TM
Galvanized C
urved Interlo
s
Ca
in
g
D
t
ep
h
ll er
ra tt
ve u
O r Sh th
lle id
Ro W
)
(D
g
sin
Ca t (H)
h
ig
He
Motor Area 1
cking Slats
einforced Side
MS Angle R
Mo
t
Are or
a2
Ro
ller
Op Shut
en te
He ing r
igh
t
Guide
O
Ro vera
ller ll
S
He hutt
igh er
t
MS Angles R
einforced Bo
ttom Bar
Malaysia Standard
MS 1073 Part 3 1996
EQUIVALENT
BS
BRITISH STANDARD
British Standard
BS 476 Part 22 1987
COMPLIED
BOMBA
APPROVED
SIRIM
TESTED
PROUDLY
MALAYSIAN
BRANZ
ADVISED
by Star Rolling TM
Opening
Width
Free of Obstruction
It is imperative for the mounting points and
surroundings to be free of obstruction, such as
piping, wiring, ducting, and other possible
building construction.
Oversized Roller Shutter Delivery
Oversized roller shutters are recommended to
be scheduled for delivery to construction site
prior to erection of space restricting interior
partition and wall.
Opening
Height
Opening
Height
Clearance for
Headroom (A)
Clearance for
Side Guide (B)
Up to 3000
480 above
250 above
Up to 6000
520 above
250 above
Roller shutter
Opening Width
All copyrights in this printing material are reserved
by Star Rolling TM
Exceeded
Test Duration: 0hr01min
Test Duration: 1hr20min
240 minutes
BS 476 Part 22 1987
Manufacturing License by
BOMBA (Putrajaya)
After Test
by Star RollingTM
51 mm
90 mm
90mm
Roller Shutter Slats
90 mm
51 mm
90 mm
Motor Operator
Depending on the roller shutter specification, Star
Rolling will recommend a suitable capacity of roller
shutter motor (220v: 60Hz: 1Phase or 415v: 60Hz:
3Phase, Insulation Class E). All motor operators
recommended shall have:
- Manual override chain
- Auto-heat-cutoff thermo system
- Button switch encased in protected key box
- Mechanical gravity closing device
- Closure or opening trigger relay
To provide DC24V Relay connected to the
building fire-fighting system to trigger the
closure or opening of the shutter in the event of
fire. (The connection and commisioning of the
system shall be done by the fire-fighting
specialist).
- The applicable power supply must be provided
and located near the roller shutter motor
postion.
Optional Accessories
- Heat-sensitive Mechanical Closure Device
Heat-sensitive mechanical device to trigger the
closure of the shutter when the surrounding
temperature reaches between 60c-70c. This
device is reusable.
Copyright Note:
All logos (BOMBA, SIRIM, MS (Malaysian Standard) and
BRANZ (Building Research Association of New Zealand)
are the intellectual properties of the respective
organizations.
TM STAR ROLLING SHUTTER SDN. BHD.