Remote Monitoring UnitsRohrback Cosasco Systems, I:
CORD-XL™
Dual-Channel Electronic Chart Recorder
Dual Analog Inputs
The CORD-XL is capable of simultaneously
monitoring and recording DC or AC voltages on
two electrically isolated input channels. input
ranges are user configurable 100 mV, 10V,
100V.
Stray Current Detection
Ideal for detecting and measuring stray currents
produced by rail transportation systems,
Real-Time Readings
The CORD-XL can monitor, display, and graph
input voltages in real time. The graph can be
captured and saved for further analysis.
Programmable Dual-Mode Chart Recording
The CORD-XL can be configured to standard
and scheduled recording. In the standard chart-
recording mode, the CORD-XL will start
recording when enabled by computer or when a
momentary switch is pressed. It will record on
one or both channels for a programmable
duration. In the schedule recording mode, it will
start and stop recording at programmable date
and time. Recording rates are configurable
from 10 readings per second to 1 reading per
hour
Large Memory Capacity
The memory of the CORD-XL can store up to
1,080,000 readings. Memory can be segmented
to store data from multiple tests.
‘Communication
Communication with the CORD-XL is achieved
using S232 serial connection. RS232
communication requires a cable to be
connected to the CORD-XL
Convenient Size and Design
The CORD-XL is small enough to fit inside
inch conduits that are often used for test
stations,
Environment Proof
The CORD-XL is completely sealed, and has
been designed to operate in hostile
environments.
CORD-KL Software (Supplied with the CORD-XL)
Key Features:
* Program the CORD-XL recording session
Prepare and save recording sessions on the
PC, then transfer to the CORD-XL_
+ Transfer data from the CORD-XL to the PC
= Graphing Functions
-Superimpose plots from two sites
-Split graphs
-Zoom in/out
-Graph Ch. 1 versus Ch. 2
-Real time graph/display of the two
channels
-lnvert the y-axis,
Distribution chart
-Data smoothing
-Select readings to view
-Show data
-Print graphs
FRohrback Casasco Systems, In. - The World Leader in Corosion Manoring Systems
‘Specifications subject to change without noiceSpecifications:
Analog Inputs
2 analog inputs
Electrically isolated (400 V)
Recording Speed
Fully programmable
Minimum 1 reading per hour
Maximum10 readings per second
Input Ranges
Channel 1 and 2
40.1, #10, #100 VDC.
Channel 2 only
40.1, #10, #100 VDC and VAG
Input Accuracy (at 25 °C)
VDC (30 readings/minute or slower): + 0.05% FS.
£3 counts
VDC (faster than 30 readings/minute up to the
‘maximum of 10 readings/second): 40.2% F.S
#3 .counts
VAC (30 readings/minute or slower only): + 2% F.S.
£3.counts
Input Resolution
0.01 mV (0.1 V range)
0.001 V (10 V range)
0.01 (100 V range)
Input Inpedence
22 Mohms (10 V & 100 V ranges)
35 Kohms (0.1 V range)
50/60 Hz AC Rejection (when measuring DC
inputs)
55 dB, typical, when recording at 30 readings/minute
or slower
20 4B, typical, when recording at faster than 30
readings/minute
Ordering Information:
CORDXL,
Rohrback Cosasco Systems, Inc.
11841 East Smith Avenue
Santa Fe Springs, CA 90870, USA
Tol: (1) 862-949-0123 Fax: (1) 862-949-3065
US Toll Free: 800-635-5898
E-Mail: sales@cosasco.com
‘Memory
Up to 1,080,000 readings
(Data retained when batteries are removed)
CORD-XL software displays percent
memory used
Power
2 X AA batteries (Alkaline recommended)
Alkaline up to 55°C
Lithium up to 70 °C
NiMh up to 85 °C (rechargeable)
Battery voltage displayed using
CORD-XL software
Operating Temperature
-20 to 55°C with Alkaline batteries
-20 to 70°C with Lithium batteries
-50 to 70°C storage
Size
4.75 in. x 12 in. cylinder
4.50m x 30.5 cm cylinder
Weight
1202. (344 g)
Real Time Clock
Setting retained when batteries are removed
Sets to match the computer using CORD-XL
software
Red/Green Status LED
Provides visual feedback of
At power on
-Normabiow battery
-Each minute while recording
-Recording ready to start
-Recording stopped
Communication activeldisconnected
‘Dual-Channel Electronic Chart Recorder, analog Input & serial cables, CORD-XL PC sofware,
carrying case, RS.232 to USB converter cable, & user manual‘ohrback Cosasco Systems, Inc.
CORI-GPS
Portable GPS Current Interrupter
‘The CORI-GPS lets you harness the power of
Global Positioning System (GPS) technology
anywhere in the world to conduct on-off
corrosion surveys with unprecedented
precision. This is the world's only fully
programmable portable current interrupter
using GPS technology for zero drift. The
CORI-GPS allows you to program
synchronized interruption cycles. With the
CORI-GPS you can, for example, program
the simultaneous interruption along a pipeline
of several rectifiers connected to CORI-GPS
units. Since each CORI-GPS obtains its
synchronization signal via_satellite,
interruption can be performed with an
accuracy of +5 milliseconds. This means that
you can perform close-interval surveys along
a pipeline without the risk of obtaining “Instant
OFF” readings which would be skewed by
badly synchronized interruption.
The CORI-GPS obtains its timing information
Via satellite signals available free of charge
world-wide. Since the satellite information
received is based on Universal Coordinated
Time it must be converted into a ‘Pipeline
Time’ common to all current interruption units
used in a particular survey,
GPS Synchronization
The CORI-GPS can synchronize multiple
Units without GPS interruption with an
accuracy of +/-5 milliseconds.
Programmable Interruption Cycles
Interruption cycles are set by the user. On
and off cycles can be set from 0 to 99
seconds in 100 ms increments.
Programmable Interruption Scheduling
The CORI-GPS can be programmed to
perform interruption according to a schedule
defined by the user. This allows the rectifier
to resume normal operation when the unit is
not interrupting.
Interruption Capacity
The CORI-GPS jis available with one
interruption capacity: 60 amps using a solid
state relay — no unit orientation or polarity
concerns.
Overload/Lightning Protection
8/20 jssec combination wave
at 4.0KV peak and 2.0 KA
peak
Synch Verification and
Resynchronization
The CORI-GPS can be used to measure the
drift in synchronization between it and a
second interrupter not using GPS.
FRonrback Casasco Systems, inc. - The Word Leader in Corosion Monitoring System
tions subject to change without noticeSpecification:
Housing Dimensions: 40.6 cm x 33.0 cm x 17.8 cm (16 in. x 13 in. x7 in.)
Weight: 8.2 kg (18 Ibs.)
Material: Corrosion-proof structural foam resin
Interruption Cycling: Fully programmable and GPS controlled with +/- 5 ms maximum drift at any
time.
Display: 25 x 316 character LCD screen
Keyboard: 16-key alphanumeric keypad
Interruption Capacit
- Maximum Current 60 amps, AC or DC
- Maximum Voltage: ‘TOV DC, 120VAC RMS (50/60 Hz)
Power Supply
= Direct Current (DC): One 12V battery
- Alternating Current (AC): 115V (North America) Standard (Contact Factory for 240 AC)
Operating Environment
Temperature: 5° to +50°C.
Ordering Information:
PIN CORI-GPS/60A
Rohrback Cosasco Systems, Inc. BSI
Web Site: www. cosasco.com
Bulletin # 852-G