Internal only
Title
Phenomenon
Description:
Alarm
Information
None
Cause
Analysis
None
Handling
Process
1Perform upload test. The upload throughput can only reach around 2.5Mbps.
2Check the UE capability. By using the UE trace, read the RRC_Connect_Setup_CMP
message and confirm it is E-DCH CAT6 UE
3Check the SIM HLR by reading RAB_Assignment_Req message (Pic 2)and confirm
it is activated with 5.76Mbps bit rate
4Open the RB_Setup Message. It is found that RNC only assigned E-DPDCH SF2x2.
It is the cause of failure to achieve 5.76M
5Check the license and confirm HSUPA 5.76, EDCH 2ms TTI is configurated. Besies,
CE is sufficient.
6 Check the RNCs CORRMALGOSWITCH parameters, HSUPA 2ms TTI switch is
activated.
7 However, there is an additional requirement for HSUPA5.76 is SRB over E-DCH
2015-5-14
1 , 2
:
Internal only
Attachments
Related
document
link
2015-5-14
2 , 2