Anda di halaman 1dari 6
Since the Ay term is a function only of the r/z ratio we may tabulate several values as follows: riz 0.000 0.100 6.200 0.300 0.400 0500 0.750 1.000 1.500 2.000 As 0477 0.466 0.433 0.385 0.329 0.273 0.156 0.084 0.025 _ 0.008 values of 7/z may be obtained as follows: wh, =90 0.100 0200 0300 0.400 0500 0600 0700 0800 0500 100 Zrk=00 0270 0400 0518 0637 0.766 0918 1.110 1387 1908 = as done for the Boussinesq equation. For j4 = 0.30 we obtain the following values: rz 0.000 0.100 0.200 0.300 0.400 0.500 0.750 1.000 1.500 2.000 Ay 0.557 0529 0458 0.369 0.286 0.217 0.109 0.058 0.021 0.010 ‘TABLE 5. Stress influence values 1,, from Eq. (5-8) to use in Eq. (5-82) to compute stresses at depth ratios M = Bz; N = L/z beneath the corner of a base BX L. ‘M and N ace interchangeable. NE .100 «200.300.400.500 600.700.800.900 1.000 1.005 .009-.013.-.017 «020.022.024.026 «027 =. 028 12 1009 1018 /026 «1033 039 1043 1047 1050 10531055, 13° 1013 1026 ©1037 1047 1056 1063 1069 1073 1077 :079, 14 1017 1033. 1047 1060 1071 1080 1087 1093 1098 =: 402, 15 1020 1039 1056 «1071 084 «1095 1103 1120 1116 = .120, +6 022.043.063.080 095.107.117.125 31.136, i7 1024 1047 1069 [087 1103 1417 11281137 1144 S349. [8 1026 «1050 [073 1093 1110 1125 1137 1146 1154 160 "9 1027 1053 077 1098 «1116 1131 1144 1154 1162 ‘168 2:0 028 1079 101.120 1136 «149 «160-168 ©1175 2.1 029.056.082.104 424.140 154 1650-37482 1:2 1029-1057 1083 106 1126 «1143-1157 168 11781185, 113° 1030 1058 «1085 108 «1128 «1146 «1160 1171 1181 = .189 1:4 1030 1059 1086 «109 1130 1147 liga 1174 «1184 L192 2:5 1030-059 -086 «110-131-149 1164 1176 «1186 = .194 2.0 031.061.089.113 .135 153.169.181.192 200 2:5 1031. «10621089114 1136 © «1155 1170 1183 1194 © 202 3:0 1031. 1062 1090 1115 11371155 1171 184 1195 = 203, 5!0 1032, 1062 10901115 1137 1156 1172 1185 1196 = 204 10:0 1032, 1062 '090 1115 1137 1156 1172 1185 1196 ©1208 WN 1.100 1.200 1.300 1.400 1.500 2.000 2.500 3.000 5.000 10.000 2.029 029.030.030.030 -032.-«.032«.031 «032.032 2 1056 1058 i059 1061 1062 1062 3 loz 108s 086 1089 :089 1090 4 l104 ‘108 la10 113 laa [1s (5 laze i128 11321135 1436 1137 +6 6140 243.146 +149 6153.55 +156 7 1u5@ 1457 [160 162 1164 ‘169 1170 1172 18 1165 1468 i712 1474 1176) fie1 183 1185 19 1374 lave ex 118d 1186 192 ‘194 1196 aio 1a81 Tags 11s9 1191 lisa 1200 :202 1205 1a .186 195.198.200.207 .209 212 alz20 lisa 200 1203 1208 1212 1215 1218 113 figs 1204 1207 1209 217 1220 1223 1a liga 1207 1210 1213 12a1 1224 1227 1:5 200 1209 1213 1216 12241227 1230 2.0 .207 -217.221 224.232 236 +240 2:5 1209 +220 1224 «1227 1236 240 1244 3100 24a 1221 1225 1228 1238 242 1247 5:0 1212 1222 1226 1230 240 244 1249 10.0 1212 12231227 1230 1240 244 1250 TABLE 52 Values of /, and I; to compute the Steinbrenner influence factor J, for use in Eq. (5-16a) for several N = H/B' and M = L/B ratios N lo120 130 «14 1S TB 20 0.2 1, = 0009 0.008 0.008 0.008 0.008 0,008 0.007 0.007 0.007 0.007 0.007 Jz = 0.041 0.042 0.042 0.042 0.042 0.042 0.043 0.043 0.043 0.043 0.043, 04 0033 0.032 0.031 0.030 0.029 0.028 0.028 0027 0.027 0.027 0.027 0.066 0.068 0.069 0.070 0.070 0.071 0.071 0.072 0072 0.073 0.073 0.6 0.066 0.064 0.063 0.061 0.050 0.059 0.058 0.057 0.056 0.056 0.055 0.079 0.081 0.083 0.085 0.087 0.088 0.089 0.090 0.091 0.091 0.092 08 0.104 0.102 0.100 0.098 0.096 0.095 0.093 0.092 0.091 0.030 0.089 0.083 0.087 0.090 0.093 0.095 0.097 0.098 0.100 0.101 0.102 0.103 LO 0.142 0.140 0.138 0.136 0.134 0.132 0.130 0.129 0.127 0.126 0.125 0.083 0.088 0.091 0.095 0.098 0.100 0.102 0.104 0.106 0.108 0.109 15 0224 0.220 0219 0217 0216 0.214 0213 0.075 0.096 0.099 0.102 0.105 0.108 0.110 20 0285 0.292 0.292 0.292 0.291 0.290 0.289 0.064 0.086 0.090 0.094 0.097 0.100 0.102 30 0363 0.393 0396 0.398 0.400 0.401 0.402 0.088 0.068 0.071 0075 0.078 0.081 0.084 40 0408 0.421 0.431 0.440 0.448 0.455 0.460 0.465 0.469 0.473 0.476 0.037 0.041 0.044 0.048 0.051 0.054 0.057 0,060 0.063 0.066 0.069 50 0437 0.452 0.465 0.477 0.487 0.496 0.503 0510 0516 0522 0526 0.031 0.034 0.036 0.039 0.082 0.045 0.048 0050 0.053 0.055 0.058 60 0457 0474 0.489 0.502 0.514 0.524 0534 0.542 0550 0.557 0.563 0.026 0.028 0.031 0.033 0.036 0.038 0.040 0.043 0.045 0.087 0.050 10 OATL 0.490 0.506 0.520 0.533 0.545 0.556 0566 0.575 0.583 0.590 0.022 0.024 0.027 0.029 0.031 0.033 0.035 0.037 0.039 0.041 0.013 80 0.482 0.502 0.519 0534 0.549 0.561 0.573 0.584 0594 0.602 0.611 0.020 0.022 0.023 0.025 0.027 0.029 0.031 0.033 0.035 0.036 0.038 90 0.491 OSI1 0529 0.545 0.560 0.574 0.587 0.598 0.609 0618 0.627 0.017 0.019 0.021 0.023 0.024 0.026 0.028 0.029 0.031 0.033 0.034 100 0.498 0519 0537 0554 0.570 0.584 0597 0610 0.621 0.631 0.641 0.016 0.017 0.019 0.020 0.022 0.023 0.025 0.027 0.028 0.030 0.031 200 0529 0553 0575 0.595 0.614 0.631 0.647 0.662 0.677 0.690 0.702 0.008 0.009 0.010 0.010 0.011 0.012 0.013 0.013 0.014 0.015 0.016 500.0 0.560 0.587 0.612 0.635 0.656 0.677 0.696 0.714 0.731 0.763, 0.001 0.001 0.001 TABLE 5-2 Values of I, and Z2 to compute the Steinbrenner influence factor J, for use in Eq. (5-16a) for several N = H/B' and M = L/B ratios (continued) N M=25 40 80 60 70 80 90 10.0 25.0 50.0 1000 0.2 1, = 0.007 0.006 0.006 0.006 0.006 0.006 0.006 0.006 0.006 0.006 0.006 fy = 0.043 0.044 0.044 0.044 0.044 0.044 0.044 0.044 0.044 0.044 0.054 04 0.026 0.024 0.024 0.024 0.024 0.024 0.024 0.024 0.024 0.024 0.024 0.074 0.075 0.075 0.075 0.076 0.076 0.076 0.076 0.076 0.076 0.076 06 0.053 0.051 0.050 0.050 0.050 0.049 0.049 0.049 0.049 0.049 0.049 0.094 0.097 0.097 0.098 0.098 0.098 0.098 0.098 0.098 0.098 0.098 08 0.086 0.082 0.081 0.080 0.080 0.080 0.079 0.079 0.079 0.079 0.079 0.107 OAL 0.112 0.413 0.113 0.113 0.113 O.114 0.114 0.114 0.114 10 121 O.115 0.113 0.412 0.112 0.112 O.111 O.111 0.110 0.110 0.110 O.114 0.120 0.122 0.123 0.123 0.124 0.124 0.124 0.125 0.125 0.125 1s 20 3.0 40 50 60 70 80 9.0 10.0 20.0 500.0 0.207 0.118, 0.284 0.14 0.402 0.097 0.484 0.082 0.553 0.070 0.585, 0.060 0.618 0.053, 0.643, 0.047 0.663, 0.042 0679 0.038 0.756 0.020 0.832 0.001 0.197 0.130 0271 0.131 0.392 0.122 0.484 0.110 05s4 0.098 0.609 0.087 0.653, 0.078 0.688 0071 0.716 0.064 0.740 0.059 0.856 0.031 097 0.001 0.194 0.134 0.267 0.136 0.386 0.131 0.479 0.121 0.552 ot 0.610 0.101 0.658 0.092 0.697 0.084 0.730 0.077 0.758 0.071 0.896 0.039 1.046 0.002 0.192 0.136 0.264 0139 0.382 0.137 0.474 0.129 0.548 0.120 0.608 oud 0.658 0.103 0.700 0.095 0.736 0.088 0.766 0.082 0.925 0.046 1.102 0.002 0.191 0.137 0.262 o14i 0378 oat 0.470 0.135 0.543, 0.128 0.604 0.120 0.656 12 0.700 o.104 0.737 0.097 0.70 0.091 094s 0.053 1.150 0.002 0.190 0.138 0.261 0.143 0.376 0.144 0.466 0.139 0.540 0.133, 0.601 0.126 0.653, O19) 0.698, o.ni2 0.736 0.105 0.770 0.959 0.059 1.191 0.003, 0.190 0.138 0.260 0.144 0.374 0.145 0.464 0.142 0.536 0.137 0.598 0.131 0.650 0.125 0.695 O18, 0.735 onn2 0.770 0.106 0.969 0.065 1.227 0.003 0.189 0.139 0.259 0.145 0.373 0.147 0.462 0.145 0534 0.140 0.595 0.135 0.647 0.129 0.692 0.124 0.732 O18, 0.768 0.112 0977 0.071 1.259 0.003 0.188 0.140 0.257 0.147 0.368 0.152 0.453, 0.154 0.522 O.1s4 0579 0.153 0.628 0.152 0672 O51 0710 0.149 0.745 0.147 0.982 0.124 1.532 0.008 0.188, 0.140 0.256 0.147 0.367 0.153 0.451 0.155 osi9 0.156 0.576 0.157 0.624 0.157 0.666 0.156 0.704 0.156 0.738 0.156 0.965 0.148 1.721 0.016 0.188 0.140 0.256 0.148. 0.367 0.184 04st 0.156 0519 0.187 0.575 0.1s7 0.623 0.158 0.665 0.158 0.702 0.158 0.735 0.158 0.987 0.156 1.879 0.031 TABLE 5-5 Influence factors /, to compute rotation of a footing LB Flexible Rigidt ou Loss 159 02 1.60 242 050 251 354 075 291 304 1.00 (circle) 3.15 (3.00) 4175.53)" Porrivic 1.50 343 aaa 5 2.00 337 459 fo = 16 + 0228/0) 3.00 370 474 5.00 377 437 10.00 381 498 100.00 3.82 5.06 = 16/m ‘For cicle B = diameter. ‘There are several “rigid” values; these are from equations given by Taylor (1967, Fig. 9, p. 227). They -ompare reasonably well with hase given by Poulos and Davis (1974, p. 169, Table 73) Figure 5-7 Influence factor J; for footing at a depth D. Use actual footing width and depth dimension for this DfB ratio, Use program FFACTOR for values fo avoid intespolati Depth factor, Fs Lo os! NS <3 : |» Ss}

Anda mungkin juga menyukai