The FXS port also needs to be registered as an analog phone:
ephone 13 device-security-mode none mac-address DA2F.E2B0.0001 type anl button 1:2 You can find the MAC address of the port by issuing the command from the CLI: show stcapp device summary Which will give you this display: Total Devices: 3 Total Calls in Progress: 0 Total Call Legs in Use: 0 Port Device Device Call Dev Directory Dev Identifier Name State State Type Number Cntl ---------- --------------- -------- ------------- ------- ----------- ---0/0/0 AN1DA2FE2B00000 IS IDLE ALG 111 CME 0/0/1 AN1DA2FE2B00001 IS IDLE ALG 112 CME 0/0/2 AN1DA2FE2B00002 IS IDLE ALG 222 CME