Copyright 2012 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.
PART A: Pressure Tank
Problem Definition & Inputs : A pressure tank of dimensions: 200 x 100 x 150 mm is subjected to an internal pressure of 2.5 MPa upto a height of 125 mm from the bottom. The tank is 2mm thick and is resting on the ground. The Modulus of Elasticity and Possions Ratio are: 2.1E5 N/mm^2 and 0.3 respectively. Geometry File Name: PartA_Problem1_Tank.hm (included in PartA.zip) Solution Expected from Student : Concept Design: Use HyperWorks Student Edition to optimize the design of the pressure tank to Minimize the Displacement at the center of each face of the tank by creating reinforcement beads using Topography Optimization. Provide two other design options with different bead patterns and compare their design performance.