SYNOPSIS ON THE
Arpit Thakur
SUBMITTED BY:
Md. hussain
Balbir
Pankush
Korubali Harish
INDEX
1 DYNAMO
Dynamo is an electric device that runs on direct mechanical input. Dynamo were
used by running machinery, often eliminating the need for a local steam engine or
internal combustion engine. Dynamo can use directly to recharge batteries,
providing the motive rotation .
3 SQUARE TUBE
Hollow square tube, which have a uniform cross-section with only one enclosed
void along their whole length in the shape of rectangles (including squares), and
which have a uniform wall thickness.
4 HACK SAW
A hacksaw is a fine-tooth hand
saw
with
a blade held
under tension in a frame, used
for cutting materials
such
as metal or plastics.
Hand-held
hacksaws consist of a metal arch
with a handle, usually a pistol
grip, with pins for attaching a
narrow disposable blade. A screw
or other mechanism is used to put
the thin blade under tension. The
blade can be mounted with the
teeth facing toward or away from
the handle, resulting in cutting
action on either the push or pull
stroke. On the push stroke, the arch will flex slightly, decreasing the tension on the
blade, often resulting in an increased tendency of the blade to buckle and crack.
Control of the cut and longer blade life.
5 NUT BOLT
In normal use, a nut-and-bolt joint holds together
because the bolt is under a constant tensile
stress called the preload. The preload pulls the nut
threads against the bolt threads, and the nut face
against the bearing surface, with a constant force,
so that the nut cannot rotate without overcoming
the friction between these surfaces. If the joint is
subjected tovibration, however, the preload
increases and decreases with each cycle of
movement. If the minimum preload during the vibration cycle is not enough to
hold the nut firmly in contact with the bolt and the bearing surface, then the nut is
likely to become loose.
6 SWITCHES
DPDT (double pole, double throw): A DPDT
switch routes two separate circuits, connecting
each of two inputs to one of two outputs. A DPDT
switch has six terminals: two for the inputs, two
for the A out puts, and two for the B outputs.
7 PLYWOOD
Plywood layers (called veneers) are glued together,
with adjacent plies having their wood grain at right
angles to each other, to form acomposite material.
This alternation of the grain is called crossgraining and has several important benefits: it
reduces the tendency of wood to split when nailed at
the edges; it reduces expansion and shrinkage,
providing improved dimensional stability; and it
makes the strength of the panel consistent across
both directions. There is usually an odd number of plies, so that the sheet is
balancedthis reduces warping. Because plywood is bonded with grains running
against one another and with an odd number of composite parts, it is very hard to
bend it perpendicular to the grain direction.
METHODOLOGY / PLANNING OF
WORK
PEDAL ROTATION BY
THE HUMAN EFFORT
12 V CHARGED BATTERY
WIL USE IN THE
LIGHTING THE LED
BULBS AND TO CHARGE
THE MOBILE
APPLICATION
METAL CUTTING IS DONE IN SMALL SCALES
WE CAN USE IT AT CONSTRUCTION SITES
AND FURNITURE UNITS
TO CUT METAL FOR WINDOW PANES
CAN ALSO BE USED IN COLLEGE
WORKSHOPS AND AUTO GARAGES TO SAVE
ELECTRICITY
IT CAN USE TO WASH THE CLOTH
THIS WHOLE ARRANGEMENT WILL BE USED
AS A EXECISE EQUIPMENT
TO CHARGE THE MOBILE AND TO LIGHT THE
12V LED BULB