Figure 6.4 Simple gear trains [Model 6.4A]. Copyright 2005 by Oxford University Press, Inc. Mechanics of Machines Cleghorn 2 Figure 6.6 Compound gear trains [Model 6.6A]. Copyright 2005 by Oxford University Press, Inc. 3 Figure 6.9 Manual transmission [Model 6.9]. Go to B/C 1 Figure 6.9 Manual transmission [Model 6.9]. Manual transmission 2 Mechanics of Machines Cleghorn 3 4 5 6 Forward 1 st gear Mechanics of Machines Cleghorn 7 8 Forward 2 nd gear Mechanics of Machines Cleghorn 9 10 Mechanics of Machines Cleghorn 11 Neutral Copyright 2005 by Oxford University Press, Inc. Mechanics of Machines Cleghorn 4 Example B (6.2) Find suitable tooth numbers for the gear train shown in the figure, to generate the speed ratios close to 1/4, 1/2.45 and 1/1.55. All gears are to have at least 12 teeth. The centre-to-centre distance between the idler and input/output shafts is 72 mm, and all gears have the same d/N ratio of 4 mm (called module).