1 de 1
Parts List:
R1 = 10K
R2 = Thermistor
R3-R7 = 5K
R8-R11 = 220 ohm
http://www.sentex.ca/~mec1995/circ/TempInd.html
IC1
Led1,2,3,4
BZ1
B1
=
=
=
=
CA3240E
Led's of your choice
Buzzer, 6V
battery, 9V
This circuit sets off a buzzer after the last Led (led4) is lit. It is a
simple but fun circuit to experiment with. You can replace the buzzer with
something else, add a trimpot to adjust sensitivity, etc, etc. The possibilities
are endles.
The CD3240E IC may in some cases be difficult to obtain.
Try the following resources below:
Digikey order #CA3240EZ-ND $2.04
Newark order #CA3240E $2.80
Have fun building or bread-boarding this circuit and don't hesitate to
experiment on it!
27/01/2016 19:00