Design_HW12
Integrated amplifier - 2
Target
Know to adjust the resistor ratio for gain
by the derived formula.
Know the input/output range of the
amplifier.
Know the working principle of the local
feedback.
dc parameter sweeping 1
dc parameter sweeping 2
THD
If we increase input voltage to let it over the linear, the THD will increase dramatically
Question
Q1: choose r for a gain AG=0.1m A/V
Q2: Show transient Iout and the input waveform.
Q3: Show Bode plot (Gain & Phase) from AC
simulation.
Q4: Find the max input range for the linear output
range (sweep dc with differential pair input).
Q5: Compare the THD for max input with the THD
of the amplifier without local feedback from the
previous homework.
Simulation result
ac
tran
dc sweep
THD setup
THD result
IR5-IR4
Notice
Upload your homework in .doc(Not docx)
or .pdf file to FTP, and please named your
file as : HWx_student ID_Name.doc/.pdf
Due Date: 2014/12/31 12:00pm
Upload to ftp://140.117.156.208
ID: aaic
Password: aaic103