809 www.amphenolantennas.com B-52
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | Dual Band VET TRIO | 65 | 16.5/18.0 dBi
With Individual Azimuth Panning (15)
880-960 / 1710-2170 MHz
General Description
The antenna contains three dual band antennas installed at 120 in a cylindrical shroud with 15 azimuth panning capa-
bility. A service area at the bottom allows access to the connectors and manual adjustments of the electrical downtilts
and azimuth panning.
Access Ports Description (Connectors)
Each sector has four connectors located inside the service area and marked with colored rings.
Low Band (RED rings) 880-960 MHz ports 2 x 7/16 DIN Long Neck
High Band (BLUE rings) 1710-2170 MHz ports 2 x 7/16 DIN Long Neck
Electrical Characteristics Low Band (RED) High Band (BLUE)
Frequency band 880-960 MHz 1710-1880 MHz 1900-2170 MHz
Polarization 45 45
Horizontal beamwidth 65 65 64
Vertical beamwidth 9 6 6
Gain
0 downtilt
5 downtilt
10 downtilt
16.0-16.5 dBi
16.0-16.5 dBi
15.9-16.4 dBi
17.3-17.6 dBi
17.2-17.4 dBi
17.2-17.3 dBi
17.6-18.1 dBi
17.4-17.9 dBi
17.3-17.7 dBi
Electrical downtilt 0-10 0-10
Impedance 50 50
VSWR < 1.4 < 1.4
Upper sidelobe rejection 18 dB typical 18 dB typical
Front-to-Back ratio > 30 dB > 30 dB
Isolation between ports > 30 dB > 30 dB
Isolation between bands 45 dB typical 45 dB typical
IM3 (2x20W carrier) < -110 dBm < -110 dBm
Maximum power per port 200 W 160 W
Electrical Downtilt Control
Electrical downtilt can be controlled separately for low band and high band. The two tilt indicators are covered by a re-
movable transparent cap.
Manual control: A colored knob at the end of the tilt indicator allows change of the tilt without need for a tool. Knob
color is identical to connector colors as defined above. To access the knob, the cap is removed by turning it counter
clockwise. It is re-installed by opposite rotation.
Remote control: The remote control of the electrical tilt is managed by a module (MDCU) totally inserted at the bottom
of the antenna. One single module controls individually the tilt of each band (no need of daisy chain cables between the
bands). For RET control, the transparent cap must be in place and locked.
This module does not add any additional length at the bottom of the antenna. The tilt angle indicator stays always visible
and the antenna still has manual tilt control (manual override).
RET module part number MDCU-A0001 Compliant to AISG1.1 (3 units included in 5880803)
MDCU-G0001 Compliant to 3GPP/AISG2.0 (3 units included in 5880803G)
Model number options:
5863903 Manual Electrical Tilt Antenna
5863803 Remote Electrical Tilt Antenna (AISG1.1)
5863803G Remote Electrical Tilt Antenna (3GPP/AISG2.0)
Tri-sector, monopole dual band antenna, 4 connectors
Independent tilt on each band 0-10 / 0-10
Independent azimuth panning 15 on each sector
MET and RET versions, AISG1.1 or 3GPP/AISG2.0
Very small diameter: 388 mm (15.3 in)
5863903
5863803 5863803G
B-53 www.amphenol-jaybeam.com REV0809
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
696-900 MHz
X-Pol | Dual Band VET TRIO | 65 | 16.5/18.0 dBi
With Individual Azimuth Panning (15)
Environmental
Operating temperature range -40 to +60 C -40 to +140 F
Environmental ETS 300 019
RoHS compliant Yes
Mechanical Characteristics
Overall Dimensions Height x Diameter 2291 x 388 mm 90.2 x 15.3 in
Weight 68 kg 150 lbs
Survival wind speed 200 km/hr 124 mph
Operational wind speed 160 km/hr 100 mph
Wind load @ 160 km/hr (100 mph) 428 N 96 lbf
Shroud / Housing Outdoor plastic, RAL7035 / Aluminum
Mounting Accessories (to be ordered separately)
Item: Description: Part Number:
TRIO extension / Mounting mast Height=85 cm (33.5 in), Diameter=388 mm (15.3 in)
Same outside material as antenna
Can house three TMAs
In line jumpers output TRX380-E085-001
Radial jumpers output TRX380-E085-002
TRIO-Pack: Antenna delivered with a non-penetrating platform Contact Us
Bottom View Inside Service Area Mounting Flange Interface
Six curved slots 11.5 mm (0.5) wide
on a 260 mm (10.2) diameter circle
5876100
5876000 5876001G
Access Ports Description (Connectors)
The antenna has six connectors located at the bottom face, marked with colored rings.
Low Band (RED rings) 880-960 MHz ports 2 x 7/16 DIN Long Neck
High Band (WHITE rings) 1710-2170 MHz ports 2 x 7/16 DIN Ultra Long Neck
High Band (BLUE rings) 1710-2170 MHz ports 2 x 7/16 DIN Long Neck
Electrical Characteristics Low Band (RED) High Band (WHITE) High Band (BLUE)
Frequency band 880-960 MHz 1710-1880 MHz 1900-2170 MHz 1710-1880 MHz 1900-2170 MHz
Polarization 45 45 45
Horizontal beamwidth 65 65 63 65 63
Vertical beamwidth 13 15 13 15 13
Gain - mid tilt 14.5 0.5 dBi 13.5 0.5 dBi 14.0 0.5 dBi 13.5 0.5 dBi 14.0 0.5 dBi
Electrical downtilt 0-14 0-10 0-10
Impedance 50 50 50
VSWR < 1.5 < 1.5 < 1.5
Upper sidelobe rejection 15 dB typical 15 dB typical 15 dB typical
Front-to-Back ratio > 22 dB > 25 dB > 25 dB
Isolation between ports > 25 dB > 25 dB > 25 dB
Isolation between bands > 35 dB > 35 dB > 35 dB
IM3 (2x20W carrier) < -110 dBm < -110 dBm < -110 dBm
Maximum power per port 200 W 160 W 160 W
Electrical Downtilt Control
Electrical downtilt can be controlled separately for low band (RED), high band (WHITE) and high band (BLUE). The three
tilt indicators are covered by a removable transparent cap.
Manual control: A colored knob at the end of the tilt indicator allows change of the tilt without need for a tool. Knob color
is identical to connector colors as defined above. To access the knob, the cap is removed by turning it counter clockwise.
It is re-installed by opposite rotation.
Remote control: The remote control of the electrical tilt is managed by a module (MDCU) totally inserted at the bottom
of the antenna. One single module controls individually the tilt of each band (no need of daisy chain cables between the
bands). For RET control, the transparent cap must be in place and locked.
This module does not add any additional length at the bottom of the antenna. The tilt angle indicator stays always visible
and the antenna still has manual tilt control (manual override).
RET module part number MDCU-A0002 Compliant to AISG1.1 (one unit included in 5876000)
MDCU-G0002 Compliant to 3GPP/AISG2.0 (one unit included in 5876001G)
REV0909 www.amphenol-jaybeam.com B-54
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
P
R
E
L
I
M
I
N
A
R
Y
XXX-Pol | VET Panel | 65 | 14.5 / 14.0 dBi
880-960 / 1710-2170 / 1710-2170 MHz
Model number options:
5880100 Manual Electrical Tilt Antenna
5880000 Remote Electrical Tilt Antenna (AISG1.1)
5880000G Remote Electrical Tilt Antenna (3GPP/AISG2.0)
Triple band antenna, dual polarization, 6 connectors
Independent tilt on each band 0-14 / 0-10 / 0-10
Slimline profile for low wind load
MET and RET versions, AISG1.1 or 3GPP/AISG2.0
Single RET module to control all tilt angles
5876100
5876000 5876001G
B-55 www.amphenol-jaybeam.com REV0909
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
880-960 / 1710-2170 / 1710-2170 MHz
XXX-Pol | VET Panel | 65 | 14.5 / 14.0 dBi
Environmental
Operating temperature range -40 to +60 C -40 to +140 F
Environmental ETS 300 019
RoHS compliant Yes
Mechanical Characteristics
Dimensions HxWxD 1500 x 253 x 147 mm 59.1 x 10.0 x 5.8 in
Weight without brackets 17 kg 37.5 lbs
Survival wind speed 200 km/hr 124 mph
Operational wind speed 160 km/hr 100 mph
Wind load @ 160 km/hr (100 mph) Front: 330 N Front: 74.2 lbf
Shroud / Housing Outdoor plastic, RAL7035
Mounting Options (Installation accessories to be ordered separately)
Description: Part number: Fits pipe diameter: Weight:
Mounting bracket kit 0900393/00 48-115 mm 1.9-4.5 in 5.1 kg 11 lbs
Installation
Always attach antenna by the three mounting points. Do not install with the connectors facing upward.
Bottom View
Tilt indicator covered by a
transparent cap. Manual ad-
justment is accessed by re-
moving the cap. Knob color is
same as connectors.
For RET control, the cap must
be in place.
Location of the MDCU for
RET control
P
R
E
L
I
M
I
N
A
R
Y
5880100
5880000 5880000G
Access Ports Description (Connectors)
The antenna has six connectors located at the bottom face, marked with colored rings.
Low Band (RED rings) 880-960 MHz ports 2 x 7/16 DIN Long Neck
High Band (WHITE rings)
1710-2170 MHz ports
Pattern optimized for DCS1800
2 x 7/16 DIN Ultra Long Neck
High Band (BLUE rings)
1710-2170 MHz ports
Pattern optimized for UMTS2100
2 x 7/16 DIN Long Neck
Electrical Characteristics Low Band (RED) High Band (WHITE) High Band (BLUE)
Frequency band 880-960 MHz 1710-1880 MHz 1900-2170 MHz 1710-1880 MHz 1900-2170 MHz
Polarization 45 45 45
Horizontal beamwidth 65 65 62 65 62
Vertical beamwidth 7 7 7 7 7
Gain
0 downtilt
5 downtilt
10 downtilt
17.0-17.5 dBi
17.0-17.5 dBi
16.9-17.4 dBi
16.5-16.7 dBi
16.3-16.5 dBi
16.0-16.3 dBi
16.7-17.2 dBi
16.5-17.0 dBi
16.3-16.5 dBi
16.5-16.9 dBi
16.4-16.7 dBi
16.3-16.5 dBi
16.9-17.3 dBi
16.7-17.2 dBi
16.5-17.0 dBi
Electrical downtilt 0-10 0-12 0-12
Impedance 50 50 50
VSWR < 1.4 < 1.4 < 1.4
Upper sidelobe rejection 18 dB typical 18 dB typical 18 dB typical
Front-to-Back ratio > 30 dB > 30 dB > 30 dB
Isolation between ports > 30 dB > 30 dB > 30 dB
Isolation between bands 45 dB typical 45 dB typical 45 dB typical
IM3 (2x20W carrier) < -110 dBm < -110 dBm < -110 dBm
Maximum power per port 200 W 160 W 160 W
Electrical Downtilt Control
Electrical downtilt can be controlled separately for low band (RED), high band (WHITE) and high band (BLUE). The three
tilt indicators are covered by a removable transparent cap.
Manual control: A colored knob at the end of the tilt indicator allows change of the tilt without need for a tool. Knob color
is identical to connector colors as defined above. To access the knob, the cap is removed by turning it counter clockwise.
It is re-installed by opposite rotation.
Remote control: The remote control of the electrical tilt is managed by a module (MDCU) totally inserted at the bottom
of the antenna. One single module controls individually the tilt of each band (no need of daisy chain cables between the
bands). For RET control, the transparent cap must be in place and locked.
This module does not add any additional length at the bottom of the antenna. The tilt angle indicator stays always visible
and the antenna still has manual tilt control (manual override).
RET module part number MDCU-A0002 Compliant to AISG1.1
MDCU-G0002 Compliant to 3GPP/AISG2.0
REV0809 www.amphenol-jaybeam.com B-56
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
XXX-Pol | VET Panel | 65 | 17.5 dBi
880-960 / 1710-2170 / 1710-2170 MHz
Model number options:
5880100 Manual Electrical Tilt Antenna
5880000 Remote Electrical Tilt Antenna (AISG1.1)
5880000G Remote Electrical Tilt Antenna (3GPP/AISG2.0)
Triple band antenna, 6 connectors
Independent tilt on each band 0-10 / 0-12 / 0-12
Slimline profile for low wind load
MET and RET versions, AISG1.1 or 3GPP/AISG2.0
Single RET module to control all tilt angles
5880100
5880000 5880000G
B-57 www.amphenol-jaybeam.com REV0809
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
880-960 / 1710-2170 / 1710-2170 MHz
XXX-Pol | VET Panel | 65 | 17.5 dBi
Environmental
Operating temperature range -40 to +60 C -40 to +140 F
Environmental ETS 300 019
RoHS compliant Yes
Mechanical Characteristics
Dimensions HxWxD 2690 x 253 x 147 mm 105.9 x 10.0 x 5.8 in
Weight without brackets 27.5 kg 61 lbs
Survival wind speed 200 km/hr 124 mph
Operational wind speed 160 km/hr 100 mph
Wind load @ 160 km/hr (100 mph) Front: 580, Side: 480, Rear: 910 N Front: 130, Side: 108, Rear: 205 lbf
Shroud / Housing Outdoor plastic, RAL7035 / Aluminum
Packaging
Packing dimensions 2930 x 350 x 240 mm 115.4 x 13.8 x 9.4 in
Packing weight 35 kg 77 lbs
Packing volume 0.246 m
3
8.7 ft
3
Mounting Options (Installation accessories to be ordered separately)
Description: Part number: Fits pipe diameter: Weight:
Mounting bracket kit 0900393/00 48-115 mm 1.9-4.5 in 5.1 kg 11 lbs
Mounting bracket kit 0900501/00 70-150 mm 2.8-5.9 in 5.8 kg 13 lbs
Kit to add mech. downtilt (0-10) 0900394/00 --- 3.1 kg 7 lbs
Wall mount with azimuth pan 0900395/00 --- 2.3 kg 5 lbs
Wall mount with mech. tilt & az. pan 0900533/00 --- 4.4 kg 10 lbs
Installation
Always attach antenna by the three mounting points. Do not install with the connectors facing upward.
Bottom View
Tilt indicator covered by a
transparent cap. Manual ad-
justment is accessed by re-
moving the cap. Knob color is
same as connectors.
For RET control, the cap must
be in place.
Location of the MDCU for
RET control
ANTENNA SOLUTIONS
5880110
5880010 5880010G
REV0809 www.amphenol-jaybeam.com B-58
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
XXX-Pol Diplexed | VET Panel | 65 | 17.3 dBi
696-900 MHz
Access Ports Description (Connectors)
The antenna has four connectors located at the bottom face, marked with colored rings.
Low Band (RED) and High Band (WHITE) are diplexed and share the same connectors.
Low Band (RED rings) 880-960 MHz ports
2 x 7/16 DIN Long Neck
High Band (WHITE rings)
1710-2170 MHz ports
Pattern optimized for DCS1800
High Band (BLUE rings)
1710-2170 MHz ports
Pattern optimized for UMTS2100
2 x 7/16 DIN Long Neck
Electrical Characteristics Low Band (RED) High Band (WHITE) High Band (BLUE)
Frequency band 880-960 MHz 1710-1880 MHz 1900-2170 MHz 1710-1880 MHz 1900-2170 MHz
Polarization 45 45 45
Horizontal beamwidth 65 65 62 65 62
Vertical beamwidth 7 7 7 7 7
Gain
0 downtilt
5 downtilt
10 downtilt
16.8-17.3 dBi
16.8-17.3 dBi
16.7-17.2 dBi
16.3-16.5 dBi
16.1-16.3 dBi
15.8-16.1 dBi
16.5-17.0 dBi
16.3-16.8 dBi
16.1-16.3 dBi
16.5-16.9 dBi
16.4-16.7 dBi
16.3-16.5 dBi
16.9-17.3 dBi
16.7-17.2 dBi
16.5-17.0 dBi
Electrical downtilt 0-10 0-12 0-12
Impedance 50 50 50
VSWR < 1.4 < 1.4 < 1.4
Upper sidelobe rejection 18 dB typical 18 dB typical 18 dB typical
Front-to-Back ratio > 30 dB > 30 dB > 30 dB
Isolation between ports > 30 dB > 30 dB > 30 dB
Isolation between bands 45 dB typical 45 dB typical 45 dB typical
IM3 (2x20W carrier) < -110 dBm < -110 dBm < -110 dBm
Maximum power per port 200 W 160 W 160 W
Electrical Downtilt Control
Electrical downtilt can be controlled separately for low band (RED), high band (WHITE) and high band (BLUE). The three
tilt indicators are covered by a removable transparent cap.
Manual control: A colored knob at the end of the tilt indicator allows change of the tilt without need for a tool. Knob
color is identical to connector colors as defined above. To access the knob, the cap is removed by turning it counter
clockwise. It is re-installed by opposite rotation.
Remote control: The remote control of the electrical tilt is managed by a module (MDCU) totally inserted at the bottom
of the antenna. One single module controls individually the tilt of each band (no need of daisy chain cables between the
bands). For RET control, the transparent cap must be in place and locked.
This module does not add any additional length at the bottom of the antenna. The tilt angle indicator stays always visible
and the antenna still has manual tilt control (manual override).
RET module part number MDCU-A0002 Compliant to AISG1.1
MDCU-G0002 Compliant to 3GPP/AISG2.0
Model number options:
5880110 Manual Electrical Tilt Antenna
5880010 Remote Electrical Tilt Antenna (AISG1.1)
5880010G Remote Electrical Tilt Antenna (3GPP/AISG2.0)
Triple band antenna, 4 connectors
Low Band and one High Band diplexed for common feeder sharing
Independent tilt on each band 0-10 / 0-12 / 0-12
Slimline profile for low wind load
MET and RET versions, AISG1.1 or 3GPP/AISG2.0
Single RET module to control all tilt angles
880-960 / 1710-2170 / 1710-2170 MHz
5880110
5880010 5880010G
B-59 www.amphenol-jaybeam.com REV0809
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
880-960 / 1710-2170 / 1710-2170 MHz
XXX-Pol Diplexed | VET Panel | 65 | 17.3 dBi
Environmental
Operating temperature range -40 to +60 C -40 to +140 F
Environmental ETS 300 019
RoHS compliant Yes
Mechanical Characteristics
Dimensions HxWxD 2690 x 253 x 147 mm 105.9 x 10.0 x 5.8 in
Weight without brackets 27.5 kg 61 lbs
Survival wind speed 200 km/hr 124 mph
Operational wind speed 160 km/hr 100 mph
Wind load @ 160 km/hr (100 mph) Front: 580, Side: 480, Rear: 910 N Front: 130, Side: 108, Rear: 205 lbf
Shroud / Housing Outdoor plastic, RAL7035 / Aluminum
Packaging
Packing dimensions 2930 x 350 x 240 mm 115.4 x 13.8 x 9.4 in
Packing weight 35 kg 77 lbs
Packing volume 0.246 m
3
8.7 ft
3
Mounting Options (Installation accessories to be ordered separately)
Description: Part number: Fits pipe diameter: Weight:
Mounting bracket kit 0900393/00 48-115 mm 1.9-4.5 in 5.1 kg 11 lbs
Mounting bracket kit 0900501/00 70-150 mm 2.8-5.9 in 5.8 kg 13 lbs
Kit to add mech. downtilt (0-10) 0900394/00 --- 3.1 kg 7 lbs
Wall mount with azimuth pan 0900395/00 --- 2.3 kg 5 lbs
Wall mount with mech. tilt & az. pan 0900533/00 --- 4.4 kg 10 lbs
Installation
Always attach antenna by the three mounting points. Do not install with the connectors facing upward.
Bottom View
Tilt indicator covered by a
transparent cap. Manual ad-
justment is accessed by re-
moving the cap. Knob color is
same as connectors.
For RET control, the cap must
be in place.
Location of the MDCU for
RET control
Electrical Characteristics
F9,8<,5*@ )(5+: 880-960 MHA 1710-1880 MHA 1900-2170 MHA
P63(90A(;065 D45C D45C D45C
H690A65;(3 ),(4>0+;/ (-3 +B) 80C 60C 60C
G(05 7.0 +B0 (4.9 +B+) 8.0 +B0 (5.9 +B+) 8.0 +B0 (5.9 +B+)
I47,+(5*, 50E
%"&!
G"M < 2.1:1
G"M (#? )(5+) < 1.5:1
PCN < 1.5:1
$M#" < 1.5:1
F965;-;6-B(*2 9(;06 > 20 +B
I:63(;065 ),;>,,5 769;: > 23 +B
I57<; 76>,9 25 & 4(? 7,9 769;
I57<; *655,*;69 ;@7, / L6*(;065 N F,4(3,, 0.504 F3@3,(+ 6- !G303
Mechanical Characteristics
D04,5:065: H?&?D 205 ? 221 ? 65 44 8.1 ? 8.7 ? 2.6 05
&,0./; 0.5 2. 1.1 3):
Mounting Options
M6<5;05. &(33 46<5; :;(5+(9+ - :;(053,:: :;,,3 73(;, 4 :*9,> /63,:
7691300
H690A65;(3 B 930 MHA H690A65;(3 B 1800 MHA H690A65;(3 B 2100 MHA
%,9;0*(3 B 930 MHA %,9;0*(3 B 1800 MHA %,9;0*(3 B 2100 MHA
!E%0909 >>>.(47/,563-1(@),(4.*64 B-60
<6;,+ 7,9-694(5*, 7(9(4,;,9: (9, 796=0+,+ ;6 6--,9 ;@70*(3 69 9(5., =(3<,: 653@ (5+ 4(@ =(9@ (: ( 9,:<3; 6- 5694(3 4(5<-(*;<905. (5+ 67,9(;065(3 *65+0;065:. E?;9,4, 67,9(;065(3
*65+0;065: (5+/69 :;9,:: 65 :;9<*;<9(3 :<7769;: 0: ),@65+ 6<9 *65;963. "<*/ *65+0;065: 4(@ 9,:<3; 05 +(4(., ;6 ;/0: 796+<*;. I4796=,4,5;: ;6 796+<*; 4(@ ), 4(+, >0;/6<; 56;0*,.
'-P63 B 80C/60C/60C B 7.0/8.0/8.0 +B0
880-960 / 1710-1880 / 1900-2170 MHA
#>6 >0+, )(5+ *96::,+ +0763,: D45C 763(90:(;065.
"4(33 7(5,3 >(33 46<5;,+ 05+669 (5+ 6<;+669 (7730*(;065:.
7825100
Electrical Characteristics
F9,8<,5*@ )(5+ 800-2700 MHA
63(90A(;065 %,9;0*(3
H690A65;(3 ),(4>0+;/ O450+09,*;065(3
%,9;0*(3 ),(4>0+;/ 50C
G(05 2.5 +B0
I47,+(5*, 50E
%#&"
800-960 MHA < 1.8:1
960-1710 MHA < 2.5:1
1710-2700 MHA < 1.8:1
I57<; 76>,9 50 &
C655,*;69 ;@7, / L6*(;065 N-F,4(3, / B6;;64
Mechanical Characteristics
D04,5:065: (L ? D)
175 ? 28 44 6.9 ? 1.1 05
I5*3<+05. *655,*;69: 205 ? 28 44 8.1 ? 1.1 05
&,0./; 0.12 2. 0.26 3):
&05+ 36(+ @ 160 24//9 (100 47/) 11 N 2.5 3)-
"(+64, *6369 &/0;,
M6<5;05. 05;,9-(*,
4 ? 3.444 (0.135 05) +0(. /63,: ,8<(33@ :7(*,+
65 ( 4144 (1.614 05) +0(. )63; *09*3,.
Mounting Options (9; N<4),9 F0;: 07, D0(.
M6<5;05. 20; 505-173-5-003 $50=,9:(3 >(33 / *,0305. 46<5; ---
M6<5;05. 20; '#L9254316 &(33 46<5; ---
M6<5;05. 20; '#L9254317 &(33 69 763, 46<5; 30-53 44
H690A65;(3 B 800-960 MHA H690A65;(3 B 1710-2170 MHA
%,9;0*(3 B 800-960 MHA %,9;0*(3 B 1710-2170 MHA
"E%0909 >>>.(47/,563-1(@),(4.*64 B-61
!<6;,+ 7,9-694(5*, 7(9(4,;,9: (9, 796=0+,+ ;6 6--,9 ;@70*(3 69 9(5., =(3<,: 653@ (5+ 4(@ =(9@ (: ( 9,:<3; 6- 5694(3 4(5<-(*;<905. (5+ 67,9(;065(3 *65+0;065:. E?;9,4, 67,9(;065(3
*65+0;065: (5+/69 :;9,:: 65 :;9<*;<9(3 :<7769;: 0: ),@65+ 6<9 *65;963. #<*/ *65+0;065: 4(@ 9,:<3; 05 +(4(., ;6 ;/0: 796+<*;. I4796=,4,5;: ;6 796+<*; 4(@ ), 4(+, >0;/6<; 56;0*,.
%-63 B O450 B 2.5 +B0
800-2700 MHA
$50=,9:(3
M6<5;05. K0;
(Drawings are not to scale.)
BMX065X13x000
Electrical Characteristics
Frequency bands 2400-2700 MHz
Polarization 45
Horizontal beamwidth 65
Vertical beamwidth 6
Gain 15.4 dBd / 17.5 dBi
Electrical downtilt 2 - 10
Impedance 50
VSWR < 1.37:1
1st upper sidelobe <-18 dB
Front-to-Back ratio >30 dB
Isolation between ports >25 dB
IM3 (2x20W carrier) < -153 dBc
Input power 2 x 300 W
Connector(s) 2 Ports / 7/16-DIN / Female / Bottom
Operating temperature -40 to +60 C (-40 to 140 F)
Mechanical Characteristics
Dimensions HxWxD 1372 x 170 x 100 mm 54.0 x 6.7 x 3.9 in
Weight without brackets 6.8 kg 15 lbs
Survival wind speed 241 km/hr 150 mph
Wind load @ 161 km/hr (100 mph) Front: 285 N Side: 166 N Front: 64 lbf Side: 37 lbf
Mounting Options Part Number Fits Pipe Diameter Weight
Pole mounting kit MKS02P01 50-115 mm 2.0-4.5 in 2.9 kg 6.5 lbs
Scissor tilt mounting kit MKS02T06 50-115 mm 2.0-4.5 in 3.8 kg 8.3 lbs
Bar tilt mounting kit MKS02T07 50-115 mm 2.0-4.5 in 3.9 kg 8.7 lbs
Concealment Options
UNICELL module
UNX14-14
UNX14-19
(Antenna + RET)
UNX20-14
UNX20-19
(Antenna + RET)
Azimuth Swivel 25 Azimuth Swivel 30 Azimuth Swivel
Elevation Tilt Fixed Elevation Fixed Elevation
Required Mounting Kit Included with Unicell UNX20-AZ
REV0809 www.amphenol-jaybeam.com B-62
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | VET Panel | 65 | 17.5 dBi
2400-2700 MHz
Replace x with the following electrical tilt options:
M - Manual Electrical Tilt = BMX065X13M000
R - Remote Electrical Tilt = BMX065X13R000
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
Horizontal 2 | Vertical 4 | Vertical
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
6 | Vertical 8 | Vertical 10 | Vertical
BMX090X13x000
Electrical Characteristics
Frequency bands 2400-2700 MHz
Polarization 45
Horizontal beamwidth 93
Vertical beamwidth 5.8
Gain 14.2 dBd / 16.3 dBi
Electrical downtilt 2 - 10
Impedance 50
VSWR < 1.37:1
1st upper sidelobe <-18 dB
Front-to-Back ratio >26 dB
Isolation between ports >25 dB
IM3 (2x20W carrier) < -153 dBc
Input power 2 x 300 W
Connector(s) 2 Ports / 7/16-DIN / Female / Bottom
Operating temperature -40 to +60 C (-40 to +140 F)
Mechanical Characteristics
Dimensions HxWxD 1372 x 170 x 100 mm 54.0 x 6.7 x 3.9 in
Weight without brackets 6.8 kg 15 lbs
Survival wind speed 241 km/hr 150 mph
Wind load @ 161 km/hr (100 mph) Front: 285 N Side: 166 N Front: 64 lbf Side: 37 lbf
Mounting Options Part Number Fits Pipe Diameter Weight
Pole mounting kit MKS02P01 50-115 mm 2.0-4.5 in 2.9 kg 6.5 lbs
Scissor tilt mounting kit MKS02T06 50-115 mm 2.0-4.5 in 3.8 kg 8.3 lbs
Bar tilt mounting kit MKS02T07 50-115 mm 2.0-4.5 in 3.9 kg 8.7 lbs
Concealment Options
UNICELL module
UNX14-14
UNX14-19
(Antenna + RET)
UNX20-14
UNX20-19
(Antenna + RET)
Azimuth swivel 25 30
Elevation tilt Fixed Fixed
FP mounting configuration Included UNX20-AZ
REV0809 www.amphenol-jaybeam.com B-63
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | VET Panel | 90 | 16.3 dBi
2400-2700 MHz
Replace x with the following electrical tilt options:
M - Manual Electrical Tilt = BMX090X13M000
R - Remote Electrical Tilt = BMX090X13R000
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
Horizontal 2 | Vertical 4 | Vertical
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
6 | Vertical 8 | Vertical 10 | Vertical
GSM3X75-13-A
REV0809 www.amphenol-jaybeam.com B-64
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | VET TRIO | 75 | 14.5 dBi
870-960 MHz
Electrical Characteristics
Frequency band 870-960 MHz
Polarization 45
Horizontal beamwidth 73 (5 each beam nominally)
Vertical beamwidth 14.5 (1.5)
Gain 14.5 dBi per sector
Electrical downtilt 2-12
Impedance 50
VSWR < 1.4:1
1st upper side lobe -16 dB typical
Inter-port isolation > 25 dB any pair of ports
IM3 (2x20W carrier) < -153 dBc
Maximum power per port 2 x 250 W per sector
Connector(s) 6 ports / 7/16 DIN / Female / Bottom
Operating temperature -40 to +140 F -40 to +140 F
Mechanical Characteristics
Overall Dimensions Height x Diameter
(less lightning finial)
1905 x 230 mm 75.0 x 9.1 in
Array Height 1350 mm 53.0 in
Access Panel Height x Diameter 430 x 230 mm 16.9 x 9.1 in
Lightning finial 220 x 8 mm 8.6 x 0.3 in
Weight - Antenna 20 kg 44 lbs
Weight - Adaptor TBD kg TBD lbs
Wind speed - Survival 200 km/hr 124 mph
Wind load @ 160 km/hr (100 mph) 345 N 77.6 lbf
Mounting
Mounting adaptor Integral base flange adaptor supplied
Horizontal Plane Vertical Plane
W85-13-x010
Electrical Characteristics 1710-2170 MHz
Frequency bands 1710-1880 MHz 1850-1990 MHz 1900-2170 MHz
Polarization 45 45 45
Horizontal beamwidth 85 85 85
Vertical beamwidth 7.3 6.8 6.3
Gain 14.1 dBd / 16.2 dBi 14.5 dBd / 16.6 dBi 15.9 dBd / 17.0 dBi
Electrical downtilt 0-10
Impedance 50
VSWR < 1.4:1
Upper sidelobe suppression < -16 dB
Front-to-Back ratio > 25 dB
Isolation between ports > 28 dB
IM3 (2x20W carrier) < -153 dBc
Input power 2 x 200 W
Connector(s) 2 Ports / 7/16-DIN / Female / Bottom
Operating temperature -40 to +60 C (-40 to +140 F)
Mechanical Characteristics
Dimensions HxWxD 1385 x 170 x 100 mm 54.5 x 6.7 x 3.9 in
Weight without brackets 7 kg 15.4 lbs
Survival wind speed > 241 km/hr > 150 mph
Wind load @ 161 km/hr (100 mph) Front: 288 N Side: 167 N Front: 65 lbf Side: 38 lbf
RET type / part number External / RETU-EA01
Mounting Options Part Number Fits Pipe Diameter Weight
Pole mounting kit MKS02P01 40-115 mm 2.0-4.5 in 2.9 kg 6.5 lbs
Scissor tilt mounting kit MKS02T06 40-115 mm 2.0-4.5 in 3.8 kg 8.3 lbs
Bar tilt mounting kit MKS02T07 40-115 mm 2.0-4.5 in 3.9 kg 8.7 lbs
Concealment Options
UNICELL module
UNX14-14
UNX14-19
(Antenna + RET)
UNX20-14
UNX20-19
(Antenna + RET)
Azimuth swivel 25 30
Elevation tilt Fixed Fixed
Required mounting kit Included UNX20-AZ
1800 MHz 1900 MHz 2100 MHz
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
Horizontal Horizontal Horizontal
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
0 | Vertical 0 | Vertical 0 | Vertical
REV0809 www.amphenol-jaybeam.com B-65
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | VET Panel | 85 | 17.0 dBi
1710-2170 MHz
Replace x with the following electrical tilt options:
A - Manual Electrical Tilt = W85-13-A010
R - Remote Electrical Tilt = W85-13-R010
W85-13-x10
1800 MHz 1900 MHz 2100 MHz
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
2 | Vertical 2 | Vertical 2 | Vertical
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
4 | Vertical 4 | Vertical 4 | Vertical
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
6 | Vertical 6 | Vertical 6 | Vertical
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
8 | Vertical 8 | Vertical 8 | Vertical
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
10 | Vertical 10 | Vertical 10 | Vertical
B-66 www.amphenol-jaybeam.com REV0809
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on -79structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
1710-2170 MHz
X-Pol | VET Panel | 85 | 17.0 dBi
W85-19-x28
Electrical Characteristics 1710-2170 MHz
Frequency bands 1710-1880 MHz 1850-1990 MHz 1900-2170 MHz
Polarization 45 45 45
Horizontal beamwidth 85 85 85
Vertical beamwidth 5.3 5.1 4.7
Gain 15.4 dBd / 17.5 dBi 15.7 dBd / 17.8 dBi 16.2 dBd / 18.3 dBi
Electrical downtilt 2 - 8
Impedance 50
VSWR < 1.4:1
Upper sidelobe suppression < -18 dB
Front-to-Back ratio > 25 dB
Isolation between ports > 28 dB
IM3 (2x20W carrier) < -153 dBc
Input power 2 x 200 W
Connector(s) 2 Ports / 7/16-DIN / Female / Bottom
Operating temperature -40 to +60 C (-40 to +140 F)
Mechanical Characteristics
Dimensions HxWxD 1935 x 170 x 100 mm 76.2 x 6.7 x 3.9 in
Weight without brackets 11.0 kg 24.3 lbs
Survival wind speed 241 km/hr 150 mph
Wind load @ 161 km/hr (100 mph) Front: 402 N Side: 234 N Front: 90 lbf Side: 53 lbf
RET type / part number External / RETU-EA01
Mounting Options Part Number Fits Pipe Diameter Weight
Pole mounting kit MKS02P01 40-115 mm 2.0-4.5 in 2.9 kg 6.5 lbs
Scissor tilt mounting kit MKS02T06 40-115 mm 2.0-4.5 in 3.8 kg 8.3 lbs
Bar tilt mounting kit MKS02T07 40-115 mm 2.0-4.5 in 3.9 kg 8.7 lbs
Concealment Options
UNICELL module
UNX14-19
(Antenna + RET)
UNX20-19
(Antenna + RET)
Azimuth swivel 25 30
Elevation tilt Fixed Fixed
Required mounting kit Included UNX20-AZ
1800 MHz 1900 MHz 2100 MHz
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
Horizontal Horizontal Horizontal
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
2 | Vertical 2 | Vertical 2 | Vertical
REV0809 www.amphenol-jaybeam.com B-67
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
X-Pol | VET Panel | 85 | 18.3 dBi
1710-2170 MHz
Replace x with the following electrical tilt options:
A - Manual Electrical Tilt = W85-19-A28
R - Remote Electrical Tilt = W85-19-R28
W85-19-x28
1800 MHz 1900 MHz 2100 MHz
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
4 | Vertical 4 | Vertical 4 | Vertical
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
6 | Vertical 6 | Vertical 6 | Vertical
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
30 25 20 15 5 10 35
-90
-60 -120
-150 -30
180 0
150
120
90
60
30
8 | Vertical 8 | Vertical 8 | Vertical
B-68 www.amphenol-jaybeam.com REV0809
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
1710-2170 MHz
X-Pol | VET Panel | 85 | 18.3 dBi
Amphenol
Telecom Solutions
PMR Antennas
- Table of Contents
ITEM CODE PAGE NUMBER
5001000 .. B-69
5004xxx .. B-70
5023xxx .. B-71
5029000 .. B-72
5043xxx .. B-73
5047xxx .. B-74
5201xxx .. B-75
5211388 .. B-76
5227000 .. B-77
5680000 .. B-78
7014385 .. B-79
7014xxx .. B-80
7018xxx .. B-81
7019xxx .. B-82
7029xxx .. B-83
7031xxx .. B-84
7034xxx .. B-85
7039xxx .. B-86
7040xxx .. B-87
7041xxx .. B-88
7042xxx .. B-89
7043xxx .. B-90
7047200 .. B-91
7047xxx .. B-92
7049xxx .. B-93
7050xxx .. B-94
7051xxx .. B-95
7073xxx .. B-96
7074xxx .. B-97
7129xxx .. B-98
7130xxx .. B-99
71482xx .. B-100
7148xxx .. B-101
7170xxx .. B-102
7175xxx .. B-103
7176xxx .. B-104
7177010 .. B-105
7210xxx .. B-106
7227000 .. B-107
7255xxx .. B-108
7256xxx .. B-109
7273xxx .. B-110
7277010 .. B-111
7323xxx .. B-112
7345000 .. B-113
7353xxx .. B-114
7360012 .. B-115
7373xxx .. B-116
7395xxx .. B-117
7417xxx .. B-118
7418xxx .. B-119
7421xxx .. B-120
7427xxx .. B-121
Amphenol
Telecom Solutions
PMR Antennas
- Table of Contents
ITEM CODE PAGE NUMBER
7428xxx .. B-122
7437010 .. B-123
7500xxx .. B-124
7501xxx .. B-125
7502xxx .. B-126
7511xxx .. B-127
7513xxx .. B-128
7530xxx .. B-129
7533xxx .. B-130
7536xxx .. B-131
7548xxx .. B-132
75492xx .. B-133
7549387 .. B-134
7549xxx .. B-135
7556xxx .. B-136
7576xxx .. B-137
7579000 .. B-138
7586307 .. B-139
75863xx .. B-140
7586xxx .. B-141
7636000 .. B-142
7680000 .. B-143
LPU/R-xx .. B-144
MA100K01 .. B-145
MA100LM01 .. B-146
MA100PQ01 .. B-147
MA100RS00 .. B-148
MA411xx .. B-149
MA412D00 .. B-150
MA421H06 .. B-151
MA421H08 .. B-152
MA421H29 .. B-153
MA421LM01 .. B-154
MA421LM02 .. B-155
MA421LM05 .. B-156
MA421PR01 .. B-157
MA421PR03 .. B-158
MA421PR04 .. B-159
MA421PR05 .. B-160
MA421PR06 .. B-161
MA421PR07 .. B-162
MA421RS01 .. B-163
MA421RS02 .. B-164
MA421RS03 .. B-165
MA421RS04 .. B-166
MA421RS05 .. B-167
MA421RS06 .. B-168
MA421RS07 .. B-169
MA431Exx .. B-170
MA431H00 .. B-171
MA431KMxx .. B-172
MA432H0x .. B-173
MA432H1x .. B-174
Amphenol
Telecom Solutions
PMR Antennas
- Table of Contents
ITEM CODE PAGE NUMBER
MA432H8x .. B-175
MA432J00 .. B-176
MA432KMxx .. B-177
MA461H01 .. B-178
MA462DS06 .. B-179
MA462DS08 .. B-180
MA481E86 .. B-181
MA481E41 .. B-182
MA481H02 .. B-183
MA481H04 .. B-184
MA481I00 .. B-185
MA481J00 .. B-186
MA481KMxx .. B-187
MA481Q02 .. B-188
MA481QS06 .. B-189
MA481S02 .. B-190
MA491QS10 .. B-191
MA521F00 .. B-192
MA521J00 .. B-193
MMU2xxx .. B-194
MMU3xxx .. B-195
MMU4xxx .. B-196
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-69 www.amphenol-jaybeam.com
REV0909
5001000
Ground Plane Antenna
V-Pol | 360 | 0 dBd
Vertical Pattern
Horizontal Pattern
112-156 MHz
Electrical Specifcations
Frequency: 112 MHz to 156 MHz
Gain: 0 dBd
VSWR: <1.5:1 (117-138 MHz), <2:1 (112-156 MHz)
Maximum Power: 500 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 90
Impedance: 50 ohms
Termination: N Female
Lightning Protection:
DC Grounded
Antenna remains intact following strike with
an action integral 2.5 x 10
5
Amp
2
second.
Mechanical Specifcations
Materials:
GRP covered radiator, Centre fed brass
dipole. Alocrom fnish Aluminium radial ring
and mounting stub (48.5 mm dia.), GRP
covered brass radials (6 off)
Dimensions:
Length 1.25 m
Width 0.77 m at radial tips
Weight (excluding mount): 3.5 kg
Windloading @ 45 m/s: 150 N
Mounting Bracket: 0300120/00
Please order Mounting Bracket separately.
A rugged and durable lightning proof VHF Ground Plane antenna designed for
VHF AIR BAND applications. The broadband active element is enclosed inside
a glassfbre shroud to provide extra protection in harsh environments.
Type 5001000
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-70 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency Range: 380...470 MHz
Model Numbers*:
5004380 380 MHz to 400 MHz
5004100 450 MHz to 470 MHz
Gain:
9.3 dBd @ 90
8.4 dBd @ 120
7.4 dBd @ 140
6.3 dBd @ 180
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: Adjustable to 90, 120, 140, or 180
Vertical Beamwidth: 19
Electrical Downtilt: Options available in 0 or 10
Front to Back Ratio:
25 dB @ 90
22 dB @ 120
21 dB @ 140
17 dB @ 180
Impedance: 50 ohms
Termination: N Female at base
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Radiator element, sealed in glass fbre tube
Refector assembly, polyester coated,
Aluminium
Dimensions (LxWxD): 2600 x 800 x 400 mm
Weight (excluding mount): 16 kg
Windloading @ 45 m/s: 800 N
Mounting Bracket: 9250-318
Please order Mounting Bracket separately.
5004xxx
Adjustable Grid Sector Antenna
V-Pol
90 / 120 / 140 / 180
9.3 / 8.4 / 7.4 / 6.3 dBd
Vertical Pattern
Horizontal Pattern
A medium gain, Adjustable Beamwidth antenna designed for TETRA network
applications. These antennas can be deployed as 90, 120, 140 or 160 degree
sector antennas or phased together to provide omnidirectional degree coverage
on a large structure. Produced to the highest quality standards these robust
designs will insure reliable operation in harsh environmental conditions.
380...470 MHz
Type 5004xxx
REV0909
www.amphenol-jaybeam.com B-71
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency: 380 MHz to 430 MHz
Gain: 9 dBd
VSWR: <1.3:1
Maximum Power: 2 x 200 W
Polarisation: 45
Horizontal Beamwidth: 80
Vertical Beamwidth: 28
Electrical Downtilt:
Model: Electrical Downtilt:
5023010 10
5023015 15
Port to Port Isolation: > 30 dB
Front to Back Ratio: > 20 dB
Intermodulation: <-153 dBc for 2 x 20W carriers
Impedance: 50 ohms
Termination: 2 x 7/16-DIN Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Shroud, Styrosun
Housing, Aluminium
Dimensions (LxWxD): 1500 x 400 x 195 mm
Weight (excluding mount): 14 kg
Windloading @ 45 m/s: 810 N
Mounting Bracket:
0900234/00 included to ft 48 -115 mm dia.
pipe and provide 0-10 mechanical tilt.
5023xxx
Panel Sector Antenna
Dual Polar
X-Pol | 80 | 9 dBd
Vertical Pattern
Horizontal Pattern
A medium gain, Dual Polarized, Panel antenna designed for TETRA network
applications. These aesthetically pleasing, low profle panel antennas are
available in a variety of fxed electrical beam tilts to facilitate network optimization.
Produced to the highest quality standards these robust designs will insure
reliable operation in harsh environmental conditions.
380-430 MHz
Type 5023xxx
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-72 www.amphenol-jaybeam.com
REV0909
5029000
Indoor/Microcell
Shark fn Panel Antenna
V-Pol | 115 | 2.9 dBd
800-2200 MHz
Vertical Pattern
Horizontal Pattern
Electrical Specifcations
Frequency: 800 MHz to 2200 MHz
Gain: 2.9 dBd (5 dBi)
VSWR: <2.0:1 (<1.5:1 typical)
Maximum Power: 50 W
Polarisation: Vertical
Horizontal Beamwidth: 115
Vertical Beamwidth: 70
Impedance: 50 ohms
Termination:
0.5 m RG303 Cable, White jacket ,
+ N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials: Aluminium base + white ABS shroud
Dimensions (LxWxD): 282 x 85 x 182 mm
Weight: 0.5 kg
Windloading @ 45 m/s: 70 N
Mounting Bracket: Screws supplied for mounting on fat wall.
A wideband, Shark Fin style panel antenna to provide indoor or outdoor fll-in
coverage for 2G and 3G cellular networks. This antenna is supplied with 0.5m
coaxial cable with N Type termination and is easily installed using the integrated
wall mounting.
Type 5029000
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-73 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency: 380 MHz to 430 MHz
Gain: 11.8 dBd
VSWR: <1.3:1 full band
Maximum Power: 2 x 250 W
Polarisation: 45
Horizontal Beamwidth: 80
Vertical Beamwidth: 19
Electrical Downtilt:
Model: Electrical Downtilt:
5043000 0
5043010 10
5043015 15
Port to Port Isolation: >30 dB
Front to Back Ratio: >24 dB (typical)
Intermodulation: <-153 dBc for 2 x 20W carriers
Impedance: 50 ohms
Termination: 2 x 7/16-DIN Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Shroud, Styrosun
Housing, Aluminium
Dimensions (LxWxD): 2000 x 400 x 195 mm
Weight (excluding mount): 17 kg
Windloading @ 45 m/s: 1000 N
Mounting Bracket:
0900234/00 included to ft 48 -115 mm dia.
pipe and provide 0-10 mechanical tilt.
5043xxx
Panel Sector Antenna
Dual Polar
X-Pol | 80 | 11.8 dBd
Vertical Pattern
Horizontal Pattern
A high gain, Dual Polarized, Panel antenna designed for TETRA network
applications. These aesthetically pleasing, low profle panel antennas are
available in a variety of fxed electrical beam tilts to facilitate network optimization.
Produced to the highest quality standards these robust designs will insure
reliable operation in harsh environmental conditions.
380-430 MHz
Type 5043xxx
REV0909
www.amphenol-jaybeam.com B-74
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
5047xxx
Indoor/Microcell
Panel Antenna
V-Pol | 106 | 2.4 dBd
380...430 MHz
Electrical Specifcations
Frequency Range: 380...430 MHz
Model Numbers*:
Model: Operating Frequency:
5047000 380 MHz to 400 MHz
5047420 410 MHz to 430 MHz
Gain: 2.4 dBd
VSWR: <1.5:1
Maximum Power: 50 W
Polarisation: Vertical
Horizontal Beamwidth: 106
Vertical Beamwidth: 112
Front to Back Ratio: >10 dB
Intermodulation: 3rd order 100 dBm with 2 x 5W carriers
Impedance: 50 ohms
Termination: 0.5 m white RG303 Cable + N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Aluminium housing,
Shroud, UV Resistant, Halogen free FR ABS
Colour White
UL94V-O, CAA No.8 Sec 2.2b
FAR 25.853b
Dimensions (LxWxD): 305 x 225 x 60 mm
Weight (including mount): 1.05 kg
Windloading @ 45 m/s: 85 N
Mounting Bracket: Integral Wall Mounting Bracket
A low profle, UHF panel antenna to provide indoor or outdoor fll-in coverage in
TETRA networks. This discrete antenna is supplied with 0.5m coaxial cable with
N Type termination and is easily installed using the integrated wall mounting.
Type 5047xxx
Vertical Pattern
Horizontal Pattern
REV0909
www.amphenol-jaybeam.com B-75
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Model Numbers:
Model: Operating Frequency:
5201000 380 MHz to 400 MHz
5201450
380 - 400 MHz (top) /
450 - 470 MHz (bottom)
Gain: 2.8 dBd per Array
VSWR: <1.4:1
Maximum Power: 2 x 300 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 36
Electrical Downtilt: 0
Port to Port Isolation: > 27 dB
Intermodulation: <-153 dBc for 2 x 20 W Carriers
Impedance: 50 ohms
Termination: 2 x 7/16-DIN Female
Lightning Protection:
DC Grounded. Antennas remain intact
following a lightning strike of 2.5 x 10
5
Amp
2
second. Finial 1/2 stainless steel extending
220 mm beyond top cap.
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 3160 mm
Weight (excluding mount): 7.0 kg
Windloading @ 45 m/s: 180 N
Mounting Bracket: 0300120/00
Please order Mounting Bracket separately.
5201xxx
Colinear Antenna
2 - i n - 1
V-Pol | 360 | 2.8 dBd
Vertical Pattern
Horizontal Pattern
A 2-in-1 heavy duty, lightning proof Colinear antenna designed for use in
TETRA networks. Two separate omnidirectional antennas are contained inside
a single high strength, glassfbre shroud. High port to port isolation between the
antennas allows for diversity. Produced to the highest quality standards these
robust antenna designs will insure reliable operation in harsh environmental
conditions.
380-470 MHz
Type 5201xxx
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-76 www.amphenol-jaybeam.com
REV0909
5211388
Indoor/Microcell
Ceiling Mounted Omni
V-Pol | 360 | 0 dBd
380-395 MHz
Electrical Specifcations
Frequency: 380 MHz to 395 MHz
Gain: 0 dBd
VSWR: <2:1
Maximum Power: 30 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 80
Impedance: 50 ohms
Termination: 0.5 m RG58 Cable + N Female
Mechanical Specifcations
Materials:
Aluminium base
Shroud, White ABS
Dimensions: 202 mm Dia. x 70 mm tall
Weight: 0.47 kg
Mounting Bracket:
By three holes with the screws and wall plugs
supplied with the antenna. Three white
caps are supplied to hide the screws after
installation.
An omnidirectional, low profle, fully shrouded UHF antenna for TETRA ceiling
mount applications. This antenna is supplied with 0.5m coaxial cable with N
Type termination.
Type 5211388
Vertical Pattern
Horizontal Pattern
REV0909
www.amphenol-jaybeam.com B-77
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
5227000
Shrouded Yagi Antenna
V-Pol or H-Pol | 28 | 16.1 dBi
Vertical Pattern
Horizontal Pattern
1350-1517 MHz
Electrical Specifcations
Frequency: 1350 MHz to 1517 MHz
Gain: 16.1 dBi
VSWR: <1.3:1
Maximum Power: 100 W
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: 28
Vertical Beamwidth: 26
Front to Back Ratio: >25 dB (typical)
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Shroud, GRP
Radiating Assembly, Aluminium
Mounting Section 50 mm dia., Aluminium
Length: 1300 mm
Weight (excluding mount): 3 kg
Windloading @ 45 m/s: 150 N
Recommended
Mounting Bracket:
3202078/68
Alternate
Mounting Bracket:
0300064/00 + U-Bolts to match
mounting pipe diameter.
Please order Mounting Bracket separately.
A Shrouded Yagi antenna for SHF Links in the 1.4GHz band. All elements are
enclosed in a weather resistant, glassfbre shroud to provide consistent, reliable
performance in all weather conditions.
Type 5227000
REV0909
www.amphenol-jaybeam.com B-78
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency Range: 1350 MHz to 1517 MHz
Gain: 14.0 dBi
VSWR: <1.3:1
Maximum Power: 100 W
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: 37
Vertical Beamwidth: 36
Front to Back Ratio: >25 dB
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Shroud, Stryosun
Housing, Aluminium
Dimensions (LxWxD): 345 x 310 x 50 mm
Weight (including mount): 2.5 kg
Windloading @ 45 m/s: 160 N
Mounting Bracket:
Integral Mounting Brackets to ft pipes up to
48mm diameter, allowing mechanical tilt over
8 to remove tower rake. Other brackets
available on request to ft pipes of up to
115mm diameter.
5680000
Directional Panel Antenna
V-Pol or H-Pol | 37 | 14 dBi
Vertical Pattern
Horizontal Pattern
A high gain, SHF Panel antenna designed for links in the 1.4GHz band. A
planar array of dipole elements concealed inside a low loss radome to provide
highly directional performance in a low profle design. Produced to the highest
quality standards these robust antenna designs will insure reliable operation in
harsh environmental conditions.
1350-1517 MHz
Type 5680000
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-79 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency: 370 MHz to 400 MHz
Bandwidth: 4% (typical)
Gain: 12 dBd
VSWR: <1.5:1
Maximum Power: 150 W
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: 36
Vertical Beamwidth: 33
Front to Back Ratio: >20 dB
Intermodulation: <-143 dBc for 2 x 20W carriers
Impedance: 50 ohms
Termination: 3m of RG213 Cable + N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Boom, 32 mm dia. Aluminium
Elements, 12.7 mm dia. Aluminium
Balun, Fully moulded enclosure
Length: 3160 mm @ 300 MHz, 2150 mm @ 460 MHz
Weight (excluding mount): 5.9 kg @ 300 MHz, 5 kg @ 460 MHz
Windloading @ 45 m/s: 207 N @ 300 MHz, 140 N @ 460 MHz
Recommended
Mounting Bracket:
3202078/68 + 3201079/00
Alternate
Mounting Brackets:
0900912/00 or
0302032/68 or
0300064/00 + U-Bolts to match
mounting pipe diameter.
Optional Mounting
Accessory:
Trombone 2-Point Mount
0900018/00
Please order Mounting Bracket separately.
7014385
Yagi Antenna
12-Element
V-Pol or H-Pol | 36 | 12 dBd
Vertical Pattern
Horizontal Pattern
A 12-element UHF Yagi antenna for PMR/Trunked Radio and Broadcast
applications that carries UK R.A. approval to MPT1411 for UHF Telemetry.
Antennas in this range are carefully designed to provide low passive
intermodulation to minimize network interference. Produced to the highest
quality standards these robust antenna designs will insure reliable operation in
harsh environmental conditions.
370-400 MHz
Type 7014385
REV0909
www.amphenol-jaybeam.com B-80
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency Range: 300...500 MHz
Bandwidth: 4% (typical)
Model Numbers*:
Model: Operating Frequency:
7014390 370 MHz to 400 MHz
7014450 450 MHz to 470 MHz
Gain: 12 dBd
VSWR: <1.5:1
Maximum Power: 150 W
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: 36
Vertical Beamwidth: 33
Front to Back Ratio: >20 dB
Impedance: 50 ohms
Termination: 3m of RG213 Cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Boom, 32 mm dia. Aluminium
Elements, 12.7 mm dia. Aluminium
Balun, Fully moulded enclosure
Length: 3160 mm @ 300 MHz, 2150 mm @ 460 MHz
Weight (excluding mount): 5.9 kg @ 300 MHz, 5 kg @ 460 MHz
Windloading @ 45 m/s: 207 N @ 300 MHz, 140 N @ 460 MHz
Recommended
Mounting Bracket:
3202078/68 + 3201079/00
Alternate
Mounting Brackets:
0900912/00 or
0302032/68 or
0300064/00 + U-Bolts to match
mounting pipe diameter.
Optional Mounting
Accessory:
Trombone 2-Point Mount
0900018/00
Please order Mounting Bracket separately.
7014xxx
Yagi Antenna
12-Element
V-Pol or H-Pol | 36 | 12 dBd
Vertical Pattern
Horizontal Pattern
A 12-element UHF Yagi antenna for PMR/Trunked Radio and Broadcast
applications that carries UK R.A. approval to MPT1411 for UHF Telemetry.
Produced to the highest quality standards these robust antenna designs will
insure reliable operation in harsh environmental conditions. Low IMP rated
models are available upon request.
300...500 MHz
Type 7014xxx
REV0909
www.amphenol-jaybeam.com B-81
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
7018xxx
Yagi Antenna
12-Element
V-Pol or H-Pol | 36 | 12 dBd
Vertical Pattern
Horizontal Pattern
300...500 MHz
Electrical Specifcations
Frequency Range: 300...500 MHz
Bandwidth: 4% (typical)
Model Numbers*:
Model: Operating Frequency:
7018395 375 MHz to 415 MHz
7018420 400 MHz to 435 MHz
7018450 450 MHz to 470 MHz
Gain: 12 dBd
VSWR: <1.5:1
Maximum Power: 150 W
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: 36
Vertical Beamwidth: 33
Front to Back Ratio: > 22 dB
Impedance: 50 ohms
Termination: 3m of RG213 cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Boom, 32 mm dia. Aluminium
Elements, 12.7 mm dia. Aluminium
Balun, Fully moulded enclosure
Length: 3200 mm @ 300 MHz, 2070 mm @ 460 MHz
Weight (excluding mount): 6.9 kg @ 300 MHz, 6 kg @ 460 MHz
Windloading @ 45 m/s: 230 N @ 300 MHz, 150 N @ 460 MHz
Recommended
Mounting Bracket:
3202078/68 + 3201079/00
Alternate
Mounting Brackets:
0900912/00 or
0302032/68 or
0300064/00 + U-Bolts to match
mounting pipe diameter.
Optional Mounting
Accessory:
Trombone 2-Point Mount
0900018/00
Please order Mounting Bracket separately.
A 12-element UHF Yagi antenna with High F/B ratio for PMR/Trunked Radio
and Broadcast applications that carries UK R.A. approval to MPT1411 for UHF
Telemetry applications. Produced to the highest quality standards these robust
antenna designs will insure reliable operation in harsh environmental conditions.
Low IMP rated models are available upon request.
Type 7018xxx
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-82 www.amphenol-jaybeam.com
REV0909
7019xxx
Yagi Antenna
18-Element
V-Pol or H-Pol | 28 | 14 dBd
Vertical Pattern
Horizontal Pattern
380...500 MHz
Electrical Specifcations
Frequency Range: 380...500 MHz
Bandwidth: 4% (typical)
Model Numbers*:
Model: Operating Frequency:
7019405 380 MHz to 412 MHz
7019443 413 MHz to 455 MHz
7019460 440 MHz to 470 MHz
Gain: 14 dBd
VSWR: <1.5:1
Maximum Power: 150 W
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: 28
Vertical Beamwidth: 27
Front to Back Ratio: >25 dB
Impedance: 50 ohms
Termination: 3m of RG213 Cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Boom, 32 mm dia. Aluminium
Elements, 12.7 mm dia. Aluminium
Balun, Fully moulded enclosure
Length: 4680 mm @ 380 MHz, 3800 mm @ 500 MHz
Weight (excluding mount): 10 kg @ 380 MHz, 9 kg @ 500 MHz
Windloading @ 45 m/s: 310 N @ 380 MHz, 260 N @ 500 MHz
Recommended
Mounting Bracket:
3202078/68 + 3201079/00
Alternate
Mounting Brackets:
0900912/00 or
0302032/68 or
0300064/00 + U-Bolts to match
mounting pipe diameter.
Optional Mounting
Accessory:
Trombone 2-Point Mount
0900018/00
Please order Mounting Bracket separately.
An 18-element UHF Yagi antenna with High F/B ratio for PMR/Trunked Radio
and Broadcast applications. Produced to the highest quality standards these
robust antenna designs will insure reliable operation in harsh environmental
conditions.
Type 7019xxx
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-83 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency Range: 50...250 MHz
Bandwidth: 5% (typical)
Model Numbers*:
Model: Operating Frequency:
7029068 68 MHz to 78 MHz
7029000 75 MHz to 88 MHz
7029092 92 MHz to 100 MHz
7029098 98 MHz to 106 MHz
7029106 102 MHz to 110 MHz
7029145 145 MHz to 165 MHz
7029155 155 MHz to 175 MHz
Gain: 7 dBd
VSWR: <1.5:1
Maximum Power: 150 W
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: 90
Vertical Beamwidth: 60
Front to Back Ratio: >15 dB
Impedance: 50 ohms
Termination: 3m of RG213 Cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Boom, 32 mm dia. Aluminium
Elements, 19 mm dia. Aluminium
Balun, Fully moulded enclosure
Length: 3500 mm @ 55 MHz, 1080 mm @ 240 MHz
Weight (excluding mount): 7.1 kg @ 55 MHz, 3.2 kg @ 240 MHz
Windloading @ 45 m/s: 480 N @ 55 Mhz, 130 N @ 240 MHz
Recommended
Mounting Bracket:
3202078/68 + 3201079/00
Alternate
Mounting Brackets:
0900912/00 or
0302032/68 or
0300064/00 + U-Bolts to match
mounting pipe diameter.
Please order Mounting Bracket separately.
7029xxx
Yagi Antenna
4-Element
V-Pol or H-Pol | 90 | 7 dBd
Vertical Pattern
Horizontal Pattern
A 4-element VHF Yagi antenna for PMR/Trunked Radio, Broadcast and
extended range VHF Aircraft Band applications. Produced to the highest quality
standards these robust antenna designs will insure reliable operation in harsh
environmental conditions.
50...250 MHz
Type 7029xxx
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-84 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency Range: 50...250 MHz
Bandwidth: 6% (typical)
Model Numbers*:
Model: Operating Frequency:
7031050 48 MHz to 53 MHz
7031066 66 MHz to 67 MHz
7031075 75 MHz to 88 MHz
7031088 88 MHz to 108 MHz
7031139 139.5 MHz to 149 MHz
7031144 144 MHz to 162 MHz
7031156 156 MHz to 175 MHz
Gain: 3 dBd
VSWR: <1.5:1
Maximum Power: 150 W
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: 150
Vertical Beamwidth: 75
Front to Back Ratio: >12 dB
Impedance: 50 ohms
Termination: 3m of RG213 Cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Boom, 32 mm dia. Aluminium
Elements, 19 mm dia. Aluminium
Balun, fully moulded enclosure
Length: 1800 mm @ 55 MHz, 850 mm @ 200 MHz
Weight (excluding mount): 4.2 kg @ 55 MHz, 1.9 kg @ 200 MHz
Windloading @ 45 m/s (N): 260 N @ 55 MHz, 90 N @ 200 MHz
Recommended
Mounting Bracket:
3202078/68 + 3201079/00
Alternate
Mounting Brackets:
0900912/00 or
0302032/68 or
0300064/00 + U-Bolts to match
mounting pipe diameter.
Please order Mounting Bracket separately.
7031xxx
Yagi Antenna
2-Element
V-Pol or H-Pol | 150 | 3 dBd
Vertical Pattern
Horizontal Pattern
A 2-element VHF Yagi antenna for PMR/Trunked Radio, Broadcast and
extended range VHF Aircraft Band applications. Produced to the highest quality
standards these robust antenna designs will insure reliable operation in harsh
environmental conditions.
50...250 MHz
Type 7031xxx
REV0909
www.amphenol-jaybeam.com B-85
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency Range: 48...200 MHz
Bandwidth: 2.5% (typical)
Model Numbers*:
Model: Operating Frequency:
7034048 48 MHz to 50 MHz
7034051 50 MHz to 52 MHz
7034070 70 MHz to 74 MHz
7034072 72 MHz to 76 MHz
7034074 74 MHz to 78 MHz
7034068 68 MHz to 72 MHz
7034078 78 MHz to 84 MHz
7034084 84 MHz to 89 MHz
7034093 91 MHz to 95 MHz
7034097 94 MHz to 100 MHz
7034101 98 MHz to 102 MHz
7034107 104 MHz to 110 MHz
7034164 164 MHz to 175 MHz
Gain: 0 dBd
VSWR: <1.5:1, <2.0:1 at band edges
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 80
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
*Other frequencies available upon request.
Mechanical Specifcations
Materials:
Polished Aluminium
with Stainless Steel Fixings
Length:
4300 mm @ 50 MHz
1460 mm @ 160 MHz
Weight (excluding mount):
3.2 kg @ 50 MHz
1.1 kg @ 160 MHz
Windloading @ 45 m/s:
113 N @ 50 MHz
36 N @ 160 MHz
Mounting Bracket: 0300120/00
Please order Mounting Bracket separately.
7034xxx
End Fed Dipole Antenna
V-Pol | 360 | 0 dBd
Vertical Pattern
Horizontal Pattern
A rugged and durable VHF End Fed Dipole antenna constructed from polished
Aluminium. Produced to the highest quality standards these robust antenna
designs will insure reliable operation in harsh environmental conditions.
48...200 MHz
Type 7034xxx
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-86 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency Range: 140...500 MHz
Bandwidth: 6% (typical)
Model Numbers*:
Model: Operating Frequency:
7039380 380 MHz to 420 MHz
7039420 420 MHz to 470 MHz
Gain: 3 dBd
VSWR: <1.5:1
Maximum Power: 150 W
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: 150
Vertical Beamwidth: 75
Front to Back Ratio: >12 dB
Impedance: 50 ohms
Termination: 3m of RG213 Cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Boom, 32 mm dia. Aluminium
Elements, 12.7 mm dia. Aluminium
Balun, Fully moulded enclosure
Length: 1360 mm @ 90 MHz, 690 mm @ 400 MHz
Weight (excluding mount): 2.3 kg @ 90 MHz, 1.3 kg @ 400 MHz
Windloading @ 45 m/s: 140 N @ 90 MHz, 50 N @ 400 MHz
Recommended
Mounting Bracket:
3202078/68 + 3201079/00
Alternate
Mounting Brackets:
0900912/00 or
0302032/68 or
0300064/00 + U-Bolts to match
mounting pipe diameter.
Please order Mounting Bracket separately.
7039xxx
Yagi Antenna
2-Element
V-Pol or H-Pol | 150 | 3 dBd
Vertical Pattern
Horizontal Pattern
A 2-element VHF / UHF Yagi antenna for PMR/Trunked Radio, Broadcast and
extended range VHF Aircraft Band applications. Produced to the highest quality
standards these robust antenna designs will insure reliable operation in harsh
environmental conditions. Low IMP rated models are available upon request.
140...500 MHz
Type 7039xxx
Note: Low frequency model shown. Higher frequency
antennas will have multi bar refectors.
REV0909
www.amphenol-jaybeam.com B-87
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency Range: 300...500 MHz
Bandwidth: 5% (typical)
Model Numbers*:
Model: Operating Frequency:
7040380 380 MHz to 430 MHz
7040440 440 MHz to 470 MHz
Gain: 5 dBd
VSWR: <1.5:1
Maximum Power: 150 W
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: 120
Vertical Beamwidth: 70
Front to Back Ratio: >15 dB
Impedance: 50 ohms
Termination: 3m of RG213 Cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Boom, 32 mm dia. Aluminium
Elements, 12.7 mm dia. Aluminium
Balun, Fully moulded enclosure
Length: 1700 mm @ 100 MHz, 550 mm @ 480 MHz
Weight (excluding mount): 2.6 kg @ 100 MHz, 1.6 kg @ 480 MHz
Windloading @ 45 m/s: 160 N @ 100 MHz, 52 N @ 480 MHz
Recommended
Mounting Bracket:
3202078/68 + 3201079/00
Alternate
Mounting Brackets:
0900912/00 or
0302032/68 or
0300064/00 + U-Bolts to match
mounting pipe diameter.
Please order Mounting Bracket separately.
7040xxx
Yagi Antenna
3-Element
V-Pol or H-Pol | 120 | 5 dBd
Vertical Pattern
Horizontal Pattern
A 3-element UHF Yagi antenna for PMR/Trunked Radio and Broadcast
applications. Produced to the highest quality standards these robust antenna
designs will insure reliable operation in harsh environmental conditions. Low
IMP rated models are available upon request.
300...500 MHz
Type 7040xxx
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-88 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency Range: 300...500 MHz
Bandwidth: 5% (typical)
Model Numbers*:
Model: Operating Frequency:
7041380 380 MHz to 420 MHz
7041420 420 MHz to 470 MHz
Gain: 7 dBd
VSWR: <1.5:1
Maximum Power: 150 W
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: 90
Vertical Beamwidth: 60
Front to Back Ratio: >15 dB
Impedance: 50 ohms
Termination: 3m of RG213 Cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Boom, 32 mm dia. Aluminium
Elements, 12.7 mm dia. Aluminium
Balun, Fully moulded enclosure
Length: 2200 mm @ 100 MHz, 800 mm @ 480 MHz
Weight (excluding mount): 3.2 kg @ 100 MHz, 1.5 kg @ 480 MHz
Windloading @ 45 m/s: 204 N @ 100 MHz, 65 N @ 480 MHz
Recommended
Mounting Bracket:
3202078/68 + 3201079/00
Alternate
Mounting Brackets:
0900912/00 or
0302032/68 or
0300064/00 + U-Bolts to match
mounting pipe diameter.
Please order Mounting Bracket separately.
7041xxx
Yagi Antenna
4-Element
V-Pol or H-Pol | 90 | 7 dBd
Vertical Pattern
Horizontal Pattern
A 4-element UHF Yagi antenna for PMR/Trunked Radio and Broadcast
applications. Produced to the highest quality standards these robust antenna
designs will insure reliable operation in harsh environmental conditions. Low
IMP rated models are available upon request.
300...500 MHz
Type 7041xxx
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-89 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency Range: 130...500 MHz
Bandwidth: 5% (typical)
Model Numbers*:
Model: Operating Frequency:
7042140 140 MHz to 156 MHz
7042155 155 MHz to 175 MHz
7042390 370 MHz to 410 MHz
7042450 440 MHz to 470 MHz
Gain: 8.5 dBd
VSWR: <1.5:1
Maximum Power: 150 W
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: 64
Vertical Beamwidth: 56
Front to Back Ratio: >16 dB
Impedance: 50 ohms
Termination: 3m of RG213 Cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Boom, 32 mm dia. Aluminium
Elements, 12.7 mm dia. Aluminium
Balun, Fully moulded enclosure
Dimensions: 3800 mm @ 100 MHz, 2700 mm @ 145 MHz
Weight (excluding mount): 6.2 kg @ 100 MHz, 5 kg @ 145 MHz
Windloading @ 45 m/s: 290 N @ 100 MHz, 200 N @ 145 MHz
Recommended
Mounting Bracket:
3202078/68 + 3201079/00
Alternate
Mounting Brackets:
0900912/00 or
0302032/68 or
0300064/00 + U-Bolts to match
mounting pipe diameter.
Please order Mounting Bracket separately.
7042xxx
Yagi Antenna
6-Element
V-Pol or H-Pol | 64 | 8.5 dBd
Vertical Pattern
Horizontal Pattern
A 6-element VHF / UHF Yagi antenna for PMR/Trunked Radio and Broadcast
applications. Produced to the highest quality standards these robust antenna
designs will insure reliable operation in harsh environmental conditions. Low
IMP rated models are available upon request.
130...500 MHz
Type 7042xxx
REV0909
www.amphenol-jaybeam.com B-90
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency Range: 130...500 MHz
Bandwidth: 5% (typical)
Model Numbers*:
Model: Operating Frequency:
7043150 145 MHz to 165 MHz
7043155 155 MHz to 175 MHz
7043390 380 MHz to 410 MHz
7043420 420 MHz to 470 MHz
Gain: 10 dBd
VSWR: <1.5:1
Maximum Power: 150 W
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: 54
Vertical Beamwidth: 45
Front to Back Ratio: >20 dB
Impedance: 50 ohms
Termination: 3m of RG213 Cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Boom, 32 mm dia. Aluminium
Elements, 12.7 mm dia. Aluminium
Balun, Fully moulded enclosure
Length: 3410 mm @ 155 MHz, 2030 mm @ 300 MHz
Weight (excluding mount): 6 kg @ 155 MHz, 4.5 kg @ 300 MHz
Windloading @ 45 m/s: 250 N @ 155 MHz, 140 N @ 300 MHz
Recommended
Mounting Bracket:
3202078/68 + 3201079/00
Alternate
Mounting Brackets:
0900912/00 or
0302032/68 or
0300064/00 + U-Bolts to match
mounting pipe diameter.
Please order Mounting Bracket separately.
7043xxx
Yagi Antenna
8-Element
V-Pol or H-Pol | 54 | 10 dBd
Vertical Pattern
Horizontal Pattern
An 8-element VHF / UHF Yagi antenna for PMR/Trunked Radio and Broadcast
applications. Produced to the highest quality standards these robust antenna
designs will insure reliable operation in harsh environmental conditions. Low
IMP rated models are available upon request.
130...500 MHz
Type 7043xxx
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-91 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency Range: 380 MHz to 430 MHz
Gain: 5.0 dBd Omni / 9.0 Directional
VSWR: <1.5:1 typical
Maximum Power: 200 W
Polarisation: Vertical
Horizontal Beamwidth: 360 Omni / 150 Directional
Vertical Beamwidth: 20
Electrical Downtilt 0
Intermodulation: <-143 dBc for 2 x 20W carriers
Impedance: 50 ohms
Termination: 4m RG214 cable + 7/16-DIN Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Centre fed folded dipoles, (with baluns)
fxed on a one piece vertical boom. Dipoles
are able to be rotated on the boom to allow
for omni or directional mode.
Dimensions (LxWxD): 2600 x 132 x 110 mm
Weight (excluding mount): 7.0 kg
Windloading @ 45 m/s: 190 N
Mounting Bracket: 0300120/00
Please order Mounting Bracket separately.
7047200
4 Stack Dipole Array
V-Pol | 360 / 150 | 5 dBd / 9 dBd
Vertical Pattern
Horizontal Pattern
An array of four Center Fed Dipole antennas with phasing harness mounted
on an Aluminium mast designed for TETRA network applications. Antennas
in this range are carefully designed to provide low passive intermodulation to
minimize network interference. Produced to the highest quality standards these
robust antenna designs will insure reliable operation in harsh environmental
conditions.
380-430 MHz
Type 7047200
REV0909
www.amphenol-jaybeam.com B-92
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency: 380...500 MHz
Model Numbers*:
Model: Operating Frequency:
7047410 380 MHz to 430 MHz
7047419 400 MHz to 440 MHz
7047450 440 MHz to 470 MHz
7047475 450 MHz to 500 MHz
Gain: 5.0 dBd Omni / 9.0 dBd Directional
VSWR: <1.5:1 typical
Maximum Power: 200 W
Polarisation: Vertical
Horizontal Beamwidth: 360 Omni / 150 Directional
Vertical Beamwidth: 17
Electrical Downtilt 0
Impedance: 50 ohms
Termination: 3m RG213 cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Centre fed folded dipoles, (with baluns)
fxed on a one piece vertical boom. Dipoles
are able to be rotated on the boom to allow
for omni or directional mode.
Dimensions (LxWxD): 2500 x 132 x 110 mm
Weight (excluding mount): 5.5 kg
Windloading @ 45 m/s: 180 N
Mounting Bracket: 0300120/00
Please order Mounting Bracket separately.
7047xxx
4 Stack Dipole Array
V-Pol | 360 / 150 | 5 dBd / 9 dBd
Vertical Pattern
Horizontal Pattern
An array of four Center Fed Dipole antennas with phasing harness mounted on
an aluminium mast designed for TETRA network applications. The antenna can
be deployed as a directional or omnidirectional antenna by adjusting the dipole
orientation around the mast. Produced to the highest quality standards these
robust antenna designs will insure reliable operation in harsh environmental
conditions. Low IMP rated models are available upon request.
380...500 MHz
Type 7047xxx
REV0909
www.amphenol-jaybeam.com B-93
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency Range: 50...250 MHz
Bandwidth: 6% (typical)
Model Numbers*:
Model: Operating Frequency:
7049066 66 MHz to 76 MHz
7049075 75 MHz to 88 MHz
7049098 88 MHz to 108 MHz
7049145 144 MHz to 165 MHz
7049000 155 MHz to 175 MHz
Gain: 5 dBd
VSWR: <1.5:1
Maximum Power: 150 W
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: 120
Vertical Beamwidth: 70
Front to Back Ratio: >15 dB
Impedance: 50 ohms
Termination: 3m of RG213 Cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Boom, 32 mm dia. Aluminium
Elements, 19 mm dia. Aluminium
Balun, Fully moulded enclosure
Length: 2800 mm @ 55 MHz, 900 mm @ 240 MHz
Weight (excluding mount): 5.8 kg @ 55 MHz, 2 kg @ 240 MHz
Windloading @ 45 m/s: 385 N @ 55 MHz, 95 N @ 240 MHz
Recommended
Mounting Bracket:
3202078/68 + 3201079/00
Alternate
Mounting Brackets:
0900912/00 or
0302032/68 or
0300064/00 + U-Bolts to match
mounting pipe diameter.
Please order Mounting Bracket separately.
7049xxx
Yagi Antenna
3-Element
V-Pol or H-Pol | 120 | 5 dBd
Vertical Pattern
Horizontal Pattern
A 3-element VHF Yagi antenna for PMR/Trunked Radio, Broadcast and
extended range VHF Aircraft Band applications. Produced to the highest quality
standards these robust antenna designs will insure reliable operation in harsh
environmental conditions.
50...250 MHz
Type 7049xxx
REV0909
www.amphenol-jaybeam.com B-94
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency Range: 48...250 MHz
Bandwidth: 10% (typical)
Model Numbers*:
Model: Operating Frequency:
7050002 48 MHz to 52 MHz
7050078 68 MHz to 90 MHz
7050088 88 MHz to 108 MHz
7050118 118 MHz to 136 MHz
7050135 135 MHz to 160 MHz
7050140 145 MHz to 180 MHz
7050170 176 MHz to 210 MHz
7050225 210 MHz to 240 MHz
Gain:
0 dBd (omni)
Will depend on mounting distance from mast.
VSWR: <1.5:1
Maximum Power: 150 W
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: Will depend on mounting distance from mast.
Vertical Beamwidth: 80
Impedance: 50 ohms
Termination: 3m of RG213 cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Boom, 32 mm dia. Aluminium
Elements, 19 mm dia. Aluminium
Balun, fully moulded enclosure
Dimensions (LxWxD): 1700 x 1370 x 110 mm @ 80 MHz
Weight (excluding mount): 2.8 kg @ 80 MHz
Windloading @ 45 m/s: 134 N @ 80 MHz
Recommended
Mounting Brackets:
3202078/68 + 3201079/00
Alternate
Mounting Brackets:
0900912/00 or
0302032/68 or
0300064/00 + U-Bolts to match
mounting pipe diameter.
Please order Mounting Bracket separately.
7050xxx
Centre Fed Dipole Antenna
V-Pol or H-Pol | Variable Az
Variable Gain
Vertical Pattern
Horizontal Pattern
A VHF Center Fed Dipole antenna for PMR/Trunked Radio, Broadcast and VHF
Aircraft Band applications. Multiple dipoles can be mounted on a tower and
connected with a phasing harness to form a high gain, stacked array. Produced
to the highest quality standards these robust antenna designs will insure reliable
operation in harsh environmental conditions.
48...250 MHz
Type 7050xxx
REV0909
www.amphenol-jaybeam.com B-95
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency Range: 300...500 MHz
Bandwidth: 10% (typical)
Model Numbers*:
Model: Operating Frequency:
7051400 380 MHz to 430 MHz
7051420 420 MHz to 470 MHz
Gain:
0 dBd (omni)
Will depend on mounting distance from mast.
VSWR: <1.5:1
Maximum Power: 150 W
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: Will depend on mounting distance from mast.
Vertical Beamwidth: 80
Impedance: 50 ohms
Termination: 3m of RG213 cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Boom, 32 mm dia. Aluminium
Elements, 12 mm dia. Aluminium
Balun, fully moulded enclosure
Dimensions (LxWxD): 915 x 330 x 100 mm @ 400 MHz
Weight (excluding mount): 1.75 kg @ 400 MHz
Windloading @ 45 m/s: 69 N @ 400 MHz
Recommended
Mounting Bracket:
3202078/68 + 3201079/00
Alternate
Mounting Brackets:
0900912/00 or
0302032/68 or
0300064/00 + U-Bolts to match
mounting pipe diameter.
Please order Mounting Bracket separately.
7051xxx
Centre Fed Dipole Antenna
V-Pol or H-Pol | Variable Az
Variable Gain
Vertical Pattern
Horizontal Pattern
A UHF Center Fed Dipole antenna for PMR/Trunked Radio and UHF Aircraft
Band applications. Multiple dipoles can be mounted on a tower and connected
with a phasing harness to form a high gain, stacked array. Produced to the
highest quality standards these robust antenna designs will insure reliable
operation in harsh environmental conditions.
300...500 MHz
Type 7051xxx
REV0909
www.amphenol-jaybeam.com B-96
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency Range: 140...250 MHz
Bandwidth: 2% (typical)
Model Numbers*:
Model: Operating Frequency:
7073154 150 MHz to 158 MHz
7073159 154.2 MHz to 164.3 MHz
7073164 160 MHz to 168 MHz
7073169 166 MHz to 173 MHz
Gain: 5.5 dBd
VSWR: <1.5:1
Maximum Power: 200 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 18
Electrical Downtilt: 0
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 5180 mm
Weight (excluding mount): 6.5 kg
Windloading @ 45 m/s: 260 N
Mounting Bracket: 0300120/00
Please order Mounting Bracket separately.
7073xxx
Colinear Antenna
V-Pol | 360 | 5.5 dBd
Vertical Pattern
Horizontal Pattern
A rugged and durable Colinear antenna designed for VHF Trunked Radio
applications. These antennas are housed inside a high-strength, glassfbre
shroud and manufactured to the highest quality standards insuring long term,
reliable operation.
140...250 MHz
Type 7073xxx
REV0909
www.amphenol-jaybeam.com B-97
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency Range: 130...175 MHz
Bandwidth: 3% (typical)
Model Numbers*:
Model: Operating Frequency:
7074160 158 MHz to 162 MHz
7074163 162 MHz to 165 MHz
7074166 164 MHz to 168 MHz
7074170 167.6 MHz to 172.4 MHz
Gain: 3 dBd
VSWR: <1.5:1
Maximum Power: 200 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 31
Electrical Downtilt: 0
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 3050 mm
Weight (excluding mount): 2.7 kg
Max Wind Speed: 250 km/hr
Windloading @ 45 m/s: 117 N
Mounting Bracket: 0300120/00
Please order Mounting Bracket separately.
7074xxx
Colinear Antenna
V-Pol | 360 | 3 dBd
Vertical Pattern
Horizontal Pattern
A rugged and durable VHF Colinear antenna housed inside a high-strength,
glassfbre shroud. Produced to the highest quality standards these robust antenna
designs will insure reliable operation in harsh environmental conditions.
130...175 MHz
Type 7074xxx
REV0909
www.amphenol-jaybeam.com B-98
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency Range: 380...500 MHz
Bandwidth: 9% (typical)
Model Numbers*:
Model: Operating Frequency:
7129405 380 MHz to 430 MHz
7129400 400 MHz to 470 MHz
Gain: 10 dBd
VSWR: <1.5:1
Maximum Power: 150 W
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: 35
Vertical Beamwidth: 55
Front to Back Ratio: >25 dB
Impedance: 50 ohms
Termination: 3m of RG213 Cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Booms, 32mm dia. Aluminium
Elements, 12mm dia. Aluminium
Balun, Fully moulded enclosure
Dimensions (WxHxD): 1500 x 700 x 600 mm @ 400 MHz
Weight (excluding mount): 16.5 kg @ 400 MHz
Windloading @ 45 m/s: 510 N @ 400 MHz
Mounting Bracket: 0300120/00
Please order Mounting Bracket separately.
7129xxx
Corner Refector Antenna
V-Pol or H-Pol | 35 | 10 dBd
Vertical Pattern
Horizontal Pattern
A UHF Corner Refector antenna designed for TETRA networks. This antenna
provides approximately the same gain as an 8-Element Yagi antenna but with
improved F/B ratio and reduced sidelobes in the horizontal plane. Produced to
the highest quality standards these robust antenna designs will insure reliable
operation in harsh environmental conditions.
380...500 MHz
Type 7129xxx
REV0909
www.amphenol-jaybeam.com B-99
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency Range: 88...175 MHz
Bandwidth: 5% (typical)
Model Numbers*:
Model: Operating Frequency:
7130088 88 MHz to 108 MHz
7130165 158 MHz to 172 MHz
Gain: 8.5 dBd
VSWR: <1.5:1
Maximum Power: 150 W
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: 64
Vertical Beamwidth: 56
Front to Back Ratio: > 17 dB
Impedance: 50 ohms
Termination: 3m of RG213 Cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Boom, 38 mm dia. Aluminium
Elements, 19 mm dia. Aluminium
Balun, Fully moulded enclosure
Dimensions (LxWxD): 4000 x 1730 x 120 mm @ 100 MHz
Weight (excluding mount): 10.7 kg @ 100 MHz
Windloading @ 45 m/s: 410 N @ 100 MHz
Recommended
Mounting Bracket:
3202078/68 + 3901719/00
Alternate
Mounting Brackets:
0300064/00 + U-Bolts to match
mounting pipe diameter.
Please order Mounting Bracket separately.
7130xxx
Yagi Antenna
6-Element - Heavy Duty
V-Pol or H-Pol | 64 | 8.5 dBd
Vertical Pattern
Horizontal Pattern
A 6-element Heavy Duty VHF Yagi antenna for high power Broadcast and
extended range VHF Aircraft Band applications. Produced to the highest quality
standards these robust antenna designs will insure reliable operation in harsh
environmental conditions
88...175 MHz
Type 7130xxx
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-100 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency: 380 MHz to 430 MHz
Gain: 9.0 dBd
VSWR: <1.5:1
Maximum Power: 200 W
Polarisation: Vertical
Horizontal Beamwidth: 160
Vertical Beamwidth: 17
Electrical Downtilt:
Model: Electrical Downtilt:
7148200 0
7148205 5
7148210 10
7148215 15
Intermodulation: <-143 dBc for 2 x 20W carriers
Impedance: 50 ohms
Termination: 4m of RG214 cable + 7/16-DIN Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Centre fed folded dipoles, (with baluns) fxed
on a one piece vertical boom.
Dimensions (LxWxD): 2600 x 132 x 110 mm
Weight (excluding mount): 7.0 kg
Windloading @ 45 m/s: 190 N
Mounting Bracket: 0300120/00
Please order Mounting Bracket separately.
71482xx
4 Stack Dipole Array
V-Pol | 160 | 9 dBd
Vertical Pattern
Horizontal Pattern
An array of four Center Fed Dipole antennas with phasing harness mounted
on an Aluminium mast designed for TETRA network applications. Antennas
in this range are carefully designed to provide low passive intermodulation to
minimize network interference. Produced to the highest quality standards these
robust antenna designs will insure reliable operation in harsh environmental
conditions.
380-430 MHz
Type 71482xx
REV0909
www.amphenol-jaybeam.com B-101
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
7148xxx
4 Stack Dipole Array
V-Pol | 160 | 9 dBd
Vertical Pattern
Horizontal Pattern
380...470 MHz
Electrical Specifcations
Frequency: 380...470 MHz
Model Number*:
Model: Operating Frequency:
7148000 420 MHz to 470 MHz
Gain: 9.0 dBd
VSWR: <1.5:1
Maximum Power: 200 W
Polarisation: Vertical
Horizontal Beamwidth: 160
Vertical Beamwidth: 17
Electrical Downtilt:
0
Also available in 5, 10, or 15
Impedance: 50 ohms
Termination: 3m of RG213 cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Centre fed folded dipoles, (with baluns) fxed
on a one piece vertical boom.
Dimensions (LxWxD): 2600 x 132 x 110 mm
Weight (excluding mount): 7.0 kg
Windloading @ 45 m/s: 190 N
Mounting Bracket: 0300120/00
Please order Mounting Bracket separately.
An array of four Center Fed Dipole antennas with phasing harness mounted
on an Aluminium mast designed for TETRA network applications. Produced to
the highest quality standards these robust antenna designs will insure reliable
operation in harsh environmental conditions.
Type 7148xxx
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-102 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency Range: 100...470 MHz
Bandwidth:
1.5% (typical)
Wide band versions available to meet specifc
needs
Model Numbers*:
Model: Operating Frequency:
7170108 106 MHz to 110 MHz
7170130 139.5 MHz to 149 MHz
7170169 167 MHz to 172 MHz
7170190 192 MHz to 208 MHz
7170435 428 MHz to 433 MHz
7170460 450 MHz to 470 MHz
Gain: 2.8 dBd
VSWR: <1.5:1
Maximum Power: 150 W
Polarisation: Vertical
Horizontal Beamwidth: 180
Vertical Beamwidth: 75
Front to Back Ratio: > 20 dB
Impedance: 50 ohms
Termination: 3m of RG213 cable + N Female
Lighting Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Boom, 32 mm dia. Aluminium
Elements, 19 mm dia. Aluminium
Balun, Fully moulded enclosed
Dimensions (LxWxD): 2100 x 900 x 100 mm @ 150 MHz
Weight (excluding mount): 5.5 kg @ 150 MHz
Windloading @ 45 m/s: 190 N @ 150 MHz
Recommended
Mounting Bracket:
3202078/68 + 3201079/00
Alternate
Mounting Brackets:
0900912/00 or
0302032/68 or
0300064/00 + U-Bolts to match
mounting pipe diameter.
Please order Mounting Bracket separately.
7170xxx
Cardiod Dipole Array Antenna
V-Pol | 180 | 2.8 dBd
Vertical Pattern
Horizontal Pattern
A linear array of two VHF dipole elements with phasing harness mounted on
an Aluminium boom. Careful attention to element phasing results in a Cardiod
shaped radiation pattern with high F/B ratio compared to an equivalent sized Yagi
antenna. Antennas of this type fne use in PMR/Trunked Radio and Broadcast
applications needing very high F/B performance. Produced to the highest
quality standards these robust antenna designs will insure reliable operation in
harsh environmental conditions.
100...470 MHz
Type 7170xxx
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-103 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency Range: 440...960 MHz
Bandwidth: 5% (typical)
Model Numbers*:
Model: Operating Frequency:
7175872 820 MHz to 900 MHz
7175890 870 MHz to 960 MHz
Gain: 10 dBd
VSWR: <1.5:1
Maximum Power: 150 W
Polarisation: Linear, Vertical, or Horizontal
Horizontal Beamwidth: 52
Vertical Beamwidth: 48
Front to Back Ratio: >20 dB
Impedance: 50 ohms
Termination: 3m of RG213 Cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Boom, 25 mm dia. Aluminium
Elements, 10 mm dia. Aluminium
Balun, Parabeam slot radiator
Length: 990 mm
Weight (excluding mount): 1.7 kg
Windloading @ 45 m/s: 55 N
Recommended
Mounting Bracket:
3202078/68 + 0900174/00
Alternate
Mounting Brackets:
0302063/68 + 0900174/00 or
0302032/68 + 0900174/00
Please order Mounting Bracket separately.
7175xxx
Yagi Antenna
8-Element
Linear, V-Pol, or H-Pol | 52 | 10 dBd
Vertical Pattern
Horizontal Pattern
An 8-element UHF Yagi antenna for UHF Broadcast, TETRA and Cellular
communications applications utilizing Jaybeams Parabeam slot radiator feed
design to achieve higher directivity than comparable models. Produced to
the highest quality standards these robust antenna designs will insure reliable
operation in harsh environmental conditions.
440...960 MHz
Type 7175xxx
REV0909
www.amphenol-jaybeam.com B-104
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
7176xxx
Yagi Antenna
18-Element
V-Pol or H-Pol | 25 | 14.4 dBd
Vertical Pattern
Horizontal Pattern
470...960 MHz
Electrical Specifcations
Frequency Range: 470...960 MHz
Bandwidth: 5% (typical)
Model Numbers*:
Model: Operating Frequency:
7176500 471 MHz to 523 MHz
7176550 505 MHz to 581 MHz
7176580 550 MHz to 610 MHz
7176648 600 MHz to 685 MHz
7176665 630 MHz to 700 MHz
7176680 640 MHz to 711 MHz
7176755 720 MHz to 790 MHz
7176870 820 MHz to 900 MHz
7176890 870 MHz to 960 MHz
Gain: 14.4 dBd
VSWR: <1.5:1
Maximum Power: 150 W
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: 25
Vertical Beamwidth: 23
Front to Back Ratio: > 20 dB
Impedance: 50 ohms
Termination: 3m of RG213 cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Boom, 25 mm dia. Aluminium
Elements, 10 mm dia. Aluminium
Balun, Parabeam slot radiator
Length: 2500 mm @ 700 MHz
Weight (excluding mount): 3.3 kg @ 700 MHz
Windloading @ 45 m/s: 171 N @ 700 MHz
Recommended
Mounting Bracket:
3202078/68 + 0900174/00
Alternate
Mounting Brackets:
0302063/68 + 0900174/00 or
0302032/68 + 0900174/00
Please order Mounting Bracket separately.
An 18-element UHF Yagi antenna for Broadcast, TETRA and Cellular
communications applications utilizing Jaybeams Parabeam slot radiator feed
design to achieve higher directivity than comparable models. Produced to
the highest quality standards these robust antenna designs will insure reliable
operation in harsh environmental conditions.
Type 7176xxx
REV0909
www.amphenol-jaybeam.com B-105
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
7177010
Wideband Discone Antenna
V-Pol | 360 | 0 dBd
Vertical Pattern
Horizontal Pattern
100-500 MHz
Electrical Specifcations
Frequency: 100 MHz to 500 MHz
Gain: 0 dBd
VSWR:
<2.5:1 over full band
<2:1 typical over VHF and UHF air band
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 80
Impedance: 50 ohms
Termination: N Female on RG213 Coaxial Downlead
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Elements, Solid Aluminium rod
Spine, Aluminium tube
Finish, Alochrom
Dimensions: 900 mm Height x 1140 mm Dia.
Weight (excluding mount): 4.5 kg
Windloading @ 45 m/s: 180 N
Recommended
Mounting Bracket:
0900964/00
Alternate
Mounting Bracket:
0300066/00
Please order Mounting Bracket separately.
A Wideband Discone antenna commonly used for ground-to-air and frequency
scanning applications. The discone element design provides reliable
communications over an extremely wide operating bandwidth.
Type 7177010
REV0909
www.amphenol-jaybeam.com B-106
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency Range: 68...230 MHz
Bandwidth: 5% (typical)
Model Numbers*:
Model: Operating Frequency:
7210090 90 MHz to 100 MHz
7210101 95 MHz to 108 MHz
7210132 127 MHz to 137 MHz
Gain: 7.5 dBd
VSWR: <1.5:1
Maximum Power:
300 W (750 W option)
Please call for ordering details on options.
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: 90
Vertical Beamwidth: 60
Front to Back Ratio: > 15 dB
Impedance: 50 ohms
Termination: 3m of RG213 Cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Boom, 49 mm dia. Aluminium
Elements, 19 mm dia. Aluminium
Balun, Epoxy potted, Polyester enclosure
Dimensions (LxWxD): 2900 x 1370 x 120 mm @100 MHz
Weight (excluding mount): 10 kg @ 100 MHz
Windloading @ 45 m/s: 360 kg @ 100 MHz
Mounting Bracket:
0300064/00 + U-Bolts to match
mounting pipe diameter.
Please order Mounting Bracket separately.
7210xxx
Yagi Antenna
4-Element - Heavy Duty
V-Pol or H-Pol | 90 | 7.5 dBd
Vertical Pattern
Horizontal Pattern
A 4-element Heavy Duty VHF Yagi antenna for high power PMR/Trunked Radio,
Broadcast and extended range VHF Aircraft Band applications. Produced to
the highest quality standards these robust antenna designs will insure reliable
operation in harsh environmental conditions.
68...230 MHz
Type 7210xxx
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-107 www.amphenol-jaybeam.com
REV0909
7227000
Shrouded Yagi Antenna
V-Pol or H-Pol | 26 | 17 dBi
Vertical Pattern
Horizontal Pattern
1427-1530 MHz
Electrical Specifcations
Frequency: 1427 MHz to 1530 MHz
Gain: 17.0 dBi
VSWR: <1.3:1
Maximum Power: 100 W
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: 26
Vertical Beamwidth: 25
Front to Back Ratio: >25 dB
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Shroud, GRP
Radiating Assembly, Aluminium
Mounting Section 50 mm dia., Aluminium
Length: 1360 mm
Weight (excluding mount): 3 kg
Windloading @ 45 m/s: 150 N
Recommended
Mounting Bracket:
3202078/68
Alternate
Mounting Bracket:
0300064/00 + U-Bolts to match
mounting pipe diameter.
Please order Mounting Bracket separately.
A Shrouded Yagi antenna for SHF Links in the 1.4GHz band. All elements are
enclosed in a weather resistant, glassfbre shroud to provide consistent, reliable
performance in all weather conditions.
Type 7227000
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-108 www.amphenol-jaybeam.com
REV0909
7255xxx
4 Stack Dipole Array
V-Pol | 360 / 150 | 5 dBd / 9 dBd
144...175 MHz
Electrical Specifcations
Frequency Range: 144...175 MHz
Bandwidth: 6% (typical)
Model Numbers*:
Model: Operating Frequency:
7255149 144 MHz to 151 MHz
7255151 147 MHz to 156 MHz
7255150 153 MHz to 165 MHz
7255162 157 MHz to 167 MHz
Gain: 5 dBd Omni / 9 dBd Directional
VSWR: <1.5:1
Maximum Power: 300 W
Polarisation: Vertical
Vertical Beamwidth: 17
Horizontal Beamwidth: 360 Omni / 150 Directional
Electrical Downtilt:
0
Other downtilt options are available.
Impedance: 50 ohms
Termination: RG213 coaxial cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Construction:
Centre fed folded dipoles, (with baluns)
fxed on a one piece vertical boom.
Main Boom is 65 mm dia.
Length: 6000 mm @ 155 MHz
Weight (excluding mount): 28 kg @ 155 MHz
Windloading @ 45 m/s: 730 N @ 155 MHz
Mounting Bracket: 0300235/00
Please order Mounting Bracket separately.
An array of four Center Fed Dipole antennas with phasing harness mounted
on an Aluminium mast for extended range PMR/Trunked Radio applications.
Produced to the highest quality standards these robust antenna designs will
insure reliable operation in harsh environmental conditions.
Type 7255xxx
Vertical Pattern
Horizontal Pattern
TYPICAL DIRECTIONAL PATTERNS:
REV0909
www.amphenol-jaybeam.com B-109
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency Range: 68...156 MHz
Bandwidth:
1.5% (typical)
Wide band versions available to meet specifc
needs
Model Numbers*:
Model: Operating Frequency:
7256097 95.5 MHz to 98.5 MHz
7256100 99.2 MHz to 101.7 MHz
7256102 100.5 MHz to 102.7 MHz
7256106 104 MHz to 107.2 MHz
7256108 106.6 MHz to 109.4 MHz
Gain: 3.0 dBd
VSWR: <1.5:1
Maximum Power: 300 W
Polarisation: Vertical
Horizontal Beamwidth: 180
Vertical Beamwidth: 76
Front to Back Ratio: > 20 dB
Impedance: 50 ohms
Termination: 3.5m of RG213 cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Boom, 49 mm dia. Aluminium
Elements, 19 mm dia. Aluminium
Balun, Epoxy potted, Polyester enclosed
Dimensions (LxWxD): 2500 x 1350 x 110 mm @ 100 MHz
Weight (excluding mount): 10 kg @ 100 MHz
Windloading @ 45 m/s: 330 N @ 100 MHz
Mounting Bracket:
0300064/00 + U-Bolts to match
mounting pipe diameter.
Please order Mounting Bracket separately.
7256xxx
Cardiod Dipole Array Antenna
Heavy Duty
V-Pol | 180 | 3 dBd
Vertical Pattern
Horizontal Pattern
A linear array of two VHF dipole elements with phasing harness mounted on
an aluminium boom. Careful attention to element phasing results in a Cardiod
shaped radiation pattern with high F/B ratio compared to an equivalent sized Yagi
antenna. Antennas of this type fne use in PMR/Trunked Radio and Broadcast
applications needing very high F/B performance. Produced to the highest
quality standards these robust antenna designs will insure reliable operation in
harsh environmental conditions.
68...156 MHz
Type 7256xxx
REV0909
www.amphenol-jaybeam.com B-110
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency Range: 110...138 MHz
Bandwidth: 1% (typical)
Model Numbers*:
Model: Operating Frequency:
7273122 120 MHz to 124 MHz
7273126 124 MHz to 126 MHz
7273129 127 MHz to 131 MHz
7273131 130 MHz to 133 MHz
7273135 133 MHz to 137 MHz
Gain: 4.5 dBd
VSWR: <1.5:1
Maximum Power: 200 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 30
Electrical Downtilt: 0
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 5600 mm
Weight (excluding mount): 7 kg
Windloading @ 45 m/s: 260 N
Mounting Bracket: 0300120/00
Please order Mounting Bracket separately.
7273xxx
Colinear Antenna
V-Pol | 360 | 4.5 dBd
Vertical Pattern
Horizontal Pattern
A rugged and durable Colinear antenna designed for VHF AIR BAND radio
systems. These antennas are housed inside a high-strength, glassfbre shroud
and manufactured to the highest quality standards insuring long term, reliable
operation.
110...138 MHz
Type 7273xxx
REV0909
www.amphenol-jaybeam.com B-111
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
7277010
Wideband Discone Antenna
V-Pol | 360 | 0 dBd
225-400 MHz
Electrical Specifcations
Frequency Range: 225 MHz to 400 MHz
Gain: 0 dBd
VSWR: <1.5:1 typical
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 80
Impedance: 50 ohms
Termination: N Female on RG213 Coaxial Down lead
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Elements, Solid Aluminium
Finish, Alochrom
Dimensions: 590 mm Height x 730 mm Dia.
Weight (excluding mount): 3.0 kg
Windloading @ 45 m/s: 91 N
Recommended
Mounting Bracket:
0900964/00
Alternate
Mounting Bracket:
0300066/00
Please order Mounting Bracket separately.
A rugged and durable Wideband Discone antenna for UHF AIR BAND
applications. This design provides low VSWR and stable pattern performance
over a wide operating bandwidth. Produced to the highest quality standards
these robust antenna designs will insure reliable operation in harsh environmental
conditions.
Type 7277010
Vertical Pattern
Horizontal Pattern
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-112 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency Range: 68...225 MHz
Bandwidth: 10% (typical)
Model Numbers*:
Operating
Frequency:
Maximum Power: Termination:
7323075
7323098
7323118
7323144
7323150
70-81 MHz
88-108 MHz
118-137 MHz
136-152 MHz
143-156 MHz
300 W
3m of RG213
cable +
N-Female
7323100 88-108 MHz 750 W
1/2 Supefex
cable +
N-Female
Gain:
0 dBd (omni)
Will depend on mounting distance from mast.
VSWR: <1.5:1
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: Will depend on mounting distance from mast.
Vertical Beamwidth: 80
Impedance: 50 ohms
Lightning Protection: DC Grounded
*Other frequencies available upon request.
Mechanical Specifcations
Materials:
Boom, 49 mm dia. Aluminium
Elements, 19 mm/38 mm dia. Aluminium tube
Balun, epoxy potted polyester enclosure
Dimensions (LxWxD): 2000 x 1195 x 120 mm @ 120 MHz
Weight (excluding mount): 6.7 kg @ 120 MHz
Windloading @ 45 m/s: 205 N @ 100 MHz
Mounting Bracket:
0300064/00 + U-Bolts to match
mounting pipe diameter.
Please order Mounting Bracket separately.
7323xxx
Centre Fed Dipole Antenna
Heavy Duty
V-Pol or H-Pol | Variable Az
Variable Gain
Vertical Pattern
Horizontal Pattern
A Heavy Duty, VHF Center Fed Dipole antenna for PMR/Trunked Radio,
Broadcast and VHF Aircraft Band applications. Multiple dipoles can be mounted
on a tower and connected with a phasing harness to form a high gain, stacked
array. Produced to the highest quality standards these robust antenna designs
will insure reliable operation in harsh environmental conditions.
68...225 MHz
Type 7323xxx
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-113 www.amphenol-jaybeam.com
REV0909
7345000
Scanning Antenna
H-Pol | 360 | 3 dBd
Vertical Pattern
Horizontal Pattern
450-470 MHz
Electrical Specifcations
Frequency: 450 MHz to 470 MHz
Bandwidth: 20
Gain: 3 dBd
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Horizontal
Horizontal Beamwidth: 360
Vertical Beamwidth: 35
Impedance: 50 ohms
Termination: 3m of RG213 Cable + N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Construction:
Centre fed folded dipole fxed on a one piece
vertical boom.
Boom dia. is 38 mm.
Length: 1800 mm
Weight (excluding mount): 8 kg
Windloading @ 45 m/s: 200 N
Mounting Bracket: 0300120/00
Please order Mounting Bracket separately.
A horizontally polarized array of dipole elements with phasing harness mounted
on an Aluminium mast designed for UHF scanning telemetry systems. This
carefully designed antenna has been approved for the UK R.A. MPT1411 band.
Produced to the highest quality standards these robust antenna designs will
insure reliable operation in harsh environmental conditions.
Type 7345000
REV0909
www.amphenol-jaybeam.com B-114
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency Range: 68...230 MHz
Bandwidth: 5% (typical)
Model Numbers*:
Model: Operating Frequency:
7353102 98.1 MHz to 108 MHz
7353122 122.3 MHz (center)
7353168 165 MHz to 171 MHz
7353200 192 MHz to 208 MHz
Gain: 3.3 dBd
VSWR: <1.5:1
Maximum Power:
300 W (750 W option)
Please call for ordering details on options.
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: 150
Vertical Beamwidth: 75
Front to Back Ratio: > 15 dB
Impedance: 50 ohms
Termination: 3m of RG213 Cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Boom, 49 mm dia. Aluminium
Elements, 19 mm dia. Aluminium
Balun, Epoxy potted, Polyester enclosure
Dimensions (LxWxD): 2900 x 1650 x 120 mm @ 100 MHz
Weight (excluding mount): 6 kg @ 100 MHz
Windloading @ 45 m/s: 210 N @ 100 MHZ
Mounting Bracket:
0300064/00 + U-Bolts to match
mounting pipe diameter.
Please order Mounting Bracket separately.
7353xxx
Yagi Antenna
2-Element - Heavy Duty
V-Pol or H-Pol | 150 | 3.3 dBd
Vertical Pattern
Horizontal Pattern
A 2-element Heavy Duty VHF Yagi antenna for high power PMR/Trunked Radio,
Broadcast and extended range VHF Aircraft Band applications. Produced to
the highest quality standards these robust antenna designs will insure reliable
operation in harsh environmental conditions.
68...230 MHz
Type 7353xxx
REV0909
www.amphenol-jaybeam.com B-115
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency: 2300 MHz to 2500 MHz
Gain: 17.0 dBi
VSWR: <1.3:1
Maximum Power: 100 W
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: 26
Vertical Beamwidth: 24
Front to Back Ratio: > 20 dB
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Shroud, GRP
Radiating Assembly, Brass
Mounting Section 50 mm dia., Aluminium
Length: 1000 mm
Weight (excluding mount): 1.7 kg
Windloading @ 45 m/s: 91 N
Recommended
Mounting Bracket:
3202078/68
Alternate
Mounting Bracket:
0300064/00 + U-Bolts to match
mounting pipe diameter.
Please order Mounting Bracket separately.
7360012
Shrouded Yagi Antenna
V-Pol or H-Pol | 26 | 17 dBi
Vertical Pattern
Horizontal Pattern
A Shrouded Yagi antenna for Links in the 2.3 2.5 GHz band. All elements are
enclosed in a weather resistant, glassfbre shroud to provide consistent, reliable
performance in all weather conditions.
2300-2500 MHz
Type 7360012
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-116 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency Range: 68...110 MHz
Bandwidth: 1% (typical)
Model Numbers*:
Model: Operating Frequency:
7373100 99.5 MHz to 101.5 MHz
7373104 102.7 MHz to 105.3 MHz
7373106 104.8 MHz to 107.5 MHz
7373108 106.8 MHz to 109.8 MHz
Gain: 3 dBd
VSWR: <1.5:1
Maximum Power: 200 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 36
Electrical Downtilt: 0
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 6000 mm
Weight (excluding mount): 7.0 kg
Windloading @ 45 m/s: 260 N
Mounting Bracket: 0300120/00
Please order Mounting Bracket separately.
7373xxx
Colinear Antenna
V-Pol | 360 | 3 dBd
Vertical Pattern
Horizontal Pattern
A rugged and durable VHF Colinear antenna housed inside a high-strength,
glassfbre shroud. Produced to the highest quality standards these robust antenna
designs will insure reliable operation in harsh environmental conditions.
68...110 MHz
Type 7373xxx
REV0909
www.amphenol-jaybeam.com B-117
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency: 420...470 MHz
Model Numbers*:
Model: Operating Frequency:
7395433 420 MHz to 450 MHz
7395460 450 MHz to 470 MHz
Gain: 6 dBd
VSWR: <1.5:1
Maximum Power: 150
Polarisation: Circular
Half Power Beamwidth: 80
Front to Back Ratio: > 16 dB
Impedance: 50 ohms
Termination: 2m of RG213 Cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials: Aluminium, welded elements
Length: 1150 mm
Weight (excluding mount): 2 kg
Windloading @ 45 m/s: 60 N
Mounting Bracket: 0900964/00
Please order Mounting Bracket separately.
7395xxx
Downfre Antenna
Circular Pol | 6 dBd
Pattern
A circularly polarised UHF antenna designed to radiate downward, in the
direction of the mounting mast. This style antenna is used in paging systems
to provide maximum in-building penetration. Produced to the highest quality
standards these robust antenna designs will insure reliable operation in harsh
environmental conditions.
420...470 MHz
Type 7395xxx
REV0909
www.amphenol-jaybeam.com B-118
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
7417xxx
4 Stack Dipole Array
Cardiod Pattern
V-Pol | 180 | 6.6 dBd
Vertical Pattern
Horizontal Pattern
130...230 MHz
Electrical Specifcations
Frequency Range: 130...230 MHz
Bandwidth: 5% (typical)
Model Numbers*:
Model: Operating Frequency:
7417000 139.5 MHz to 149 MHz
7417170 176 MHz to 194 MHz
7417190 192 MHz to 208 MHz
Gain: 6.6 dBd
VSWR: <1.5:1
Maximum Power: 300 W
Polarisation: Vertical
Horizontal Beamwidth: 180
Vertical Beamwidth: 17
Electrical Downtilt: 0
Front to Back Ratio: > 16 dB
Impedance: 50 ohms
Termination: 3m of RG213 cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Construction:
Centre fed folded dipoles, (with baluns)
fxed on a one piece vertical boom.
Main Boom is 65 mm dia.
Length: 6000 mm @ 200 MHz
Weight (excluding mount): 25 kg @ 200 MHz
Windloading @ 45 m/s: 650 N @ 200 MHz
Mounting Bracket: 0300235/00
Please order Mounting Bracket separately.
An array of four Center Fed Dipole antennas with phasing harness mounted
on an Aluminium mast for extended range PMR/Trunked Radio and Broadcast
applications. This antenna features a Cardiod shaped radiation pattern with
high F/B ration meeting UK R.A. type AJ specifcations. Produced to the highest
quality standards these robust antenna designs will insure reliable operation in
harsh environmental conditions.
Type 7417xxx
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-119 www.amphenol-jaybeam.com
REV0909
7418xxx
2 Stack Dipole Array
Cardoid Pattern
V-Pol | 180 | 3.6 dBd
Vertical Pattern
Horizontal Pattern
130...230 MHz
Electrical Specifcations
Frequency Range: 130...230 MHz
Bandwidth: 5% (typical)
Model Numbers*:
Model: Operating Frequency:
7418000 139.5 MHz to 149 MHz
7418170 176 MHz to 192 MHz
7418190 192 MHz to 208 MHz
Gain: 3.6 dBd
VSWR: <1.5:1
Maximum Power: 300 W
Polarisation: Vertical
Horizontal Beamwidth: 180
Vertical Beamwidth: 33
Electrical Downtilt: 0
Front to Back Ratio: > 15 dB
Impedance: 50 ohms
Termination: 3m of RG213 + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Construction:
Centre fed folded dipoles, (with baluns)
fxed on a one piece vertical boom.
Main Boom is 65 mm dia.
Length: 3500 mm @ 200 MHz
Weight (excluding mount): 15 kg @ 200 MHz
Windloading @ 45 m/s: 370 N @ 200 MHz
Mounting Bracket: 0300235/00
Please order Mounting Bracket separately.
An array of two Center Fed Dipole antennas with phasing harness mounted
on an Aluminium mast for extended range PMR/Trunked Radio and Broadcast
applications. This antenna features a Cardiod shaped radiation pattern with
high F/B ration meeting UK R.A. type 1/2 AJ specifcations. Produced to the
highest quality standards these robust antenna designs will insure reliable
operation in harsh environmental conditions. operation in harsh environmental
conditions.
Type 7418xxx
B-120 www.amphenol-jaybeam.com
REV0909
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency Range: 68...230 MHz
Bandwidth: 5% (typical)
Model Numbers*:
Model: Operating Frequency:
7421097 93 MHz to 103 MHz
7421100 95 MHz to 106 MHz
7421120 110 MHz to 130 MHz
7421139 135 MHz to 144 MHz
Gain: 5.7 dBd
VSWR: <1.5:1
Maximum Power:
300 W (750 W option)
Please call for ordering details on options.
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: 120
Vertical Beamwidth: 70
Front to Back Ratio: > 15 dB
Impedance: 50 ohms
Termination: 3m of RG213 Cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Boom, 49 mm dia. Aluminium
Elements, 19 mm dia. Aluminium
Balun, Epoxy potted, Polyester enclosure
Dimensions (LxWxD): 2200 x 1370 x 120 mm @ 100 MHz
Weight (excluding mount): 9 kg @ 100 MHz
Windloading @ 45 m/s: 300 N @ 100 MHz
Mounting Bracket:
0300064/00 + U-Bolts to match
mounting pipe diameter.
Please order Mounting Bracket separately.
7421xxx
Yagi Antenna
3-Element - Heavy Duty
V-Pol or H-Pol | 120 | 5.7 dBd
Vertical Pattern
Horizontal Pattern
A 3-element Heavy Duty VHF Yagi antenna for high power PMR/Trunked Radio,
Broadcast and extended range VHF Aircraft Band applications. Produced to
the highest quality standards these robust antenna designs will insure reliable
operation in harsh environmental conditions.
68...230 MHz
Type 7421xxx
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-121 www.amphenol-jaybeam.com
REV0909
7427xxx
4 Stack Dipole Array
V-Pol | 205 | 8 dBd
Vertical Pattern
Horizontal Pattern
150...230 MHz
Electrical Specifcations
Frequency Range: 150...230 MHz
Bandwidth: 5% (typical)
Model Numbers*:
Model: Operating Frequency:
7427000 172 MHz to 200 MHz
Gain: 8 dBd
VSWR: <1.5:1
Maximum Power: 300 W
Polarisation: Vertical
Horizontal Beamwidth: 205
Vertical Beamwidth: 17
Electrical Downtilt: 0
Front to Back Ratio: > 7 dB
Impedance: 50 ohms
Termination: 3m of RG213 cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Construction:
Centre fed folded dipoles, (with baluns)
fxed on a one piece vertical boom.
Main Boom is 65 mm dia.
Length: 6000 mm @ 200 MHz
Weight (excluding mount): 25 kg @ 200 MHz
Windloading @ 45 m/s: 570 N @ 200 MHz
Mounting Bracket: 0300235/00
Please order Mounting Bracket separately.
An array of four Center Fed Dipole antennas with phasing harness mounted
on an aluminium mast for extended range PMR/Trunked Radio and Broadcast
applications. This antenna features a Cardiod shaped radiation pattern with
high F/B ration meeting UK R.A. type AK specifcations. Produced to the
highest quality standards these robust antenna designs will insure reliable
operation in harsh environmental conditions.
Type 7427xxx
REV0909
www.amphenol-jaybeam.com B-122
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
7428xxx
2 Stack Dipole Array
V-Pol | 205 | 5 dBd
Vertical Pattern
Horizontal Pattern
130...360 MHz
Electrical Specifcations
Frequency Range: 130...230 MHz
Bandwidth: 5% (typical)
Model Numbers*:
Model: Operating Frequency:
7428000 139.5 MHz to 149 MHz
7428170 176 MHz to 192 MHz
7428200 192 MHz to 208 MHz
Gain: 5 dBd
VSWR: <1.5:1
Maximum Power: 300 W
Polarisation: Vertical
Horizontal Beamwidth: 205
Vertical Beamwidth: 33
Electrical Downtilt: 0
Front to Back Ratio: > 7 dB
Impedance: 50 ohms
Termination: 3m of RG213 + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Construction:
Centre fed folded dipoles, (with baluns)
fxed on a one piece vertical boom.
Main Boom is 65 mm dia.
Length: 4000 mm @ 200 MHz
Weight (excluding mount): 9.5 kg @ 200 MHz
Windloading @ 45 m/s: 360 N @ 200 MHz
Mounting Bracket: 0300235/00
Please order Mounting Bracket separately.
An array of two Center Fed Dipole antennas with phasing harness mounted
on an Aluminium mast for extended range PMR/Trunked Radio and Broadcast
applications. This carefully designed antenna meets UK R.A. type 1/2 AJ
specifcations. Produced to the highest quality standards these robust antenna
designs will insure reliable operation in harsh environmental conditions.
Type 7428xxx
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-123 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency: 100 MHz to 500 MHz
Gain: 0 dBd
VSWR:
<2.5:1 over full band
<2:1 typical over VHF and UHF air band
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 80
Impedance: 50 ohms
Termination: N Female on RG213 Coaxial Down lead
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Elements, Solid Aluminium rod
Spine, Aluminium tube, bracings Aluminium
and PVC.
Finish, Alochrome
Dimensions: 1170 mm Height x 1360 mm Dia.
Weight (excluding mount): 5.0 kg
Windloading @ 45 m/s: 186 N
Recommended
Mounting Bracket:
0900964/00
Alternate
Mounting Bracket:
0300064/00 + U-Bolts to
match mounting pipe diameter.
Please order Mounting Bracket separately.
A Wideband Discone antenna commonly used for ground-to-air and frequency
scanning applications. The discone element design provides reliable
communications over an extremely wide operating bandwidth. The 7437 model
is a reinforced version of the popular 7177 model for high wind applications.
7437010
Wideband Discone Antenna
V-Pol | 360 | 0 dBd
Vertical Pattern
Horizontal Pattern
100-500 MHz
Type 7437010
REV0909
www.amphenol-jaybeam.com B-124
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
7500xxx
End Fed Dipole Antenna
V-Pol | 360 | 0 dBd
118...233 MHz
Electrical Specifcations
Frequency Range: 118...233 MHz
Model Numbers*:
Model: Operating Frequency:
7500118 118 MHz to 136 MHz
7500001 145 MHz to 165 MHz
7500151 155 MHz to 175 MHz
7500185 175 MHz to 195 MHz
7500200 190 MHz to 210 MHz
7500212 200 MHz to 225 MHz
7500228 216 MHz to 233 MHz
Gain: 0 dBd
VSWR: <1.5:1
Maximum Power: 150 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 80
Impedance: 50 ohms
Termination:
0.5m RG213 Cable + N Female
(7/16-DIN optional)
Lightning Protection: DC Grounded
*Other frequencies available upon request.
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 1460 mm @ 120 MHz
Weight (including mount): 1.0 kg @ 120 MHz
Windloading @ 45 m/s (N): 35 N @ 120 MHz
Mounting Bracket:
Integral Mounting Clamp
to ft 38-50 mm dia. pipe or horizontal rail.
A rugged and durable VHF End Fed Dipole antenna housed inside a high-
strength, glassfbre shroud. An integrated mounting clamp allows easy installation
on poles or horizontal rails. Produced to the highest quality standards these
robust antenna designs will insure reliable operation in harsh environmental
conditions.
Type 7500xxx
Vertical Pattern
Horizontal Pattern
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-125 www.amphenol-jaybeam.com
REV0909
7501xxx
End Fed Dipole Antenna
V-Pol | 360 | 0 dBd
Vertical Pattern
Horizontal Pattern
305...500 MHz
Electrical Specifcations
Frequency Range: 305...500 MHz
Model Numbers*:
Model: Operating Frequency:
7501315 305 MHz to 325 MHz
7501340 325 MHz to 355 MHz
7501348 330 MHz to 365 MHz
7501380 380 MHz to 430 MHz
7501450 420 MHz to 470 MHz
7501470 450 MHz to 500 MHz
Gain: 0 dBd
VSWR: <1.5:1
Maximum Power: 150 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 80
Impedance: 50 ohms
Termination:
0.5m RG213 Cable + N Female
(7/16-DIN optional)
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 605 mm
Weight (including mount): 0.9 kg
Windloading @ 45 m/s: 16 N
Mounting Bracket:
Integral Mounting Clamp
to ft 38-50 mm dia. pipe or horizontal rail.
A UHF End Fed Dipole antenna designed for PMR / TETRA networks. The
antenna is housed inside a high-strength, glassfbre shroud and contains an
integrated mounting clamp for easy installation to poles or horizontal rails.
Produced to the highest quality standards these robust antenna designs will
provide years of reliable operation.
Type 7501xxx
REV0909
www.amphenol-jaybeam.com B-126
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
7502xxx
End Fed Dipole Antenna
Heavy Duty
V-Pol | 360 | 0 dBd
225-512 MHz
Electrical Specifcations
Frequency Range: 225 MHz to 512 MHz
Model Numbers*:
Model: Operating Frequency:
7502000 225 MHz to 400 MHz
7502450 340 MHz to 512 MHz
Gain: 0 dBd
VSWR: <2.3:1 (<2:1 typical)
Maximum Power: 500 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 85
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 1216 mm
Weight (excluding mount): 2 kg
Windloading @ 45 m/s: 150 N
Recommended
Mounting Bracket:
0300120/00
Alternate
Mounting Bracket:
0300066/00
Please order Mounting Bracket separately.
A Heavy Duty VHF / UHF End Fed Dipole antenna for high power UHF AIR
BAND and Trunked Radio applications. Produced to the highest quality
standards these robust antenna designs will insure reliable operation in harsh
environmental conditions.
Type 7502xxx
Vertical Pattern
Horizontal Pattern
REV0909
www.amphenol-jaybeam.com B-127
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
7511xxx
End Fed Dipole Antenna
V-Pol | 360 | 0 dBd
500...1175 MHz
Electrical Specifcations
Frequency Range: 500...1175 MHz
Model Numbers*:
Model: Operating Frequency:
7511600 575 MHz to 625 MHz
7511625 600 MHz to 650 MHz
7511705 680 MHz to 730 MHz
7511835 810 MHz to 875 MHz
7511890 870 MHz to 910 MHz
7511925 900 MHz to 950 MHz
7511950 930 MHz to 970 MHz
Gain: 0 dBd
VSWR: <1.5:1
Maximum Power: 50 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 80
Impedance: 50 ohms
Termination: 0.3 m RG213 Cable + N Female
Lightning Protection: DC Grounded
*Other frequencies available upon request.
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 250 mm
Weight (including mount): 0.85 kg
Windloading @ 45 m/s: 11 N
Mounting Bracket:
Integral Mounting Clamp
to ft 38-50 mm dia. pipe or horizontal rail.
A UHF End Fed Dipole Antenna housed inside a high-strength, glassfbre shroud.
An integrated mounting clamp allows easy installation on poles or horizontal
rails. Produced to the highest quality standards these robust antenna designs
will insure years of reliable operation.
Type 7511xxx
Vertical Pattern
Horizontal Pattern
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-128 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency Range: 135...250 MHz
Model Numbers*:
Model: Operating Frequency:
7513000 145 MHz to 165 MHz
7513150 154 MHz to 166 MHz
7513160 163 MHz to 175 MHz
7513184 176 MHz to 192 MHz
7513190 192 MHz to 208 MHz
Gain: 3 dBd
VSWR: <1.5:1
Maximum Power: 150 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 35
Electrical Downtilt: 0
Impedance: 50 ohms
Termination: 0.3m RG213 cable + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 2700 mm
Weight (including mount): 1.8 kg
Windloading @ 45 m/s: 73 N
Mounting Bracket:
Integral Mounting Clamp
to ft 38-50 mm dia. pipe or horizontal rail.
7513xxx
Colinear Antenna
V-Pol | 360 | 3 dBd
Vertical Pattern
Horizontal Pattern
A rugged and durable VHF Colinear antenna housed inside a high-strength,
glassfbre shroud. An integrated mounting clamp allows easy installation on
poles or horizontal rails. Produced to the highest quality standards these
robust antenna designs will insure reliable operation in harsh environmental
conditions.
135...250 MHz
Type 7513xxx
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-129 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency Range: 118...270 MHz
Bandwidth: 6 MHz
Model Numbers*:
Model: Operating Frequency:
7530100 118 MHz to 124 MHz
7530110 124 MHz to 130 MHz
7530120 128 MHz to 134 MHz
7530010 150 MHz to 157 MHz
7530011 159 MHz to 165 MHz
7530030 160 MHz to 168 MHz
7530040 166 MHz to 174 MHz
7530200 169 MHz to 170 MHz
Gain: 3.0 dBd
VSWR: <1.5:1
Maximum Power: 500 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 35
Electrical Downtilt: 0
Impedance: 50 ohms
Termination: N Female (7/16-DIN optional)
Lightning Protection:
DC Grounded. Antennas remain intact
following a lightning strike of 2.5 x 10
5
Amp
2
second. Finial 1/2 stainless steel extending
220 mm beyond top cap.
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 3800 mm @ 150 MHz
Weight (excluding mount): 6.5 kg @ 150 MHz
Windloading @ 45 m/s: 270 N @ 150 MHz
Mounting Bracket: 0300120/00
Please order Mounting Bracket separately.
7530xxx
Colinear Antenna
V-Pol | 360 | 3 dBd
Vertical Pattern
Horizontal Pattern
A heavy duty, lightning proof Colinear antenna offered in a variety of frequencies
covering the VHF band. The high power rating on this design makes it suitable
for Trunked Radio and Paging applications. These antennas are housed inside
a high-strength, glassfbre shroud and manufactured to the highest quality
standards insuring long term, reliable operation.
118...270 MHz
Type 7530xxx
REV0909
www.amphenol-jaybeam.com B-130
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency: 380...510 MHz
Model Numbers*:
Model: Operating Frequency:
7533395 380 MHz to 410 MHz
7533400 400 MHz to 440 MHz
7533000 430 MHz to 470 MHz
Gain: 3 dBd
VSWR: <1.5:1
Maximum Power: 150 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 35
Electrical Downtilt: 0
Impedance: 50 ohms
Termination: 0.3m RG213 + N Female (7/16-DIN Optional)
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 1500 mm
Weight (including mount): 1.5 kg
Windloading @ 45 m/s: 35 N
Mounting Bracket:
Integral Mounting Clamp
to ft 38-50 mm dia. pipe or horizontal rail.
7533xxx
Colinear Antenna
V-Pol | 360 | 3 dBd
Vertical Pattern
Horizontal Pattern
A rugged and durable UHF Colinear antenna carrying UK R.A. type approval for
UHF Telemetry systems. This design is housed inside a high-strength, glassfbre
shroud and includes an integrated mounting clamp allowing easy installation
on poles or horizontal rails. Produced to the highest quality standards these
robust antenna designs will insure reliable operation in harsh environmental
conditions.
380...510 MHz
Type 7533xxx
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-131 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency Range: 380...470 MHz
Model Numbers*:
Model: Operating Frequency:
7536395 380 MHz to 410 MHz
7536415 400 MHz to 430 MHz
7536420 420 MHz to 450 MHz
7536000 440 MHz to 470 MHz
Gain: 5.5 dBd
VSWR: <1.5:1
Maximum Power: 150 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 17
Electrical Downtilt: 0
Impedance: 50 ohms
Termination:
0.3m RG213 cable + N Female
(7/16-DIN Optional)
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 2700 mm
Weight (including mount): 1.8 kg
Windloading @ 45 m/s: 73 N
Mounting Bracket:
Integral Mounting Clamp
to ft 38-50 mm dia. pipe or horizontal rail.
7536xxx
Colinear Antenna
V-Pol | 360 | 5.5 dBd
Vertical Pattern
Horizontal Pattern
A rugged and durable UHF Colinear antenna designed for use in TETRA
networks. This design is housed inside a high-strength, glassfbre shroud and
includes an integrated mounting clamp allowing easy installation on poles or
horizontal rails. Produced to the highest quality standards these robust antenna
designs will insure reliable operation in harsh environmental conditions. Low
IMP rated models are available upon request.
Type 7536xxx
380...470 MHz
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-132 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency: 380 MHz to 400 MHz
Gain:
Top: 4.3 dBd
Bottom: 5.2 dBd
VSWR: 1.4:1 Max
Maximum Power: 300 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 20.5
Electrical Downtilt:
Model: Electrical Downtilts:
7548380 0
7548386 6
7548392 12
Port to Port Isolation: > 37 dB
Lightning Protection:
Will withstand pulse of 2.5 x 10
6
A
2
s. All metal
parts DC grounded
Impedance: 50 ohms
Termination: 2 x 7/16-DIN Female on cable downleads
Lightning Protection:
DC Grounded. Antennas remain intact
following a lightning strike of 2.5 x 10
5
Amp
2
second. Finial 1/2 stainless steel extending
220 mm beyond top cap.
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 5780 mm
Weight (excluding mount): 12.5 kg
Windloading @ 45 m/s: 430 N
Mounting Bracket: 0300120/00
Please order Mounting Bracket separately.
7548xxx
Colinear Antenna
2 - i n - 1
V-Pol | 360 | 5.2 dBd
Vertical Pattern
Horizontal Pattern
A 2-in-1 heavy duty, lightning proof Colinear antenna designed for use in
TETRA networks. Two separate omnidirectional antennas are contained inside
a single high strength, glassfbre shroud. High port to port isolation between the
antennas allows for diversity. Produced to the highest quality standards these
robust antenna designs will insure reliable operation in harsh environmental
conditions.
380-400 MHz
Type 7548xxx
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-133 www.amphenol-jaybeam.com
REV0909
75492xx
Colinear Antenna
V-Pol | 360 | 8.9 dBd
Vertical Pattern
Horizontal Pattern
380-400 MHz
Electrical Specifcations
Frequency: 380 MHz to 400 MHz
Model Numbers*:
Model: Electrical DT: Termination:
7549200
7549206
0
6
7/16-DIN Female
Gain: 8.9 dBd
VSWR: <1.5:1
Maximum Power: 300 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 7.5
Intermodulation: <-153 dBc for 2 x 20 W Carriers
Impedance: 50 ohms
Lightning Protection:
DC Grounded. Antennas remain intact
following a lightning strike of 2.5 x 10
5
Amp
2
second. Finial 1/2 stainless steel extending
220 mm beyond top cap.
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 5125 mm
Weight (excluding mount): 12 kg
Windloading @ 45 m/s: 380 N
Mounting Bracket: 0300235/00
Please order Mounting Bracket separately.
A heavy duty, lightning proof Colinear antenna designed for use in TETRA
networks. Antennas in this range are carefully designed to provide low passive
intermodulation to minimize network interference. These antennas are housed
inside a high-strength glass fbre shroud and manufactured to the highest quality
standard, insuring long term, reliable operation.
Type 75492xx
REV0909
www.amphenol-jaybeam.com B-134
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency Range: 380 MHz to 400 MHz
Gain: 7.9 dBd
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 9
Electrical Downtilt: 5 - 8 Variable Tilt*
Impedance: 50 ohms
Termination: 7/16-DIN Female
Lightning Protection: DC Grounded
* Electrical Tilt is adjusted by a knob at the bottom of the antenna.
Mechanical Specifcations
Materials:
Glass fbre shroud with 80 mm dia.
Aluminium mounting section
Length:
5235 mm (excluding fnial)
5460 mm (including fnial)
Weight (excluding mount): 15 kg
Windloading @ 45 m/s: 365 N
Recommended
Mounting Bracket:
0900638/00
Please order Mounting Bracket separately.
7549387
Colinear Antenna
Variable Tilt
V-Pol | 360 | 7.9 dBd
Vertical Pattern
Horizontal Pattern
A heavy duty, variable electrical downtilt Colinear antenna designed for use in
TETRA networks. This antenna has been optimized to provide a signal level
at the horizon which is -5dB +/- 3dB below the main beam maximum. This
adjustment range allows an operator to fne tune the coverage of each cell
and minimize adjacent cell interference. The antenna is housed inside a high
strength, glassfbre shroud and manufactured to the highest quality standards
insuring long term, reliable operation.
380-400 MHz
Type 7549387
PRELIMINARY
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-135 www.amphenol-jaybeam.com
REV0909
7549xxx
Colinear Antenna
V-Pol | 360 | 10.2 dBi
380...470 MHz
Electrical Specifcations
Frequency Range: 380...470 MHz
Model Numbers*:
Model: Operating Frequency:
7549003 400 MHz to 430 MHz
7549001 440 MHz to 470 MHz
Gain: 10.2 dBi
VSWR: <1.5:1
Maximum Power: 300 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 7.5
Electrical Downtilt: 0
Impedance: 50 ohms
Termination: N-Female or 7/16-DIN
Lightning Protection:
DC Grounded. Antennas remain intact
following a lightning strike of 2.5 x 10
5
Amp
2
second. Finial 1/2 stainless steel extending
220 mm beyond top cap.
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 5125 mm
Weight (excluding mount): 12 kg
Windloading @ 45 m/s: 380 N
Mounting Bracket: 0300235/00
Please order Mounting Bracket separately.
A heavy duty, lightning proof Colinear antenna designed for use in TETRA
networks. With 9 dBd omnidirectional gain, excellent pattern performance
and electrical tilt options, these antennas are well suited for modern digital
systems. These antennas are housed inside a high-strength, glassfbre shroud
and manufactured to the highest quality standards insuring long term, reliable
operation.
Type 7549xxx
Vertical Pattern
Horizontal Pattern
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-136 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency Range: 800...960 MHz
Bandwidth: 35 MHz
Model Number*:
Model: Operating Frequency:
7556826 806 MHz to 846 MHz
7556855 840 MHz to 870 MHz
7556880 860 MHz to 900 MHz
7556910 890 MHz to 930 MHz
7556940 920 MHz to 960 MHz
Gain: 5.7 dBd
VSWR: <1.5:1
Maximum Power: 150 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 17
Electrical Downtilt: 0
Impedance: 50 ohms
Termination: 0.5m RG213 + N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 1280 mm
Weight (including mount): 1.1 kg
Windloading @ 45 m/s: 35 N
Mounting Bracket:
Integral Mounting Clamp
to ft 38-50 mm dia. pipe or horizontal rail.
7556xxx
Colinear Antenna
V-Pol | 360 | 5.7 dBd
Vertical Pattern
Horizontal Pattern
A rugged and durable UHF Colinear antenna for Telemetry, Paging and Trunked
Radio applications. This design is housed inside a high-strength, glassfbre
shroud and includes an integrated mounting clamp allowing easy installation
on poles or horizontal rails. Produced to the highest quality standards these
robust antenna designs will insure reliable operation in harsh environmental
conditions.
800...960 MHz
Type 7556xxx
REV0909
www.amphenol-jaybeam.com B-137
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency Range: 1360...1530 MHz
Model Number:
Model: Operating Frequency:
7576100 1360 MHz to 1460 MHz
7576000 1427 MHz to 1530 MHz
7576600 1550 MHz to 1650 MHz
Gain: 8.1 dBi
VSWR: <1.5:1
Maximum Power: 100 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 14
Electrical Downtilt*: 0
Impedance: 50 ohms
Termination: N Socket at the base
Lightning Protection:
DC Grounded. Antennas remain intact
following a lightning strike of 2.5 x 10
5
Amp
2
second. Finial 1/2 stainless steel extending
220 mm beyond top cap.
* Other Electrical Downtilts available upon request.
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 1320 mm
Weight (excluding mount): 2.5 kg
Windloading @ 45 m/s: 70 N
Recommended
Mounting Bracket:
0300120/00
Alternate
Mounting Bracket:
0300066/00
Please order Mounting Bracket separately.
7576xxx
Colinear Antenna
V-Pol | 360 | 8.1 dBd
Vertical Pattern
Horizontal Pattern
A rugged and durable SHF band Colinear antenna housed inside a high-
strength, glassfbre shroud. Produced to the highest quality standards these
robust antenna designs will insure reliable operation in harsh environmental
conditions.
1360...1530 MHz
Type 7576xxx
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-138 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency Range: 1420 MHz to 1530 MHz
Gain: 10 dBi
VSWR: <1.5:1
Maximum Power: 100 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 8
Electrical Downtilt*: 0
Impedance: 50 ohms
Termination: N Socket at the base
Lightning Protection:
DC Grounded. Antennas remain intact
following a lightning strike of 2.5 x 10
5
Amp
2
second. Finial 1/2 stainless steel extending
220 mm beyond top cap.
* Other Electrical Downtilts available upon request.
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 2020 mm
Weight (excluding mount): 3.5 kg
Windloading @ 45 m/s: 134 N
Mounting Bracket: 0300120/00
Please order Mounting Bracket separately.
7579000
Colinear Antenna
V-Pol | 360 | 10 dBi
Vertical Pattern
Horizontal Pattern
A heavy duty, lightning proof SHF band Colinear antenna. These antennas
are housed inside a high-strength, glassfbre shroud and manufactured to the
highest quality standards insuring long term, reliable operation.
1420-1530 MHz
Type 7579000
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-139 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency Range: 380 MHz to 400 MHz
Gain: 4.6 dBd
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 20
Electrical Downtilt: 10 - 15 Variable Tilt*
Impedance: 50 ohms
Termination: 7/16-DIN Female
Lightning Protection: DC Grounded
* Electrical Tilt is adjusted by a knob at the bottom of the antenna.
Mechanical Specifcations
Materials:
Glass fbre shroud with 80 mm dia.
Aluminium mounting section
Length:
2960 mm (excluding fnial)
3120 mm (including fnial)
Weight (excluding mount): 10 kg
Windloading @ 45 m/s: 210 N
Recommended
Mounting Bracket:
0900638/00
Please order Mounting Bracket separately.
7586307
Colinear Antenna
Variable Tilt
V-Pol | 360 | 4.6 dBd
Vertical Pattern
Horizontal Pattern
A heavy duty, variable electrical downtilt Colinear antenna designed for use in
TETRA networks. This antenna has been optimized to provide a signal level
at the horizon which is -5dB +/- 3dB below the main beam maximum. This
adjustment range allows an operator to fne tune the coverage of each cell
and minimize adjacent cell interference. The antenna is housed inside a high
strength, glassfbre shroud and manufactured to the highest quality standards
insuring long term, reliable operation.
380-400 MHz
Type 7586307
PRELIMINARY
REV0909
www.amphenol-jaybeam.com B-140
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
75863xx
Colinear Antenna
V-Pol | 360 | 6 dBd
Vertical Pattern
Horizontal Pattern
Electrical Specifcations
Frequency Range: 380 MHz to 400 MHz
Model Numbers*:
Model: Electrical DT: Termination:
7586380
7586386
7586388
7586392
0
6
8
12
7/16 DIN Female
7586390
7586396
7586398
7586382
0
6
8
12
N Female
Gain: 6 dBd
VSWR: <1.5:1
Maximum Power: 300 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 17
Impedance: 50 ohms
Lightning Protection:
DC Grounded. Antennas remain intact
following a lightning strike of 2.5 x 10
5
Amp
2
second. Finial 1/2 stainless steel extending
220 mm beyond top cap.
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 3100 mm
Weight (excluding mount): 7 kg
Windloading @ 45 m/s: 220 N
Mounting Bracket: 0300120/00
Please order Mounting Bracket separately.
A heavy duty, lightning proof Colinear antenna designed for use in TETRA
networks. Antennas in this range are carefully designed to provide low passive
intermodulation to minimize network interference. These antennas are housed
inside a high-strength glass fbre shroud and manufactured to the highest quality
standard, insuring long term, reliable operation.
Type 75863xx
380-400 MHz
REV0909
www.amphenol-jaybeam.com B-141
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency Range: 400...470 MHz
Model Numbers*:
Model: Operating Frequency:
7586400 410 MHz to 430 MHz
7586080** 420 MHz to 440 MHz
7586460** 450 MHz to 470 MHz
Gain: 6 dBd
VSWR: <1.5:1
Maximum Power: 300 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 17
Electrical Downtilt:
0
Also available in 5 or 10
Impedance: 50 ohms
Termination: N Female
Lightning Protection:
DC Grounded. Antennas remain intact
following a lightning strike of 2.5 x 10
5
Amp
2
second.
* Other frequencies available upon request.
** Finial 1/2 stainless steel extending 220 mm beyond top cap.
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 3100 mm
Weight (excluding mount): 7 kg
Windloading @ 45 m/s: 220 N
Mounting Bracket: 0300120/00
Please order Mounting Bracket separately.
7586xxx
Colinear Antenna
V-Pol | 360 | 6 dBd
A heavy duty, lightning proof Colinear antenna designed for use in TETRA
networks. With 6 dBd omnidirectional gain, excellent pattern performance
and electrical tilt options, these antennas are well suited for modern digital
systems. These antennas are housed inside a high-strength, glassfbre shroud
and manufactured to the highest quality standards insuring long term, reliable
operation.
Type 7586xxx
Vertical Pattern
Horizontal Pattern
400...470 MHz
REV0909
www.amphenol-jaybeam.com B-142
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency: 2300 MHz to 2700 MHz
Gain: 17.0 dBi
VSWR: <1.3:1 typical
Maximum Power: 100 W
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: 22
Vertical Beamwidth: 20
Front to Back Ratio: >30 dB
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Shroud, Styrosun
Housing, Aluminium
Dimensions (LxWxD): 345 x 310 x 50 mm
Weight (including mount): 4 kg
Windloading @ 45 m/s: 160 N
Mounting Bracket:
Integral Mounting Bracket to ft 48 -115 mm
dia. pipe and provides 8 mechanical tilt.
7636000
Directional Panel Antenna
V-Pol or H-Pol | 22 | 17 dBi
Vertical Pattern
Horizontal Pattern
A high gain, Panel antenna designed for links in the 2.3 to 2.7 GHz band. A
planar array of dipole elements concealed inside a low loss radome to provide
highly directional performance in a low profle design. Produced to the highest
quality standards these robust antenna designs will insure reliable operation in
harsh environmental conditions.
2300-2700 MHz
Type 7636000
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-143 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency Range: 1350 MHz to 1517 MHz
Gain: 17.0 dBi
VSWR: <1.3:1
Maximum Power: 100 W
Polarisation: Vertical or Horizontal
Horizontal Beamwidth: 23
Vertical Beamwidth: 23
Front to Back Ratio: >30 dB
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
* Other frequencies available upon request.
Mechanical Specifcations
Materials:
Shroud, Styrosun
Housing, Aluminium
Dimensions (LxWxD): 505 x 465 x 152 mm
Weight (including mount): 4 kg
Windloading @ 45 m/s: 300 N
Mounting Bracket:
Integral Mounting Brackets to ft pipes up to
48mm diameter, allowing mechanical tilt over
8 to remove tower rake. Other brackets
available on request to ft pipes of up to
115mm diameter.
7680000
Directional Panel Antenna
V-Pol or H-Pol | 23 | 17 dBi
Vertical Pattern
Horizontal Pattern
A high gain, SHF Panel antenna designed for links in the 1.4GHz band. A
planar array of dipole elements concealed inside a low loss radome to provide
highly directional performance in a low profle design. Produced to the highest
quality standards these robust antenna designs will insure reliable operation in
harsh environmental conditions.
1350-1517 MHz
Type 7680000
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-144 www.amphenol-jaybeam.com
REV0909
468-860 MHz
Electrical Specifcations
Frequency: 468 MHz to 860 MHz
Model Numbers*:
Model: Termination:
LPU/R-N N Female
LPU/R-7/16 7/16-DIN Female
Gain: 7.9 dBd
VSWR: < 1.3:1
Maximum Power: 250 W
Horizontal Beamwidth: 70
Polarisation: Vertical or Horizontal
Impedance: 50 ohms
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials: Aluminium Alloy
Dimensions (LxW): 1210 x 320 mm
Weight (including mount): 3.5 kg
Mounting Bracket:
Mounting Bracket included to ft 38-50 mm
dia. pipe.
LPU/R*
Log Periodic Antenna
V-Pol or H-Pol | 70 | 7.9 dBd
A Log Periodic antenna designed for UHF Broadcast, TETRA and Cellular
communications applications. This antenna is often used in a stacked array to
form a rugged, high power, extended range antenna. Produced to the highest
quality standards these robust antenna designs will insure reliable operation in
harsh environmental conditions.
Type LPU/R*
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-145 www.amphenol-jaybeam.com
REV0909
MA100K01
Indoor / Microcell
Low Profle Omni
Linear Pol | 360 | 0 dBd
Vertical Pattern
Horizontal Pattern
140...156 MHz
Electrical Specifcations
Frequency Range*: 140...156 MHz
Gain: 0 dBd
VSWR: <1.5:1 @ tuning frequency
Maximum Power: 50 W
Polarisation: Linear, Perpendicular to Base
Horizontal Beamwidth: 360
Vertical Beamwidth: 80
Shroud Polypropylene
Termination: 5m of RG58 Cable, No connector at end
*Adjust tuning screw under base to achieve required center frequency.
Mechanical Specifcations
Materials:
Aluminium base and black polypropylene
radome
Dimensions (LxWxD): 635 x 190 x 60 mm
Weight: 1.1 kg
Windloading @ 45 m/s: 200 N
Mounting Bracket:
16 x 3.3 mm dia. holes in base plate provided
for mounting.
An omnidirectional, low profle, fully shrouded VHF antenna for indoor or vehicle
roof applications. Although designed to be installed on a metal surface, good
performance can also be achieved on non-metallic surfaces. The antenna is
user-tuned by adjusting a screw under the base to achieve best performance at
the operating frequency. This antenna is supplied with 5m coaxial cable with no
connector on the end. Please order the desired connector style separately.
Type MA100K01
REV0909
www.amphenol-jaybeam.com B-146
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency Range*: 154...174 MHz
Gain: 0 dBd
VSWR: <1.5:1 @ tuning frequency
Maximum Power: 50 W
Polarisation: Linear, Perpendicular to base
Horizontal Beamwidth: 80
Vertical Beamwidth: 360
Shroud Polypropylene
Termination: 5m of RG58 Cable, No connector at end
*Adjust tuning screw under base to achieve required center frequency.
Mechanical Specifcations
Materials:
Aluminium base and black polypropylene
radome
Dimensions (LxWxD): 635 x 190 x 60 mm
Weight: 1.1 kg
Windloading @ 45 m/s: 200 N
Mounting Bracket:
16 x 3.3 mm dia. holes in base plate provided
for mounting.
MA100LM01
Indoor / Microcell
Low Profle Omni
Linear Pol | 360 | 0 dBd
Vertical Pattern
Horizontal Pattern
An omnidirectional, low profle, fully shrouded VHF antenna for indoor or vehicle
roof applications. Although designed to be installed on a metal surface, good
performance can also be achieved on non-metallic surfaces. The antenna is
user-tuned by adjusting a screw under the base to achieve best performance at
the operating frequency. This antenna is supplied with 5m coaxial cable with no
connector on the end. Please order the desired connector style separately.
154...174 MHz
Type MA100LM01
REV0909
www.amphenol-jaybeam.com B-147
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
MA100PQ01
Indoor / Microcell
Low Profle Omni
Linear Pol | 360 | 0 dBd
Electrical Specifcations
Frequency Range*: 380...430 MHz
Gain: 0 dBd
VSWR: <1.5:1
Maximum Power: 20 W
Polarisation: Linear, Perpendicular to Base
Horizontal Beamwidth: 360
Vertical Beamwidth: 80
Impedance: 50 ohms
Termination: 5m RG58 Cable, No connector at end
*Adjust tuning screw under base to achieve required center frequency.
Mechanical Specifcations
Materials:
Aluminium base and black polypropylene
radome
Dimensions: 35 mm Height x 178 mm Dia.
Weight: 0.45 kg
Mounting Bracket:
8 x 3.3 mm dia holes in base plate provided
for mounting.
An omnidirectional, low profle, fully shrouded UHF antenna for indoor or vehicle
roof applications. Although designed to be installed on a metal surface, good
performance can also be achieved on non-metallic surfaces. The antenna is
user-tuned by adjusting a screw under the base to achieve best performance at
the operating frequency. This antenna is supplied with 5m coaxial cable with no
connector on the end. Please order the desired connector style separately.
Type MA100PQ01
380...430 MHz
Vertical Pattern
Mounted on Metal Surface
Horizontal Pattern
Vertical Pattern
Mounted on Non-Metallic
Surface
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-148 www.amphenol-jaybeam.com
REV0909
MA100RS00
Indoor / Microcell
Low Profle Omni
Linear Pol | 360 | 0 dBd
430...480 MHz
Horizontal Pattern
Vertical Pattern
Mounted on Metal Surface
Vertical Pattern
Mounted on Non-Metallic
Surface
Electrical Specifcations
Frequency Range*: 430...480 MHz
Gain: 0 dBd
VSWR: <1.5:1
Maximum Power: 20 W
Polarisation: Linear, Perpendicular to Base
Horizontal Beamwidth: 360
Vertical Beamwidth: 80
Impedance: 50 ohms
Termination: 5m RG58 Cable, No connector at end
*Adjust tuning screw under base to achieve required center frequency.
Mechanical Specifcations
Materials:
Aluminium base and black polypropylene
radome
Dimensions: 35 mm Height x 178 mm Dia.
Weight: 0.45 kg
Mounting Bracket:
8 x 3.3 mm dia holes in base plate provided
for mounting.
An omnidirectional, low profle, fully shrouded UHF antenna for indoor or vehicle
roof applications. Although designed to be installed on a metal surface, good
performance can also be achieved on non-metallic surfaces. The antenna is
user-tuned by adjusting a screw under the base to achieve best performance at
the operating frequency. This antenna is supplied with 5m coaxial cable with no
connector on the end. Please order the desired connector style separately.
Type MA100RS00
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-149 www.amphenol-jaybeam.com
REV0909
MA411xxx
Ground Plane Antenna
V-Pol | 360 | 0 dBd
Vertical Pattern
Horizontal Pattern
31...88 MHz
Electrical Specifcations
Frequency Range*: 31...88 MHz
Bandwidth: 2% (typical)
Model Numbers:
Model: Operating Frequency:
MA411D00 31... 41 MHz
MA411H02 82... 88 MHz
Gain: 0 dBd
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 86
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
*Tuning chart provided. Trim whips to achieve required center frequency.
Mechanical Specifcations
Materials:
Aluminium Alloy, Glass Fibre,
and Stainless Steel
Whip Dimension: 990 mm @ 82 MHz
Weight (including mount): 6.5 kg @ 31 MHz, 4 kg @ 82 MHz
Windloading @ 45 m/s: 240 N @ 31 MHz, 120 N @ 82 MHz
Mounting Bracket:
Integral mounting bracket
to ft on 30-60 mm dia. mast
A VHF Ground Plane antenna with integrated mount designed to attach to the
top of a 30 60 mm diameter mast. The active element is a folded monopole.
The ground plane elements are user-tuned to achieve best performance at the
operating frequency. Tuning chart provided.
Type MA411xxx
REV0909
www.amphenol-jaybeam.com B-150
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
MA412D00
Ground Plane Antenna
V-Pol | 360 | 0 dBd
Vertical Pattern
Horizontal Pattern
31...41 MHz
Electrical Specifcations
Frequency Range*: 31...41 MHz
Bandwidth: 2% (typical)
Gain: 0 dBd
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 86
Impedance: 50 ohms
Termination: UHF (SO239) Female
Lightning Protection: DC Grounded
*Tuning chart provided. Trim whips to achieve required center frequency.
Mechanical Specifcations
Materials:
Aluminium Alloy, Glass Fibre,
and Stainless Steel
Whip Dimension: 2300 mm @ 31 MHz
Weight (including mount): 6.5 kg @31 MHz
Windloading @ 45 m/s: 240 N @31 MHz
Mounting Bracket:
Integral mounting bracket
to ft on 30-60 mm dia. mast
A VHF Ground Plane antenna with integrated mount designed to attach to the
top of a 30 60 mm diameter mast. The active element is a folded monopole.
The ground plane elements are user-tuned to achieve best performance at the
operating frequency. Tuning chart provided.
Type MA412D00
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-151 www.amphenol-jaybeam.com
REV0909
MA421H06
Shrouded Yagi Antenna
2-Element
V-Pol | 150 | 2 dBd
Vertical Pattern
Horizontal Pattern
74-82 MHz
Electrical Specifcations
Frequency: 74 MHz to 82 MHz
Gain: 2 dBd
VSWR: <1.5:1 in the frequency band
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 150
Vertical Beamwidth: 70
Front to Back Ratio: >12 dB
Impedance: 50 ohms
Termination: 0.65m Coaxial Cable + N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Boom, 45 mm dia. Aluminium
Elements, 14 mm dia. Aluminium
Balun, Enclosed in Glass fbre shroud
Length: 1060 mm
Weight (excluding mount): 5.6 kg
Windloading @ 45 m/s: 380 N
Mounting Bracket:
MA621AZ51 Clamp
supplied to ft 25-50 mm dia. mast
A 2-element VHF Yagi antenna for PMR/Trunked Radio and Band I Broadcast
applications. The driven element for this design is enclosed in a weather
resistant, glassfbre shroud to provide consistent, reliable performance in all
weather conditions.
Type MA421H06
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-152 www.amphenol-jaybeam.com
REV0909
MA421H08
Shrouded Yagi Antenna
3-Element
V-Pol | 120 | 3 dBd
Vertical Pattern
Horizontal Pattern
74-82 MHz
Electrical Specifcations
Frequency: 74 MHz to 82 MHz
Gain: 3 dBd
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 120
Vertical Beamwidth: 65
Front to Back Ratio: > 15 dB
Impedance: 50 ohms
Termination: 0.65m Coaxial Cable + N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Boom, 45 mm dia. Aluminium
Elements, 14 mm dia. Aluminium
Balun, Enclosed in Glass fbre shroud
Length: 1770 mm
Weight (excluding mount): 6.4 kg
Windloading @ 45 m/s: 460 N
Mounting Bracket:
MA621AZ51 Clamp
supplied to ft 25-50 mm dia. mast
A 3-element VHF Yagi antenna for PMR/Trunked Radio and Band I Broadcast
applications. The driven element for this design is enclosed in a weather
resistant, glassfbre shroud to provide consistent, reliable performance in all
weather conditions.
Type MA421H08
REV0909
www.amphenol-jaybeam.com B-153
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
MA421H29
Shrouded Yagi Antenna
4-Element
V-Pol | 90 | 4.5 dBd
Vertical Pattern
Horizontal Pattern
68-75 MHz
Electrical Specifcations
Frequency: 68 MHz to 75 MHz
Gain: 4.5 dBd
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 90
Vertical Beamwidth: 60
Front to Back Ratio: > 15 dB
Impedance: 50 ohms
Termination: 0.65m Coaxial Cable + N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Boom, 45 mm dia. Aluminium
Elements, 14 mm dia. Aluminium
Balun, Enclosed in Glass fbre shroud
Length: 2720 mm
Weight (excluding mount): 7.8 kg
Windloading @ 45 m/s: 600 N
Mounting Bracket:
MA621AZ51 Clamp
supplied to ft 25-50 mm dia. mast
A 4-element VHF Yagi antenna for PMR/Trunked Radio and Band I Broadcast
applications. The driven element for this design is enclosed in a weather
resistant, glassfbre shroud to provide consistent, reliable performance in all
weather conditions.
Type MA421H29
REV0909
www.amphenol-jaybeam.com B-154
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
MA421LM01
Shrouded Yagi Antenna
2-Element
V-Pol | 160 | 2 dBd
Vertical Pattern
Horizontal Pattern
156-175 MHz
Electrical Specifcations
Frequency: 156 MHz to 175 MHz
Gain: 2 dBd
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 160
Vertical Beamwidth: 70
Front to Back Ratio: > 12dB
Impedance: 50 ohms
Termination: 0.65m Coaxial Cable + N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Boom, 45 mm dia. Aluminium
Elements, 14 mm dia. Aluminium
Balun, Enclosed in Glass fbre shroud
Length: 800 mm
Weight (excluding mount): 4.3 kg
Windloading @ 45 m/s: 220 N
Mounting Bracket:
MA621AZ51 Clamp
supplied to ft 25-50 mm dia. mast
A 2-element Yagi antenna for VHF Marine base station applications. The driven
element for this design is enclosed in a weather resistant, glassfbre shroud to
provide consistent, reliable performance in all weather conditions.
Type MA421LM01
REV0909
www.amphenol-jaybeam.com B-155
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
MA421LM02
Shrouded Yagi Antenna
3-Element
V-Pol | 115 | 4 dBd
Vertical Pattern
Horizontal Pattern
156-175 MHz
Electrical Specifcations
Frequency: 156 MHz to 175 MHz
Gain: 4 dBd
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 115
Vertical Beamwidth: 67
Front to Back Ratio: > 15 dB
Impedance: 50 ohms
Termination: 0.65m Coaxial Cable + N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Boom, 45 mm dia. Aluminium
Elements, 14 mm dia. Aluminium
Balun, Enclosed in Glass fbre shroud
Length: 1100 mm
Weight (excluding mount): 4.9 kg
Windloading @ 45 m/s: 250 N
Mounting Bracket:
MA621AZ51 Clamp
supplied to ft 25-50 mm dia. mast
A 3-element Yagi antenna for VHF Marine base station applications. The driven
element for this design is enclosed in a weather resistant, glassfbre shroud to
provide consistent, reliable performance in all weather conditions.
Type MA421LM02
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-156 www.amphenol-jaybeam.com
REV0909
MA421LM05
Shrouded Yagi Antenna
8-Element
V-Pol | 52 | 9 dBd
Vertical Pattern
Horizontal Pattern
156-175 MHz
Electrical Specifcations
Frequency: 156 MHz to 175 MHz
Gain: 9 dBd
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 52
Vertical Beamwidth: 45
Front to Back Ratio: > 18 dB
Impedance: 50 ohms
Termination: 0.65m Coaxial Cable + N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Boom, 45 mm dia. Aluminium
Elements, 14 mm dia. Aluminium
Balun, Enclosed in Glass fbre shroud
Length: 3150 mm
Weight (excluding mounts): 8.1 kg
Windloading @ 45 m/s: 500 N
Mounting Bracket:
MA621AZ51 Clamp
supplied to ft 25-50 mm dia. mast
An 8-element Yagi antenna for VHF Marine base station applications. The driven
element for this design is enclosed in a weather resistant, glassfbre shroud to
provide consistent, reliable performance in all weather conditions.
Type MA421LM05
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-157 www.amphenol-jaybeam.com
REV0909
MA421PR01
Shrouded Yagi Antenna
2-Element
V-Pol | 145 | 2.5 dBd
Vertical Pattern
Horizontal Pattern
400-440 MHz
Electrical Specifcations
Frequency: 400 MHz to 440 MHz
Gain: 2.5 dBd
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 145
Vertical Beamwidth: 70
Front to Back Ratio: > 12dB
Impedance: 50 ohms
Termination: 0.65m Coaxial Cable + N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Boom, 45 mm dia. Aluminium
Elements, 14 mm dia. Aluminium
Balun, Enclosed in Polyethylene shroud
Length: 520 mm
Weight (excluding mount): 3.6 kg
Windloading @ 45 m/s: 100 N
Mounting Bracket:
MA621AZ51 Clamp
supplied to ft 25-50 mm dia. mast
A 2-element UHF Yagi antenna for PMR/Trunked Radio/TETRA networks. The
driven element for this design is enclosed in a weather resistant plastic shroud
to provide consistent, reliable performance in all weather conditions.
Type MA421PR01
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-158 www.amphenol-jaybeam.com
REV0909
MA421PR03
Shrouded Yagi Antenna
4-Element
V-Pol | 90 | 5.5 dBd
Vertical Pattern
Horizontal Pattern
400-440 MHz
Electrical Specifcations
Frequency: 400 MHz to 440 MHz
Gain: 5.5 dBd
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 90
Vertical Beamwidth: 60
Front to Back Ratio: > 15 dB
Impedance: 50 ohms
Termination: 0.65m Coaxial Cable + N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Boom, 45 mm dia. Aluminium
Elements, 14 mm dia. Aluminium
Balun, Enclosed in Polyethylene shroud
Length: 750 mm
Weight (excluding mount): 4.1 kg
Windloading @ 45 m/s: 120 N
Mounting Bracket:
MA621AZ51 Clamp
supplied to ft 25-50 mm dia. mast
A 4-element UHF Yagi antenna for PMR/Trunked Radio/TETRA networks. The
driven element for this design is enclosed in a weather resistant plastic shroud
to provide consistent, reliable performance in all weather conditions.
Type MA421PR03
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-159 www.amphenol-jaybeam.com
REV0909
MA421PR04
Shrouded Yagi Antenna
6-Element
V-Pol | 70 | 7 dBd
Vertical Pattern
Horizontal Pattern
400-440 MHz
Electrical Specifcations
Frequency: 400 MHz to 440 MHz
Gain: 7 dBd
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 70
Vertical Beamwidth: 52
Front to Back Ratio: > 16 dB
Impedance: 50 ohms
Termination: 0.65m Coaxial Cable + N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Boom, 45 mm dia. Aluminium
Element, 14 mm dia. Aluminium
Balun, Enclosed in Polyethylene shroud
Length: 1050 mm
Weight (excluding mount): 5.3 kg
Windloading @ 45 m/s: 160 N
Mounting Bracket:
MA621AZ51 Clamp
supplied to ft 25-50 mm dia. mast
A 6-element UHF Yagi antenna for PMR/Trunked Radio/TETRA networks. The
driven element for this design is enclosed in a weather resistant plastic shroud
to provide consistent, reliable performance in all weather conditions.
Type MA421PR04
REV0909
www.amphenol-jaybeam.com B-160
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
MA421PR05
Shrouded Yagi Antenna
8-Element
V-Pol | 55 | 9 dBd
Vertical Pattern
Horizontal Pattern
400-440 MHz
Electrical Specifcations
Frequency: 400 MHz to 440 MHz
Gain: 9 dBd
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 55
Vertical Beamwidth: 45
Front to Back Ratio: > 18 dB
Impedance: 50 ohms
Termination: 0.65m Coaxial Cable + N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Boom, 45 mm dia. Aluminium
Elements, 14 mm dia. Aluminium
Balun, Enclosed in Polyethylene shroud
Length: 1400 mm
Weight (excluding mount): 6.3 kg
Windloading @ 45 m/s: 240 N
Mounting Bracket:
MA621AZ51 Clamp
supplied to ft 25-50 mm dia. mast
An 8-element UHF Yagi antenna for PMR/Trunked Radio/TETRA networks. The
driven element for this design is enclosed in a weather resistant plastic shroud
to provide consistent, reliable performance in all weather conditions.
Type MA421PR05
REV0909
www.amphenol-jaybeam.com B-161
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
MA421PR06
Shrouded Yagi Antenna
10-Element
V-Pol | 50 | 10 dBd
Vertical Pattern
Horizontal Pattern
400-440 MHz
Electrical Specifcations
Frequency: 400 MHz to 440 MHz
Gain: 10 dBd
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 50
Vertical Beamwidth: 43
Front to Back Ratio: > 20 dB
Impedance: 50 ohms
Termination: 0.65m Coaxial Cable + N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Boom, 45 mm dia. Aluminium
Elements, 14 mm dia. Aluminium
Balun, Enclosed in Polyethylene shroud
Length: 1800 mm
Weight (excluding mount): 7.1 kg
Windloading @ 45 m/s: 240 N
Mounting Bracket:
MA621AZ51 Clamp
supplied to ft 25-50 mm dia. mast
A 10-element UHF Yagi antenna for PMR/Trunked Radio/TETRA networks. The
driven element for this design is enclosed in a weather resistant plastic shroud
to provide consistent, reliable performance in all weather conditions.
Type MA421PR06
REV0909
www.amphenol-jaybeam.com B-162
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
MA421PR07
Shrouded Yagi Antenna
12-Element
V-Pol | 42 | 11 dBd
Vertical Pattern
Horizontal Pattern
400-440 MHz
Electrical Specifcations
Frequency: 400 MHz to 440 MHz
Gain: 11 dBd
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 42
Vertical Beamwidth: 35
Front to Back Ratio: > 20 dB
Impedance: 50 ohms
Termination: 0.65m Coaxial Cable + N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Boom, 45 mm dia. Aluminium
Elements, 14 mm dia. Aluminium
Balun, Enclosed in Polyethylene shroud
Length: 2200 mm
Weight (excluding mount): 7.8 kg
Windloading @ 45 m/s: 280 N
Mounting Bracket:
MA621AZ51 Clamp
supplied to ft 25-50 mm dia. mast
A 12-element UHF Yagi antenna for PMR/Trunked Radio/TETRA networks. The
driven element for this design is enclosed in a weather resistant plastic shroud
to provide consistent, reliable performance in all weather conditions.
Type MA421PR07
REV0909
www.amphenol-jaybeam.com B-163
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
MA421RS01
Shrouded Yagi Antenna
2-Element
V-Pol | 150 | 2.5 dBd
Vertical Pattern
Horizontal Pattern
440-470 MHz
Electrical Specifcations
Frequency: 440 MHz to 470 MHz
Gain: 2.5 dBd
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 150
Vertical Beamwidth: 65
Front to Back Ratio: > 12 dB
Impedance: 50 ohms
Termination: 0.65m Coaxial Cable + N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Boom, 45 mm dia. Aluminium
Elements, 14 mm dia. Aluminium
Balun, Enclosed Polyethylene shroud
Length: 520 mm
Weight (excluding mount): 3.6 kg
Windloading @ 45 m/s: 100 N
Mounting Bracket:
MA621AZ51 Clamp
supplied to ft 25-50 mm dia. mast
A 2-element UHF Yagi antenna for PMR/Trunked Radio/TETRA networks. The
driven element for this design is enclosed in a weather resistant plastic shroud
to provide consistent, reliable performance in all weather conditions.
Type MA421RS01
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-164 www.amphenol-jaybeam.com
REV0909
MA421RS02
Shrouded Yagi Antenna
3-Element
V-Pol | 100 | 4.5 dBd
Vertical Pattern
Horizontal Pattern
440-470 MHz
Electrical Specifcations
Frequency: 440 MHz to 470 MHz
Gain: 4.5 dBd
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 100
Vertical Beamwidth: 60
Front to Back Ratio: > 15 dB
Impedance: 50 ohms
Termination: 0.65m Coaxial Cable + N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Boom, 45 mm dia. Aluminium
Elements, 14 mm dia. Aluminium
Balun, Enclosed in Polyethylene shroud
Length: 650 mm
Weight (excluding mount): 3.8 kg
Windloading @ 45 m/s: 110 N
Mounting Bracket:
MA621AZ51 Clamp
supplied to ft 25-50 mm dia. mast
A 3-element UHF Yagi antenna for PMR/Trunked Radio/TETRA networks. The
driven element for this design is enclosed in a weather resistant plastic shroud
to provide consistent, reliable performance in all weather conditions.
Type MA421RS02
REV0909
www.amphenol-jaybeam.com B-165
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
MA421RS03
Shrouded Yagi Antenna
4-Element
V-Pol | 80 | 6 dBd
Vertical Pattern
Horizontal Pattern
440-470 MHz
Electrical Specifcations
Frequency: 440 MHz to 470 MHz
Gain: 6 dBd
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 80
Vertical Beamwidth: 57
Front to Back Ratio: > 15 dB
Impedance: 50 ohms
Termination: 0.65m Coaxial Cable + N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Boom, 45 mm dia. Aluminium
Elements, 14 mm dia. Aluminium
Balun, Enclosed in Polyethylene shroud
Length: 750 mm
Weight (excluding mount): 4.1 kg
Windloading @ 45 m/s: 120 N
Mounting Bracket:
MA621AZ51 Clamp
supplied to ft 25-50 mm dia. mast
A 4-element UHF Yagi antenna for PMR/Trunked Radio/TETRA networks. The
driven element for this design is enclosed in a weather resistant plastic shroud
to provide consistent, reliable performance in all weather conditions.
Type MA421RS03
REV0909
www.amphenol-jaybeam.com B-166
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency: 440 MHz to 470 MHz
Gain: 7.5 dBd
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 65
Vertical Beamwidth: 52
Front to Back Ratio: > 16 dB
Impedance: 50 ohms
Termination: 0.65m Coaxial Cable + N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Boom, 45 mm dia. Aluminium
Elements, 14 mm dia. Aluminium
Balun, Enclosed in Polyethylene shroud
Length: 955 mm
Weight (excluding mount): 5.3 kg
Windloading @ 45 m/s: 150 N
Mounting Bracket:
MA621AZ51 Clamp
supplied to ft 25-50 mm dia. mast
MA421RS04
Shrouded Yagi Antenna
6-Element
V-Pol | 65 | 7.5 dBd
A 6-element UHF Yagi antenna for PMR/Trunked Radio/TETRA networks. The
driven element for this design is enclosed in a weather resistant plastic shroud
to provide consistent, reliable performance in all weather conditions.
440-470 MHz
Type MA421RS04
Vertical Pattern
Horizontal Pattern
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-167 www.amphenol-jaybeam.com
REV0909
MA421RS05
Shrouded Yagi Antenna
8-Element
V-Pol | 50 | 9 dBd
Vertical Pattern
Horizontal Pattern
440-470 MHz
Electrical Specifcations
Frequency: 440 MHz to 470 MHz
Gain: 9 dBd
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 50
Vertical Beamwidth: 45
Front to Back Ratio: > 18 dB
Impedance: 50 ohms
Termination: 0.65m Coaxial Cable + N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Boom, 45 mm dia. Aluminium
Elements, 14 mm dia. Aluminium
Balun, Enclosed in Polyethylene shroud
Length: 1350 mm
Weight (excluding mount): 6.1 kg
Windloading @ 45 m/s: 240 N
Mounting Bracket:
MA621AZ51 Clamp
supplied to ft 25-50 mm dia. mast
An 8-element UHF Yagi antenna for PMR/Trunked Radio/TETRA networks. The
driven element for this design is enclosed in a weather resistant plastic shroud
to provide consistent, reliable performance in all weather conditions.
Type MA421RS05
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-168 www.amphenol-jaybeam.com
REV0909
MA421RS06
Shrouded Yagi Antenna
10-Element
V-Pol | 45 | 10 dBd
Vertical Pattern
Horizontal Pattern
440-470 MHz
Electrical Specifcations
Frequency: 440 MHz to 470 MHz
Gain: 10 dBd
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 45
Vertical Beamwidth: 39
Front to Back Ratio: > 20 dB
Impedance: 50 ohms
Termination: 0.65m Coaxial Cable + N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Boom, 45 mm dia. Aluminium
Elements, 14 mm dia. Aluminium
Balun, Enclosed in Polyethylene shroud
Length: 1700 mm
Weight (excluding mount): 7 kg
Windloading @ 45 m/s: 200 N
Mounting Bracket:
MA621AZ51 Clamp
supplied to ft on 25-50 mm dia. mast
A 10-element UHF Yagi antenna for PMR/Trunked Radio/TETRA networks. The
driven element for this design is enclosed in a weather resistant plastic shroud
to provide consistent, reliable performance in all weather conditions.
Type MA421RS06
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-169 www.amphenol-jaybeam.com
REV0909
MA421RS07
Shrouded Yagi Antenna
12-Element
V-Pol | 38 | 11 dBd
Vertical Pattern
Horizontal Pattern
440-470 MHz
Electrical Specifcations
Frequency: 440 MHz to 470 MHz
Gain: 11 dBd
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 38
Vertical Beamwidth: 35
Front to Back Ratio: > 20 dB
Impedance: 50 ohms
Termination: 0.65m Coaxial Cable + N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Boom, 45 mm dia. Aluminium
Elements, 14 mm dia. Aluminium
Balun, Enclosed in Polyethylene shroud
Length: 2100 mm
Weight (excluding mount): 7.6 kg
Windloading @ 45 m/s: 230 N
Mounting Bracket:
MA621AZ51 Clamp
supplied to ft 25-50 mm dia. mast
A 12-element UHF Yagi antenna for PMR/Trunked Radio/TETRA networks. The
driven element for this design is enclosed in a weather resistant plastic shroud
to provide consistent, reliable performance in all weather conditions.
Type MA421RS07
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-170 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency Range: 34.3...40.8 MHz
Bandwidth: 2% (typical)
Model Numbers:
Model: Operating Frequency:
MA431E35 34.3 MHz to 35.7 MHz
MA431E40 39.2 MHz to 40.8 MHz
Gain: 0 dBd
VSWR: <1.5:1
Maximum Power: 100 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 84
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Glass fbre
Aluminium mounting section
Length: 4950 mm
Weight (excluding mount): 9 kg
Windloading @ 45 m/s: 540 N
Mounting Bracket:
3 x MA621AZ00 Clamps
supplied to ft 50-70 mm dia. mast.
MA431Exx
End Fed Dipole Antenna
V-Pol | 360 | 0 dBd
Vertical Pattern
Horizontal Pattern
A rugged and durable VHF End Fed Dipole antenna housed inside a high-
strength, glassfbre shroud. Produced to the highest quality standards these
robust antenna designs will insure reliable operation in harsh environmental
conditions.
34.3...40.8 MHz
Type MA431Exx
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-171 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency: 83 MHz to 86.6 MHz
Gain: 1.5 dBd
VSWR: <1.5:1
Maximum Power: 100 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 68
Electrical Downtilt: 0
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 3900 mm
Weight (excluding mount): 4 kg
Windloading @ 45 m/s: 280 N
Mounting Bracket:
2 x MA621AZ00 Clamps
supplied to ft on 50-70 mm dia. mast
MA431H00
Colinear Antenna
V-Pol | 360 | 1.5 dBd
Vertical Pattern
Horizontal Pattern
A rugged and durable Colinear antenna designed for VHF Trunked Radio
applications. These antennas are housed inside a high-strength, glassfbre
shroud and manufactured to the highest quality standards insuring long term,
reliable operation.
83-86.6 MHz
Type MA431H00
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-172 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency Range: 143...165 MHz
Model Numbers*:
Model: Operating Frequency:
MA431KM00 143 MHz to 149 MHz
MA431KM01 150 MHz to 157 MHz
MA431KM02 158 MHz to 161 MHz
MA431KM03 165 MHz to 169 MHz
MA431KM04 159 MHz to 165 MHz
Gain: 3.5 dBd
VSWR: <1.5:1
Maximum Power: 100 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 38
Electrical Downtilt: 0
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 3500 mm
Weight (excluding mount): 4 kg
Windloading @ 45 m/s: 200 N
Mounting Bracket:
2 x MA621AZ00 Clamps
supplied with antenna
MA431Kxxx
Colinear Antenna
V-Pol | 360 | 3.5 dBd
Vertical Pattern
Horizontal Pattern
A rugged and durable VHF Colinear antenna housed inside a high-strength,
glassfbre shroud. Produced to the highest quality standards these robust antenna
designs will insure reliable operation in harsh environmental conditions.
143...165 MHz
Type MA431Kxxx
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-173 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency Range: 68...88 MHz
Model Numbers:
Model: Operating Frequency:
MA432H00 68 MHz to 73 MHz
MA432H01 73 MHz to 78 MHz
MA432H02 78 MHz to 83 MHz
MA432H03 83 MHz to 88 MHz
Gain: 0 dBd
VSWR: <1.5:1
Maximum Power: 50 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 88
Impedance: 50 ohms
Termination: N Female
Mechanical Specifcations
Materials: Aluminium dipole
Length: 2400 mm @ 80 MHz
Weight (excluding mount): 2.5 kg @ 80 MHz
Windloading @ 45 m/s: 180 N @ 80 MHz
Mounting Bracket:
MA621AZ40 Clamp
supplied to ft on 30-50 mm dia. mast
MA432H0x
End Fed Dipole Antenna
V-Pol | 360 | 0 dBd
Vertical Pattern
Horizontal Pattern
A rugged and durable VHF End Fed Dipole antenna constructed from Aluminium
tubing. Produced to the highest quality standards these robust antenna designs
will insure reliable operation in harsh environmental conditions.
68...88 MHz
Type MA432H0x
REV0909
www.amphenol-jaybeam.com B-174
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency Range: 68...88 MHz
Model Numbers:
Model: Operating Frequency:
MA432H10 68 MHz to 73 MHz
MA432H12 78 MHz to 83 MHz
MA432H13 83 MHz to 88 MHz
Gain: 0 dBd
VSWR: <1.5:1
Maximum Power: 50 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 88
Impedance: 50 ohms
Termination: N Female
Mechanical Specifcations
Materials: Stainless steel dipole
Length: 2400 mm @ 80 MHz
Weight (excluding mount): 3 kg @ 80 MHz
Windloading @ 45 m/s: 180 N @ 80 MHz
Mounting Bracket:
MA621AZ38 Clamp
supplied to ft on 30-50 mm dia. mast
MA432H1x
End Fed Dipole Antenna
Stainless Steel
V-Pol | 360 | 0 dBd
Vertical Pattern
Horizontal Pattern
A rugged and durable VHF End Fed Dipole antenna constructed from stainless
steel tubing. Produced to the highest quality standards these robust antenna
designs will insure reliable operation in harsh environmental conditions.
68...88 MHz
Type MA432H1x
REV0909
www.amphenol-jaybeam.com B-175
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency Range: 79...87 MHz
Bandwidth: 1% (typical)
Model Numbers*:
Model: Operating Frequency:
MA432H80 79 MHz to 83 MHz
MA432H85 84 MHz to 87 MHz
Gain: 1.5 dBd
VSWR: <1.5:1
Maximum Power: 100 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 68
Electrical Downtilt: 0
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 3800 mm
Weight (excluding mount): 4 kg
Windloading @ 45 m/s: 240 N
Mounting Bracket:
2 x MA621AZ00 Clamps
supplied to ft on 50-70 mm dia. mast
MA432H8x
Colinear Antenna
V-Pol | 360 | 1.5 dBd
Vertical Pattern
Horizontal Pattern
A rugged and durable Colinear antenna designed for VHF Trunked Radio
applications. These antennas are housed inside a high-strength, glassfbre
shroud and manufactured to the highest quality standards insuring long term,
reliable operation.
79...87 MHz
Type MA432H8x
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-176 www.amphenol-jaybeam.com
REV0909
MA432J00
End Fed Dipole Antenna
V-Pol | 360 | 0 dBd
Vertical Pattern
HorizontalPattern
139-153 MHz
Electrical Specifcations
Frequency: 139 MHz to 153 MHz
Gain: 0 dBd
VSWR: <1.5:1
Maximum Power: 50 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 88
Impedance: 50 ohms
Termination: N Female
Mechanical Specifcations
Materials: Aluminium dipole
Length: 1400 mm
Weight (excluding mount): 1.5 kg
Windloading @ 45 m/s: 120 N
Mounting Bracket:
MA621AZ40 Clamp
supplied to ft on 30-50 mm dia. mast
A rugged and durable VHF End Fed Dipole antenna constructed from aluminium
tubing. Produced to the highest quality standards these robust antenna designs
will insure reliable operation in harsh environmental conditions.
Type MA432J00
REV0909
www.amphenol-jaybeam.com B-177
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
MA432Kxxx
End Fed Dipole Antenna
V-Pol | 360 | 0 dBd
144...174 MHz
Electrical Specifcations
Frequency Range: 144...174 MHz
Model Numbers:
Model: Operating Frequency:
MA432KM00 144 MHz to 168 MHz
MA432KM01 168 MHz to 174 MHz
Gain: 0 dBd
VSWR: <1.5:1
Maximum Power: 50 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 88
Impedance: 50 ohms
Termination: N Female
Mechanical Specifcations
Materials: Aluminium dipole
Length: 1380 mm
Weight (excluding mount): 1.5 kg
Windloading @ 45 m/s: 120 N
Mounting Bracket:
MA621AZ40 Clamp
supplied to ft on 30-50 mm dia. mast
A rugged and durable VHF End Fed Dipole antenna constructed from aluminium
tubing. Produced to the highest quality standards these robust antenna designs
will insure reliable operation in harsh environmental conditions.
Type MA432Kxxx
Vertical Pattern
Horizontal Pattern
REV0909
www.amphenol-jaybeam.com B-178
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
MA461H01
Ground Plane Antenna
V-Pol | 360 | 0 dBd
83-87 MHz
Electrical Specifcations
Frequency: 83 MHz to 87 MHz
Gain: 0 dBd
VSWR: <1.5:1
Maximum Power: 50 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 85
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Aluminium Alloy, Glass Fibre,
and Stainless Steel
Whip Dimensions: 1540 mm
Weight (including mount): 2.2 kg
Windloading @ 45 m/s: 78 N
Mounting Bracket:
Integral mounting bracket
to ft on 30-60 mm dia. mast
A VHF Ground Plane antenna with integrated mount designed to attach to the
top of a 30 60 mm diameter mast. The active element is a folded monopole.
The ground plane elements are user-tuned to achieve best performance at the
operating frequency. Tuning chart provided.
Type MA461H01
Vertical Pattern
Horizontal Pattern
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-179 www.amphenol-jaybeam.com
REV0909
MA462DS06
Ground Plane Antenna
V-Pol | 360 | 0 dBd
Vertical Pattern
Horizontal Pattern
25...470 MHz
Electrical Specifcations
Frequency Range*: 25...470 MHz
Bandwidth: 2% (typical)
Gain: 0 dBd
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 86
Impedance: 50 ohms
Termination: UHF (SO239) Female
*Tuning chart provided. Trim whips to achieve required center frequency.
Mechanical Specifcations
Materials:
Aluminium mounting base
with glass fbre whips
Whip Dimension: 2600 mm @ 25 MHz
Weight (including mount): 2 kg @ 25 MHz
Windloading @ 45 m/s: 120 N @ 25 MHz
Mounting Bracket:
Integral bracket
to ft the top of a 40 mm dia. tube.
A VHF / UHF Ground Plane antenna with integrated mount designed to attach
to the top of a 40mm diameter mast. The radiator and ground plane elements
are of tapered glassfbre construction and are user-tuned to achieve best
performance at the operating frequency. Tuning chart provided.
Type MA462DS06
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-180 www.amphenol-jaybeam.com
REV0909
MA462DS08
Ground Plane Antenna
V-Pol | 360 | 0 dBd
Vertical Pattern
Horizontal Pattern
68...470 MHz
Electrical Specifcations
Frequency Range*: 68...470 MHz
Bandwidth: 2% (typical)
Gain: 0 dBd
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 84
Impedance: 50 ohms
Termination: UHF (SO239) Female
*Tuning chart provided. Trim whips to achieve required center frequency.
Mechanical Specifcations
Materials:
Aluminium mounting base
with glass fbre whips
Whip Dimension: 1200 m @ 68 MHz
Weight (including mount): 1.2 kg @ 68 MHz
Windloading @ 45 m/s: 72 N @ 68 MHz
Mounting Bracket:
Integral bracket
to ft the top of a 40 mm dia. pipe.
A VHF Ground Plane antenna with integrated mount designed to attach to the
top of a 40 mm diameter mast. The radiator and ground plane elements are of
tapered glassfbre construction and are user-tuned to achieve best performance
at the operating frequency. Tuning chart provided.
Type MA462DS08
REV0909
www.amphenol-jaybeam.com B-181
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency: 34 MHz to 36 MHz
Gain:
0 dBd (omni)
Will depend on mounting distance from mast.
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: Will depend on mounting distance from mast.
Vertical Beamwidth: 80
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Boom 40 mm dia. galvanised steel, Dipole
elements protected by glass fbre shroud.
Length: 3700 mm
Weight (excluding mount): 11.5 kg
Windloading @ 45 m/s: 520 N
Mounting Bracket:
MA621AZ51 Clamp
supplied to ft on 25-50 mm dia. mast.
MA481E36
Centre-Fed Dipole Antenna
Shrouded
V-Pol | Variable Az | Variable Gain
Vertical Pattern
Horizontal Pattern
A VHF Center Fed Dipole antenna for PMR/Trunked Radio applications.
Multiple dipoles can be mounted on a tower and connected with a phasing
harness to form a high gain, stacked array. The dipole element for this design is
enclosed in a weather resistant, glassfbre shroud to provide consistent, reliable
performance in all weather conditions.
34-36 MHz
Type MA481E36
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-182 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency: 39 MHz to 41 MHz
Gain:
0 dBd (omni*)
Will depend on mounting distance from mast.
VSWR: <1.5:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: Will depend on mounting distance from mast.
Vertical Beamwidth: 80
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Boom 40 mm dia. galvanised steel, Dipole
elements protected by glass fbre shroud.
Length: 3300 mm
Weight (excluding mount): 11 kg
Windloading @ 45 m/s: 460 N
Mounting Bracket:
MA621AZ51 Clamp
supplied to ft on 25-50 mm dia. mast.
MA481E41
Centre Fed Dipole Antenna
Shrouded
V-Pol | Variable Az | Variable Gain
Vertical Pattern
Horizontal Pattern
A VHF Center Fed Dipole antenna for PMR/Trunked Radio applications.
Multiple dipoles can be mounted on a tower and connected with a phasing
harness to form a high gain, stacked array. The dipole element for this design is
enclosed in a weather resistant, glassfbre shroud to provide consistent, reliable
performance in all weather conditions.
39-41 MHz
Type MA481E41
REV0909
www.amphenol-jaybeam.com B-183
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency: 68 MHz to 88 MHz
Gain:
0 dBd (omni)
Will depend on mounting distance from mast.
VSWR: <1.5:1(72-85 MHz), <2:1 (68-88 MHz)
Maximum Power: 250 W
Horizontal Beamwidth: Will depend on mounting distance from mast.
Vertical Beamwidth: 80
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Boom, 45 mm dia. Aluminium,
Dipole elements protected by glass fbre
shroud.
Length: 1860 mm
Weight (excluding mount): 4.5 kg
Windloading @ 45 m/s: 340 N
Mounting Bracket:
MA621AZ51 Clamp
supplied to ft on 25-50 mm dia. mast
MA481H02
Centre Fed Dipole Antenna
Shrouded
Variable Az | Variable Gain
Vertical Pattern
Horizontal Pattern
A VHF Center Fed Dipole antenna for PMR/Trunked Radio applications.
Multiple dipoles can be mounted on a tower and connected with a phasing
harness to form a high gain, stacked array. The dipole element for this design is
enclosed in a weather resistant, glassfbre shroud to provide consistent, reliable
performance in all weather conditions.
68-88 MHz
Type MA481H02
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-184 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency: 78 MHz to 88 MHz
Gain:
0 dBd (omni)
Will depend on mounting distance from mast.
VSWR: <1.5:1
Maximum Power: 250 W
Horizontal Beamwidth: Will depend on mounting distance from mast.
Vertical Beamwidth: 80
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Boom, 45 mm dia. Aluminium
Dipole elements protected by glass fbre
shroud.
Length: 1860 mm
Weight (excluding mount): 4.5 kg
Windloading @ 45 m/s: 340 N
Mounting Bracket:
MA621AZ51 Clamp
supplied to ft on 25-50 mm dia. mast.
MA481H04
Centre Fed Dipole Antenna
Shrouded
Variable Az | Variable Gain
Vertical Pattern
Horizontal Pattern
A VHF Center Fed Dipole antenna for PMR/Trunked Radio applications.
Multiple dipoles can be mounted on a tower and connected with a phasing
harness to form a high gain, stacked array. The dipole element for this design is
enclosed in a weather resistant, glassfbre shroud to provide consistent, reliable
performance in all weather conditions.
78-88 MHz
Type MA481H04
REV0909
www.amphenol-jaybeam.com B-185
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency: 88 MHz to 108 MHz
Gain:
0 dBd (omni)
Will depend on mounting distance from mast.
VSWR: <1.5:1
Maximum Power: 250 W
Horizontal Beamwidth: Will depend on mounting distance from mast.
Vertical Beamwidth: 80
Polarisation: Vertical
Impedance: 50 ohms
Termination: N Female
Mechanical Specifcations
Materials:
Boom, 40 mm dia. Aluminium
Dipole, 18 mm dia. Aluminium
Balun, fully moulded enclosure
Dimensions: 1400 mm
Weight (excluding mount): 2.4 kg
Windloading @ 45 m/s: 160 N
Mounting Bracket:
MA621AZ40 Clamp
supplied to ft on 30-50 mm dia. mast
MA481I00
Centre Fed Dipole Antenna
Broadband
V-Pol | Variable Az
Variable Gain
Vertical Pattern
Horizontal Pattern
A VHF Center Fed Dipole antenna for FM Broadcast applications. Multiple
dipoles can be mounted on a tower and connected with a phasing harness to
form a high gain, stacked array. Produced to the highest quality standards these
robust antenna designs will insure reliable operation in harsh environmental
conditions.
88-108 MHz
Type MA481I00
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-186 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency: 109 MHz to 135 MHz
Gain:
0 dBd (omni)
Will depend on mounting distance from mast.
VSWR: <1.5:1
Maximum Power: 250 W
Horizontal Beamwidth: Will depend on mounting distance from mast.
Vertical Beamwidth: 80
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Boom, 45 mm dia. Aluminium
Dipole elements protected by glass fbre
shroud.
Length: 1200 mm
Weight (excluding mount): 3.7 kg
Windloading @ 45 m/s: 220 N
Mounting Bracket:
MA621AZ51 Clamp
supplied to ft on 25-50 mm dia. mast
MA481J00
Centre Fed Dipole Antenna
Shrouded
Variable Az | Variable Gain
Vertical Pattern
Horizontal Pattern
A Center Fed Dipole antenna for VHF Air Band applications. Multiple dipoles
can be mounted on a tower and connected with a phasing harness to form a
high gain, stacked array. The dipole element for this design is enclosed in a
weather resistant, glassfbre shroud to provide consistent, reliable performance
in all weather conditions.
109-135 MHz
Type MA481J00
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-187 www.amphenol-jaybeam.com
REV0909
MA481Kxxx
End Fed Dipole Antenna
Stainless Steel
V-Pol | 360 | 0 dBd
144...174 MHz
Electrical Specifcations
Frequency Range: 144...174 MHz
Model Numbers:
Model: Operating Frequency:
MA481KM21 144 MHz to 168 MHz
MA481KM22 168 MHz to 174 MHz
Gain: 0 dBd
VSWR: <1.5:1
Maximum Power: 50 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 88
Impedance: 50 ohms
Termination: N Female
Mechanical Specifcations
Materials: Stainless steel dipole
Length: 1360 mm
Weight (excluding mount): 2 kg
Windloading @ 45 m/s: 120 N
Mounting Bracket:
MA621AZ38 Clamp
supplied to ft on 30-50 mm dia. mast
A rugged and durable VHF End Fed Dipole antenna constructed from stainless
steel tubing. Produced to the highest quality standards these robust antenna
designs will insure reliable operation in harsh environmental conditions.
Type MA481Kxxx
Vertical Pattern
Horizontal Pattern
REV0909
www.amphenol-jaybeam.com B-188
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
MA481Q02
End Fed Dipole Antenna
V-Pol | 360 | 0 dBd
408-428 MHz
Electrical Specifcations
Frequency: 408 MHz to 428 MHz
Gain: 0 dBd
VSWR: <1.5:1
Maximum Power: 50 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 88
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 900 mm
Weight (exlcuding mount): 0.7 kg
Windloading @ 45 m/s: 40 N
Mounting Bracket:
MA621AZ30 Clamp
supplied to ft on 30-50 mm dia. mast
A rugged and durable UHF End Fed Dipole antenna housed inside a high-
strength, glassfbre shroud. Produced to the highest quality standards these
robust antenna designs will insure reliable operation in harsh environmental
conditions.
Type MA481Q02
Vertical Pattern
Horizontal Pattern
REV0909
www.amphenol-jaybeam.com B-189
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Frequency Range*: 408...470 MHz
Bandwidth: 8 MHz
Gain: 6 dBd
VSWR: <1.5:1
Maximum Power: 50 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 16
Electrical Downtilt: 0
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
* Specify center frequency at time of order.
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 2400 mm
Weight (excluding mount): 2.7 kg
Windloading @ 45 m/s: 80 N
Mounting Bracket:
MA621AZ30 Clamp
supplied to ft on 30-50 mm dia. mast.
MA481QS06
Colinear Antenna
V-Pol | 360 | 6 dBd
Vertical Pattern
Horizontal Pattern
A rugged and durable UHF Colinear antenna housed inside a high-strength,
glassfbre shroud. Produced to the highest quality standards these robust antenna
designs will insure reliable operation in harsh environmental conditions.
408...470 MHz
Type MA481QS06
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-190 www.amphenol-jaybeam.com
REV0909
MA481S02
End Fed Dipole Antenna
V-Pol | 360 | 0 dBd
Vertical Pattern
Horizontal Pattern
440-470 MHz
Electrical Specifcations
Frequency: 440 MHz to 470 MHz
Gain: 0 dBd
VSWR: <1.5:1
Maximum Power: 50 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 88
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials:
Glass fbre shroud
Aluminium mounting section
Length: 900 mm
Weight (excluding mount): 0.7 kg
Windloading @ 45 m/s: 40 N
Mounting Bracket:
MA621AZ30 Clamp
supplied to ft on 30-50 mm dia. mast
A rugged and durable UHF End Fed Dipole antenna housed inside a high-
strength, glassfbre shroud. Produced to the highest quality standards these
robust antenna designs will insure reliable operation in harsh environmental
conditions.
Type MA481S02
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-191 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Frequency Range: 406...470 MHz
Available Sub-bands*:
406 MHz to 428 MHz
420 MHz to 445 MHz
440 MHz to 470 MHz
Gain: 10 dBd
VSWR: <1.5:1
Maximum Power: 100 W
Polarisation: Vertical
Horizontal Beamwidth: 50
Vertical Beamwidth: 60
Front to Back Ratio: 20 dB
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
* Please specify desired frequency band at time of order.
Mechanical Specifcations
Materials:
Radiator elements sealed in glass fbre tube
Refector assembly, Aluminium
Length: 1360 mm
Weight (including mount): 3.6 kg
Windloading @ 45 m/s: 300 N
Mounting Bracket: U Bolts supplied to ft on 30-50 mm dia. mast.
MA491QS10
Corner Refector Antenna
V-Pol | 50 | 10 dBd
Vertical Pattern
Horizontal Pattern
A UHF Corner Refector antenna designed for TETRA networks. This antenna
provides approximately the same gain as an 8-Element Yagi antenna but with
improved F/B ratio and reduced sidelobes in the horizontal plane. Produced to
the highest quality standards these robust antenna designs will insure reliable
operation in harsh environmental conditions.
406...470 MHz
Type MA491QS10
REV0909
www.amphenol-jaybeam.com B-192
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
MA521F00
Ground Plane Antenna
V-Pol | 360 | 0 dBd
40-48 MHz
Electrical Specifcations
Frequency: 40 MHz to 48 MHz
Gain: 0 dBd
VSWR: < 2:1
Maximum Power: 250 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 84
Impedance: 50 ohms
Termination: N Female
Lightning Protection: DC Grounded
Mechanical Specifcations
Materials: Aluminium Alloy and Glass fbre
Whip Dimensions: 3000 mm
Weight (including mount): 3.5 kg
Windloading @ 45 m/s: 440 N
Mounting Bracket:
Integral mounting bracket
to ft on 30-60 mm dia. mast
A rugged and durable VHF Ground Plane antenna with integrated mount
designed to attach to the top of a 30 60 mm diameter mast. The broadband
active element is enclosed inside a glassfbre shroud to provide extra protection
in harsh environments.
Type MA521F00
Vertical Pattern
Horizontal Pattern
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-193 www.amphenol-jaybeam.com
REV0909
MA521J00
End Fed Dipole Antenna
V-Pol | 360 | 0 dBd
118-136 MHz
Electrical Specifcations
Frequency Range: 118 MHz to 136 MHz
Gain: 0 dBd
VSWR: <1.5:1
Maximum Power: 50 W
Polarisation: Vertical
Horizontal Beamwidth: 360
Vertical Beamwidth: 88
Impedance: 50 ohms
Termination: N Female
Mechanical Specifcations
Materials: Aluminium dipole
Length: 1510 mm
Weight (excluding mount): 1.7 kg
Windloading @ 45 m/s: 133 N
Mounting Bracket:
MA621AZ40 Clamp
supplied to ft on 30-50 mm dia. mast
A rugged and durable VHF End Fed Dipole antenna constructed from aluminium
tubing. Produced to the highest quality standards these robust antenna designs
will insure reliable operation in harsh environmental conditions.
Type MA521J00
Vertical Pattern
Horizontal Pattern
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-194 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Model Numbers*:
(Others are available)
Model: Frequency Range:
MMU2 068 68 MHz to 88 MHz
MMU2 088 88 MHz to 108 MHz
MMU2 126 115 MHz to 145 MHz
MMU2 140 144 MHz to 175 MHz
MMU2 180 180 MHz to 220 MHz
MMU2 405 380 MHz to 430 MHz
MMU2 420 420 MHz to 470 MHz
Inherent Insertion loss: 3.0 dB
Additional loss: 0.15 dB
VSWR: 1.2:1
Impedance: 50 ohms
Splitter power rating (CW): 200 W
RF Connectors:
N Female on downlead,
N Male on antenna leads
Dimensions (length, max): 1400 mm
Weight: 0.65 kg
Environmental: IP65
MMU2xxx
Wide Band VHF & UHF Bands
2 Way Phasing Harnesses
These two way, wide band phasing and matching harnesses cover the
frequency range 48 MHz to 800 MHz making them suitable for use in the PMR,
Broadcasting (Band II and DAB), Ground to Air, Marine and TETRA bands. They
are made from high quality components including specially made coaxial cable
to produce the correct transformation ratios. Epoxy potted junctions ensure
complete weather protection.
These phasing and matching harnesses can be used to combine 2 antennas
into one output or to split an antenna signal into two paths.
48-800 MHz
Type MMU2xxx
REV0909
www.amphenol-jaybeam.com B-195
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
Electrical Specifcations
Model Numbers*:
(Others are available)
Model: Frequency Range:
MMU3 072 66 MHz to 80 MHz
MMU3 082 74 MHz to 89 MHz
MMU3 088 88 MHz to 108 MHz
MMU3 118 118 MHz to 136 MHz
MMU3 160 144 MHz to 175 MHz
MMU3 176 176 MHz to 192 MHz
MMU3 415 380 MHz to 430 MHz
MMU3 450 406 MHz to 470 MHz
Inherent Insertion loss: 4.5 dB
Additional loss: 0.45 dB
VSWR: 1.2:1
Impedance: 50 ohms
Splitter power rating (CW): 200 W
RF Connectors:
N Female on downlead,
N Male on antenna leads
Dimensions (length, max):
3800 mm @ 70 MHz
1300 mm @ 450 MHz
Weight:
2.3 kg @ 70 MHz
1.0 kg @ 450 MHz
Environmental: IP65
MMU3xxx
Wide Band VHF & UHF Bands
3 Way Phasing Harnesses
These three way, wide band phasing and matching harnesses cover the
frequency range 68 MHz to 470 MHz making them suitable for use in the PMR,
Broadcasting (Band II and DAB), Ground to Air, Marine and TETRA bands. They
are made from high quality components including specially made coaxial cable
to produce the correct transformation ratios. Epoxy potted junctions ensure
complete weather protection.
These phasing and matching harnesses can be used to combine 3 antennas
into one output or to split an antenna signal into three paths.
68-470 MHz
Type MMU3xxx
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
B-196 www.amphenol-jaybeam.com
REV0909
Electrical Specifcations
Model Numbers*:
(Others are available)
Model: Frequency Range:
MMU4 066 66 MHz to 80 MHz
MMU4 081 74 MHz to 88 MHz
MMU4 098 88 MHz to 108 MHz
MMU4 125 118 MHz to 136 MHz
MMU4 140 144 MHz to 175 MHz
MMU4 405 380 MHz to 430 MHz
MMU4 400 406 MHz to 470 MHz
Inherent Insertion loss: 6.0 dB
Additional loss: 0.55 dB
VSWR: 1.2:1
Impedance: 50 ohms
Splitter power rating (CW): 200 W
RF Connectors:
N Female on downlead,
N Male on antenna leads
Dimensions (length, max):
6700 mm @ 70 MHz
1450 mm @ 450 MHz
Weight:
(Frequency dependant)
4.5 kg @ 70 MHz
1.3 kg @ 450 MHz
Environmental: IP65
MMU4xxx
Wide Band VHF & UHF Bands
4 Way Phasing Harnesses
These four way, wide band phasing and matching harnesses cover the
frequency range 68 MHz to 470 MHz making them suitable for use in the PMR,
Broadcasting (Band II and DAB), Ground to Air, Marine and TETRA bands. They
are made from high quality components including specially made coaxial cable
to produce the correct transformation ratios. Epoxy potted junctions ensure
complete weather protection.
These phasing and matching harnesses can be used to combine 4 antennas
into one output or to split an antenna signal into four paths.
68-470 MHz
Type MMU4xxx
Amphenol
Telecom Solutions
B-197
Whip Antenna for GSM/AMPS/ETACS
Characteristics
Frequency Band 860~960 MHz
1770~1880 MHz
Impedance 50
Gain (dB) 3Db
Radiation Pattern Omni-directional
Polarization Vertical
VSWR 2.0:1
Description
1 Top: P.A. Delrin, Black
2 Whip: Stainless, Black
3 Screw: Brass, Black
4 Body: P.A., Black
5 Mini-magnet 22 x 3t
6 Sucker: Rubber, Black
7 Cable: RG174U, Black 3 meters
8
Connector Part Number:
FME Jack
GAN 30001
SMA Plug
GAN 30010
MCX Plug
GAN 30029
3 meter cable only GAN 30038
Whip Antenna for GSM
Characteristics
Frequency Band 850/900 MHz 25
Impedance 50
Gain (dB) 3dB
Radiation Pattern Omni-directional
Polarization Vertical
VSWR 2.0:1
Part Number: GAN 30003
Description Part Number: GAN 30020
1 Connector - See Diagrams 6 Connect White POM
2 Centre Pin Ni 7 Base BSBM Ni
3 Sleeve White POM 8 Wire SWRM
4 Connect BSBM Ni 9 Cover Black TPU
5 Spring PBW Part Number: GAN 30053
Short Whip Antenna for GSM/AMPS/ETACS
Characteristics
Frequency Band 860~960 MHz
1770~1880 MHz
Impedance 50
Gain (dB) 2.15dB
Radiation Pattern Omni-directional
Polarization Vertical
VSWR 2.0:1
Description
1 Body: PNTR, Black
2 Coil: Phosphor Bronze
3 Mini-Magnet 22 x 3t
4 Cable: RG174U, Black 3 meters
5
Connector Part Number:
SMA Plug
GAN 30017
SMB Plug
GAN 30022
R/A SMA Plug
GAN 30031
FME Jack
GAN 30056
3 meter lead only GAN 30019
AMTA
Amphenol
Telecom Solutions
B-198
Swivel Antenna 45~90 for GSM/DCS
Part Number: GAN 30069
Characteristics
Frequency Band 900/1800 MHz 25
Impedance 50
Gain (dB) 5dBi
Radiation Pattern Omni-directional
Polarization/Length Vertical 5/8 Dipole
VSWR 2.0:1
Power Radiation 5W
Operating Temp -20C~65C
Description
1 Antenna Cover Black PU
2 Swivel Mechanism Black PC
3 Swivel Mechanism Black PC
4 TNC Plug Gold Plated Brass
Part Number: GAN 30070
Characteristics
Frequency Band 900/1800 MHz 25
Impedance 50
Gain (dB) 2dBi
Radiation Pattern Omni-directional
Polarization/Length Vertical 1/4 Dipole
VSWR 2.0:1
Power Radiation 3W
Operating Temp -20C~65C
Description
1 Antenna Cover Black PU
2 Swivel Mechanism Black PC
3 Swivel Mechanism Black PC
4 SMA Plug Brass Black
Swivel Antenna 45~90 for WiFi/Blue
Part Number: GAN 30074
Characteristics
Frequency Band 2.45 GHz 50
Impedance 50
Gain (dB) 5dBi
Radiation Pattern Omni-directional
Polarization/Length Vertical 5/8 Dipole
VSWR 2.0:1
Power Radiation 5W
Operating Temp -20C~65C
Description
1 Antenna Cover Black PU
2 Swivel Mechanism Black PC
3 Swivel Mechanism Black PC
4 TNC Reverse Plug Gold Plated Brass Black
Part Number: GAN 30075
Characteristics
Frequency Band 2.45 GHz 50
Impedance 50
Gain (dB) 2dBi
Radiation Pattern Omni-directional
Polarization/Length Vertical 1/4 Dipole
VSWR 2.0:1
Power Radiation 3W
Operating Temp -20C~65C
Description
1 Antenna Cover Black PU
2 Swivel Mechanism Black PC
3 Swivel Mechanism Black PC
4 SMA Reverse Plug Brass Black
Swivel Antenna 45~90 433/868MHz
Part
Numbers:
GAN 30076 433 MHz / 0dBi
GAN 30077 868 MHz / 2dBi
Characteristics
Frequency Band 433 & 868 MHz see P/N
Impedance 50
Gain (dB) 0dBi & 2dBi see P/N
Radiation Pattern Omni-directional
Polarization/Length Vertical 1/4 Dipole
VSWR 2.0:1
Power Radiation 5W
Operating Temp -20C~65C
Description
1 Antenna Cover Black PU
2 Swivel Mechanism Black PC
3 Swivel Mechanism Black PC
4 TNC Plug Gold Plated Brass Black
AMTA
Amphenol
Telecom Solutions
B-199
Flat Antenna for GSM/DCS
Characteristics
Frequency Band 860~960/1710~1880 MHz
Impedance 50
Gain 0dBi
Radiation Pattern Omni-directional
Polarization Vertical
VSWR 2.0:1
Cable RG174U
Connector See Below
Connector Part Numbers:
SMA Plug
GAN30023
BNC Plug
GAN 30041
1 Meter Cable Only GAN 30042
Cling-On for GSM/DCS
Characteristics
Frequency Band 840~960/1760~1860 MHz
Impedance 50
Gain 2.5dBi
Radiation Pattern Omni-directional
Polarization Vertical
VSWR 1.5:1
Cable RG174U
Connector FME Jack
Part Number:
GAN30050
Mini Me External Stubby for GSM/DCS
GSM
Characteristics
Frequency Band 850/900 MHz 25
Impedance 50
Gain 0dBi
Radiation Pattern Omni-directional
Polarization Vertical
VSWR 2.0:1
Part Number:
GAN 30018
Description
1 Tube P.U. Blue 5 Antenna Base BSBM Ni
2 SUS Spring 6 Base POM Black
3 Spring Base BSBM 7 SMA BSBM Ni
4 Sleeve POM White
LMR/AMPS/GSM
Characteristics
Frequency Band 850/900 MHz 25
Impedance 50
Gain 0dBi
Radiation Pattern Omni-directional
Polarization Vertical
VSWR 2.0:1
Description
1 Tube P.U. Blue
2 SUS Spring
3 See Diagram Part Numbers: GAN 30021 GAN 30034 GAN 30048
GSM/DCS
Characteristics
Frequency Band 900/1800 MHz 20
Impedance 50
Gain 0dBi
Radiation Pattern Omni-directional
Polarization Vertical
VSWR 2.0:1
Description
1 Base SMA Plug BSBM Copper Nickel Plated 2 Sleeve POM White
3 Centre Pin BSBM Copper Nickel Plated 4 Spring PBW
5 Tube PU Black Part Number: GAN 30052
AMTA
Amphenol
Telecom Solutions
B-200
GPS Antenna Active Antenna
Electrical Characteristics
Frequency 1575.Hz 1.023MHz
Impedance 50
Voltage Range 5.5V
System Gain 90 33dB
Noise Figure FO 1.7dB
Polarization R.H.C.P.
VSWR 2.0:1
Mechanical Characteristics
Cable RG174
Connector SMA Plug Gold Plated
Mounting Magnet
Operating Temp -40C ~ 85C Part Number: GAN 30013
Mini GPS Dielectric Patch Antenna
Electrical Characteristics
Frequency 1575Hz (10MHz Bandwidth)
LNA 2 Stage Active
Filters Dual, BPF/LPF
Protection 10W nSec Spark Gap
Impedance 50
Voltage Range 2.5~12 Vdc (Autoswitch)
Power Consumption 5~11mA max
Overall Gain 28dB (includes 4dB cable Loss)
Elevation Coverage 5~90
Azimuth Coverage 360
Polarization R.H.C.P.
VSWR 2.0:1
Mechanical Characteristics Part Numbers:
Cable RG174
Mount Magnet
Dome PNTR Black
Operating Temp -30C ~ 85C
GAN 30039 GAN 30043
5 Meter Cable
only
SMA Plug
Enterprise GPS/GSM Antenna
Electrical Characteristics
GPS 1575Hz (10MHz Bandwidth)
GSM 870~960/1710~1880MHz
GPS Gain 26dB
GSM Gain 0dB
Impedance 50
Voltage Range 3~5 Vdc
Power Consumption 18mA max
Overall Gain 28dB (includes 4dB cable Loss)
Elevation Coverage 5~90
Azimuth Coverage 360
GPS Polarization R.H.C.P.
GSM Polarization Omni-directional Linear
VSWR 2 Typical
Part Number:
SAN 10002
GPS
SMA Plug
GSM
FME Jack
SAN 10011
GPS
SMB
GSM
MCX Plug
SAN 10012
2 meter cable only
Mechanical Characteristics
Cable RG174
Mount Magnet
Dome ABS
Operating Temp -30C ~ 85C
GPS/GSM Alternate Packaged Antennas
Part Number: PALGSBSxxxx Part Number: PALGSBTxxxx Part Number: PALGSSTxxxx
Specifications similar to Enterprise Antenna. Consult representative for cable length and connector option to replace xxxx in part number.
AMTA / SAW
Amphenol
Telecom Solutions
Connectors
- Table of Contents
Selection Chart Connector Images Page C1
Selection Chart Continued Frequency Range Chart Page C2
1.0/2.3 Miniature 50 Ohm Coaxial Push-Pull Connectors Page C3
1.6/5.6 Miniature 75 Ohm Coaxial Connectors Pages C4 C5
7/16 High Power RF Connector Pages C6 C8
BNC 31 Series Bayonet Lock RF Connector System Pages C9 C14
BNC Patch Panels With Jack to Jack Bulkhead Adapters Page C14
Filtered BNC Bayonet Lock RF Connector System with Filtering Pages C15 C16
N-Type High Power RF Connector Pages C17 C21
SMA 901 Series 50 Ohm Pages C22 C24
TNC 31 Series Threaded Lock RF Connector System Pages C25 C27
Terminators and Accessories for RF Connectors Page C28
Between Series Adapters Pages C29 C31
Notice
Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All
statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or
responsibility of any kind expressed or implied.
Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of
patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or
that other measures may not be required. Specifications are typical and may not apply to all products.
Amphenol
Telecom Solutions
C-1
Selection Chart Connector Images
1.0/2.3 1.6/5.6 7/16 AFI AMC/MHC
BNC BNC Reverse Polarity BNC Slimline F-Type FAKRA
FME MCX MMCX N-Type QDS
QMA SMA SMA Reverse Polarity SMB SMB Mini 75
SMC SMP SSMB SSMB Mini TNC
TNC Mini TNC Reverse Polarity TwinAxial UHF UHF Mini
Amphenol
Telecom Solutions
C-2
Selection Chart Continued Frequency Range Chart
Military Aerospace
mm
Electronic Warfare
A
P
C
2
.
4
40GHz
S
M
P
Test & Measurement
Ka
High Frequency
Communication
A
P
C
3
.
5
26GHz
K
Instrumentation
18GHz
A
P
C
-
7
S
M
A
o
r
R
P
S
M
A
Satcom (downlink)
Test & Measurement
Ku
Police Radar
Microwave Radio Links
12GHz
Airborne Radar
Navigation Radar
X
Antenna
Base Stations
N
-
T
y
p
e
T
N
C
o
r
R
R
T
N
C
1
.
0
/
2
.
3
S
M
C
S
S
M
B
8GHz
C
Satcom (uplink)
7
/
1
6
Q
M
A
A
F
I
M
H
C
/
A
M
C
M
C
X
M
M
C
X
4GHz
Telecommunications
B
N
C
o
r
R
P
B
N
C
S
M
B
F
A
K
R
A
Q
D
S
Airport Search Radar
S
Test & Measurement
Datacom
F
F
M
E
M
i
n
i
U
H
F
M
i
n
i
S
M
B
2GHz
Cable TV
Mobile Radio
L
Body Scanners
1GHz
1
.
6
/
5
.
6
S
l
i
m
L
i
n
e
B
N
C
M
i
n
i
T
N
C
Broadcast TV
UHF
LAN
U
H
F
300MHz
T
w
i
n
A
x
Point to Point
T
w
i
n
B
N
C
Cable Routers
LAN VHF
Impedance () 5
0
5
0
5
0
5
0
5
0
5
0
5
0
5
0
5
0
5
0
5
0
5
0
5
0
/
7
5
5
0
5
0
5
0
5
0
/
7
5
5
0
5
0
5
0
7
5
5
0
5
0
7
5
7
5
7
5
7
5
5
0
7
8
/
9
5
7
8
/
9
5
S
e
e
D
e
f
i
n
i
t
i
o
n
s
f
o
r
c
o
d
e
d
e
t
a
i
l
s
VSWR (straight) A
1
.
5
1
.
0
1
.
0
1
.
3
1
.
3
1
.
3
1
.
3
1
.
3
1
.
1
1
.
3
B
B
1
.
3
1
.
3
1
.
2
1
.
3
1
.
4
1
.
4
1
.
1
C
*
1
.
3
1
.
4
1
.
3
1
.
2
1
.
2
*
*
*
Voltage (peak)
4
0
0
5
0
0
5
0
0
1
0
0
0
5
0
0
1
5
0
0
5
0
0
3
5
0
3
3
5
*
2
7
0
0
3
3
5
9
5
W
*
3
3
5
5
0
0
1
0
0
3
3
5
3
3
5
1
0
0
0
1
5
W
*
3
3
5
3
3
5
3
3
0
4
0
0
4
0
0
5
0
0
5
0
0
1
0
0
Temperature Range 5 8 5 7 2 2 2 3 2 2 3 1 2 1 2 1 2 2 2 1 6 5 5 2 3 1 1 4 5 2
Cable Termination R B R C S T T S S S T S B X S S T S S S U S W S W W W S X X
Coupling T X T T T T T Y T S T S S S S S B S S P P T T S T B T T T B
Cycles
*
5
0
0
*
5
0
0
0
5
0
0
5
0
0
5
0
0
5
0
0
5
0
0
5
0
0
5
0
0
1
0
0
1
0
0
3
0
5
0
0
5
0
0
5
0
0
1
0
0
1
0
0
5
0
0
*
*
*
5
0
0
5
0
0
5
0
0
5
0
0
*
*
*
Mating area D
(mm)
6
4
9
2
0
6
1
6
1
1
5
4
4
2
4
1
0
5
2
5
3
1
1
4
4
1
6
9
9
9
4
9
8
8
1
4
1
9
1
0
Page
*
*
*
*
C
-
2
4
C
-
1
7
C
-
2
5
C
-
3
*
*
C
-
6
*
*
*
*
*
C
-
1
1
*
*
*
*
*
*
*
C
-
4
*
*
*
*
*
* Consult Representative Information shown is generalized, further options available
Definitions
VSWR Temperature Range Cable Termination Coupling
A: Return Loss @ 50GHz - >26dB
B: -25dB @ 1GHz
C: Return Loss @ 1GHZ - 30dB
1: -40C to +90C
2: -65C to +165C
3: -40C to +155C
4: -55C to +149C
5: -55C to +85C
6: -40C to +60C
7: -13C to +33C
8: -55C to +165C
R: Rigid Cable
B: Board to Board
C: Clamp/Crimp
S: Crimp/Solder
T: Clamp/Crimp/Solder
U: Solder
W: Crimp
X: Clamp
X: Supplied Terminated
T: Threaded
B: Bayonet
P: Push-On
S: Snap-On
X: Push-On or Snap-On
Y: Threaded Push-On or Snap-On
Considerations When Choosing A Connector
The primary factors to consider when choosing a RF connectors are cable and frequency range. It is good practice to match the connector and cable diameters to
reduce reflection. Smaller connectors perform better at higher frequencies. For frequencies greater than 26GHz, an airline connector may be needed. Push-
On/Snap-On or bayonet coupled connectors are more suited to lower than 6GHz frequencies and threaded for higher frequencies. Connector impedance must
match the cable unless the frequency is below 500MHz where 50 connectors can be used in a 75 application and visa versa. Generally 50 connectors are
cheaper than 75. Reflection Coefficient, VSWR (Voltage Standing Wave Ratio) and Return Loss are important consideration, consult Amphenol for help. Power
and Voltage are also a factor. For high power applications large diameter connectors must be used.
Amphenol
Telecom Solutions
C-3
1.0/2.3 Miniature 50 Ohm Coaxial Push-Pull Connectors
Materials Electrical Environmental
Body Parts (Male) Brass Nickel Finish
Body Parts (Female) Brass Au/Ni Finish
Contacts
Outer MALE P/B Gold Finish
Centre MALE Brass Gold Finish
Centre FEMALE Beryllium Copper/Au
Insulator PTFE
Crimp Ferrules* Annealed Copper/Ni
Impedance 50 ohm
Frequency range 0-4 GHz
Voltage 350 VRMS max sea-level
Dielectric withstand 750 VRMS max sea-level
VSWR Straight 1.3
R/A 1.5
Resistance Centre 6 Milliohms max
Outer 3 Milliohms max
Insulator 1000 Megaohms min
Temp. range -40C thru 155C
Durability
500 cycles
Related Information
Hand Tools Section F
Termination Instr. Section G
Terminology Section J
Crimp/Crimp Straight Plug
Termination Instruction E
Crimp/Crimp Straight Jack
Termination Instruction E
Crimp/Crimp Straight Bulkhead Jack
Termination Instruction E
1231121A1N3GT30Gxxx50 1231121B1N3GT30Gxxx50 1026421A1N3GT30Gxxx50
Part Number: Description: Part Number: Description: Part Number: Description:
1021121A01RFX RG/U: 174, 188, 316 1021121B01RFX RG/U: 174, 188, 316 - Ni 1026421A01RFX RG/U: 174, 188, 316 - Ni
1021121A02RFX RG/U: 196A 1021121B02RFX RG/U: 196A 1026421A02RFX RG/U: 196A
(Dimensions in Inches)
Straight Bulkhead Jack for PCB Right Angle Bulkhead Jack for PCB
50 Terminator
1026251L1N3GT30G50 1026252L1N3GT30G50
Part Number: Description: Part Number: Description: Part Number: Description:
1026251L01RFX 3.6mm legs 1026252L01RFX 3.6mm Legs 102799050 Straight Push-Pull
Straight Cable Plugs Right Angle Cable Plugs and Jacks
Part Number: Description Cable Termination Part Number: Description Cable Termination
10279941
Push-Pull
.141 S/R RG 402
Solder/ Solder
102799118
Push-Pull Plug
Mini Coax
Crimp/Solder
10279985 .085 S/R RG 405 102799104 RG58
10279904 RG58 Crimp/ Crimp 102799116DB RD316
10279904DB RG142B
Crimp/Solder
102799104DB RG55/142
10279916DB RG 316 Double Braid 102799116 RG316
10277920 LMR200 102799185 .085 S/R RG 405
Solder/Solder
10277948 LMR240 102799141 .141 S/R RG 402
10279906
RG174/179/188/316
L910/22
Crimp/Crimp
10291006
RG174/179/188/316
L910/22
Crimp/Solder
10279934
L910/34 L910/39
RG180
10291034
L910/34 L910/39
RG180
10292006
Screw-On
RG174/179/188/316
L910/22
10290706
Jack
RG174/179/188/316
L910/22
Crimp/Solder
10292034
L910/34 L910/39
RG180
10290734
L910/34 L910/39
RG180
Straight Cable Jacks Alternate Terminated Jacks
Part Number: Description Cable Termination Part Number: Description
10291306
Bulkhead
RG174/179/188/316
L910/22 Crimp/Solder
10281103 Press-Fit Straight PCB Bulkhead
10291318 Mini Coax 10281106 Straight PCB Press-Fit
10224641 .141 S/R RG 402
Solder/Solder
10269201 Straight PCB
10224685 .085 S/R RG 405 10223301 Straight 4-Hole Flange Mount
10224341 .141 S/R RG 402 10224501 Right Angle 4-Hole Flange Mount
10291306DB 4 Hole Flange RG 316 Double Braid Crimp/Solder
ARFA /RF
Amphenol
Telecom Solutions
C-4
Amphenol Africa, Tel: +27 11 783 9517, Fax: +27 11 783 9519, Cell: +27 83 442 0514, Email: paule@AmphenolAfrica.com
1.6/5.6 Miniature 75 Ohm Coaxial Connectors
Materials Electrical Environmental
Body Parts (Male) Brass Nickel Finish
Body Parts (Female) Brass Au/Ni Finish
Contacts
Outer MALE P/B Gold Finish
Centre MALE Brass Gold Finish
Centre FEMALE p/b Gold Finish
Insulator PTFE
Crimp Ferrules* Annealed Copper/Ni
Impedance 75 ohm
Frequency range 0-1 GHz
Voltage 335 VRMS max sea-level
Dielectric withstand 1000 VRMS max sea-level
VSWR Straight 1.3
R/A 1.5
Resistance Centre 4 Milliohms max
Outer 2 Milliohms max
Insulator 1000 Megaohms min
Temp. range -40C thru 155C
Durability
500 cycles
Related Information
Cable
Section D
Hand Tools Section F
Termination Instr. Section G
Terminology Section J
Crimp/Crimp Straight Plug
Termination Instruction E
Crimp/Crimp R/A Bulkhead Jack
Termination Instruction E
Crimp/Crimp Straight Bulkhead Jack
Termination Instruction E
1561121A1N3GT3Gxxx75 1566412A1N3GT3Gxxx75 1566421A1N3GT3Gxxx75
Part Number: Description: Part Number: Description: Part Number: Description:
1561121A01RFX RG/U: 59 1566412A01RFX RG/U: 59 1566421A01RFX RG/U: 59
1561121A02RFX RG/U: 179 1566412A02RFX RG/U: 179 1566421A02RFX RG/U: 179
15692934 L910/34, L910/39 BT3002 15666034 L910/34, L910/39 BT3002 15693134 L910/34, L910/39 BT3002
Crimp/Crimp Right Angle Plug
Termination Instruction E
Clamp/Solder Straight Plug
Termination Instruction Q
Clamp/Solder Straight Bulkhead Jack
Termination Instruction Q
1561112A1N3GT3Gxxx75 1561141A1N3GT3Gxxx75 1566441A1N3GT3Gxxx75
Part Number: Description: Part Number: Description: Part Number: Description:
1561112A01RFX RG/U: 59 1561141A01RFX RG/U: 59 1566441A01RFX RG/U: 59
1561112A02RFX RG/U: 179 1561141A02RFX RG/U: 179 1566441A02RFX RG/U: 179
15665734 L910/34, L910/39 BT3002
Clamp/Solder Right Angle Plug
Termination Instruction Q
Clamp/Solder Right Angle Bulkhead Jack
Termination Instruction Q Straight Bulkhead Jack for PCB
1561142A1N3GT3Gxxx75 1566442A1N3GT3Gxxx75 1566252M1N3GT3G75
Part Number: Description: Part Number: Description: Part Number: Description:
1561142A01RFX RG/U: 59 1566442A01RFX RG/U: 59
1566251M01RFX Gold Finish (Au)
1561142A02RFX RG/U: 179 1566442A02RFX RG/U: 179
ARFA/RF
Amphenol
Telecom Solutions
C-5
1.6/5.6 Miniature 75 Ohm Coaxial Connectors Continued
Clamp/Solder Right Angle Plug
Termination Instruction Q
Clamp/Solder Right Angle Bulkhead Jack
Termination Instruction Q Straight Bulkhead Jack for PCB
1561142A1N3GT3Gxxx75 1566442A1N3GT3Gxxx75 1566252M1N3GT3G75
Part Number: Description: Part Number: Description: Part Number: Description:
1561142A01RFX RG/U: 59 1566442A01RFX RG/U: 59
1566251M01RFX Gold Finish (Au)
1561142A02RFX RG/U: 179 1566442A02RFX RG/U: 179
Right Angle Bulkhead Jack for PCB Plug to Plug Adapter Plug to Plug U Link Adapter
1566252M1N3GT3G75 1562071A1N3GT3G75 1562076A1N3GT3G75
Part Number: Description: Part Number: Description: Part Number: Description:
1566252M01RFX Gold Finish (Au) 1562071A01RFX Gold Finish (Au) 1562076A01RFX Gold Finish (Au)
Plug to Jack to Plug Y Link Adapter Jack to Jack Bulkhead Adapter Jack to Jack to Jack Y Link Adapter
1564077A1N3GT3G75 1567471A1N3GT3G75 1568077A1N3GT3G75
Part Number: Description: Part Number: Description: Part Number: Description:
1564077A01RFX Gold Finish (Au) 1567471A01RFX Gold Finish (Au) 1568077A01RFX Gold Finish (Au)
ARFA/RF
Amphenol
Telecom Solutions
C-6
7/16 High Power RF Connector
Electrical Materials Environmental
Impedance 50
Frequency range 1 MHz - 6 GHz
Voltage 2700 VRMS max sea level
Dielectric withstand 4000 VRMS max sea level
VSWR 1.1 max (3 GHz)
1.22 max (3-11 GHz)
Resistance Inner 0.5 m max
Outer 0.2 m max
Insulator 10000 M min
Body Brass (Spec: C3602)
Finish Silver or White Bronze
Contacts/Finish
Centre MALE Brass (Spec: C3602)
Centre FEMALE Cubez (Spec: Qbe2)
Bronze (Spec: QSn6.5)
Insulator PTFE
Spring Ring Heat Treated
Gasket Silicone Rubber
Crimp Ferrules AnnealedCopper/Silver
Temp. range -65C thru 165C
Shock Consult Rep.
Humidity Consult Rep.
Vibration Consult Rep.
Corrosion Consult Rep.
Connectors with O-ring offer IP67 protection
Mechanical Related Information
Unter Rententivity > 6N
Hardness > 1000 Times for drawing
Cable Section D
Hand Tools Section F
Termination Instr. Section G
Terminology Section J
7/16 High Power RF Connector Cable Mount Plugs
Termination Instruction E Termination Instruction R
Part Number: Description: Part Number: Description:
716-1111A-01RFX 7/16 Plug for RG214U Coaxial Cable. 716-1142A-01RFX 7/16 R/A Plug for Superflexible Coaxial Cable.
Termination Instruction DD Termination Instruction DD Termination Instruction X
Part Number: Description: Part Number: Description: Part Number: Description:
AFB5-4
7/16 Plug for Annular Coaxial
Cable with O-ring.
AFB5-8
7/16 Plug for Annular
Coaxial Cable.
AFB3-2
7/16 Plug for Superflexible
Coaxial Cable.
Termination Instruction Y Termination Instruction Y
Part Number: Description: Part Number: Description: Part Number: Description:
AFB6-1
7/16 R/A Plug for
Superflexible Coaxial Cable.
AFB1-4
7/16 Plug for Annular
Coaxial Cable without Plaster.
AFB191-1
7/16 Plug for Annular
Coaxial Cable with O-ring
ARFA / AFY
Amphenol
Telecom Solutions
C-7
7/16 High Power RF Connector Cable Mount Plugs Continued
Termination Instruction Z Termination Instruction Z Termination Instruction BB
Part Number: Description: Part Number: Description: Part Number: Description:
AFB191-1
7/16 Plug for Standard &
Low-loss Coaxial Cable.
AFB191-4
7/16 Plug for Superflexible
Coaxial Cable.
AFB17-1
7/16 Plug for 1 Annular
Coaxial Cable, Cable inner
conductor without O-ring.
Termination Instruction BB Termination Instruction CC
Part Number: Description: Part Number: Description: Part Number: Description:
AFB17-2
7/16 Plug for 1 Annular
Coaxial Cable, Cable inner
conductor with O-ring.
AFB205-2
7/16 Plug for 1 Annular
Coaxial Cable with O-ring.
AFB119-1
7/16 Plug for 1 Radiating
Cable.
7/16 High Power RF Connector Cable Mount Jacks
Termination Instruction E Termination Instruction X Termination Instruction Y
Part Number: Description: Part Number: Description: Part Number: Description:
716-6111A-
01RFX
7/16 Jack for RG214U Coaxial
Cable.
AFB4-2
7/16 Jack for Superflexible
Coaxial Cable.
AFB2-1
7/16 Jack for Annular Coaxial
Cable.
Termination Instruction Y Termination Instruction Y Termination Instruction Z
Part Number: Description: Part Number: Description: Part Number: Description:
AFB2-6
7/16 Jack for Annular
Coaxial Cable without Plaster
AFB2-9
7/16 Jack for Annular Coaxial
Cable with weatherproof 0-ring.
AFB216-3
7/16 Jack for Standard &
Low-loss Coaxial Cable.
Termination Instruction Z Termination Instruction BB
Part Number: Description: Part Number: Description: Part Number: Description:
AFB216-4
7/16 Jack for Superflexible
Coaxial Cable.
AFB58
7/16 Jack for Radiating
Cable.
AFB16-1
7/16 Jack for 1 Annular
Coaxial Cable, Cable inner
conductor without O-ring.
ARFA / AFY
Amphenol
Telecom Solutions
7/16 High Power RF Connector Cable Mount Jacks Continued
Termination Instruction BB Termination Instruction CC
Part Number: Description: Part Number: Description: Part Number: Description:
AFB16-2
7/16 Jack for 1 Annular
Coaxial Cable, Cable inner
conductor with O-ring.
AFB220-4
7/16 Jack for 1 Annular
Coaxial Cable with O-ring.
AFB220-2
7/16 Jack for 1 Radiating
Cable.
7/16 High Power RF Connector Panel Mount Plugs & Jacks
Termination Instruction E
Part Number: Description: Part Number: Description: Part Number: Description:
AFB43-1 7/16 Plug.
716-6511A-
01RFX
7/16 Jack for RG214 Coaxial
Cable.
AFB30 7/16 Jack for RG401 Cable.
Termination Instruction R Termination Instruction X
Part Number: Description: Part Number: Description: Part Number: Description:
AFB30-2 7/16 Jack for RG402 Cable.
716-6541A-
01RFX
7/16 Jack for Superflexible
Coaxial Cable, Solderless
Centre Contact.
AFB4-5
7/16 Jack for Superflexible
Coaxial Cable.
Part Number: Description: Part Number: Description: Part Number: Description:
AFB8-3 7/16 Jack. AFB24-2 7/16 Jack. AFB40-1 7/16 Jack with Gasket.
For Alternate Versions Contact Your
Amphenol Representative
Part Number: Description: Part Number: Description:
AFB42-2 7/16 Jack with Gasket. AFB48-3 7/16 Jack with Gasket.
ARFA / AFY
Amphenol
Telecom Solutions
BNC 31 Series Bayonet Lock RF Connector System
Materials Electrical Environmental
Body/Finish Brass/Nickel
Contact
Centre MALE Brass
Centre FEMALE Phosphor Bronze
Centre Finish Gold 30
Insulator Delron/PBT
Gasket Silicone Rubber
Crimp Ferrules Annealed Copper
Durability 500 Cycles
50 ohm 75 ohm Temp. range -65C thru 165C
Shock Consult Rep
Vibration Consult Rep
Corrosion Consult Rep
Frequency range
Working Voltage 50Hz
Dielectric Withstand
VSWR Straight
Right Angle
Resistance Inner
Outer
Insulator
0-4GHz
500Vrms
1500V
1.3 max
1.5 max
3 Milliohms
2Milliohms
5000Megaohms
0-10GHz
500Vrms
1500V
1.3 max
1.5 max
3 Milliohms
2Milliohms
5000Megaohms
Related Information
Hand Tools Section F
Termination Instr. Section G
Terminology Section J
Single Crimp Straight Plug
Preinstalled Centre Contact for Solid
Conductor Cable
Termination Instruction E
50 Ohm 75 Ohm
B1111x1ND3Gxxx50 B1111x1ND3Gxxx75
Part Number: Cable: Bayonet: Part Number Cable: Bayonet:
31-5896-RFX
RG/U 58/141
Brass
31-71068-RFX
RG/U 59/62
Brass
31-5557-RFX Diecast
31-5897-RFX
Plenum 58/141
Brass
31-71070-RFX Diecast
31-5559-RFX Diecast
31-5898-RFX
RG/U 59/62
Brass
31-71069-RFX
Plenum 59/62
Brass
31-5556-RFX Diecast
31-5899-RFX
Plenum 59/62
Brass
31-71071-RFX Diecast
31-5560-RFX Diecast
Crimp Straight Plug Captive Contact
Ferrule
Type
Desc.
Termination Instruction E
50 Ohm 75 Ohm
B1121x1ND3Gxxx50 B1121x1ND3Gxxx75
Part Number: Cable: Bayonet: Part Number: Cable: Bayonet:
31-320-RFX
RG/U 58/141
Brass
31-71008-RFX
RG/U 59/62
Brass
1
31-5905-RFX Diecast
31-321-RFX
RG/U 59/62
Brass
31-71072-RFX Diecast
31-5906-RFX Diecast
36650-3RFX
RG/U 58/141
Brass
31-71073-RFX
RG/U 59/62
Brass
2
31-5908-RFX Diecast
68175-11RFX
RG/U 59/62
Brass
31-71074-RFX Diecast
31-5909-RFX Diecast Ferrule Type 1 Ferrule Type 2
Crimp Straight Plug
Ferrule
Type
Desc.
Termination Instruction type 3 - F, type 4 - E, type TPX - G
50 Ohm 75 Ohm
B1121x1ND3Gxxx50 B1121x1ND3Gxxx75
Part Number: Cable: Bayonet: Part Number: Cable: Bayonet:
31-315-RFX RG/U
174/188/316
Brass
31-71013-RFX
RG/U 179/187
Brass 3
Non-
Captive
Contact
31-5912-RFX Diecast
31-242-RFX
RG/U 179/187
Brass
31-71075-RFX Diecast
31-5913-RFX Diecast
31-71077-RFX RG/U 179/187
B1121E9NTPX3Gxxx7
5
Brass
TPX
Insulator
31-71078-RFX Diecast
31-5915-RFX RG/U
174/188/316
Brass
31-71076-RFX
RG/U 179/187
Brass
4
Pin-to-
Pin
Contact
31-5918-RFX Diecast
31-5916-RFX
RG/U 179/187
Brass
31-71121-RFX Diecast
31-5919-RFX Diecast Ferrule Type 3 Ferrule Type 4
Clamp/Solder Straight Plug
Type
Desc.
Termination Instruction type 5 - I, type 6 - H
50 Ohm 75 Ohm
B1141x1ND3Gxxx50 B1141x1ND3Gxxx75
Part Number: Cable: Bayonet: Part Number: Cable: Bayonet:
31-5966-RFX
RG/U 58/141
Brass
31-71105-RFX
RG/U 59/62
Brass
5
Captive
Contact
31-301-RFX Diecast
31-5968-RFX
Plenum 58/141
Brass
31-71107-RFX Diecast
31-5970-RFX Diecast
31-5967-RFX
RG/U 59/62
Brass
31-71106-RFX
Plenum 59/62
Brass
31-304-RFX Diecast
31-5969-RFX
Plenum 59/62
Brass
31-71108-RFX Diecast
31-5971-RFX Diecast
31-2-RFX
RG/U 58/141
Brass
31-71109-RFX
RG/U 59/62
Brass 6
Non-
Captive
Contact
31-5972-RFX Diecast
31-212-RFX
RG/U 59/62
Brass
31-71110-RFX Diecast
31-5973-RFX Diecast Type 5 Type 6
ARFA/RF
Amphenol
Telecom Solutions
C-10
BNC 31 Series Bayonet Lock RF Connector System Continued
Twist-On Straight Plug for Solid Centre Conductor
Termination Instruction K
50 Ohm 75 Ohm
B1131x1ND3Gxxx50
Part Number: Cable: Bayonet: Part Number: Cable: Bayonet:
31-5137-RFX
RG/U 58/141
Brass
Consult Representative
31-5960-RFX Diecast
31-5962-RFX
Plenum 58/141
Brass
31-5964-RFX Diecast
31-5136-RFX
RG/U 59/62
Brass
31-5961-RFX Diecast
31-5963-RFX
Plenum 59/62
Brass
31-5369-RFX Diecast
Solder Straight Plug for Semi-Rigid Cable
On Request
Termination Instruction S
50 Ohm 75 Ohm
B1181A1NT3Gxxx50
Part Number: Cable: Bayonet: Part Number: Cable: Bayonet:
31-5934-RFX .085 A:2.2 B:3.0 Brass
Consult Representative
31-5933-RFX .141 A:3.6 B:4.6
Brass
Diecast
Crimp Right Angle Plug
F
e
r
r
u
l
e
T
y
p
e
Termination Instruction E
50 Ohm 75 Ohm
B1112x1ND3Gxxx50 B1112x1ND3Gxxx75
Part Number: Cable: Bayonet: Part Number: Cable: Bayonet:
31-5911-RFX
RG/U 58/141
Brass
31-71083-RFX
RG/U 59/62
Brass
T
y
p
e
1
31-5917-RFX Diecast
31-5914-RFX
RG/U 59/62
Brass
31-71084-RFX Diecast
31-5920-RFX Diecast
31-5921-RFX
Plenum 58/141
Brass
31-71085-RFX
Plenum 59/62
Brass
T
y
p
e
2
31-5923-RFX Diecast
31-5922-RFX
Plenum 59/62
Brass
31-71086-RFX Diecast
31-5924-RFX Diecast
31-5925-RFX RG/U 174/179/
187/188/316
Brass 31-71087-RFX
RG/U 179/187
Brass
3
31-5926-RFX Diecast 31-71088-RFX Diecast
Crimp Right Angle Long Body Plug
F
e
r
r
u
l
e
T
y
p
e
Termination Instruction type 4/5 - E, type 6 - F
50 Ohm 75 Ohm
B1122x1ND3Gxxx50 B1122x1ND3Gxxx75
Part Number: Cable: Bayonet: Part Number: Cable: Bayonet:
31-335-RFX
RG/U 58/141
Brass
31-71010-RFX
RG/U 59/62
Brass
T
y
p
e
4
31-5927-RFX Diecast
31-336-RFX Brass
31-71089-RFX Diecast
31-5928-RFX Diecast
31-5929-RFX Brass
31-71090-RFX Brass
T
y
p
e
5
31-5231-RFX Diecast
31-5930-RFX Brass
31-71091-RFX Diecast
31-5932-RFX Diecast
31-5991-RFX
RG/U 179/187
Brass
31-71101-RFX
RG/U 179/187
Brass
T
y
p
e
6
31-316-RFX Diecast
31-5992-RFX Brass
31-71015-RFX Diecast
31-243-RFX Diecast
Crimp Straight Jack
F
e
r
r
u
l
e
T
y
p
e
Termination Instruction type 7/8 - E, type 9 - F
50 Ohm 75 Ohm
B6121x1Nx3Gxxx50 B6121x1Nx3Gxxx75
Part Number: Cable: Contact/Insul: Part Number Cable: Contact/Insul:
31-327-RFX RG/U
58/141
Captive/Teflon
31-71079-RFX
RG/U 59/62
Captive/Teflon
T
y
p
e
7
36800-RFX Non-Cap/Delrin
31-328-RFX
RG/U 59/62
Captive/Teflon
31-71009-RFX Non-Cap/Delrin
68150-RFX Non-Cap/Delrin
31-5901-RFX Plenum
58/141
Captive/Teflon
31-71080-RFX
Plenum
59/62
Captive/Teflon
T
y
p
e
8
31-5903-RFX Non-Cap/Delrin
31-5902-RFX Plenum
59/62
Captive/Teflon
31-71081-RFX Non-Cap/Delrin
31-5904-RFX Non-Cap/Delrin
31-317-RFX
RG/U
174/188/316
Non-Cap/Delrin 31-71014-RFX
RG/U
179/187
Non-Cap/Delrin
T
y
p
e
9
31-244-RFX
RG/U
179/187
ARFA/RF
Amphenol
Telecom Solutions
C-11
BNC 31 Series Bayonet Lock RF Connector System Continued
Crimp Straight Pin-to-Pin Jack
Termination Instruction type E
50 Ohm 75 Ohm
B6121AG1ND3Gxxx50 B6121AG1ND3Gxxx75
Part Number: Cable: Insulator: Part Number: Cable: Contact/Insul:
31-5907-RFX
RG/U
174/188/316
Delrin 31-71082-RFX
RG/U
179/187
Delrin
31-5910-RFX
RG/U
179/187
Crimp Straight Bulkhead Jack
P
a
n
e
l
F
e
r
r
u
l
e
Termination Instruction E
50 Ohm 75 Ohm
B6421xNx3Gxxx50 B6421xNx3Gxxx75
Part Number: Cable: Contact/Insul: Part Number: Cable: Contact/Insul:
31-5935-RFX RG/U
58/141
Captive/Teflon
31-71092-RFX
RG/U 59/62
Captive/Teflon
3
.
5
m
m
F
e
r
r
u
l
e
1
31-342-RFX Non-Cap/Delrin
31-5936-RFX
RG/U 59/62
Captive/Teflon
31-71011-RFX Non-Cap/Delrin
31-343-RFX Non-Cap/Delrin
31-5937-RFX RG/U
58/141
Captive/Teflon
31-71093-RFX
RG/U 59/62
Captive/Teflon
6
.
5
m
m
F
e
r
r
u
l
e
1
31-5939-RFX Non-Cap/Delrin
31-5938-RFX
RG/U 59/62
Captive/Teflon
31-71094-RFX Non-Cap/Delrin
31-5940-RFX Non-Cap/Delrin
31-5941-RFX RG/U
58/141
Captive/Teflon
31-71095-RFX
RG/U 59/62
Captive/Teflon
3
.
5
m
m
F
e
r
r
u
l
e
2
31-5943-RFX Non-Cap/Delrin
31-5942-RFX
RG/U 59/62
Captive/Teflon
31-71096-RFX Non-Cap/Delrin
31-5944-RFX Non-Cap/Delrin
31-5945-RFX RG/U
58/141
Captive/Teflon
31-71097-RFX
RG/U 59/62
Captive/Teflon
6
.
5
m
m
F
e
r
r
u
l
e
2
31-5947-RFX Non-Cap/Delrin
31-5946-RFX
RG/U 59/62
Captive/Teflon
31-71098-RFX Non-Cap/Delrin
31-5948-RFX Non-Cap/Delrin
Crimp/Crimp Straight Bulkhead Jack
P
a
n
e
l
F
e
r
r
u
l
e
Termination Instruction Ferrule 3 - F, Ferrule 4 - E
50 Ohm 75 Ohm
B6421x1ND3Gxxx50 B6421x1ND3Gxxx75
Part Number: Cable: Contact/Insul: Part Number: Cable: Contact/Insul:
31-318-RFX
RG/U
174/188/316
Non-Cap/Delrin 31-71016-RFX
RG/U
179/187
Non-Cap/Delrin
3
.
5
m
m
F
e
r
r
u
l
e
3
31-245-RFX
RG/U
179/187
31-5949-RFX
RG/U
174/188/316
Pin-to-
Pin/Delrin
Consult Representative
5
m
m
L
i
k
e
3
.
5
m
m
Crimp/Crimp Straight Bulkhead Jack Isolated from Ground
P
a
n
e
l
F
e
r
r
u
l
e
Termination Instruction E
50 Ohm 75 Ohm
B6721x1Nx3Gxxx50 B6721x1Nx3Gxxx75
Part Number: Cable: Contact/Insul: Part Number: Cable: Contact/Insul:
31-5950-RFX RG/U
58/141
Captive/Teflon
31-71099-RFX
RG/U 59/62
Captive/Teflon
6
m
m
F
e
r
r
u
l
e
5
31-5952-RFX Non-Cap/Delrin
31-5951-RFX
RG/U 59/62
Captive/Teflon
31-71100-RFX Non-Cap/Delrin
31-5953-RFX Non-Cap/Delrin
31-5954-RFX RG/U
58/141
Captive/Teflon
31-71102-RFX
RG/U 59/62
Captive/Teflon
6
m
m
F
e
r
r
u
l
e
6
31-5990-RFX Non-Cap/Delrin
31-5955-RFX
RG/U 59/62
Captive/Teflon
31-71103-RFX Non-Cap/Delrin
31-5956-RFX Non-Cap/Delrin
31-5957-RFX
RG/U
174/188/316
Non-Cap/Delrin 31-5959-RFX
RG/U
179/187
Non-Cap/Delrin
6
m
m
F
e
r
r
u
l
e
7
31-5958-RFX
RG/U
179/187
Twist-On Straight Jack for Solid Centre Conductor
Termination Instruction K
50 Ohm 75 Ohm
B6131A1ND3Gxxx50
Part Number: Cable: Bayonet: Part Number: Cable: Bayonet:
31-5139-RFX RG/U 58/141 Brass
Consult Representative
31-5965-RFX Plenum 58/141 Diecast
31-5138-RFX RG/U 59/62 Brass
31-5370-RFX Plenum 59/62 Diecast
ARFA/RF
Amphenol
Telecom Solutions
C-12
BNC 31 Series Bayonet Lock RF Connector System Continued
Clamp/Solder Straight Jack
Termination Instruction type I
50 Ohm 75 Ohm
B6141A1ND3Gxxx50 B6141A1ND3Gxxx75
Part Number: Cable: Insulator: Part Number Cable: Contact/Insul:
31-5-RFX
RG/U
58/141
Delrin
31-71111-RFX
RG/U
59/62
Delrin
31-5974-RFX
Plenum
58/141
31-15-RFX
RG/U
59/62
31-71112-RFX
Plenum
59/62
31-5975-RFX
Plenum
59/62
Solder-Terminal Types - Straight Bulkhead Jack
F
i
g
u
r
e
50 Ohm 75 Ohm
Part Number: Description: Part Number: Description:
31-203-RFX
4-Hole Flange Mount Teflon
Insulator B6551A1NT3G50
31-71104-RFX
4-Hole Flange Mount Teflon
Insulator B6551A1NT3G75 F
i
g
1
31-221-RFX
Solder-Pot L1:3.2mm
L:26.7mm B6351xxNDxx50
31-221-75RFX
Solder-Pot L1:3.2mm
L:26.7mm B6351xxNDxx75
F
i
g
2
31-5977-RFX
Solder-Pot L1:6.5mm
L:30.0mm B6351xxNDxx50
31-5977-75RFX
Solder-Pot L1:6.5mm
L:30.0mm B6351xxNDxx75
31-5978-RFX
Solder-Pot L1:9.5mm
L:33.0mm B6351xxNDxx50
31-5978-75RFX
Solder-Pot L1:9.5mm
L:33.0mm B6351xxNDxx75
31-10-RFX
Solder-Pot Isolated from
Ground
L1: 3.2mm L:30mm
B6651B1NNYL3G50
31-10-75RFX
Solder-Pot Isolated from
Ground
L1: 3.2mm L:30mm
B6651B1NNYL3G75
31-2221-RFX
Solder-Tab with Eyelet
B6351xxNDxx50
31-2221-75RFX
Solder-Tab with Eyelet
B6351xxNDxx75
F
i
g
3
PCB Mount Jacks
F
i
g
u
r
e
50 Ohm 75 Ohm
Part Number: Description: Part Number: Description:
B6251xxNx3G50 B6251xxNx3G75
31-597650-RFX
Straight Low Profile L:11.7
PCB Layout A
31-5976-75RFX
Straight Low Profile L:11.7
PCB Layout A
F
i
g
4
31-18225-RFX
Straight Low Profile L:10.8
PCB Layout C
31-18225-75RFX
Straight Low Profile L:10.8
PCB Layout C
31-5158-RFX
Straight 3 Peg
PCB Layout B
31-5158-75RFX
Straight 3 Peg
PCB Layout B
31-5493-RFX
Straight Plastic White
Bulkhead
PCB Layout D
31-71058-RFX
Straight Plastic White
Bulkhead
PCB Layout D F
i
g
5
31-5539-RFX
Straight Plastic Black
Bulkhead
PCB Layout D
31-71059-RFX
Straight Plastic Black
Bulkhead
PCB Layout D
B6252HxNPP3G50 B6252HxNPP3G75
31-543110-RFX
R/A Plastic White L:15.88mm
Bulkhead PCB Layout E
31-71047-10RFX
R/A Plastic White
L:15.88mm Bulkhead PCB
Layout E
F
i
g
6
31-553810-RFX
R/A Plastic Black L:15.88mm
Bulkhead PCB Layout E
31-71046-10RFX
R/A Plastic Black L:15.88mm
Bulkhead PCB Layout E
31-548610-RFX
R/A Plastic White L:13.1mm
Bulkhead PCB Layout E
31-71052-10RFX
R/A Plastic White L:13.1mm
Bulkhead PCB Layout E
31-554010-RFX
R/A Plastic Black L:13.1mm
Bulkhead PCB Layout E
31-71053-10RFX
R/A Plastic Black L:13.1mm
Bulkhead PCB Layout E
31-5640-RFX
R/A Commercial Metal
L:15.88mm Bulkhead
PCB Layout E
31-71043-RFX
R/A Commercial Metal
L:15.88mm Bulkhead
PCB Layout E
L
i
k
e
F
i
g
6
31-5637-RFX
R/A Commercial Metal
L:13.1mm Bulkhead
PCB Layout E
31-71042-RFX
R/A Commercial Metal
L:13.1mm Bulkhead
PCB Layout E
G11A0299
R/A Seamless Metal Fig 7
PCB Layout F
Consult Representative
PCB Layouts
ARFA/RF
Amphenol
Telecom Solutions
C-13
BNC 31 Series Bayonet Lock RF Connector System Continued
Jack-to-Jack Bulkhead Straight Adapter
8mm Panel
Jack-to-Jack Bulkhead Straight Adapter
5.5mm Panel
Jack-to-Jack Bulkhead Straight Adapter
Isolated from Ground 4.5mm Panel
B7471A1ND3Gxx B7471B1ND3Gxx B7771B1ND3Gxx
Part Number: Description: Part Number: Description: Part Number: Description:
31-220G-RFX 50 Ohm 31-220N-RFX 50 Ohm 31-5979-RFX 50 Ohm
31220G-75RFX 75 Ohm 31-220N-75RFX 75 Ohm 31-71113-RFX 75 Ohm
Jack-to-Jack Bulkhead Straight Adapter
Isolated from Ground 3.2mm Panel
Jack-to-Jack Bulkhead Straight Adapter
Isolated from Ground 5.5mm Panel Jack-to-Jack Straight Adapter
B7771B2NPBT3Gxx B7771B3ND3Gxx B7071A1ND3Gxx
Part Number: Description: Part Number: Description: Part Number: Description:
31-5980-RFX 50 Ohm 31-4803-RFX 50 Ohm 31-219-RFX 50 Ohm
31-71114-RFX 75 Ohm 31-4803-75RFX 75 Ohm 31-219-75 75 Ohm
Jack-to-Jack Straight Adapter Jack-to-Jack-to-Jack Tee Adapter Jack-to-Plug-to-Jack Tee Adapter
B7071A1ND3Gxx B8073A1ND3Gxx B9073D1ND3G50
Part Number: Description: Part Number: Description: Part Number: Description:
31-5981-RFX 50 Ohm 31-5984-RFX 50 Ohm
31-208-RFX 50 Ohm
31-71115-RFX 75 Ohm 31-71118-RFX 75 Ohm
Plug-to-Plug Straight Adapter Plug-to-Jack Right Angle Adapter Jack-to-Plug-to-Jack Tee Adapter
B2071x2ND3Gxx B5072x1ND3Gxx B9073x1ND3Gxx
Part Number: Description: Part Number: Description: Part Number: Description:
31-218-RFX 50 Ohm Brass Bayonet 31-5983-RFX 50 Ohm Brass Bayonet 31-5985-BRFX 50 Ohm Brass Bayonet
31-218-RFXD 50 Ohm Diecast Bayonet 31-9-RFX 50 Ohm Diecast Bayonet 31-5986-RFX 50 Ohm Diecast Bayonet
21-218-75RFX 75 Ohm Brass Bayonet 31-71117-RFX 75 Ohm Brass Bayonet 31-71119-RFX 75 Ohm Brass Bayonet
31-71116-RFX 75 Ohm Diecast Bayonet 31-9-75RFX 75 Ohm Diecast Bayonet 31-71120-RFX 75 Ohm Diecast Bayonet
ARFA /RF
Amphenol
Telecom Solutions
C-14
BNC 31 Series Bayonet Lock RF Connector System Continued
Plug-to-Plug Adapter
U-Link
Plug-to-Plug Adapter
U-Link
Plug-to-Jack-to-Plug Adapter
U-Link with Tap
Part Number: Description: Part Number: Description: Part Number: Description:
B2076A1002-
NT50G-50
50 Ohm
B2076A1003-NT3G-75 75 Ohm (A) 18.5mm B4070A2-ND3G-75 75 Ohm (A) 20mm
B2076A1001-NT3G-75 75 Ohm (A) 20.6mm B4070A3-ND3G-75 75 Ohm (A) 20.6mm
B2076A1004-NT3G-75 75 Ohm (A) 25mm
B4070A1-ND3G-75 75 Ohm (A) 30mm
B2076A1-NT3G-75 75 Ohm (A) 30mm
BNC Patch Panels With Jack to Jack Bulkhead Adapters
Part Number: Description:
AC-BNC20MJ75 20 way/Supplied with strip ID labels
Part Number: Description:
AC-BNC40MJ75 40 way/Supplied with strip ID labels
ARFA /RF/AAL
Amphenol
Telecom Solutions
C-15
Filtered BNC Bayonet Lock RF Connector System with Filtering
Description
Amphenols 456 Series of RF connectors provide capacitive decoupling between the connector body and the mounting panel. EMI on the coaxial
shield is shunted to the chassis ground through capacitors, while not affecting the DC and power supply frequencies. This reduces ground loop
problems and provides a mechanism to harmlessly dissipate ESD to chassis ground. The RF parameters of these connectors are the same as
their non-filtered counterparts. Filtering does not affect the signal contact, but only the shell-to-ground connection. Capacitively decoupled RF
connectors are intermateable and inter-changeable with standard non-filtered versions.
Materials Filter Performance Filter Insertion Loss
Body/Finish Zinc Diecast or
Brass/Nickel
Contact Phosphor Bronze
Centre Finish Gold 30
Insulator Thermoplastic
Durability 500 Cycles
Capacitance - 10,000 pF
Working Volt - 200 VDC (500AC Rear Mt)
DWV - 600 VDC (1000VDC for Rear Mt)
Consult representative for alternate Capacitances and
Connector Solutions
1 MHz 4 dB
5 MHz 16 dB
10 MHz 18 dB
30 MHz 25 dB
50 MHz 30 dB
1000 MHz 30 dB
PCB Rear Panel Mount Right Angle Jack
Part Number:
Description:
50 Ohm 75 Ohm
456-117 456-717 Filtered
456-117S 456-717S Filtered 10KpF/1KV Spark Gap
456-117F 456-717F Filtered 10KpF/1KV Spark Gap/1 M Resistor
456-117G 456-717G Grounded
456-117NF 456-717NF Non-Filtered. Panel Insulated (no ground spring)
Front Panel Mount Solder-Cup Jack
Part Number: Description:
456-107SG 50 Ohm Filtered
456-107TG 75 Ohm Filtered
ARFA /RF/ACC/AAL
Amphenol
Telecom Solutions
C-16
Filtered BNC Bayonet Lock RF Connector System with Filtering Continued
Vertical PCB Mount Press-Fit Jack
Part Number: Description:
456-107A 75 Ohm Filtered 3.18mm PCB (Dimension A)
456-107B 75 Ohm Filtered 5.08mm PCB (Dimension A)
Front Panel Mount Right Angle PCB Jack
Part Number: Description:
456-107 75 Ohm Filtered
Jack-to-Jack Adapter
Part Number: Description:
456-915 50 Ohm Filtered
456-917 75 Ohm Filtered
ARFA /RF/ACC/AAL
Amphenol
Telecom Solutions
C-17
N-Type High Power RF Connector
Electrical Materials Environmental
Impedance 50
Frequency range 1 MHz - 11 GHz
Voltage 1400 VRMS max sea level
Dielectric withstand 2500 VRMS max sea level
VSWR 1.1 max (3 GHz)
1.3 max (3-11 GHz)
Resistance Inner 0.8 m max
Outer 0.2 m max
Insulator 5000 M min
3
rd
Order IM Typical -125 dBm
(-168 dBc)
Body Brass (Spec: C3602)
Finish Silver or White Bronze
Contacts/Finish
Centre MALE Brass (Spec: C3602)
Centre FEMALE Cubez (Spec: Qbe2)
Bronze (Spec: QSn6.5)
Insulator PTFE
Spring Ring Heat Treated
Gasket Silicone Rubber
Crimp Ferrules Annealed Copper/Silver
Temp. range -65C thru 165C
Shock Consult Rep.
Humidity Consult Rep.
Vibration Consult Rep.
Corrosion Consult Rep.
Related Information
Cable Section D
Hand Tools Section F
Termination Instr. Section G
Terminology Section J
Mechanical
Unter Rententivity > 0.6N
Hardness > 500 Times for drawing
N-Type High Power RF Plugs
Termination Instruction C Termination Instruction E Termination Instruction H
Crimp/Crimp Straight Plug for Captive Contact Clamp/Solder Straight Plug Captive Contact
N1121A1NT3Gxxx50 N1121A1NT3Gxxx50 N1141A1NT3Gxxx50
Part Number: Description: Part Number: Description: Part Number: Description:
82-6091-RFX
Crimp/Solder Straight Plug for
Pin2Pin Contact.
For RG/U 174/188/316 Cable.
82-5380-RFX For RG/U 59/62 Cable. 34525-RFX For RG/U 59/62 Cable.
82-5375-RFX For RG/U 58/141Cable.
34025-RFX For RG/U 58/141 Cable.
82-442611RFX For RG/U 8/213 Cable.
Termination Instruction H Termination Instruction E Termination Instruction U
Dim: A: 35.5mm, B: 21mm, C: 11.1mm, D:
49.5mm
Solder Straight Plug for Semi-Rigid
N1141A1NT3Gxxx50 N1181B13GNT3Gxxx50
Part Number: Description: Part Number: Description: Part Number: Description:
82-202-RFX
Clamp/Solder Straight Plug
Captive Contact.
For RG/U 8/213/214 Cable.
82-4440-RFX
Crimp/Crimp Right Angle Plug.
For RG/U 8/213/214/225/393
Cable.
82-5956-RFX For .085 Cable. A:2.2 B:3.0
82-5955-RFX For .141 Cable. A:3.6 B:4.6
Termination Instruction E Termination Instruction E Termination Instruction E
Dim: A: 29.8mm, B: 21mm, C: 5.6mm Dim: A: 36.5mm, B: 21mm, C: 6.6mm, D: 27.2mm Dim: A: 37.7mm, B: 21mm, C: 10.6mm
Crimp/Crimp Right Angle Plug
Part Number: Description: Part Number: Description: Part Number: Description:
82-6152-RFX
Crimp/Crimp Straight Plug.
For LMR240, TWB2401 Cable.
82-6157-RFX
For LMR240, TWB2401
Cable. Nickel Body.
82-340-1052
Crimp/Crimp Straight Plug. For
LMR400, TWB4001, Belden
9913, 9914 Cable. 82-6166-RFX
For LMR240, TWB2401
Cable. Silver Body
ARFA / AFY / RF
Amphenol
Telecom Solutions
C-18
N-Type High Power RF Plugs Continued
Termination Instruction H Termination Instruction E Termination Instruction E
Dim: A: 37.7mm, B: 21mm, C: 10.6mm Dim: A: 33.5mm, B: 21.6mm, C: 15.9mm, D: 40.9mm Dim: A: 33.5mm, B: 21.6mm, C: 16mm, D: 40.9mm
Part Number: Description: Part Number: Description: Part Number: Description:
82-202-1006
Clamp/Solder Straight Plug.
For LMR400, TWB4001, Belden
9913, 9914 Cable.
82-6048-1000
Crimp/Crimp Right Angle Plug.
For LMR400, TWB4001,
Belden 9913, 9914 Cable.
82-5995-RFX
Crimp/Crimp Right Angle Plug.
For LMR600, TWB6001 Cable.
A
B
C
Termination Instruction E
Crimp/Crimp Straight Plug, Hex Coupling Nut
Part Number: Description: Part Number: Description: Part Number: Description:
82-6106-RFX For LMR240 / TWB2401 Cable. 82-6142-1000
For LMR400 / TWB4001
Cable.
82-5993-RFX For LMR600 / TWB6001 Cable.
Dim: A: 35.8mm, B: 21.6mm, C: 6.6mm Dim: A: 37.8mm, B: 21.6mm, C: 10.6mm Dim: A: 50.3mm, B: 23.6mm, C: 15.9mm
Termination Instruction DD Termination Instruction DD Termination Instruction X
Part Number: Description: Part Number: Description: Part Number: Description:
AFA7-4
N-Type Plug for Annular
Coaxial Cable without Plaster.
AFA7-5
N-Type Plug for Annular
Coaxial Cable.
AFA12-3
N-Type Plug for Superflexible
Coaxial Cable.
Termination Instruction EE
Part Number: Description: Part Number: Description: Part Number: Description:
AFA43-1
N-Type R/A Plug for Annular
Coaxial Cable.
AFA51
N-Type R/A Plug for
Superflexible Coaxial Cable.
AFA17-4
N-Type Plug for Annular
Coaxial Cable, Whorl connecting
inner conductor and cable.
ARFA / AFY / RF
Amphenol
Telecom Solutions
C-19
N-Type High Power RF Plugs Continued
Termination Instruction EE Termination Instruction Z Termination Instruction BB
Part Number: Description: Part Number: Description: Part Number: Description:
AFA6-4
N-Type Plug for Annular
Coaxial Cable, Elastomer
connecting inner conductor and
cable.
AFA6-2
N-Type Plug for Superflexible
Coaxial Cable.
AFA85-1
N-Type Plug for 1 Annular
Coaxial Cable.
Termination Instruction CC
Part Number: Description: Part Number: Description: Part Number: Description:
AFA69
N-Type Plug for 1 Radiating
Cable.
AFA65-1
N-Type Plug for 1 Annular
Coaxial Cable.
AFA62
N-Type Plug for 1
Radiating Cable.
N-Type High Power RF Jacks
Termination Instruction E Termination Instruction H Termination Instruction H
Crimp/Crimp Straight Jack Captive Contact Clamp/Solder Straight Jack Captive Contact
N6121A1NT3xxx50 N6141AxNT3Gxxx50 N6141AxNT3Gxxx50
Part Number: Description: Part Number: Description: Part Number: Description:
82-6092-RFX For RG/U 59/62 Cable. 36500-RFX For RG/U 59/62 Cable.
82-63-RFX
Clamp/Solder Straight Jack
Captive Contact.
For RG/U 8/213/214 Cable.
82-5376-RFX For RG/U 58/141 Cable. 35025-RFX For RG/U 58/141 Cable.
82-4429-RFX For RG/U 8/213 Cable.
A
B
C
Termination Instruction E Termination Instruction H Termination Instruction DD
Dim: A: 24.5mm, B: 21mm, C: 3.6mm Dim: A: 39.6mm, B: 19.1mm, C: 11.3mm
Part Number: Description: Part Number: Description: Part Number: Description:
82-6158-RFX
Crimp/Crimp Straight Jack.
For LMR240, TWB2401 Cable.
82-209-1006
Clamp/Solder Straight Jack.
For LMR400, TWB4001, Belden
9913, 9914 Cable.
AFA8-5
N-Type Jack for Annular
Coaxial Cable.
ARFA / AFY / RF
Amphenol
Telecom Solutions
C-20
N-Type High Power RF Jacks Continued
Termination Instruction DD Termination Instruction X Termination Instruction EE
Part Number: Description: Part Number: Description: Part Number: Description:
AFA12-5
N-Type Jack for Superflexible
Coaxial Cable.
AFA2-2
N-Type Jack for
Superflexible Coaxial Cable.
AFA5-1
N-Type Jack for Annular
Coaxial Cable, Whorl connecting
inner conductor and cable.
Termination Instruction EE Termination Instruction Z Termination Instruction BB
Part Number: Description: Part Number: Description: Part Number: Description:
AFA5-4
N-Type Jack for Annular
Coaxial Cable, Elastomer
connecting inner conductor and
cable.
AFA18-4
N-Type Jack for
Superflexible Coaxial Cable.
AFA80-1
N-Type Jack for 1 Annular
Coaxial Cable.
Termination Instruction CC
Part Number: Description: Part Number: Description: Part Number: Description:
AFA54
N-Type Jack for 1 Radiating
Cable.
AFA14-1
N-Type Jack for 1 Annular
Coaxial Cable.
AFA64
N-Type Jack for 1 Radiating
Cable.
N-Type RF Connector Panel Mount
Slot Width: 0.3mm, 0.5mm, 0.7mm, 0.9mm
N1551x1NT3Gxx50 N1551x1NT3Gxx50 N6551x1NT3Gxx50
Part Number: Description: Part Number: Description: Part Number: Description:
49000-RFX
Solder-Cup Straight Panel
Mount Plug.
82-6100-RFX
Slot Terminal Straight Panel
Mount Plug.
82-97-RFX
Solder-Cup Straight Panel
Mount Jack.
ARFA / AFY / RF
Amphenol
Telecom Solutions
C-21
N-Type RF Connector Panel Mount Continued
Termination Instruction C Termination Instruction E
Slot Width: 0.3mm, 0.5mm, 0.7mm, 0.9mm Crimp/Crimp Str. B/h Jack for Captive Cont.
N6551x1NT3Gxx50 N6421A1NT3xxx50 N6421A1NT3xxx50
Part Number: Description: Part Number: Description: Part Number: Description:
82-6101-RFX
Slot Terminal Straight Panel
Mount Jack.
82-6093-RFX
Crimp/Solder Str. Bulkhead Jack
for Pin2Pin.
For RG/U 174/188/316 Cable.
82-6094-RFX For RG/U 59/62 Cable.
82-5378-RFX For RG/U 58/141 Cable.
82-346-RFX For RG/U 8/213 Cable.
Termination Instruction U Termination Instruction U Termination Instruction E
Solder Straight Bulkhead Jack for Semi-Rigid Solder Straight Panel Jack for Semi-Rigid Dim: A: 36mm, B: 22mm, C: 6.6mm, D: 22mm, E: 6.5mm
N6481A23GNT3Gxxx50 N6581A13GNT3Gxxx50
Part Number: Description: Part Number: Description: Part Number: Description:
82-6096-RFX For .085 Cable. A:2.2 B:3.0. 82-6098-RFX For .085 Cable. A:2.2 B:3.0.
82-6151-RFX
Crimp/Crimp Bulkhead Jack.
For LMR240, TWB2401
Cable.
82-6097-RFX For .141 Cable. A:3.6 B:4.6. 82-6099-RFX For .141 Cable. A:3.6 B:4.6.
Termination Instruction E Termination Instruction E
Dim: A: 49mm, B: 19mm, C: 10.6mm, D: 23.2mm, E: 8.2mm Dim: A: 56.1mm, B: 23.7mm, C: 15.9mm, D: 23.5mm, E: 6.4mm
Part Number: Description: Part Number: Description:
82-6143-1000
Crimp/Crimp Bulkhead Jack.
For LMR400, TWB4001, Belden 9913, 9914 Cable.
82-5994-RFX
Crimp/Crimp Bulkhead Jack.
For LMR600, TWB6001 Cable.
Part Number: Description: Part Number: Description: Part Number: Description:
AFA42-3
N-Type Jack, Exposed TFE
Type
AFA44-2 N-Type Jack AFA46-1 N-Type Jack
ARFA / AFY / RF
Amphenol
Telecom Solutions
C-22
SMA 901 Series 50 Ohm
Materials Electrical Environmental
Body/Metal parts Brass*
Finishes Nickel or Gold
Contact Material/Finish
Centre MALE Brass/Gold
Centre FEMALE Beryllium Copper/Gold
Insulator Teflon
Crimp Ferrules Copper alloy
Gasket Silicone Rubber
Impedance 50 ohm
Frequency range
Semi Rigid cable 0-18 GHz
Flexible cable 0-12.4 GHz
Voltage up to 335 VRMS
Dielectric withstand up to 1000 VRMS
VSWR Straight 1.3
R/A 1.5
Resistance Centre 6 Milliohms max
Outer 2 Milliohms max
Insulator 5000 Megaohms min
Temp. range -65C thru 165C
Shock Consult Representative
Vibration Consult Representative
Corrosion Consult Representative
Moisture Consult Representative
Altitude Consult Representative
Durability Related Information
250 cycles Cable Section D
Hand Tools Section F
Termination Instr. Section G
Terminology Section J
Solder Bulkhead Straight Jack
Termination Instruction B
Solder Straight Plug with Contact
Termination Instruction B
Solder 4-Hole Flange Straight Jack
Termination Instruction B
SMA6481Ax3GT50Gxxx50 SMA1181Ax3GT50Gxxx50 SMA6581Ax3GT50G08550
Part Number: Description: Part Number: Description: Part Number: Description:
9019945RFX .085 S/R A: 2.2 B: 3.0 - Gold 9019867RFX .085 S/R A: 2.2 B: 3.0 - Gold 9019947RFX .085 S/R A: 2.2 B: 3.0 - Gold
9019946RFX .141 S/R A: 3.6 B: 4.6 - Gold 9019868RFX .141 S/R A: 3.6 B: 4.6 - Gold 9019948RFX .141 S/R A: 3.6 B: 4.6 - Gold
Solder Straight Jack
Termination Instruction B
Solder 2-Hole Flange Straight Jack
Termination Instruction B
Solder Right Angle Plug
Termination Instruction D
SMA6181Ax3GT50Gxxx50 SMA6581Bx3GT50Gxxx50 SMA1182Ax3GT50Gxxx50
Part Number: Description: Part Number: Description: Part Number: Description:
9019943RFX .085 S/R A: 2.2 B: 3.0 - Gold 9019949RFX .085 S/R A: 2.2 B: 3.0 - Gold 9019951RFX .085 S/R A: 2.2 B: 3.0 - Gold
9019944RFX .141 S/R A: 3.6 B: 4.6 - Gold 9019950RFX .141 S/R A: 3.6 B: 4.6 - Gold 9019952RFX .141 S/R A: 3.6 B: 4.6 - Gold
Crimp/Crimp Non-Captive Contact Str. Jack
Termination Instruction E
Crimp/Crimp Bulkhead Non-Captive Contact Str. Jack
Termination Instruction E
Crimp/Crimp Non-Captive Contact Str. Jack
Termination Instruction E
SMA6111A4xT50Gxxx50 SMA6411A4xT50Gxxx50 SMA6111A3xT50Gxxx50
Part Number: Description: Part Number: Description: Part Number: Description:
9019954RFX RG/U 174/188/316 - Nickel 9019879RFX RG/U 174/188/316 - Nickel 9019953RFX RG/U 58 - Nickel
90199541XRFX RG/U 174/188/316 - Gold 90198791XRFX RG/U 174/188/316 - Gold 90199531XRFX RG/U 58 - Gold
ARFA/RF
Amphenol
Telecom Solutions
C-23
SMA 901 Series 50 Ohm Continued
Crimp/Crimp Bulkhead Non-Captive Contact Str. Jack
Termination Instruction E
Crimp/Crimp Captive Contact Str. Plug
Termination Instruction E
Crimp/Crimp Captive Contact Str. Plug
Termination Instruction E
SMA6411A1xT50Gxxx50 SMA1111A2xT50Gxxx50 SMA1111A1xT50Gxxx50
Part Number: Description: Part Number: Description: Part Number: Description:
9019955RFX RG/U 58 - Nickel 9019877RFX RG/U 174/188/316 - Nickel 9019876RFX RG/U 58 - Nickel
90199551XRFX RG/U 58 - Gold 90198771XRFX RG/U 174/188/316 - Gold 90198761XRFX RG/U 58 - Gold
Crimp/Crimp Right Angle Plug
Termination Instruction E
Crimp/Crimp Right Angle Plug
Termination Instruction E
Straight Plug for PCB
SMA1112A5xT50Gxxx50 SMA1112A6xT50Gxxx50 SMA1251A1xT50G50
Part Number: Description: Part Number: Description: Part Number: Description:
9019881RFX RG/U 174/188/316 - Nickel 9019880RFX RG/U 58 - Nickel 9019895RFX Gold
90198811XRFX RG/U 174/188/316 - Gold 90198801XRFX RG/U 58 - Gold 9019895XRFX Nickel
Right Angle Plug for PCB Straight Jack for PCB Right Angle Jack for PCB
SMA1252A2xT50G50 SMA6251A1xT50G50 SMA6252A2xT50G50
Part Number: Description: Part Number: Description: Part Number: Description:
9019894RFX Gold 9011448RFX Gold 9011436RFX Gold
9019894XRFX Nickel 9011448XRFX Nickel 9011436XRFX Nickel
Solder-Pot Bulkhead Jack Front Mount Solder-Pot Bulkhead Jack Rear Mount Solder-Pot Bulkhead Jack Rear Mount
SMA6351B1xT50G50 SMA6451B1xT50G50 SMA6451A1xT50G50
Part Number: Description: Part Number: Description: Part Number: Description:
9019889RFX Gold 9019890RFX Gold 9019959RFX Gold
9019889XRFX Nickel 9019890XRFX Nickel 9019959XRFX Nickel
ARFA/RF
Amphenol
Telecom Solutions
C-24
SMA 901 Series 50 Ohm Continued
4-Hole Flange Panel Mount Plug 4-Hole Flange Panel Mount Jack 2-Hole Flange Panel Mount Plug
SMA1551xxxxT50G50 SMA6551xxxxT50G50 SMA1551xxxxT50G50
Part Number: Description: Part Number: Description: Part Number: Description:
9019960RFX Solder-Pot - Gold 9019892RFX Solder-Pot - Gold 9019961RFX Solder-Pot - Gold
9019960XRFX Solder-Pot - Nickel 9019892XRFX Solder-Pot - Nickel 9019961XRFX Solder-Pot - Nickel
9019962RFX Exposed TFE Type - Gold 9019887RFX Exposed TFE Type - Gold 9019963RFX Exposed TFE Type - Gold
9019962XRFX Exposed TFE Type - Nickel 9019887XRFX Exposed TFE Type - Nickel 9019963XRFX Exposed TFE Type - Nickel
9019964RFX Blunt Post - Gold 9019966RFX Blunt Post - Gold 9019965RFX Blunt Post - Gold
9019964XRFX Blunt Post - Nickel 9019966XRFX Blunt Post - Nickel 9019965XRFX Blunt Post - Nickel
9019968RFX Slot Terminal - Gold 9019970RFX Slot Terminal - Gold 9019969RFX Slot Terminal - Gold
9019968XRFX Slot Terminal - Nickel 9019970XRFX Slot Terminal - Nickel 9019969XRFX Slot Terminal - Nickel
9019972RFX Half Round Terminal - Gold 9019974RFX Half Round Terminal - Gold 9019973RFX Half Round Terminal - Gold
9019972XRFX Half Round Terminal - Nickel 9019974XRFX Half Round Terminal - Nickel 9019973XRFX Half Round Terminal - Nickel
9019976RFX Flush with Flange - Gold 9019978RFX Flush with Flange - Gold 9019977RFX Flush with Flange - Gold
9019976XRFX Flush with Flange - Nickel 9019978XRFX Flush with Flange - Nickel 9019977XRFX Flush with Flange - Nickel
9019980RFX Tab Terminal - Gold 9019982RFX Tab Terminal - Gold 9019981RFX Tab Terminal - Gold
9019980XRFX Tab Terminal - Nickel 9019982XRFX Tab Terminal - Nickel 9019981XRFX Tab Terminal - Nickel
Plug to Plug Adapter
SMA2071A1xT50G50
Part Number: Description:
9019984RFX Gold
9019984XRFX Nickel
Plug to Jack Adapter
SMA5071A1xT50G50
Part Number: Description:
9019987RFX Gold
9019987XRFX Nickel
2-Hole Flange Panel Mount Jack Jack to Jack Adapter
SMA6551xxxxT50G50 SMA7071A2xT50G50
Part Number: Description: Part Number: Description:
9019893RFX Solder-Pot - Gold 9019985RFX Gold
9019893XRFX Solder-Pot - Nickel 9019985XRFX Nickel
9019891RFX Exposed TFE Type - Gold
9019891XRFX Exposed TFE Type - Nickel
9019967RFX Blunt Post - Gold
9019967XRFX Blunt Post - Nickel
9019971RFX Slot Terminal - Gold
9019971XRFX Slot Terminal - Nickel
9019975RFX Half Round Terminal - Gold
9019975XRFX Half Round Terminal - Nickel Plug to Jack Right Angle Adapter Jack to Jack Bulkhead Adapter
9019979RFX Flush with Flange - Gold
SMA5072A2xT50G50 SMA7471B1xT50G50
9019979XRFX Flush with Flange - Nickel Part Number: Description: Part Number: Description:
9019983RFX Tab Terminal - Gold 9019988RFX Gold 9019986RFX Gold
9019983XRFX Tab Terminal - Nickel 9019988XRFX Nickel 9019986XRFX Nickel
ARFA/RF
Amphenol
Telecom Solutions
C-25
TNC 31 Series Threaded Lock RF Connector System
Materials Electrical Environmental
Body/Finish Brass/Nickel
Contacts
Centre MALE Brass/Gold Plated (Au)
Centre FEMALE Phosphor Bronze/Au
Insulator Delrin/PBT Polyester
Gasket Silicone Rubber
Crimp Ferrules* Annealed Copper
*Metal finishes Nickel (Ni) or Gold (Au)
Durability 500 Cycles
Impedance 50 ohm
Frequency range 0-11 GHz
Voltage 500 VRMS
Dielectric withstand 1500 VRMS
VSWR Straight 1.3 max
R/A 1.5 max
Resistance Inner 3 Milliohm max
Outer 2 Milliohm max
Insulator 5000 Megaohm min
Temp. range -65C thru 165C
Shock Consult Representative
Humidity Consult Representative
Vibration Consult Representative
Corrosion Consult Representative
Related Information
Cable Section D
Hand Tools Section F
Termination Instr. Section G
Terminology Section J
Crimp/Crimp Straight Plug
T1121x1ND3Gxxx50
Part Number: Cable: Ferrule: Description:
31-2367-RFX RG/U 58/141
1
Captive Contact
Termination Instruction E
31-2368-RFX RG/U 59/62
31-5837-RFX Plenum 58/141
2
31-5838-RFX Plenum 59/62
31-2315-RFX RG/U 174/188/316
3
Non-Captive Contact
Termination Instruction F
31-2242-RFX RG/U 179/187
31-5839-RFX RG/U 174/188/316
4
Pin-to-Pin Contact
Termination Instruction E
31-5840-RFX RG/U 179/187
Crimp/Crimp Right Angle Plug
T1112x1ND3Gxx50/T1122x1ND3Gxxx50
Part Number: Cable: Ferrule: Description:
31-5849-RFX RG/U 58/141
5
Short Body
Termination Instruction E
31-5850-RFX RG/U 59/62
31-5851-RFX Plenum 58/141
6
31-5852-RFX Plenum 59/62
31-5853-RFX
RG/U
174/179/187/188/3
16
7
31-2382-RFX RG/U 58/141
5
Long Body
Termination Instruction E
31-2383-RFX RG/U 59/62
31-5854-RFX Plenum 58/141
6
31-5855-RFX Plenum 59/62
31-5856-RFX RG/U 174/188/316
7
Long Body
Termination Instruction F
31-5857-RFX RG/U 179/187
Various Straight Plugs
T1131x1ND3Gxxx50/T1141x1ND3Gxxx50/T1181A1ND3Gxxx50
Part Number: Cable: Fig: Description:
31-5985-RFX S/R .085 A:2.2 B:3.0
8
Solder for Semi-Rigid
Cable
Termination Instruction S 31-4215-RFX S/R /141 A:2.2 B4.6
31-5245-RFX RG/U 58
9
Twist-On for Solid Centre
Conductor
Termination Instruction K 31-5243-RFX RG/U 59
31-5987-RFX RG/U 58/141
10
Clamp/Solder Captive
Contact
Termination Instruction I 31-5988-RFX RG/U 59/62
79875-RFX RG/U 58/141
11
Clamp/Solder
Termination Instruction H
79525-RFX RG/U 59/62
ARFA/RF
Amphenol
Telecom Solutions
C-26
TNC 31 Series Threaded Lock RF Connector System Continued
Crimp/Crimp Straight Jack
Termination Instruction Ferrule 1/2/4 - E, Ferrule 3 - F
T6121x1Nx3Gxxx50
Part Number: Cable: Ferrule: Description/Insul:
31-2374-RFX
RG/U 58/141
1
Captive Contact/Teflon
31-5841-RFX Non-Captive Cont/Delrin
31-2375-RFX
RG/U 59/62
Captive Contact/Teflon
31-5842-RFX Non-Captive Cont/Delrin
31-5843-RFX
Plenum 58/141
2
Captive Contact/Teflon
31-5845-RFX Non-Captive Cont/Delrin
31-5844-RFX
Plenum 59/62
Captive Contact/Teflon
31-5846-RFX Non-Captive Cont/Delrin
31-5847-RFX RG/U 174/188/316
3 Non-Captive Cont/Delrin
31-2317-RFX RG/U 179/187
31-5848-RFX RG/U 174/188/316 4 Pin-to-Pin Contact
Crimp/Crimp Bulkhead Jack
Termination Instruction Ferrule 5/6/7/8/10/11/12 - E, 9/13 - F
T6421x1Nx3Gxxx50/T6721x1Nx3Gxxx50/T6351BxND3Gxxx50/ T6651B1NNYL3G50
Part Number:
Panel
Size/Cable:
Ferrule: Description:
31-5858-RFX 3.5mm
RG/U 58/141
5
Captive Contact/Teflon
31-2389-RFX Non-Captive Cont/Delrin
31-5859-RFX 6.5mm
RG/U 59/62
Captive Contact/Teflon
31-2264-RFX Non-Captive Cont/Delrin
31-5860-RFX 3.5mm
RG/U 58/141
6
Captive Contact/Teflon
31-5862-RFX Non-Captive Cont/Delrin
31-5861-RFX 6.5mm
RG/U 59/62
Captive Contact/Teflon
31-5863-RFX Non-Captive Cont/Delrin
31-5864-RFX 3.5mm
Plenum 58/141
7
Captive Contact/Teflon
31-5866-RFX Non-Captive Cont/Delrin
31-5865-RFX 6.5mm
Plenum 59/62
Captive Contact/Teflon
31-5867-RFX Non-Captive Cont/Delrin
31-5868-RFX 3.5mm
Plenum 58/141
8
Captive Contact/Teflon
31-5870-RFX Non-Captive Cont/Delrin
31-5869-RFX 6.5mm
Plenum 59/62
Captive Contact/Teflon
31-5871-RFX Non-Captive Cont/Delrin
31-2318-RFX RG/U 174/188/316
9 Non-Captive Cont/Delrin
31-2245-RFX RG/U 179/187
31-5872-RFX RG/U 174/188/316 10 Pin-to-Pin Contact
31-5873-RFX
Isolated from
Ground
3.5mm
RG/U 58/141
11
Captive Contact/Teflon
31-5875-RFX Non-Captive Cont/Delrin
31-5874-RFX
Isolated from
Ground
6.5mm
RG/U 59/62
Captive Contact/Teflon
31-5876-RFX Non-Captive Cont/Delrin
31-5877-RFX
Isolated from
Ground
3.5mm
RG/U 58/141
12
Captive Contact/Teflon
31-5879-RFX Non-Captive Cont/Delrin
31-5878-RFX
Isolated from
Ground
6.5mm
RG/U 59/62
Captive Contact/Teflon
31-5880-RFX Non-Captive Cont/Delrin
31-5881-RFX
Isolated from
Ground
RG/U 174/188/316
13 Non-Captive Cont/Delrin
31-5882-RFX
Isolated from
Ground
RG/U 179/187
31-2301-RFX
3.2mm (L) Solder-
Pot
14
Delrin with Solder Tag 31-5889-RFX
6.5mm (L) Solder-
Pot
31-5890-RFX
9.5mm (L) Solder-
Pot
31-4805-RFX
3.2mm (L) Solder-
Pot
Delrin
Various Straight Jacks
T6131A1ND3Gxx50/T6551A1NT3G50/T1141A1ND3Gxx50
Part Number: Cable: Fig: Description:
31-5247-RFX RG/U 58
15
Twist-On for Solid Centre
Conductor
Termination Instruction K
31-5248-RFX RG/U 59
31-2300-RFX Solder-Pot 16 4-Hole Flange Mount
79600-RFX RG/U 58/141
17
Clamp/Solder Captive
Contact
Termination Instruction I
31-5883-RFX RG/U 59/62
ARFA/RF
Amphenol
Telecom Solutions
C-27
TNC 31 Series Threaded Lock RF Connector System Continued
PCB Mount Straight Plastic Jack PCB Mount Right Angle Plastic Jack PCB Mount Right Angle Metal Jack
T6251GxNPP3G50 T6252HxNPP3G50 T6252HANPP3G50
Part Number: Description: Part Number: Description: Part Number: Description:
31-5884-RFX White Bulkhead Housing 31-5886-10RFX White Bulkhead Housing
31-5888-RFX Bulkhead
31-5885-RFX Black Bulkhead Housing 31-5887-10RFX Black Bulkhead Housing
Jack-to-Jack Straight Bulkhead Adapter Jack-to-Jack Straight Bulkhead Adapter
Jack-to-Jack Straight Bulkhead Adapter
Isolated from Ground
T7471A1ND3G50 T7471B1ND3G50 T7771B1ND3G50
Part Number: Description: Part Number: Description: Part Number: Description:
31-5891-RFX Includes Gasket 79100-RFX Not Including Gasket 31-5892-RFX Metal Mounting Threads
Jack-to-Plug TEE Adapter Jack-to-Jack-to-Jack TEE Adapter Jack-to-Jack Straight Adapter
T9073A1ND3G50 T8073A1ND3G50 T7071A1ND3G50
Part Number: Description: Part Number: Description: Part Number: Description:
79700-RFX Delrin 31-5985-TRFX Delrin 31-4791-RFX Delrin
Jack-to-Jack Straight Adapter Plug-to-Plug Straight Adapter Plug-to-Jack Right Angle Adapter
T7071A2ND3G50 T2071A2ND3G50 T5072A1ND3G50
Part Number: Description: Part Number: Description: Part Number: Description:
31-5893-RFX Delrin 31-5894-RFX Delrin 79125-RFX Delrin
ARFA /RF
Amphenol
Telecom Solutions
C-28
Terminators and Accessories for RF Connectors
B1005A1N50 T1005A1-N* U1005A1-N*
Part Number: Description: Part Number: Description: Part Number: Description:
31-6-RFX BNC Male Cap and Chain 78750-RFX TNC Male Cap and Chain 83-1AC-RFX UHF Male Cap and Chain
F1005A1-N* N1004A1NT3G50 N1004A2NT3G50
Part Number: Description: Part Number: Description: Part Number: Description:
531-1005-
01RFX
F Male Cap and Chain 82-5722-RFX
N Terminator Plug
Teflon Insulator 49.9 ohm
1Watt 1% resistor
82-1004-03RFX
N Terminator Plug
Teflon Insulator 50 ohm
1Watt 1% resistor
N6004A1NT3G50 F1004A1NT3G75 B1004A1Nx3Gxx
Part Number: Description: Part Number: Description:
Part Number:
Description:
82-5721-10RFX
N Terminator Jack
Teflon Insulator 49.9 ohm
1Watt 1% resistor
531-1004-
01RFX
F Terminator Plug
Teflon Insulator 75 ohm
1/4Watt 1% resistor
BNC Terminator Plug
Teflon Insulator 1/2Watt 5%
resistor
Insulator/Impedance:
46650-51RFX Delrin/50 ohm
46650-51TRFX Teflon/50 ohm
46650-75RFX Delrin/75 ohm
46650-75TRFX Teflon/75 ohm
46650-93RFX Delrin/93 ohm
46650-93TRFX Teflon/93 ohm
ARFA/RF
Amphenol
Telecom Solutions
C-29
Between Series Adapters
NM716MSTS50 NF716MSTS50 NM716FSTS50
Part Number: Description: Source: Part Number: Description: Source: Part Number: Description: Source:
AFZ7-1
7/16 Plug
N-Type Plug
AFY AFZ2-1
7/16 Plug
N-Type Jack
AFY AFZ6-1
7/16 Jack
N-Type Plug
AFY
NM-716M-RFX ARFA NF-716M-RFX ARFA NM-716F-RFX ARFA
NF716FSTS50
Part Number: Description: Source: Part Number: Description: Source: Part Number: Description: Source:
AFZ1-1
7/16 Jack
N-Type Jack
AFY
AFZ31
7/16 Plug
SMA Plug
AFY AFZ32
7/16 Plug
SMA Jack
AFY
NF-716F-RFX ARFA
Part Number: Description: Source: Part Number: Description: Source: Part Number: Description: Source:
AFZ29
7/16 Jack SMA
Plug
AFY AFZ9-2
N-Type Plug
N-Type Plug
AFY AFZ23-1
N-Type Plug
N-Type Jack,
Right Angle
AFY
NFBM1NT3G50 NFBF1NT3G50
Part Number: Description: Source: Part Number: Description: Source: Part Number: Description: Source:
AFZ8-2
N-Type Jack
N-Type Jack
AFY NF-BM-1RFX
N-Type Jack
BNC Plug
ARFA NF-BF-1RFX
N-Type Jack
BNC Jack
ARFA
ARFA / AFY
Amphenol
Telecom Solutions
C-30
Between Series Adapters Continued
NFTM1NT3G50 NMFMEM1NT3G50 NMSMAM1NT3G50
Part Number: Description: Source: Part Number: Description: Source: Part Number: Description: Source:
NF-TM-1RFX
N-Type Jack
TNC Plug
ARFA 81-192-01RFX
N-Type Plug
FME Plug
ARFA
NM-SMAM-
1RFX
N-Type Plug
SMA Plug
ARFA
NMSMAF1NT3G50 NFSMAM1NT3G50 NFSMAF1NT3G50
Part Number: Description: Source: Part Number: Description: Source: Part Number: Description: Source:
NM-SMAF-
1RFX
N-Type Plug
SMA Jack
ARFA
NF-SMAM-
1RFX
N-Type Jack
SMA Plug
ARFA
AFZ15-1
N-Type Jack
SMA Jack
AFY
NF-SMAF-
1RFX
ARFA
Part Number: Description: Source: Part Number: Description: Source: Part Number: Description: Source:
AFZ37
N-Type Plug
SMB Plug
AFY AFZ38
N-Type Plug
SMB Jack
AFY AFZ39
N-Type Jack
SMB Jack
AFY
BFTMNT3G50 BMFMEMNT3G50 BMLFMEMNT3G50
Part Number: Description: Source: Part Number: Description: Source: Part Number: Description: Source:
BF-TM-RFX
BNC Jack
TNC Plug
ARFA 81-189-RFX
BNC Plug
FME Plug
ARFA 81-190-RFX
BNC Plug
FME Plug, Right
Angle
ARFA
ARFA / AFY
Amphenol
Telecom Solutions
C-31
Between Series Adapters Continued
SMAFBM1NT3G50 SMAMBF1NT3G50 TMFMEMNT3G50
Part Number: Description: Source: Part Number: Description: Source: Part Number: Description: Source:
SMAF-BM-
1RFX
BNC Plug SMA
Jack
ARFA
SMAM-BF-
1RFX
BNC Jack
SMA Plug
ARFA 81-162-RFX
TNC Plug
FME Plug
ARFA
TMLFMEMNT3G50 SMAMTM1NT3G50 SMAFTM1NT3G50
Part Number: Description: Source: Part Number: Description: Source: Part Number: Description: Source:
81-191-RFX
TNC Plug
FME Plug, Right
Angle
ARFA
SMAM-TM-
1RFX
TNC Plug
SMA Plug
ARFA
SMAF-TM-
1RFX
TNC Plug
SMA Jack
ARFA
SMAMTF1NT3G50 FMEMUMNT3G50
Part Number: Description: Source: Part Number: Description: Source: Part Number: Description: Source:
SMAM-TF-
1RFX
TNC Jack
SMA Plug
ARFA 81-193-RFX
UHF Plug
FME Plug
ARFA
SMAM-UM-
RFX
UHF Plug
SMA Plug
ARFA
SMAMUFNT3G50 SMAFUFNT3G50
Part Number: Description: Source: Part Number: Description: Source: Part Number: Description: Source:
SMAF-UM-
RFX
UHF Plug
SMA Jack
ARFA
SMAM-UF-
RFX
UHF Jack
SMA Plug
ARFA
SMAF-UF-
RFX
UHF Jack
SMA Jack
ARFA
FMEMMUMNT3G50 SMAFMUF1NT3G50 NFSMAF1NT3G50
Part Number: Description: Source: Part Number: Description: Source: Part Number: Description: Source:
81-161-RFX
Mini UHF Plug
FME Plug
ARFA
SMAF-MUF-
1RFX
Mini UHF Jack
SMA Jack
ARFA
NF-SMAF-
1RFX
FME Plug
SMB Plug
ARFA
ARFA / AFY
Amphenol
Telecom Solutions
C-32
Notes
Drawings
Coaxial Cable
- Table of Contents
AFC 50 Ohm Corrugated Cable Pages D1 D2
SFC Superflexible 50 Ohm Corrugated Cable Pages D3 D4
LLFC 50 Ohm Low Loss Corrugated Cable Pages D5 D6
Radiating Coaxial Cables 50 Ohm, For Underground Applications Pages D7 D8
50 Ohm Low Loss Coaxial Cables
- TU100 (LMR100) 50 Ohm Low Loss Coaxial Cable
- TU195 (LMR195) 50 Ohm Low Loss Coaxial Cable
- TU200 (LMR200) 50 Ohm Low Loss Coaxial Cable
- TU240 (LMR240) 50 Ohm Low Loss Coaxial Cable
- TU400 (LMR400) 50 Ohm Low Loss Coaxial Cable
- TU400-CCA (LMR400-CCA) 50 Ohm Low Loss Coaxial Cable
Pages D9 D11
50 Ohm Coaxial Cable
- RG-8/U 50 Ohm Coaxial Cable
- RG-8/U/M 50 Ohm Coaxial Cable
- RG-58C/U 50 Ohm Coaxial Cable
- RG-58/U LL 50 Ohm Low Loss Coaxial Cable
- RG-142/U 50 Ohm Coaxial Cable
- RG-174/U 50 Ohm Coaxial Cable
- RG-178/U 50 Ohm Coaxial Cable
- RG-213/U 50 Ohm Coaxial Cable
- RG-214/U 50 Ohm Coaxial Cable
- RG-223/U 50 Ohm Coaxial Cable
- RG-316/U 50 Ohm Coaxial Cable
- RG-400/U 50 Ohm Coaxial Cable
Pages D12 D17
75 Ohm Coaxial Cable
- BT2003 75 Ohm Single & Multi Coaxial Cable
- BT3002 (RF-75 0.3/1.95 DT) 75 Ohm Single & Multi Coaxial Cable
- L910 (0.5/2.3) 3.7 75 Ohm Single & Multi Coaxial Cable
- TZC 750 24 75 Ohm Single & Multi Coaxial Cable
- RG-6A/U 75 Ohm Coaxial Cable
- RG-6U/T/J 75 Ohm Coaxial Cable
- RG-11A/U 75 Ohm Coaxial Cable
- RG-12A/U 75 Ohm Coaxial Cable
- RG-59B/U 75 Ohm Coaxial Cable
- RG-59B/U/60 75 Ohm Coaxial Cable
- RG-59/U/M 75 Ohm LSOH Coaxial Cable
- RG-179/U 75 Ohm Coaxial Cable
- TU6Q-VB 75 Ohm Coaxial Cable
- TU6T60-VB 75 Ohm Coaxial Cable
- TU11Q-VB 75 Ohm Coaxial Cable
- TU11T60-VB 75 Ohm Coaxial Cable
- TU11C60TA-VBV 75 Coaxial Cable
Pages D18 D26
93 Ohm Coaxial Cable
- RG-62A/U 93 Coaxial Cable
Page D26
Spectra-Strip Coaxial Cable
- 65 Series Skewclear