0 penilaian0% menganggap dokumen ini bermanfaat (0 suara)
12 tayangan80 halaman
After the UE transits to the CELL_DCH state in connected mode during a call, the RNC instructs the UE to take measurements and report the measurement event results. The neighboring cell combination result is contained in the MEASUREME NT CONTROL message and sent to the UE.
After the UE transits to the CELL_DCH state in connected mode during a call, the RNC instructs the UE to take measurements and report the measurement event results. The neighboring cell combination result is contained in the MEASUREME NT CONTROL message and sent to the UE.
After the UE transits to the CELL_DCH state in connected mode during a call, the RNC instructs the UE to take measurements and report the measurement event results. The neighboring cell combination result is contained in the MEASUREME NT CONTROL message and sent to the UE.
After the UE transits to the CELL_DCH state in connected mode during a call,
the RNC sends a MEASUREMENT CONTROL message to instruct the UE to take
measurements and report the measurement event results. Upon the reception of an event report from the UE, the RNC makes a handover decision and performs the corresponding handover.
Case: Measurement Report &
Trigger
Case: Measurement Report &
Trigger Contd.
IntraRelThdFo r1A
IntraRelThdFo r1B
The neighboring cell combination result is contained in the MEASUREME NT CONTROL message and sent to the UE