Anda di halaman 1dari 147

INTERNATIONAL

APPLICATION

CATALOGUE
NUMBER

30
SEPTEMBER 2015

OME FEATURES
NITROCHARGER SPORT SHOCK ABSORBERS
LARGE BORE 35MM TWIN TUBE DESIGN - Allows greater
oil volume for cooling and sustained valving performance
and strong 1.6mm outer tube construction protects the
vital internal components from damage.
LARGE 18MM HARDENED CHROME PISTON ROD Strong enough to handle any load or harsh conditions
expected from your 4x4.
TRIPLE LIP CHECK VALVE OIL SEAL MK2 -The latest
technology in oil seal design physically larger with
quantum improvements in durability, oil and gas retention
with much greater resistance to heat so it keeps working
under the harshest conditions.
TEFLON IMPREGNATED LOW FRICTION ROD GUIDE The latest refinement in rod guide design further reduces
heat build up and maintains performance.
TEFLON INFUSED BRONZE ROD GUIDE SLIP RING - A
new component that maintains consistent and uniform
performance by providing a tight and uniform fit between
the piston rod and rod guide.
MULTI DEFLECTIVE DISC VALVING SYSTEM - A unique
and new valving system that features multiple disc valving
control at the base of the shock and on both sides of the
piston rod. This allows the OME engineers more valving
options for better ride quality and handling control.
35MM HIGH FLOW TEFLON BANDED PISTON - New
low friction design has less restrictive oil flow through the
piston, reduces heat build up and aeration of the oil that
leads to fade.
VEHICLE SPECIFIC VALVING - OME shock absorbers
performance stand head and shoulders over its
competitors because many hours of OME engineering
valving work have been put into each and every shock
absorber to ensure our customers get the best ride and
handling their vehicle can have.
POLYETHYLENE DIRT SHIELD Impact resistant,
polyethylene dirt shield provides additional protection from
stone chips and off road debris.
NITROGEN GAS Increases the temperature operating
range and improves oil flow through the valving, ensuring
optimum performance.
SUPPLEMENTARY WELDS - For strength and reliability,
all mounts have supplementary welds.
NITROCHARGER SHOCK ABSORBERS
GIANT 18MM CHROMED SHAFT - Indestructible for
Australias rugged off roading. Induction hardened then
hard chromed to a superfine finish.
NITROGEN GAS - The gas pressure keeps the oil cohesive
under all situations.
TWIN TUBE DESIGN - 33% thicker outer tube insures that
rocks do not damage internal operating components. This
design also allows for a greater volume of oil which keeps
shock cooler.
35MM SEVEN STAGE COMPRESSION VALVE - Delivers
all the subtleties of compression rates for the best ride and
handling.
CHECK VALVE SEAL - The latest in seal technology,
this shaft seal significantly improves gas retention whilst
offering excellent longevity.
GLACIER BUSH - A Teflon coated rod guide bush significantly reduces heat build up in the rod guide area,
developed from the Emus off road racing programme.
GIANT 35MM TEFLON BANDED PISTON - A new four
stage coil sprung rebound valve system to control
vehicle bounce.

SUPPLEMENTARY WELDS - On all mounting eyes & pins


for maximum shock absorber mount strength.
STONEGUARD - Protects oil seal and piston rod against
stone and dirt damage.
COIL SPRINGS
X5K MICRO-ALLOYED SPRING STEEL New generation
high strength spring steel grade designed to withstand
higher operating stresses with superior resistance to sag
and improved toughness and corrosion fatigue properties.
SHOT PEENED To reduce stress, which greatly
enhances spring life.
DOUBLE SCRAGGED To eliminate spring sag.
VARIABLE AND CONSTANT RATE - Designs used to
obtain optimum ride comfort and load carrying capabilities.
STEERING STABILISERS
COIL SPRUNG 9 STAGE VALVING - For optimum
performance.
35MM PISTON & BORE - Greater oil volume giving better
damper performance.
TWIN TUBE DESIGN - Protects the internal components
against stone damage.
STEEL STONEGUARD - Protects the piston rod against
stone damage.
FOAM CELL - Keeps the oil at the valving to prevent fade.
ORIGINAL MOUNTS - All mounts are of similar design to
original stabilisers for ease of fitment.
LEAF SPRINGS
FLAT AXLE SEAT AREA - Lowers spring stress whilst
retaining spring free camber height. Unique to most
OME springs.
ANTI FRICTION INTER LEAF LINERS - Used where
applicable to reduce friction between spring leaves giving
better ride comfort and increased spring life.
SHOT PEENED - On the tension side of all leaves to
double spring life.
DRAW TAPERED & DIAMOND CUT LEAVES - For
reduced interleaf friction and improved load distribution
in the load bearing area.
GRAPHITE COATED - For further reduced friction.
MILITARY WRAPPED - For extra safety (where fitment
permits).
LOOSE CLAMPED - For smooth & quiet operation.
URETHANE BUSHES - LEAF SPRING
PREMIUM GRADE - Not all bushes are the same - OME
bushes are precision moulded in captive moulds to
ensure exact tolerances for long bush life.
SPLINES - Ensures the best fit by taking up irregularities
in spring eyes.
UNIQUE OME DESIGN - Clever lip seal and shoulder
design prevents dirt penetrating between bush shoulder
and shackle face.
GREASABLE SHACKLES
REDUCED WEAR - Greasable shackles reduce shackle
pin deterioration, increase bush life, enables easy
maintenance and improve ride and handling.
ANTI INVERSION FACILITY - Built in feature on all
LandCruiser greasable shackles.
SERVICING - Simple & effective.

PAGE 2

WARRANTY: For a copy of ARBs Warranty Policy, ARB Products: Warranty Against Defects, please visit the ARB website www.arb.com.au

13210_OMECat_AustraliaCover_28_PRINT.indd 2

CONTENTS
PAGE

GUIDE TO SELECTION ...


4

NITROCHARGER SPORT SELECTION .....


5

NITROCHARGERS & STEERING STABILISER APPLICATIONS ....


9

COMPACT AWD - OME SPRING & SHOCK ABSORBER RANGE ...


13

LTR REMOTE CANISTER SELECTION.......


14
ARMOURED APPLICATION...
15

SUSPENSION APPLICATIONS
CHRYSLER JEEP ...
16
FORD ....
25
HOLDEN / ISUZU / GM ..
31
HUMMER .....
37
HYUNDAI .....
38
KIA ...
38
LADA ..
38
LAND ROVER .......
39
MAZDA ......
46
MERCEDES ......
48
MITSUBISHI ......
49
NISSAN .....
56
SSANGYONG .......
72
SUZUKI ......
72
TOYOTA .....
77
VOLKSWAGEN .....
104

TECHNICAL SPECIFICATIONS
SUSPENSION BUSH KIT SELECTION .......
105
DIAGRAM REFERENCE FOR SUSPENSION BUSH KITS .....
110
NUMERICAL SPRING & SHOCK / STRUT BUSH APPLICATIONS ...
112
OLD MAN EMU POLYURETHANE SPRING BUSH DIMENSIONS ....
115
SUSPENSION FITTING KITS ...
116
ADDING OR REMOVING AN EXTRA LEAF ...
123
REPLACEMENT MAIN OR SECOND LEAF ..
124
REPLACEMENT CENTRE BOLTS ....
125
LEAF SPRING SERVICE PARTS ....
125
U BOLTS ......
126
LEAF SPRING TRIM PACKERS ..
127
CLIP LINER KITS FOR LEAF SPRINGS ..
127
INTER-LEAF LINER KIT FOR LEAF SPRINGS ...
127
LEAF SPRING CENTRE BOLT SLEEVES ..
127
LEAF SPRING SPECIFICATIONS .......
128
COIL SPRING SPECIFICATIONS .........
131
NITROCHARGER SPORT SPECIFICATIONS ...
137
NITROCHARGER SPECIFICATIONS ...
140
SHOCK ABSORBER MOUNT TYPE ....
144
TORSION BAR SPECIFICATIONS ....
144
STEERING STABILISER SPECIFICATIONS .......
145
RECOMMENDED FITTING TIMES ...........
146
ARB Corporation Limited, Old Man Emu Division P.O. Box 105 Kilsyth, Vic. 3137 Australia.
All rights reserved. No part of this catalogue may be reproduced or copied in any form or by any means (graphic, electronic or mechanical,
including photocopying, recording, taping or information systems) without the written permission of the publisher.

PAGE 3

GUIDE TO SELECTION

Terminologies & Explanations


Please note most suspension development has been carried out on Australian specification models. Therefore, some differences
may exist between the same model in another country. Overseas customers will need to make allowances for these possible
differences.
Supplying all items shown on suspension selection charts will ensure the system can be fitted, however, there will be vehicles
which will not require all items, eg. trimming kits, caster kits, all U bolts shown, etc. Actual individual vehicle requirements can
only be determined when the suspension system is fitted.

GVM - GROSS VEHICLE MASS: Set by the vehicle manufacturer and is determined by brake, axle, differential and tyre
specifications. Exceeding GVM ratings can have legal and safety implications
and is not recommended.
LOAD RATING - FRONT: Weights shown are maximum permissible loads with regard to
accessories fitted, eg. Bull bar, winch, dual battery, etc.
LOAD RATING: The explanations below indicates the passenger and load weights that will provide optimum ride and handling.
REAR:
LIGHT LOAD: Full passenger load with luggage weights up to 150kg.
MEDIUM LOAD: Full passenger load with luggage weight varying from 200kg to 350kg.
CONSTANT LOAD: The minimum constant load shown on selection chart is required for optimum spring performance.
Please note: These loads are approximate only. Refer to individual vehicle selection for load specifications.
LIFT HEIGHT: Is shown as a guide only and equates to the amount of lift over the vehicle's original
ride height. This amount can vary from vehicle to vehicle.
OE: Original Equipment, as supplied by the manufacturer of the vehicle.
SHOCK ABSORBERS: Where two part numbers are given for the same application the part with the asterisk (*) indicates theshock
absorber with the firmer ride.
SPRING BUSH: OME polyurethane spring eye bushes on installation must only be greased in the bore and on the flange area and
regularly thereafter with OME polyurethane grease.
STEERING STABILISER: Designed as a larger capacity replacement for the OE part and incorporates 50/50 neutral valving.

CASTER KIT: The OMECA77B, CALR1 and CALR2 kits consist of 4 eccentric bushes which are pressed into the leading arms
of the vehicle. This will induce positive caster into the front geometry.
LEAF SPRINGS: A & B springs can be used to compensate for uneven vehicle weight distribution. Springs marked "A" have a
greater camber height than springs marked 'B'. 'A' type springs are generally fitted to the driver's side and 'B' springs to the
passenger side.
COIL SPRINGS: A & B springs are used to compensate for uneven vehicle weight distribution. 'A' type springs are
generally higher in free high than the 'B' spring. Individual coil specifications are listed in the back of this publication.
GEARBOX PACKER KIT: Designed to space down the gearbox cross member from the chassis to reduce tail shaft flange angle
thereby reducing driveline vibration.
GREASABLE SHACKLES: Replacement for original shackles allow easy regular greasing of polyurethane spring eye
bushes.
TRIM PACKERS: The prime purpose of a trim packer is to correct slight vehicle leaning.
VEHICLES WITH LEAF SPRINGS UNDER SLUNG: Trim packer when fitted will reduce suspension height.
VEHICLES WITH LEAF SPRINGS OVER SLUNG: Trim packer when fitted will increase suspension height.
VEHICLES WITH COIL SPRINGS: Polyurethane trim packer main purpose is to correct slight vehicle
trimming problems and will increase ride height when fitted.

PAGE 4

NITROCHARGER SPORT SELECTION


SELECTION ADVICE
Where there is a choice of part numbers it is important the right selection is made with consideration given to type of
spring rates and customer applications.
Firm Valving
The firm part number should be selected whenever heavy rate springs are fitted, as the valving has been specifically
developed to control the higher spring rates. The firmer valving will provide better control when cornering, while also
preventing axle bounce over rough roads.
If a softer valved selection is fitted with a heavy rate spring the vehicle's rebound handling will be reduced. This will be
evident by axle bounce over rough roads, dipping under braking or cornering and wallowing over undulating roads.
Soft Valving
Valved specifically for light to medium rate springs. Most suitable for customers wanting a comfortable ride and regularly
carry light to medium loads. Under full GVM load a slight amount of body roll during cornering and highway speed
manoeuvring can occur.
A RECOMMENDATION FOR CUSTOMERS BUYING 4 REPLACEMENT SHOCK ABSORBERS
By the time a customer has decided to replace the old and well used original shock absorbers there is every chance that
the original springs are also ready for replacement.
It should be explained to the customer that if their springs are sagged and tired that this would cause the shock absorbers
to work a lot harder.
Therefore, the life expectancy of the shock absorbers will be considerably shortened and, when loaded, ride and handling
qualities will also be reduced.
REMEMBER: A good set of shock absorbers will not overcome a bad set of springs.
OME NITROCHARGER SPORT
SHOCKS & STRUTS

YEAR

VEHICLE DESCRIPTION

STEERING
STABILISERS

FRONT

REAR

90026

60124 / 60125 /
60126 / 60127

CHRYSLER JEEP
2011 on

Grand Cherokee WK2

All
2008 on
2002 to 2007
1984 on
2006 on
1997 to 2006
1986 to 1996

Grand Cherokee ZJ
Cherokee/Liberty KK All Models
Cherokee/Liberty KJ ALL Models (OME Springs)
Cherokee XJ - Petrol & Diesel
Wrangler JK - All Models
Wrangler TJ
Wrangler YJ

DAIHATSU
1992 to 1997 Feroza II F310
1988 to 1992 Feroza I F300
1993 on
Rocky F78 Wide Track

60092
9000911
9000911
60052
60066
*60047 / 60046
60098

60093
60069
60069
60053
60067
*60049 / 60048
60099

OMESD40

10

60040
60040
60031

N/A
N/A
N/A

*9002013 / 9001913

*60102 / 60101 /
60023
*60102 / 60023
60122
60122
60023
60023

OMESD409
OMESD48
9

OMESD40
OMESD40

OMESD3112 '86 on

FORD
2011 on

Ranger PX

2006 to 2011
2011 on
2008 to 2010
1985 to 2005
1987 to 1993

Ranger PJ All Models


F250 & F350 Diesel
F250 & F350 Diesel
Courier/Ranger Pick Up
Raider Wagon

600224
60123 / 6012115
60123 / 6012115
600224
60022

All

Maverick Wagon & Hard Top

*60013 / 61012

*60015 / 61014

HOLDEN/ISUZU/CHEVY
2012 on
GM/Isuzu Pick Up Colorado / DMAX
2008 to 2011 GM/Isuzu Pick Up Colorado RC / DMAX
2003 to 2011 Rodeo Pick Up RA Models
7/81 to 2003 Rodeo/Isuzu Pick Up KB4, KBD4 & TFS
1992 to 2004 Jackaroo/Trooper & Monterey (Isuzu Wagon)

*9002313 / 9002213
60031
60031
60031
60031

*60117 / 60116
*60064 / 60032
*60064 / 60032
*60064 / 60032
60074

11/86 to 3/92 Jackaroo/Trooper

60031

1982 to 10/86 Jackaroo/Trooper


99 to 6/2003 Frontera Wagon
1995 to 1998 Frontera UT

60031
60031
60031

*60063 / 600098
*60064 / 60032
*60064 / 60032
N/A
60074

HUMMER
07/2007 on

90001

60045

H3

To 8/89 OMESD34
9/89 on OMESD36

Cont.

PAGE 5

NITROCHARGER SPORT SELECTION


OME NITROCHARGER SPORT
SHOCKS & STRUTS

YEAR

VEHICLE DESCRIPTION

HYUNDAI
2001 on
2005 on

FRONT

REAR

Terracan V6
Terracan Diesel

60040
60040

60060
60060

60024
60037
60037
60037
*60070 / 60018

*60025 / 60026
*60039 / 60038
*60039 / 60038
*60039 / 60038
*60070 / 60018

*9002013 / 9001913

*60102 / 60101 /
60023

2006 to 2011 Mazda BT50 All Models

600224

*60102 / 60101 /
60023

1987 to 2006 B2600 Pick Up All Models

600224

60023

60113

60114

STEERING
STABILISERS

LAND ROVER
1999 to 2004 Discovery Series II (Not Suitable for Airbag Models)
1991 to 1999 Discovery Series I
To 5/1995
Range Rover (Not Suitable for Airbag Models)
Defender & County 90, 110 & 130
1984 on
Defender & County 110 & 130 Long Travel

OMESD02
OMESD11
OMESD11
OMESD32
OMESD32

MAZDA
2011 on

Mazda BT50

MERCEDES
G-Wagon G350 Bluetech / G55 AMG Models
MITSUBISHI
4/2000 on
Pajero/Montero NS, NM, NP & NT LWB & SWB
91 to 3/2000 Pajero/Montero (Coil Springs) NH, NJ, NK & NL
91 to 3/2000 Pajero/Montero (Leaf Springs) NH, NJ, NK & NL
1989 to 5/91 Pajero/Montero (Coil Springs) NF & NG
Pajero/Montero (Leaf Springs) NA, NB, NC, ND, NE, NF
To 4/1991
& NG
2009 on
2000 to 2008
1998 to 2000
7/2006 on
10/96 to 6/06
1993 to 9/96
91 to 8/96
10/86 to 1993
To 1986
To 9/1986

Challenger/Montero Sport KH
Challenger/Montero Sport (Coil Springs)
Challenger/Montero Sport (Leaf Springs)
Triton/L200 ML & MN All Models
Triton/L200 MK Models
Triton/L200 MJ Models
Triton/L200 V6 (OE Springs)
Triton/L200 (V6 & 4 Cylinder) ME, MF, MG, MH
L200 MA, MB, MC & MD
L300 Vans SA, SB, SC & SD

13

*90007 / 90006
60040
60040
60051

13

60051
13

90008
60040
60040

9000813
60040
60051
60051
60051
60051
60051

*60033 / 60019
60041
*60036 / 60057
60056
*60036 / 60057
*60075 / 60076
60059
*60036 / 60057
60036
60050
60058
60057
60058
60058
60032

NISSAN
2/2000 on
1997 to 1/00
1997 on
1997 on
To 8/1989
9/1989 on
1988 to 7/97
2005 on
1986 to 8/95
2005 on
10/2002 on
1/86 to 8/02
1/1986 on
1980 to 1985
1996 to 1999
2005 on

Patrol Y61 (GU) SWB & Wagon


Patrol Y61 (GU) Wagon & SWB
Patrol Y61 (GU) Cab Chassis (Leaf Spring Rear)
Patrol Y61 (GU) Cab Chassis (All Coil Springs)
Patrol Y60 (GQ) Wagon & SWB
Patrol Y60 (GQ) Wagon, SWB & Cab Chassis
Patrol Y60 (GQ) Ute & Cab Chassis (Leaf Springs)
Pathfinder R51
Pathfinder/Terrano WD21
Navara D40
Navara D22
Navara D21 & D22 Pick Up
Navara D21 & D22 Pick Up 4x2
720 Ute & Cab Chassis
Terrano II 4x4 (European Models)
Xterra

SSANGYONG
To 2005
Musso, Sport Utility & Korando Models

*60013 / 61012
*60013 / 61012
60055
*60013 / 61012
*60013 / 61012
*60013 / 61012
60068
9000313
60031
9000313
600342
2
60021
600402
600402
60031

*60015 / 610143
*60015 / 610143
60054

OMESD01
OMESD11

*60015 / 610143
*60015 / 61014
*60015 / 61014
60054
60016
*60064 / 60032
*60110 / 60017
60035
60035
N/A
*60064 / 60032
60058

OMESD11
OMESD34
OMESD36
OMESD22

9000313, 14

60017 14

60031

N/A

9000313

60017

OMESD35

OMESD35

SUZUKI
2009 on

Equator (US Market Only)

TOYOTA
2007 on
3/1998 on
3/1998 on
4/90 to 1998
2009 on

LandCruiser 200 Series V8


LandCruiser 100 Series (IFS)
LandCruiser 100 & 105 Series (Front Live Axle)
LandCruiser 80 Series
Prado 150 Series LWB

*91005 / 90017
*60001 / 60000
*60070 / 60018
*60070 / 60018
9001013

*61030 / 61029
*60003 / 600021
*60071 / 600201
*60071 / 600201
*60081 / 60080

OMESD24
OMESD24

Cont.

PAGE 6

NITROCHARGER SPORT SELECTION


OME NITROCHARGER SPORT
SHOCKS & STRUTS

YEAR

VEHICLE DESCRIPTION

TOYOTA (continued)
2009 on
Prado 150 Series SWB

FRONT
13

*90010

/ 90016

STEERING
STABILISERS

REAR
13

4/2003 to 09 Prado 120 Series LWB & SWB (Not TEMS/Grande Models) *9000013 / 9002113

*60080 / 60086
1

*60005 / 60004
1
1
*60004 / 60112
*60027 / 60028

7/96 to 10/02 Prado 95 & KZJ90 Series

90004

2007 on

LandCruiser 78 & 79 Series V8 Diesel Model

60008

*60011 / 60010 /
60109

OMESD47

2007 on

LandCruiser 76 Series Wagon - V8

60008

*60111 / 60011 /
60010

OMESD47

1999 to 2006 LandCruiser 78 & 79 Series - 6 cylinder models


1985 to 1999
1985 on
All
All

LandCruiser 75 Series
LandCruiser 70, 73 & 74 Series
LandCruiser HZJ71 & HJZ74 Series
LandCruiser II Wagon

1984 to 1990 Bundera RJ70

60008
*60063 / 60009
60009
60008
60089
60094

1986 to 3/90
1980 to 1986
All
All

LandCruiser 60,61 & 62 Series (Rear Lower Pin 19mm)


LandCruiser 60 Series (Rear Lower Pin 16mm)
LandCruiser 45 - 47 Series
LandCruiser 40 - 42 Series SWB

2010 on

FJ Cruiser

*9001013 / 9001613

2006 to 2010 FJ Cruiser

*9000013 / 9002113

2004 on
2005 on
9/97 to 2004
9/83 to 8/97
1988 to 8/97
To 8/1983
2005 on
1998 to 2004
2010 on
2003 to 2010
1996 to 2002
1990 to 1996
1986 to 1990

Fortuner
HiLux Vigo KUN26R, GGN25R
HiLux Tiger LN172, LN167, KZN165, RZN174 &
RZN169 (IFS)
HiLux LN65, YN65, LN106 & RN105 (All Leaf Suspension)
HiLux/4 Runner LN107, RN105, RN110 & LN111 (IFS)
HiLux LN46 & RN46 (All Leaf) (Rear Lower Pin 16mm)
Tacoma V6
Tacoma V6 & 4 Cylinder
4 Runner (USA)
4 Runner (USA)
4 Runner Front & Rear Coil Springs (USA)
4 Runner (IFS) Front Torsion Bar/Rear Coil Springs
4 Runner (IFS) Rear Leaf Springs

*60063 / 60009
*60063 / 60009
60097
60097

*9000213 / 9001113
*9000213/9001113
60042
60061
60072
60061
*9000013 / 9002113
90004

*60011 / 60010 /
60109
*60011 / 60010
60062
60044
60090

60096
60095
RHS
LHS
*60065 / 60062
*60064 / 60032
*60064 / 60032
*60064 / 60032
*600811 / 600801
*600801 / 600861
*600041 / 601121
60081 1
60078 / 60077
*60007 / 60006
60044
600437
LHS
RHS
*60065 / 60062
*60065 / 60062
*60064 / 600321
60091
*60065 / 60062

9001013
9000013
90004
60072
60072

*60081 / 600801
*60005 / 60004
*60027 / 60028
60073
60065

*90013 / 90012

*60083 / 60082

OMESD24
OMESD24
OMESD24
OMESD24

OMESD24
OMESD24
OMESD23
OMESD23

OMESD33
OMESD21
OMESD21

OMESD33
OMESD33

VOLKSWAGEN
2010 on

Amarok

NOTES: *first part number has firmer valving.


1. Shock lower body stone guards are recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. OME661 (suits
Sorento BL To 09, FJ Criser 06 On, 4 Runner 10 On, LandCruiser 76 LWB, 80, 100, 200 Series & Prado 150 09 on coil sprung not Kakadu, 120 Series 10/02 to 09
not Grande only) OME660 (all other models).
2. It may be necessary to slightly increase the clearance in the front wishbone to allow the shock absorber to fit. Do not modify the shock absorber.
3. FK18 rear sway bar extension bracket for LWB Models and FK24 for SWB Models are mandatory fitments with Nitrochargers to prevent damage
to sway bar due to increased wheel droop.
4. FK22 support brackets must be installed to upper shock mounting brackets on late 1996 on models manufactured in Thailand.
5. OME Struts can only be installed with OME Coil Springs. No top mounting bushes supplied, re-use OE bushes.
6. OMESD35 will suit D21 models only.
7. 60043 is 20mm longer and must only be installed to right hand side.
8. OMEB11 bush kit is required to convert lower 19mm bush to 16mm ID.
9. OMESD40 will only fit left hand drive models.
10. FK16 20mm bump stop spacer kit is a mandatory fitment.
11. No top mounting bushes supplied, re-use OE bushes.
12. When remaining stock of OME P/No. is exhausted no further product will be available.
13. No top mounting bushes supplied, refer to vehicle specific application to select relevant upper strut bushes. OE bushes may be re-used if in good condition.
14. FK42 is a mandatory fitment to space sway bar link away from shock absorber.
15. OME front shock 60121 is not suitable as an OE replacement. When fitting our longer OME shock 60121 you must fit: FK71 brakeline kit to extend/drop the brakelines, FK72
sway bar kit to lower the front swaybar, FK70 radius arm drop bracket kit to 2011 on models, FK80 to 08 - 10 models as if not fitted you may over stretch the front brakelines.

PAGE 7

NITROCHARGER SPORT SELECTION


REPLACEMENT NITROCHARGER SPORT DIRT SHIELDS
Sport Dust Boot - Black
Confluted Boot
Hard Sport Dirt Shield
Hard Sport Dirt Shield
Hard Sport Dirt Shield
Hard Sport Dirt Shield

PART NUMBER
141-032-028
OME412422
384006170
384006210
384006250
384006290

170mm long
210mm long
250mm long
290mm long

Note: The last 3 numbers of the part number indicates the length of the dirt shield.

NITROCHARGER SPORT L SERIES


Vehicle
Jeep JK
(Middle Front)
Jeep XJ
Jeep TJ
Patrol Y60, Y61
LandCruiser 80, 100
Discovery I to 99
Discovery II to 04
Defender 90, 110, 130
Range Rover to 5/95
Non Airbag Models

Front

Open
(mm)

Closed
(mm)

Rear

Open Closed
(mm) (mm)

60066L
60066M
60052L
60047L
60013L
60070L
60018L
60037L
60024L
60037L

693
646
678
678
555
667
667
593
627
593

404
382
392
392
322
381
381
349
388
349

60067L
n/a
60053L
60049L
60015L
60071L
60020L
60039L
60025L
60039L

706
n/a
622
622
716
673
673
600
627
600

422
n/a
366
366
426
387
387
366
388
366

60037L

593

349

60039L

600

366

Remarks
Refer to page 135 to 137 of the OME International Application Catalogue for open and closed lengths of equivalent
standard Nitrocharger Sport models.
Warranty Implications
The fitter selling these shocks must inform the customer there is no warranty due to the severe nature of
competition racing. The fitter must also note on the customer's receipt "racing application no warranty
applies". This will prevent any future misunderstanding.

PAGE 8

NITROCHARGERS & STEERING STABILISERS


SHOCK ABSORBER SELECTION ADVICE
Where there is a choice of part numbers it is important the right selection is made with consideration given to type of spring
rates and customer applications.
Firm Valving
The firm part number should be selected whenever heavy rate springs are fitted, as the valving has been specifically
developed to control the higher spring rates. The firmer valving will provide better control when cornering, while also
preventing axle bounce over rough roads.
If a softer valved selection is fitted with a heavy rate spring the vehicle's rebound handling will be reduced. This will be
evident by axle bounce over rough roads, dipping under braking or cornering and wallowing over undulating roads.
Soft Valving
Valved specifically for light to medium rate springs. Most suitable for customers wanting a comfortable ride and regularly
carry light to medium loads. Under full GVM load a slight amount of body roll during cornering and highway speed
manoeuvring can occur.
A CAUTION FOR CUSTOMERS BUYING 4 REPLACEMENT SHOCK ABSORBERS
By the time a customer has decided to replace the old and well used original shock absorbers there is every chance that the
original springs are also ready for replacement.
It should be explained to the customer that if their springs are sagged and tired that this would cause the shock absorbers to
work a lot harder.
Therefore, the life expectancy of the shock absorbers will be considerably shortened and when loaded ride and handling
qualities will also be reduced.
REMEMBER: A good set of shock absorbers will not overcome a bad set of springs.
OME NITROCHARGERS,
STRUTS & CARTRIDGES

YEAR

VEHICLE DESCRIPTION

FRONT

REAR

*N219S/N188S

*N220/N190
N132
N132
*N220/N190
N117
See Sport Selection
N36

STEERING
STABILISERS

CHRYSLER JEEP
2006 to 2010
2008 on
2002 to 2007
2006 to 2010
1998 to 2005
1992 to 1998
1984 on
To 1986
1974 to 1986
To 1986
2006 on
1997 to 2006
1986 to 1996

Comander XK
Cherokee/Liberty KK ALL Models
Cherokee/Liberty KJ ALL Models (OME Springs)
Grand Cherokee WH & WK
Grand Cherokee WJ & WG
Grand Cherokee ZJ - 6 cylinder & V8 engines
Cherokee XJ - Petrol & Diesel
Cherokee Wagon & J10 Ute (Full Size)
Cherokee W10 & J20 Utes and Cab Chassis
CJ5, 6, 7, & 8
Wrangler JK - All Models
Wrangler TJ
Wrangler YJ

DAIHATSU
1992 to 1997
1988 to 1992
1993 on
1984 to 8/93
1984 to 1993
All

Feroza II F310
Feroza I F300
Rocky F78 Wide Track
Rocky F70, F75, F80 & F85 Hard Top with Leaf Springs
Rocky F77 & 78 Tray Top with Leaf Springs
Scat Hard Top

FORD
2006 to 2011
1985 to 2005
To 2001
2005 to 2008
1999 to 2004
1987 to 1993

Ranger PJ All Models


Courier/Ranger 1 Tonne
Explorer 4x4 Only
Ford F250 & F350
Ford F250 & F350
Raider Wagon

All

Maverick Wagon & Hard Top

All
1981 to 1989
1981 to 1989
1981 to 1989

Maverick Ute & Cab Chassis


Bronco (Single I Beam Front End)
Bronco (Dual I Beam Front End)
F100 4x4 & 4x2 (Single I Beam)

NS13116
*NS131/NS13016, 18
*N219S/N188S16
N11111
*N3918/N39C18
N35
N411
N411
*N41/N811
*N196

N561
N43
*N56/N54
*N198

OMESD4010
OMESD4010

OMESD48

*N66/N66C18
N33

N675
N3418

OMESD4010
OMESD4010

N18
N18

*N49/N96
N43
N33
N43
*N48/N97
*N48/N97

OMESD3118 '86 on
OMESD3118 '86 on

N26F18
OME027
OME027
N41/N81
N19418/N1878, 18
N518,18
N16
N195
N178
18

N51

*N2118/N23F18
N2818

HOLDEN/ISUZU/CHEVY
2008 to 2011 GM/Isuzu Pick up - Colorado RC/DMAX Diesel Models
2008 to 2011 GM/Isuzu Pick up - Colorado V6/DMAX Petrol
2003 to 2011 Rodeo Pick Up - RA Models
2003 to 2008 Rodeo Pick Up - RA & RA7 Models

N65
N65
N65
N65

PAGE 9

N5318
N17
N179
N179+N1809
N5318
N29
N25
N423
N423
N423
*N42/N89
*N42/N89
*N42/N89
*N42/N89

To 8/89 OMESD34
9/89 on OMESD36
OMESD22

NITROCHARGERS & STEERING STABILISERS


OME NITROCHARGERS,
STRUTS & CARTRIDGES

YEAR

VEHICLE DESCRIPTION

HOLDEN/ISUZU/CHEVY (continued)
7/81 to 2003 Rodeo/Isuzu Pick Up KB4, KBD4 & TFS
1992 to 2004 Jackaroo/Trooper & Monterey (Isuzu Wagon)
11/86 to 3/92 Jackaroo/Trooper
1982 to 10/86 Jackaroo/Trooper
99 to 6/2003 Frontera Wagon
1995 to 1998 Frontera 2 & 4 Door UT
1985 to 1987 Drover QB (OE Springs)
1985 to 1987 Drover QB (OME Springs Fitted)

FRONT

REAR

*N65/N26F18
N65

*N42/N89
*N42/N89
*N42/N89
N102
OME023
OME013

18

*N65/N26F
18
*N65/N26F
18
*N65/N26F
18
*N65/N26F
OME025
OME015

KIA
2006 to 2009 Sorento All BL Models
02 to Late 06 Sorento All Models

16

N205
N149

18

N108
18
*N44/N46
14
N177
18
*N44/N46
*N44/N4618
N69

N147S + N148S
16
N147S + N148S

STEERING
STABILISERS

OMESD30
OMESD30

LAND ROVER
1999 to 2004
1991 to 1999
1994 to 2001
To 5/1995
1984 on
To 1984
To 1984

18

Discovery Series II (Not Suitable for Air Bag Models)


Discovery Series I
Range Rover MK II P38A Models
Range Rover (Not Suitable for Air Bag Models)
Defender & County 90, 110 & 130
Land Rover Series I, II & III (80" & 109")
Land Rover Series II & III (88" SWB)

*N107 /N107C
18
*N115/N45F
14
N176
*N115/N45F18
*N115/N45F18
N78
N78

MAHINDRA
1990 to 1993 Bushranger & Stockman CJ340
MAZDA
06 to 2011
Mazda BT50 All Models
1987 to 2006 B2600 Pick Up All Models
MITSUBISHI
4/2000 on
Pajero/Montero NS, NM, NP & NT (3.2 Diesel)
4/2000 on
Pajero/Montero NS, NM, NP & NT Wagon & Hard Top (V6)
1991 to 3/00 Pajero/Montero (Coil Springs) NH, NJ, NK & NL
1991 to 3/00 Pajero/Montero (Leaf Springs) NH, NJ, NK & NL
1989 to 5/91 Pajero/Montero (Coil Springs) NF & NG
Pajero/Montero (Leaf Springs) NA, NB, NC, ND, NE, NF &
To 4/1991
NG
2009 on
2000 to 2008
1998 to 2000
7/2006 on
10/96 to 6/06
1991 to 8/96
1991 to 8/96
1986 to 8/96
To 1986
To 9/1986

Challenger/Montero Sport KH
Challenger/Montero Sport (Coil Springs)
Challenger/Montero Sport (Leaf Springs)
Triton/L200 ML & MN All Models
Triton/L200 MK All Models
Triton/L200 V6 (OE Springs)
Triton/L200 (V6) MH & MJ
Triton/L200 (4 Cylinder) ME, MF, MG, MH & MJ
L200 MA, MB, MC & MD
L300 Vans SA, SB, SC & SD

18

N9018

*N41/N811

*N41/N811

*N19418/N1878,18
N518,18

N18918
N5318

N129S19
N129S19 N109S16, 18
N18
N18
See Sport Selection

*N20418/N152
*N20418/N152
N6418
*N56/N54
See Sport Selection

See Sport Selection

*N56/N54

OMESD02
OMESD11
OMESD11
OMESD32
OMESD11
OMESD11

N186S
N57G18
N57G18
N186S19
*N18/N57G18
See Sport Selection
See Sport Selection
See Sport Selection
See Sport Selection
See Sport Selection

N116
N116
*N56/N54
*N59/N54
N30E
N30E

*N19/N19C18
*N19/N19C18
*N19/N19C18
*N19/N19C18
*N2118/N23F18
*N2118/N23F18
N2820
N49
*N47/N96
N49

*N29/N29C6,18
*N29/N29C6,18
N25

OMESD01
OMESD11

*N29/N29C6,18
*N29/N22F18
*N29/N22F18
N25
*N48/N97
*N48/N97
N49
See Sport Selection
N104
N61
*N42/N89
N185
*N59/N56
*N59/N56
*N41/N81

OMESD11
OMESD34
OMESD36
OMESD22
OMESD22
OMESD22
OMESD22

19

N3018
N3018
N3018
N89

NISSAN
2/2000 on
1997 to 1/00
1997 on
1997 on
To 8/1989
9/1989 on
1988 to 7/97
8/83 to 1988
1980 to 7/83
1967 to 1979
2005 on
2/99 to 2005
1996 to 1/99
1986 to 8/95
2005 on
10/2002 on
1/86 to 8/02
1/1986 on
1996 to 2005

Patrol Y61 (GU) SWB & Wagon


Patrol Y61 (GU) Wagon & SWB
Patrol Y61 (GU) Cab Chassis (Leaf Spring Rear)
Patrol Y61 (GU) Cab Chassis (All Coil Springs)
Patrol Y60 (GQ) Wagon & SWB
Patrol Y60 (GQ) Wagon, SWB & Cab Chassis
Patrol Y60 (GQ) Ute & Cab Chassis (Leaf Springs)
Patrol MQ Wagon, SWB, Ute & Cab Chassis
Patrol MQ Wagon, SWB, Ute & Cab Chassis
Patrol 60 & G60 Series
Pathfinder R51
Pathfinder R50
Pathfinder R50
Pathfinder/Terrano WD21
Navara D40
Navara D22
Navara D21 & D22 Pick Up
Navara D21 & D22 Pick Up 4x2
Terrano II 4x4 (European Models) (OE Springs)

N183S19
N145S/N146S
N145S/N146S
N26F18
19
N183S
N1514,18
N584,18
*N18/N57G4, 18
*N65/N26F18

PAGE 10

N3018

OMESD35

OMESD3512

NITROCHARGERS & STEERING STABILISERS


OME NITROCHARGERS,
STRUTS & CARTRIDGES

YEAR

VEHICLE DESCRIPTION

FRONT

REAR

N183S19
4, 18
*N18/N57G

N185
*N42/N89

N65

N118

N183S19
17
N103S
N217S + N218S
N103S
N103S
N103S
OME028
OME028
OME034
OME015
OME025
OME015
OME025
OME015
OME015

N185
N105
OME036
N105
N105
N32

STEERING
STABILISERS

NISSAN (continued)
2005 on
Xterra
1980 to 1985 720 Ute & Cab Chassis

20

SSANGYONG
To 2005

Musso, Sport Utility & Korando Models

SUZUKI
2009 on
2001 to 2005
8/2005 on
1995 to 2005
7/88 to 2005
7/88 to 2005
All
All
To 2004
1982 to 1995
1988 to 1996
1978 to 12/81
1978 to 12/81
1978 to 12/81
1974 to 12/81
TOYOTA
2007 on
3/1998 on
3/1998 on
4/90 to 1998
4/2003 to 09

Equator (US Market Only)


XL7 Wagon V6
Grand Vitara Wagon Models
Grand Vitara 4 & 6 Cylinder
Vitara TA01 & TD01 & Wagon
Vitara TA012 TD01 SWB
Jimny SN413 (OE Springs)
Jimny SN413 (OME Springs)
Santana Samurai All Models

Sierra SJ410 & SJ413 Ute MG410 / WT1000cc (OME Springs)


Sierra SJ70, SJ71, SJ413, MG410 / WT1300cc (OME Springs)
LJ80 & LJ80V SWB (OME Springs)
LJ80 & LJ80V SWB (OE Springs)
LJ80 Ute (OME Springs)
540, LJ10, LJ20 & LJ50 (OME Springs)

N208S9
*N19918/N133/N10018
*N73
*N73

LandCruiser 200 Series V8


LandCruiser 100 Series (IFS)
LandCruiser 100 & 105 Series (Front Live Axle)
LandCruiser 80 Series
Prado 120 Series (Except TEMS/Grande Models)

*N201S18, 19/N140S19
*N91SB18/N91S
/N91SC18

7/96 to 10/02 Prado 95 & KZJ90 Series


2007 on
2007 on
1999 to 2006
1985 to 1999
All
1984 to 1990
1985 on
All
1986 to 3/90
1980 to 1986
1980 to 1986
1986 to 3/90
To 11/1980
To 12/1984
To 12/1984
To 12/1984
2004 on
2006 to 2010
2005 on

18

LandCruiser 78 & 79 Series V8 Diesel Model


LandCruiser 76 Series Wagon - V8
LandCruiser 78 & 79 Series - 6 cylinder models
LandCruiser 75 Series
LandCruiser II LJ/RJ70, LJ/KZJ71 & LJ/KZJ78 Models
LandCruiser Bundera, SWB, LJ70 & RJ70 Series
LandCruiser 70,73 & 74 Series
LandCruiser HZJ71 & HJZ74 Series
LandCruiser 60,61 & 62 Series (Rear Lower Pin 19mm)
LandCruiser 60 Series (Rear Lower Pin 16mm)
LandCruiser 60 Series (OE Springs)
LandCruiser 60 Series (OE Springs)
LandCruiser FJ55
LandCruiser 45 & 47 Series

*N181/N106
*N181/N10618
N10618
*N5018/N9218
N77
N114

LandCruiser BJ, FJ & HJ 40 & 42 Series All Models


LandCruiser BJ, FJ & HJ 40 & 42 Series All Models (OE Springs)
Fortuner
FJ Cruiser
HiLux Vigo KUN26R, GGN25R
HiLux Tiger LN172, LN167, KZN 165, RZN174 &
9/97 to 2004
RZN169 (IFS)
9/83 to 8/97 HiLux LN65, YN65, LN106 & RN105 (All Leaf Suspension)
9/83 to 8/97 HiLux LN65, YN65, LN106 & RN105 (OE Springs)
1988 to 8/97 HiLux/4 Runner LN107, RN105, RN110 & LN111 (IFS)
1988 to 8/97 HiLux/4 Runner LN107, RN105, RN110 & LN111(IFS)(OE Springs)
HiLux LN46 & RN46 (All Leaf) (Rear Lower Pin 16mm)
To 8/1983
HiLux LN46 & RN46 (All Leaf) (Rear Lower Pin 16mm) (OE Springs)
To 8/1983
2003 to 2012 4 Runner (USA)
1996 to 2002 4 Runner Front & Rear Coil Springs (USA)
1990 to 1996 4 Runner (IFS) Front Torsion Bar/Rear Coil Springs
1986 to 1990 4 Runner (IFS) Rear Leaf Springs (OE Springs)
1986 to 1990 4 Runner (IFS) Rear Leaf Springs
1984 to 1986 4 Runner (Front Live Axle) (OE Springs)
1984 to 1986 4 Runner (Front Live Axle)
1982 to 1983 Blizzard

*N5018/N9218
N10618
*N5018/N9218
*N5018/N9218
N5018
N5018
N43
*N41/N81
*N41/N81
N41

17, 18

OME030
OME029
OME035
OME013
OME013
N43
N/A
OME013
OME013

*N21018/N209
*N20018/N101
*N74E/N71E2, 18
*N74E/N71E2, 18
*N20218/N141

13

OMESD30
13
OMESD30
OMESD3013
OMESD3013
OMESD3013,14
OMESD3013

OMESD24
OMESD24

*N86
N197
N197
N75F18
N75F18
N79
N112 & N113
*N85/N94
-

OMESD47
OMESD47
OMESD24
OMESD24
OMESD24
OMESD24
OMESD24
OMESD24
OMESD24
OMESD24
OMESD24

*N167S19/N166S19
N140S19
*N167S19/N166S19

*N9018/N85/N94
*N42/N89/N95
N42
N9019/N85
N42
*N42/N89
*N89/N95
N42
N191
N141
*N169/N168

N8018

*N7518

OMESD33

*N85/N94

OMESD21
OMESD21

18

N84
N8418
N98
N98
N8418
N8418
N140S19
*N91S/N91SC18
N98
N98
N98
N8418
N8418
*N41/N81

PAGE 11

*N9018/N85
*N85/N94
*N9018/N85
*N89/N952
*N42/N89
N141
N86
N72F
N85/N94
N85/N94
N9019/N85
N85/N94
N48

OMESD23
OMESD23
OMESD23

OMESD33
OMESD21
OMESD21

OMESD33
OMESD33
OMESD33
OMESD21
OMESD21

NITROCHARGERS & STEERING STABILISERS


OME NITROCHARGERS,
STRUTS & CARTRIDGES

YEAR

VEHICLE DESCRIPTION

TOYOTA (continued)
1997 to 2003 Kijang (4th Gen.)
2005 to 2010 Tacoma V6
Tacoma V6
To 2004
Tundra
2007 on

FRONT

REAR

N128
N140S
18
*N91S/N91SC
16
N192S

N56
N182
N85
N193

N38S

N37

19

STEERING
STABILISERS

VOLKSWAGEN
1985 to 1990 Syncro 4x4
NOTES: *first part number has firmer valving.
1. 1983 and on wide track CJ Jeeps require bush kit OMEB27 for the front lower mount and all Cherokee wagons and Mahindra lower
front and rear mounts.
2. Shock lower body stone guards are recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. OME661 (suits
Sorento BL To 09, FJ Criser 06 On, 4 Runner 10 On, LandCruiser 76 LWB, 80, 100, 200 Series & Prado 150 09 on coil sprung not Kakadu, 120 Series 10/02 to 09
not Grande only) OME660 (all other models).
3. 1981 on F100 and Bronco require bush kit OMEB27 on bottom rear mount.
4. It may be necessary to slightly increase the clearance in the front wishbone to allow the shock absorber to fit. Do not modify the shock absorber.
5. FK16 20mm bump stop spacer kit mandatory fitment.
6. FK18 rear sway bar extension bracket for LWB models and FK24 for SWB models are mandatory fitment with Nitrochargers to prevent damage
to sway bar due to increased wheel droop.
7. FK22 support brackets must be installed to upper shock mounting brackets on late 1996 on models manufactured in Thailand.
8. N208S can only be installed with OME Coil Springs. No top mounting bushes supplied, re-use OE bushes.
9. N179 suits models with single rear shock set up. Models with twin rear shocks require N179 fitment rear of axle, N180 front of axle, also fitment
of OME660 stone shields are recommended on the N180.
10. OMESD40 will only fit left hand drive models.
11. To obtain maximum ride quality improvement it is recommended that an OME replacement stabiliser bar (OMESTAB1) be fitted.
12. OMESD35 will suit D21 models only.
13. Only suitable for models equipped with original steering damper.
14. Shocks are the same length as OE.
15. OME03019 is shorter than OME029 and must be used with OE coils to ensure coils remain entrapped.
16. No top mounting bushes supplied, re-use OE bushes.
17. FK28 Bump Stop Spacer Kit is a mandatory fitment with N103S Struts.
18. When remaining stock of OME P/No. is exhausted no further product will be available.
19. No top mounting bushes supplied, refer to vehicle specific application to select relevant upper strut bushes. OE bushes may be re-used if in good condition.
20. FK42 is a mandatory fitment to space sway bar link away from shock absorber.

Note: Replacement dust boot part numbers: Nitrocharger OME412422 - Small


Replacement dust boot part numbers: Nitrocharger OME512422 - Large

PAGE 12

COMPACT AWD - OME SPRING & SHOCK ABSORBER


YEAR

VEHICLE DESCRIPTION

LIFT
F/R
(mm)

FRONT

Terios J100 J102

20/20

2531

2532

Escape BA ZA AB
Territory SX SY AWD (4WD)

30/30
20/30

2904
2533

2905
2534

Captiva, Antara - V6 (3.2) & Diesel

20/30

2529

2530

UNIT
PRICE

REAR

DAIHATSU
97 to 2006

FORD
To 06/2006
04 to 10/2007

GM / OPEL
2006 on

HONDA
2
20/20
2535
-/20 CANNOT LIFT
30/30
2797

2536
2538
2798

Santa Fe CM V6 (2.7) & Diesel


Santa Fe
OME Front - Cartridge, Rear - OME Gas

20/30
10/20

2528
2908

Sportage V6 & Diesel KM Models


Sportage JA MY02 MY03 - V6

20/20
20/30

01/2007 on
CRV
12/01 to 01/07 CRV MY 2002 MY 2005
10/97 to 11/01 CRV RD

HYUNDAI
05/06 to 8/08
2000 to 2005

2527
2907
No Longer Available

KIA
2005 to 2009
1997 to 2003

2525
2523

2526
2524

LAND ROVER
11/00 to 1/04
To 10/2000
To 10/2000

2503
2505

Freelander V6 & 2Ltr Diesel DOHC - Wagon


Freelander 4 Cylinder Petrol Wagon
OME Cartridge to Suit OME Springs
Freelander V6 & 2Ltr Diesel DOHC
OME Cartridge to Suit OME Springs

10/20
10/20

2502
2504
No Longer Available

10/20

2500
No Longer Available

RX-330 4WD MCU38R MY05 - V6

20/30

2509

2510

Tribute YU MY03 MY04

30/30

2904

2905

X-Trail Petrol
X-Trail Diesel
X-Trail Petrol
X-Trail Diesel
OME Strut to Suit OME Springs

25/25
25/25
20/20
30/30

2511
2513
2506
2507
N213S+N214S

2512
2512
2508
2508
N215S+N216S

Forester MY03 MY04 MY05


Outback 4th Gen MY04 MY05 MY06 4Cyl
Outback 4th Gen MY04 MY05 MY06 6Cyl

20/20
20/20
20/20

2519
2516
2517

2520
2518
2518

NC1381,3
2501
NC1381,3

LEXUS
2003 on

MAZDA
To 06/2006

NISSAN
2007 to 2011
01 to 10/2006
01 to 10/2006

SUBARU
7/02 to 2005
9/03 to 2006

TOYOTA
03 to 04/2007
01/2006 on

Kluger / Highlander MCU20R - V6


Rav 4 LWB ACA33R - 4 Cylinder
Rav 4 SWB & LWB ACA20R ACA21R - Diesel
07/00 to 08/05 Rav 4 SWB & LWB ACA20R ACA21R - Petrol
OME Struts / Gas Shocks to Suit OME Springs
Rav 4 LWB SXA11R MY98 MY99 - Petrol
OME Struts / Gas Shocks to Suit OME Springs
To 2000
Rav 4 SWB SXA11R MY98 MY99 - Petrol
OME Struts / Gas Shocks to Suit OME Springs

20/20
30/30
40/40
40/40

2509
2539
2799
2793
No Longer Available

25/25

2793
No Longer Available

25/25

2793
No Longer Available

NOTES:
1.

Fitting instructions available on the Trade Resources website, www.Sellarb.com.au

2.

Check for LH wound spring.

3.

When remaining stock of OME P/No. is exhausted no further product will be available.

PAGE 13

2510
2540
2795
2795
OME031
2794
OME031
2796
OME031

UNIT
PRICE

LTR REMOTE CANISTERS


LTR SHOCKS

YEAR

VEHICLE DESCRIPTION

LAND ROVER
1991 to 1999 Discovery Series I
Defender & County 90, 110 & 130
1984 on
NISSAN
2/2000 on
97 to 1/2000
1997 on
To 8/1989
9/1989 on
TOYOTA
3/1998 on
3/1998 on
4/90 to 1998
1999 to 2006
9/97 to 2004

Patrol Y61 (GU) Series II SWB & Wagon


Patrol Y61 (GU) Series I Wagon & SWB
Patrol Y61 (GU) Cab Chassis (All Coil Springs)
Patrol Y60 (GQ) Wagon & SWB
Patrol Y60 (GQ) Wagon, SWB & Cab Chassis
LandCruiser 100 Series (IFS)
LandCruiser 105 Series (Front Live Axle)
LandCruiser 80 Series
LandCruiser 78 & 79 Series (6 cylinder models only)
HiLux LN172, LN167, KZN165, RZN174 &
RZN169 (IFS)

FRONT

REAR

LTR04FR&L
LTR05F

LTR04R
-

LTR07F
LTR07F
LTR07F
LTR02F
LTR02F

LTR02R
LTR02R

LTR06F
LTR01F
LTR01F
LTR08FL/FR

LTR06RR&L
1
LTR03RR
1
LTR01RR&L
LTR09RR&L

LTR08RL/RR

NOTES:
1. Fitment of a rear stone flap kit is mandatory to the control arms to prevent stone damage to the shock absorber.
OME662 suits models with 34mm diameter. OME664 suits models with 43mm diameter.
2. Fitment of OME663 stone flap kit is mandatory to prevent damage to piston rod from stone peppering.

Note:

Replacement dust boot part numbers: OME512422 - Large Black


Replacement dust boot part numbers: OME412422 - Small Yellow

GASSING REMOTE CANISTER SHOCK ABSORBERS


The only recommended gas to use in LTR shock absorbers is Nitrogen. A Schrader valve,
part number 2755, from Schrader Automotive Inc is required to guarantee correct pressure
is reached. When using a Schrader valve to gas your LTR Shock absorber first set the
pressure gauge to the required pressure. Attach the Schrader valve to the air fitting at the end
of the remote canister. Gas the canister until the shock absorber shaft is fully extended,
hold gas pressure for 30 seconds, release Schrader valve and remove.
Note: This can be done for you by your Old Man Emu Stockist.
Important: Gassing of your LTR shock absorber should be carried out before fitment to the
vehicle. If LTRs are already fitted the vehicle's suspension should be at full extension before
gassing.
MINIMUM/MAXIMUM GAS PRESSURE
On Road/Off Road
40-80psi (2.8 - 5.5 BAR)
Competition
80-100psi (5.5 - 6.9 BAR)
An increase in gas pressure firms up ride quality but will not alter ride height.
MAINTENANCE
The following checks need to be carried out as part of regular vehicle maintenance.
To ensure maximum cooling of your LTR shock absorber inspect the shock absorber
body and canister for any mud and debris build up and clean if necessary.
Check that the polyurethane boot is securely fastened in place and that it is not damaged.
If the boot is found to be detached thoroughly clean the shock absorber shaft and inside
the boot before reattaching it.
Ensure all polyurethane bushes, locating washers and nuts are in good condition and
securely fastened.
To ensure maximum shock absorber performance check gas pressure every 20,000km.

PAGE 14

ARMOURED APPLICATIONS - 4.5T GVM


TOYOTA LANDCRUISER 200 SERIES - 4.5T GVM

FRONT

PART NUMBER QTY

COILS
FRONT COILS

SHOCKS
NITROCHARGER SPORT

2701

90024

OMESTAB4

FK75

COMPONENTS
FRONT SWAY BAR
FRONT SWAY BAR FITTING KIT
COIL SPRING TRIM PACKER

REAR

PART NUMBER QTY


3067

60119

REAR SWAY BAR

OMESTAB6

STONE GUARD KIT


STRUT TOP HAT KIT
COIL SPRING TRIM PACKER

OME661
OMETH003
OME80PR10

1
2

SHOCKS
NITROCHARGER SPORT

COMMENTS

UNIT
PRICE $

COMMENTS

OME95PF5

COILS
REAR COILS

UNIT
PRICE $

COMPONENTS

Recommended fitment
Replaces OE top hat if worn

NISSAN PATROL Y62 - 4.5T GVM

FRONT

PART NUMBER QTY

COILS
FRONT COILS

SHOCKS
NITROCHARGER SPORT

2978

90025

OMESTAB7

COMPONENTS
FRONT SWAY BAR

REAR

PART NUMBER QTY

COILS
REAR COILS

SHOCKS
NITROCHARGER SPORT

3069

60120

OMESTAB8

COMPONENTS
REAR SWAY BAR

UNIT
PRICE $

COMMENTS

UNIT
PRICE $

COMMENTS

NOTES ON ARMOURED SUSPENSION SELECTION & FITMENT:


The above suspension systems have been designed and tested to suit a vehicle weight range of 3.9 - 4.5T, for vehicle weights
outside this range please contact ARB.
Components have been designed to operate as a complete replacement system, it is not recommended to fit these products
individually.
LC200 Armoured Suspension System was designed for and tested on non-KDSS equipped vehicles.
Y62 Armoured Suspension System was designed for and tested on non-HBMC equipped vehicles.
OME661 Lower Shock Stone Guards are recommended fitment for protection against stone damage on LC200.
All fitting kits, components and replacement bushes are included with the above products where required.

PAGE 15

CHRYSLER JEEP
JEEP COMMANDER XK 2006 TO 2010

FRONT

V8 PETROL & DIESEL

Estimated Lift: 50mm


SPRING: TO 40 KGS
STRUT
SPRING: 41 TO 100 KGS
STRUT

REAR

PART NUMBER
2990
*N219S / N188S
2991
*N219S / N188S

QTY
1

UNIT
PRICE $

1
2
1
2

ALL MODELS

Estimated Lift: 55mm


SPRING: LIGHT LOAD
NITROCHARGER
SPRING: MEDIUM LOAD
NITROCHARGER

PART NUMBER

QTY

2992
*N220 / N190
2993
*N220 / N190

1
2
1
2

UNIT
PRICE $

REMARKS:
1

No top mounting bushes supplied, re-use OE bushes.

JEEP GRAND CHEROKEE WK2 2011 ON

FRONT

V6 PETROL ENGINE

Estimated Lift: 45mm


SPRING: No Bar
STRUT - SPORT
SPRING: Bar
STRUT - SPORT
SPRING: Bar / Winch
STRUT - SPORT
TRIM PACKER

PART NUMBER
3070
90026
3059
90026
3072
90026
FK79

QTY
1

UNIT
PRICE $

3.2L DIESEL ENGINE


PART NUMBER
3073
90026
3086
90026
3085
90026
FK79

1
2
1
2
1
2

ALL MODELS

REAR
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT

PART NUMBER
3074
60124
3060
60125

QTY
1

UNIT
PRICE $

PART NUMBER

QTY

3074
60126
3060
60127

1
2
1
2

1
2
1
2

UNIT
PRICE $

1
2
1
2
1
2

TOW PACK

(EXCLUDES TOW PACK OPTION)

Estimated Lift: 50mm

QTY

UNIT
PRICE $

REMARKS:
1

No top mounting bushes and dirt shield supplied, re-use OE bushes and dirt shield.

Tow Pack option uses a Nivomat (self leveling) shock absorber and requires a specific design.
Please note: when replacing Nivomat shocks, you must fit the appropriate OME spring.
To identify whether a vehicle has the standard fitment rear shock or Nivomat shock, the outer body diameter will need to
be measured:
Standard:
Nivomat:

51mm
63mm

PAGE 16

CHRYSLER JEEP
JEEP GRAND CHEROKEE WH / WK TO 2010

FRONT
Estimated Lift: 50mm
SPRING: TO 40 KGS
STRUT
SPRING: 41 TO 100 KGS
STRUT

REAR
Estimated Lift: 55mm
SPRING: MEDIUM LOAD
NITROCHARGER
SPRING: HEAVY LOAD
NITROCHARGER

V8 PETROL & DIESEL


PART NUMBER
2990
*N219S / N188S
2991
*N219S / N188S

QTY
1

UNIT
PRICE $

1
2
1
2

ALL MODELS
PART NUMBER

QTY

2992
*N220 / N190
2993
*N220 / N190

1
2
1
2

UNIT
PRICE $

REMARKS:
1

No top mounting bushes supplied, re-use OE bushes.

JEEP GRAND CHEROKEE WJ & WG

FRONT
Estimated Lift: 40mm
SPRING: TO 40 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 41 TO 90 KGS
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
STABILISER BAR

REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: HEAVY LOAD
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER

V6 & V8 PETROL ENGINES


PART NUMBER

QTY

2935
60087
N111
2936
60087
N111
OMEWJPF10
OMESTAB1

UNIT
PRICE $

2
1
2

DIESEL ENGINE
PART NUMBER

QTY

2936
60087
N111
2936
60087
N111
OMEWJPF10
-

UNIT
PRICE $

2
2

1
2

2
1

ALL MODELS
PART NUMBER

QTY

2944
60088
N117
2945
60088
N117
OMEWTJPR10

UNIT
PRICE $

2
1
2

REMARKS:
1

OMESTAB1 is a lighter rate OME replacement stabiliser bar which is a recommended fitment so maximum ride
quality improvement can be obtained. (OMESTAB1 does not suit 2.7 Diesel Models).

Add 1 only OMEWJPF10 Trim Packer to increase ride height for vehicles with bull bar and winch.

PAGE 17

CHRYSLER JEEP
JEEP GRAND CHEROKEE ZJ

FRONT
Estimated Lift: 20 - 25mm
SPRING: TO 40 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 41 TO 90 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
COIL PACKER

REAR
Estimated Lift: 20 - 25mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 100 KGS
NITROCHARGER SPORT
COIL PACKER

6 CYLINDER & V8 ENGINES


PART NUMBER
2931
2934
60092
N39
2930
2934
60092
N39
OMESD40
OMEJGF10

QTY
1

3
1

3
2

UNIT
REMARKS:
PRICE $

1
2
1

2931 and 2930 suit 6 cylinder


Models. 2934 suits V8 Models.

OMESD40 will only fit left hand drive


Models.

When existing stock of N39 is


exhausted no further product will be
available.

2
1

ALL MODELS
PART NUMBER

QTY

2940
60093
2943
60093
OMEJGR10

1
2
1
2

UNIT
PRICE $

JEEP CHEROKEE XJ WAGON 1984 ON

FRONT
Estimated Lift: 35 - 45mm
SPRING:
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
STEERING DAMPER

REAR
Estimated Lift: 50mm
SPRING: LIGHT LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
U BOLTS
GEARBOX PACKER KIT
EXTRA LEAF
CENTRE BOLT

PETROL & DIESEL ENGINES


PART NUMBER
2930
60052
N35
OMEJGF10
OMESD40

QTY
3

XJ Models fitted with a 3 bolt engine


exhaust pipe flange, can experience a
clearance problem with the tail shaft,
when suspension is under full
deflection. Fitment of an adjustable
front panhard rod or a change to the
smaller 2 bolt flange will provide the
required clearance.

UNIT
PRICE $

1
2

3
5

REMARKS:

ALL MODELS
PART NUMBER
CS034RA / B
60053
N36
CS035RA / B
60053
N36
OE
OMEU60
OMEU57
XJGK01
D22XL
UCB8

Warning:

QTY
2

UNIT
PRICE $

OMEU60 suits Dana 35 type


differential - Australian Models.
OMEU57 suits AMC 8 1/4 type
differential.

Trimming requirement greater than


10mm use A/A fitment. Where near
level rake is desired B/B fitment
should be used. D22XL extra leaf
can be fitted to CS034RA/B and
CS035RA/B for heavier constant load
carrying ability. NB: Models fitted
with OE Up Country Suspension
Pack will only be raised by 20mm.

OMEJGF10 front coil packer can be


used for trimming or extra lift
purposes, using no more than 1
packer.

Fit XJGK01 Gearbox Packer Kit


should a driveline vibration occur.

OMESD40 will only fit left hand drive


Models.

1+1
2

1+1
2

1
2

PAGE 18

CHRYSLER JEEP
JEEP CHEROKEE/LIBERTY KK

FRONT
Estimated Lift: 30 - 40mm

V6 3.7L PETROL ENGINE


1

SPRING: TO 50 KGS
STRUT - SPORT
STRUT
SPRING: 51 TO 100 KGS
STRUT - SPORT
STRUT

REAR

PART NUMBER

QTY

2926
90009
NS131
2927
90009
NS131

1
2

UNIT
PRICE $

2
1
2

2.8 CRD DIESEL ENGINE


PART NUMBER

QTY

2927
90009
NS131
2790
90009
NS131

1
2

UNIT
PRICE $

2
1

ALL MODELS

Estimated Lift: 40mm


SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 100 KGS
NITROCHARGER SPORT
NITROCHARGER

PART NUMBER

QTY

2730
60069
N132
2731
60069
N132

UNIT
PRICE $

2
1
2

REMARKS:
1 Due to varying OE ride heights, some KK Models may only achieve a 20mm lift.
2 No top mounting bushes supplied, re-use OE bushes.

JEEP CHEROKEE/LIBERTY KJ

FRONT
Estimated Lift: 30 - 40mm
SPRING: NO ACCESSORIES
STRUT - SPORT
STRUT
SPRING: TO 50 KGS
STRUT - SPORT
STRUT
SPRING: 51 TO 100 KGS
STRUT - SPORT
STRUT

REAR
Estimated Lift: 40mm
SPRING: LIGHT LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER

PETROL ENGINE
1

PART NUMBER

QTY

2925
90009
NS130
2926
90009
NS131
2927
90009
NS131

1
2.
3

UNIT
PRICE $

2
1

2
1

ALL MODELS
PART NUMBER

QTY

2947
60069
N132
2948
60069
N132

UNIT
PRICE $

2
1
2

REMARKS:
1

Due to varying OE ride heights, some KJ Models may only achieve a 20mm lift.

No top mounting bushes supplied, re-use OE bushes.

When existing stock of NS130 is exhausted no further product will be available.

PAGE 19

DIESEL ENGINE
PART NUMBER

QTY

2926
90009
NS130
2927
90009
NS131
2790
90009
NS131

1
2
3

2
1

2
1

UNIT
PRICE $

CHRYSLER JEEP
JEEP WRANGLER TJ & TJ UNLIMITED

FRONT
Estimated Lift: 50mm
SPRING: TO 40 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 41 TO 80 KGS
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
STEERING DAMPER

REAR
Estimated Lift: 50mm
SPRING: SOFT TOP
NITROCHARGER SPORT
NITROCHARGER
SPRING: HARD TOP
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 100 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
PANHARD ROD BRACKET KIT
TRIM PACKER
GEARBOX PACKER KIT
BUMPER STOP SPACER KIT

6 CYLINDER ENGINE
PART NUMBER
2932
*60047 / 60046
*N66 / N66C
2933
*60047 / 60046
N66
OMEJGF10
OMESD40

QTY

UNIT
PRICE $

1
6

1
6

2
1

2 DOOR
PART NUMBER
2941
60048
N67
2941
60048
N67
2942
60048
N67
2949
60049
N67
FKWTJ01
FKWTJ02
OMEWTJPR10
JWGK01
JWGK02
JWGK03
FK16

UNLIMITED

QTY

UNIT
PRICE $

2
1

2
1

2
1

2
1

PART NUMBER

QTY

2949
60049
N67
2949
60049
N67
2996
60049
N67
FKWTJ01
FKWTJ02
OMEWTJPR10
JWGK01
JWGK02
JWGK03
FK16

UNIT
PRICE $

2
6

1
2

1
2
2

3
3

REMARKS:
1

For ride height and trim adjustment use - Front: OMEJGF10

Rear: OMEWTJPR10

FKWTJ01 Panhard Rod Extension Bracket Kit fitment to right hand drive or FKWTJ02 to left hand drive Models is
mandatory to ensure correct rear axle tracking.

A Gear Box Packer Kit is mandatory fitment to prevent driveline vibration.


JWGK01 suits all Models to 2003.
JWGK02 suits manual Models from 2003.
JWGK03 suits auto Models from 2003.

FK16: Mandatory fitment 20mm Bump Stop Spacer Kit to prevent coil springs becoming solid on full
compression.

OMESD40 only suitable for fitment to left hand drive Models.

To achieve optimal vehicle balance front to rear when Rear Spring 2949 is fitted, it is recommended that
only 60047 is fitted to the front.

When existing stock of N66C is exhausted no further product will be available.

PAGE 20

CHRYSLER JEEP
JEEP WRANGLER YJ 1986 - 1996

FRONT
Estimated Lift: 40 - 50mm
SPRING: TO 35 KGS: 50mm
NITROCHARGER SPORT
NITROCHARGER
SPRING: TO 95 KGS: 40mm
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
GEAR BOX PACKER KIT
GREASABLE SHACKLE KIT
STEERING DAMPER
EXTRA LEAF
CENTRE BOLT

PETROL ENGINE
PART NUMBER
CS014F
60098
N33
CS014F
60098
N33
OMESB57
OMESB87
JWGK01
OMEGS11
OMESD40
D23XL
UCB09

REAR
Estimated Lift: 50mm
SPRING: HARD TOP
MEDIUM LOAD TO 200 KGS
NITROCHARGER SPORT
SPRING: SOFT TOP
LIGHT LOAD
NITROCHARGER SPORT
SPRING BUSH KIT
GREASABLE SHACKLE KIT
EXTRA LEAF
CENTRE BOLT

QTY

UNIT
PRICE $

1
2

ALL MODELS
PART NUMBER

QTY

CS036R

UNIT
PRICE $

60099
CS037R
60099
OMESB57
OMESB87
OMEGS11
D24XL
UCB09

1
2

REMARKS:
1

JWGK01 fitment reduces driveline vibration.

Use OMESB57 with original shackles. OMESB87 with OMEGS11 greasable shackles.

OMESD40 will only fit left hand drive Models.

PAGE 21

CHRYSLER JEEP
JEEP WRANGLER JK 2 DOOR 2006 ON

FRONT
Estimated Lift: 50 mm
SPRING: NO BAR
SPRING: BAR
SPRING: BAR AND WINCH
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
STEERING STABILIZER MOUNT KIT - LEFT
HAND DRIVE
TRIM PACKER
CASTER CORRECTION KIT

REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
SPRING: CONSTANT 150 KGS
NITROCHARGER SPORT
NITROCHARGER
PANHARD ROD EXTENSION BKT KIT LEFT HAND DRIVE
PANHARD ROD EXTENSION BKT KIT RIGHT HAND DRIVE
TRIM PACKER

SUSPENSION
KIT
Estimated Lift: 100mm
4" COMPLETE LIFT KIT

V6 PETROL ENGINE
PART NUMBER
2626
2615
2627
60066
N196
OMESD48

QTY

1
1
1

2.8 DIESEL ENGINE

UNIT
PRICE $

2627
2616
2628
60066
N196
OMESD48

1
1
2

FK50

OMEJKPF10
FK53

PART NUMBER

1
1
1

QTY

UNIT
PRICE $

1
1
2

FK50

OMEJKPF10
FK53

ALL MODELS
PART NUMBER

QTY

2630
2617
60067
N198

1
1

1
1

UNIT
PRICE $

FK37

FK39

1
OMEJKPR10

PETROL ENGINE RHD


MODELS
PART NUMBER
OMEJK4RHD

QTY
5

UNIT
PRICE $

PETROL ENGINE LHD


MODELS
PART NUMBER

QTY

OMEJK4

UNIT
PRICE $

Estimated Lift: 100mm

DIESEL ENGINE RHD MODELS DIESEL ENGINE LHD MODELS

4" COMPLETE LIFT KIT

OMEJK4RHDD

OMEJK4D

REMARKS:
1

For trim adjustment use - Front: OMEJKPF10 Rear: OMEJKPR10. Do not fit more than 1 packer per coil spring.

Fitment of Panhard Rod Extension Bracket Kit is not mandatory, but fitment will improve the ride feel by locating
the panhard rod to its original position.

FK50 is a mandatory fitment for 2006 To 2008 Models when fitting OMESD48. Left hand drive only.

2012 Models with 3.6L engine will require exhaust or driveshaft modification to avoid contact of driveshaft and exhaust
at full droop. When fitting larger than original diameter tyres, it is a requirement to fit aftermarket wheels (rims) that
have a greater offset (less backspacing) to ensure that sufficient clearance is given between the tyre to sway bar, sway
bar links and control arms.

Kit includes: 2 x Front Shocks, 2 x Rear Shocks, 1 x (pair) Front Coils, 1 x (pair) Rear Coils, 1 x Steering Damper, 1 x
Front Forged Panhard, 1 x Bump Stop Kit, 1 x Brake Line Relocation Kit, 1 x Rear Panhard Bracket Kit, 1 x Sway Bar
Link Dis-connect Kit, 1 x Caster & Driveline Kit, 1 x Steering Damper Relocation Kit for LHD Models (not applicable for
RHD Models), 2 x Front Trim Packer, 2 x Rear Trim Packer, 1 x Display Carton.
See Page 24 for kit breakdown.

FK53 Caster Kit will increase caster angle by 2o. Check manufacturer's specification if Caster Kit is required.

PAGE 22

CHRYSLER JEEP
JEEP WRANGLER JK UNLIMITED 2006 ON

FRONT
Estimated Lift: 50 mm
SPRING: NO BAR
SPRING: BAR
SPRING: BAR AND WINCH
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
STEERING STABILIZER MOUNT KIT - LEFT
HAND DRIVE
TRIM PACKER
CASTER CORRECTION KIT

REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
SPRING: CONSTANT 150KGS
SPRING: CONSTANT 300KGS
NITROCHARGER SPORT
NITROCHARGER
PANHARD ROD EXTENSION BKT KIT LEFT HAND DRIVE
PANHARD ROD EXTENSION BKT KIT RIGHT HAND DRIVE
TRIM PACKER

SUSPENSION
KIT
Estimated Lift: 100mm
4" COMPLETE LIFT KIT

V6 PETROL ENGINE
PART NUMBER
2627
2616
2628
60066
N196
OMESD48

QTY

1
1
1

2.8 DIESEL ENGINE

UNIT
PRICE $

2628
2619
2629
60066
N196
OMESD48

1
1
2

FK50

OMEJKPF10
FK53

PART NUMBER

1
1
1

QTY

UNIT
PRICE $

1
1
2

FK50

OMEJKPF10
FK53

ALL MODELS
PART NUMBER
2617
2618
2620
60067
N198

QTY

1
1
1

UNIT
PRICE $

1
1
2

FK37

FK39

OMEJKPR10

PETROL ENGINE RHD


MODELS
PART NUMBER
OMEJK4RHD

QTY
5

UNIT
PRICE $

PETROL ENGINE LHD


MODELS
PART NUMBER

QTY

OMEJK4

UNIT
PRICE $

Estimated Lift: 100mm

DIESEL ENGINE RHD MODELS DIESEL ENGINE LHD MODELS

4" COMPLETE LIFT KIT

OMEJK4RHDD

OMEJK4D

REMARKS:
1

For trim adjustment use - Front: OMEJKPF10 Rear: OMEJKPR10


Do not fit more than 1 packer per coil spring.

Fitment of Panhard Rod Extension Bracket Kit is not mandatory, but fitment will improve the ride feel by locating
the panhard rod to its original position.

FK50 is a mandatory fitment for 2006 To 2008 Models when fitting OMESD48. Left hand drive only.

2012 Models with 3.6L engine will require exhaust or driveshaft modification to avoid contact of driveshaft and exhaust
at full droop. When fitting larger than original diameter tyres, it is a requirement to fit aftermarket wheels (rims) that
have a greater offset (less backspacing) to ensure that sufficient clearance is given between the tyre to sway bar, sway
bar links and control arms.

Kit includes: 2 x Front Shocks, 2 x Rear Shocks, 1 x (pair) Front Coils, 1 x (pair) Rear Coils, 1 x Steering Damper, 1 x
Front Forged Panhard, 1 x Bump Stop Kit, 1 x Brake Line Relocation Kit, 1 x Rear Panhard Bracket Kit, 1 x Sway Bar
Link Dis-connect Kit, 1 x Caster & Driveline Kit, 1 x Steering Damper Relocation Kit for LHD Models (not applicable for
RHD Models), 2 x Front Trim Packer, 2 x Rear Trim Packer, 1 x Display Carton.
See page 24 for kit breakdown.

FK53 Caster Kit will increase caster angel by 2o. Check manufacturer's specification if Caster Kit is required.

PAGE 23

OFF ROAD USE ONLY - CHRYSLER


JEEP WRANGLER JK

COMPLETE KIT
100mm (4 Inch) LIFT KIT
100mm (4 Inch) LIFT KIT
100mm (4 Inch) LIFT KIT
100mm (4 Inch) LIFT KIT

PART NUMBER QTY


OMEJK4RHD
OMEJK4
OMEJK4RHDD
OMEJK4D

UNIT
COMMENTS
PRICE $
PETROL ENGINE RHD MODELS
PETROL ENGINE LHD MODELS
DIESEL ENGINE RHD MODELS
DIESEL ENGINE LHD MODELS

1
1
1
1

KIT INCLUDES:
2 x Front Shocks, 2 x Rear Shocks, 1 x (pair) Front Coils, 1 x (pair) Rear Coils, 1 x Steering Damper, 1 x Front Forged
Panhard, 1 x Bump Stop Kit, 1 x Brakeline Relocation Kit, 1 x Rear Panhard Bracket Kit, 1 x Sway Bar Link Dis-Connect Kit, 1
x Caster & Driveline Kit, 2 x Front Trim Packer, 2 x Rear Trim Packer, 1 x Display Carton.

FRONT

PART NUMBER QTY

COILS
100mm LIFT - PETROL
100mm LIFT - DIESEL

SHOCKS
NITROCHARGER SPORT - MID LENGTH
NITROCHARGER SPORT - LONG

BP-51 SELECTION
SHOCK: JEEP 4+ FRONT 633
SHOCK: JEEP 4+ FRONT 683
KIT: JEEP 4+ FRONT

STEERING DAMPER
STABILISER

COMPONENTS
CASTER KIT
CASTER & DRIVELINE KIT
BRAKELINE RELOCATION KIT (F&R)
SWAY BAR LINK DIS-CONNECT KIT (F&R)
FRONT SWAY BAR LINK
ADJUSTABLE FRONT PANHARD ROD
BUMP STOP EXTENSION KIT (F&R)
TRIM PACKER

REAR
COILS
100mm LIFT - MEDIUM
100mm LIFT - CONSTANT 300KG

SHOCKS
NITROCHARGER SPORT - LONG

BP-51 SELECTION
SHOCK: JEEP 4+ REAR 685
KIT: JEEP 4+ REAR

COMPONENTS
REAR PANHARD BRACKET KIT
REAR SWAY BAR LINK
TRIM PACKER

2642
3047

1
1

60066M
60066L

2
2

BP5160021
BP5160022
VM80010014

2
2
1

OMESD48

FK53
FK49
FK46
FK48
3460010
PANRJK001
FK40
OMEJKPF10

1
1
1
1
2
1
1

UNIT
PRICE $

For OMEJK4 Kits


Longer Travel Front Shock

Front caster only, increases caster by 2o


Adjust front caster and rear pinion angle
Suits 100mm lift
Link only, suits 100mm lift
Forged
10mm

UNIT
PART NUMBER QTY
PRICE $
2643
3046

1
1

60067L

BP5160023
VM80010015

2
1

FK47
FK47RHD
3460011
OMEJKPR10

COMMENTS

COMMENTS

LHD, suits 100mm lift


RHD, suits 100mm lift
Link only, suits 100mm lift

1
2

Notification: Modifications for off - road use only


The products listed in this selection chart are deemed by Old Man Emu to be suitable for off road use and their legality for
public road use should be certified by the relevant Registration Authority. An Off Road Use Only Disclaimer must be signed by
the customer.
Modifications and replacement of other associated components will be required.
Lift increase is approximate and will depend on vehicle weights.
Warranty Implications
The fitter selling these shocks must inform the customer there is no warranty due to the severe nature of competition
racing. The fitter must also note on the customer's receipt "racing application no warranty applies". This will prevent
any future misunderstanding.
2012 Models with 3.6L engine will require exhaust or driveshaft modification to avoid contact of driveshaft and exhaust at full
droop.
When fitting larger than original diameter tyres, it is a requirement to fit aftermarket wheels (rims) that have a greater offset
(less backspacing) to ensure that sufficient clearance is given between the tyre to sway bar, sway bar links and control arms.

PAGE 24

FORD
RANGER PX 2011 ON

FRONT
Estimated Lift: 50mm
SPRING: No Bar
STRUT SPORT
SPRING: Bar
STRUT SPORT
SPRING: Bar / Winch
STRUT SPORT
SPRING: No Bar: 30mm LIFT
STRUT SPORT
BP51 SELECTION
BP-51 COIL OVER FRONT RH
BP-51 COIL OVER FRONT LH
BP FIT KIT FRONT
TRIM PACKER
UPPER STRUT BUSHES
STRUT TOP HAT KIT

REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 300 KGS
NITROCHARGER SPORT
SPRING: CONSTANT 600 KGS
NITROCHARGER SPORT
BP-51 SELECTION
BP-51 SHOCK REAR RH
BP-51 SHOCK REAR LH
BP FIT KIT REAR
GREASABLE SHACKLE KIT
SPRING BUSH KIT

U BOLTS
DRIVELINE SPACER KIT
EXTRA LEAF

DIESEL ENGINE
PART NUMBER
2997
90019
2998
*90020 / 90019
2999
90020
3048
90019
BP5190005R
BP5190005L
VM80010011
FK56
OME3135
OMETH006

QTY
1

UNIT
PRICE $

1
2
1
2
1
2
1
2

1
2
1

ALL MODELS
PART NUMBER
EL049R
*60101 / 60023
EL068R
*60102 / 60101
EL069R
60102
BP5160004R
BP5160004L
VM80010012
OMEGS20
OMESB102
OMESB103
OMEU66
OMEU66A
OMEU66B
FK57
EL34XL

QTY
4

UNIT
PRICE $

2
2
2

1
1
3

4
4
5
6

2
4
1
2

REMARKS:
1

No top mounting bushes supplied, use OME3135. OE bushes may be re-used if in good condition.

Trim Packer FK56 provides 10mm lift at the wheel.

OMESB102 suits OE Shackle.


OMESB103 Bush Kit suits OME Greasable Shackle OMEGS20.

Use OMEU66 when fitting EL049R.


Use OMEU66A when fitting EL068R and EL069R.
Use OMEU66B when fitting EL069R with EL34XL.

Fitment of Driveline Spacer Kit FK57 is recommended to re-align driveline.

EL34XL will give approximately 30mm extra lift or increase loading capacity at design height by approximately 300kg.

Strut Top Hat Kit may be required if original equipment is worn.

PAGE 25

FORD
RANGER PJ/PK 12/2006 TO 2011 ALL MODELS
(NOT USA MANUFACTURED MODEL)

FRONT

PETROL & DIESEL ENGINES


PART NUMBER

TORSION BARS: OVER 60 KGS


TORSION BARS
NITROCHARGER SPORT
NITROCHARGER
FITTING KIT

REAR
Estimated Lift: 20mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
GREASABLE SHACKLE KIT
U BOLTS
SPRING BUSH KIT
EXTRA LEAF
CENTRE BOLT

303013
303005
60022
*N194 / N187
FK22

QTY
4

1
5

REMARKS:

UNIT Note: Some South American Models,


PRICE $ built in Argentina, use torsion bars with
hexagonal ends. Above OME
suspension is not suitable for these
Models.
1

FK22 Front Shock Absorber Upper


Mount Support Bracket Kit is a
mandatory fitment.

UNIT 2
PRICE $

Include tray weight in constant load


calculation.

ALL MODELS
PART NUMBER
CS056R

QTY

60023
EL049R

Use OMEU66 when fitting CS056R and


EL049R. Use OMEU66A when fitting
CS060R.

For Models with 2.5TD engine measure


length of Torsion Bar to determine correct
fitment.

2
2

60023
CS060R 2
*60102 / 60023

OMEGS18
OMEU66
OMEU66A

2
5

1
3

OMESB97
D34XL / EL34XL

UCB19

303005 - 925mm.
303013 - 1024mm.
When remaining stock of N187 is
exhausted no further product will be
available.
D34XL and UCB19 suits CS056R and
CS060R.
EL34XL suits EL049R.

COURIER/RANGER 1 TONNE
1985 - 2005 ALL MODELS (NOT USA MANUFACTURED MODEL)

FRONT
TORSION BARS: OVER 60 KGS
NITROCHARGER SPORT
NITROCHARGER
FITTING KIT

REAR
Estimated Lift: 20mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
U BOLTS
GREASABLE SHACKLE KIT
SPRING BUSH KIT
EXTRA LEAF
CENTRE BOLT

PETROL & DIESEL ENGINES


PART NUMBER

QTY

303005
60022
N51
FK22

1
1
3
1

UNIT
PRICE $

2
1

ALL MODELS
PART NUMBER
CS026R
60023
CS027R
60023
OMEU65
OMEGS18
OMESB82
D9XL
UCB17

QTY
2

REMARKS:

UNIT
PRICE $

FK22 Support Brackets must be


installed to upper front shock
mounting brackets on late 1996 On
Models manufactured in Thailand.

Include tray weight in constant load


calculation.

When remaing stock of N51 is


exhausted no further product will be
available.

2
2
4
1
2
2
2

PAGE 26

FORD
FORD EXPLORER 1996 - 2001 REAR LEAF SPRING MODELS

FRONT

V6 PETROL ENGINE
PART NUMBER

TORSION BARS
NITROCHARGER

N16

QTY

UNIT 1
PRICE $

Raise or lower front end clearance


and trim vehicle by adjusting front
torsion bars. Important: A minimum
of 60mm of droop must be
maintained.

OE spring bushes are required to fit


CS042R springs. D10XL extra leaf
should be fitted when a constant
200kg plus load is carried.

REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER
EXTRA LEAF
CENTRE BOLT

PART NUMBER
CS042R
N17
D10XL
UCB5

REMARKS:

QTY
2

UNIT
PRICE $

2
2

FORD F250 & F350 2011 ON

FRONT
Estimated Lift: 45mm
(2 inch)
SPRING: 45MM
NITROCHARGER SPORT
CASTER CORRECTION KIT

FRONT
Estimated Lift: 75 - 100mm
(3 inch to 4 inch)
SPRING: 75MM
NITROCHARGER SPORT
SPRING: 100MM
NITROCHARGER SPORT
PANHARD BRACKET
RADIUS ARM DROP BRACKET KIT
BRAKELINE BRACKET KIT
SWAYBAR BRACKET KIT
BUMP SPACER KIT
TRIM PACKET (10mm)

REAR
Estimated Lift: 75mm
(3 inch)
SPRING: MEDIUM LOAD
SPRING: CONSTANT 450 KGS
NITROCHARGER SPORT
SPRING BUSH KIT
U BOLTS - NO OVERLOAD LEAF
U BOLTS - WITH OVERLOAD LEAF
EXTRA LEAF
CENTRE BOLT- OVERLOAD ONLY

DIESEL ENGINE
PART NUMBER

QTY

2768
60123
FK81

1
2
1

REMARKS:

UNIT 1
PRICE $

DIESEL ENGINE
PART NUMBER
3075
60121
3076
60121
FK69
FK70
FK71
FK72
FK73
FK74

QTY
1
2
1
2

UNIT
PRICE $

- FK72 Swaybar Kit to lower the front


swaybar
- FK70 Radius Arm Drop Bracket Kit,
if not fitted you may over stretch the
front brakelines

1
3

When bull bar and / or winch are fitted


use FK74 on both coils to restore
nominal lift height.

Where the OE rear leaf spring has an


overload leaf fitted, this overload leaf
is to be fitted to the OME leaf, EL077R
is to have its centre bolt replaced with
a longer bolt UCB21 and OE spacer
blocks are to be reused.

Use OMEU77 when fitting to a vehicle


without an overload leaf.
Use OMEU78 when fitting to a vehicle
with an overload leaf.

Fitment of a FK81 Caster Correction


Kit will provide approximately 3.5 to
4.0 degrees of extra caster. It is
advisable to have a front end
alignment carried out to determine if a
FK81 kit is required.

ALL MODELS
QTY

EL077R
4
EL077R + EL40XL
60122
OMESB109
OMEU77
5
OMEU78
EL40XL
UCB21
4

2
2+2
2
2

OME front shock 60121 is not suitable


as an OE replacement. When fitting
our longer OME shock 60121 you
must fit:
- FK71 Brakeline Kit to extend / drop
the brakelines

1
2
1
2

PART NUMBER

When fitting either 3075 or 3076 it is


mandatory to fit Bump Spacer Kit
FK73 to prevent the coil from being
over stressed.

UNIT
PRICE $

4
2

PAGE 27

FORD
FORD F250 & F350 2008 - 2010

FRONT
Estimated Lift: 45mm
(2 inch)
SPRING: 45MM
NITROCHARGER SPORT
CASTER CORRECTION KIT

FRONT
Estimated Lift: 75 - 100mm
(3 inch to 4 inch)
SPRING: 75MM
NITROCHARGER SPORT
SPRING: 100MM
NITROCHARGER SPORT
PANHARD BRACKET
RADIUS ARM DROP BRACKET KIT
BRAKELINE BRACKET KIT
SWAYBAR BRACKET KIT
BUMP SPACER KIT
TRIM PACKET (10mm)

REAR
Estimated Lift: 75mm
(3 inch)
SPRING: MEDIUM LOAD
SPRING: CONSTANT 450 KGS
NITROCHARGER SPORT
SPRING BUSH KIT
U BOLTS - NO OVERLOAD LEAF
U BOLTS - WITH OVERLOAD LEAF
EXTRA LEAF
CENTRE BOLT

DIESEL ENGINE
PART NUMBER

QTY

2768
60123
FK81

1
2
1

UNIT
PRICE $

DIESEL ENGINE
PART NUMBER
3075
60121
3076
60121
FK69
FK80
FK71
FK72
FK73
FK74

QTY
1
2

1
2

UNIT
PRICE $

1
2
1
2

ALL MODELS
PART NUMBER

QTY

EL077R
4
EL077R + EL40XL
60122
OMESB109
OMEU79
5
OMEU80
EL40XL
UCB21
4

2
2+2
2
2

UNIT
PRICE $

4
2

REMARKS:
1

When fitting either 3075 or 3076 it is mandatory to fit Bump Spacer Kit FK73 to prevent the coil from being over stressed.

OME front shock 60121 is not suitable as an OE replacement. When fitting our longer OME shock 60121 you must fit:
- FK71 Brakeline Kit to extend / drop the brakelines
- FK72 Swaybar Kit to lower the front swaybar
- FK80 Radius Arm Drop Bracket Kit, if not fitted you may over stretch the front brakelines

When bull bar and / or winch are fitted use FK74 on both coils to restore nominal lift height.

Where the OE rear leaf spring has an overload leaf fitted, this overload leaf is to be fitted to the OME leaf, EL077R is to
have its centre bolt replaced with a longer bolt UCB21 and OE spacer blocks are to be reused.

Use OMEU79 when fitting to a vehicle without an overload leaf.


Use OMEU80 when fitting to a vehicle with an overload leaf.

Fitment of a FK81 Caster Correction Kit will provide approximately 3.5 to 4.0 degrees of extra caster. It is advisable to
have a front end alignment carried out to determine if a FK81 kit is required.

PAGE 28

PAGE7

OME INT NO.30 AUG 2015

FORD
FORD F250 & F350 2005 - 2008 ALL MODELS

FRONT
Estimated Lift: 45mm
SPRING: TO 100 KGS
NITROCHARGER
CASTER CORRECTION KIT

REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
THIRD STAGE
SPRING:CONSTANT 600+KGS
XL LEAF
CENTRE BOLT
NITROCHARGER
U BOLTS - NO OVERLOAD LEAF
U BOLTS - WITH OVERLOAD LEAF
FITTING KIT
SPACER KIT

V8 DIESEL: COIL SPRING


PART NUMBER

QTY

2768
N195
FK36

1
2
1

UNIT
PRICE $

ALL MODELS LEAF SPRING


PART NUMBER
CS048R
TSXL01
CS048R
D27XL
UCB10
N179
OMEU68
OMEU67
FK31
FK35
OMESK1

QTY
1
1

UNIT
PRICE $

1
2
1

1
3

4
1

REMARKS:
1

Springs are supplied with bushes fitted. Where the OE spring has an overload leaf fitted, it must be replaced with a
TSXL01 and the CS048R original centre bolt replaced by a UCB10, the original spacing block must also be re-fitted using
U Bolts OMEU67.

To maintain 50mm lift for loads over constant 600 KGS and add D27XL Extra Leaf.

Fitment of Driveline Spacer Kit FK31 for Crew Cab or FK35 for Xtra Cab is recommended to reduce possible driveline
vibration. If required, additional spacing down of the centre bearing can be achieved by using an OMESK1 Spacer Kit.

Fitment of a FK36 Caster Correction Kit will provide approximately 3.5 to 4.0 degrees of extra caster. It is advisable to
have a Front End Alignment carried out to determine if an FK36 kit is required.

PAGE 29

FORD
FORD F250 & F350 1999 - 2004 ALL MODELS

FRONT
Estimated Lift: 50mm
SPRING: TO 150 KGS
NITROCHARGER
ADJUSTABLE PANHARD ROD
U BOLTS - USA MODELS
U BOLTS - BRAZIL MODELS

REAR
Estimated Lift: 50mm
SPRING: TO 600 KGS
THIRD STAGE
NITROCHARGER - SINGLE FITMENT
NITROCHARGER - DUAL FITMENT
SPRING: CONSTANT 600 KGS
XL LEAF
THIRD STAGE
NITROCHARGER - SINGLE FITMENT
NITROCHARGER - DUAL FITMENT
U BOLTS
CENTRE BOLT
FITTING KIT
STONE GUARD KIT

F250 PETROL & DIESEL


PART NUMBER
CS018F
N178
APRF250
OMEU69
OMEU69A
OMEU70
OMEU70A

QTY
6

UNIT
PRICE $

F350 PETROL & DIESEL


PART NUMBER
CS018F
N178
APRF250

2
1

QTY
6

2
1

OMEU69
2

QTY

CS048R
N179
N179 + N180
CS048R
D27XL
N179
N179 + N180
OMEU68
UCB10
FK31
FK35
OME660

2
3

F250 ALL MODELS


PART NUMBER

UNIT
PRICE $

UNIT
PRICE $

2
2+2
2
2
2
2+2
4
2
1

F350 ALL MODELS


PART NUMBER
CS048R
TSXL01
N179
CS048R
D27XL
TSXL01
N179
OMEU67
UCB10
FK31
FK35
OME660

QTY
5
5

5
3

UNIT
PRICE $

2
2
2
2
2
2
2
4
2

REMARKS:
1

APRF250 Adjustable Panhard Rod must be fitted to allow original axle location to be restored, bushes are
supplied in rod.

For Models with dual shock fitment N179 must be fitted rear of the axle, as it is longer than the N180.
OME660 Stone Shields are also a recommended fitment to the rear shocks.

To help maintain 50mm lift, add one D27XL Extra Leaf for every 400kgs carried over 600kgs.

Fitment of FK31 to Crew Cab or FK35 to Xtra Cab Models is recommended to reduce possible driveline vibration.

As the CS048R has a different spring camber, compared to the original spring, the overload leaf must be
replaced with a TSXL01. The Original spacing block must be refitted. Springs are supplied with bushing.

Springs are supplied with bushing.

PAGE 30

HOLDEN / ISUZU / GM
JACKAROO/TROOPER & MONTEREY 3/2001 - 2004
SWB & LWB

FRONT
PART NUMBER
TORSION BARS
NITROCHARGER SPORT
NITROCHARGER

60031
N65

QTY

UNIT
PRICE $

REAR
Estimated Lift: 20mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 100 KGS
NITROCHARGER SPORT

PART NUMBER
2919
60074
2929
60074

QTY
2

UNIT
PRICE $

1
2
1
2

REMARKS:
1

Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
Important: A minimum of 60mm of droop must be maintained.

Coil must be installed with progressive rate to the top.

JACKAROO/TROOPER & MONTEREY 1992 - 2/2001


SWB & LWB

FRONT
PART NUMBER
TORSION BARS
NITROCHARGER SPORT
NITROCHARGER

60031
N65

QTY

UNIT
PRICE $

REAR
Estimated Lift: 25mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 100 KGS
NITROCHARGER SPORT

PART NUMBER
2912
60074
2919
60074

QTY
2

UNIT
PRICE $

1
2
1
2

REMARKS:
1

Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
Important: A minimum of 60mm of droop must be maintained.

Coil must be installed with progressive rate to the top.

When remaining stock of N26F is exhausted no further product will be available.

PAGE 31

HOLDEN / ISUZU / GM
JACKAROO/ISUZU TROOPER 1982 - 3/1992 ALL MODELS

FRONT
PART NUMBER
TORSION BARS: OVER 50 KGS
NITROCHARGER SPORT
NITROCHARGER

REAR
Estimated Lift: 20mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KITS
U BOLTS
ANTI INVERSION KIT
GREASABLE SHACKLE KIT
EXTRA LEAF
CENTRE BOLT

303004
60031
N65

QTY
1

UNIT
PRICE $

1
2

ALL MODELS
PART NUMBER
CS028R
60009
60032
*N42 / N89
CS029R
*60063 / 60009
*60064 / 60032
N42
OMESB80
OMEU59A
FK14
OMEGS13
D19XL
UCB16

QTY

UNIT
PRICE $

2
4
1
2

REMARKS:
1

Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
Torsion Bar 303004 suit Models from 8/88 To 3/92 only.
Important: A minimum of 60mm of droop must be maintained.

60009 / 60063: Suits 11/'86 To 3/'92 Models and requires OMEB11 Bush Kit to convert lower bush
from 19mm to 16mm ID.
60064 / 60032 / N42 / N89: Suits Models '82 To 10/'86 (no bush kit required).

Where the OE spring has 4 leaves OMEU59A U Bolts are required.

FK14 Anti Inversion Kit must be fitted if greasable shackles are not fitted.

GM FRONTERA 5 DOOR 1999 - 6/2003 (USA - ISUZU RODEO WAGON)

FRONT
PART NUMBER
TORSION BARS
NITROCHARGER SPORT
NITROCHARGER

REAR
Estimated Lift: 20mm
SPRING: MEDIUM LOAD
NITROCHARGER

60031
N65

QTY

UNIT
PRICE $

ALL MODELS
PART NUMBER

QTY

2913
N102

1
2

UNIT
PRICE $

PAGE 32

HOLDEN / ISUZU / GM
GM FRONTERA 1995 - 1998 (USA - ISUZU RODEO WAGON)
2 & 4 DOOR UT MODELS

FRONT
PART NUMBER
TORSION BARS
NITROCHARGER SPORT
NITROCHARGER

REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT

60031
N65

QTY

UNIT
PRICE $

ALL MODELS
PART NUMBER

QTY

2912
60074

1
2

UNIT
PRICE $

MU-X / COLORADO 7 2013 ON ALL MODELS

FRONT
Estimated Lift: 30mm
SPRING: No Bar
STRUT - SPORT
SPRING: Bar
STRUT - SPORT
SPRING: Bar / Winch
STRUT - SPORT
TRIM PACKER
UPPER STRUT BUSHES
COIL ISOLATER
STRUT TOP HAT KIT

REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT

DIESEL ENGINE
PART NUMBER
3057
90022
2883
*90023 / 90022
2069
90023
OME95PF5
OME3134
OMESB3014
OMETH004

QTY

UNIT
PRICE $

1
2
1
2
1
2

1
2
3

MU-X

COLORADO 7

PART NUMBER

QTY

3088
60130
3089
*60131 / 60130
3090
60131

1
2

UNIT
PRICE $

1
2
1
2

PART NUMBER
3091
60130
3092
*60131 / 60130
3093
60131

QTY
4

1
2

1
2

1
2

UNIT
PRICE $

REMARKS:
1

No top mounting bushes supplied, use OME3134. OE bushes may be re-used if in good condition.

On Colorado 7, due to a change in top hat, OMESB3014 will be required for fitment of OME coils. Not required for Isuzu MU-X.

Strut Top Hat Kit may be required if original equipment is worn.

60130 and 60131 cannot be used as a shock only OE replacement on Colorado 7 models. Can be used as an OE
replacement for Isuzu MU-X.

PAGE 33

HOLDEN / ISUZU / GM
D-MAX 2012 ON ALL MODELS
COLORADO 2012 ON ALL MODELS

FRONT
Estimated Lift: 30mm
SPRING: No Bar
STRUT SPORT
SPRING: Bar
STRUT SPORT
SPRING: Bar / Winch
STRUT SPORT
TRIM PACKER
UPPER STRUT BUSHES
COIL ISOLATOR
STRUT TOP HAT KIT

REAR
Estimated Lift: 30mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 300 KGS
NITROCHARGER SPORT
SPRING: CONSTANT 600 KGS
NITROCHARGER SPORT
GREASABLE SHACKLE KIT
SPRING BUSH KIT
U BOLTS
EXTRA LEAF
HANDBRAKE CABLE FIT KIT

DIESEL ENGINE
PART NUMBER
3057
90022
2883
*90023 / 90022
2869
90023
OME95PF5
OME3134
OMESB3014
OMETH004

REMARKS:

UNIT
QTY
PRICE $
1

1
2
1
2
1
2

No top mounting bushes supplied, use


OME3134. OE bushes may be reused if in good condition.

OMESB98 Bush Kit suits OME


Greasable Shackle, OMEGS14.
OMESB107 Bush Kit suits OE Shackle.

If fitting extra leaf to EL074R, use U


Bolt OMEU53B.

Handbrake Cable Fit Kit only required


for Isuzu DMAX cab chassis and LSM
Models.

Strut Top Hat Kit may be required if


original equipment is worn.

OMESB3014 will be required for


fitment of OME coils to Colorado
04/2013 On due to change in top hat.
Not Required for Isuzu DMAX.

6
5

ALL MODELS
PART NUMBER
EL072R
60116
EL073R
*60117 / 60116
EL074R
60117
OMEGS14
OMESB98
OMESB107
OMEU53A
EL39XL
FK66

QTY

UNIT
PRICE $

2
2
2
1
2

4
2
1

PAGE 34

HOLDEN / ISUZU / GM
D-MAX 2008 - 2011 ALL MODELS
COLORADO RC 2008 - 2011 ALL MODELS
RODEO RA 2003 - 2011 ALL MODELS (NOT USA MANUFACTURED MODEL)

FRONT

PETROL ENGINE
PART NUMBER

TORSION BARS - NO LOAD


NITROCHARGER SPORT
NITROCHARGER

REAR
Estimated Lift: 30 - 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 300 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
U BOLTS
CENTRE BOLT
ANTI INVERSION KIT
GREASABLE SHACKLE KIT
EXTRA LEAF

QTY

303012
60031

N65

DIESEL ENGINE
UNIT
PRICE $

PART NUMBER
303012
60031

1
2

N65

QTY
1

UNIT
PRICE $

1
2

ALL MODELS
PART NUMBER
CS062R
60032
*N42 / N89
CS063R
*60064 / 60032
N42
OMESB80
OMEU66
UCB15
FK26
OMEGS13
D26XL

QTY

UNIT
PRICE $

2
3

2
2
4
2
4

1
2

REMARKS:
1

Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop
must be maintained. It has been found, due to vehicle manufacturing tolerances, that in some cases front shock absorbers
may contact the steering arm when on full lock. Fitter should check for this and where required a small indentation should be
made to the body of the shock absorber. 303012 torsion bars have a lighter rate than OE and improve ride comfort for vehicles
with no front accessory weight. Due to their heavy rate, the OE torsion bars are suitable for vehicles with front accessory
weight.

Fit N65 when installing 303012 torsion bar to petrol Models and N1505 for OE torsion bars.

Include tray weight in constant load calculation. CS062R and CS063R can be installed to high height 4x2 Models. OME leaf
does not fit low height 4x2 Models.

FK26 only needed if not fitting Greasable Shackle Kit.

When remaining stock of N150 is exhausted no further product will be available.

PAGE 35

HOLDEN / ISUZU / GM
RODEO/D-MAX TO 2003 ALL MODELS (NOT USA MANUFACTURED MODEL)

FRONT

PETROL & DIESEL ENGINES


PART NUMBER

TORSION BARS: OVER 50 KGS


NITROCHARGER SPORT
NITROCHARGER

REAR
Estimated Lift: 20mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
ANTI INVERSION KIT
GREASABLE SHACKLE KIT
U BOLTS
EXTRA LEAF
CENTRE BOLT

303004
60031
N65

QTY
1

UNIT
PRICE $

ALL MODELS
PART NUMBER
CS028R
60032
*N42 / N89
CS029R
60064
N42
OMESB80
FK14
OMEGS13
OMEU59A
D19XL
UCB16

REMARKS:
1

Raise or lower front end clearance and


trim vehicle by adjusting front torsion
bars. Important: A minimum of 60mm of
droop must be maintained.

Include tray weight in constant load


calculation.

FK14 must be fitted if OMEGS13


greasable shackles are not fitted.

Vehicles with 4 Leaf OE spring stack


require U bolts OMEU59A.

QTY

UNIT
PRICE $

2
2

4
2

DROVER ALL MODELS (NOT USA MANUFACTURED MODEL)

FRONT
Estimated Lift: 40mm
SPRING: TO 35 KGS
NITROCHARGER
SPRING: 35 TO 75 KGS
NITROCHARGER
SPRING BUSH KIT
U BOLTS
FITTING KIT
TRIM PACKER
STEERING DAMPER
EXTRA LEAF
CENTRE BOLT

REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER
SPRING: CONSTANT 100 KGS
NITROCHARGER
SPRING BUSH KIT
U BOLTS
TRIM PACKER
EXTRA LEAF
CENTRE BOLT

REMARKS:

PART NUMBER

QTY

CS012FA / B
OME015
CS013FA / B
OME015
OMESB19
OMEU61
OMEU62
FK06
TP05
OMESD30
D20XL
UCB7

1+1
2
1+1
2
2
4
1

UNIT
PRICE $

One only OMEU62 may be required


on the right hand side inner, on some
Models.

1
1
2

ALL MODELS
PART NUMBER
CS038R
OME013
CS039R
OME013
OMESB19
OMEU61
TP05
D21XL
UCB7

QTY

UNIT
PRICE $

2
2
2
4
2

PAGE 36

HUMMER
H3

FRONT
Estimated Lift: 20mm
TORSION BARS
NITROCHARGER SPORT

REAR
Estimated Lift: 20mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
EXTRA LEAF

ALL MODELS
PART NUMBER
303014
90001

QTY
1

UNIT
PRICE $

1
2

ALL MODELS
PART NUMBER
CS059R
60045
D36XL

QTY
2

UNIT
PRICE $

2
2

REMARKS:
1

Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
It is important that a minimum of 60mm droop is maintained to prevent topping out of the front shock absorbers.

Springs supplied with bushings.

PAGE 37

HYUNDAI
TERRACAN 2001 ON

FRONT
Estimated Lift: 10mm

PETROL & DIESEL ENGINE


PART NUMBER

QTY

60040

TORSION BARS
NITROCHARGER SPORT

REAR
Estimated Lift: 20mm

UNIT
PRICE $

ALL MODELS
PART NUMBER

QTY

2603
60060
2604
60060

1
2
1
2

SPRING: MEDIUM LOAD


NITROCHARGER SPORT
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT

UNIT
PRICE $

KIA
SORENTO BL TO 2009
Estimated Lift: 20mm
SPRING:
SPRING: 20 TO 60 KGS
STRUT

REAR
Estimated Lift: 30mm
SPRING: LIGHT LOAD
NITROCHARGER
SPRING: MEDIUM LOAD
NITROCHARGER

REMARKS:
OME661 Stone Guards are
recommended fitment to vehicles driven
UNIT
on dirt roads to prevent stone damage to
QTY
PRICE $
the shock absorbers.
1
2
1
N147S fits RHS, N148S fits LHS.
1+1
No top mounting bushes supplied, reuse OE bushes.

ALL MODELS

FRONT

PART NUMBER
2902
2601
N148S
LHS

N147S
RHS

LATE 2006 ON MODELS


PART NUMBER

QTY

2622
N205

MODELS 2003 TO LATE 2006

UNIT
PRICE $

PART NUMBER
2602
N149
2903
N149

1
2

QTY
1

UNIT
PRICE $

1
2
1
2

LADA
NIVA

FRONT

REMARKS:

Estimated Lift: 30mm

SPRING:
NITROCHARGER
TRIM PACKER

REAR
Estimated Lift: 30mm
SPRING: MEDIUM LOAD
NITROCHARGER

PART NUMBER
2791
NOT AVAILABLE
OMELNF10

QTY
1

UNIT
PRICE $

ALL MODELS
PART NUMBER

QTY

2792
NOT AVAILABLE

UNIT
PRICE $

PAGE 38

2010 On Models front lift less than


30mm.

LAND ROVER
DISCOVERY 3 2005 ON ALL COIL MODELS

FRONT
Estimated Lift: 50mm
SPRING:
SPRING: 100 KGS +
STRUT

REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
SPRING: CONSTANT 200 KGS
STRUT

PETROL & DIESEL ENGINES


PART NUMBER

QTY

2744
2745
USE OE

1
1

UNIT
PRICE $

ALL MODELS
PART NUMBER

QTY

2746
2743
USE OE

1
1

UNIT
PRICE $

REMARKS:
1

Coils are suitable to be used with original OE struts, OME will not be developing replacement struts.

DISCOVERY 1999 - 2004 ALL COIL SUSPENSION MODELS

FRONT
Estimated Lift: 40mm
SPRING: TO 20 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 21 TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
COIL PACKER

REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 100 KGS
NITROCHARGER SPORT
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
COIL PACKER

PETROL & DIESEL ENGINES


PART NUMBER
2776
60024
*N107 / N107C
2777
60024
*N107 / N107C
2779
60024
N107
OMESD02
OMELRCP2

QTY
1

3
1

3
1

UNIT
PRICE $

1
2
1
2
1
2
1

ALL MODELS
PART NUMBER

QTY

2781
60026
2762
60025
2763
60025
OMELRCP1

1
2
1
2
1
2

UNIT
PRICE $

REMARKS:
1

On 2003 Models lift will be between 25 to 35mm.

8mm Steel Coil Seat Packer, refer to fitting instructions supplied with packer.
Important: To prevent possible over stressing of the spring, only one packer can be fitted under each coil seat.

When remaining stock of N107 & N107C is exhausted no further product will be available.

PAGE 39

LAND ROVER
DISCOVERY TO 1998 & RANGE ROVER TO 5/19953

FRONT
Estimated Lift: To 40mm
SPRING: TO 20 KGS: 20mm
NITROCHARGER SPORT
NITROCHARGER
SPRING: TO 50 KGS: 30mm
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
CASTER KIT
COIL PACKER

PETROL ENGINES
PART NUMBER

QTY

2760
60037
*N115 / N45F
2761
60037
*N115 / N45F
2767
60037
N115
OMESD11
CALR1
CALR2
OMELRCP1

REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 100 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
COIL PACKER

UNIT
PRICE $

2
1

2
1

PART NUMBER
2751
60037
*N115 / N45F
2767
60037
N115
OMESD11
CALR1
CALR2
OMELRCP1

1
4

DIESEL ENGINES

QTY

1
4

2
1

2
1

ALL MODELS
PART NUMBER

QTY

2764
60038
2762
60039
N44
2763
60039
N44
OMELRCP1

1
2
1

UNIT
PRICE $

2
1
2
2

REMARKS:
1

CALR1 : Fits pre '86 Range Rover.


CALR2 : Fits post '86 Range Rover, all Discovery and Defender 130 Dual Cab Utility.
NB: Do not fit to automatic Range Rovers or Discovery due to possible vibration problems.

8mm Steel Coil Seat Packer, refer to fitting instructions supplied with packer.
Important: To prevent possible over stressing of the spring, only one packer can be fitted under each coil seat.

Not suitable for Models with air suspension.

When remaining stock of N45F is exhausted no further product will be available.

PAGE 40

UNIT
PRICE $

LAND ROVER
DEFENDER & COUNTY 110

FRONT
Estimated Lift: To 40mm
SPRING: TO 50 KGS: 30mm
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
CASTER KIT
COIL PACKER

FRONT
Estimated Lift: To 40mm
SPRING: TO 50 KGS: 30mm
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
CASTER KIT
COIL PACKER

REAR
Estimated Lift: To 55mm
SPRING: LIGHT LOAD: 25mm
NITROCHARGER SPORT
SPRING: CONSTANT 300 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 500 KGS
NITROCHARGER SPORT
NITROCHARGER
COIL PACKER

V8 PETROL ENGINES
PART NUMBER
2761
60037
N45F
2751
60037
N115
OMESD32
CALR1
CALR2
OMELRCP1

QTY
1
5
1

UNIT
PRICE $

PART NUMBER

2766
60037
*N115 / N45F
2766
60037
N115
OMESD32

CALR1

1
2
1
2

3.9 ISUZU DIESEL ENGINES

OMELRCP1

QTY
1
5
1

UNIT
PRICE $

1
2
1
2
1
1

2.5 DIESEL ENGINES


PART NUMBER

QTY

2751
60037
N45F
2767
60037
N115
OMESD32
CALR1
CALR2
OMELRCP1

1
5

UNIT
PRICE $

2
1
2
1

ALL MODELS
PART NUMBER
2752
60038
2755
60039
N44
2754
60039
N44
OMELRCP3

QTY
2

UNIT
PRICE $

1
2
1
2

1
2

REMARKS:
1

Caution: Due to altered gearbox mounts on Models after 1998 any lift above OE ride height may cause front
driveline vibration that can only be rectified by fitment of front double cardan joints.
Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if Caster Kit is required.
CALR1 suits 38mm wide control arms. CALR2 suits 44mm wide control arms.

2752 coil has a softer spring than OE coil. This is to provide improved ride quality with light loads only
OE springs are designated as medium load springs.

Original inner helper coil, where fitted, must be re-installed with OME Coils.

8mm Steel Coil Seat Packer, refer to selection chart supplied with packer.
Important: To prevent possible over stressing of the spring, only one packer can be fitted under each coil seat.

When remaining stock of N45F is exhausted no further product will be available.

PAGE 41

LAND ROVER
DEFENDER 110 LONG TRAVEL

FRONT
Estimated Lift: To 50mm
SPRING: NO BAR
NITROCHARGER SPORT
SPRING: BAR / BAR & WINCH
NITROCHARGER SPORT
STEERING DAMPER
CASTER KIT
COIL PACKER

REAR
Estimated Lift: To 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 300 KGS
NITROCHARGER SPORT
SPRING: CONSTANT 500 KGS
NITROCHARGER SPORT
REAR UPPER SHOCK MOUNT
COIL PACKER

FRONT & REAR

2.5L DIESEL ENGINES


PART NUMBER
3062
60018
3063
*60070 / 60018
OMESD32
CALR1
CALR2
OMELRCP1

QTY
1
2
1
2

1
2
1
2
1
1

ALL MODELS
PART NUMBER
3064
1
60018
3065
*60070 / 60018
3066
60070
FK64
OMELRCP3

QTY
5
2
1
2
1

UNIT
PRICE $

1
2
1
2
1
2
1

FITTING KITS
PART NUMBER

BUMP SPACER KIT


SWAY BAR SPACER KIT

UNIT
PRICE $

FK62
FK63

QTY
2

UNIT
PRICE $

REMARKS:
Caution: Front driveshaft MUST be replaced / modified with Double Cardan Joints and checked for Uni bind
with OME shocks installed at droop. FK62, FK63 & FK64 are mandatory fitment also.
1

When fitting coil springs recommended, you must use 60018 / 60070 shock absorbers to achieve minimum
down travel requirement.

When fitting 60018 / 60070 the following are mandatory requirements:


* Fit longer coils 3062 - 3066 for springs to remain trapped with shocks fully extended
* Fit FK62 to prevent shock damage
* Fit FK63 for front driveshaft clearance and rear extended travel
* Fit FK64 which replaces OE upper shock mount when fitting rear shocks
* Remove any inner helper coils already fitted

Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if Caster Kit is
required. CALR1 suits 38mm wide control arms. CALR2 suits 44mm wide control arms.

8mm Steel Coil Seat Packer, refer to selection chart supplied with packer.
Important: To prevent possible over stressing of the spring, only one packer can be fitted under each coil seat.

Important: 3064 has reduced spring rate from OE to provide improved ride quality for light loads.

PAGE 42

LAND ROVER
DEFENDER 130 MODEL

FRONT
Estimated Lift: 20mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
CASTER KIT
COIL PACKER

REAR
Estimated Lift: To 40mm
SPRING: LIGHT LOAD: 25mm
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
COIL PACKER

2.5 DIESEL ENGINE


PART NUMBER

QTY

2751
60037
*N115 / N45F
2767
60037
N115
OMESD32
CALR1
CALR2
OMELRCP1

1
5

UNIT
PRICE $

2
1
2

DIESEL ENGINE
PART NUMBER
2755
60039
N44
2754
60039
N44
OMELRCP3

QTY
2

5
4

UNIT
PRICE $

1
2
1
2

REMARKS:
1

Caution: Due to altered gearbox mounts on Models after 1998 any lift
above OE ride height will cause front driveline vibration that can only be
rectified by fitment of front double cardan joints.
Caster Kit will increase caster angle by 2o. Check manufacturer's
specifications to determine if Caster Kit is required. CALR1 suits 38mm wide
control arms. CALR2 suits 44mm wide control arms.

Important: 2755 has reduced spring rate from OE to provide improved ride
quality for light loads. Original inner helper coil, where fitted, must be reinstalled with OME coils.

8mm Steel Coil Seat Packer, refer to selection chart supplied with packer.
Important: To prevent possible overstressing of the spring, only one packer
can be fitted under each coil seat.

Original inner helper coil, where fitted, must be re-installed with OME coils.

When remaining stock of N45F is exhausted no further product will be


available.

PAGE 43

LAND ROVER
DEFENDER 130 LONG TRAVEL

FRONT
Estimated Lift: To 30mm
SPRING: NO BAR
NITROCHARGER SPORT
SPRING: BAR / BAR & WINCH
NITROCHARGER SPORT
STEERING DAMPER
CASTER KIT
COIL PACKER

REAR
Estimated Lift: To 40mm
SPRING: LIGHT LOAD 25mm
NITROCHARGER SPORT
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
REAR UPPER SHOCK MOUNT
COIL PACKER

FRONT & REAR

2.5L DIESEL ENGINES


PART NUMBER
3062
60018
3063
*60070 / 60018
OMESD32
CALR1
CALR2
OMELRCP1

QTY
1
2
1
2

1
2
1
2
1
1

ALL MODELS
PART NUMBER
3065
1
*60070 / 60018
3066
60070
FK64
OMELRCP3

QTY
5
2
1
2

UNIT
PRICE $

1
2
1
2
1

FITTING KITS
PART NUMBER

BUMP SPACER KIT


SWAY BAR SPACER KIT

UNIT
PRICE $

FK62
FK63

QTY
2

UNIT
PRICE $

REMARKS:
Caution: Front driveshaft MUST be replaced / modified with Double Cardan Joints and checked for Uni bind with
OME shocks installed at droop. FK62, FK63 & FK64 are mandatory fitment also.
1

When fitting coil springs recommended, it is mandatory use 60018 / 60070 shock absorbers to achieve minimum down
travel requirement.

When fitting 60018 / 60070 the following are mandatory requirements:


* Fit longer coils 3062 - 3066 for springs to remain trapped with shocks fully extended
* Fit FK62 to prevent shock damage
* Fit FK63 for front driveshaft clearance and rear extended
travel
* Fit FK64 which replaces OE upper shock mount when fitting rear shocks
* Remove any inner helper coils already
fitted
Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if Caster Kit is required.
CALR1 suits 38mm wide control arms. CALR2 suits 44mm wide control arms.

8mm Steel Coil Seat Packer, refer to selection chart supplied with packer.
Important: To prevent possible over stressing of the spring, only one packer can be fitted under each coil seat.

Important: 3065 has reduced spring rate from OE to provide improved ride quality for light loads.

PAGE 44

LAND ROVER
90 SERIES

FRONT
Estimated Lift: 30mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
CASTER KIT

REAR
Estimated Lift: 45 - 55mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER

PETROL ENGINE
PART NUMBER

QTY

2761
60037
N45F
2751
60037
N115
OMESD32
CALR1
CALR2

1
2

DIESEL ENGINE
UNIT
PRICE $

2
1
2

PART NUMBER

QTY

2751
60037
N115
2767
60037
N115
OMESD32
CALR1
CALR2

UNIT
PRICE $

2
1
2

ALL MODELS
PART NUMBER

QTY

2764
60038
2762
60039
N44

1
2
1

UNIT
PRICE $

REMARKS:
1

Caution: Due to altered gearbox mounts on Models after 1998 any lift above OE ride height may cause front
driveline vibration that can only be rectified by fitment of front double cardan joints.
Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if Caster Kit is required.
CALR1 suits 38mm wide control arms. CALR2 suits 44mm wide control arms.

When remaining stock of N45F is exhausted no further product will be available.

PAGE 45

MAZDA
BT-50 2011 ON

FRONT
Estimated Lift: 50mm
SPRING: No Bar
STRUT SPORT
SPRING: Bar
STRUT SPORT
SPRING: Bar / Winch
STRUT SPORT
TRIM PACKER
SPRING: No Bar: 30mm LIFT
STRUT SPORT
BP-51 SELCTION
BP-51 COIL OVER FRONT RH
BP-51 COIL OVER FRONT LH
BP-51 FIT KIT FRONT
UPPER STRUT BUSHES
STRUT TOP HAT KIT

REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 300 KGS
NITROCHARGER SPORT
SPRING: CONSTANT 600 KGS
NITROCHARGER SPORT
BP-51 SELECTION
BP-51 SHOCK REAR RH
BP-51 SHOCK REAR LH
BP-51 FIT KIT REAR
GREASABLE SHACKLE KIT
SPRING BUSH KIT

U BOLTS
DRIVELINE SPACER KIT
EXTRA LEAF

DIESEL ENGINE
PART NUMBER
2997
90019
2998
*90020 / 90019
2999
90020
FK56
3048
90019

QTY
1

UNIT
PRICE $

1
2
1
2
1
2

BP5190005R
BP5190005L
VM80010011
OME3135
OMETH006

1
2

1
1

ALL MODELS
PART NUMBER
EL049R
*60101 / 60023
EL068R
*60102 / 60101
EL069R
60102
BP5160004R
BP5160004L
VM80010012
OMEGS20
OMESB102
OMESB103
OMEU66
OMEU66A
OMEU66B
FK57
EL34XL

QTY

UNIT
PRICE $

2
2
2

1
1
3

4
4
5
6

2
4
1
2

REMARKS:
1

No top mounting bushes supplied, use OME3135. OE bushes may be re-used if in good condition.

Trim Packer FK56 provides 10mm lift at the wheel.

OMESB102 suits OE Shackle.


OMESB103 Bush Kit suits OME Greasable Shackle OMEGS20.

Use OMEU66 when fitting EL049R.


Use OMEU66A when fitting EL068R and EL069R.
Use OMEU66B when fitting EL069R with EL34XL.

Fitment of Driveline Spacer Kit FK57 is recommended to re-align driveline.

EL34XL will give approximately 30mm extra lift or increase loading capacity at design height by approximately 300kg.

Strut Top Hat Kit may be required if original equipment is worn.

PAGE 46

MAZDA
BT-50 1 TONNE 12/2006 - 2011 ALL MODELS

FRONT

PETROL & DIESEL ENGINES


PART NUMBER

TORSION BARS: OVER 60 KGS


NITROCHARGER SPORT
NITROCHARGER
FITTING KIT

REAR
Estimated Lift: 20mm

303013
60022
*N194 / N187
FK22

SPRING: CONSTANT 200 KGS

EL049R

U BOLTS
SPRING BUSH KIT
EXTRA LEAF
CENTRE BOLT

2
4

PART NUMBER
CS056R
60023

SPRING: CONSTANT 400 KGS


NITROCHARGER SPORT
GREASABLE SHACKLE KIT

UNIT
REMARKS:
PRICE $
1 Some Latin American 12/2006 On

Models use 303005 torsion bars,


measuring 925mm in length. The
303013 torsion bars measure
1024mm. Check OE torsion bar
length before ordering.

ALL MODELS

SPRING: MEDIUM LOAD


NITROCHARGER SPORT
NITROCHARGER SPORT

QTY

QTY

60023
CS060R 3
*60102 / 60023
OMEGS18
OMEU66
OMEU66A
OMESB97
D34XL / EL34XL
UCB19

UNIT
PRICE $

2 FK22 Front Shock Absorber Upper

Mount Supporting Bracket Kit is a


mandatory fitment.

3 Use OMEU66 when fitting CS056R and

EL049R. Use OMEU66A when fitting


CS060R. Include tray weight in constant
load calculation.

4 When remaining stock of OME P/No. is

exhausted no further product will be


available.

1
3

5 D34XL and UCB19 suits CS056R and

CS060R.

EL034XL suits EL049R.


5

B SERIES 1 TONNE 1987 - 2006 ALL MODELS

FRONT

PETROL & DIESEL ENGINES


PART NUMBER

TORSION BARS: OVER 60 KGS


NITROCHARGER SPORT
NITROCHARGER
FITTING KIT

REAR
Estimated Lift: 20mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
U BOLTS
GREASABLE SHACKLE KIT
SPRING BUSH KIT
EXTRA LEAF
CENTRE BOLT

303005
60022
N51
FK22

QTY

UNIT
REMARKS:
PRICE $

1
1
3

FK22 Front Shock Absorber Upper


Mount Supporting Bracket Kit is a
mandatory fitment.

Include tray weight in constant load


calculation.

When remaining stock of OME P/No.


is exhausted no further product will be
available.

ALL MODELS
PART NUMBER
CS026R
60023
CS027R
60023
OMEU65
OMEGS18
OMESB82
D9XL
UCB17

QTY
2

UNIT
PRICE $

2
2
4
1
2

PAGE 47

MERCEDES
G-WAGON G350 BLUETECH / G55 AMG MODELS

FRONT
Estimated Lift: 50mm
SPRING: No Bar
STRUT SPORT
SPRING: Bar Or Winch
STRUT SPORT

REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT

ALL MODELS
PART NUMBER

QTY

3028
60113
3029
60113

1
2
1
2

UNIT
PRICE $

ALL MODELS
PART NUMBER

QTY

3030
60114

1
2

UNIT
PRICE $

PAGE 48

MITSUBISHI
PAJERO / MONTERO 2000 ON ALL LWB MODELS

FRONT
Estimated Lift: 35mm
SPRING: TO 50 KGS
STRUT - SPORT
STRUT
SPRING: 51 TO 100 KGS
STRUT - SPORT
UPPER STRUT BUSHES
STRUT TOP HAT KIT

REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 300 KGS
NITROCHARGER SPORT

V6 PETROL ENGINE
PART NUMBER

QTY

2914
90006
N129S
2915
90007
OME3101
OMETH007

1
2

1
2

UNIT
PRICE $

2
4

PART NUMBER

QTY
1

UNIT 1
PRICE $

QTY

2915
90006
N129S
2924
90007
OME3101
OMETH007

1
2

1
2

UNIT
PRICE $

2
4

It is recommended that a 4 wheel


alignment is carried out.

No top mounting bushes supplied, use


OME3101. OE bushes may be reused if in good condition.

Strut Top Hat Kit may be required if


original equipment is worn.

2
1

PART NUMBER

REMARKS:

ALL MODELS

2917
60019
N152
2918
60033
N152
2995
60033

2.8 & 3.2 DIESEL ENGINES

2
1
2

PAJERO / MONTERO 2000 ON ALL SWB MODELS

FRONT
Estimated Lift: 35mm
SPRING: TO 50 KGS
STRUT - SPORT
STRUT
SPRING: 51 TO 100 KGS
STRUT - SPORT
STRUT
UPPER STRUT BUSHES
STRUT TOP HAT KIT

REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER

V6 PETROL ENGINE
PART NUMBER

QTY

2914
90006
*N129S / N109S
2915
90007
N129S
OME3101
OMETH007

1
2
3

UNIT
PRICE $

2
1

PART NUMBER

QTY
1

UNIT
PRICE $

QTY

2915
90006
N129S
2924
90007
OME3101
OMETH007

1
2

UNIT
PRICE $

2
1
2

It is recommended that a 4 wheel


alignment is carried out.

No top mounting bushes supplied, use


OME3101. OE bushes may be reused if in good condition.

When remaining stock of N109S is


exhausted no further product will be
available.

Strut Top Hat Kit may be required if


original equipment is worn.

2
1

PART NUMBER

REMARKS:

ALL MODELS

2994
60019
N152
2917
60033
N152

3.2 DIESEL ENGINE

1
2

PAGE 49

MITSUBISHI
PAJERO / MONTERO 1991 - 1999
SWB & LWB REAR LEAF SPRING MODELS

FRONT
PART NUMBER
TORSION BARS: OVER 50 KGS
NITROCHARGER SPORT
NITROCHARGER

303010
303011
60040
N18

REAR
Estimated Lift: 45 - 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 250 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
GREASABLE SHACKLE KIT

QTY
1

UNIT
PRICE $

1
2

ALL MODELS
PART NUMBER
CS022R
60057
*N56 / N54
CS023R
*60036 / 60057
N56
OMESB38
OMEGS16

QTY

UNIT
PRICE $

2
2

2
2

2
1

REMARKS:
1

Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
Important: A minimum of 60mm of droop must be maintained.
303010 suits 88 To 90 V6 Models and all Models 91 To 94 - length 1278mm.
303011 suits all Models 95 To 00 - length 1308mm.

OMESB38 must be used to fit OME springs.

PAJERO / MONTERO 1991 - 1999


ALL LWB REAR COIL SPRING MODELS

FRONT
PART NUMBER
TORSION BARS: OVER 50 KGS
NITROCHARGER SPORT
NITROCHARGER

REAR
Estimated Lift: To 20mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT

303010
303011
60040
N18

QTY
1

UNIT
PRICE $

1
2

ALL MODELS
PART NUMBER

QTY

2910
60041
2938
60041

1
2
1
2

UNIT
PRICE $

REMARKS:
1 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
Important: A minimum of 60mm of droop must be maintained.
303010 suits all Models 91 To 94 with 1278mm length.
303011 suits all Models 95 To 00 with 1308mm length.

PAGE 50

MITSUBISHI
PAJERO / MONTERO 1991 - 1999
ALL SWB REAR COIL SPRING MODELS

FRONT
PART NUMBER
60040
N18

TORSION BARS
NITROCHARGER SPORT
NITROCHARGER

REAR
Estimated Lift: 20mm

QTY

UNIT
PRICE $

ALL MODELS
PART NUMBER

QTY

2911
60041

1
2

SPRING: MEDIUM LOAD


NITROCHARGER SPORT

UNIT
PRICE $

REMARKS:
1

Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
Important: A minimum of 60mm of droop must be maintained.

PAJERO / MONTERO TO 1991


REAR LEAF SPRING MODELS (Hyundai Galloper)

FRONT

4 CYLINDER ENGINE
PART NUMBER
303009
60051

TORSION BARS: OVER 50 KGS


NITROCHARGER SPORT

REAR
Estimated Lift: 45 - 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 250 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
U BOLTS
GREASABLE SHACKLE KIT

QTY

UNIT
PRICE $

1
2

ALL MODELS
PART NUMBER
CS022R
60057
*N56 / N54
CS023R
*60036 / 60057
N56
OMESB8
OMEU54
OMEGS16

QTY

UNIT
PRICE $

2
2

2
2
4
1

2
3

REMARKS:
1

Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
Important: A minimum of 60mm of droop must be maintained.
303009 suits 82 To 90 4 cylinder Models - length 1278mm.

OMESB8 must be used with CS022R and CS023R springs.

OMEU54 only required on SWB Models.

PAGE 51

MITSUBISHI
PAJERO CHALLENGER 1989 - 1991
REAR COIL SPRING MODELS (Hyundai Galloper) (USA - MONTERO SPORT)

FRONT

REMARKS:

PART NUMBER
TORSION BARS: OVER 50 KGS
NITROCHARGER SPORT

REAR
Estimated Lift: 15mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT

303010
60051

QTY
1

UNIT
PRICE $

1
2

Raise or lower front end clearance


and trim vehicle by adjusting front
torsion bars.
Important: A minimum of 60mm of
droop must be maintained.

ALL MODELS
PART NUMBER

QTY

2910
60056

1
2

303010 suits 88 To 90 V6 Models.

UNIT
PRICE $

TRITON / L200 ML & MN 2006 ON ALL MODELS

FRONT
Estimated Lift: 10mm
SPRING: NO BAR
STRUT - SPORT
STRUT
SPRING: BAR ONLY
STRUT - SPORT
STRUT
SPRING: BAR & WINCH
STRUT - SPORT
STRUT
UPPER STRUT BUSHES
STRUT TOP HAT KIT

REAR
Estimated Lift: 20mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 300 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 500 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 800 KGS
NITROCHARGER SPORT
NITROCHARGER
U BOLTS
SPRING BUSH KIT
GREASABLE SHACKLE KIT
EXTRA LEAF
CENTRE BOLT

DIESEL ENGINE
PART NUMBER

QTY

2605
90008
N186S
2606
90008
N186S
3027
90008
N186S
OME3121
OMETH001

1
4

V6 PETROL ENGINE
UNIT
PRICE $

2
1

2
1

4
8

ALL MODELS
PART NUMBER
CS053R
60036
*N59 / N54
CS054R
60036
N59
CS022R 1
60036
N59
CS023R 1
60036
N59
OMEU71
OMEU76
OMESB38
OMEGS16
D32XL
UCB5

QTY

UNIT
PRICE $

6
2
1
7

2
1

2
1

4
8

OMESB38 is a mandatory fitment to


OME springs only. Include tray weight
in constant load calculation. Springs
can only be installed with OME Bush
Kit.

Reverse centre bolt to allow fitment.

No top mounting bushes supplied, use


OME3121. OE bushes may be reused if in good condition.

OMEU71 is to be used with CS053R,


CS054R, CS022R.

OMEU76 is to be used with CS023R.

D32XL suitable for CS053R, CS054R


and CS022R.

Strut Top Hat Kit may be required if


original equipment is worn.

2
5

OMEGS16 is a mandatory fitment to


prevent springs from inverting.

2
2

2611
90008
N186S
2605
90008
N186S
2606
90008
N186S
OME3121
OMETH001

UNIT
PRICE $

2
2

QTY

REMARKS:

2
1

PART NUMBER

4
2
1
2

PAGE 52

MITSUBISHI
TRITON / L200 MK 10/1996 - 2006 ALL MODELS

FRONT

PETROL & DIESEL ENGINES


PART NUMBER

TORSION BARS: OVER 50 KGS


NITROCHARGER SPORT
NITROCHARGER

REAR
Estimated Lift: To 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
U BOLTS
SPRING BUSH KIT
ANTI-INVERSION KIT
GREASABLE SHACKLE KIT

303006
60040
N18

QTY
1

UNIT
PRICE $ REMARKS:

1
2

Raise or lower front end clearance


and trim vehicle by adjusting front
torsion bars. Important: A minimum
of 60mm of droop must be
maintained. Torsion bar 303006 suits
1993 On Models with 39 splines.

OMESB38 is a mandatory fitment to


OME springs only. Include tray weight
in constant load calculation. Springs
can only be installed with OME bush
kits.

FK30 Anti-Inversion Kit is a


mandatory fitment, with or without
Greasable Shackle Kit.

ALL MODELS
PART NUMBER
CS022R
60050
N30E
CS023R
60050
N30E
OMEU57
OMESB38
FK30
OMEGS16

QTY

UNIT
PRICE $

2
2

4
2

TRITON / L200 TO 1996 ALL MODELS

FRONT

PETROL & DIESEL ENGINES


PART NUMBER

TORSION BARS: OVER 50 KGS


NITROCHARGER SPORT

REAR
Estimated Lift: To 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
U BOLTS
SPRING BUSH KIT
ANTI-INVERSION KIT
GREASABLE SHACKLE KIT

303006
60051

QTY
1

UNIT
PRICE $

1
2

ALL MODELS
PART NUMBER
CS022R
60058
N30E
CS023R
60058
N30
OMEU57
OMESB38
FK30
OMEGS16

QTY

UNIT
PRICE $

2
2

2
4

4
2

REMARKS:
1

Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
Important: A minimum of 60mm of droop must be maintained.
Torsion Bar 303006 suits 1993 On MJ Models with 39 splines.

OMESB38 is a mandatory fitment to OME springs only. Include tray weight in constant load calculation. Springs can only
be installed with OME Bush Kits.

4
3

FK30 Anti-Inversion kit is a mandatory fitment, with or without Greasable Shackle Kit.

When remaining stock of OME P/No. is exhausted no further product will be available.

PAGE 53

MITSUBISHI
CHALLENGER / MONTERO SPORT KH 2010 ON MODELS

FRONT
Estimated Lift: 20mm
SPRING: NO BAR
STRUT - SPORT
STRUT
SPRING: BAR ONLY
STRUT - SPORT
STRUT
SPRING: BAR & WINCH
STRUT - SPORT
STRUT
UPPER STRUT BUSHES
STRUT TOP HAT KIT

REAR
Estimated Lift: 35mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER

V6 PETROL ENGINE
PART NUMBER

QTY

2611
90008
N186S
2605
90008
N186S
2606
90008
N186S
OME3121
OMETH001

1
1

UNIT
PRICE $

2
1

2
1

1
2

DIESEL ENGINE
PART NUMBER

QTY

2605
90008
N186S
2606
90008
N186S
3027
90008
N186S
OME3121
OMETH001

1
1

1
1

QTY

2910
60076
N116
2938
*60075 / 60076
N116
2838
60075
N116

1
1
2

UNIT
PRICE $

2
1
2
1
2

REMARKS:
1

No top mounting bushes supplied, use OME3121. OE bushes may be re-used if in good condition.

Strut Top Hat Kit may be required if original equipment is worn.

CHALLENGER / MONTERO SPORT 2000 - 2008 LWB


(COIL REAR MODELS)

FRONT

V6 PETROL ENGINE
PART NUMBER

TORSION BARS: OVER 50 KGS


NITROCHARGER SPORT

REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER

303011
60040

QTY
1

UNIT
PRICE $

1
2

ALL MODELS
PART NUMBER

QTY

2911
60059
N116
2910
60059
N116

UNIT
PRICE $

2
1
2

REMARKS:
1

Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
Important: A minimum of 60mm of droop must be maintained.

PAGE 54

2
1

ALL MODELS
PART NUMBER

UNIT
PRICE $

MITSUBISHI
CHALLENGER V6 / MONTERO SPORT WAGON PA
1998 - 2000 (REAR LEAF SPRING MODELS)

FRONT

V6 PETROL ENGINE
PART NUMBER

TORSION BARS: OVER 50 KGS


NITROCHARGER SPORT

REAR
Estimated Lift: 25mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
GREASABLE SHACKLE KIT
EXTRA LEAF
CENTRE BOLT

303011
60040

QTY
1

UNIT
PRICE $

1
2

ALL MODELS
PART NUMBER
CS040R 2
60057
*N56 / N54
CS041R 2
*60036 / 60057
N56
OMESB83
OMEGS16
D7XL
UCB5

QTY

UNIT
PRICE $

2
3

2
3
2

2
1
2

REMARKS:
1

Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
Important: A minimum of 60mm of droop must be maintained.
303011 suits all Models with bar - length 1308mm.

OMEGS16 is a mandatory fitment to prevent springs from inverting.

OMESB83 is a mandatory fitment to OME springs only. Include tray weight in constant load calculation. Springs can only
be installed with OME Bush Kit. The Centre Bolt on CS040R must be reversed prior to fitment.

PAGE 55

NISSAN
PATROL Y62 2010 ON (NON HBMC MODELS)

FRONT
Estimated Lift: 40mm
SPRING: No Bar
STRUT - SPORT
SPRING: Bar
STRUT - SPORT
SPRING: Bar / Winch
STRUT - SPORT

REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT

V8 PETROL ENGINE
PART NUMBER
2977
90014
2978
*90015 / 90014
2979
90015

QTY
2

UNIT
PRICE $

1
2
1
2
1
2

ALL MODELS
PART NUMBER
2986
60084
2987
60084
2988
60084

QTY
1

UNIT
PRICE $

1
2
1
2
1
2

REMARKS:
1

It is recommended that a 4 wheel alignment is carried out.

No top mounting bushes supplied, re-use OE bushes.

PAGE 56

ARMOURD APPLICATION - 4.5T


GVM is available refer page 15 for
details

OFF ROAD USE ONLY - NISSAN


PATROL Y60 & Y61 LWB

FRONT

PART
NUMBER

QTY

UNIT
PRICE $

2412
3033
2413
3036
2414

1
1
1
1
1

250 lbf/in

60013L

Suits 75mm &100mm coils

GQ pre 8/1989 models


GQ 8/1989 on models
GU pre 01/2000 models
GU 01/2000 on models

COMMENTS

COILS
75mm LIFT - SPRING TO 50KG
75mm LIFT - SPRING 51 TO 110KG
100mm LIFT - SPRING TO 50KG
100mm LIFT - SPRING 51 TO 110KG
125mm LIFT - SPRING TO 50KG

SHOCKS
NITROCHARGER SPORT

STEERING DAMPER
STABILISER

COMPONENTS
ADJUSTABLE PANHARD ROD
ADJUSTABLE PANHARD ROD WITH SPH
BEARING
SPHERICAL BEARING TO SUIT PANHARD
COIL SPRING TRIM PACKER
COIL SPRING TRIM PACKER
GEARBOX PACKER KIT

REAR

OMESD34
OMESD36
OMESD11
OMESD01
PANR004
PANR028X
PAN3097A
OME3098
OMEGQPF05
OMEGQPF10
GQGK01

PART
NUMBER

320 lbf/in
250 lbf/in
320 lbf/in
250 lbf/in

Pre 01/2000 wagon CC models, RHD only


01/2000 on models not CC, RHD only
Pre 01/2000 models, LHD only
Suits OE and Adjustable 01/00 on
5mm

1
1
1

10mm
GQ only

QTY

UNIT
PRICE $

COMMENTS

COILS

75mm LIFT - MEDIUM


75mm LIFT - CONSTANT 200KG
75mm LIFT - CONSTANT 400KG
100mm LIFT - MEDIUM
100mm LIFT - CONSTANT 200KG
100mm LIFT - CONSTANT 400KG
125mm LIFT - MEDIUM

SHOCKS
NITROCHARGER SPORT

COMPONENTS

2415
3034
3035
2416
3037
3038
2417

1
1
1
1
1
1
1

60015L

290 lbf/in
300 lbf/in
470 lbf/in, coil tower reinforcing recommended
290 lbf/in
300 lbf/in
470 lbf/in, coil tower reinforcing recommended
290 lbf/in

PANR005

Pre 01/2000 wagon CC models, RHD & LHD

ADJUSTABLE PANHARD ROD WITH SPH


BEARING

PANR029X

01/2000 on models not CC, RHD & LHD

SPHERICAL BEARING TO SUIT PANHARD


HEAVY DUTY LOWER TRAILING ARMS
ADJUSTABLE UPPER TRAILING ARMS
TRIM PACKER
TRIM PACKER

OME3098
LTA3044
UTAA106
OMEGQPR05
OMEGQPR10

1
1
1

Suits OE and Adjustable 01/00 on


Standard Length

ADJUSTABLE PANHARD ROD

50mm on car adjustable


5mm
10mm

Notification: Modifications for off - road use only


The products listed in this selection chart are deemed by Old Man Emu to be suitable for off road use and their legality for public
road use should be certified by the relevant Registration Authority. An Off Road Use Only Disclaimer must be signed by the
customer.
Modifications and replacement of other associated components will be required.
Lift increase is approximate and will depend on vehicle weights.
Warranty Implications
The fitter selling these shocks must inform the customer there is no warranty due to the severe nature of competition racing.
The fitter must also note on the customer's receipt "racing application no warranty applies". This will prevent any future
misunderstanding.

PAGE 57

NISSAN
PATROL GU Y61 ALL LWB MODELS

FRONT
Estimated Lift: 50mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 50 KGS: 20mm LIFT
NITROCHARGER SPORT
NITROCHARGER
CASTER KIT
STEERING DAMPER
TRIM PACKER
OIL PAN PACKER KIT

REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: MEDIUM 30mm LIFT
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
SWAY BAR EXT KIT

PETROL 4.5, 4.8 &


DIESEL 4.2
PART NUMBER

QTY

2970
61012
N19
2971
60013
N19
2972
61012
N19
OMECA77B
OMESD11
OMESD01
OMEGQPF05
OMEGQPF10
FK25

UNIT
PRICE $

2
1
2
1
2
2
5

1
2

DIESEL 2.8 & 3.0 TURBO


PART NUMBER

QTY

2973
61012
N19
2970
60013
N19
2974
61012
N19
OMECA77B
OMESD11
OMESD01
OMEGQPF05
OMEGQPF10
FK25

UNIT
PRICE $

2
1
2
1
2
2
5

1
2

ALL MODELS
PART NUMBER

QTY

2980
4
61014
N29
2981
4
60015
N29
2985
6
60015
N29
2982
4
61014
N29
Do not use Packers
FK18
3
FK24

UNIT
PRICE $

2
1
2
1
2
1
2

REMARKS:
1

Coil trim packers may be required to trim vehicles.


Packers must be installed to the bottom of front coils.

OMECA77B Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if
OMECA77B kit is required. FK25 may be required for some European Models when Caster Kit is fitted.

FK18: Rear Sway Bar Extension Bracket is mandatory fitment to Models with fixed sway bar to prevent damage
to sway bar when suspension is at full extension. FK24 suits Models with detachable sway bar.

Special Note: Due to limited clearance between tailshaft and chassis cross member, OME does not recommend
fitment of gear box packers.

OMESD11 steering damper fits all Models To 1/2000. OMESD01 fits 2/2000 On Models.
To verify correct fitment for individual vehicles compare OE mounts with Steering Stabilisers Specifications
on page 143.

It is highly recommended to reinforce coil towers if fitting heavy rear springs.

PAGE 58

NISSAN
PATROL GU Y61 SWB MODELS

FRONT
Estimated Lift: 40mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
STEERING DAMPER
CASTER KIT
OIL PAN PACKER KIT

REAR
Estimated Lift: 40mm
SPRING: LIGHT LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
SWAY BAR EXT KIT
GEAR BOX PACKER KIT
TRIM PACKER

2.8 & 3.0 TURBO DIESEL


PART NUMBER

QTY

2974E
61012
N19
2972E
60013
N19
OMEGQPF05
OMEGQPF10
OMESD01
OMESD11
OMECA77B 2
FK25

UNIT
PRICE $

2
1
2

ALL MODELS
PART NUMBER

QTY

2GQ02A
61014
N29
2GQ02B
61014
N29
2GQ02D
60015
N29
FK18
FK24
GQGK02 3
OMEGQPR05
OMEGQPR10

UNIT
PRICE $

2
1
2
1
2
4

REMARKS:
1

OMESD01 fits 2/2000 On Models.


OMESD11 fits all Models To 1/2000.

OMECA77B Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if
OMECA77B kit is required.

FK25 x 2 Oil Pan Kits must be installed when OMECA77B Caster Kit or GQGK02 Gear Box Packer Kit are fitted.

FK18: Rear Sway Bar Extension Bracket is mandatory fitment to Models with fixed sway bar to prevent damage
to sway bar when suspension is at full extension. FK24 suits Models with detachable sway bar.

GQGK02 Gear Box Packer Kit is designed to space down the gear box cross member from the chassis to
reduce tail shaft flange angle thereby reducing driveline vibration. In some cases two (2) kits may be required.

PAGE 59

NISSAN
PATROL GU Y61 ALL COIL CAB CHASSIS MODELS

FRONT
Estimated Lift: 50mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
CASTER KIT
TRIM PACKER

REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
FITTING KIT
TRIM PACKER

ALL 4.2 DIESEL ENGINES


PART NUMBER

QTY

2970
61012
N19
2971
60013
N19
OMESD11
OMECA77B
OMEGQPF05
OMEGQPF10

UNIT
PRICE $

2
1
2

3.0 TURBO DIESEL ENGINE


PART NUMBER

QTY

2973
61012
N19
2970
60013
N19
OMESD11
OMECA77B
OMEGQPF05
OMEGQPF10

1
2
1
2

ALL MODELS
PART NUMBER

QTY

2983
61014
N29
2984
60015
N29
2985
60015
N29
3
FK18
Do not use Packers

UNIT
PRICE $

2
1
2
1
2
1

REMARKS:
1

OMECA77B Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if
OMECA77B kit is required.

Coil trim packers may be required to trim vehicle to a maximum of 15mm.


Packers must be installed to the bottom on front coil.

FK18 Rear Sway Bar Extension Bracket is mandatory fitment to prevent damage
to sway bar when suspension is at full extension.

PAGE 60

UNIT
PRICE $

NISSAN
PATROL GU Y61 CAB CHASSIS
COIL: FRONT / LEAF: REAR

FRONT
Estimated Lift: 50mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
CASTER KIT
TRIM PACKER

REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
ANTI INVERSION KIT
GREASABLE SHACKLE KITS
U BOLT
BRAKE PROP BRACKET
EXTRA LEAF
CENTRE BOLT

ALL 4.2 DIESEL ENGINES


PART NUMBER

QTY

2970
60055
N19
2971
60055
N19
OMESD11
OMECA77B
OMEGQPF05
OMEGQPF10

UNIT
PRICE $

2
1
2

3.0 TURBO DIESEL ENGINE


PART NUMBER

QTY

2973
60055
N19
2970
60055
N19
OMESD11
OMECA77B
OMEGQPF05
OMEGQPF10

1
2
1
2

ALL MODELS
PART NUMBER
CS016RA/B 3
60054
N25
CS016RA/B 3
60054
N25
OMESB64
FK08
OMEGS1
OMEGP2
OMEU64
FK78
D15XL
UCB11

QTY
5

UNIT
PRICE $

1+1
2

1+1
2
2

1
4
1
2

REMARKS:
1

Coil trim packers may be required to trim vehicle to a maximum of 15mm per coil.
Packers must be installed to the bottom on front coils.

OMECA77B Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if
OMECA77B kit is required.

FK08 Anti Inversion Kit is mandatory fitment if greasable shackles are not fitted.
Refer OME Technical & Fitting Manual.

For improved ride quality on vehicles carrying medium loads remove the 3rd leaf.
Include tray weight in constant load calculation.

PAGE 61

UNIT
PRICE $

NISSAN
PATROL GQ Y60 ALL SWB & LWB MODELS

FRONT
Estimated Lift: 40 - 50mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 50 KGS: 30mm LIFT
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
STEERING DAMPER
CASTER KIT

REAR
Estimated Lift: 30 - 50mm
SPRING: LIGHT LOAD
NITROCHARGER SPORT
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER

4.2 ENGINE
PART NUMBER

QTY

2975
61012
*N21 / N23F
2976
60013
N21
2974
61012
*N21 / N23F
OMEGQPF05
OMEGQPF10
OMESD36
OMESD34
OMECA77B

1
6

2.8 & 3.0 ENGINES


UNIT
PRICE $

2
1

2
1

PART NUMBER

QTY

2974
61012
6
*N21 / N23F
2972
60013
6
N21
NOT APPLICABLE
OMEGQPF05
1
OMEGQPF10
OMESD36
5
OMESD34
2
OMECA77B

LWB MODEL
PART NUMBER

QTY

2GQ02C
61014
2GQ02AM
61014
N29
2GQ02J
60015
N29

1
2
1

2GQ02LP
4
61014
N29
Do not use Packers
3
GQGK01

2
1
2

SWB MODEL
UNIT
PRICE $

2
1
2

LPG CONVERSION
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
GEAR BOX PACKER KIT

UNIT
PRICE $

1
2
1

PART NUMBER

QTY

2GQ02CM
61014
2GQ02C
61014
N29
2GQ02G
60015
N29

1
2
1
2
1
2

LPG CONVERSION
2GQ02LP
4
61014
N29
Do not use Packers
3
GQGK01

1
2
1

REMARKS:
1

Coil trim packers may be required to trim vehicle to a maximum of 15mm per coil.
Packers must be installed to the top on rear coils and to the bottom on front coils.

OMECA77B Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if
OMECA77B kit is required.

Gearbox Packer Kit is designed to space down the gearbox cross member from the chassis to reduce tail shaft
flange angle thereby reducing driveline vibration.

LPG conversion equated to 100-125 litre rear mounted gas tank and a 70-75 litre mid mounted auxiliary petrol
tank.

OMESD36 fits 8/89 On Models.


OMESD34 fits pre 8/89 Models.

When remaining stock of N21 is exhausted no further product will be available.

PAGE 62

UNIT
PRICE $

NISSAN
PATROL GQ Y60 CAB CHASSIS COIL SPRING MODELS

FRONT
Estimated Lift: 50mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
STEERING DAMPER
CASTER KIT

4.2 ENGINES
PART NUMBER

QTY

2975
61012
N23F
2976
60013
N21
OMEGQPF05
OMEGQPF10
OMESD36
OMECA77B

REAR
Estimated Lift: 40 - 50mm
SPRING: MEDIUM LOAD
40mm LIFT
NITROCHARGER SPORT
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
GEAR BOX PACKER KIT

UNIT
PRICE $

2
1

1
1

ALL MODELS
PART NUMBER
2GQ02C
61014
2GQ02J
60015
N29
OMEGQPR05
OMEGQPR10
GQGK01

QTY
3

2
1

UNIT
PRICE $

2
1
4

REMARKS:
1

Coil trim packers may be required to trim vehicle to a maximum of 15mm per coil.
Packers must be installed to the top on rear coils and to the bottom on front coils.

OMECA77B Caster Kit will increase caster angle by 2o. Check manufacturer's specifications to determine if
OMECA77B kit is required.

Include tray weight in constant load calculation.

Gearbox Packer Kit is designed to space down the gearbox cross member from the chassis to reduce tail shaft
flange angle thereby reducing driveline vibration.

When remaining stock of N21 & N23F is exhausted no further product will be available.

PAGE 63

NISSAN
PATROL GQ Y60 UTE & CAB CHASSIS LEAF SPRING MODELS

FRONT
Estimated Lift: 30mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
GREASABLE SHACKLE KITS
STEERING DAMPER
CENTRE BOLT SPACER KIT
EXTRA LEAF
CENTRE BOLT

REAR
Estimated Lift: 45mm
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 600 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
GREASABLE SHACKLE KITS
U BOLTS
ANTI INVERSION KIT
EXTRA LEAF
CENTRE BOLT

4.2 ENGINE
PART NUMBER
CS003F
60068
N28
CS004F
60068
N28
OMESB1
OMEGS2
OMEGP2
OMESD22
CBS02
D1XL
UCB3

QTY
1

5
1

UNIT
PRICE $ REMARKS:
1

CBS02 x 2 centre bolt spacers


required for front spring fitment.

FK08 Anti Inversion Kit is mandatory


fitment if greasable shackles are not
fitted. Refer OME Technical & Fitting
Manual.

2
1

Include tray weight in constant load


calculation.

Remove 3rd leaf for vehicles requiring


400kg constant load springs.

When remaining stock of N28 is


exhausted no further product will be
available.

2
2
2
2

1
2
2
2

ALL MODELS
PART NUMBER
CS016RA/B 2
60054
N25
CS016RA/B
60054
N25
OMESB64
OMEGS1
OMEGP2
OMEU58B
FK08
D15XL
UCB11

QTY
4

UNIT
PRICE $

1+1
2

1+1
2
2
1

4
1
2

PAGE 64

NISSAN
PATROL MQ 260 LWB SPANISH BUILT ALL 2.8TD MODELS

FRONT
Estimated Lift: 30 - 40mm
SPRING: TO 50 KGS
NITROCHARGER
SPRING: 51-100 KGS
NITROCHARGER
SPRING BUSH KIT
U BOLTS
EXTRA LEAF
CENTRE BOLT

REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER
SPRING BUSH KIT
U BOLTS
EXTRA LEAF
CENTRE BOLT

PETROL & DIESEL ENGINES


PART NUMBER
CS016F
N19
CS016F
N19
OMESB3
OMESB29
OMEU56
OMEU57
D30XL
UCB17

QTY
1

UNIT
REMARKS:
PRICE $

2
2

ALL MODELS
PART NUMBER
CS011R
N89
CS012R
*N42 / N89
OMESB2
OMESB29
OMEU58
D12XL
UCB1

QTY

UNIT
PRICE $

2
2
2
4
2

PAGE 65

To improve ride quality remove 3rd


leaf from top of spring.

Front U Bolt:
OMEU56 fits to right hand side.
OMEU57 fits to left hand side.

NISSAN
PATROL MQ M60 ALL MODELS

FRONT

PETROL & DIESEL ENGINES

Estimated Lift: 30 - 40mm

PART NUMBER

SPRING: TO 50 KGS

CS010FA / B

NITROCHARGER
SPRING: 51 TO 110 KGS

QTY
1

EARLY *N47/N96
LATE
N49
CS011FA / B 1
EARLY *N47/N96
LATE
N49
OMESB28
2
OMESB29
OMESB31
2
OMESB29
OMEU56
4
OMEU57
OMESD22
5
D11XL
UCB5

NITROCHARGER

SPRING BUSH KIT

U BOLTS
STEERING DAMPER
EXTRA LEAF
CENTRE BOLT

REAR

UNIT
PRICE $

1+1
2
1+1
2

1
2

ALL MODELS

Estimated Lift: 50mm

PART NUMBER

SPRING: MEDIUM LOAD


NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER
SPRING BUSH KIT
U BOLTS
EXTRA LEAF
CENTRE BOLT

CS011R
N97
CS012R
N48
OMESB2
OMESB29
OMEU58
D12XL
UCB1

QTY

UNIT
PRICE $

2
2
3

2
4
2

REMARKS:
1

Models with P40 4 litre engine require CS011FA / B springs.


Individual vehicles fitted with A / B fitment may experience a pronounced trimming problem to right hand side.
In these cases fitment of an XL leaf to the right hand side will correct problem.

Front Spring Bushes:


Early model (round headlight) require
OMESB28 and OMESB29.
Late model (square headlight) require
OMESB31 and OMESB29.

OME Bush Kits must be used to enable springs to be fitted.

Front U Bolt:

D11XL suitable for CS010FA / B.

OMEU56 fits to right hand side


OMEU57 fits to left hand side

PAGE 66

NISSAN
NAVARA D23 NP300

FRONT
Estimated Lift: 20 - 30mm
SPRING: No Bar
STRUT - SPORT
SPRING: Bar
STRUT -SPORT
SPRING: Bar / Winch
STRUT -SPORT
UPPER STRUT BUSHES
STRUT TOP HAT KIT
TRIM PACKER

REAR
Esrimated Lift: 30mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 200KG
NITROCHARGER SPORT
SPRING: CONSTANT 400KG
NITROCHARGER SPORT
SPRING: CONSTANT 600KG
NITROCHARGER SPORT
FITTING KIT - SWAY BAR / BRAKE

REAR
Esrimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 300KG
NITROCHARGER SPORT
SPRING: CONSTANT 600KG
NITROCHARGER SPORT
GREASABLE SHACKLE KIT
SPRING BUSH KIT
U BOLTS
FITTING KIT - BUMP SPACER
EXTRA LEAF

TWIN TURBO DIESEL


PART NUMBER

QTY

3099
90032
3100
90032
3101
90032
OME3139
OMETH005

1
2
1
2
1
2

FK84

UNIT
PRICE $

SINGLE TURBO DIESEL


PART NUMBER
2608
90032
3099
90032
3100
90032

QTY
1

UNIT
PRICE $

1
2
1
2
1
2

1
3
2

FK84

COIL SPRING REAR


PART NUMBER

QTY

3095
60136
3096
60137* / 60136
3097
60137
3098
60137
FK85

1
2
1
2
1
2
1
2
1

U
UNIT
N
PRICE $ REMARKS:
I

LEAF SPRING REAR


PART NUMBER

QTY

EL083R
60134

1
2
1
2
1

EL084R
60134 / 60135*
EL085R
60135
OMEGS24
OMESB114
OMESB115
OMEU59A
OMEU59B
FK83
EL43XL

UNIT
PRICE $

2
1
5

7
8

PAGE 67

No top mounting bushes supplied use


OME 3139. OE bushes may be re-used if
in good condition

Trim packer FK84 provides approximately


100 lift at the wheel

Stut Top Hat Kit may be required if


original equipment is worn

Kit FK85 is REQUIRED when fitting all


OME Rear Shocks

OMESB114 suits OE Shackle


OMESB115 Bush Kits suits OME
Greasable Shackle, OMEGS20

Use OMEU59A when fitting EL083R


Use OMEU59B when fitting EL084R and
EL085R

Fitment of Bump Spacer Kit FK83 is


REQUIRED when fitting all OME rear leaf
springs

EL43XL will give approximately 15mm


extra lift or increase loading capacity at
design height by approximately 300KGS

NISSAN
NAVARA D40 2005 ON ALL MODELS (USA - NISSAN FRONTIER)

FRONT
Estimated Lift: 20 - 30mm
SPRINGS: TO 40 KGS
STRUT - SPORT
STRUT
SPRINGS: 41 TO 80 KGS
STRUT - SPORT
STRUT
UPPER STRUT BUSHES
STRUT TOP HAT KIT

REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
GREASABLE SHACKLE KIT
U BOLTS
EXTRA LEAF
CENTRE BOLT

DIESEL & V6 PETROL


PART NUMBER

QTY

2607
90003
N183S
2608
90003
N183S
OME3139
OMETH005

1
1

UNIT
PRICE $

PART NUMBER

QTY

2608
90003
N183S
2631
90003
N183S
OME3139
OMETH005

2
1

ALL MODELS
PART NUMBER
CS150R
60017
N185
OMESB99
OMESB100
CS151R
*60110 / 60017
N185
OMESB99
OMESB100
OMEGS15
OMEU53A
D31XL
UCB19

V6 TURBO DIESEL

QTY

1
1

1
5

OE plastic stone shield must be


refitted. No top mounting bushes
supplied, use OME3139. OE bushes
may be re-used if in good condition.

UNIT 1
PRICE $

Use:
OMESB99 with OE Shackles.

OMESB100 when installing


OMEGS15.

Include tray weight in constant load


calculation.
OE U bolt plate bolt holes may need
to be enlarged when fitting OME U
bolts.
Strut Top Hat Kit may be required if
original equipment is worn.

2
4

REMARKS:

UNIT
PRICE $

1
4
2

NAVARA D22 10/2002 ON ALL MODELS


NP300 2008 ON ALL MODELS

FRONT

PART NUMBER

TORSION BARS: OVER 50 KGS

303007

NITROCHARGER SPORT

60034

REAR
Estimated Lift: 30mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
U BOLTS
U BOLT THREAD SPACER KIT
GREASABLE SHACKLE KIT
EXTRA LEAF
CENTRE BOLT

QTY
1

UNIT REMARKS:
PRICE $ 1 Raise or lower front end clearance and trim
vehicle by adjusting front torsion bars.
Important: A minimum of 60mm of droop
must be maintained.

ALL MODELS
PART NUMBER
CS032R
60035
N56
CS031R
60035
N59
OMESB91
OMESB105
OMEU63
FK01
OMEGS21
D18XL
UCB14

QTY
2
3

6
3

Include tray weight in constant load


calculation. For constant 400kg
loads, add D18XL to CS031R.

CS032R has a 25mm lower cambered


2nd stage for improved ride quality,
however under heavy load this will
cause the ride height to be 25mm
lower.

FK01 U Bolt Thread Spacer Kit


requied on all cab chassis Models.

2
4

It may be necessary to slightly


increase the clearance in the front
wishbone to allow shock absorber to
fit. Do not modify shock absorber.

UNIT
PRICE $

1
2

PAGE 68

OMESB91 suits OE Shackle.


6

OMESB105 suits OME Greasable


Shackle OMEGS21.

NISSAN
NAVARA D21 & D22 TO 8/2002 ALL MODELS

FRONT
TORSION BARS: OVER 50 KGS
NITROCHARGER SPORT
STEERING DAMPER

REAR
Estimated Lift: 30mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
U BOLTS
EXTRA LEAF
CENTRE BOLT

PART NUMBER
303007
303008
60021
OMESD35

QTY
1

2
1

UNIT
REMARKS:
PRICE $
Raise or lower front end clearance
and trim vehicle by adjusting front
torsion bars. 303007 suits D22 &
303008 suits D21 Models.

Important: A minimum of 60mm of


droop must be maintained.

ALL MODELS
PART NUMBER
CS030R
60035
N56
CS031R
60035
N59
OMESB81
OMEU63
D18XL
UCB14

QTY

UNIT
PRICE $

It may be necessary to slightly


increase the clearance in the front
wishbone to allow shock absorber to
fit. Do not modify shock absorber.

On later Models steering damper was


not fitted. Check vehicle to confirm it
does have an original steering damper
fitted.

For constant 400kg loads, add D18XL


to CS031R. Include tray weight in
constant load calculation.

2
4

2
2
4
2

PATHFINDER R51 2005 ON (NOT USA MANUFACTURED MODEL)

FRONT
Estimated Lift: 30mm
SPRING: TO 40 KGS
STRUT - SPORT
STRUT
SPRING: 41 TO 100 KGS
STRUT - SPORT
STRUT
UPPER STRUT BUSHES
STRUT TOP HAT KIT

REAR
Estimated Lift: 30mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT

DIESEL & V6 PETROL


PART NUMBER

QTY

2607
90003
N183S
2608
90003
N183S
OME3139
OMETH005

1
1

V6 TURBO DIESEL

UNIT
PRICE $

2
1

1
2

ALL MODELS
PART NUMBER

QTY

2609
60016
2610
60016

1
2
1
2

PART NUMBER

QTY

2608
90003
N183S
2631
90003
N183S
OME3139
OMETH005

1
1

UNIT
PRICE $

2
1
2

1
2

REMARKS:

UNIT
PRICE $

PAGE 69

OE plastic stone shield must be


refitted and a 4 Wheel alignment
must be carried out after fitment of
OME suspension. No top mounting
bushes supplied, use OME3139. OE
bushes may be re-used if in good
condition.
Strut Top Hat Kit may be required if
original equipment is worn.

NISSAN
PATHFINDER R50 1996 - 2005 V6 MODELS

FRONT
Estimated Lift: 15mm
SPRING: NO ACCESSORIES
SPRING: TO 50 KGS
SPRING: 51 TO 100 KGS
STRUT
FITTING KIT

REAR
Estimated Lift: 20mm
SPRING: MEDIUM LOAD
NITROCHARGER

V6 MODEL
PART NUMBER
2921
2923
2928
N145S + N146S
SMP638

QTY

REMARKS:

UNIT 1
PRICE $
2

Vehicles with ABS will require ABS


Bracket Kit SMP638.

N146S Right Hand Side x 1


N145S Left Hand Side x 1
No top mounting bushes supplied, reuse OE bushes.

1
2

N61: Suit Models To 1/'99. N104: Suit


Models from 2/'99 On.

1+1
1

ALL MODELS
PART NUMBER

QTY

2922
N61
N104

1
1

UNIT
PRICE $

PATHFINDER TO LATE 1995 ALL MODELS

FRONT

REMARKS:

PART NUMBER
TORSION BARS
NITROCHARGER SPORT
STEERING DAMPER

REAR
Estimated Lift: 20mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER

60031
OMESD35

QTY

UNIT
PRICE $

1
2

Important: A minimum of 60mm of


droop must be maintained.

2
1
2

ALL MODELS
PART NUMBER

QTY

2920
*60064 / 60032
*N42 / N89

Raise or lower front end clearance


and trim vehicle by adjusting front
torsion bars.

UNIT
PRICE $

It may be necessary to slightly


increase the clearance in the front
wishbone to allow shock absorber to
fit. Do not modify shock absorber.

TERRANO II R20 1996 - 2005

FRONT

PETROL & DIESEL ENGINES


PART NUMBER

TORSION BARS
NITROCHARGER SPORT
NITROCHARGER

REAR
Estimated Lift: 20mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER

60031
N65

QTY

REMARKS:

UNIT
1
PRICE $

1
2

ALL MODELS
PART NUMBER

QTY

2920
60058
N30

1
3

UNIT
PRICE $

PAGE 70

Raise or lower front end clearance


and trim vehicle by adjusting front
torsion bars.
It may be necessary to slightly
increase the clearance in the front
wishbone to allow shock absorber to
fit. Do not modify shock absorber.

NISSAN
XTERRA 2005 ON MODELS

FRONT
Estimated Lift: 30mm
SPRINGS: TO 40 KGS
STRUT - SPORT
STRUT
SPRINGS: 41 TO 80 KGS
STRUT - SPORT
STRUT
UPPER STRUT BUSHES
STRUT TOP HAT KIT

REAR
Estimated Lift: 30mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
GREASABLE SHACKLE KIT
U BOLTS
FITTING KIT
EXTRA LEAF

V6 PETROL ENGINE
PART NUMBER

QTY

2607
90003
N183S
2608
90003
N183S
OME3139
OMETH005

1
1

UNIT
PRICE $

2
1

1
5

ALL MODELS
PART NUMBER
CS061R
60017
N185
OMESB99
OMESB100
OMEGS15
OMEU72
FK42
D37XL

QTY

UNIT
PRICE $

4
3

3
4

2
2
1
4
1
2

REMARKS:
1

No top mounting bushes supplied, use OME3139. OE bushes may be re-used if in good condition.

OMESB99 suits factory shackles.


OMESB100 suits OMEGS15 Greasable Shackle Kit.

FK42 is a mandatory fitment to space sway bar link away from shock absorber.

CS061R with D37XL provides approximately 60mm lift over factory with no additional rear load.
CS061R with D37XL provides approximately 30mm lift over factory with constant 200kg additional rear load.

Strut Top Hat Kit may be required if original equipment is worn.

PAGE 71

SSANGYONG
MUSSO, SPORT UTILITY & KORANDO 1995 - 2005

FRONT

PETROL & DIESEL ENGINES


PART NUMBER

TORSION BARS
NITROCHARGER SPORT
NITROCHARGER

60031
N65

REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER

QTY

UNIT
PRICE $

ALL MODELS
PART NUMBER

QTY

2937
N118

1
2

UNIT
PRICE $

SUZUKI
GRAND VITARA 08/2005 ON

FRONT
Estimated Lift: 20mm
SPRING: TO 35 KGS
STRUT

PETROL V6 (2.7) (3.2)


DIESEL (1.9)
PART NUMBER
2623
N217S + N218S

REAR
Estimated Lift: 20mm
SPRING: MEDIUM LOAD
NITROCHARGER

QTY
1

PETROL 4 CYLINDER (2.0)

UNIT
PRICE $

PART NUMBER
2624
N217S + N218S

1
1+1

ALL MODELS
PART NUMBER

QTY

2625
OME036

1
2

QTY
1

UNIT
PRICE $

1
1+1

REMARKS:

UNIT
PRICE $

N217S Left Hand Side.


N218S Right Hand Side.

GRAND VITARA TO 2005

FRONT
Estimated Lift: 30mm
SPRING: TO 35 KGS
STRUT
SPRING: 36 TO 75 KGS
STRUT
COIL PACKER

REAR
Estimated Lift: 30mm
SPRING: MEDIUM LOAD
NITROCHARGER

PETROL
4 & 6 CYLINDER ENGINE
PART NUMBER

QTY

2959
N103S
2962
N103S
OMESJR10

1
2
1
2

UNIT
PRICE $

ALL MODELS
PART NUMBER

QTY

2961
N105

1
2

DIESEL ENGINE
PART NUMBER

QTY

2962
N103S
2962
N103S
OMESJR10

1
2
1
2

UNIT
PRICE $

REMARKS:

UNIT
PRICE $

PAGE 72

Coil packer OMESJR10 can be used


to increase ride height.

SUZUKI
VITARA WAGON 1988 - 2005

FRONT
Estimated Lift: 25 - 30mm

V6 PETROL ENGINE
PART NUMBER

QTY

2950
N103S
2959
N103S

1
2
1
2

SPRING: TO 35 KGS
STRUT
SPRING: 36 TO 75 KGS
STRUT

REAR
Estimated Lift: 30mm

UNIT
PRICE $

ALL MODELS
PART NUMBER

QTY

2954
N105
2955
N105

1
2
1
2

SPRING: LIGHT LOAD


NITROCHARGER
SPRING: MEDIUM LOAD
NITROCHARGER

UNIT
PRICE $

VITARA WAGON 1988 - 2005

FRONT
Estimated Lift: 30mm

4 CYLINDER PETROL ENGINE


PART NUMBER

QTY

2960
N103S
2953
N103S

1
2
1
2

SPRING: TO 35 KGS
STRUT
SPRING: 36 TO 75 KGS
STRUT

REAR
Estimated Lift: 30mm

UNIT
PRICE $

ALL MODELS
PART NUMBER

QTY

2954
N105
2955
N105

1
2
1
2

SPRING: LIGHT LOAD


NITROCHARGER
SPRING: MEDIUM LOAD
NITROCHARGER

UNIT
PRICE $

VITARA SWB TO 2005

FRONT
Estimated Lift: 30mm
SPRING: TO 35 KGS
STRUT

REAR
Estimated Lift: 30mm
SPRING: MEDIUM LOAD
NITROCHARGER

4 CYLINDER PETROL ENGINE


PART NUMBER
2951
N103S

QTY
1

UNIT
PRICE $

1
2

ALL MODELS
PART NUMBER
2952
N32

QTY
2

REMARKS:

UNIT
PRICE $

1
2

PAGE 73

Front strut has 40mm longer travel


than original equipment.

Rear shock has 50mm longer travel


than original equipment.

SUZUKI
XL7 WAGON 2001 - 2005

FRONT

PETROL ENGINE

Estimated Lift: 25mm


SPRING: NO ACCESSORIES
STRUT
BUMP STOP SPACER KIT

REAR

PART NUMBER

QTY

2956
N103S
FK28

1
2
1

UNIT
PRICE $

DIESEL ENGINE
PART NUMBER

QTY

2962
N103S
FK28

1
2
1

UNIT
PRICE $

ALL MODELS

Estimated Lift: 35mm


SPRING: MEDIUM LOAD
NITROCHARGER

PART NUMBER

QTY

2968
N105

1
2

UNIT
PRICE $

REMARKS:
1

FK28 Bump Stop Spacer Kit is a mandatory fitment with N103S Struts.

EQUATOR (US MARKET ONLY)

FRONT

DIESEL & V6 PETROL

Estimated Lift: 30mm


SPRINGS: TO 40 KGS
STRUT - SPORT
STRUT
SPRINGS: 41 TO 80 KGS
STRUT - SPORT
STRUT
UPPER STRUT BUSHES
STRUT TOP HAT KIT

REAR
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER

GREASABLE SHACKLE KIT


U BOLTS

QTY

2607
90003
N183S
2608
90003
N183S
OME3139
OMETH005

1
1

UNIT
PRICE $

2
1

ALL MODELS

Estimated Lift: 40mm

SPRING BUSH KIT

PART NUMBER

PART NUMBER
CS150R
60017
N185
OMESB99
OMESB100
CS151R
60017
N185
OMESB95
OMESB100
OMEGS15
OMEU53A

QTY

UNIT
PRICE $

2
2
2

2
2
2
3

1
4

REMARKS:
1

OE plastic stone shield must be refitted. No top mounting bushes supplied, use OME3139. OE bushes may be re-used if
in good condition.

CS150R: Use:
CS151R: Use:

OE U Bolt plate bolt holes may need to be enlarged when fitting OME U Bolts.

Strut Top Hat Kit may be required if original equipment is worn.

OMESB99 with OE Shackles.


OMESB95 with OE Shackles.

OMESB100 when installing OMEGS15.


OMESB964 when installing OMEGS15.

PAGE 74

SUZUKI
SIERRA / SAMURAI ALL LEAF SPRING MODELS (SJ413)
STD TRACK : 1984 - 1988
SJ50 SWB
SJ51 LWB

WIDE TRACK : 1988 - 1996


SJ70 SWB (also fits MG410)
SJ71 LWB (also fits MG410WT)

Note: MG410 & MG10WT are Indian built LWB Models.

FRONT
Estimated Lift: 40mm
SPRING: TO 25 KGS
NITROCHARGER
SPRING: 26 TO 75 KGS
NITROCHARGER
SPRING BUSH
U BOLTS
FITTING KIT
TRIM PACKER
STEERING DAMPER
EXTRA LEAF
CENTRE BOLT

1.0 LITRE
PART NUMBER
CS012FA / B
OME015
CS013FA / B
OME025
OMESB19
OMESB25
Required
FK06
TP05
OMESD30
D20XL
UCB7

REAR
Estimated Lift: 40mm

QTY
5

UNIT
PRICE $

4
1
1

PART NUMBER
CS012FA / B
OME025
CS013FA / B
OME025
OMESB19
OMESB25
Required
FK06
TP05
OMESD30
D20XL
UCB7

1+1
2
1+1
2

1.3 LITRE

ALL MODELS
PART NUMBER

SPRING: MEDIUM LOAD


NITROCHARGER
SPRING: CONSTANT 100 KGS
NITROCHARGER
SPRING BUSH KIT
U BOLTS
TRIM PACKER
EXTRA LEAF
CENTRE BOLT

CS038R
OME013
N43
CS039R
OME013
N43
OMESB19
OMESB25
Required
TP05
D21XL
UCB7

QTY

UNIT
PRICE $

4
2

REMARKS:
1

OMESB19 Bush Kit fits all Models except LJ50. OMESB25 Bush Kit only fits Model LJ50.

OME013 fits all Models except LJ80 and LJ80 II. N43 fits all LJ80 and LJ80 II Models.

88 To '96 1300cc Wide Track Models:


Front: D/S OMEU61 x 1, OMEU61B x 1
Rear: OMEU60 x 4

P/S OMEU60 x 2

84 To '88 1300cc STD Track Models:


Front: D/S OMEU61 x 1, OMEU61B x 1
Rear: OMEU62 x 4

P/S OMEU62 x 2

81 To '87 1000cc Models:


Front: D/S OMEU61 x 1, OMEU61B x 1
Rear: OMEU60 x 4

P/S OMEU60 x 2

FK06 kit required for Model with OE stabiliser bar. Refer OME Technical & Fitting Manual.

IMPORTANT: Sierras used in extreme heavy off road use eg. station mustering
must have CS013FA + B installed.

D20XL is suitable for CS012FA / B.

PAGE 75

QTY
5

1+1
2
1+1
2

4
1

1
6

UNIT
PRICE $

SUZUKI
SANTANA SAMURAI TO 2004 SWB & LWB MODELS

FRONT
Estimated Lift: 30 - 40mm
SPRING: TO 25 KGS - 40mm
NITROCHARGER
SPRING: 26 TO 75 KGS
XL LEAF
NITROCHARGER
SPRING BUSH
U BOLTS
CENTRE BOLT
STEERING DAMPER
TRIM PACKER

REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER
SPRING: CONSTANT 100KGS
XL LEAF
NITROCHARGER
SPRING BUSH KIT
U BOLTS
CENTRE BOLT
TRIM PACKER

1.3 LITRE PETROL


PART NUMBER
CS012FA / B
OME034
CS013FA / B
D20XL
OME034
OMESB19
OE

QTY
2

2
1

1.9 LITRE DIESEL

UNIT
PRICE $

PART NUMBER
CS013FA / B
OME034
CS013FA / B
D20XL
OME034
OMESB19
OE

1+1
2
1+1
2
2

OMEU60 OMEU61
LHS
RHS
UCB7
OMESD30
3
TP05

CS038R
OME035
CS039R
OME035
OMESB19
OE
OMEU60
TP05

UNIT
PRICE $

1+1
2
1+1
2
2
4
2
1

LWB MODEL
UNIT
PRICE $

PART NUMBER
CS039R
OME035
CS039R
D21XL
OME035
OMESB19
OE
OMEU60
UCB7
TP05

2
2
2
2

2
1

OMEU60 OMEU61
LHS
RHS
UCB7
3
OMESD30
TP05

2
1

QTY

2+2

SWB MODEL
PART NUMBER

QTY

QTY
2

2
4

UNIT
PRICE $

2
2
2

4
2

REMARKS:
1

Fitment of XL Leaf D20XL is recommended for weight in excess of 26kg on diesel Model & 75kg on petrol Model.

Front: LHS: OMEU60 x 2, RHS: OMEU61B x 2 required when fitting CS013FA/B


Rear: OMEU60 x 4 required when fitting CS039R

OMESD30 can be fitted to Models which have an OE steering damper.

Fitment of XL leaf D21XL is recommended for LWB Models with constant 100kg rear weight or OE hard top.

JIMNY SN413

FRONT
Estimated Lift: 40mm
SPRING: TO 35 KGS
NITROCHARGER
SPRING: 36 TO 85 KGS
NITROCHARGER

REAR
Estimated Lift: 40mm
SPRING:
NITROCHARGER
TRIM PACKER

4 CYLINDER PETROL ENGINE


PART NUMBER

QTY

2963
OME028
2965
OME028

1
2
1
2

UNIT
PRICE $

ALL MODELS
PART NUMBER
2966
2967
OME029
OMESJR10

QTY
1

DIESEL ENGINE
PART NUMBER

QTY

2965
OME028
2969
OME028

1
2
1
2

UNIT
PRICE $

REMARKS:

UNIT
PRICE $

1
2

PAGE 76

2966 suits right hand drive Models with a


20mm higher right hand side coil.
2967 suits left hand drive Models with
equal height coils.
If uncertain, compare original coil
heights.

TOYOTA
LANDCRUISER 200 SERIES WAGON*

FRONT
Estimated Lift: As Below
SPRING: NO WEIGHT: 25mm
LIFT
STRUT - SPORT
STRUT
SPRING: 100 KGS: 25mm LIFT
STRUT - SPORT
STRUT
SPRING: NO WEIGHT: 50mm
LIFT
STRUT - SPORT
STRUT
SPRING: 100 KGS: 50mm LIFT
STRUT - SPORT
STRUT
COIL PACKER
STRUT TOP HAT KIT
BP-51 SELECTION - ALL MODELS
COIL OVER LC200 FRONT LH
COIL OVER LC200 FRONT RH
BP KIT LC200 FRONT

REAR
Estimated Lift: As Below
SPRING: MEDIUM LOAD: LESS

ALL V8 DIESEL ENGINES


PART NUMBER

QTY

2700

90017
N208S
2701
91005
N208S
2702
90017
N208S
2703
91005
N208S
OME95PF5
OMETH003

PART NUMBER

QTY

2704

90017
N208S
2705
91005
N208S

2700

90017
N208S
2701
91005
N208S
OME95PF5
OMETH003

3
6

BP5190003L
BP5190003R
VM80010003

ALL MODELS
PART NUMBER

QTY

2720

61029
N209

LIFT
NITROCHARGER SPORT
NITROCHARGER
SPRING: MEDIUM LOAD: 20mm

2721

61029
N209

LIFT
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS:

2722

61029
N209

20mm
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 400 KGS:

2723

61030
N210

20mm
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 600 KGS:

61030
N210

TRIM PACKER
STONE GUARD KIT
BP-51 SELECTION
SHOCK LC200 REAR
BP KIT LC 200 REAR
BP KIT LC 200 KDSS REAR

2724

BP5160003
VM80010004
VM80010005

3
6

SELECTION HINTS:
*For Fitment to Models with Toyota's
KDSS (Kinetic Dynamic Suspension
System) fitted, please refer to OME's
Fitting Hints & Tips (OME Bulletin 70
LC200 KDSS Fitting Hints).

UNIT
PRICE $

REMARKS:
1

OME Coils and strut can only be


installed together due to different
winding of the lower coil end to suit
the OME coil seat. They are not
compatible with the OE Coil Seat.
Due to the nature of the KDSS,
Models fitted with KDSS may
experience a characteristic 10mm
to 15mm lean to the front right hand
side.

No top mounting bushes supplied,


re-use OE bushes.

To maintain ride height when front


accessory weight exceeds 100kgs,
OME95PF5 coil packer should be
installed, each OME95PF5 will
increase ride height by 10mm.

2725
61030
N210
OME80PR05
OME80PR10
OME661

UNIT
PRICE $

20mm
NITROCHARGER SPORT
NITROCHARGER
SPRING: MEDIUM LOAD: NO

20mm
NITROCHARGER SPORT
NITROCHARGER

UNIT
PRICE $

V8 PETROL ENGINE

2
4

2
5

ARMOURED
APPLICATION 4.5T is
available refer to page
15 for details
PAGE 77

OME661 Lower Shock Stone


Guards are recommended fitment
for protection against stone
damage.
When remaining stock of OME
P/No. is exhausted no further
product will be available.
Strut Top Hat Kit may be required if
original equipment is worn.

TOYOTA
LANDCRUISER 100 SERIES
INDEPENDENT FRONT SUSPENSION

FRONT

PETROL & DIESEL ENGINES


PART NUMBER
303001
1
303002
*60001 / 60000
N133
5
FK27

TORSION BARS: OVER 75 KGS


NITROCHARGER SPORT
NITROCHARGER
FITTING KIT

REAR
Estimated Lift: 10mm

QTY

UNIT
PRICE $

1
2
1

ALL MODELS 10/2000 ON


PART NUMBER

QTY

2860
60002
N101
2863
*60003 / 60002
N101
2864
60003
2866
2862
60002
N101
OME80PR05
OME80PR10
OME661

SPRING: MEDIUM LOAD


NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
STONE GUARD KIT

UNIT
PRICE $

2
1
2
1
2

1
2

2
3

10/98 TO 2000 V8 MODELS


PART NUMBER

QTY

2865
60002
N101
2866
*60003 / 60002
N101
OME80PR05
OME80PR10
OME661

1
6

UNIT
PRICE $

2
1

2
-

2
3

REMARKS:
1

Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
It is important that a minimum of 60mm of droop is maintained to prevent topping out of the front shock
absorbers. 303001 suits V8 Models. 303002 suits Turbo Diesel Models.
NB: In some Middle Eastern Countries, 6 Cylinder Petrol LandCruiser 100 Series (IFS) use the
longer turbo diesel torsion bars.

Packers must be installed on top of coils.

SPORT/NITROCHARGER FITMENT:
OME661 or OME662 (suits 40mm diameter control arms) Lower Shock Mount Stone Guard is recommended fitment to
rear shocks to protect against severe stone peppering encountered on loose road surfaces.

Original rear rake is 60mm approximately with OE coil rates of 145lbs/in or 25.5N/mm.
Customers wishing to lower the rear height but increase the load carrying ability can select from:
2866 - Reduces OE height by 10mm (rates 240 - 300lbs/in, 42 - 52.5N/mm)
2862 - Reduces OE height by 30mm (rates 240lbs/in, 42N/mm)

Due to the common problem of the lower control arm cracking when driven under hard conditions, the fitment
of a FK27 Lower Control Arm Reinforcing Bracket Kit is strongly recommended.

PAGE 78

TOYOTA
LANDCRUISER 105 SERIES & 80 SERIES WAGONS
LIVE AXLE FRONT SUSPENSION MODELS

FRONT
Estimated Lift: 10 - 50mm
SPRING: TO 50 KGS - 50mm
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KG-50mm
NITROCHARGER SPORT
NITROCHARGER
SPRING: TO 110 KGS - 10mm
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
STEERING DAMPER
CASTER KIT

REAR
Estimated Lift: 20 - 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 600 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: MEDIUM 20mm LIFT
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
STONE GUARD KIT

REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
STONE GUARD KIT

PETROL & DIESEL ENGINES


PART NUMBER

QTY

2851
60018
N73
2850
*60070 / 60018
N73
2861
60070
N73
OME80PF05
OME80PF10
OMESD24
OMECA77B

UNIT
PRICE $

2
1
2
1
2
2

ALL MODELS
PART NUMBER

QTY

2860
60020
*N74E / N71E
2863
60020
N74E
2864
60071
N74E
2868
60071
N74E
2862
60020
*N74E / N71E
OME80PR05
OME80PR10
OME661

1
4

REMARKS:

UNIT
PRICE $

OMECA77B Caster Kit will increase


caster angle by 3o. Check
manufacturer's specifications to
determine if OMECA77B kit is
required.

Packers must be installed on the


top of coil springs.
OME662 or OME661 Lower Shock
Mount Stone Guard is
recommended fitment to protect
against severe stone pepppering
encountered on loose road
surfaces. OME662 will only fit
Models with 40mm diameter control

2
1
2

1
2
1
2

1
4

2
3

LPG CONVERSION
PART NUMBER

QTY

2860
60020
*N74E / N71E
2863
60020
N74E
OME80PR05
OME80PR10
OME661

1
4

UNIT
PRICE $

2
1
2

2
3

PAGE 79

When remaining stock of N71E is


exhausted no further product will be
available.

OFF ROAD USE ONLY - TOYOTA


LANDCRUISER 80 & 105 SERIES

FRONT

PART NUMBER QTY

UNIT
PRICE $

COMMENTS

COILS
75mm LIFT - SPRING TO 50KG
75mm LIFT - SPRING 51 TO 110KG
100mm LIFT - SPRING TO 50KG
100mm LIFT - SPRING 51 TO 110KG
125mm LIFT - SPRING TO 50KG

SHOCKS
NITROCHARGER SPORT
NITROCHARGER SPORT

STEERING DAMPER
STABILISER

COMPONENTS
ADJUSTABLE PANHARD ROD
COIL SPRING TRIM PACKER
COIL SPRING TRIM PACKER

REAR

2418
3039
2419
3051
2420

1
1
1
1
1

220 lbf/in
300 lbf/in
220 lbf/in
300 lbf/in

60018L
60070L

2
2

Suits 75mm &100mm coils


Suits 75mm &100mm coils

OMESD24

PANR007
PAN3050
OME80PF05
OME80PF10

300 lbf/in

RHD only
LHD only
5mm

10mm

PART NUMBER QTY

UNIT
PRICE $

COMMENTS

COILS
75mm LIFT - MEDIUM
75mm LIFT - CONSTANT 200KG
75mm LIFT - CONSTANT 400KG
100mm LIFT - MEDIUM
100mm LIFT - CONSTANT 200KG
100mm LIFT - CONSTANT 400KG
125mm LIFT - MEDIUM

SHOCKS
NITROCHARGER SPORT
NITROCHARGER SPORT

COMPONENTS
ADJUSTABLE PANHARD ROD
HEAVY DUTY LOWER TRAILING ARMS
ADJUSTABLE UPPER TRAILING ARMS
TRIM PACKER

2421
3040
3049
2422
3043
3052
2423

1
1
1
1
1
1
1

280 lbf/in

60020L
60071L

2
2

Suit 75mm & 100mm coils


Suit 75mm & 100mm coils

PANR008
LTA3043
UTA3036
OME80PR05
OME80PR10

1
1
1

RHD & LHD

250 lbf/in
320 lbf/in

280 lbf/in
250 lbf/in
320 lbf/in

280 lbf/in

Standard Length
40mm on car adjustable
5mm, MUST be installed top of coil
10mm, MUST be installed top of coil

Notification: Modifications for off - road use only


The products listed in this selection chart are deemed by Old Man Emu to be suitable for off road use and their legality for
public road use should be certified by the relevant Registration Authority. An Off Road Use Only Disclaimer must be signed by
the customer.
Modifications and replacement of other associated components will be required.
Lift increase is approximate and will depend on vehicle weights.
Warranty Implications
The fitter selling these shocks must inform the customer there is no warranty due to the severe nature of
competition racing. The fitter must also note on the customer's receipt "racing application no warranty applies".
This will prevent any future misunderstanding.

PAGE 80

TOYOTA
PRADO 150 SERIES 2009 ON LWB4 COIL SPRUNG MODELS ONLY

FRONT
Estimated Lift: 30mm

V6 4.0L PETROL ENGINE


PART NUMBER

QTY

UNIT
PRICE $

SPRING: NO BAR
STRUT - SPORT
SPRING: BAR ONLY
STRUT - SPORT
SPRING: BAR AND WINCH
STRUT - SPORT
TRIM PACKER
UPPER STRUT BUSHES
STRUT TOP HAT KIT

2883
90010
2883
90010
2869
90010
OME95PF5
OME3133
OMETH002

FRONT

V6 4.0L PETROL ENGINE

Estimated Lift: 50mm


SPRING: NO BAR
STRUT - SPORT
SPRING: BAR ONLY
STRUT - SPORT
SPRING: BAR AND WINCH
STRUT - SPORT
TRIM PACKER
UPPER STRUT BUSHES
STRUT TOP HAT KIT
BP-51 SELECTION
BP-51 COIL OVER FRONT LH
BP-51 COIL OVER FRONT RH
BP-51 FIT KIT FRONT

REAR
Estimated Lift: 30mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
TRIM PACKER
STONE GUARD KIT

REAR
Estimated Lift: 50mm

5
2

1
2
1
2

2883
90010
2869
90010
2884
90010
OME95PF5
OME3133
OMETH002

1
2
1
2
1
2

2
6

QTY
1
2
1

2
1
2

UNIT
PRICE $

PART NUMBER

LWB MODELS
QTY

1
2
1
2
1
2

SPRING: MEDIUM LOAD


2889
60080
NITROCHARGER SPORT
SPRING: CONSTANT 200 KGS
2898
*60081 / 60080
NITROCHARGER SPORT
SPRING: CONSTANT 400 KGS
2899
60081
NITROCHARGER SPORT
OME150PR10
TRIM PACKER
OME661
STONE GUARD KIT
BP-51 SELECTION - ALL MODELS
BP-51 SHOCK REAR
BP5160002
BP-51 FIT KIT REAR
VM80010010

QTY

1
2
1
2
1
2

2
1

2
1
2

1
2
1
2
1
2

1
2
6

QTY

UNIT
PRICE $

REMARKS:

UNIT
PRICE $

Vehicles with KDSS, must have 1 x


OME95PF5 packer installed on the
front right hand side to maintain
correct trim.

No top mounting bushes supplied,


use OME3133. OE bushes may be
re-used if in good condition.

LWB MODELS
PART NUMBER

UNIT
PRICE $

2884
1
1
90010
2
2
2885
1
1
2
90010
2
1
2887
1
2
90010
2
1
OME95PF5
2
OME3133
6
OMETH002
KDSS MODELS
BP5190004L
BP5190002R
1
VM80010009

1
2
1
2
1
2

PART NUMBER

QTY

3.0L DIESEL ENGINE

BP5190002L
BP5190002R
VM80010008

2895E
60080
2895
*60081 / 60080
2896
60081
OME150PR10
OME661

PART NUMBER

PART NUMBER
2869
90010
2884
90010
2885
90010
OME95PF5
OME3133
OMETH002

3.0L DIESEL ENGINE

UNIT
PRICE $

2
1

PAGE 81

OME661 Lower Shock Mount Stone


Guard is recommended fitment to
rear shocks to protect against
severe stone peppering
encountered on loose road
surfaces.
For Fitment to Models with Toyota's
KDSS (Kinetic Dynamic Suspension
System) fitted, please refer to
OME's Fitting Hints & Tips (OME
Bulletin 70 LC200 KDSS Fitting
Hints).

When 2883 fitted to Petrol Model


ride height increase will be
approximately 40mm.

Strut Top Hat Kit may be required if


original equipment is worn.

TOYOTA
PRADO 150 SERIES SWB 2009 ON COIL SPRUNG MODELS ONLY

FRONT
Estimated Lift: 40mm
SPRING: NO BAR
STRUT - SPORT
SPRING: BAR ONLY
STRUT - SPORT
SPRING: BAR AND WINCH
STRUT - SPORT
TRIM PACKER
UPPER STRUT BUSHES
STRUT TOP HAT KIT

REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
TRIM PACKER
STONE GUARD KIT

V6 4.0L PETROL ENGINE


PART NUMBER
2883
90016
2869
*90010 / 90016
2884
90010
OME95PF5
OME3133
OMETH002

QTY
2

UNIT
PRICE $

3.0L DIESEL ENGINE


PART NUMBER
2869
90016
2884
*90010 / 90016
2885
90010
OME95PF5
OME3133
OMETH002

1
2
1
2
1
2

1
2
4

QTY
2

UNIT
PRICE $

1
2
1
2
1
2

1
2
4

WAGON MODELS
PART NUMBER
2895E
60086
2895
*60080 / 60086
2896
60080
OME150PR10
OME661

QTY

1
2
1
2
1
2

UNIT
PRICE $

REMARKS:
1

Vehicles with KDSS, must have 1 x OME95PF5 packer installed on the front right hand side to maintain correct trim.

No top mounting bushes supplied, use OME3133. OE bushes may be re-used if in good condition.

OME661 Lower Shock Mount Stone Guard is recommended fitment to rear shocks to protect against severe stone
peppering encountered on loose road surfaces.

Strut Top Hat Kit may be required if original equipment is worn.

PAGE 82

TOYOTA
PRADO 120 SERIES 4/2003 - 2009 LWB & SWB
EXCEPT TEMS MODEL (ELECTRONICALLY MODULATED SUSPENSION)

FRONT
Estimated Lift: 25mm
SPRING: TO 50 KGS
STRUT - SPORT
STRUT
SPRING: 51 TO 100 KGS
STRUT - SPORT
STRUT
SPRING: 101 TO 150 KGS
STRUT - SPORT
STRUT
TRIM PACKER
UPPER STRUT BUSHES
STRUT TOP HAT KIT

REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: 150 KGS - 400 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
STONE GUARD KIT

REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: 150KGS - 250KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
STONE GUARD KIT

PETROL & DIESEL ENGINES


PART NUMBER
2883
*90000 / 90021
N140S
2884
90000
*N201S / N140S
2885
90000
N201S
OME95PF5
OME3133
OMETH002

QTY
1

4
5

4
5

UNIT
PRICE $

LWB MODEL
PART NUMBER
2895E
2895
*60004 / 60112
N141
2896
*60005 / 60004
N202
2897
60005
N202
OME661

QTY
3

UNIT
PRICE $

1
2
5

2
1

2
5

SWB MODEL
PART NUMBER

QTY

2895E

*60004 / 60112
N141
2895
*60005 / 60004
N202
2896
60005
N202
OME661

UNIT
PRICE $

2
1

2
5

2
1

2
5

REMARKS:
1

To maintain front strut droop it is important front coils are selected as shown.

OME661 Lower Shock Mount Stone Guard is recommended fitment to rear shocks to protect against severe stone
peppering encountered on loose road surfaces.

2895E suits LWB Models without OE 2nd fuel tank. 2895 suits LWB Models with OE 2nd fuel tank.

No top mounting bushes supplied, use OME3133. OE bushes may be re-used if in good condition.

When remaining stock of N201S and N202 is exhausted no further product will be available.

Strut Top Hat Kit may be required if original equipment is worn.

PAGE 83

TOYOTA
PRADO 90 SERIES TO 10/2002 LWB

FRONT
Estimated Lift: 40mm
SPRING: TO 50 KGS
STRUT - SPORT
STRUT
SPRING: 51 TO 110 KGS
STRUT - SPORT
STRUT
TRIM PACKER
STRUT TOP HAT KIT

REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 150 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 300 KGS
NITROCHARGER SPORT
NITROCHARGER
TRIM PACKER
STONE GUARD KIT

V6 PETROL ENGINE
PART NUMBER
2880
90004
N91S
2881
90004
*N91SB / N91S
OME95PF5
OMETH008

QTY
1

DIESEL ENGINE

UNIT
PRICE $

PART NUMBER
2881
90004
N91S
2882
90004
*N91SB / N91S
OME95PF5
OMETH008

1
2

1
2

ALL MODELS
PART NUMBER

QTY

2890
60028
N86
2891
*60027 / 60028
N86
2892
60027
N86
OME80PF05
OME80PF10
OME661

1
2

UNIT
PRICE $

2
1

2
4

UNIT
PRICE $

1
2

1
2

REMARKS:

1
2

QTY

To maintain front strut droop it is


important front coils are selected as
shown.
OME661 Lower Shock Mount Stone
Guard is recommended fitment to
rear shocks to protect against
severe stone peppering
encountered on loose road
surfaces.
When remaining stock of N91SB is
exhausted no further product will be
available.
Strut Top Hat Kit may be required if
original equipment is worn.

TUNDRA 2007 ON

FRONT
Estimated Lift: 60mm
SPRING: NO BAR
STRUT SPORT
STRUT
SPRING: BAR ONLY
STRUT SPORT
STRUT
SPRING: BAR & WINCH
STRUT SPORT
STRUT
STRUT TOP HAT KIT

REMARKS:

PART NUMBER

QTY

2612
90018
N192S
2614
90018
N192S
2613
90018
N192S
OMETH003

1
2
2
1
2
2
1
2
2

UNIT
PRICE $

REAR
Estimated Lift: 60mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
XL LEAF
SPRING BUSH KIT
U BOLTS
FITTING KIT
GREASABLE SHACKLE KIT

PART NUMBER
CS055R
60100
N193
D28XL
OMESB106
OMEU53B
FK32
OMEGS22

QTY
2

UNIT
PRICE $

2
2
2
2
2
4
1
1

PAGE 84

No top mounting bushes supplied,


re-use OE bushes.

Models with rear sway bar will


require end link modifications to
retain sway bar in operation.

FK32 Brake Line and ABS Wire


Bracket Relocation Kit is a
mandatory fitment.

Strut Top Hat Kit may be required if


original equipment is worn.

TOYOTA
FJ CRUISER 2010 ON

FRONT
Estimated Lift: 50mm
SPRING: NO ACCESSORIES
NITROCHARGER SPORT
SPRING: TO 60 KGS
NITROCHARGER SPORT
SPRING: 60 TO 120 KGS
NITROCHARGER SPORT
TRIM PACKER
UPPER STRUT BUSHES
STRUT TOP HAT KIT
BP-51 SELECTION
BP-51 COIL OVER FRONT LH
BP-51 COIL OVER FRONT RH
BP-51 FIT KIT FRONT

REAR
Estimated Lift: 50mm
SPRING: LIGHT LOAD
NITROCHARGER SPORT
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
STONE GUARD KIT
BP-51 SELECTION
BP-51 SHOCK REAR
BP-51 FIT KIT REAR

REMARKS:

PART NUMBER
2883
*90010 / 90016
2884
90010
2885
90010
OME95PF5
OME3133
OMETH002

QTY
1

UNIT
PRICE $

1
2
1
2
1
2

1 No top mounting bushes supplied, use

OME3133. OE bushes may be reused if in good condition.

2 OME661 lower shock mount guard is

recommended fitment to rear shocks to


protect against severe stone peppering
encountered on loose road surfaces.

3 Strut Top Hat Kit may be required if

original equipment is worn.

1
3

BP5190002L
BP5190002R
VM80010008

ALL MODELS
PART NUMBER
2895E
*60080 / 60086
2895
*60081 / 60080
2896
60081
OME661

QTY
2

BP5160002
VM80010010

UNIT
PRICE $

1
2
1
2
1
2
1
2
1

FJ CRUISER 2006 TO 2010

FRONT
Estimated Lift: 50mm
SPRING: NO ACCESSORIES
STRUT - SPORT
STRUT
SPRING: TO 60 KGS
STRUT - SPORT
STRUT
SPRING: 60 TO 120 KGS
STRUT - SPORT
STRUT
TRIM PACKER
UPPER STRUT BUSHES
STRUT TOP HAT KIT

REAR
Estimated Lift: 50mm
SPRING: LIGHT LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
STONE GUARD KIT

REMARKS:

PART NUMBER

QTY

2883
*90000 / 90021
N140S
2884
90000
N140S
2885
90000
N140S
OME95PF5
OME3133
OMETH002

1
1

UNIT
PRICE $

recommended fitment to rear shocks to


protect against severe stone peppering
encountered on loose road surfaces.

3 Strut Top Hat Kit may be required if

original equipment is worn.

1
1

1
3

ALL MODELS
PART NUMBER

QTY

2895E
*60004 / 60112
N141
2895
*60004 / 60112
N141
2896
60081
OME661

UNIT
PRICE $

2
1
2

OME3133. OE bushes may be reused if in good condition.

2 OME661 lower shock mount guard is

2
1

1 No top mounting bushes supplied, use

1
2
1

PAGE 85

TOYOTA
FORTUNER 2004 ON

FRONT
Estimated Lift: 40mm
SPRING: TO 75 KGS
STRUT - SPORT
STRUT
SPRING: 76 TO 120 KGS
STRUT - SPORT
STRUT
TRIM PACKER
UPPER STRUT BUSHES
STRUT TOP HAT KIT

REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER

PART NUMBER

QTY

2883
*90002 / 90011
*N167S / N166S
2884
*90002 / 90011
N167S
OME95PF5
OME3133
OMETH002

1
1

UNIT
PRICE $

2
1

1
2

ALL MODELS
PART NUMBER

QTY

2802
60078
N191
2803
60077
N191

UNIT
PRICE $

2
1
2

REMARKS:
1

No top mounting bushes supplied, use OME3133. OE bushes may be re-used if in good condition.

Strut Top Hat Kit may be required if original equipment is worn.

PAGE 86

TOYOTA
LANDCRUISER 70 SERIES DUAL CAB

FRONT
Estimated Lift: 40mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 120 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
CASTER KIT
SWAY BAR SPACER KIT
TRIM PACKER
UPGRADED FRONT SWAY BAR
ABS WIRE BRACKET KIT
BP-51 SELECTION
BP-51 SHOCK FRONT
BP-51 FIT KIT FRONT

REAR
Estimated Lift:
All Models: 45mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 300 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 500 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 700 KGS
NITROCHARGER SPORT
BP-51 SELECTION
BP-51 SHOCK REAR
BP-51 SHOCK REAR LONG 682
BP-51 FIT KIT REAR
SPRING BUSH KIT
GREASABLE SHACKLE KIT
U BOLTS
SWAY BAR
SWAY BAR FIT KIT
BRAKE PROPORTIONING KIT
REAR BRAKE LINE DROP 2014 ON
EXTRA LEAF

PETROL & DIESEL


6 CYLINDER ENGINES
PART NUMBER

QTY

2856 6 9
60008
N181
2859 6 9
60008
N181
3
OMESD24
OMECA77B 1
FK19
4
OME79PF10
NOT APPLICABLE
FK65
9

BP5160009
VM80010006

2
1

UNIT
PRICE $

EL079R 5
60010
EL080R 5
60011 5
N197
EL081R 5
60011
5
N197
EL082R 5 7
60109 5 7

2
1
2
1
1
1
1

QTY
8

PART NUMBER
2859
6
60008
N181
2853
6
60008
N181
OMESD47
OMECA77B
FK19
OME79PF10
OMESTAB3
FK65

70 SERIES DUAL CAB


PART NUMBER

V8 DIESEL ENGINE

8
8

2
2

1
2

1
4
7
7
7

8
8
8

REMARKS:
1

OMECA77B Caster Kit will increase caster angle by 3 o. Check


manufacturer's specifications to determine if OMECA77B kit is required.

OMESB101: Use on original shackles and pins for 79. OMESB85: Use for
all Models when installing OME greasable shackles and pins

OMESD47 suits 2007 On Models (open length 750mm).

Should the front drive shaft contact the sway bar when the suspension is at
full droop, use FK19 Spacer Kit to pack the sway bar down.

Include tray weight in constant load calculation.

For heavily loaded applications it may be necessary to step down one spring
selection in the front to maintain correct rake.

PAGE 87

1
2

1
1
1

1
1

FK51 is Brake Proportioning Valve


Kit for medium load and 300kg
spring. FK58 is for 500kg and
700kg spring. Due to variance in
tray clearance on 70 Series Dual
Cab please check vehicle before
selecting Fit Kit.
For vehicles fitted with ABS brakes an
ABS Wire Bracket Kit must be fitted.

UNIT
PRICE $

BP5160010
BP5160017
VM80010007
OMESB101
OMESB85
OMEGS10
OMEGP7
OMEU59B
OMESTAB9
FK77
FK76
FK51
FK58
FK82
EL14XL

OMESTAB9 Sway Bar is highly


recommended fitment when 700kg
Constant Spring is used. Sway Bar
can also be fitted to lighter rated
springs to improve road handling.
FK76 suits Models with OE axle
sway bar mount. FK77 suits Models
without OE sway bar provision.

8
8

UNIT
PRICE $

8
8

QTY

TOYOTA
LANDCRUISER 76 SERIES WAGON

FRONT
Estimated Lift: 50mm
SPRING: TO 60 KGS
NITROCHARGER SPORT
SPRING: 61 TO 120 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
CASTER KIT
SWAY BAR SPACER KIT
UPGRADED FRONT SWAY BAR
ABS WIRE BRACKET KIT
BP-51 SELECTION
SHOCK LC 76 FRONT
BP KIT LC 76 FRONT

V8 DIESEL ENGINE
PART NUMBER
8
2856
60008
2859 8
60008 8
N181
OMESD47
OMECA77B
FK19
OMESTAB3
FK65

QTY
9

9
9

1
1
4
4
8

UNIT
PRICE $

1
2
1
2

REMARKS:
1

OMECA77B Caster Kit will increase


caster angle by 3o. Check
manufacturer's specifications to
determine if required.

Be sure to select OME Bush Kits


carefully:
OMESB85: Use for all Models when
installing OME greasable shackles
and pins.

1
1
1
1
1

OMESB86: Use when original


shackles and pins are used.
3

BP5160009
VM80010006

2
1
4

REAR
Estimated Lift: 50mm

ALL MODELS
PART NUMBER

QTY

SPRING: MEDIUM
NITROCHARGER SPORT
NITROCHARGER

CS057R
60010
N197

SPRING: CONSTANT 400 KGS

CS058R

NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 800 KGS
NITROCHARGER SPORT

*60111 / 60011
N197
CS070R 6
60111
OMESB86
OMESB85
OMEGS19
OMEGP7
FK38
OMEU59B
OMEU59D
UCB17
OME661
D35XL
OMESTAB9
FK77
FK76
FK51
FK58
FK82

SPRING BUSH KIT


GREASABLE SHACKLE KIT
ANTI-INVERSION KIT
U BOLTS
CENTRE BOLT
STONE GUARD KIT
EXTRA LEAF
SWAY BAR
SWAY BAR FIT KIT
BRAKE PROPORTIONING BRACKET
REAR BRAKE LINE DROP 2014 ON
BP-51 SELECTION
SHOCK LC 76 REAR
BP KIT LC 76 REAR
10

BP5160010
VM80010007

2
2

10

3
10

FK76 suits Models with OE sway bar


mount. FK77 suits Models without
sway bar provision. OMESTAB9 Sway
Bar is highly recommended when
800kg constant spring is used.

FK51 is Brake Proportioning Kit for


400kg spring. FK58 is for the 800kg
spring.

6
6

1
2
1

Use OMEU59B when fitting CS070R springs.

PAGE 88

OME661 Lower Shock Mount Stone


Guard is recommended fitment to rear
shocks to protect against severe stone
peppering encountered on loose road
surfaces.

2
1
2
1

Should the front drive shaft contact the


sway bar when the suspension is at full
droop, use FK19 Spacer Kit to pack the
sway bar down.

UNIT
PRICE $

2
5

To prevent springs from inverting it is


mandatory that either OMEGS19
Greasable Shackle Kit or FK38 AntiInversion Kit be installed.

For vehicles fitted with ABS brakes, an


ABS Wire Bracket Kit must be fitted.
For heavily loaded applications it may
be necessary to step down one spring
selection in the front to maintain correct
rake.

TOYOTA
LANDCRUISER 78 SERIES
PETROL & DIESEL
6 CYLINDER ENGINES

FRONT
Estimated Lift: 40mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 120 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
CASTER KIT
SWAY BAR SPACER KIT
TRIM PACKER
UPGRADED FRONT SWAY BAR
ABS WIRE BRACKET KIT
BP-51 SELECTION - ALL MODELS
SHOCK LC 78 FRONT
BP KIT LC 78 FRONT

PART NUMBER

QTY

2856
6 9
60008
N181
2859 6 9
60008
N181
OMESD24
5
OMESD47
OMECA77B 1
FK19
4
OME79PF10
NOT APPLICABLE
FK65
9

BP5160009
VM80010006

2
1

UNIT
PRICE $

2
1
2

OMECA77B
FK19
OME79PF10
OMESTAB3
FK65

Estimated Lift:
All Models: 45mm

PART NUMBER

400 KGS

600 KGS

800 KGS

SPRING BUSH KIT


GREASABLE SHACKLE KIT
U BOLTS
SWAY BAR
SWAY BAR FIT KIT
SWAY BAR EXTENSION BRACKET KIT
BRAKE PROPORTIONING KIT
EXTRA LEAF
REAR BRAKE LINE DROP 2014 ON
BP-51 SELECTION
SHOCK LC 78 REAR
BP KIT LC 78 REAR

EL079R
60010
EL080R
60011
N197
EL081R
60011
N197
EL082R
60109
OMESB86
OMESB85
OMEGS19
OMEGP7
OMEU59B
OMESTAB9
FK77
FK76
FK34
FK51
FK58
EL14XL
FK82
BP5160010
VM80010007

QTY

2
2

7
7
3

QTY
9

UNIT
PRICE $

1
2

1
2

OMESD47
1

78 SERIES TROOP CARRIER

200 KGS

PART NUMBER
2859
60008
N181
2853
60008
N181

REAR
SPRING: CONSTANT
NITROCHARGER SPORT
SPRING: CONSTANT
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT
NITROCHARGER SPORT

V8 DIESEL ENGINE

4
1
1
1
1
2
1
2
1

REMARKS:
1

OMECA77B Caster Kit will increase caster angle by 3 o. Check


manufacturer's specifications to determine if OMECA77B kit is required.

OMESB85: Use for all Models when installing OME greasable shackles and
pins. OMESB86: Use for Troop Carrier Models when original shackles and
pins are used.

FK34 Sway Bar Extension Bracket Kit must be installed to prevent damage
to sway bar mounts, due to increased suspension travel. FK34 not needed
if fitting OMESTAB9.

Should the front drive shaft contact the sway bar when the suspension is at
full droop, use FK19 Spacer Kit to pack the sway bar down.

OMESD24 suits pre 2007 Models (open length 651mm). OMESD47 suits
2007 On Models (open length 750mm).

PAGE 89

1
1

OMESTAB9 Sway Bar is highly


recommended fitment when 800kg
Constant Spring is used. Sway Bar
can also be fitted to lighter rated
springs to improve road handling.
FK76 suits Models with OE axle
sway bar mount. FK77 suits Models
without OE sway bar provision.

FK51 is Brake Proportioning Valve


Kit for 200kg and 400kg spring.
FK58 is for 600kg and 800kg spring.

For vehicles fitted with ABS brakes,


an ABS Wire Bracket Kit must be
fitted.

2
2

For heavily loaded applications it


may be necessary to step down one
spring selection in the front to
maintain correct rake.

2
2
2

UNIT
PRICE $

TOYOTA
LANDCRUISER 79 SERIES
PETROL & DIESEL
6 CYLINDER ENGINES

FRONT
Estimated Lift: 40mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 120 KGS
NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER
CASTER KIT
SWAY BAR SPACER KIT
TRIM PACKER
UPGRADED FRONT SWAY BAR
ABS WIRE BRACKET KIT
BP-51 SELECTION - ALL MODELS
SHOCK LC 79 FRONT
BP KIT LC79 FRONT

REAR

QTY

2856
6 9
60008
N181
2859 6 9
60008
N181
OMESD24
3
OMESD47
OMECA77B 1
FK19
4
OME79PF10
NOT APPLICABLE
FK65
9

BP5160009
VM80010006

2
1

UNIT
PRICE $

PART NUMBER
200 KGS
400 KGS

600 KGS

800 KGS

SPRING BUSH KIT


GREASABLE SHACKLE KIT
U BOLTS
SWAY BAR
SWAY BAR FIT KIT
BRAKE PROPORTIONING KIT
REAR BRAKE LINE DROP 2014 ON
EXTRA LEAF
BP-51 SELECTION
SHOCK LC 79 REAR
BP KIT 79 REAR

EL079R 5 8
60010
EL080R 5 8
60011
5 8
N197
EL081R 5 8
5 8
60011
N197
EL082R 5 7 8
60109 5 7 8
OMESB101
2
OMESB84
OMESB85
2
OMEGS10
OMEGP7
OMEU59B
OMESTAB9 7
FK77
7
FK76
7
FK51
8
FK58
10
FK82
EL14XL
BP5160009
VM80010007

PART NUMBER
2859
60008
N181
2853
60008
N181

2
1
2

QTY
9

UNIT
PRICE $

1
2

1
2

OMESD47
1

OMECA77B
FK19
OME79PF10
OMESTAB3
FK65

79 SERIES SINGLE CAB

Estimated Lift:
All Models: 45mm
SPRING: CONSTANT
NITROCHARGER SPORT
SPRING: CONSTANT
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT
NITROCHARGER SPORT

PART NUMBER

V8 DIESEL ENGINE

QTY

UNIT
PRICE $
7

2
2

2
8

2
2
1

2
2
1

REMARKS:
1

OMECA77B Caster Kit will increase caster angle by 3 o. Check


manufacturer's specifications to determine if OMECA77B kit is required.

OMESB101: Use on original shackles and pins for 79 Series Models from
07/2009 On. OMESB84: Use on original shackles and pins for 79 Series
Models To 06/2009. OMESB85: Use for all Models when installing OME
greasable shackles and pins.

OMESD24 suits pre 2007 Models (open length 651mm). OMESD47 suits
2007On Models (open length 750mm).

Should the front drive shaft contact the sway bar when the suspension is at
full droop, use FK19 Spacer Kit to pack the sway bar down.

Include tray weight in constant load calculation.

PAGE 90

For heavily loaded applications it


may be necessary to step down one
spring selection in the front to
maintain correct rake.
OMESTAB9 Sway Bar is highly
recommended fitment when 800kg
Constant Spring is used. Sway Bar
can also be fitted to lighter rated
springs to improve road handling.
FK76 suits Models with OE axle
sway bar mount. FK77 suits Models
without OE sway bar provision.
FK51 is Brake Proportioning Valve
Kit for 200kg and 400kg spring.
FK58 is for 600kg and 800kg spring.
Due to variance in tray clearance on
79 Series please check vehicle
before selecting Fit Kit.

For vehicles fitted with ABS brakes,


an ABS Wire Bracket Kit must be
fitted.

10

Required to be fitted to vehicles


from 10/14 on

TOYOTA
LANDCRUISER 75 SERIES

FRONT
Estimated Lift: 50mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
U BOLTS
SPRING BUSH KIT
GREASABLE SHACKLE KITS
STEERING DAMPER
ANTI INVERSION KIT
EXTRA LEAF
CENTRE BOLT

REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
SPRING: CONSTANT 600 KGS
NITROCHARGER SPORT
SPRING BUSH KIT
U BOLTS
GREASABLE SHACKLE KIT
ANTI INVERSION KIT
EXTRA LEAF
CENTRE BOLT

PETROL ENGINE
PART NUMBER
CS006F
60009
N92
CS006F
60063
OMEU51
OMESB1
OMEGS2
OMEGP1
OMESD24
FK08
D16XL
UCB5

QTY
2

6
2

2
2
5
5

UNIT
PRICE $

DIESEL ENGINE
PART NUMBER
CS006F
60009
N92
CS007F
60063
OMEU51
OMESB1
OMEGS2
OMEGP1
OMESD24
FK08
D16XL
UCB5

2
2
2
2
4
2
1
1
1
2
2

QTY
2

6
2

2
2
5

UNIT
PRICE $

2
2
2
2
4
2
1
1
1
2
2

ALL MODELS
PART NUMBER
CS006R
60010
CS007R
60011
CS008R
60011
OMESB16
OMEU59B
OMEGS1
OMEGP2
OMEGP4
FK08
D25XL
UCB4

QTY

UNIT
PRICE $

2
2
2
2
4

3
2

1
1
2
2

REMARKS:
1

Vehicles with no front accessory weight will require the removal of the 4th leaf from the top of the spring stack.
This is to maintain good shackle angle by not allowing the bump stop measurement to exceed 100mm.

Shackles: FK08 Anti Inversion Kit is mandatory fitment front and rear if greasable shackles are not fitted.

There can be 2 spigot sizes in the rear fixed end pins on 75 Series LandCruisers.
Check for correct size before ordering greasable pins. Part numbers are:
50mm spigot = OMEGP2.
51mm spigot = OMEGP4.

Include tray weight in constant load calculation.

D16XL suitable for CS006F.

When remaining stock of N92 is exhausted no further product will be available.

Note: Spring Caster Wedge OMECW2 (2 o Caster Wedges) may be required to restore positive caster
Front end alignment check will indicate required adjustment.

PAGE 91

TOYOTA
LANDCRUISER HZJ71 & HZJ74 SWB & MWB

FRONT
Estimated Lift: 50mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
STEERING DAMPER
CASTER KIT

REAR
Estimated Lift: 60mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 250 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
U BOLTS
GREASABLE SHACKLE KITS
EXTRA LEAF
CENTRE BOLT

DIESEL 4.2 ENGINES


PART NUMBER

QTY

2856
60008
2859
60008

1
2
1
2

OMESD24

OMECA77B

UNIT
PRICE $

CS017RB
60044
CS004RB
2
60044
60043
OMESB93
OMEU59A
OMEGS10
OMEGP7
D2XL
UCB2

UNIT
PRICE $

2
2
2
2

2
4

2
2

LANDCRUISER II WAGON

FRONT
Estimated Lift: 30mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER

REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 100 KGS
NITROCHARGER SPORT
NITROCHARGER

PART NUMBER

QTY

2872
60089
N77
2874
60089
N77

UNIT
PRICE $

2
1
2

ALL MODELS
PART NUMBER

QTY

2873
60090
N79
2875
60090
N79

UNIT
PRICE $

2
1
2

PAGE 92

OMECA77B caster kit will increase


caster angle by 3o. Check
manufacturer's specifications to
determine if OMECA77B kit is
required.
If rear bump stop measurements
exceed 150mm remove 3rd leaf.

OME greasable shackles OMEGS10 &


OMEGP7 are mandatory fitment. OE
shackles cannot be used.

D2XL extra leaf and UCB2 centre


bolt suitable for CS004RB spring.

QTY

2 3

ALL MODELS
PART NUMBER

REMARKS:

TOYOTA
BUNDERA RJ70 11/1984 - 1990

FRONT
Estimated Lift: 40mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT

REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER

PETROL & DIESEL ENGINES


PART NUMBER

QTY

2870
60094
2876
60094

1
2
1
2

UNIT
PRICE $

ALL MODELS
PART NUMBER

QTY

2871
60095
60096
N112
N113

1
1

UNIT
PRICE $

REMARKS:
1

N1122 / 60095 fits left hand side.


N1132 / 60096 fits right hand side.

When remaining stock of N113 is


exhausted no further product will be
available.

LANDCRUISER 70, 73, 74 SERIES SWB & MWB

FRONT
Estimated Lift: 50mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
SPRING BUSH KIT
U BOLTS
GREASABLE SHACKLE KITS
STEERING DAMPER
ANTI INVERSION KIT

REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
U BOLTS
GREASABLE SHACKLE KITS
ANTI INVERSION KIT
EXTRA LEAF
CENTRE BOLT

PETROL & DIESEL ENGINES


PART NUMBER
CS006F
60009
N92
CS006F
60009
OMESB1
OMEU51
OMEGS2
OMEGP1
OMESD24
FK08

QTY

UNIT
PRICE $

Vehicles with no front accessory


weight will require the removal of the
4th leaf from the top of the spring
stack. This is to maintain good
shackle angle by not allowing the
bump stop measurement to exceed
100mm.

If bump stop measurement exceeds


150 - 160mm remove 3rd leaf from
top of spring stack to prevent shock
absorber from topping out.

Shackles: FK08 Anti Inversion Kit is


mandatory fitment front and rear if
greasable shackles are not fitted.
Note: Spring Caster Wedge
OMECW2 (2o Caster Wedges) may
be required to restore positive
caster angle. Front end alignment
check will indicate required
adjustment.
There can be 2 spigot sizes of the
rear fixed end pins. Check spigot
size before ordering greasable pins.

2
2
4
1
3

ALL MODELS
PART NUMBER

REMARKS:

QTY

UNIT
PRICE $

CS017RA / B 3 1 + 1
60062
2
N85
CS004RA / B 2 3 6 1 + 1
60062
2
N85
OMESB1
2
OMEU59A
4
OMEGS2
OMEGP2
4
1
OMEGP4
FK08
3
D2XL
6
2
UCB2

50mm spigot = OMEGP2


51mm spigot = OMEGP4

PAGE 93

When remaining stock of N92 is


exhausted no further product will be
available.

D2XL extra leaf and UCB2 centre


bolt suitable for CS004RA/B springs.

TOYOTA
LANDCRUISER 60, 61 & 62 SERIES

FRONT
Estimated Lift: 50mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
SPRING BUSH KIT
U BOLTS
GREASABLE SHACKLE KITS
STEERING DAMPER
ANTI INVERSION KIT
EXTRA LEAF
CENTRE BOLT

REAR
Estimated Lift: 50mm
SPRING: RIDE/LIGHT LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
FITTING KIT
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
FITTING KIT
SPRING BUSH KIT
U BOLTS
GREASABLE SHACKLE KITS
ANTI INVERSION KIT
EXTRA LEAF
CENTRE BOLT

PETROL ENGINE
PART NUMBER
CS003F
60009
N92
CS004F
60063
OMESB1
OMEU51
OMEGS2
OMEGP1
OMESD24
FK08
D1XL
UCB3

QTY
2

8
1

UNIT
PRICE $

PART NUMBER
CS004F
60009
CS005F
60063
OMESB1
OMEU51
OMEGS2
OMEGP1
OMESD24
FK08
D1XL
UCB3

2
2
2
2
2
4
1

2
7

1
1
2
2

ALL MODELS
PART NUMBER
CS017RA / B 2
60032
60062
N94
N95
CS004RA / B 2
*60064 / 60032
*60065 / 60062
*N90 / N85
*N42 / N89
FK0422
FK0411
CS005RA / B 2
60064
60065
N90
N42
FK0418
OMESB1
OMEU59B
OMEGS1
OMEGP1
FK08
D2XL
UCB2

DIESEL ENGINE

QTY
5

UNIT
PRICE $

1+1

2
7

1
1
2
2

Post 1986 vehicles have a 19mm


mounting pin and suit shock part no's
N94, N908, N85, 60062 & 60065.

2
1
2
4

Fitting Kit is only required on vehicles


with rubber insulators around rear
springs. Refer OME Technical & Fitting
Manual Section 7 GFI: LandCruiser 60
Series page 7 selection chart.

Barn door Models may require A/A or


B/B spring fitment. USA LHD Models
require A/A or B/B spring fitment.

D2XL only suitable for CS004RA/B &


CS005RA/B.

D1XL only suitable for CS003F &


CS004F.

When remaining stock of N90 and N92


is exhausted no further product will be
available.

1
2

2
2
2
4

Pre 1986 vehicles have a 16mm


mounting pin and suit shock part no's
N95, N42, N89, 60032 & 60064.

3
8
3

Shackles: FK08 Anti Inversion Kit is


mandatory fitment if greasable
shackles are not fitted. Refer OME
Technical & Fitting Manual.

1+1

Front bump stop measurement must


not exceed 100mm to ensure good
shackle angle. To reduce bump stop
gap, remove the 4th leaf from the top of
the spring. OMECW2 Caster Wedge
Kit may be required to restore correct
caster angle.

1+1

8
3

UNIT
PRICE $

REMARKS:

QTY

1
2
2

PAGE 94

TOYOTA
LANDCRUISER 45, 47 SERIES ALL LWB MODELS

FRONT

PETROL & DIESEL ENGINES

Estimated Lift: 35mm

PART NUMBER

SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT

CS001F
60097
N81
CS002F
60097
*N41 / N81
See Chart Below
OMEU59A
OMEU59B
OMEU59A
OMEU55
See Chart Below
OMESD23
FK08
D3XL
UCB8

U BOLTS - 25mm Eye Spring


U BOLTS - 35mm Eye Spring
GREASABLE SHACKLE KITS
STEERING DAMPER
ANTI INVERSION KIT
EXTRA LEAF
CENTRE BOLT

REAR

QTY

UNIT
PRICE $

2
1

2
2
3
1
3
1

REMARKS:

1
2

ALL MODELS

Estimated Lift: 50mm

PART NUMBER

SPRING: MEDIUM LOAD


NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
U BOLTS
TRIM PACKER
GREASABLE SHACKLE KITS
ANTI INVERSION KIT
EXTRA LEAF
CENTRE BOLT

CS003R 1
60032
N42
CS003R 1
60064
N42
See Chart Below
OMEU59B
TP02
See Chart Below
FK08
D8XL
UCB4

QTY

FK08 Anti Inversion Kit is


mandatory fitment front and rear if
greasable shackles are not fitted.

Remove 3rd leaf from CS003R


spring stack to reduce spring rate
for light duty application. Include
tray weight in constant load
calculation.

UNIT
PRICE $

2
2

2
2
4

1
2

GREASABLE SHACKLES
KIT PART
FRONT
NO.
18mm Shackle Pins & 35mm OMEGS2
Hanger Bracket
OMEGP1
15mm Shackle Pins & 25mm OMEGS8
Hanger Bracket
OMEGP8

QTY

Compatible Bush
UNIT
Kit
PRICE $

QTY

OMESB1

OMESB30

1
2

OMESB79

OMESB30

REAR
18mm Shackle Pins & 30mm OMEGS17
Hanger Bracket
*GSP02
15mm Shackle Pins & 25mm OMEGS9
Hanger Bracket
OMEGP8

* GSP02 is only a greasable pin replacement for original pin.

PAGE 95

UNIT
PRICE $

TOYOTA
LANDCRUISER 40, 42 SERIES SWB

FRONT

PETROL & DIESEL ENGINES

Estimated Lift: 35mm

PART NUMBER

SPRING: TO 50 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
NITROCHARGER

CS001F
60097
N81
CS002F
60097
N41
OMESB30
OMESB1
OMEU59A
OMEU59B
OMEU59A
OMEU55
See Chart Below
OMESD23
FK08
D3XL
UCB8

SPRING BUSH KIT


U BOLTS - 25mm Eye Spring
U BOLTS - 35mm Eye Spring
GREASABLE SHACKLE KITS
STEERING DAMPER
ANTI INVERSION KIT
EXTRA LEAF
CENTRE BOLT

REAR

REMARKS:
1

OMESB30 suits 35mm spring eye


and 25mm hanger bracket with
15mm shackle pin hole.

FK08 Anti Inversion Kit is mandatory


fitment front and rear if greasable
shackles are not fitted.

1975 and newer FJ 40's may need


to use N76 shocks in rear:

QTY

UNIT
PRICE $

Pre 1975 shock eye in the top of the


axle housing: Use N89 / N95 /
60032 / 60064

2
3
1
3
1

Post 1975 lower shock eye is below


leaf spring: Use N76 with OMEB11
Bush Kit

1
2

ALL MODELS

Estimated Lift: 50mm

PART NUMBER

SPRING: MEDIUM LOAD


NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 150 KGS
NITROCHARGER SPORT
NITROCHARGER
U BOLTS
SPRING BUSH KIT
GREASABLE SHACKLE KITS
ANTI INVERSION KIT
EXTRA LEAF
CENTRE BOLT

CS001R
60032
*N89 / N95
CS002R
*60064 / 60032
N89
OMEU59A
OMESB30
OMESB1
See Chart Below
FK08
D4XL
UCB8

QTY

UNIT
PRICE $

2
3

2
4

1
2

GREASABLE SHACKLES
FRONT
18mm Shackle Pin
15mm Shackle Pin

KIT PART
NO.
OMEGS2
OMEGP1
OMEGS8
OMEGP8

QTY

Compatible Bush
UNIT
Kit
PRICE $

QTY

OMESB1

OMESB30

OMESB1

OMESB30

REAR
18mm Shackle Pin
15mm Shackle Pin

OMEGS1
OMEGP1
OMEGS9
OMEGP8

PAGE 96

UNIT
PRICE $

TOYOTA
TACOMA V6 2005 ON

FRONT
Estimated Lift: 50mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
STRUT
SPRING: 51 TO 100 KGS
NITROCHARGER SPORT
STRUT
UPPER STRUT BUSHES
STRUT TOP HAT KIT

REAR
Estimated Lift: 55mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
U BOLT
SPRING BUSH KIT
DRIVESHAFT SPACER KIT
EXTRA LEAF
CENTRE BOLT

PART NUMBER

QTY

2885
*90000 / 90021
N140S
2886
90000
N140S
OME3133
OMETH002

1
1

UNIT
PRICE $

2
1

1
2

ALL MODELS
PART NUMBER

QTY

CS047R
60091
N182
OMEU53A
OMESB108
FK29
D29XL
UCB17

UNIT
PRICE $

2
4
2
1
2

REMARKS:
1

No top mounting bushes supplied, use OME3133. OE bushes may be re-used if in good condition.

Strut Top Hat Kit may be required if original equipment is worn.

TACOMA V6 & 4 CYLINDER 1998 - 2004

FRONT
Estimated Lift: 45mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
STRUT
SPRING: 51 TO 100 KGS
NITROCHARGER SPORT
STRUT

REAR
Estimated Lift: 55mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
GREASABLE SHACKLE KIT
EXHAUST BRACKET KIT

PART NUMBER

QTY

2880
90004
N91SC
2881
90004
N91S

1
3

UNIT
PRICE $

2
1
2

ALL MODELS
PART NUMBER
CS046RA / B
*60065 / 60062
N85
OMESB88
OMESB89
OMEGS12
FK21

QTY
2

UNIT
PRICE $

1+1
2

1
1

REMARKS:
1

OMESB88 must be used with OMEGS12 greasable shackles.


OMESB89 must be used with original shackles.

FK21 Exhaust Bracket is mandatory fitment to ensure exhaust system clears springs.

When remaining stock of N91SC is exhausted no further product will be available.

PAGE 97

TOYOTA
HILUX/VIGO 2005 ON ALL MODELS

FRONT
Estimated Lift: 30mm
SPRING: TO 75 KGS
STRUT - SPORT
STRUT
SPRING: BAR ONLY
STRUT - SPORT
STRUT
SPRING: BAR & WINCH
STRUT - SPORT
STRUT
TRIM PACKER
UPPER STRUT BUSHES
STRUT TOP HAT KIT
BP-51 SELECTION
COIL OVER HILUX FRONT LH
COIL OVER HILUX FRONT RH
BP KIT HILUX FRONT

REAR
Estimated Lift: 45mm
SPRING: LOW LIFT 20mm
NITROCHARGER SPORT
NITROCHARGER
SPRING: LIGHT LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 600 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
U BOLTS
GREASABLE SHACKLE KIT
BRAKE PROPORTIONING BRACKET
EXTRA LEAF
BP-51 SELECTION
SHOCK ABSORBER HILUX REAR LH
SHOCK ABSORBER HILUX REAR RH
BP KIT HILUX REAR

DIESEL ENGINES
PART NUMBER
2883
*90002 / 90011
*N167S / N166S
2884
90002
N167S
2885
90002
N167S
OME95PF5
OME3133
OMETH002

QTY
1

UNIT
PRICE $

PART NUMBER
3058
*90002 / 90011
*N167S / N166S
2883
*90002 / 90011
*N167S / N166S
2884
90002
N167S
OME95PF5
OME3133
OMETH002

2
5

BP5190001L
BP5190001R
VM80010001

PETROL ENGINES
QTY
1

UNIT
PRICE $

2
5

ALL MODELS
PART NUMBER
CS043R-15
60006
N168
EL043R
60006
N168
EL044R
60006
*N169 / N168
EL045R
60007
N169
EL071R
60007
N169
OMESB98
OMEU53A
OMEGS14
FK59
EL13XL
BP5160001L
BP5160001R
VM80010002

QTY

UNIT
PRICE $

2
3

2
3

2
3

2
3

2
2
4
1
4

REMARKS:
To maintain coil clearance from the sway bar, the coil seat must be installed with the helix facing away from the sway
1
bar.
No top mounting bushes supplied, use OME3133. OE bushes may be re-used if in good condition.
2
3

Include tray weight in constant load calculation.

EL13XL will give approximately 22mm extra lift or increase loading capacity at design height by approximately 200kgs.

Strut Top Hat Kit may be required if original equipment is worn.

PAGE 98

TOYOTA
HILUX/TIGER 1997 - 2004 ALL MODELS

FRONT

PETROL & DIESEL ENGINES


PART NUMBER

TORSION BARS: OVER 50 KGS


NITROCHARGER SPORT
STEERING DAMPER

REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 120 KGS
NITROCHARGER SPORT
SPRING: CONSTANT 250 KGS
NITROCHARGER SPORT
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
SPRING BUSH KIT
GREASABLE SHACKLE KIT
ANTI INVERSION KIT
U BOLT
FITTING KIT
EXTRA LEAF
CENTRE BOLT

303003
60042
OMESD33

QTY
1

UNIT
PRICE $

1
2
1

ALL MODELS
PART NUMBER
CS018R 3
60043 + 60044
CS019R 3
60043 + 60044
CS020R 3
60043 + 60044
CS021R 3
60043 + 60044
OMESB43
OMEGS7
FK15
OMEU53A
FK01
D6XL
UCB6

QTY
5
2
5
2
5

2
5

2
1+1
2
1+1
2
1+1
2
1+1
2

4
1

UNIT
PRICE $

REMARKS:
1

Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.

60043 is longer in length and must be fitted to right hand side only. Fitment to left hand side may cause
damage to shock absorber and vehicle.

Mandatory Fitment: Either OMEGS7 or FK15 Anti Inversion Kit required to prevent possible spring inversion.

Fitment of FK01 Spacer Washers to U bolts is required to ensure correct tension is obtained on U bolts.
Include tray weight in constant load
calculation.
D6XL suitable for CS019R, CS020R and CS021R.

5
6

PAGE 99

TOYOTA
HILUX & 4 RUNNER PRE 1997 ALL LEAF SPRING MODELS

FRONT
Estimated Lift: 45mm
SPRING: TO 50 KGS
NITROCHARGER SPORT
SPRING: 51 TO 110 KGS
NITROCHARGER SPORT
SPRING BUSH KIT
U BOLTS
FITTING KIT
GREASABLE SHACKLE KITS
STEERING DAMPER
EXTRA LEAF
CENTRE BOLT

REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 250 KGS
NITROCHARGER SPORT
NITROCHARGER
U BOLTS
SPRING BUSH KIT
GREASABLE SHACKLE KITS
TRIM PACKER
ANTI INVERSION KIT
EXTRA LEAF
CENTRE BOLT

PETROL ENGINES
PART NUMBER
CS008FA / B 1
60061
CS009FA / B 1
60061
OMESB5
OMEU52 +
OMEU53B
FK03
OMEGS4
OMEGP3
OMESD21
D17XL
UCB7

QTY

2 3

UNIT
PRICE $

1+3
1

1
2

ALL MODELS

CS009R 4 6
*60064 / 60032
*60065 / 60062
*N85 / N94
*N89 / N95
CS010R 4 6
60064
60065
N85
N89
OMEU53
OMESB6
OMEGS3
OMEGP3
TP04
FK09
FK13
D5XL
UCB6

QTY
7

PART NUMBER
CS009FA / B 1
60061
CS009FA / B 1
60061
OMESB5
OMEU52 +
OMEU53B
FK10
OMEGS4
OMEGP3
OMESD21
D17XL
UCB7

1+1
2
1+1
2
2

PART NUMBER

DIESEL ENGINES

UNIT
PRICE $

2
5

2
3

2
5

4
2

4
6

UNIT
PRICE $

1+1
2
1+1
2
2
1+3
2
1
1
2

REMARKS:

QTY

1
2
6

PAGE 100

A/A spring fitment may be needed


on some vehicles for trimming
purposes.
Petrol HiLux may require FK03
(Saddle Correction Plates) if the
spring seats are distorted. FK10
must be fitted to all Diesel & Petrol
Models used off road. Refer OME
Technical & Fitting Manual.
OMEU52 is required when fitting
OME springs to stop the U bolt
contacting the drag link. Refer OME
Technical & Fitting Manual.
A trim packer may be required to
trim vehicle. Only to be used on
rear springs.
Post 1984 vehicles have a 19mm
mounting pin and suit shock part
numbers: N85, N94, 60062 and
60065. Pre 1984 vehicles have a
16mm mounting pin and suit shock
part numbers: N89, N95, 60032 and
60064.
If greasable shackles are not fitted
Anti Inversion Kits must be fitted.
FK09 fits all pre 1984 Models.
FK13 fits all 1985 Models On.
Include tray weight in constant load
calculation. To provide correct
shackle angle, 1985 - 89 automatic
4 Runner Models require the 3rd
leaf to be removed to reduce spring
rate.

TOYOTA
HILUX PRE 1997 EXTRA CAB & DUAL CAB SR5
IFS & REAR LEAF MODELS

FRONT

PETROL & DIESEL ENGINES


PART NUMBER

TORSION BARS: 50 KGS


NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER

REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
U BOLTS
GREASABLE SHACKLE KIT
EXTRA LEAF
CENTRE BOLT

303003
60072
N98
OMESD33

QTY
1

UNIT
PRICE $

1
2
1

ALL MODELS
PART NUMBER
CS019R
60065
*N85 / N94
CS020R
60065
*N85 / N94
OMESB43
OMEU53
OMEU53B
OMEGS7
D6XL
UCB6

QTY

REMARKS:

UNIT
PRICE $

Raise or lower front end clearance


and trim vehicle by adjusting front
torsion bars.

Compare original spring stack


height to OME spring stack to
decide whether OMEU53 or
OMEU53B U bolts are required.

Include tray weight in constant load


calculation.

2
2

2
2
2

4
1
2

4 RUNNER 2010 ON (USA MODEL)

FRONT
Estimated Lift: 50mm
SPRING: NO BAR
STRUT - SPORT
SPRING: BAR ONLY
STRUT - SPORT
SPRING: BAR AND WINCH
STRUT - SPORT
TRIM PACKER
UPPER STRUT BUSHES
STRUT TOP HAT KIT

REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
TRIM PACKER
STONE GUARD KIT

V6 4.0L PETROL ENGINE


PART NUMBER
2883
90010
2884
90010
2885
90010
OME95PF5
OME3133
OMETH002

QTY
1
2

1
2

1
2

UNIT
PRICE $

1
2
1
2
1
2

Vehicles with KDSS, must have 1 x


OME95PF5 packer installed on the
front right hand side to maintain
correct trim.

No top mounting bushes supplied,


use OME3133. OE bushes may be
re-used if in good condition.

OME661 Lower Shock Mount Stone


Guard is recommended fitment to
rear shocks to protect against
severe stone peppering
encountered on loose road
Strut Top Hat Kit may be required if
original equipment is worn.

1
2
4

LWB MODEL
PART NUMBER
2895
60080
2896
*60081 / 60080
2897
60081
OME150PR10
OME661

REMARKS:

QTY

1
2
1
2
1
2

UNIT
PRICE $

PAGE 101

TOYOTA
4 RUNNER 2003 TO 2010 (USA MODEL)

FRONT
Estimated Lift: 25-50mm
SPRING: NO BAR
STRUT - SPORT
STRUT
SPRING: TO 75 KGS
STRUT - SPORT
STRUT
TRIM PACKER
UPPER STRUT BUSHES
STRUT TOP HAT KIT

PART NUMBER
2884
90000
N140S
2885
90000
N140S
OME95PF5
OME3133
OMETH002

QTY
1

UNIT
PRICE $

2
3

REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 150 KGS
NITROCHARGER SPORT
SPRING: CONSTANT 300 KGS
NITROCHARGER SPORT
STONE GUARD KIT

PART NUMBER

QTY

2895
60004
N141
2896
*60005 / 60004
2897
60005
OME661

UNIT
PRICE $

2
1
2
1
2
1

REMARKS:
1

OME front coils can only be installed with OME Nitrocharger strut and coil seats.

No top mounting bushes supplied, use OME3133. OE bushes may be re-used if in good condition.

Strut Top Hat Kit may be required if original equipment is worn.

4 RUNNER 1996 - 2002 (USA MODEL)

FRONT
Estimated Lift: 30mm
SPRING: TO 50KGS
SPRING: 51 TO 100KGS
NITROCHARGER SPORT
NITROCHARGER

REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
SPRING: CONSTANT 250KGS
NITROCHARGER SPORT
NITROCHARGER

PETROL & DIESEL ENGINES


PART NUMBER

QTY

2880
2881
90004
N91S

1
1

UNIT
PRICE $

ALL MODELS
PART NUMBER

QTY

2906
2890
*60027 / 60028
N86

1
1

UNIT
PRICE $

PAGE 102

TOYOTA
4 RUNNER 1990 - 1996 (TO 1995 IN USA)
IFS REAR COIL SPRING MODELS

FRONT

PETROL & DIESEL ENGINES


PART NUMBER

TORSION BARS: OVER 50 KGS


NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER

REAR
Estimated Lift: 40mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 150 KGS
NITROCHARGER SPORT
NITROCHARGER

303003
60072
N98
OMESD33

QTY
1

UNIT
PRICE $

1
2
1

ALL MODELS
PART NUMBER

QTY

2900
60073
N72F
2901
60073
N72F

UNIT
PRICE $

2
1
2

REMARKS:
1

Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.

4 RUNNER 1986 - 1990 (TO 1989 IN USA)


IFS REAR LEAF SPRING MODELS

FRONT

PETROL & DIESEL ENGINES


PART NUMBER

TORSION BARS: OVER 50 KGS


NITROCHARGER SPORT
NITROCHARGER
STEERING DAMPER

REAR
Estimated Lift: 50mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
NITROCHARGER
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
NITROCHARGER
SPRING BUSH KIT
U BOLTS
GREASABLE SHACKLE KITS
EXTRA LEAF
CENTRE BOLT

303003
60072
N98
OMESD33

QTY
1

UNIT
PRICE $

REMARKS:
1

1
2

Compare original spring stack


height to OME spring stack to
decide whether OMEU53 or
OMEU53B U bolts are required.

Install OE caster wedges from OE


spring stack onto OME springs.
Ensure wedges are fitted as per
original position.

ALL MODELS
PART NUMBER
CS009R
60065
*N85 / N94
CS010R
60065
N85
OMESB6
OMEU53
OMEU53B
OMEGS3
OMEGP3
D5XL
UCB6

QTY

UNIT
PRICE $

2
2

2
2
2

4
1
2

PAGE 103

Raise or lower front end clearance


and trim vehicle by adjusting front
torsion bars.

VOLKSWAGEN
AMAROK 2010 ON ALL MODELS

FRONT
Estimated Lift: 20mm
SPRING: NO BAR
STRUT - SPORT
SPRING: BAR
STRUT - SPORT
SPRING: BAR & WINCH
STRUT - SPORT
TRIM PACKER

REAR
Estimated Lift: 20mm
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
SPRING: CONSTANT 400 KGS
NITROCHARGER SPORT
SPRING BUSH KIT
STONE GUARD KIT
U BOLTS - MEDIUM SPRING
U BOLTS - CONSTANT 400KGS SPRING
EXTRA LEAF

DIESEL ENGINE
PART NUMBER
3079
90012
3080
90013
3080
90013
OME95PF5

QTY

UNIT
PRICE $

1
2
1
2
1
2

DIESEL ENGINE
PART NUMBER
CS064R
60082
CS065R
60083
OMESB104
OME665
OMEU59A
OMEU59B
D38XL

QTY
3
4
3
4
3

UNIT
PRICE $

2
2
2
1
4

REMARKS:
1

Top mount bump stop and bushes not supplied, re-use OE items.

For trimming purposes only, maximum 1 packer per strut.

Workshop fitting kit FK33 recommended for easier bush install (note: one FK33 kit required per workshop).

OME665 Lower Shock Mount Stone Guard is mandatory fitment to rear shocks to protect against severe stone peppering
encountered on loose rood surfaces.

D38XL will give approximately 12mm extra lift or increase loading capacity at design height by approximately 160kgs.

Fitting Time: Due to the complexity of installation allow 5 hours for complete install.

PAGE 104

YEAR

DAIHATSU
F Series All Models

5/93 on

DESCRIPTION

F
R
F
F

Sway bar - link lower


Sway bar - link upper
Sway bar - link inner/outer
Sway bar - link eye

OME P/NO.
1

KITS REQ
BUSHES IN KITS
DIAGRAM #

MODEL

LOC'N

SUSPENSION BUSH KIT SELECTION

NOTE

OMESB2360
OMESB2360
1
OMESB2360
OMESB0052

1
1
2
1

4
4
4
4

7
7
7
7

OMESB2361
OMESB82
OMECA77B
OMEGQPF05
OMEGQPF10
OMESB0055
OMESB0056
OMESB0054
OMESB2365
OMESB2379
OMEGQPR05
OMEGQPR10
OMESB0062
OMESB0061
OMESB0054
OMESB2379
OMESB64

1
2
1

4
6
4

1
1
1
1
1
1
1
1
1
1
1
2

8
4
4
2
8

8
8
4
8
6

2
4
8
8
8
8
8
8
8
8
9
9
9
9
9
9
4

Suits OME springs only

F Spring bush
R Spring bush

OMESB19
OMESB19

2
2

6
6

4
4

Suits OE & OME springs

R Spring & shackle bush kit

OMESB90

Suits OE & OME springs

R Spring bush
R Spring bush

OMESB80
OMESB80

2
2

6
6

4
4

Suits OE & OME springs


Suits OE & OME springs

ALL

F Coil Packer - 10mm

OMELNF10

92 on

F Caster kit

CALR2

County 110 Model

84 to 92

F Caster kit

CALR1

Discovery All Models

89 to 99

F Caster kit

CALR2

Range Rover

72 to 86

F Caster kit

CALR1

Range Rover

86 to 95

F Caster kit

CALR2

OMESB2361
OMESB82

1
2

4
6

7
4

OMESB83

F Sway bar - link inner

OMESB2361

F Sway bar - link inner/outer

OMESB2360 2

Feroza All Models


Rocky All Models

10/88 on
4/84 to 93

FORD
Courier All Models

1/87 on

Maverick SWB & Wagon Models

8/87 to 9/93

Maverick Single Cab Models Leaf Springs


GMH / ISUZU
Drover
Jackaroo / Trooper Models
UBS 16 & 17
Rodeo - Isuzu Pick Up Models
All Models
V6 Models Only
LADA
Niva
LAND ROVER
Defender 90, 110 & 130, 110 Long Travel,
130 Long Travel Models

2/85 on

8/85 to 91
81 to 87
88 on

F Sway bar - link


R Spring bush
F Caster Kit
Coil Packer - 5mm
Coil Packer - 10mm
Control arm - to diff front/centre (std)
Control arm - to chassis
Panhard rod
Sway bar - D mount (15mm)
Sway bar - link
R Coil Packer - 5mm
Coil Packer - 10mm
Control arm - upper
Control arm - lower
Panhard rod
Sway bar - link
Spring & shackle bush kit

MAZDA
B2500 & B2600
B2500 & B2600

3/87 to 98

F Sway bar - link


R Spring bush

MITSUBISHI
Challenger PA Wagon (Rear Leaf Springs)
Pajero

98 to 5/00

R Spring bush

NG
NA, NB, NC, ND, NE, NF & NG

9/89 to 5/91
83 to 5/91

All Leaf Spring Models


Triton
Club Cab Model Only

5/91 on

R Spring bush

MK Models

10/96 on

F Sway bar - link inner/outer


R Spring bush
R Spring & shackle bush kit

Suits V6 & intercooled


diesel models
Suits 4 cyl petrol & diesel
2
models not intercooled
4

OMESB2360 2
OMESB38
2
OMESB38
2

4
6
6

2
4
4

OMESB8

1. When remaining stock of OME P/NO. is exhausted, no further product will be available.

PAGE 105

Suits 44mm wide control


arms
Suits 38mm wide control
arms
Suits 44mm wide control
arms
Suits 38mm wide control
arms
Suits 44mm wide control
arms

cont.

YEAR

NISSAN
Navara D21 All

9/85 to 97

Navara D22 All

2/97 on

KITS REQ
BUSHES IN KITS
DIAGRAM #

MODEL

LOC'N

SUSPENSION BUSH KIT SELECTION

DESCRIPTION

OME P/NO.
OMESB2379
OMESB81
OMESB2379
OMESB81
OMESB91
OMESB2379

1
2
1
2
2
1

8
6
8
6
6
8

1
4
1
4
4
1
4

Pathfinder All
Patrol

8/86 to 94

F Sway bar - link


R Spring & shackle bush kit
Sway bar - link upper
R Spring & shackle bush kit
R Spring & shackle bush kit
F Sway bar - link

MQ (Round Head Lights)

80 to 8/84

F Spring (front eye) bush kit

OMESB28

MQ (Square Head Lights)

8/84 to 87

F Spring (front eye) bush kit

OMESB31

80 to 87

F Spring (rear eye) bush kit


R Spring & shackle bush kit
Spring bush

OMESB29
OMESB2
OMESB29

2
2
2

1
4
1

11/87 to 97

F Body mount - bumper area

OMESB9090

F Body mount - cab front

OMESB9091

F Body mount - cab centre

OMESB9092

F Body mount - cab front & centre

OMESB9092

Caster kit - Control arm


Control arm - to axle
Control arm - to chassis
Spring - eye front/rear & shackle
Panhard rod - bush
Sway bar - link
Coil Packer - 5mm
Coil Packer - 10mm
Body mount - cab rear to axle
Body mount - cab rear to axle
Panhard rod - bush
Spring - eye front/rear & shackle

OMECA77B
OMESB0055
OMESB0056
OMESB1
OMESB0054
OMESB2379
OMEGQPF05
OMEGQPF10
OMESB9092
OMESB9092
OMESB0054
OMESB64

1
1
1
2
1
1

4
8
4
6
4
8

2
1
1
2

4
4
4
6

R Sway bar - link

OMESB2379

R Control arm - lower


R Control arm - upper
R Coil Packer - 5mm
Coil Packer - 10mm

OMESB0061 1
OMESB0062 1
OMEGQPR05
OMEGQPR10

8
8

F Body mount - bumper area

OMESB9090

F Body mount - cab front

OMESB9091

Body mount - cab centre

OMESB9092

Body mount - cab front & centre


Caster kit - Control arm - to axle
Control arm - to axle
Control arm - to chassis

OMESB9092
OMECA77B
OMESB0055
OMESB0056

2
1
1
1

4
4
8
4

8
8
8

F Panhard rod - bush

OMESB0054

F Sway bar - link

OMESB2379

F Sway bar - mount 15mm

OMESB2365

R Body mount - cab centre to axle


Body mount - cab centre to axle
R Panhard rod - bush
R Trailing arm - lower

OMESB9092
OMESB9092
OMESB0054
OMESB0061

2
1
1
1

4
4
4
8

MQ All Models

PATROL - Y60, GQ

F
F
F
F
F
F
F
R
R
R
R

PATROL - Y61, GU

10/97 on

F
F
F
F
10/97 on

NOTE

Suits models to 8/02


Suits models 10/02 on

Use with OMESB29/OE


springs use OMESB3
Use with OMESB29 suits
4
OME springs
4
4 Suits OE & OME springs
Suits OME springs
4
Suits wagon & hardtops,
no kit available for CC
Suits all wagon to 11/94 &
all hardtop models
Suits all wagon & hardtop
models
Suits pick up & CC
models
8
8
8
4 Suits leaf spring models
8
8 Suits coil spring models

Suits all wagon models


Suits all hardtop models
9 Not suitable before 9/89
Leaf spring models
4
Suits CC models with coil
9
suspension
9
9

Suits wagon & hardtop,


no kit available for CC
Suits all wagon & hardtop
models
Suits all wagon & hardtop
models
Suits all CC models

Suits CC all models &


wagon to 02/00
Suits coil spring models to
8
2001
Does not suit ZD30
8
wagon
Suits all wagon models
Suits all hardtop models
9
9
cont.

PAGE 106

YEAR

DESCRIPTION

OME P/NO.

KITS REQ
BUSHES IN KITS
DIAGRAM #

MODEL

LOC'N

SUSPENSION BUSH KIT SELECTION

NOTES

NISSAN (Continued)
PATROL - Y61, GU - cont.

SUZUKI
Jimny SN413
LJ50
LJ80
Sierra SJ410 & SJ413
TOYOTA
4 Runner Leaf Spring Front & Rear
4 Runner (Surf) LN60, YN60

10/97 on

R Sway bar - link

OMESB2379

R Trailing arm - upper


R Coil Packer - 5mm
Coil Packer - 10mm

OMESB0062 1
OMEGQPR05
OMEGQPR10

R Coil Packer - 10mm


74 to 6/78 F Spring Bush
74 to 6/78 R Spring Bush
7/78 to 12/81 F Spring Bush
R Spring Bush
7/81 to 95 F Spring Bush
R Spring Bush

FJ62, HJ60, 61

OMESJR10
OMESB25
OMESB25
OMESB19
OMESB19
OMESB19
OMESB19

2
2
2
2
2
2

OMESB5
OMESB6

2
2

OMESB6

8 9
8

Suits CC models with coil


suspension.

4
4
4
4
4
4

Suits OE & OME springs


Suits OE & OME springs
Suits OE & OME springs
Suits OE & OME springs
Suits OE & OME springs
Suits OE & OME springs

6
6

4
4

Suits OE & OME springs


Suits OE & OME springs

Suits OE & OME springs

OMESB0049

2 12

OMESB2915
OMESB3010

1
1

8
4

7 Suits LN130, RN130 models


7 Suits VZN130, YN130 models

OMESB5
OMESB2915
OMESB6
OMESB5
OMESB6
OMESB5
OMESB0049
OMESB6

2
1
2
2
2
2
1
2

6
8
6
6
6
6
2
6

4
4
4
4
4
4
4
4

OMESB0049

OMESB43
OMESB2915
OMESB0049
OMESB43
OMESB3010
OMESB3010
OMESB0049
OMESB43

2
1
1
2
1
1
1
2

6
8
2
6
4
4
2
6

4
1
1
4
1
1
1
4

Suits OME springs only

OMESB30
OMESB1
OMESB30

2
2
2

6
6
6

4
4
4

R Spring - bush kit-to suit 18mm ID

OMESB79

R Spring - bush kit-to suit 18mm ID

OMESB1

Suits 35mm spring eye


Suits 35mm spring eye
Suits 35mm spring eye
Suits 35mm spring eye &
30mm hanger bracket
Suits 35mm spring eye

OMESB1
OMESB2915
OMESB1
OMESB2327
OMESB1
OMESB2915
OMESB2327

2
1
2
1
2
1
1

6
8
6
2
6
8
2

4
4
4
4
4
4
4

7/84 to 10/85 F Spring - bush kit


R Spring - bush kit

4 Runner IFS Front Leaf Spring Rear


4 Runner (Surf) LN61, YN63
11/85 to 9/89 R Spring - bush kit
HiLux IFS Front & Coil Spring Rear
4 Runner (Surf) LN130, RN130, VZN130,
10/89 to 6/96 F Sway bar - mount 25mm
YN130
R Sway bar - link
R Sway bar - link
HiLux 4WD Leaf Spring Front & Rear
HiLux (Surf) LN36, 46 RN36, 46
4/79 to 10/83 F Spring - bush kit
F Sway bar - link
R Spring - bush kit
HiLux (Surf) LN65, YN 65, 67
11/83 to 9/88 F Spring - bush kit
R Spring - bush kit
HiLux (Surf) RN105, LN106
10/88 to 11/97 F Spring - bush kit
F Sway bar - mount 25mm
R Spring - spring bush
HiLux 4WD IFS Front & Leaf Spring
Rear
HiLux (Surf) LN107, 111, RN106, 110,
10/88 to 12/97 F Sway bar - mount 25mm
111
R Spring - bush kit
LN167, 172, RZN169, 174
11/97 on
F Sway bar - link
F Sway bar - mount 25mm
R Spring - bush kit
KZN165
12/99 on
F Sway bar - link
F Sway bar - link
F Sway bar - mount 25mm
R Spring - bush kit
LandCruiser 40 Series
BJ40, 42, FJ40, 45, ,JH45, 47
1969 to 12/84 F Spring - bush kit-to suit 15mm ID
F Spring - bush kit-to suit 18mm ID
R Spring - bush kit-to suit 15mm ID

LandCruiser 60 Series
FJ60, 62, HJ60, 62

11/80 to 8/87 F
F
R
R
8/87 to 12/91 F
F
F

Spring - bush kit


Sway bar - link
Spring - bush kit
Sway bar - mount 23mm
Spring - bush kit
Sway bar - link
Sway bar - mount 23mm

Suits OE & OME springs


Suits OE & OME springs
Suits OE & OME springs
Suits OE & OME springs
Suits OE & OME springs
Suits OE & OME springs

Suits OME springs only

Suits OME springs only

Suits OE & OME springs


Suits OE & OME springs
Suits models to 1/90
cont.

PAGE 107

TOYOTA (continued)
LandCruiser 60 Series - cont.
FJ62, HJ60, 61 - cont.
LandCruiser 70 Series
Bundera (Prado NZ) LJ70, RJ70

BJ70, 73, 74

HJ75

FJ70, 73, 75

FZJ70, 75, HZJ70, 73, 75

YEAR

OME P/NO.

8/87 to 12/91 R Spring - bush kit


R Sway bar - mount 23mm

OMESB1
OMESB2327

2
1

6
2

4
4

OMESB8133
OMESB2361
OMESB2327
OMESB0049
OMESB1
OMESB2361
OMESB2327
OMESB0063
OMESB1
OMESB1
OMESB2361
OMESB2327
OMESB0063
OMESB16
OMESB1
OMESB2361
OMESB2327
OMESB0063
OMESB0049
OMESB16
OMESB1
OMESB0095
OMESB1
OMESB2361
OMESB0063
OMESB0049

1
2
1
1
2
2
1
1
2
2
2
1
1
2
2
2
1
1
1
2
2
1
2
2
1
1

4
8
2
2
6
8
2
2
6
6
8
2
2
6
6
8
2
2
2
6
6
2
6
8
2
2

OMESB0095

OMESB16
OMESB1

2
2

6
6

R Sway bar - mount 25mm

OMESB0095

Spring - bush kit


Sway bar - link
Spring - bush kit
Caster kit
Control arm - to chassis

OMESB1
OMESB2361
OMESB1
OMECA77B
OMESB0050

2
1
2
1
1

6
8
6
4
4

OMESB2413

OMESB2414
OMESB0046
OMESB3010
OMESB0052
OMESB3010
OMESB0095

1
1
1
1
1
1

2
4
4
4
4
2

Spring - bush kit

OMESB86

Spring - bush kit

OMESB84

Spring - bush kit

OMESB85

Suits models to 8/87


10
10
Suits models 8/87 - 1/90
10
10
Suit OE & OME springs
4
4
Suits models to 5/86
4
Suits models 6/86 on
4
Suits OE & OME springs
4
Suits OE & OME springs
4
4
Suits models to 5/86
4
Suits models 6/86 on
4
4
Suits OE & OME springs
4
4
Suits models to 5/86
4
Suits models 6/86 on
4
4 Suits FJ75 models to 8/91
Suits FJ70, 73 models
4
4
4 Suits bracket height = 38mm
Suits OE & OME springs
4
4
4 Suits HZJ75 models to 4/91
4 Suits HZJ75 models to 4/91
Suits 4/91 on bracket height =
4
38mm
Suits FJ75 models
4
Suits HZJ70 & 73 models
4
Suits 4/91 on bracket height =
4
38mm
Suits OE & OME springs
4
4
Suits OE & OME springs
4
10 Caster align offset 3 degree
10
Contains new bolts, nuts &
10
crush tubes
10
10
8
4
4
4 Suits bracket height = 38mm
Suits FZJ / HDJ / HZJ78
4
models with OME springs
Suits FZJ / HDJ / HZJ79
4
models with OME springs
Suits all models with OME
4
springs & greasable shackles

OMECA77B
OMESB0050
OMESB0046
OMESB0045
OMESB0051

1
1
1
2
1

4
4
4
6
4

1/85 to 12/91 F
F
F
F
1/85 to 3/90 F
F
F
F
R
1/85 to 3/90 F
F
F
F
R
1/85 to 10/92 F
F
F
F
F
R
R
R
1/88 to 11/99 F
F
F
F

Panhard rod - bush


Sway bar - link
Sway bar - mount 23mm
Sway bar - mount 25mm
Spring - bush kit
Sway bar - link
Sway bar - mount 23mm
Sway bar - mount 23mm
Spring - bush kit
Spring - bush kit
Sway bar - link
Sway bar - mount 23mm
Sway bar - mount 23mm
Spring - bush kit
Spring - bush kit
Sway bar - link
Sway bar - mount 23mm
Sway bar - mount 23mm
Sway bar - mount 25mm
Spring - bush kit
Spring - bush kit
Sway bar - mount 25mm
Spring - bush kit
Sway bar - link
Sway bar - mount 23mm
Sway bar - mount 25mm

R Spring - bush kit


R Spring - bush kit

FZJ78, 79, HDJ78, 79, HZJ78, 79

3/90 to 2/91

8/99 on

F
F
R
F
F

F Sway bar - link outer


F
F
R
R
R

LandCruiser 80 Series
FJ80, FZJ80, HDJ80, HZJ80

NOTES

DESCRIPTION

F Sway bar - mount 25mm

PZJ70, 73

KITS REQ
BUSHES IN KITS
DIAGRAM #

MODEL

LOC'N

SUSPENSION BUSH KIT SELECTION

Sway bar - mount 31mm


Panhard rod - bush
Sway bar - link inner
Sway bar - link outer lower
Sway bar - link outer upper
Sway bar - mount 25mm

F Caster kit
F Control arm - to chassis only
F Panhard rod - bush
F Control arm - complete kit
F Sway bar - link upper
1. When remaining stock of OME P/NO. is exhausted, no further product will be available.
1/90 to 2/98

PAGE 108

Suits OE & OME springs

10 Caster align offset 3 degree


10
10
10
10
cont.

TOYOTA (continued)
LandCruiser 80 Series - cont.
FJ80, FZJ80, HDJ80, HZJ80 - cont.

LandCruiser 100 Series


FZJ105, HZJ105 Solid Axle

YEAR

1/90 to 2/98

3/98 on

LandCruiser Lexus
HDJ100, UZJ100 (Lexus) IFS

3/98 on

Tacoma

To 2004

LOC'N

MODEL

KITS REQ
BUSHES IN KITS
DIAGRAM #

SUSPENSION BUSH KIT SELECTION

DESCRIPTION

OME P/NO.

F
F
F
F
F
F
F
R
R
R
R

Sway bar - link lower


Sway bar - mount 24mm
Sway bar - mount 26mm
Sway bar - mount 26mm
Sway bar - mount 29mm
Coil Packer - 5mm
Coil Packer - 10mm
Panhard rod - bush
Sway bar - link lower
Sway bar - link upper
Sway bar - mount 25mm

OMESB0044
OMESB0063
OMESB0094
OMESB0091
OMESB0092
OME80PF05
OME80PF10
OMESB0053
OMESB0052
OMESB3010
OMESB0049

1
1
1
1
1

4
2
2
2
2

1
1
1
1

4
4
4
2

10
10
10
10
10
10
10
8
8
8
8

R Sway bar - mount 25mm

OMESB0095

R Control arm - lower


R Control arm - upper

OMESB0047
OMESB0048

1
1

8
8

8
8

OMECA77B
OMESB0045
OMESB0050
OMESB0046
OMESB0044
OME80PF05
OME80PF10

1
2
1
1
1

4
6
4
4
2

10 Caster align offset 3 degree


STD replacement
10
10
10
10

F Sway bar - mount 29mm

OMESB0092

2 10

R
R
R
R
R
R
R
R

Sway bar - link upper


Sway bar - link lower
Panhard rod - bush
Sway bar - mount 25mm
Control arm - lower
Control arm - upper
Coil Packer - 5mm
Coil Packer - 10mm

OMESB3010
OMESB0052
OMESB0053
OMESB0095
OMESB0047
OMESB0048
OME80PR05
OME80PR10

1
1
1
1
1
1

4
4
4
2
8
8

8
8
9
8
8
8

F
R
R
R

Sway bar - link upper


Sway bar - link
Spring bush
Spring bush

OMESB2361
OMESB2915
OMESB88
OMESB89

1
1
2
2

4
8
4
4

7
7
4
4

F
F
F
F
F
F
F

Caster kit
Control arm - complete kit
Control arm - to chassis only
Panhard rod - bush
Sway bar - link lower
Coil Packer - 5mm
Coil Packer - 10mm

PAGE 109

NOTES

Suits bracket height = 35mm


Suits bracket height = 35mm
Suits bracket height = 38mm
Suits bracket height = 38mm

Suits bracket height = 35mm


Suits large bracket height =
38mm

Suits large bracket height =


38mm

Suits bracket height = 38mm

Suits OME springs only


Suits original shackles only

DIAGRAM REFERENCE FOR SUSPENSION BUSH KITS

Diagram 1.

Diagram 2.

Diagram 3.

Diagram 4.

Diagram 5.

Diagram 6.

PAGE 110

DIAGRAM REFERENCE FOR SUSPENSION BUSH KITS

Diagram 7.

Diagram 8.

Diagram 9.

Diagram 10.

Diagram 11.

Diagram 12.

PAGE 111

APPLICATIONS - SPECIFICATIONS - BUSH KITS


NUMERICAL SPRING & SHOCK / STRUT BUSH
Kit No.
OMESB1

Component Description
spring bush PT260

OMESB2

OMEB27

spring bush PT280


spring bush PT281
spring bush PT282
spring bush PT230
spring bush PT229
spring bush PT240
spring bush PT231
spring bush PT231
OBSOLETE
spring bush PT290
spring bush PT291
spring bush PT292
shock bush SP1178 / 19
shock bush SP056 (cotton reel type)
shock bush OME066 / 16
OBSOLETE
shock bush SP091
shock bush OME1178 / 16
shock bush OME066 / 19
spring bush PT270
shock bush OME066 / 22
sleeve B17S 22 x 16 x 33
OBSOLETE
spring bush PT301
spring bush PT302
sleeve B19S 16 x 13 x 65
spring bush PT229
spring bush PT301
spring bush PT302
spring bush PT303
sleeve 16 x 13 x 65
sleeve 16 x 13.2 x 33

2
2
2
4
2
2
4
6
6
2
2
2
4
2
4
4
4
4
4
6
2
2
2
2
4
1
6
2
2
2
1
2

OMESB28

spring bush PT284

OMESB29

spring bush PT285 & sleeve

OMESB30

spring bush PT261


spring bush PT229
spring bush PT283

4
2
2

OMESB3
1
OMESB4
OMESB5
OMESB6
OMESB7
OMESB8

OMEB9
OMEB10
OMEB11
1
OMEB12
OMEB13
OMEB14
OMEB15
OMESB16
OMEB17
1

OMEB18
OMESB19

OMESB20
OMESB25

OMESB31
OMEB36
OMESB38

Qty
6

To Fit
Toyota 35mm spring eye, 18mm pin OE & OME
Series F/H/B, J/ZJ: 75, 74, 73, 70, 60, 47, 45, 42, 40
Nissan GQ Patrol leaf spring models OME only
Nissan MQ Patrol all models - rear OE spring
Nissan MQ Patrol round headlight models-front OE spring eye
OBSOLETE
Toyota HiLux all models (except IFS front)
Toyota HiLux all models (except SR5 & extra cab rear)
Toyota FJ55 all models front & rear, 45 Series Rear only OE
Mitsubishi Pajero leaf spring models & L200 models

Small eye bush with 19mm bore


Small eye shock mount
Converts large eye 19mm bore to a 16mm bore
Pin 12 x 60 replacement bush
Pin 10 x 60 replacement bush
Small eye with 16mm bore
Large eye with 19mm bore
40mm spring eye for Toyota 75 series rear springs
Large eye tapered bush with sleeve
Converts small eye bush to suit 19mm bore with sleeves
Suzuki Sierra all models except LJ50 front & rear springs

Toyota LandCruiser 40 series 25mm OE spring front & rear.


Suzuki LJ50 front & rear

N41 & N81 being converted for fitment to CJ Jeep and


Cherokee wagon 83 on front bottom mount. Mahindra
front & rear bottom mount.
Nissan MQ Patrol early model (round headlights)
- front spring, front eye (to be fitted with OMESB29)
Nissan MQ Patrol all models
- front spring, rear eye (to be fitted with OMESB28)
Toyota LandCruiser 45/47 Series front spring with 35mm
spring eye and hanger bracket with 15mm pin hole
Nissan MQ Patrol late model (square headlights)
- front spring, front eye (to be fitted with OMESB29)
large eye 19mm bore
All Triton to 1997 and L200 - rear - suits OME
springs only

shock bush OME066 / 19


2
spring bush PT292
2
spring bush PT291
2
spring bush PT305
2
sleeve 19 x 14.2 x 81
1
OMEB40
shock bush OME 066-19MGQ
N101, N22F & N29 Patrol GQ lower mount - rear shock
2
OMEB42
shock bush 305IY
pin 14 x 70 replacement
8
OMESB43
spring bush PT304
Toyota HiLux IFS extra cab & SR5 dual cab models
2
spring bush PT309
being fitted with OME18 series spring
2
spring bush PT231
2
sleeve 19 x 14.1 x 68
1
OMESB57
spring bush PT306
Jeep Wrangler - front & rear to suit OE shackles
4
spring bush PT307
2
sleeve 19 x 15 x 73
1
OMESB64
spring bush PT270
Nissan Patrol GQ leaf spring cab chassis OME spring - rear
4
spring bush PT260
2
cont.
1. When remaining stock of OME P/No. is exhausted no further product will be available.

PAGE 112

APPLICATIONS - SPECIFICATIONS - BUSH KITS


NUMERICAL SPRING & SHOCK / STRUT BUSH
Kit No.

Component Description

To Fit
Qty
Land Rover Series III 88" & 109"
2
spring & shackle bushes OE replacement - front
4
1
OBSOLETE
OMESB75
1
2
Land Rover series III 88" & 109" spring &
6
1
OBSOLETE
OMESB76
shackle bushes OE replacement - rear
3
1
OBSOLETE
Land Rover Series III 88" & 109" lower shock bush - rear
OMEB77
4
1
OBSOLETE
Pin 10 x 60mm steering stabiliser mount
OMEB78
4
OMESB79
spring bush PT308
LandCruiser F/HJ45, 47 LWB models - OME spring
4
spring bush PT231A
2
OMESB80
spring bush PT304
Holden / Isuzu Rodeo 1 tonne
2
spring bush PT231
rear spring to suit OE & OME springs
4
sleeve 19 x 14 x 68
1
OMESB81
spring bush PT310
Nissan Navara 1 tonne
4
spring bush PT311
rear spring to suit OE & OME springs
2
sleeve 22 x 18 x 70
1
OMESB82
spring bush PT281
Mazda / Ford 1 Tonne 4x4
2
spring bush PT314
1987 on rear spring OME only
2
spring bush PT315
2
sleeve 22 x 17 x 68
1
OMESB83
spring bush PT291
Mitsubishi Challenger / Montero
2
spring bush PT292
rear spring to suit OME19 only
2
spring bush PT316
2
sleeve 22 x 16 x 80
1
OMESB84
spring bush PT317
Toyota LandCruiser 79 Series cab chassis & utility model only
2
spring bush PT318
suit OME springs only
4
sleeve 20 x 14 x 86
2
OMESB85
spring bush PT270
Toyota LandCruiser 78 & 79 Series
4
spring bush PT317
must be used with OME springs & greasable shackle kit only
2
OMESB86
spring bush PT327
Toyota LandCruiser 76 & 78 Series
2
spring bush PT318
Rear suit OME springs with OE shackles.
2
spring bush PT319
2
sleeve 20 x 14 x 86
1
OMESB87
spring bush PT307
Jeep YJ Wrangler front and rear
2
spring bush PT320
Use only with greasable shackle OMEGS11
2
spring bush PT321
2
sleeve 19 x 15 x 73
1
OMESB88
spring bush PT322
Toyota Tacoma rear shackle bushes only
2
spring bush PT323
Use with OME springs & OMEGS12 greasable shackles.
2
OMESB89
spring bush PT322
Toyota Tacoma rear shackle bushes
2
spring bush PT323
for OEM shackles
2
sleeve 18 x 14 x 69
1
OMESB90
spring bush PT231
Holden/Isuzu Jackaroo Trooper 1982-92
4
spring bush PT282
rear OME spring
2
OMESB91
spring bush PT310
Nissan Navara D22 model - rear spring
2
spring bush PT311
to suit OE & OME springs
2
spring bush PT326
2
sleeve 22 x 18 x 70
1
OMESB93
spring bush PT260
Toyota LandCruiser HZJ71 & HZJ74
4
spring bush PT317
2
OMESB95
spring bush PT326
Nissan D40 Navara suits OE shackle
2
spring bush PT331
kit only
2
1
spring bush PT324
Nissan D40 Navara suits OME greasable
OMESB96
2
spring bush PT325
shackle kit only
2
OMESB97
spring bush PT281
Mazda BT50 / Ford Ranger 2006 on
2
spring bush PT314
2
spring bush PT333
2
sleeve 19 x 14 x 72
1
OMESB98
spring bush PT328
Toyota HiLux 2005 on to suit OE & OME springs.
2
spring bush PT329
Colorado 12 on / Izusu DMAX 12 on suits OME
2
spring bush PT333
Greasable Shackle, OMEGS14.
2
cont.
1. When remaining stock of OME P/No. is exhausted no further product will be available.

PAGE 113

APPLICATIONS - SPECIFICATIONS - BUSH KITS


NUMERICAL SPRING & SHOCK / STRUT BUSH
Kit No.
OMESB98
(cont.)
OMESB99

OMESB100

OMESB101
OMESB102

OMESB103

OMESB104
OMESB105

OMESB106

OMESB107

OMESB108
OMESB109

OME3101

OME3121

OME3133

OME3134

OME3135

OME3139

Component Description
sleeve 19 x 14 x 72

Qty
1

spring bush PT282


spring bush PT326
spring bush PT331
sleeve 18 x 14 x 69
spring bush PT282
spring bush PT324
spring bush PT325
sleeve 18 x 14 x 69
spring bush PT319
spring bush PT327
spring bush PT310
spring bush PT333
spring bush PT336
sleeve 19 x 14 x 72
spring bush PT335
spring bush PT333
spring bush PT281
sleeve 19 x 14 x 72
bush leaf spring VW-007
bush leaf spring VW-008
spring bush PT324
spring bush PT311
sleeve 22 x 18 x 70
spring bush PT317
spring bush PT282
spring bush PT333
sleeve 19 x 14 x 72
spring bush PT333
spring bush PT337
spring bush PT338
sleeve 19 x 14 x 72
spring bush PT333
sleeve 19 x 14 x 72
spring bush PT341
sleeve 26 x 20 x 89
sleeve 26 x 20 x 89
upper bush 3101A
lower bush 3010B
crush tube F0043
upper bush 67257
lower bush 67258
washer 5w327
upper bush 68351
lower bush 68352
washer 5w327
upper bush 68201
lower bush 68202
washer 5w327
upper bush 68168
lower bush 68169
washer 5w327
crush tube F1281
upper bush 67496
lower bush 67496
washer 5w327
crush tube F0055

2
2
2
1
2
2
2
1
4
2
2
2
2
1
2
2
2
1
1
1
4
2
1
2
2
2
1
2
2
2
1
4
2
4
1
1
1
1
1
1
1
2
1
1
2
1
1
2
1
1
2
1
1
1
2
1

To Fit
Toyota HiLux 2005 on to suit OE & OME springs.
Colorado 12 on/DMAX 12 on suits OMEGS14
Nissan Navara D40
suits original shackle kit only.

Nissan Navara D40


suits OME greasable shackle
kit: OMEGS15
Toyota LandCruiser 79 Series suits original shackle & pin from
07/2009 on
Ford Ranger PX 2011 on / Mazda BT-50 2011 on suits OE
shackle

Ford Ranger PX 2011 on / Mazda BT-50 2011 on suits OME


greasable shackle kit OMEGS20

Volkswagen Amarok
Nissan Navara D22 suits OME greasable shackle

Toyota Tundra suits OME greasable shackle

Holden Colorado / Isuzu DMAX suits OE shackle

Toyota Tacoma suits OE shackle


Ford F250, F350 2011 On / F250, F350 2008 On

Mitsubishi Pajero 2000 on

Mitsubishi Triton ML, MN, Challenger 2010 on

Toyota HiLux 05 on, Prado 150, Prado 120, FJ Cruiser,


Fortuner, 4 Runner, Tacoma
Holden Colorado 2012 on / Isuzu DMAX 2012 on

Ford Ranger PX 2011 on / Mazda BT-50 2011 on

Nissan Navara D40 2005 on, Pathfinder R51 2005 on, Xterra
2005 on
Suzuki Equator

PAGE 114

SPECIFICATIONS - BUSH KITS


OLD MAN EMU POLYURETHANE
SPRING BUSH DIMENSIONS

Dimensions
Part No.
PT229
PT230
PT231
PT240
PT260
PT261
PT270
PT280
PT281
PT282
PT283
PT285
PT290
PT291
PT292
PT301
PT302
PT304
PT305
PT306
PT307
PT309
PT310
PT311
PT314
PT315
PT316
PT317
PT318
PT319
PT320
PT321
PT322
PT323
PT324
PT325
PT326
PT327
PT328
PT329
PT330
PT331
PT333
PT335
PT336
PT337
PT338
PT341

D1
32.0
32.0
36.0
36.0
45.0
45.0
50.0
44.0
44.0
52.0
44.0
32.7
45.0
40.0
40.0
50.0
40.0
52.0
43.0
44.0
50.0
40.0
42.0
52.0
44.0
40.0
43.0
52.0
52.0
52.0
44.0
44.0
40.0
40.0
42.0
42.0
42.0
52.0
39.0
39.0
54.0
42.0
52.0
45.0
42.0
38.0
38.0
50.0

D2
24.9
24.9
30.0
30.0
35.0
35.0
40.0
32.7
32.7
40.0
32.7
None
31.5
28.0
27.5
40.0
30.0
40.0
31.5
31.4
37.6
30.0
32.6
40.0
32.0
32.7
31.5
39.8
39.8
40.0
31.8
31.8
32.0
30.0
33.0
33.0
33.0
39.8
30.0
30.0
39.5
33.0
39.9
32.0
32.0
30.0
30.0
42.0

d
15.0
15.0
18.0
18.0
18.0
15.0
18.0
18.0
18.0
18.0
18.0
22.0
18.0
16.0
16.0
16.0
13.0
19.0
19.0
18.1
18.1
18.0
20.1
22.2
18.0
22.2
22.2
18.0
20.0
18.0
18.0
18.0
18.0
18.0
19.0
19.0
20.1
18.0
19.0
19.0
19.0
20.1
19.0
18.0
20.0
18.0
18.0
26.0

PAGE 115

T
4.5
3.0
3.6
4.0
5.5
4.0
5.4
5.2
4.5
4.4
5.8
None
4.4
5.0
4.2
6.9
4.4
4.0
5.5
6.0
6.0
4.0
4.0
4.5
4.5
4.0
5.0
6.0
8.0
9.5
6.5
4.3
4.0
4.5
4.0
4.0
4.0
8.0
4.0
4.0
6.0
4.0
6.0
4.5
4.0
5.0
5.0
6.0

L
35.0
35.0
30.0
48.0
35.0
35.0
35.0
43.0
30.0
30.0
28.5
60.0
35.0
44.0
34.0
25.0
25.0
30.0
35.0
30.0
30.0
40.5
30.0
30.0
40.0
30.0
35.0
43.5
35.5
35.5
31.5
32.7
45.5
35.5
30.0
44.5
30.0
42.5
30.0
44.5
30.0
44.5
30.0
49.0
49.0
30.0
45.0
38.0

Number of Splines
9
9
9
9
11
9
13
11
11
13
13
0
11
9
9
13
9
9
0
9
0
0
0
9
0
9
0
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9

SPECIFICATIONS - FITTING KITS


SUSPENSION FITTING KITS
Part No.
FK01
FK03
FK0411
FK0418
FK0422
FK047
FK06
FK08

Contains
16 x Flat Washer
2 x Saddle Correction Plate
4 x Retainer Spacer 11mm
4 x Retainer Spacer 18mm
4 x Retainer Spacer 22mm
4 x Retainer Spacer 7mm
2 x Stabiliser Bar Packer 3mm
2 x Anti-Inversion Plate

FK09
FK10

2 x Anti-Inversion Plate
2 x Short Gussett Plate
2 x Long Gussett Plate
2 x Anti-Inversion Side Plate
2 x Anti-Inversion Plate
2 x Ani-Inversion Side Plate
2 x 20mm Bump Stop Spacer
2 x Bracket
3 x Bolt
3 x Washer
3 x Nut
4 x Spacer Plate
4 x 35mm Bolt
4 x Spring Washer
6 x Spacer Plate
8 x Bolt M8 x 1.25 x 35mm
8 x Flat Washer
1 x Bracket
2 x Bolt M8
2 x Flat Washer
2 x Hex Nut
2 x Shock Tower Support
2 x Captive Nut
4 x Bolt M10 x 1.5 x 30mm
4 x Flat Washer
4 x Spring Washer
1 x Strut Adaptor

FK13
FK14
FK15
FK16
FK18

FK19

FK20

FK21

FK22

FK23
FK24

FK25

FK26
FK27

2 x Bracket
6 x Bolt
11 x Flat Washer
6 x Nut Nyloc
2 x Spacer Block
4 x Bolt
4 x Flat Washer
4 x Spring Washer
2 x Side Plate
2 x Support Bracket

Vehicle
Toyota 60 Series
Toyota HiLux Petrol
Toyota 60 Series
Toyota 60 Series
Toyota 60 Series
Toyota 60 Series
Suzuki
Toyota LC 60, 75 Series
All 40 & 70 Series,
Nissan GQ Patrol,
Ford Maverick ute & c/c
Toyota HiLux all models
Toyota HiLux all models

Position
Front
Front
Rear
Rear
Rear
Rear
Front
Front & Rear

Refer to:
Manual Sec. 4 GFI - Front suspension installation
Manual Sec. 4 GFI - Front suspension installation
Manual Sec. 4 GFI
Manual Sec. 4 GFI
Manual Sec. 4 GFI - Rear suspension installation
Manual Sec. 4 GFI - Rear suspension installation
Manual Sec. 4 GFI - Front suspension installation
Manual Sec. 8 Technical - Shackle Modification

Rear
Front

Manual Sec. 8 Technical - Shackle Modification


Manual Sec. 8 Technical - HiLux Front Springs

Toyota HiLux all models


Isuzu 1 Tonne P/Up
Toyota HiLux 1997 on
Jeep Wrangler TJ
Nissan GU Patrol

Rear
Rear
Rear
Rear
Rear
Sway Bar

Manual Sec. 4 GFI


Fitting instructions supplied with kit
Fitting instructions supplied with kit
Fitting instructions supplied with kit
Fitting instructions supplied with kit

Toyota LandCruiser
78 & 79 Models

Front
Sway Bar

Fitting instructions supplied with kit

Land Rover Discovery


1999 on Models

Front
Cross
Member
Rear
Exhaust
Bracket

Fitting instructions supplied with kit

Mazda / Ford
1 tonne pickup

Front

Fitting instructions

Toyota RAV 4
1998 to 2000
Nissan Y61 Patrol
with stabiliser
bar release

Front

Fitting instructions

Rear
Sway Bar

Fitting instructions

Nissan Y61 Patrol


Oil Pan Kit

Front

Fitting instructions

Isuzu / Rodeo 2003 on


Toyota LandCruiser
100 Series
IFS
Suzuki XL7

Rear
Torsion Bar
Locating
Bracket
Front

Fitting instructions supplied with kit


Fitting instructions supplied with kit

Rear
Drive Shaft

Fitting Instructions

Rear
Rear

Fitting Instructions
Fitting instructions

Toyota Tacoma
V6 & 4 cylinder
1998 to 2004

2 x Spacer
2 x Stud
2 x Spacer
Toyota Tacoma V6
FK29
2 x Bolt M10 x 1.25 x 35mm
2005 on
2 x Flat Washer M10 x 25mm
2 x Spring Washer M10 x 1/8
2 x Anti-Inversion Bracket
Mitsubishi
FK30
1 x Bracket
Ford F250, F350
FK31
1. When remaining stock of OME P/No. is exhausted no further product will be available.
FK28

PAGE 116

Fitting instructions supplied with kit

cont.

SPECIFICATIONS - FITTING KITS


SUSPENSION FITTING KITS
Part No.
FK31
(cont.)

FK32

FK33
FK34
FK35

FK36

FK37

FK38
FK39

FK40

FK41

FK42

FK43

Contains
6 x Bolt
4 x Nut x M10
2 x Nut x M10 Caged 3.3
6 x Spring Washer
10 x Flat Washer
1 x 3199908 Bracket
1 x 3199909 Kit
2 x Bolt M8 x 1.25 x 20
2 x Hex Nyloc Nut
4 x Flat Washer
Spring Bush Installation Tool
2 x Bracket
1 x Spacer
2 x Bolt
2 x Nut
2 x Washer
4 x Bracket
8 x Bolt M8 x 1.25 x 20
8 x Nut M8 x 1.25
16 x Washer
1 x Bracket
2 x Bump Stop Spacer
1 x Extension Plate
4 x Packer
2 x Bolt M14 x 1.5
2 x Nut M14 x 1.5
8 x Washer
2 x Bolt M12 x 1.25
2 x Nut M12 x 1.25
4 x Bolt M8 x 1.25 x 20
4 x Flanged Nuts M8 x 1.25
2 x Anti-Inversion Plate
1 x Bracket
2 x Bump Stop Spacer
1 x Extension Plate
4 x Packer
2 x Bolt M14 x 1.5
2 x Nut M14 x 1.5
8 x Washer
2 x Bolt M12 x 1.25
2 x Nut M12 x 1.25
4 x Bolt M8 x 1.25 x 20
4 x Flanged Nut M8 x 1.25
4 x Bump Stop Spacer
2 x Bolt M10 x 1.5 x 75
4 x Bolt M8 x 1.25 x 70
4 x Washer
2 x Flanged Nut
4 x Nut Nyloc
2 x Bracket
Assembly Bump
Stop Spacer
2 x Sway Bar Packer
4 x Bolt M10 x 1.25 x 35
4 x Flat Washer
4 x Spring Washer
4 x Backing Plate
4 x Backing Plate Wear Clip

Vehicle
1999 to 2004 Dual Cab
Ford F250, F350
1999 to 2004 Dual Cab
Models

Position
Rear

Refer to:
Fitting instructions

Toyota Tundra 2007 on

Front

Fitting instructions

Volkswagen VK Amarok
Toyota LandCruiser
78 Series
Ford F250, F350
1999 to 2004
Xtra Cab

Front
Rear Sway
Bar Mounts
Rear

Fitting Instructions
Fitting Instructions

Ford F350
2005 on

Front

Fitting instructions supplied with kit

Jeep Wrangler JK LHD

Rear

Fitting instructions supplied with kit

Toyota LandCruiser
76 Series
Jeep Wrangler JK RHD

Rear

Fitting instructions supplied with kit

Rear

Fitting instructions supplied with kit

Jeep Wrangler JK

Front & Rear Fitting instructions supplied with kit

Fitting Instructions

Nissan GU Patrol - Leaf Rear


Sprung

Fitting instructions supplied with kit

Nissan Xterra 2005 on

Rear

Fitting instructions supplied with kit

Nissan Y61 Patrol - Leaf Rear


Sprung

Fitting instructions supplied with kit


cont.

PAGE 117

SPECIFICATIONS - FITTING KITS


SUSPENSION FITTING KITS
Part No.
FK43
(cont.)

FK44

FK45

FK46

FK47

FK47RHD

FK48

FK49

Contains
4 x Bolt M8 x 1.25
4 x Nyloc Hex Lock Nut
4 x Tube Spacer
2 x Saddle Bracket
2 x HD Bar Bracket (1 x RH, 1 x LH)
10 x Flat Washer M8 x 17
10 x Bolt M8 x 1.25 x 25
10 x M8 Spring Washer
2 x Axle Mount Bracket (1 x RH, 1 x LH)
1 x OMEU74 U Bolt
1 x OMEU75 U Bolt
2 x Saddle Bracket
1 x Brake Line Bracket
2 x Dropper Bracket (1 x RH, 1 x LH)
3 x Spacer Wing Mount
1 x Grub Screw M10 x 1.25 x 10
1 x M10 Flat Washer
1 x Nut Flange M10 x 1.25
9 x Flat Washer M8 x 17
9 x BZ Bolt M8 x 1.25 x25
9 x Spring Washer M8 x 3/32 x 3/32
2 x Front Brake Line Bracket (1 x RH, 1 x LH)
2 x Rear Brake Line Bracket (1 x RH, 1 x LH)
1 x Hand Brake Bracket
6 x Bolt M6 x 1.0 x 20 8.8BZ
10 x Washer M6 x 20 16G
5 x Nyloc Nut M6 x 1
2 x Spring Washer M6 x 2.5 x 1.6
2 x Caged Nut M6 1.7 - 2.5
1 x Track Bar Bracket
1 x Track Bracket Spacer
2 x U Bolt
1 x Bolt M14 x 1.5PX80
2 x Spacing Washer M14 x 23.5 x 5mm
1 x Nyloc Nut M14 x 1.5
1 x Track Bar Bracket
1 x Track Bar Bracket Spacer
2 x U Bolt
1 x Bolt M14 x 1.5PX80
2 x Spacing Washer M14 x 23.5 x 5mm
1 x Nyloc Nut M14 x 1.5
2 x Front Sway Bar Link
2 x Rear Sway Bar Link
2 x Dis-connect Pin
2 x Park Pin
2 x Sway Bar Bracket (1 x RH, 1 x LH)
2 x R-clip 3.0 TZP
2 x Bolt 7/16 x 3 1/2 GR5
4 x Flat Washer 7/16
2 x Spring Washer 6/16 x 5/32 x 3/32
2 x Nut 7/16
2 x Nyloc Nut M12
2 x Nyloc Nut M10 x 1.25
2 x Flat Washer 1/2 x 1 1/8 x 3mm
2 x Flat Washer M10 x 20.6 x 2mm
Fitting Grease
8 x Driveline Packer
3 x Crossmember Spacer
2 x Flange Bolt M14 x 1.5 x 110 GR10.9
2 x Flange Bolt M14 x 1.5 x 10 GR10.9

Vehicle
Position
Nissan Y61 Patrol - Leaf Rear
Sprung

Refer to:
Fitting instructions supplied with kit

Toyota LandCruiser
76/78/79 Series

Rear

Fitting instructions supplied with kit

Toyota LandCruiser
76/78/79 Series

Rear

Fitting instructions supplied with kit

Jeep Wrangler JK

Front
Rear

Jeep Wrangler JK LHD

Rear

Jeep Wrangler JK RHD

Rear

Jeep Wrangler JK

Front
Rear

Jeep Wrangler JK

Front
Rear

cont.

PAGE 118

SPECIFICATIONS - FITTING KITS


SUSPENSION FITTING KITS
Part No.
FK49
(cont.)

FK50

FK51

FK53

FK57

FK58

FK59

FK61

FK62

FK63

FK64
FK65

Contains
4 x Flange Nut Conelock M14 x 1.5 Class 10
3 x Bolt M12 x 1.5 x 50mm 8.8
3 x Flat Washer 1/2 x 1 1/8 x 3mm
3 x Spring Washer 1/2 x 3/16 x 1/8
2 x Cable Tie 4.8 x 200mm
1 x Stabiliser Plate
1 x Stabiliser Spacer
1 x Bolt M10 x 1.25 x 25 8.8
1 x Flat Washer M10 x 20.6 x 2mm
1 x Flange Nut M10 x 1.25 FP
2 x Brake Prop Bracket
2 x Flange Nut M8 x 1.25 BZ
2 x Flat Washer M8 x 17 x 1.2
2 x Bolt M8 x 1.25PX20
4 x Driveline Packer
2 x Flange Bolt M14 x 1.5 x 110 GR10.9
2 x Flange Nut Conelock M14 x 1.5 Class 10
12 x Flat Washer M14 x 25 x 4
2 x Spring Washer M14 x 4mm x 3mm
2 x Female Bolt M10 x 25 x 1.5 8.8
2 x Brake Prop Bracket
2 x Flange Nut M8 x 1.25 BZ
2 x Flat Washer M8 x 17 x 1.2
2 x Bolt M8 x 1.25PX20 4.6
2 x spring Washer M8 x 3/32 x 3/32
1 x Brake Prop Bracket
1 x Bolt M8 x 1.25PX20 8.8
1 x Hex Lock M8 x 1.25
2 x Flat Washer M x 17 x 1.6
1 x Spring Washer M8 x 3/32 x 3/32
1 x Rear Panhard Bracket
1 x Spacer Bracket
2 x U Bolt
1 x M14 x 1.5 x 80 Bolt
1 x M14 x 1.5 Nyloc Nut
2 x M14 x 23.5 x 5mm Spacing Washer
2 x Bump Spacer Bracket
4 x M8 x 1.25 x 20 Hex Bolt
4 x M8 x 1.25 Nut Flange
4 x M8 x 17 x 1.6 Flat Washer
2 x Front Bracket
2 x Rear Bracket
4 x M8 x 1.25 Bolt
8 x M8 x 17 Flat Washer
8 x M8 Nut Flange
4 x M8 x 1.25 x 50 Bolt
2 x Front Bracket
2 x Rear Bracket
16 x M8 x 1.25 x 25 Bolt
16 x M8 x 17 Flat Washer
16 x M8 Nut Flange
8 x M10 Screw Hex
8 x M10 Flat Washer
8 x M10 Nut Flange
1 x LH Bracket
1 x RH Bracket
1 x LH Bracket
1 x RH Bracket
2 x M8 Caged Nut
2 x Bolt M8 x 16 x 1.25

Vehicle
Jeep Wrangler JK

Position
Front
Rear

Refer to:

Jeep Wrangler JK

Front

Fitting instructions supplied with kit

Toyota LandCruiser
76/78/79 Series

Rear

Fitting instructions supplied with kit

Jeep Wrangler JK

Front

Fitting instructions supplied with kit

Ford Ranger
Mazda BT-50

Centre
Bearing

Fitting instructions supplied with kit

Toyota LandCruiser
76/78/79 Series

Rear

Fitting instructions supplied with kit

Toyota HiLux 05 on

Rear

Fitting instructions supplied with kit

Jeep Wrangler JK 2"


RHD

Rear

Fitting instructions supplied with kit

Land Rover Defender

Front
Rear

Fitting instructions supplied with kit

Land Rover Defender

Front
Rear

Fitting instructions supplied with kit

Land Rover Defender

Rear

Fitting instructions supplied with kit

LandCruiser 70 Series

Front Brakes Fitting instructions supplied with kit

cont.

PAGE 119

SPECIFICATIONS - FITTING KITS


SUSPENSION FITTING KITS
Part No.
Contains
FK65 (cont.) 2 x Flat Washer M8 x 17
2 x Spring Washer M8
2 x Bracket Leaf Cable
FK66
2 x Hex HD Bolt M8 x 16 x 1.25
2 x Hex Lock Nut Nyloc M8 x 1.25
4 x Flat Washer M8 x 17 x 1.6 ZP
2 x Front Sway Bar Link
FK68
2 x Dis-Connect Pin
2 x Park Pin
1 x RH Sway Bar Bracket
1 x Sway Bar Bracket
2 x R-Clip 3.0 Tzp
2 x Bolt 7/16 x 3 1/2 GR5
4 xFlat Washer 7/16
2 x Spring Washer 7/16 x 5/32 x 3/32
2 x Nut 7/16
2 x Nut Nyloc M12
2 x Nut Nyloc M10 x 1.25
2 x Flat Washer 1/2 x 1 1/8 x 3mm
2 x Flat Washer M10 x 20.6 x 2mm
Fitting Grease
1 x Bracket Panhard Superduty
FK69
1 x Bracket RAD ARM GEN3 Superduty R
FK70
1 x Bracket RAD ARM GEN3 Superduty L
4 x Bolt Hex M18 2.5 x 130 GR10.9
4 x Nut Nyloc M18 2.5 GR10.9
8 x Washer Flat 3/4 Zinc
2 x Bolt M12 x 1.75 x 35MMZP
2 x M12 1.75 Nyloc
2 x M12 Spring Washer
4 x M12 Flat Washer
1 x Bracket Brakeline Superduty R
FK71
1 x Bracket Brakeline Superduty L
2 x Plate ESC Outside Superduty
2 x Plate ESC Inside Superduty
2 x Bracket ESC Top Superduty
4 x Bolt HXHD M6 x 1.0 x 25 GR8.8 BTZP480
4 x Nut Hex Nyloc M6 x 1.0 GR8.8 BTZP480
8 x Washer F M6 x 16 x 1.2 PTZP480
2 x Bolt M8 X 1.25 X 70 CUP SQU BLKZP
2 x Nut Hex Nyloc M8 x 1.25 GR8.8 BTZP480
2 x Nut M10 Caged 1231-B
2 x M10 1.5 x 20 ZP
2 x M10 Spring Washer
2 x M10 Flat Washer
2 x Bracket Sway Bar Superduty
FK72
4 x Bolt M12 x 1.75 x 35MMZP
4 x M12 x 1.75 Nyloc Nut
4 x Washer Spring 1/2
8 x M12 Flat Washer
2 x Spacer Bump Front Superduty
FK73
2 x M8 1.25 x 50 GR8.8
2 x M8 Flat Washer
2 x M8 Spring Washer
1 x Packer Trim 10mm F Superduty
FK74
1 x Bracket
FK78
1 x Strut Packer
FK79
1 x Bracket RAD ARM GEN3 Superduty R
FK80
1 x Bracket RAD ARM GEN3 Superduty L
4 x Bolt Hex M18 2.5 x 130 GR10.9

Vehicle
LandCruiser 70 Series

Position
Refer to:
Front Brakes Fitting instructions supplied with kit

DMAX

Rear

Jeep Wrangler JK

Front

Ford F250, F350


Ford F250, F350

Front
Front

Fitting instructions supplied with kit


Fitting instructions supplied with kit

Ford F250, F350

Front

Fitting instructions supplied with kit

Ford F250, F350

Front

Fitting instructions supplied with kit

Ford F250, F350

Front

Fitting instructions supplied with kit

Ford F250, F350


Nissan GU Cab Chassis
Jeep WK2
Ford F250, F350

Front
Rear
Front
Front

Fitting instructions supplied with kit

Fitting instructions supplied with kit


Fitting instructions supplied with kit

cont.

PAGE 120

SPECIFICATIONS - FITTING KITS


SUSPENSION FITTING KITS
Part No.
Contains
FK80 (cont.) 4 x Nut Nyloc M18 2.5 GR10.9
8 x Washer Flat 3/4 Zinc
2 x Bolt M12 x 1.75 x 35MMZP
2 x M12 1.75 Nyloc
2 x M12 Spring Washer
4 x M12 Flat Washer
1 x 45mm Panhard Rod Extended
FKWTJ01
Mounting Bracket
FKWTJ02
2 x Spacer Washer
3 x Bolt M12 x 1.25 x 30mm
6 x Flat Washer
3 x Spring Washer
3 x Nut M12 x 1.25
4 x Spacer Plate
GQGK01
8 x Hex. Bolt
8 x Flat Washer
8 x Spring Washer
4 x Spacer Plate
GQGK02
9 x Spacer 12mm
8 x Bolt M12 x 1.25 x 70mm
17 x Spring Washer
17 x Flat Washer
6 x Bolt M8 x 1.25 x 40mm
3 x Bolts M8 x 1.25 x 35mm
6 x Spacer Plate
JWGK01
6 x Bolt Spacer
6 x 2" Bolt
6 x Spacer Plate
JWGK02
6 x Bolt
17 x Flat Washer
17 x Spring Washer
8 x Spacer Plate
JWGK03
8 x Bolt
8 x Flat Washer
8 x Spring Washer
OMETH001 1 x Bearing Plate
1 x Rubber Isolator
2 x Loose Rubber Bushes
1 x Dome Washer
1 x Cupped Washer
1 x Crush Tube
3 x Mounting Nuts M10 x 1.25
Dirt Shield Included
OMETH002 1 x Bearing Plate With Bonded Lower Bush
1 x Rubber Isolateor
2 x Bonded Rubber Bushes (One On Washer
One On Bearing Plate)
1 x Loose Washer
1 x Bonded Washer (One On Rubber Bush)
3 x Mounting Nuts M10 x 1.25
OMETH003 1 x Bearing Plate With Bonded Lower Bush
1 x Rubber Isolator
2 x Bonded Rubber Bushes (One On Washer
One On Bearing Plate)
1 x Loose Washer
1 x Bonded Washer (One On Rubber Bush)
4 x Mounting Nuts M10 x 1.25
OMETH004 1 x Bearing Plate With Bonded Lower Bush
1 x Rubber Isolator
2 x Bonded Rubber Bushes (One On Washer

Vehicle
Ford F250, F350

Position
Front

Refer to:
Fitting instructions supplied with kit

Jeep Wrangler TJ
Jeep Wrangler TJ

Rear
Rear

Fitting instructions supplied with kit

Nissan GQ Patrol
Ford Maverick

Manual Sec. 4 GFI Patrol Gearbox Spacer Kit


Gearbox
Cross Member

Nissan Y61 Patrol SWB Gearbox

Fitting instructions

Jeep Wrangler to 2002

Gearbox

Fitting instructions supplied with kit

Jeep TJ 2003 Manual


Models

Gearbox

Fitting instructions

Jeep TJ 2003 Auto


Models

Gearbox

Fitting instructions

Mitsubishi Challenger
2010 On
Mitsubishi ML On
Mitsubishi MN

One side only


on ML

Toyota 4 Runner
Toyota FJ Cruiser
Toyota Fortuner
Toyota HiLux 05 On
One side only
Toyota Prado 150 Series HiLux 05 On
Toyota Prado 120 Series
Toyota LandCruiser 200 One side only
Series
200 Series
Toyota Tundra

Holden Colorado/Isuzu
DMAX 2012 On

One side only

cont.

PAGE 121

SPECIFICATIONS - FITTING KITS


SUSPENSION FITTING KITS
Part No.
OMETH004
(cont.)

OMETH005

OMETH006

OMETH007

OMETH008

XJGK01

Contains
One On Bearing Plate)
1 x Loose Washer
1 x Bonded Washer (One On Rubber Bush)
3 x Mounting Nuts M10 x 1.50
1 x Bearing Plate
1 x Rubber Isolator & Bush Combined
1 x Loose Rubber Bush
2 x Cupped Washers Sized Differently
1 x Crush Tube
3 x Mounting Nuts M10 x 1.50
1 x Bearing Plate
1 x Rubber Isolator
2 x Loose Rubber Bushes
2 x Cupped Washers
1 x Crush Tube
3 x Mounting Nuts M12 x 1.75
1 x Bearing Plate
1 x Rubber Isolator
2 x Loose Rubber Bushes
1 x Dome Washer
1 x Cupped Washer
1 x Crush Tube
3 x Mounting Nuts M10 x 1.25
1 x Bearing Plate With Bonded Lower Bush
1 x Rubber Isolator
2 x Bonded Rubber Bushes (One On Washer
One On Bearing Plate)
1 x Loose Washer
1 x Bonded Washer (One On Rubber Bush)
3 x Mounting Nuts M10 x 1.25
4 x 10mm Packer
2 x 6mm Packer
4 x m10 x 1.5 x 50 8.8 Bolt
4 x 3/8 x 3/4 Flat Washer
4 x M10 Spring Washer
1 x 25mm Spacer
1 x M8 x 1.25 x 40 8.8 Bolt
1 x M8 x 17 Flat Washer
1 x M8 Spring Washer

Vehicle
Holden Colorado/Isuzu
DMAX 2012 On

Position
Refer to:
One side only

Nissan Navara D40 2005 One side only


On
D40
Nissan Pathfinder R51
2005 On

Ford Ranger 2011 On


Mazda BT-50 2011 On

One side only


One side only

Mitsubishi Pajero NM
2000 On

One side only

Toyota Prado 90 Series One side only


To 10/2002

Jeep Cherokee XJ
Wagon 1984 On

Gearbox

PAGE 122

Fitting instructions supplied with kit

SPECIFICATIONS - LEAF SPRINGS


ADDING AN EXTRA LEAF
Part No.

Required Centre Bolt

To Suit Spring No.

D1XL
D2XL
D3XL
D4XL
D5XL
D6XL
D7XL
D8XL
D9XL
D10XL
D11XL
D12XL

UCB3
UCB2
UCB8
UCB8
UCB6
UCB6
UCB5
UCB4
UCB17
UCB5
UCB5
UCB1

CS003F & CS004F


CS004RA/B & CS005RA/B & CS017RB
CS001F & CS002F
CS001R & CS002R
CS009R & CS010R
CS019R & CS020R & CS021R
CS040R & CS041R
CS003R
CS026R & CS027R
CS042R
CS010FA/B
CS011R & CS012R

D13XL

UCB14

D14XL
D15XL
D16XL
D17XL
D18XL
D19XL
D20XL
D21XL
D22XL
D23XL
D24XL
D25XL
D26XL
D27XL
D28XL
D29XL
D30XL
D31XL
D32XL

UCB17 / UCB4
UCB11
UCB5
UCB7
UCB14
UCB16
UCB7
UCB7
UCB8
UCB09
UCB09
UCB4
UCB15
UCB10
UCB17
UCB17
UCB19
UCB10

D34XL

UCB19

D35XL
D36XL
D37XL
D38XL
EL13XL
EL14XL
EL34XL
EL39XL
EL40XL
TSXL01

UCB17
UCB21
UCB10

CS043R & 1CS044R & 1CS045R & 1CS071R


& CS043-15R

CS013R & 1CS014R & 1CS015R & 1CS066R


CS016RA/B
CS006F
CS008FA/B & CS009FA/B
CS030R & CS031R & *CS032R
CS028R & CS029R
CS012FA/B & CS013FA/B
CS038R & CS039R
CS034RA/B & CS035RA/B
CS014F
CS036R & CS037R
CS006R & CS007R & CS008R
CS062R & CS063R
CS048R
CS055R
CS047R
CS016F
CS150R & CS151R
CS053R & CS054R & CS022R

CS049R & CS056R & CS060R & 1CS068R &


CS069R
CS057R & CS058R & CS070R
CS059R
CS061R
CS064R & CS065R
EL043R & EL044R & EL045R & EL071R
EL013R & EL014R & EL015R & EL066R
EL049R & EL068R & EL069R
EL072R & EL073R & EL074R
EL077R
CS048R

* FK01 U Bolt Thread Spacer Kit required on all Cab Chassis Models.
1. When remaining stock of OME P/No. is exhausted no further product will be available.
REMOVING A LEAF:
In general terms, to reduce a springs rate remove the third leaf from the top of the spring.
Except if the third leaf is fitted with a spring clip, in this case remove the fourth leaf.

PAGE 123

SPECIFICATIONS - LEAF SPRINGS


REPLACEMENT MAIN & SECOND LEAF
PART NUMBER

OME SPRING PART NUMBER

MAIN LEAF
PART NUMBER

SECOND LEAF
PART NUMBER

SL1F/1
SL3F/1
SL6F/1
SL8FA/1
SL8FB/1
SL9FA/1
SL9FB/1
SL10FA/1
SL10FB/1
SL12FA/1
SL12FB/1
SL14F/1

SL1F/2
SL3F/2
SL6F/2
SL8FA/2
SL8FB/2
SL9FA/2
SL9FB/2
SL10FA/2
SL10FB/2
SL12FA/2
SL12FB/2
SL14F/2

SL1R/1
SL3R/1
SL4RA/1
SL4RB/1
SL6R/1
SL9R/1
SL11R/1
SL13R/1
SL16RA/1
SL16RB/1
SL17RA/1
SL17RB/1
SL18R/1
SL22R/1
SL24R/1
SL26R/1
SL28R/1
SL30R/1
SL33RA/1
SL33RB/1
SL34RA/1
SL34RB/1
SL36R/1
SL38R/1
SL43R/1
SL49R/1
SL22R/1
SL62R/1
SL62R/1
SL64R/1
SL13R/1
SL49R/1
SL150R/1

SL1R/2
SL3R/2
SL4RA/2
SL4RB/2
SL6R/2
SL9R/2
SL11R/2
SL13R/2
SL16RA/2
SL16RB/2
SL17RA/2
SL17RB/2
SL18R/2
SL22R/2
SL24R/2
SL26R/2
SL28R/2
SL30R/2
SL33RA/2
SL33RB/2
SL34RA/2
SL34RB/2
SL36R/2
SL38R/2
SL43R/2
SL49R/2
SL53R/2
SL62R/2
SL63R/2
SL64R/2
SL66R/2
SL49R/2
D31XL

FRONT SPRINGS
CS001F, CS002F
CS003F, CS004F, CS005F
CS006F, CS007F
CS008FA
CS008FB
CS009FA
CS009FB
CS010FA, CS011FA
CS010FB, CS011FB
CS012FA, CS013FA
CS012FB, CS013FB
CS014F

CS001R, CS002R
CS003R
CS004RA, CS005RA
CS004RB, CS005RB
CS006R, CS007R, CS008R
CS009R, CS010R
CS011R, CS012R

40 SERIES - OME13, OME131


1
60 SERIES - OME110, OME11, OME111
1
75 SERIES - OME67, OME671
1
HILUX - OME99A
1
HILUX - OME99B
1
HILUX - OME91A
1
HILUX - OME91B
1
PATROL M60 - OME3A, OME31A
1
PATROL M60 - OME3B, OME31B
1
SUZUKI SIERRA - OMES1A
SUZUKI SIERRA - OMES1B
1

JEEP YJ - OMEJ1F
REAR SPRINGS

CS013R, 1CS014R, 1CS015R


CS016RA
CS016RB
CS017RA
CS017RB
CS018R, CS019R, CS020R, CS021R
CS022R, CS023R
CS062R, CS063R
CS026R, CS027R
CS028R, CS029R
CS030R, CS031R, CS032R
CS033RA
CS033RB
CS034RA, CS035RA
CS034RB, CS035RB
CS036R, CS037R
CS038R, CS039R
1

CS043R, 1CS044R, 1CS045R, 1CS071R


CS049R, CS056R, CS060R
CS053R, CS054R
CS062R
CS063R
CS064R, CS065R
1

CS066R
CS068R, 1CS069R
CS150R, CS151R
1

40 SERIES - OME14, OME141


1
45 SERIES - OME201
1
60 SERIES - OME113A, OME1131A
1
60 SERIES - OME113B, OME1131B
1
75 SERIES - OME39, OME391, OME3911, OME39111
1
HILUX - OME17, OME171, OME1711
1
PATROL M60 - OME4, OME41
1
78/79 SERIES - OME49, OME491, OME492, OME493
1
PATROL Y60, Y61 CAB CHASSIS - OME61A, OME611A
1
PATROL Y60, Y61 CAB CHASSIS - OME61B, OME611B 1
1
HJ60 - OME221A
1
HJ60 - OME221B
1
HILUX - OME180, OME18, OME181, OME1811
1
TRITON / PAJERO - OME22, OME222
1
ISUZU / RODEO 2003 - OMEROD4, OMEROD5
1
MAZDA / FORD UTE - OME26, OME261
1
ISUZU / RODEO - OMEROD1, OMEROD11, OMEROD111
1
NAVARA D21, D22 - OMENN1, OMENN11, OMENN2
JEEP XJ - 75mm
JEEP XJ - 75mm
JEEP XJ - OMEJC1A1, OMEJC2A
1
JEEP XJ - OMEJC1B, OMEJC2B
1
JEEP YJ - OMEJ1R, OMEJ2R
1
SUZUKI SIERRA - OMES2, OMES21
HILUX 2005 ON
RANGER / BT-50 12/2006 TO 2011
TRITON ML & MN 2006 ON
COLORADO, DMAX 2008 ON, RODEO 2003 ON
COLORADO, DMAX 2008 ON, RODEO 2003 ON
AMAROK 2010 ON
78/79 SERIES
RANGER / BT-50 2011 ON
NAVARA D40

1. When remaining stock of OME P/No. is exhausted no further product will be available.

PAGE 124

SPECIFICATIONS - LEAF SPRINGS


REPLACEMENT CENTRE BOLTS
Centre
Head
Bolt Part
Diameter
No.
A
UCB1
17
UCB2
15
UCB3
14
UCB4
14

Head
Depth
B
10
15
11
8

Dimension Details
Shank
Shank
Thread
Length Diameter Length
C
D
E
90
9.5
50
90
9.5
50
70
9.5
50
110
9.5
50

Thread

Spring Part No.

3/8 UNF
3/8 UNF
3/8 UNF
3/8 UNF

CS011R, 12R
CS004RA/B, 17RA/B
CS003F, 4F, 5F
CS003R, 6R, 7R, 8R
CS006F, 07F, 10FA/B, 11FA/B, 22R, 23R, 40R, 41R, 42R, 53R,
54R
CS009R, 10R, 18R, 19R, 20R, 21R
CS008FA/B, 9FA/B, 12FA/B, 13FA/B, 38R, 39R
CS001F, 2F, 1R, 2R, 33RA/B, 34RA/B, 35RA/B
CS014F, 36R, 37R
CS008R, 48R
CS016RA/B
CS028R
CS030R, 31R, 32R
CS030R, 31R, 32R, 143R, 43R-15, 144R, 145R, 46RA/B, 171R
1
CS024R, 125R, 62R, 63R
CS028R, 29R
1
CS013R, 114R, 115R, 26R, 27R, 47R, 57R, 58R, 64R, 65R, 166R
1
CS015F, 18F
CS018R, 149R, 150R, 151R, 56R, 60R, 150R, 151R
CS018F
EL077R With Overload Leaf

UCB5

14

70

9.5

50

3/8 UNF

UCB6
UCB7
UCB8
UCB09
UCB10
UCB11
UCB12
UCB13
UCB14
UCB15
UCB16
UCB17
UCB18
UCB19
UCB20
UCB21

14
14
12
13
14
17
11
14
14
11.5
11
14
16
14
16
14

8
5
9
10
8
10
8
6
6
9
8
8
8
8
8
8

80
55
75
55
120
115
70
70
80
72
80
90
50
95
62
155

7.9
7.9
7.9
7.9
9.5
9.5
7.9
9.5
9.5
7.9
7.9
9.5
10
10
10
10

50
35
50
40
40
40
40
40
40
30
40
50
30
45
45
50

5/16 UNF
5/16 UNF
5/16 UNF
5/16 UNF
3/8 UNF
3/8 UNF
5/16 UNF
3/8 UNF
3/8 UNF
5/16 UNF
5/16 UNF
3/8 UNF
M10
M10
M10
M10

1. When remaining stock of OME P/No. is exhausted


no further product will be available.

LEAF SPRING SERVICE PARTS


SPRING EYE SLEEVES
ID
OD
(MM)
(MM)
CBH154028
15
40
CBH27532569
27.5
32.5
CBH303549
30
35
CBH303559
30
35
CBH31536559
31.5
36.5
CBH31536569
31.5
36.5
CBH32737759
32.7
37.7
CBH354069
35
40
CBH37542559
37.5
42.5
CBH39544559
39.5
44.5
CBH404549
40
45
CBH404559
40
45
CBH404569
40
45

LENGTH
(MM)
28
69
49
59
59
69
59
69
59
59
49
59
69

SPRING CLIPS
LEAF
CLIP
PART NUMBER
WIDTH WIDTH
(MM)
(MM)
2512074
70
25
2516474
70
25

CLIP
LENGTH
(MM)
120
164

PART NUMBER

BONDED RUBBER BUSHES


ID
OD
(MM)
(MM)
CBH14405970
14
40
CBH14406073
14
40
CBH145357889
14.5
35
CBH148517689
14.8
51
CBH16455689
16
45
CBH185396489
18.5
39
CBH18544489
18
54
PART NUMBER

LENGTH
(MM)
59/70
60/73
78/89
76/89
56/89
64/89
44/89

LEAF LINER KITS


PART NUMBER
DESCRIPTION
IL01YE (Round)
Inter Leaf Liners x 6 Pieces
SLK60 (60mm Wide)
Noise - Service Liners x 4 Pieces
SLK70 (70mm Wide)
Noise - Service Liners x 4 Pieces
SLO0350213
Inter Leaf Liners Small (Each)
SLO0530213
Inter Leaf Liners Large (Each)
RIVETS
PART NUMBER
3822
3824

PAGE 125

SIZE
3/8
3/8

LENGTH
(MM)
22
24

SPECIFICATIONS - LEAF SPRINGS


U BOLTS
OE spring stack height must be compared to OME spring before final
U Bolt selection as OE spring stack heights may vary from model to model.

PART NO.

OMEU51
OMEU52
OMEU53
OMEU53A
OMEU53B
OMEU54
OMEU55
OMEU56
OMEU57
OMEU58
OMEU58B
OMEU59A
OMEU59B
OMEU59C
OMEU59D
OMEU60
OMEU61
OMEU61B
OMEU62
OMEU63
OMEU64
OMEU65
OMEU66
OMEU66A
OMEU66B
OMEU67
OMEU68
OMEU69
OMEU69A
OMEU70
OMEU70A
OMEU71
OMEU72
OMEU73
OMEU76
OMEU77
OMEU78
OMEU79
OMEU80

A
LEG
LENGTH
mm
210
200
168
185
200
175
218
100
190
210
242
197
225
240
197
150
147
160
145
190
260
215
190
210
230
350
275
235
260
205
230
150
200
125
170
325
410
295
380

B
LEG
CENTRE
mm
85
76
75
75
75
85
97
75
88
110
110
97
97
97
97
81
87
87
73
74
125
97
103
103
102
107
107
95
95
95
95
82
97
91
84
97
97
107
107

C
THREAD
DIA
mm
14
14
14
14
14
12
14
12
12
14
14
14
14
14
14
11
10
10
10
12
14
14
14
14
14
16
16
14
14
14
14
12
14
10
12
16
16
16
16

D
THREAD
LENGTH
mm
70
75
70
65
70
70
70
50
70
75
75
75
75
75
90
70
60
70
70
50
90
75
60
60
60
75
75
65
65
55
55
60
90
40
50
110
110
110
110

THREAD
PITCH
1.5
1.5
1.5
1.5
1.5
1.25
1.5
1.25
1.25
1.5
1.5
1.5
1.5
1.5
1.5
1.27
1.25
1.25
1.25
1.25
1.5
1.5
1.5
1.5
1.5
2.0
2.0
2.0
2.0
2.0
2.0
1.5
1.5
1.25
1.5
2.0
2.0
2.0
2.0

PAGE 126

E
TOP
TYPE

REC.
TORQUE
Lbs.ft.
SQUARE
93
FLAT
93
SQUARE
93
SQUARE
93
SQUARE
93
ROUND
58
SQUARE
93
SQUARE
58
ROUND
58
ROUND
93
ROUND
93
ROUND
93
ROUND
93
ROUND
93
ROUND
93
ROUND
45
ROUND
34
ROUND
34
ROUND
34
SQUARE
58
ROUND
93
ROUND
93
ROUND
93
ROUND
93
ROUND
93
ROUND
145
ROUND
145
ROUND
93
ROUND
93
SQUARE
93
SQUARE
93
SQUARE
58
ROUND
93
ROUND
34
SQUARE
58
SEMI ROUND
145
SEMI ROUND
145
ROUND
145
ROUND
145

REC.
TORQUE
Nm
126
126
126
126
126
79
126
79
79
126
126
126
126
126
126
61
45
45
45
79
126
126
126
126
126
197
197
126
126
126
126
79
126
45
79
197
197
197
197

SPECIFICATIONS - LEAF SPRINGS


LEAF SPRING TRIM PACKERS
(Mild Steel 5mm Thick)
PART No.
TP01
TP02
TP03
TP04
TP05

WIDTH
70mm
70mm
60mm
60mm
50mm

LENGTH
140mm
140mm
140mm
140mm
120mm

HOLE DIA.
10.3mm
8.7mm
10.3mm
8.7mm
8.7mm

APPLICATIONS
TOYOTA 60, 75, NISSAN GQ / FORD MAVERICK CAB CHASSIS & NISSAN GQ UTE
TOYOTA 40, 42, 45, 47
NISSAN MQ, MITSUBISHI PAJERO, TRITON, L200
TOYOTA HILUX, 4RUNNER
SUZUKI SIERRA, SAMURAI (SJ413), SANTANA SAMURAI, HOLDEN DROVER

To be used to correct left to right trim problems. Maximum 2 plates (10mm). Order centre bolt separately.
Refer Manual for Instructions.

CLIP LINER KITS FOR LEAF SPRINGS


Kit Part No.
CLK11
CLK113A
CLK113B
CLK13
CLK14
CLK17
CLK18
CLK201
CLK22
CLK221
CLK3
CLK39
CLK4
CLK57
CLK6
CLK9
CLKJ1
CLKJ2
CLKNN
CLKROD
CLK13D
CLK15D
CLK26D
CLK33D
CLK38D
CLK40D
CLK43D
CLK48D
CLK55D
CLK57D
CLK58D

Contents: Clip Liner Size & Quantity


20mm X 4
30mm X 4, 90mm X 2
30mm X 4, 80mm X 2
40mm X 4
30mm X 4, 60mm X 2
35mm X 4, 70mm X 2
30mm X 4, 90mm X 2
40mm X 4, 80mm X 2
35mm X 4, 40mm X 2
20mm X 4, 40mm X 2
30mm X 4
50mm X 4, 80mm X 2
40mm X 4
30mm X 4, 35mm X 2
45mm X 4, 95mm X 2
35mm X 2, 30mm X 2
25mm X 4
30mm X 4, 80mm X 2
80mm X 2
30mm X 4, 70mm X 2
35mm X 4
55mm X 4, 150mm X 2
45mm X 2, 95mm X 2
40mm X 4, 85mm X 2
20mm X 4, 65mm X 2
60mm X 2
35mm X 2, 45mm X 4, 85mm X 2
47mm X 2
40mm X 2, 50mm X 2
35mm X 2, 120mm X 2
45mm X 2, 115mm X 2

To Suit OME
1
OME110, 11, 111, J1F
1
OME113A, 1131A
1
OME113B, 1131B
1
OME13, 131
1
OME14, 141
1
OME17, 171
1
OME18, 181, 1811
1
OME201
1
OME22, 222
1
OME221A/B
1
OME3A/B, 31A/B, JC1A/B
1
OME39, 391, 3911, 39111
1
OME4, 41
1
OME67, 671
1
OME6A/B, 61A/B, 611A/B
1
OME91A/B, 99A/B
1
OMEJ1R
OMEJC2A, 1OMEJC2B
1
OMENN1, NN11, NN2
1
OMEROD1, ROD11, ROD4, ROD5

OME26, 261

1. When remaining stock of OME P/No. is exhausted no further product will be available.

INTER-LEAF LINER KIT FOR LEAF SPRINGS


IL01YE
SLK60
SLK70

6 LINERS PER KIT


4 LEAF SLEEVES TO SUIT 60MM WIDTH
4 LEAF SLEEVES TO SUIT 70MM WIDTH

LEAF SPRING CENTRE BOLT SLEEVES


Part No.
CBS01
CBS02

Length mm OD mm
15
25
10
19

ID mm
15
16.8

Application
LandCruiser 60 series rear
GQ Patrol cab chassis front

PAGE 127

To Suit
CS003F, 4F, 5F
CS004RA, 5RA
CS004RB, 5RB
CS001F, 2F
CS001R, 2R
CS009R, 10R, 28R, 29R, 53R, 54R
CS018R, 19R, 20R
CS003R
CS022R, 23R
CS017RA/B
CS010FA/B, 11FA/B, 34RA/B
CS006R, 7R, 8R, 168R
CS011R, 12R, 149R, 56R, 61R
CS006F, 7F
CS016RA/B, 42R, 46RA/B, 47R
CS008FA/B, 9FA/B
CS036R
CS035RA/B
CS030R, 31R, 32R
1
CS024R, 125R, 62R, 63R
CS013FA/B, 14F
1
CS013R, 114R, 115R, 60R, 166R, 169R
CS026R, 27R
CS033RA, CS033RB, 150R, 151R
CS038R, 39R
CS040R, 41R
1
CS043R, 144R, 145R, 171R
CS048R
CS055R
CS057R
CS058R, 70R

SPECIFICATIONS - LEAF SPRINGS


LEAF SPRINGS
Part No.
CS001F
CS001R
CS002F
CS002R
CS003F
CS003R
CS004F
CS004RA
CS004RB
CS005F
CS005RA
CS005RB
CS006F
CS006R
CS007F
CS007R
CS008FA
CS008FB
CS008R
CS009FA
CS009FB
CS009R
CS010FA
CS010FB
CS010R
CS011FA
CS011FB
CS011R
CS012FA
CS012FB
CS012R
CS013FA
CS013FB
1
CS013R
CS014F
1
+CS014R
1
+CS015R
CS016F
CS016RA
CS016RB
CS017RA
CS017RB
CS018F
*CS018R
CS019R
CS020R
CS021R
CS022R
+CS023R
1
CS024R
CS026R

OME Part No.


1

OME13
OME14
1
OME131
1
OME141
1
OME110
1
OME201
1
OME11
1
OME113A
1
OME113B
1
OME111
1
OME1131A
1
OME1131B
1
OME67
1
OME391
1
OME671
1
OME3911
1
OME99A
1
OME99B
1
OME39111
1
OME91A
1
OME91B
1
OME17
1
OME3A
1
OME3B
1
OME171
1
OME31A
1
OME31B
1
OME4
1
OMES1A
OMES1B
1
OME41
N/A
N/A
1
OME491
1
OMEJ1F
1
+OME492
1
+OME493
N/A
1
OME611A
1
OME611B
1
OME221A
1
OME221B1
N/A
1
*OME180
1
OME18
1
OME181
1
OME1811
1
OME22
1
+OME222
1
OMEROD4
1
OME26
1

Stack
Height
(mm)

No. of
Leaves

Eye Dia. mm
Front
Rear

Weight
(kg)

48.0
43.0
54.0
49.0
30.0
81.0
36.0
58.0
58.0
42.0
64.0
64.0
43.0
82.0
49.0
89.0
32.5
32.5
96.0
39.0
39.0
48.0
43.0
43.0
54.5
49.0
49.0
56.0
24.4
24.4
63.0
30.0
30.0
68.0
26.0
68.0
76.0
56.0
82.0
82.0
48.0
48.0
58.0
52.5
52.5
59.0
65.5
41.0
58.0
54.0
59.0

8
5+1
9
6+1
5
6+3
6
6+2
6+2
7
7+2
7+2
7
7+3
8
8+3
5
5
9+3
6
6
4+2
7
7
5+2
8
8
8
4
4
9
5
5
5+2
4
5+2
6+2
8
7+3
7+3
8
8
7
3+3
3+3
4+3
5+3
5+1
6+2
4+2
4+3

35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
40.0
35.0
40.0
30.0
30.0
40.0
30.0
30.0
30.0
32.5
32.5
30.0
32.5
32.5
32.5
30.0
30.0
32.5
30.0
30.0
40.0
31.4
40.0
40.0
32.7
40.0
40.0
35.0
35.0
51.5
39.0
39.0
39.5
39.0
31.5
31.5
39.0
32.7

23.0
21.5
27.0
25.6
15.5
45.4
17.7
31.6
31.6
21.5
36.0
36.0
21.6
46.8
25.5
52.2
14.8
14.8
59.5
18.4
18.4
20.0
18.9
18.9
24.2
22.3
22.3
26.8
8.1
8.1
30.2
10.4
10.4
47.9
11.0
47.9
51.5
27.0
50.8
50.8
25.5
25.5
37.7
25.0
27.3
30.6
31.0
22.0
29.5
22.0
26.3

35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
40.0
35.0
40.0
30.0
30.0
40.0
30.0
30.0
30.0
32.5
32.5
30.0
32.5
32.5
32.5
40.0
40.0
32.5
40.0
40.0
40.0
37.6
40.0
40.0
40.0
40.0
40.0
35.0
35.0
41.5
30.0
30.0
30.0
30.0
27.5
27.5
30.0
32.7

Primary
Free
Camber mm
165
225
165
225
200
235
196
250
230
196
250
230
220
240
220
240
170
150
240
170
150
230
215
200
230
215
200
275
125
110
275
125
110
268
210
268
268
229
250
235
250
230
202
215
235
235
235
195
195
181
164

Spring Rate
lbf / in
350
300 / 450
398
357 / 496
220
510 / 710
257
268 / 570
268 / 570
305
314 / 617
314 / 617
302
388 / 610
348
455 / 600
208
208
500 / 656
254
254
217 / 388
283
283
285 / 445
343
343
211
207
207
240
247
247
279 / 548
148
279 / 548
325 / 680
337
325 / 585
325 / 585
255
255
431
125 / 485
125 / 485
160 / 540
274 / 571
194 / 388
230 / 570
205 / 450
177 / 616

N / mm
61.3
52.5 / 79
69.8
62.5 / 87
38.5
90 / 125
45
47.0 / 100
47.0 / 100
53.5
55 / 108
55 / 108
53
68 / 107
61
80 / 105
36.5
36.5
88 / 115
44.5
44.5
38.0 / 68.0
49.6
49.6
50.0 / 78.0
60
60
37
36.3
36.3
42
27.9
27.9
52 / 96
26
52 / 96
57 / 119
59
57 / 103
57 / 103
44.7
44.7
75.5
22 / 85
22 / 85
28 / 95
48 / 100
34.0 / 68.0
41 / 100
36 / 79
31 / 108

Free Camber is measured from top of eye (not centre line) to main leaf at centre bolt. Allow 3mm tolerance either side.

*These springs have a 20mm lower 2nd Stage than other springs in the series. + These springs have a 20mm higher 2nd stage than other springs in this series.
1. When remaining stock of OME P/No. is exhausted no further product will be available.

PAGE 128

cont.

SPECIFICATIONS - LEAF SPRINGS


LEAF SPRINGS
Part No.
CS027R
CS028R
+CS029R
CS030R
CS031R
*CS032R
CS034RA
CS034RB
CS035RA
CS035RB
CS036R
CS037R
CS038R
CS039R
CS040R
CS041R
CS042R
1
CS043R
CS043R-15
1
CS044R
1
+CS045R
CS046RA
CS046RB
CS047R
CS048R
1
CS049R
1
CS051R / CS151R
CS053R
CS054R
CS055R
CS056R
CS057R
CS058R
CS059R
CS060R
CS061R
CS062R
CS063R
CS064R
CS065R
1
CS066R
1
CS068R
1
CS069R
CS070R
1
CS071R
CS150R
EL013R
EL014R
EL015R
EL043R
EL044R

OME Part No.


1

OME261
OMEROD11
1
+OMEROD111
1
OMENN1
1
OMENN11
1
*OMENN2
1
OMEJC1A
1
OMEJC1B
OMEJC2A
1
OMEJC2B
1
OMEJ1R
1
OMEJ2R
1
OMES2
1
OMES21
1
OME19
1
OME191
1
OME36
N/A
N/A
N/A
N/A
1
OME15A
1
OME15B
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1

CS013R
CS014R
1
CS015R
1
CS043R
1
CS044R
1

Stack
Height
(mm)

No. of
Leaves

Eye Dia. mm
Front
Rear

Weight
(kg)

65.5
48.0
60.5
52.5
59.0
52.5
32.5
32.5
37.0
37.0
32.5
32.5
36.0
42.0
29.0
35.0
45.0
50.0
50.0
50.0
57.0
52.0
52.0
57.0
50.0
45.0
67.0
35.0
41.0
65.0
37.0
59.0
66.0
55.0
70.0
58.0
60.0
64.0
58.0
69.0
92.0
66.0
80.0
83.0
64.0
59.0
68.0
68.0
76.0
50.0
50.0

5+3
4+2
4+3
3+3
4+3
3+3
5
5
4+1
4+1
5
5
3+2
4+2
3+1
4+1
4+1
4+2
4+2
4+2
5+2
5+2
5+2
5+2
3+2
4+1
5+2
4+1
5+1
4+2
3+1
4+2
5+2
4+1
5+2
4+2
5+2
5+2
4+2
5+2
8+2
5+2
6+2
7+2
6+2
4+2
5+2
5+2
6+2
4+2
4+2

32.7
39.0
39.0
40.0
40.0
40.0
62.0
62.0
62.0
62.0
37.6
37.0
40.0
40.0
31.5
31.5
46.8
40.0
40.0
40.0
40.0
40.5
40.5
40.0
40.0
40.0
40.0
31.5
30.0
40.0
40.0
40.0
40.0
51.0
40.0
40.0
39.0
39.0
60.0
60.0
40.0
40.0
40.0
40.0
40.0
40.0
40.0
40.0
40.0
40.0
40.0

30.1
22.5
25.4
22.1
25.5
22.1
18.2
18.2
20.9
20.9
13.7
13.8
9.8
12.3
16.4
16.4
28.0
24.0
24.0
24.0
27.5
26.7
26.7
32.4
32.5
25.0
36.3
20.3
24.3
36.5
20.0
36.6
42.8
22.9
33.1
24.9
26.0
28.0
39.2
48.2
59.6
33.1
37.0
50.0
31.1
30.9
47.2
47.2
53.9
22.6
22.6

32.7
30.0
30.0
32.5
32.5
32.5
43.5
43.5
43.5
43.5
31.4
31.0
30.0
30.0
27.5
27.5
31.0
30.0
30.0
30.0
30.0
30.0
30.0
40.0
40.0
32.7
33.4
27.5
27.5
40.0
32.7
40.0
40.0
43.0
32.7
32.7
30.0
30.0
46.0
46.0
40.0
32.7
32.7
40.0
30.0
33.4
40.0
40.0
40.0
30.0
30.0

Primary
Free
Camber mm
164
250
250
170
170
170
230
205
235
210
205
185
175
175
211
211
210
194
179
204
204
222
209
207
275
173
177
193
193
190
173
225
260
265
138
208
223
226
266
266
266
163
148
253
199
177
253
280
272
175
186

Spring Rate
lbf / in
217 / 662
170 / 457
216 / 616
126 / 531
165 / 571
126 / 411
148
148
137 / 257
137 / 257
188
188
171 / 291
228 / 348
148 / 245
200 / 296
228 / 310
170 / 340
170 / 340
170 / 340
204 / 361
114 / 194
114 / 194
182 / 392
225 / 416
212 / 450
244 / 535
166 / 321
209 / 365
205 / 330
147 / 371
234 / 627
300 / 694
242 / 338
277 / 608
186 / 352
215 / 459
294 / 610
169 / 445
267 / 582
412 / 679
277 / 608
338 / 707
408 / 684
258 / 434
192 / 481
245 / 510
245 / 510
294 /542
170 / 340
170 / 340

N / mm
38 / 116
30 / 80
38 / 108
22 / 93
29 / 100
22 / 72
26
26
24 / 45
24 / 45
33
33
30 / 51
40 / 61
26 / 43
35 / 52
40 / 55
30 / 60
30 / 60
30 / 60
35.8 / 63.8
20 / 34
20 / 34
32 / 69
39 / 73
37 / 79
43 / 94
29 / 56
37 / 64
36 / 58
26 / 65
41 / 110
53 / 122
43 / 59
49 / 107
32.7 / 61.7
38 / 80
52 / 107
30 / 78
47 / 102
72 / 119
49 / 107
59 / 124
71 / 120
42 / 76
34 / 84
43 / 90
43 / 90
52 / 95
30 / 60
30 / 60

Free Camber is measured from top of eye (not centre line) to main leaf at centre bolt. Allow 3mm tolerance either side.

*These springs have a 20mm lower 2nd Stage than other springs in the series. + These springs have a 20mm higher 2nd stage than other springs in this series.
1. When remaining stock of OME P/No. is exhausted no further product will be available.

PAGE 129

cont.

SPECIFICATIONS - LEAF SPRINGS


LEAF SPRINGS
Part No.
EL045R
EL049R
EL066R
EL068R
EL069R
EL071R
EL072R
EL073R
EL074R
EL077R
EL079R
EL080R
EL081R
EL082R

OME Part No.


1

CS045R
CS049R
1
CS066R
1
CS068R
1
CS069R
1
CS071R
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1

Stack
Height
(mm)

No. of
Leaves

Eye Dia. mm
Front
Rear

Weight
(kg)

57.0
44.0
92.0
66.0
74.0
64.0
53.0
61.0
69.0
TBA
68.0
68.0
76.0
92.0

5+2
4+1
8+2
5+2
6+2
6+2
3+2
4+2
5+2
TBA
5+2
5+2
6+2
8+2

40.0
40.0
40.0
40.0
40.0
40.0
40.0
40.0
40.0
TBA
40.0
40.0
40.0
40.0

26.9
24.1
58.2
32.2
36.0
30.5
27.8
32.7
37.5
TBA
47.2
47.2
54.0
58.2

30.0
32.7
40.0
32.7
32.7
30.0
30.0
30.0
30.0
TBA
40.0
40.0
40.0
40.0

Primary
Free
Camber mm
206
161
263
155
147
200
199
203
202
TBA
243
255
255
247

Free Camber is measured from top of eye (not centre line) to main leaf at centre bolt. Allow 3mm tolerance either side.
1. When remaining stock of OME P/No. is exhausted no further product will be available.

PAGE 130

Spring Rate
lbf / in
204 / 361
218 / 403
412 / 680
277 / 608
338 / 707
258 / 434
193 / 432
250 / 515
307 / 544
TBA
245 / 510
245 / 510
325 / 689
412 / 678

N / mm
36 / 63
38 / 71
72 / 119
49 / 107
59 / 124
45 / 76
34 / 76
44 / 90
54 / 101
TBA
43 / 89
43 / 89
57 / 121
72 / 119

SPECIFICATIONS - COIL SPRINGS


COIL SPRINGS
Spring Number
2105
2106
2412
2413
2414
2415
2416
2417
2418
2419
2420
2421
2422
2423
2500
2501
2502
2503
2504
2505
2506
2507
2508
2509
2510
2511
2512
2513
2516
2517
2518
2519
2520
2523
2524
2525
2526
2527
2528
2529
2530
2531
2532
2533
2534
2535
2536
2538
2539
2540
2601
2602
2603
2604
2605
2606
2607
2608

X5K
Steel
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X

Bar Dia.
mm
19
21
17
17
18
19
19
19.5
18
18
19
19
19
19.5
14.5
15
16
15
14.5
15
15
15
15
17
15
13.5
17.5
14.5
16
16
14.5
15.5
15
16
15
15
14.5
19
16
14.5
16
14
12
16
17
14
17
17
13.5
16
18
16
17
17
18
18
16.5
16.5

Free Height mm
A
B
475
485
460
470
460
445
485
470
510
495
510
495
535
520
560
545
505
515
530
540
555
565
480
490
505
515
530
540
385
385
350
350
350
350
342
342
355
355
330
330
330
330
338
338
315
315
360
360
360
360
345
345
305
305
345
345
270
270
280
280
325
325
355
355
360
360
300
300
255
255
340
340
385
385
385
385
310
310
375
375
335
335
315
315
310
310
450
450
360
360
370
370
265
260
265
260
345
345
300
300
350
350
392
392
410
410
400
400
315
315
320
320
370
370
380
380

Number
Of Turns
9.0
8.3
8.0
8.0
9.5
7.7
7.7
8.3
9.0
9.0
10.75
7.7
7.7
8.3
5.4
7.3
6.0
7.0
5.4
7.3
5.1
5.1
5.6
5.4
7.15
6.6
6.25
6.63
4.7
4.7
8.6
5.7
6.6
8.0
5.7
5.75
6.25
5.0
5.5
7.51
7.25
6.5
7.75
11.0
7.4
7.5
6.5
6.5
5.9
7.0
8.35
8.22
7.0
6.0
7.75
7.75
9.5
9.5

Coil weight
(kg)
8.5
11.3
6.1
6.1
8.3
8.5
8.5
9.9
7.5
7.5
10.0
8.5
8.5
9.9
3.4
4.3
4.3
4.1
3.4
4.3
3.4
3.5
3.6
4.7
4.1
2.8
4.1
3.3
3.5
3.5
3.4
4.1
3.9
4.1
2.8
3.8
3.5
6.5
3.5
3.6
4.2
3.0
2.4
5.3
5.1
3.3
3.9
3.9
2.7
3.7
5.5
5.6
6.4
5.5
5.1
5.1
5.3
5.3

PAGE 131

Spring Rate
lbf / in
N / mm
350
61
400 / 440
70 / 77
250
44
250
44
250
44
290
51
290
51
290
51
300
52
300
52
300
52
280
49
280
49
280
49
155
27
175
31
245
43
185
32
155
27
175
31
180
32
180
32
180
32
250
44
180
32
190
33
500
88
250
44
260
46
260
46
340
60
190
33
180
32
500
88
200
35
215
38
190
33
240
42
310
54
230
40
350
61
230
40
140
25
355
62
330
58
200
35
650
114
650
114
180
32
420
74
650
114
180
32
188
33
227
38
730
128
730
128
480
84
480
84

OE Spring
Rate Lbs
160
170
200
200
200
180
180
180
160
160
160
170
170
170
130
130
130
130
130
130
130
160
160
200
140
160
420
200
200
200
280
140
150
440
160
160
150
180
260
180
300
190
100
260
280
160
450
450
150
350
540
150
140
140
680
680
450
450
cont.

SPECIFICATIONS - COIL SPRINGS


COIL SPRINGS
Spring Number
2609
2610
2611
2612
2613
2614
2615
2616
2617
2618
2619
2620
2621
2622
2623
2624
2625
2626
2627
2628
2629
2630
2631
2640
2641
2642
2643
2700
2701
2702
2703
2704
2705
2720
2721
2722
2723
2724
2725
2730
2731
2743
2744
2745
2746
2751
2752
2754
2755
2760
2761
2762
2763
2764
2765
2766
2767
2768

X5K
Steel
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X

Bar Dia.
mm
19
20
18
20
20
20
13
14
15
16
14
15
14
14.5
15
15
17
13
14
14
14
15
17.5
17.5
18
14
14.5
18
19
18.5
19
18
19
18.5
18.5
19
20
21
22
15.5
15.5
21
18
19
20
15
17
20
18
15
15
17.5
18
16
22
16
16
20

Free Height mm
A
B
440
440
430
430
310
310
415
415
435
435
425
425
510
510
490
490
430
430
435
435
515
515
450
450
520
520
375
375
375
375
365
365
345
345
500
500
475
475
505
505
505
505
405
405
375
375
305
305
310
310
540
540
460
460
420
420
425
425
430
430
435
435
410
410
415
415
420
410
440
430
440
430
450
440
445
435
445
435
315
315
300
300
360
360
400
400
390
390
370
370
390
380
440
440
435
435
435
435
395
385
400
390
420
410
420
410
430
420
410
410
420
420
385
375
560
560

Number
Of Turns
8.0
8.0
7.75
10.99
10.99
10.99
10.0
10.5
7.0
7.75
10.5
9.0
9.55
7.0
6.1
6.1
8.5
10.0
10.5
10.5
9.55
7.0
9.9
7.4
7.4
10.5
9.0
8.75
9.48
9.48
9.48
8.8
9.5
8.42
8.42
7.2
7.2
7.2
7.71
5.4
5.0
8.6
9.7
9.7
8.6
6.57
9.0
6.9
6.8
9.0
7.5
8.6
7.8
8.0
8.0
7.52
6.66
11.0

Coil weight
(kg)
7.8
8.7
5.1
8.9
8.9
8.9
3.7
4.6
4.1
5.3
4.6
4.5
4.1
3.6
3.8
3.8
4.8
3.7
4.6
4.6
4.1
4.1
5.9
4.5
4.8
4.6
4.2
5.7
6.9
6.6
6.9
6.6
6.9
8.8
8.8
8.0
8.9
9.8
11.6
3.5
3.1
8.7
6.5
7.2
7.9
3.9
7.7
8.3
6.5
5.2
4.4
7.0
6.7
5.4
11.7
5.0
4.5
10.3

PAGE 132

Spring Rate
lbf / in
N / mm
390
68
460
81
730
128
740
130
740
130
740
130
120
21
135
24
160
28
175
31
135
24
200
35
150
26
210
37
200
35
200
35
540
95
120
21
135
24
135
24
150
26
160
28
580
102
730
128
790
139
135
24
175
31
625
109
720
126
625
109
720
126
625
109
720
126
270 / 350
47 / 61
270 / 350
47 / 61
275
48
340
59
400
70
440
77
240
42
280
49
800
140
530
93
670
117
680
119
225
39
175 / 200
31 / 35
420
74
300
52
180 / 250
32 / 44
200
35
300 / 340
52 / 60
360
63
220
39
540
95
250
44
285
50
450
79

OE Spring
Rate Lbs
330
330
680
680
680
680
120
120
100
100
120
120
120
160
160
160
460
120
120
120
120
100
88
670
670
120
100
500
500
500
500
500
500
170
170
170
170
170
170
200
200
600
480
480
600
200
200
240
240
160
160
170
200
200
240
220
200
220
cont.

SPECIFICATIONS - COIL SPRINGS


COIL SPRINGS
Spring Number
2770 1
2776
2777
2779
2780
2781
2789
2790
2791
2792
2793
2794
2795
2796
2797
2798
2799
2802
2803
2838
2850
2850J
2851
2853
2856
2859
2860
2861
2862
2863
2863J
2864
2865
2866
2868
2869
2870
2871
2872
2873
2874
2875
2876
2880
2881
2882
2883
2884
2885
2886
2887
2888
2889
2890
2891
2892
2895
2895E

X5K
Steel
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X

Bar Dia.
mm
16
14
14.5
15.5
18.5
17
16
17
16
14
15
16
16
16
13
13
16
16
16
18
16.5
17
16
16.5
16
16
17
16
17
18
18.5
19
17
18
20
16.5
14
16
14
16
15
17
14
16
16
16.5
16.5
16.5
16.5
17.5
16.5
16.5
16.5
14.5
15.5
17
16.5
17

Free Height mm
A
B
480
470
410
390
395
375
385
375
470
460
425
415
280
280
378
378
280
280
435
435
350
350
260
255
285
285
255
250
350
350
400
400
353
353
445
445
465
465
420
410
495
505
515
525
475
485
485
485
465
465
470
470
480
490
480
490
460
470
480
490
505
515
480
490
460
460
465
465
480
490
380
380
370
355
410
400
400
400
455
455
408
408
440
440
390
375
365
365
375
375
395
395
375
375
390
390
395
395
402
402
400
400
405
405
400
400
440
430
425
415
400
390
390
390
375
375

Number
Of Turns
10.0
7.0
7.24
7.29
8.68
7.7
7.25
9.35
7.25
9.3
5.2
7.25
6.0
7.25
10.0
10.2
5.5
11.31
10.7
7.5
9.0
9.9
8.18
10.13
10.0
9.25
6.88
10.4
9.0
7.0
7.7
7.2
6.88
9.0
7.15
9.8
8.5
7.25
9.0
8.25
9.0
8.3
8.5
10.2
10.2
11.1
9.75
9.75
9.75
10.6
9.75
9.75
6.21
9.7
9.5
8.9
6.21
6.75

Coil weight
(kg)
6.5
3.6
4.0
4.6
9.0
5.9
3.9
5.2
3.9
4.1
3.7
4.2
4.0
4.2
2.7
3.2
4.5
5.9
5.5
7.7
6.2
7.3
5.3
6.2
5.3
5.3
6.0
6.8
7.8
6.9
9.2
7.8
6.0
8.8
8.8
4.7
3.6
4.9
3.9
5.6
4.5
6.4
3.6
4.7
4.7
5.3
4.7
4.7
4.7
5.9
4.7
4.7
4.6
5.0
5.6
6.4
4.6
5.4

1. When remaining stock of OME P/No. is exhausted no further product will be available.

PAGE 133

Spring Rate
lbf / in
N / mm
260
45
160
28
180
32
225
39
250 / 340
43 / 59
290
51
410
72
500
87
410
72
155
27
165
29
420
73
360
63
420
73
340
59
210
36
200
35
320
56
340
59
205 / 290
36 / 51
220
38
220
38
220
38
275
48
230
40
275
48
220
38
170 / 250
30 / 44
170 / 260
30 / 46
250
43
265
46
320
56
220
38
240 / 300
42 / 52
360
63
590
103
220
38
220
38
190
33
200
35
220
38
240
42
200
35
500
87
500
87
500
87
590
103
590
103
590
103
660
115
590
103
590
103
260
45
190
33
210
37
260 / 380
67
260
45
260
45

OE Spring
Rate Lbs
160
150
150
150
160
160
380
400
380
130
120
330
330
330
300
180
150
205
205
160
160
160
160
160
210
210
170
160
160
170
170
170
170
170
170
500
160
160
160
160
160
170
160
490
490
490
500
500
500
590
500
500
150
150
150
150
150
150
cont.

SPECIFICATIONS - COIL SPRINGS


COIL SPRINGS
Spring Number
2896
2897
2898
2899
2900
2901
2902
2903
2904
2905
2906
2907
2908
2910
2911
2912
2913
2914
2915
2917
2918
2919
2920
2921
2922
2923
2924
2925
2926
2927
2928
2929
2930
2931
2932
2933
2934
2935
2936
2937
2938
2939
2940
2941
2942
2943
2944
2945
2947
2948
2949
2950
2951
2952
2953
2954
2955
2956

X5K
Steel
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X

Bar Dia.
mm
18
19
18
19
15
16
18
16
15
17
15
17
16
17
16
15
15
18
18
21
22
15
14
16
14
16
19
16
16
16
16
16
14
14
14
14
14
14
15
15
18
16
14
15
15.5
15
15
16
16
16
17
16
15
11
16
12
13
16

Free Height mm
A
B
390
390
390
390
400
400
400
400
405
395
395
385
340
340
380
380
410
410
313
313
390
380
370
370
295
295
400
390
400
390
420
420
390
390
330
330
345
345
345
335
338
328
430
430
430
430
385
385
360
360
395
395
340
340
385
385
392
392
394
394
410
410
420
420
475
465
510
500
480
470
495
485
510
500
420
410
420
410
400
400
400
390
525
515
380
370
390
375
380
365
370
360
395
385
350
340
340
340
340
340
370
355
300
300
290
290
345
345
285
285
340
340
350
350
330
330

Number
Of Turns
6.75
6.75
6.75
6.75
6.36
6.25
8.35
7.3
6.8
6.0
9.0
5.25
7.25
7.5
7.5
10.8
9.3
8.1
8.1
7.25
7.25
10.8
8.0
6.8
6.1
6.8
8.1
10.77
10.77
10.3
6.8
10.8
9.8
11.9
11.2
11.2
10.0
9.8
10.0
7.25
7.5
11.65
8.6
7.2
6.58
8.6
8.0
7.5
5.8
5.56
7.1
8.5
8.5
8.3
8.5
8.5
10.0
8.5

Coil weight
(kg)
6.1
6.9
6.1
6.9
4.1
4.6
5.5
5.0
4.2
4.6
5.0
5.0
4.2
6.9
6.0
5.7
4.9
5.5
5.5
8.4
9.3
5.7
3.7
5.2
3.3
5.2
6.2
5.2
5.2
5.0
5.3
6.5
4.2
5.1
4.8
4.8
4.3
4.1
4.8
4.1
7.7
6.6
3.7
4.4
4.2
4.3
4.4
4.7
4.4
4.2
5.6
4.0
3.5
1.8
4.1
2.2
3.0
4.2

PAGE 134

Spring Rate
lbf / in
N / mm
318
56
387
68
318
56
387
68
180
32
220
38
650
114
210
37
170
30
360
63
220 / 270
38
213
37
368
64
150 / 260
26 / 45
140 / 230
24 / 40
180 / 300
31 / 52
180 / 300
31 / 52
650
114
650
114
700 / 900
112 / 158
860 / 1000
151 / 175
200 / 280
35 / 49
190
33
200
35
140
25
200
35
790
138
375
66
375
66
400
70
200
35
240 / 300
42 / 53
162
28
140
25
140
25
140
25
160
28
180
32
220
39
220
39
205 / 290
36 / 51
220
39
190
33
140
25
160
28
230
40
190
33
240
42
170
30
200
35
216
38
540
95
440
77
142
25
540
95
180
32
200
35
500
88

OE Spring
Rate Lbs
150
150
150
150
140
140
560
160
140
300
160
160
300
160
160
160
160
580
580
650
650
160
160
150
120
150
580
320
320
320
150
180
140
140
140
140
140
140
170
170
160
170
140
140
140
150
165
170
150
150
160
420
420
120
420
140
140
420
cont.

SPECIFICATIONS - COIL SPRINGS


COIL SPRINGS
Spring Number
2959
2960
2961
2962
2963
2965
2966
2967
2968
2969
2970
2971
2972
2972E
2973
2974
2974E
2975
2976
2977
2978
2979
2980
2981
2982
2983
2984
2985
2986
2987
2988
2990
2991
2992
2993
2994
2995
2996
2997
2998
2999
3027
3028
3029
3030
3033
3034
3035
3036
3037
3038
3039
3040
3043
3046
3047
3048
3049

X5K
Steel
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X

Bar Dia.
mm
16
15
13
16
11.5
11.5
12
12
14
12
17
17
16
16
16
16
16
16
16
20
20.5
20.5
19
21
19
20
21
21
21
22
22.4
18
19
17
18
21
22
17.5
18
18
18.5
18.5
17
17
20
18
21
22
18
21
22
17
19
19
15.5
14.5
18
20

Free Height mm
A
B
310
310
300
300
340
340
320
320
350
350
365
365
335
315
325
325
370
370
360
360
395
385
405
395
400
385
404
404
415
400
385
370
385
385
425
410
440
425
370
370
370
370
375
375
490
470
480
460
470
450
480
455
480
455
480
460
500
500
500
500
500
500
370
370
365
365
355
345
345
335
335
325
350
340
370
355
360
360
365
365
365
365
325
325
430
420
440
430
435
425
430
420
505
485
505
485
455
445
530
510
530
510
520
530
505
515
530
540
490
490
545
545
350
350
505
515

Number
Of Turns
8.5
8.5
10.0
8.5
10.0
10.0
10.0
9.0
9.35
9.5
6.7
6.66
6.55
6.55
6.55
6.55
6.55
7.45
7.2
7.6
7.6
7.6
9.0
9.0
9.0
9.0
9.0
7.0
8.2
8.1
8.2
8.9
8.9
7.15
6.6
7.25
7.25
7.1
8.72
8.72
8.72
7.6
8.5
8.5
7.5
8.0
9.0
8.1
8.0
9.0
8.1
9.9
8.3
8.3
9.81
10.74
8.72
8.3

Coil weight
(kg)
4.0
3.5
3.0
4.0
2.4
2.4
2.5
2.4
3.7
2.5
5.2
4.5
4.5
4.5
4.5
4.5
4.5
5.0
4.9
7.1
7.6
7.6
10.0
12.3
10.0
11.1
12.3
9.8
10.0
11.0
11.5
6.3
7.1
5.8
6.0
8.4
9.3
6.0
5.5
5.5
5.8
5.4
6.1
6.1
9.0
7.0
12.4
12.4
7.0
12.4
12.4
7.3
9.2
9.2
5.4
5.2
5.5
10.3

PAGE 135

Spring Rate
lbf / in
N / mm
540
95
440
77
200
35
540
95
146
26
146
26
176
31
176
31
210
37
170
30
320
56
320
56
250
44
250
44
250
44
250
44
250
44
220
39
220
39
730
128
790
138.5
790
138.5
250
44
300
53
250
44
300 / 400
44 / 70
360 / 450
63 / 79
470
82
540
94.7
610
107
680
119
530
93
630
110
240
42
280
49
700 / 900
123 / 158
860 / 1000
151 / 175
250
44
800
140
800
140
840
140
800
140
330
58
330
58
270 / 330
47 / 58
320
56
300
52
470
82
320
56
300
52
470
82
220
38.5
250
44
250
44
200
35
150
26
800
140
320
56

OE Spring
Rate Lbs
440
410
150
440
120
120
120
120
120
150
160
160
160
160
160
160
160
160
160
650
650
650
200
200
200
200
200
200
380
380
380
440
440
190
190
600
600
200
700
700
700
680
250
250
190 / 280
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
cont.

SPECIFICATIONS - COIL SPRINGS


COIL SPRINGS
Spring Number
3051
3052
3056
3057
3058
3059
3060
3061
3062
3063
3064
3065
3066
3067
3070
3071
3072
3073
3074
3075
3076
3077
3078
3079
3080
3085
3086
3087
3088
3089
3090
3091
3092
3093
3094
2GQ02A
2GQ02AM
2GQ02B
2GQ02C
2GQ02CM
2GQ02D
2GQ02G
2GQ02J
2GQ02LP

X5K
Steel
X
X
X
X
X
X
XT
X
X
X
X
X
X
X
X
X
X
X
XT
XT
XT
X
XT
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X

Bar Dia.
mm
17
20
16.5
16.5
16.5
15.5
21
16.5
15.5
16
17
19
21
22.4
15.5
15.5
15.5
15.5
20
21.5
21.5
17
20
17.5
18
15.5
16
15
15.5
16
16.5
15
15.5
16.5
18
18
18
19
18
17
18
19
20
19

Free Height mm
A
B
545
555
530
540
360
360
365
365
370
370
480
480
360
360
450
450
450
440
450
440
520
520
515
515
500
500
470
460
445
445
485
485
495
495
460
460
385
385
580
580
605
605
400
390
405
395
310
310
315
315
510
510
505
500
420
420
440
440
445
445
450
450
435
435
425
425
430
430
330
330
465
465
505
490
445
445
480
465
485
470
480
480
475
460
480
465
475
445

Number
Of Turns
9.9
8.3
9.75
9.8
9.8
9.5
8.0
9.85
9.5
9.5
9.53
9.3
9.66
8.30
9.50
9.50
9.50
9.50
8.00
11.95
11.95
8.50
7.50
7.75
7.75
9.50
10.75
7.50
10.25
10.25
10.25
8.18
8.18
8.13
8.72
9.0
8.7
9.0
9.0
9.0
9.0
9.0
9.0
9.0

Coil weight
(kg)
7.3
10.3
4.7
4.7
4.7
5.0
7.9
6.2
6.0
6.5
8.1
10.0
12.9
13.4
5.0
5.0
5.0
5.0
7.0
13.1
13.1
6.1
8.5
4.7
5.0
5.0
6.0
4.5
5.9
6.3
6.7
4.1
4.4
5.0
5.5
9.0
8.7
10.0
9.0
7.9
9.0
10.0
11.1
10.0

Spring Rate
lbf / in
N / mm
220
38.5
320
56
590
103
590
103
590
103
250
44
880
154
250 / 300
44 / 52.5
200
35
225
39.4
175 / 200
30.6 / 35
270 / 330
47 / 58
370 / 430
65 / 75
350 / 650
61 / 114
250
44
250
44
250
44
250
44
750
131
520
91
520
91
330
58
270 / 330
47 / 58
690
121
745
130
250
44
250
44
220
38.5
200 / 260
35 / 46
240 / 300
42 / 53
260 / 330
46 / 58
220
38.5
260
46
320
56
800
140
200
35
220 / 240
39 / 42
250 / 280
44 / 49
200
35
170 / 190
30 / 33
200
35
220 / 350
39 / 61
280 / 310
49 / 54
250 / 280
44 / 49

X5K MICRO-ALLOYED SPRING STEEL is a new generation high strength spring steel grade
designed to withstand higher operating stresses with superior resistance to sag and
improved toughness and corrosion fatigue properties. These properties are enhanced by
additions of Silicon, Chromium, Vanadium Nickel along with lower Carbon than conventional
spring steel grades.

PAGE 136

OE Spring
Rate Lbs
N/A
N/A
580
580
580
220
750
N/A
N/A
N/A
N/A
N/A
N/A
N/A
220
220
220
220
750
N/A
N/A
N/A
N/A
N/A
N/A
220
220
220
200
200
200
220
220
220
700
180
180
180
180
180
180
180
180
180

SPECIFICATIONS - SHOCK ABSORBERS


NITROCHARGER SPORT
UPPER MOUNT BUSH KIT

Part Number

Open Closed
Nitrocharger Length Length
(mm) (mm)
Sport

Type

Original Kit

Bushes only
Replacement

60000
60001
60002
60003
60004
60005
60006
60007
60008
60009
60010
60011
60012 1

LOWER MOUNT BUSH KIT


Type

Original Kit

Bushes only
Replacement

SMP493
N/A
110-110-122
110-110-122
443
298
P4203
E4050-BS
SMP493
SMP493
110-110-122
110-110-122
443
298
P4203
E4050-BS
SMP493
SMP493
110-034-069
OMEB40
612
368
P4204
E4005
SMP493
SMP493
110-034-069
OMEB40
612
368
P4204
E4005
SMP569
N/A
SMP621
OMEB40
580
356
P4184
E4005
SMP569
SMP569
SMP621
OMEB40
580
356
P4184
E4005
SMP649
SMP649
SMP649
SMP649
600
373
E4005
E4005
SMP649
SMP649
SMP649
SMP649
597
373
E4005
E4005
SMP501
OMEB42
SMP501
OMEB42
524
319
P4184
P4184
SMP474
OMEB13
110-034-064
OMEB36
589
349
P4169
E4005
110-034-070
OMEB15
110-034-070
OMEB15
652
403
E4005
E4005
110-034-070
OMEB15
110-034-070
OMEB15
657
403
E4005
E4005
SMP345
OMEB42
SMP345
OMEB42
496
301
P4184
P4184
60013
SMP345
OMEB42
SMP345
OMEB42
496
301
P4184
P4184
60013L
555
322
P4184
SMP345
OMEB42
P4184
SMP345
OMEB42
60014 1
SMP363
OMEB36
SMP363
OMEB40
657
403
E4005
E4005
60015
SMP363
OMEB36
SMP363
OMEB40
657
403
E4005
E4005
60015L
716
426
E4005
SMP363
OMEB36
E4005
SMP363
OMEB40
60016
110-110-076
N/A
110-110-076
N/A
376
262
E4051-S
E4051-S
60017
110-043-071
OMEB14
110-110-100
N/A
559
350
E4001
E4063-S
60018
SMP501
OMEB42
SMP501
OMEB42
617
359
P4184
P4184
60018L
SMP501
OMEB42
SMP501
OMEB42
667
381
P4184
P4184
60019
SMP641
N/A
110-110-076
N/A
582
354
P4158
E4040-BS
60020
SMP501
OMEB42
110-034-070
OMEB36
625
378
P4184
E4005
60020L
SMP501
OMEB42
110-034-070
OMEB36
673
378
P4184
E4005
60021
SMP474
OMEB13
N/A
OMEB10
325
215
P4169
E4026-S
60022
SMP670
OMEB13
110-034-181
110-034-181
363
239
P4205
E4050
60023
OMEB15
110-034-080
624
380
E4005
E4005BS
60024
110-110-066
N/A
110-110-067
N/A
587
368
E4005-S
E4005-T
60024L
627
388
E4005-S
110-110-066
N/A
E4005-T
110-110-067
N/A
60025
110-110-066
N/A
110-110-066
110-110-066
587
368
E4005-S
E4005-BS
60025L
627
388
E4005-S
110-110-066
N/A
E4005-BS
110-110-066
N/A
60026
110-110-066
N/A
110-110-066
110-110-066
593
368
E4005-S
E4005-BS
60027
SMP474
OMEB13
110-034-070
OMEB15
545
338
P4169
E4005
60028
SMP474
OMEB13
110-034-070
OMEB15
545
338
P4169
E4005
60029 1
SMP493
N/A
110-034-069
OMEB40
615
368
P4204
E4005
60030 1
SMP493
N/A
110-034-069
OMEB40
615
368
P4204
E4005
60031
SMP675
OMEB13
110-034-056
OMEB10
385
250
P
E4026-S
60032
*110-034-071
OMEB14
110-034-071
OMEB14
597
365
E4001
E4001
60033
SMP641
N/A
110-110-076
N/A
581
354
P4158
E4051-BS
60034
SMP474
OMEB13
110-034-056
OMEB10
311
208
P4205
E4026-S
60035
SMP516
OMEB14
SMP511
OMEB14
560
345
E4001
E4001
60036
SMP516
OMEB14
SMP511
OMEB14
559
339
E4001
E4001
60037
SMP374
OMEB42
SMP374
OMEB42
553
329
P4184
P4184
60037L
593
349
P4184
SMP374
OMEB42
P4184
SMP374
OMEB42
60038
560
346
E4005
110-034-069
OMEB40
P4184
SMP683
SMP683
60039
560
346
E4005
110-034-069
OMEB40
P4184
SMP683
SMP683
60039L
600
366
E4005
110-034-069
OMEB40
P4184
SMP683
N/A
60040
SMP474
OMEB13
110-034-056
OMEB10
345
225
P4169
E4026-S
60041
SMP474
OMEB13
110-034-077
OMEB17
478
304
P4169
E4001
60042
SMP474
OMEB13
110-034-072
OMEB17
352
232
P4169
E4005-S
60043
110-034-070
OMEB15
110-034-070
OMEB15
660
397
E4005
E4005
60044
110-034-070
OMEB15
110-034-070
OMEB15
640
390
E4005
E4005
60045
N/A
N/A
N/A
N/A
642
382
E - TB
E-S
60046
SMP476
N/A
110-110-088
N/A
565
334
P4169
E4026-TB
Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers.
Note:
*Also supplied with SMP495 spacer kit
cont.
1. When remaining stock of OME P/No. is exhausted no further product will be available.
See page 142 for legend of mount types

PAGE 137

SPECIFICATIONS - SHOCK ABSORBERS


NITROCHARGER SPORT
UPPER MOUNT BUSH KIT

Part Number

Open Closed
Nitrocharger Length Length
(mm) (mm)
Sport

Type

Original Kit

Bushes only
Replacement

LOWER MOUNT BUSH KIT


Type

Original Kit

Bushes only
Replacement

60047
SMP476
N/A
110-110-088
N/A
565
334
P4169
E4026-TB
60047L
678
392
P4169
SMP476
N/A
E4026-TB
110-110-088
N/A
60048
110-110-089
N/A
110-110-056
N/A
559
338
E4026-TB
E4026-S
60049
110-110-089
N/A
110-110-056
N/A
559
338
E4026-TB
E4026-S
60049L
622
366
E4026-TB
110-110-089
N/A
E4026-S
110-110-056
N/A
60050
110-110-071
OMEB14
110-110-071
OMEB14
659
389
E4001
E4001
60051
SMP670
OMEB13
110-110-078
110034078
339
224
P4169
E4026-T
60052
SMP476
N/A
110-110-088
110-110-088
565
344
P4169
E4026-T
60052L
678
392
P4169
SMP476
N/A
E4026-TB
110-110-088
N/A
60053
110-110-089
110-110-089
110-034-056
OMEB10
559
338
E4026-T
E4026-S
60053L
622
366
E4026-TB
110-110-089
N/A
E4026-S
110-034-056
OMEB10
60054
644
384
E4005
SMP517
OMEB36
P4169
SMP474
OMEB13
60055
496
301
P4184
SMP345
OMEB42
P4184
SMP345
OMEB42
60056
110-110-071
OMEB14
N/A
OMEB17
503
312
E4001
E4005-S
60057
SMP516
OMEB14
SMP516
OMEB14
559
339
E4001
E4001
60058
110-110-071
OMEB14
110-110-071
OMEB14
619
369
E4001
E4001
60059
523
329
E4001
110-034-071
OMEB14
E4005-S
110-034-072
OMEB17
60060
528
318
P4205
SMP474
OMEB13
E4050
SMP650
OMEB15
60061
SMP474
OMEB13
NA
OMEB10
485
294
P4169
E4026-S
60062
110-034-064
OMEB15
110-034-064
OMEB15
587
357
E4005
E4005
60063
SMP474
OMEB13
110-034-070
OMEB36
588
348
P4169
E4005
60064
110-034-071
OMEB15
110-034-071
OMEB15
594
360
E4005
E4005
60065
110-034-070
OMEB15
110-034-070
OMEB15
581
356
E4005
E4005
60066
SMP658
OMEB42
N/A
N/A
580
348
P4184
E
60066L
693
404
P4184
SMP658
OMEB42
E
N/A
N/A
60066M
646
382
P4184
SMP658
OMEB42
E
N/A
N/A
60067
N/A
N/A
N/A
N/A
619
368
E-TB
E
60067L
706
422
E-TB
N/A
N/A
E
N/A
N/A
60068
509
314
P4169
SMP474
OMEB13
E4005
110-034-070
OMEB15
60069
576
362
E4057-S
110-110-085
N/A
E4005-S
110-110-086
N/A
60070
SMP501
OMEB42
SMP501
OMEB42
617
359
P4184
P4184
60070L
667
381
P4184
SMP501
OMEB42
P4184
SMP501
OMEB42
60071
SMP501
OMEB42
110-034-070
OMEB36
625
378
P4184
E4005
60071L
673
387
P4184
SMP501
OMEB42
E4005
110-034-070
OMEB36
60072
383
254
P4169
SMP474
OMEB13
E4005-S
110-034-072
OMEB17
60073
549
334
P4169
SMP474
OMEB13
E4005
110-034-064
OMEB36
60074
517
333
E4005-S
110-034-072
OMEB17
E4005
110-034-064
OMEB15
60075
523
329
E4001
110-034-071
OMEB14
E4005-S
110-034-072
OMEB17
60076
523
329
E4001
110-034-071
OMEB14
E4005-S
110-034-072
OMEB17
60077
583
354
P4205
SMP474
OMEB13
E4005-S
110-034-064
OMEB15
60078
583
354
P4205
SMP474
OMEB13
E4005-S
110-034-064
OMEB15
60080
603
368
P4184
SMP569
SMP569
E4005
SMP621
OMEB40
60081
603
368
P4184
SMP569
SMP569
E4005
SMP621
OMEB40
60082
602
368
N/A
N/A
N/A
N/A
N/A
N/A
60083
602
368
N/A
N/A
N/A
N/A
N/A
N/A
60084
560
350
P
SMP705
N/A
E
SMP705
N/A
60085
560
350
P
SMP705
N/A
E
SMP705
N/A
60086
603
368
P4184
SMP569
SMP569
E4005
SMP621
OMEB40
60087
535
330
P4170
SMP312
N/A
E4026-T
SMP487
N/A
60088
580
355
E4057-S
110-110-085
N/A
E4001
110-034-020
OMEB10
60089
569
338
E-4032-S
110-034-070
N/A
P4169
SMP474
OMEB13
60090
508
308
E4005
110-034-070
OMEB15
P4169
SMP474
OMEB13
60091
599
360
P4205
SMP474
OMEB13
E4026-S
110-034-056
N/A
60092
565
345
P14969
SMP476
OMEB13
E4026-T
110-110-038
N/A
60093
562
343
E4003
110-034-076
N/A
E4026-S
110-034-056
OMEB10
60094
469
291
P4184
SMP345
OMEB42
P4184
SMP345
OMEB42
60095
442
284
P4169
SMP474
OMEB13
E4005
110-034-070
OMEB15
Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers.
Note:
See page 142 for legend of mount types
cont.

PAGE 138

SPECIFICATIONS - SHOCK ABSORBERS


NITROCHARGER SPORT
UPPER MOUNT BUSH KIT

Part Number

Open Closed
Nitrocharger Length Length
(mm) (mm)
Sport
60096
60097
60098
60099
60100
60101
60102
60109
60110
60111
60112
60113
60114
60116
60117
60121
60122
60123
60124
60125
60126
60127
61012
61014
61029
61030
90000
90001
90002
90003
90003 (02/11 on)
90004
90005 1
90006
90007
90008
90009
90010
90010 09/13 On
90011
90012
90013
90014
90015
90016
90016 (09/13 On)
90017
90018
90019
90020
90021
90022
90023
90026
91005

531
493
625
509
650
624
624
685
559
665
580
600
610
555
555
620
785
560
585
585
550
550
496
657
615
615
543
404
548
390
390
473
613
474
474
426
319
543
543
548
615
615
458
458
543
543
613
610
505
505
543
495
495
815
613

342
315
365
329
385
380
380
420
350
400
356
365
365
340
340
370
460
340
415
415
385
385
301
403
368
368
413
273
413
287
287
340
432
330
330
306
207
413
413
413
485
485
297
297
413
413
432
455
368
368
413
350
350
665
432

Type
E4005
E4001
P4169
E4001
P
E4005
E4005
E4005
E4001
E4005
P4184
E
P
E4005
E4005
P
E
P4204
P
P
P
P
P4184
E4005
P4204
P4204
P
P
P
P
P
P
P4214
N/A
P
P
P
P
P
P
P
P
P
P
P
P
P4124
P
P
P
P
P
P
P
P4124

LOWER MOUNT BUSH KIT

Original Kit

Bushes only
Replacement

Type

110-064-070
110-034-071
SMP476
110-034-065
SMP493
110-110-113
110-110-113
110-034-070
110-034-071
110-034-070
SMP569
110-A42-139
SMP706
110-034-071
110-034-071
SMP493
SMP657
SMP493
SMP712
SMP712
SMP497
SMP497
SMP345
SMP363
SMP493
SMP493
SMP671
N/A
SMP671
SMP633
SMP633
SMP673
OE
Use OE Bushes
Use OE Bushes
N/A
Use OE Bushes
Use OE Bushes
Use OE Bushes
SMP626
SMP698
SMP698
OE
OE
Use OE Bushes
Use OE Bushes
OE
SMP710
OE
OE
SMP671
Use OE Bushes
Use OE Bushes
SMP719
OE

OMEB15
OMEB14
OMEB13
OMEB14
N/A
OMEB15
OMEB15
OMEB15
OMEB14
OMEB15
N/A
N/A
N/A
OMEB14
OMEB14
N/A
N/A
N/A
N/A
N/A
N/A
OMEB42
OMEB36
N/A
N/A
SMP671
N/A
SMP671
N/A
N/A
N/A
OE
N/A
N/A
N/A
N/A
N/A
N/A
SMP626
N/A
N/A
OE
OE
N/A
N/A
OE
N/A
OE
OE
SMP671
N/A
N/A
N/A
OE

E4005
E4001
E4026-S
E4026-S
E
E4005-BS
E4005-BS
E4005
E4063S
E4005
E4005
P
E
E4005
E4005
E
E
E4051-S
CLEVIS
CLEVIS
CLEVIS
CLEVIS
P4184
E4005
E4005
E4005
E4050-S
N/A
E4050-S
E4063-BS
E4063-BS
E4050-B
E4066
E4055BS
E4055BS
E4055BS
N/A
E4050-S
E4050-S
E4050-S
N/A
N/A
E
E
E4050-S
E4050-S
E4066
E
E
E
E4050-S
N/A
N/A
CLEVIS
E4066

Original Kit

Bushes only
Replacement

110-064-070
110-034-071
110-034-056
110-034-056
110-110-102
110-A42-126
110-A42-126
110-034-070
110-110-100
110-034-070
SMP621
SMP706
110-110-077
110-034-071
110-034-071
110-110-103
110-A42-124
110-110-1031
N/A
N/A
N/A
N/A
SMP345
SMP363
110-034-069
110-034-069
110-110-122
110-110-100
110-110-122
110-110-112
110-110-112
110-110-060
N/A
110-110-075
110-110-075
110-110-075
N/A
110-110-112
110-110-115
110-110-122
N/A
N/A
SMP672
SMP672
110-110-112
110-110-112
N/A
110-110-101
N/A
N/A
110-110-122
110-110-122
110-110-122
N/A
110-110-110

OMEB15
OMEB14
OMEB10
OMEB10
N/A
N/A
N/A
OMEB15
N/A
OMEB15
OMEB40
N/A
N/A
OMEB14
OMEB14
N/A
N/A
110-110-1031
N/A
N/A
N/A
N/A
OMEB42
OMEB40
OMEB40
OMEB40
110-110-122
110-110-100
110-110-122
110-110-112
110-110-100
110-110-060
N/A
N/A
110-110-075
N/A
N/A
110-110-112
110-110-115
110-110-115
N/A
N/A
N/A
N/A
110-110-112
110-110-115
N/A
N/A
N/A
N/A
110-110-122
N/A
N/A
N/A
N/A

Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers.
Note:
1. When remaining stock of OME P/No. is exhausted no further product will be available.
See page 142 for legend of mount types

PAGE 139

SPECIFICATIONS - SHOCK ABSORBERS


NITROCHARGERS
UPPER MOUNT BUSH KIT

Part Number

Open Closed
Length Length
Nitrocharger
(mm) (mm)
N151/N15C1
N16
N17
N18
N19/N19C1
N211
N22F1
N23F1
N25
N26F1
N271
N281
N29/N29C1
N301
N30E
N31S1
N32
N33
N341
N35/N35C1
N36/N36C1
N37
N38S
N391/N39C1
N401/N40C1
N41
N42
N43
N44
N45F1
N461
N47
N48
N49
N501
N511
N521/N52F1
N531/N53C1
N54
N551
N56
N57G1
N581
N59
N60G1
N61/N61C1
N62G1
N63G1
N641/N64C1
N65
N66/N66C1
N67
N681
N68E1

517
477
632
340
492
492
656
492
642
381
560
504
656
618
659
501
500
625
509
568
562
591
473
562
556
499
594
485
560
554
560
406
560
446
584
365
425
628
554
585
554
340
325
559
340
607
507
478
478
385
568
562
640
660

327
352
382
225
292
292
396
292
377
245
340
309
396
368
389
318
315
365
329
348
342
366
339
342
336
309
359
295
340
324
340
251
335
271
349
235
265
378
339
345
339
225
215
339
225
367
317
299
299
245
335
339
384
394

Type
E4005-S
P4184
E4026-T
P4169
P4184
P4184
E4005
P4184
E4005
P4169
E4005
P4169
E4005
E4001
E4001
N/A
P4169
P4169
E4001
P4169
E4026-T
E4040-S
P
P4169
E4003
E4001
E4001
P4169
E4005
P4184
E4005
P4169
E4001
P4169
P4169
P4169
P4161
E4040-B
E4001
P4161
E4001
P4169
P4169
E4001
P4169
E4005-S
E4001
P4169
P4169
P4169
P4169
E4026-TB
E4005
E4005

LOWER MOUNT BUSH KIT

Original Kit

Bushes only
Replacement

Type

110-034-0721
SMP374
SMP488
SMP474
SMP345
SMP345
SMP363
SMP345
SMP5171
SMP474
110-034-0691
SMP474
SMP363
110-034-0651
*110-034-0651
N/A
SMP474
SMP476
110-034-0651
SMP476
110-110-089
110-110-0541
N/A
SMP476
110-034-0761
110-034-0651
110-034-0651
SMP474
110-034-0691
SMP343
110-034-0691
SMP474
110-034-0651
SMP474
SMP474
SMP474
SMP3341
110-004-0401
*110-034-0651
SMP3341
*SMP516
SMP474
SMP474
*SMP516
SMP474
SMP363
110-034-0651
SMP474
SMP474
SMP474
SMP476
110-110-089
110-034-0641
110-034-0641

N/A
OMEB42
110034078
OMEB13
OMEB42
OMEB42
OMEB36
OMEB42
OMEB36
OMEB13
OMEB40
OMEB13
OMEB36
OMEB14
OMEB14
N/A
OMEB13
OMEB13
OMEB14
N/A
110-110-089
N/A
N/A
SMP476
N/A
OMEB14
OMEB14
OMEB13
OMEB40
OMEB42
OMEB40
OMEB13
OMEB14
OMEB13
OMEB13
OMEB13
N/A
N/A
OMEB14
N/A
OMEB14
OMEB13
OMEB13
OMEB14
OMEB13
OMEB17
OMEB14
OMEB13
OMEB13
OMEB13
N/A
N/A
OMEB15
OMEB15

E4005
E4078-T
E4026-S
E4026-S
P4184
P4184
E4005
P4184
P4169
E4026-S
P4184
E4005
E4005
E4001
E4001
N/A
E4026-S
E4026-S
E4026-S
E4026-T
E4026-S
E4040-S
E-B
E4026-T
E4026-S
E4001
E4001
E4001
P4184
P4184
P4184
P4169
P4169
P4169
E4005
E4026-BS
E4026-S
E4026-S
E4001
E4026-S
E4001
E4026-S
E4026-S
E4001
E4026-T
E4026-S
E4005-S
E4005-S
E4005-S
E4026-S
E4026-TB
E4026-S
E4005
E4005

Original Kit

Bushes only
Replacement

110-034-0641
SMP487
110-034-0741
110-034-056
SMP345
SMP345
SMP363
SMP345
SMP474
N/A
SMP683
SMP343
SMP363
110-034-0651
110-034-0651
N/A
N/A
110-034-056
110-034-056
110-110-088
110-034-056
110-110-0541
N/A
110-110-088
110-034-056
110-034-0651
110-034-0651
110-034-0651
SMP683
SMP343
SMP683
SMP474
SMP474
SMP474
110-034-0641
110-034-181
110-A42-0711
110-034-181
110-034-0651
110-A42-0711
SMP516
N/A
N/A
SMP516
110-110-0781
110-034-056
110-034-0771
110-034-0771
110-034-0771
110-034-056
110-110-088
110-034-056
110-034-0641
110-034-0641

OMEB36
110034078
N/A
OMEB10
OMEB42
OMEB42
OMEB40
OMEB42
OMEB13
OMEB10
SMP683
OMEB36
OMEB40
OMEB14
OMEB14
N/A
OMEB10
OMEB10
OMEB10
110-110-088
OMEB10
N/A
N/A
110-110-088
OMEB10
OMEB14
OMEB14
OMEB14
SMP683
OMEB42
SMP683
OMEB13
OMEB13
OMEB13
OMEB36
110-034-181
OMEB10
110-034-181
OMEB14
OMEB10
OMEB14
OMEB10
OMEB10
OMEB14
110034078
OMEB10
OMEB17
OMEB17
OMEB17
OMEB10
N/A
OMEB10
OMEB15
OMEB15

Note:

Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers.
*Spacer Kit SMP511 also supplied.
1. When remaining stock of OME P/No. is exhausted no further product will be available.
See page 142 for legend of mount types

PAGE 140

cont.

SPECIFICATIONS - SHOCK ABSORBERS


NITROCHARGERS
UPPER MOUNT BUSH KIT

Part Number

Open Closed
Length Length
Nitrocharger
(mm) (mm)
N69
N701
N71E1
N72F
N73
N74E
N751
N75E1/N75F1
N76
N77
N78
N79
N801
N81
N831
N841
N85
N86/N86C1
N871
N881
N89
N901
N91S
N91SC1
N921
N931
N94
N95
N96
N97
N98
N1001
N101/N101C1
N102
N103S
N104/N104C1
N105
N1061/N106C1
N1071/N107C1
N1081/N108C1
N109S1
N1101
N111
N1121
N1131
N1141
N115
N116
N117
N118
N119S1
NC1201
N121S1
NC1221
N123S1

470
614
620
548
614
620
640
652
685
570
447
507
352
499
345
485
587
539
352
589
594
582
470
470
589
485
587
599
431
545
389
440
610
482
504
641
508
537
608
593
472
575
548
449
537
475
554
527
578
532
596
609
576
589
596

290
354
370
329
354
370
390
397
408
340
287
307
232
309
225
295
357
329
232
349
359
357
335
335
349
295
357
359
261
325
249
290
360
302
318
391
318
317
373
363
327
350
328
279
337
285
324
327
358
322
395
402
389
402
395

Type
E4005
P4184
P4184
P4169
P4184
P4184
E4005
E4005
E4005
E4032-S
E4005
E4005
P4169
E4001
P4169
P4169
E4005
P4169
P4169
P4169
E4001
E4005
PPP4169
P4169
E4005
E4001
P4169
E4001
P4169
P4203
P4204
P4169
PE4040-S
P4169
P4184
E4005-S
E4005-S
N/A
P4158
P4170
P4169
E4005
P4184
P4184
E4001
E4057-S
P4169
N/A
N/A
N/A
N/A
N/A

LOWER MOUNT BUSH KIT

Original Kit

Bushes only
Replacement

Type

110-034-0641
SMP4031
SMP4031
SMP474
SMP501
SMP501
110-034-0641
110-034-0641
110-034-0641
110-110-077
110-034-0641
110-034-0641
SMP474
110-034-0651
SMP474
SMP474
110-034-0641
SMP474
SMP474
SMP474
**110-034-0651
110-034-0641
SMP415
SMP415
SMP474
SMP474
110-034-0641
**110-034-0651
SMP474
110-034-0651
SMP474
SMP493
SMP493
SMP474
N/A
110-110-0541
SMP474
SMP501
110-110-066
110-110-066
Use OE Bushes
SMP641
SMP312
SMP474
110-034-0641
SMP345
SMP374
110-034-0651
110-110-0851
SMP474
SMP4831
110-039-0581
SMP4831
110-039-0581
SMP4831

OMEB36
OMEB42
OMEB42
OMEB13
OMEB42
OMEB42
OMEB15
OMEB15
OMEB15
N/A
OMEB15
OMEB36
OMEB13
OMEB14
OMEB13
OMEB13
OMEB15
OMEB13
OMEB13
OMEB13
OMEB14
OMEB15
N/A
N/A
OMEB13
OMEB13
OMEB15
OMEB14
OMEB13
OMEB14
OMEB13
N/A
SMP493
OMEB13
N/A
N/A
OMEB13
OMEB42
N/A
N/A
N/A
N/A
N/A
OMEB13
OMEB15
OMEB42
OMEB42
OMEB14
N/A
OMEB13
SMP4831
110039058 1
SMP4831
110039058 1
SMP4831

P4184
P4184
E4005
E4005
P4184
E4005
E4005
E4005
E4005
P4169
E4005
P4169
E4005-S
E4001
E4026-S
E4026-S
E4005
E4005
E4005-S
E4005
E4001
E4005
E4050-B
E4050-B
E4005
E4026-S
E4005
E4001
P4169
P4169
E4005-S
E4050-BS
E4005
E4050-BS
N/A
E4055-S
E4026-S
P4184
E4005-T
E4005-BS
E4055BS
E4040-BS
E4026-S
E4005
E4005
P4184
P4184
E4005-S
E4001-T
E4005
N/A
N/A
N/A
N/A
N/A

Original Kit

Bushes only
Replacement

SMP343
SMP4031
110-034-0641
110-034-0641
SMP501
110-034-0641
110-034-0641
110-034-0641
110-034-0641
SMP474
110-034-0641
SMP474
110-034-0721
110-034-0651
SMP381
N/A
110-034-0641
110-034-0641
110-034-0721
110-034-0641
110-034-0651
110-034-0641
110-110-122
110-110-122
110-034-0641
N/A
110-034-0641
110-034-0651
SMP474
SMP474
110-034-0721
110-110-090
110-034-069
110-110-090
N/A
110-110-0691
110-004-0741
SMP501
110-110-067
110-110-066
110-110-075
110-110-076
SMP487
110-034-0641
110-034-0641
SMP345
SMP374
110-034-0721
110-034-0201
110-034-080
N/A
N/A
N/A
N/A
N/A

OMEB42
OMEB42
OMEB36
OMEB36
OMEB42
OMEB36
OMEB15
OMEB15
OMEB15
OMEB13
OMEB15
OMEB13
OMEB17
OMEB14
OMEB10
OMEB10
OMEB15
OMEB15
OMEB17
OMEB36
OMEB14
OMEB15
110-110-122
110-110-122
OMEB36
OMEB10
OMEB15
OMEB14
OMEB13
OMEB13
OMEB17
110-110-090
OMEB40
N/A
N/A
N/A
OMEB10
OMEB42
N/A
110-110-066
N/A
N/A
N/A
OMEB15
OMEB15
OMEB42
OMEB42
OMEB17
OMEB10
OMEB11
N/A
N/A
N/A
N/A
N/A

Note:

Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers.
*Spacer Kit SMP511 also supplied.
** Spacer Kit SMP495 supplied
1. When remaining stock of OME P/No. is exhausted no further product will be available.
See page 142 for legend of mount types

PAGE 141

cont.

SPECIFICATIONS - SHOCK ABSORBERS


NITROCHARGERS
UPPER MOUNT BUSH KIT

Part Number

Open Closed
Length Length
Nitrocharger
(mm) (mm)
N124S1
N125S1
N126S1
N127S1
N128
N129S
NS1301
NS131
N132
N133
N1341
N135S1/N136S1
NC1381
N139S1
N140S
N141
N1421
N143S1
N144S1
NC1451
N1461
N147S
N148S
N149
N1501
N1511
N152
N1531
N1541
N1551
N156S1
N157S1
N158S1
N159S1
NC1601
NC1611
N1621
NC1631
N1641
N1651
N166S
N167S
N168
N169
N1701
N1711
N1721
N173S1
N174
N175
N176
N177
N178
N179
N180

576
411
411
601
358
472
333
333
573
443
559
602
609
543
543
577
577
590
590
651
655
476
476
504
388
308
576
528
562
568
365
365
405
405
601
572
348
617
527
657
543
543
600
600
348
532
532
481
597
603
535
485
600
790
690

389
289
289
385
238
327
201
201
359
287
349
393
400
405
405
353
353
408
408
439
379
362
362
313
242
202
345
312
336
332
530
530
610
610
403
386
222
386
317
397
411
411
370
370
322
316
316
301
341
363
319
299
364
456
406

Type
N/A
P
P
P
P4205
P
P
P
E4057-S
P4203
E4057-S
P
P
P
P
P4184
P4184
P
P
P
P
P
P
E4051-BS
P4205
P4205
P4158
P4205
E4001
P4205
P
P
P4205
P
P4184
E4005
P
P
E4005
E4005
P4205
P4205
P4205
P
P4180
E4005
E4055-S
E4055-S
E4005
E4005
E4005

LOWER MOUNT BUSH KIT

Original Kit

Bushes only
Replacement

Type

SMP4831
SMP363
SMP363
SMP3541
SMP474
Use OE Bushes
SMP4971
SMP4971
110-110-0851
SMP493
110-110-0851
SMP4831
SMP5461
SMP633/626
SMP633/626
SMP569
SMP569
SMP6251
SMP6411
SMP6401
SMP6401
110-110-0921
SMP474
SMP474
SMP641
SMP474
110-034-0651
SMP474
Nut only
Nut only
Nut only
Nut only
SMP5461
SMP6251 & 633
SMP474
SMP6251 & 633
SMP501
110-034-0641
SMP633 & 626
SMP633 & 626
SMP649
SMP649
SMP474
SMP474
SMP474
N/A
SMP343
110-034-0631
110-110-066
110-110-066
110-034-080
110-034-080
110-034-080

SMP4831
SMP363
SMP363
SMP3541
OMEB13
N/A
SMP4971
SMP4971
N/A
SMP493
N/A
SMP4831
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
OMEB13
OMEB13
N/A
OMEB13
OMEB14
OMEB13
OEM
OEM
OEM
OEM
SMP5461
SMP6251 & 633
OMEB13
SMP6251 & 633
OMEB42
OMEB15
SMP633 & 626
SMP633 & 626
SMP649
SMP649
OMEB13
OMEB13
OMEB13
N/A
SMP343
OMEB36
N/A
N/A
110-034-080
110-034-080
110-034-080

N/A
N/A
N/A
E-BS
E4026-T
E4055-BS
N/A
N/A
E4005-S
E4050-BS
E4005-S
N/A
E4050-S
E4050-S
E4005
E4005
E4055-BS
E4050-S
E4050-S
E4051-BS
E4026-S
E4026-S
E4051-BS
E4026-S
E4001
E4001
N/A
N/A
N/A
N/A
N/A
N/A
E4026-S
N/A
P4184
E4005
E4050-S
E4050-S
E4005
E4005
E4026-S
E4005
E4005
P4180
P4180
P4180
P4180
E4005-S
E4005-S
E4005-S

Original Kit

Bushes only
Replacement

N/A
N/A
N/A
N/A
SMP4891
110-110-075
N/A
N/A
110-110-0861
110-110-090
110-110-0861
N/A
110-110-122
110-110-122
SMP621
SMP621
110-110-0931
110-110-122
110-110-122
110-110-0921
110-034-056
110-034-056
110-110-076
110-034-0741
110-034-0651
110-034-0651
OEM
OEM
OEM
OEM
N/A
N/A
110-034-056
N/A
SMP501
110-034-0641
110-110-122
110-110-122
SMP649
SMP649
110-034-056
SMP6501
SMP6501
N/A
SMP343
SMP343
SMP343
SMP343
110-A42-1241
110-A42-1241
110-A42-1241

N/A
N/A
N/A
N/A
N/A
110-110-075
N/A
N/A
N/A
110-110-090
N/A
N/A
110-110-122
110-110-122
OMEB40
OMEB40
N/A
N/A
N/A
N/A
110-110-122
110-110-122
N/A
OMEB10
OMEB10
N/A
OMEB10
OMEB14
OMEB14
OEM
OEM
OEM
OEM
N/A
N/A
OMEB10
N/A
OMEB42
OMEB15
110-110-122
110-110-122
SMP649
SMP649
OMEB10
OMEB15
OMEB15
N/A
SMP343
SMP343
SMP343
SMP343
OMEB11
OMEB11
OMEB11

Note:

Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers.
See page 142 for legend of mount types
1. When remaining stock of OME P/No. is exhausted no further product will be available.

PAGE 142

cont.

SPECIFICATIONS - SHOCK ABSORBERS


NITROCHARGERS
UPPER MOUNT BUSH KIT

Part Number

Open Closed
Length Length
Nitrocharger
(mm) (mm)
N181
N182
N183S
N1841
N185
N186S
N1871
N188S
N1891
N190
N191
N192S
N193
N1941
N195
N196
N197
N198
N1991
N2001
N201S1
N2021
N203S1
N2041
N205
N206S1
N207S1
N208S
N209
N2101
N2111
N2121
N217S
N218S
N219S
N220
OME0071
OME013
OME014
OME015
OME0181
OME023
OME025
OME027
OME028
OME029
OME0301
OME031
OME0321
OME0331
OME034
OME035
OME036

537
608
390
379
567
426
360
600
658
589
589
661
360
560
576
652
615
440
610
543
577
472
576
507
602
602
608
610
610
576
618
610
610
516
6585
600
473
495
415
585
429
415
497
450
502
470
627
608
615
481
495
560

317
352
281
255
341
298
240
360
394
349
424
391
240
340
348
397
375
290
360
405
353
327
345
312
399
399
433
360
360
348
375
395
395
357
394
359
292
305
256
359
270
256
297
281
314
302
379
369
382
284
299
335

Type
P4184
P4205
PE4051-S
E4001
PP4205
E4005
E4057-S
P4205
PP4203
P4205
P4204
P4184
E4005
E-TBA
P4203
P4204
PP4184
P
P4158
P4213
PPP4214
P4204
P4204
P4184
E4053
PPP
E4057-S
E4004
E4001
E4001
P4175
E4003
E4001
P4175
P4175
P4169
E4028-S
E4028-S
P4175
P4175
PP4175
E4001
E

LOWER MOUNT BUSH KIT

Original Kit

Bushes only
Replacement

Type

SMP501
SMP474
SMP633
110-110-076
110-043-0651
N/A
SMP4751
110-034-0641
110-110-0851
SMP474
SMP6591
SMP493
SMP4751
SMP493
SMP374
110-034-0641
TBA
SMP493
SMP493
SMP633/626
SMP569
Use OE Bushes
SMP641
SMP6651
Nut only
Nut only
Use OE Bushes
SMP493
SMP493
SMP374
110-110-1051
N/A
N/A
Use OE Bushes
110-110-0851
110-034-0031
110-034-0651
110-034-0651
SMP3331
110-034-0031
110-034-0651
SMP3331
SMP3331
SMP474
110110009
110110009
SMP3331
SMP3331
SMP636
SMP3331
110-034-0651
6082183 1

OMEB42
OMEB13
N/A
N/A
OMEB14
N/A
OMEB13
OMEB15
N/A
OMEB13
SMP6591
OMEB13
OMEB42
OMEB15
TBA
SMP493
SMP493
SMP633/626
SMP569
N/A
N/A
N/A
N/A
N/A
Use OE Bushes
N/A
N/A
OMEB42
N/A
N/A
N/A
N/A
N/A
N/A
OMEB14
OMEB14
OMEB13
N/A
OMEB14
OMEB13
OMEB13
OMEB13
N/A
N/A
OMEB13
OMEB13
OMEB13
OMEB13
OMEB14
N/A

P4184
E4026-S
E4063-BS
E4051-S
E4063-S
E4055-BS
E4050
E4005BS
E4005-S
E4005-S
E4055-BS
E4040-BS
E4050
E4051-S
E-TBA
E-4005
E-TBA
E4050-BS
E4005
E4050-S
E4005
E4055-BS
E4051-BS
E4051-BS
N/A
N/A
E4066
E4005
E4005
E4026
E4026
N/A
N/A
OEM
E-4005-S
E4003
E4001
E4001
E4001
E4003
E4001
E4001
E4001
E4028-S
E4028-S
E4028-S
E4001
E4001
E4005-S
E4001
E4001
E

Note:

Original Kit

Bushes only
Replacement

SMP501
110-034-056
110-110-100
110-110-076
110-110-100
110-110-075
TBA
110-034-080
110-110-0861
110-034-0641
110-110-101
110-110-1021
TBA
110-110-1031
TBA
110-034-0641
TBA
110-110-090
110-034-069
110-110-060
SMP621
110-110-075
110-110-076
110-110-0921
N/A
N/A
N/A
110-034-0631
110-034-0631
110-034-181
110-034-181
N/A
N/A
OEM
110-110-0861
110-034-0031
110-034-0651
110-034-0651
110-034-0651
110-034-0031
110-034-0651
110-034-0651
110-034-0651
110110009
110110009
110110009
110-034-0651
110-034-0651
110-034-0721
110-034-0651
110-034-0651
6082183 1

OMEB42
N/A
N/A
N/A
N/A
N/A
TBA
OMEB15
N/A
TBA
TBA
OMEB15
TBA
110-110-090
OMEB40
110-110-060
OMEB40
110-110-075
N/A
N/A
N/A
N/A
110-110-110
OMEB40
OMEB40
110-034-181
110-034-181
N/A
N/A
N/A
N/A
N/A
OMEB14
OMEB14
OMEB14
N/A
OMEB14
OMEB14
OMEB14
N/A
N/A
N/A
OMEB14
OMEB14
OMEB17
OMEB14
OMEB14
N/A

Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers.
See page 142 for legend of mount types
1. When remaining stock of OME P/No. is exhausted no further product will be available.

PAGE 143

SPECIFICATIONS - SHOCK ABSORBERS


SHOCK ABSORBER MOUNT TYPES
Mount Type
Pin Part No.
P4161
P4169
P4170
P4175
P4184
P4203
P4204
P4205

Dimensions (mm)
Thread Length X Dia
62 x M10 x 1.5
53 x M10 x 1.25
73 x M10 x 1.5
58 x M10 x 1.5
71 x M12 x 1.25
85 x M14 x 1.5
77 x M14 x 1.5
54 x M10 x 1.25

OME Replacement
Part No.
OMEB13
OMEB13
OMEB13
OMEB13
OMEB42
Use original
Use original
OMEB13

Mount Type
Eye Part No.
E4001
E4003
E4005
E4026
E4028
E4032
E4040
E4050
E4055
E4057

Dimensions (mm)
OD x ID x L
37 x 25.3 x 24.3
42.6 x 37.7 x 19.5
44.2 x 31.7 x 30
37 x 27 x 25
38.4 x 25.1 x 23
46.7 x 36.6 x 33
46 x 37 x 30
45 x 39 x 35
50 x 40.2 x 34
42 x 32.5 x 29

Mounting Kit
Replacement Part No.
OMEB14
Not available
OMEB36 *OMEB40
OMEB10
Not available
Not available
Not available
Not available
Not available
Not available

T-CROSS PIN MOUNTING


S-BUSH WITH SLEEVE
B-BONDED BUSH
*Special Bush for N22F1, N29/N29C1 Lower Rear Mount
1. When remaining stock of OME P/No. is exhausted no further product will be available.

SPECIFICATIONS - TORSION BARS


TORSION BARS

Part Number
303001
303002
303003
303004
303005
303006
303007
303008
303009
303010
303011
303012
303013
303014

A
2.0
1160
1210
1065
1000
925
1365
890
1205
1277.5
1277.5
1307.5
1142
1024
1225

0.15
30.4
32.8
23.4
24.5
25.7
27.5
26.7
26.0
25.5
27.3
27.5
26.0
27.0
30.3

C
+0 -0.2
47.0
47.0
33.0
33.0
30.75
30.0
30.0
30.0
30.0
30.0
30.0
36.0
30.8
37.9

C
Spline No.
46
46
43
43
40
39
39
39
39
39
39
47
40
6 side hex

All dimensions in millimetres (mm)

PAGE 144

+0 -0.2
47.0
47.0
30.75
33.0
30.75
30.75
30.0
30.0
30.75
30.75
30.75
36.0
30.75
37.85

D
Spline No.
46
46
40
43
40
40
39
39
40
40
40
47
40
6 side hex

SPECIFICATIONS - STABILISERS
STEERING STABILISERS
Part Number
OMESD01
OMESD02
OMESD11
OMESD161
OMESD171
OMESD21
OMESD22
OMESD23
OMESD24
OMESD30
OMESD311
OMESD32
OMESD33
OMESD34
OMESD35
OMESD36
OMESD40
OMESD47
OMESD48

Upper Mount Type (mm)


Eye with Bush
Eye with Bush & Sleeve
Pin 60 x 9.5
Pin 60 x 9.5
Eye with Bush
Pin 60 x 9.5
Eye with Bush
Eye with Bush
Eye with Bush
Eye with Bush & Sleeve
Eye with Bush & Sleeve
Pin 60 x 9.5
Eye with Bush & Mounting Pin
Eye with Bush & Sleeve
Eye with Bush & Sleeve
Pin 60 x 9.5
Eye with Bush
Eye with Bush
Eye with Bush

Lower Mount Type (mm)


Eye with Bush
Eye with Bush & Sleeve
Pin 60 x 9.5
Pin 60 x 9.5
Eye with Bush
Eye with Bush
Eye with Bush
Eye with Bush
Eye with Bush
Eye with Bush & Sleeve
Eye with Bush & Sleeve
Eye with Bush & Sleeve
Eye with Bush
Eye with Bush
Eye with Bush & Sleeve
Pin 60 x 9.5
Eye with Bush & Sleeve
Eye with Bush
Eye with Bush & Sleeve

1. When remaining stock of OME P/No. is exhausted no further product will be available.

PAGE 145

Open Closed
Length Length
(mm)
(mm)
552
342
655
394
516
308
535
314
622
373
542
340
537
328
454
316
651
417
448
290
577
392
680
440
611
364
575
347
503
311
484
289
499
309
750
510
499
310

Mounting Kit No.


142995
No Kit
140276
140276
142387
140504
No Kit
142995
142995
No Kit
No Kit
500555
140953
No Kit
No Kit
140276
500498
142995
500498

No. of
Kits

OME Bush Kit

1
1
1
1
1
OMEB14
1
1

1
1

1
1
1
1

RECOMMENDED FITTING TIMES


COIL SPRINGS SYSTEMS
All Coil Spring Models (Except Land Rovers)
Fitment of 4 Shock Absorbers & 4 OME coil springs
Land Rover All Coil Spring Models
Fitment of all the above plus additional time to remove front shock absorber towers
Torsion Bar Front with Rear Coil Suspension
Fitment of 4 Shock Absorbers, 2 OME coil springs & front torsion bar adjustment
Coil Front with Rear Leaf Suspension
Fitment of 4 Shock Absorbers, 2 OME coil springs & 2 OME Leaf springs
Coil Over Front Strut with Rear Coil Suspension
Fitment of 2 Shock Absorbers, 2 OME struts & 4 OME coil springs
Coil over Front Strut with Leaf Rear Springs
Fitment of 2 Shock Absorbers, 2 Struts, 2 Coils & 2 Leaf Springs

2.0 hours
2.5 hours
2.0 hours
3.5 hours
3.0 hours
4.0 hours

LEAF SPRING SYSTEMS


All Leaf spring Models (Except HiLux)
Fitment of 4 Shock Absorbers, 4 OME Leaf Springs, and U bolts and spring bushes as required
Toyota HiLux All Leaf Spring Models
Fitment of all the above plus additional work required to strengthen front spring seat mount
Front Torsion Bar with Rear Leaf Spring Models
Fitment of 4 Shock Absorbers, 2 OME rear leaf springs, U bolts, spring bushes and
front torsion bar adjustment

5.0 hours
6.0 hours
3.0 hours

CARTRIDGE REPLACEMENT
Additional work required to install cartridge per strut

0.5 hours

TORSION BARS
Remove and replace a set of Bars (no removal complications)
Remove and replace a set of Bars (removal complications eg. OE splines corroded)

1.5 hours
2.5 hours

MISCELLANEOUS
Caster kits
Steering stabilisers
Greasable shackles (complete vehicle set)

2.0 hours
0.5 hours
2.0 hours

FRONT END WHEEL ALIGNMENT ADJUSTMENTS


Price
Live axle front end
Independent front end
The above fitting times are only a guide, and additional time may be involved due to vehicle modifications or
pre-existing accessories which can interfere with the fitment of the suspension.

PAGE 146

DISTRIBUTED BY
HEAD OFFICE: ARB CORPORATION LIMITED
Ph +61 9761 6622
Email: exports@arb.com.au

Fax +61 9761 6807


Web: www.arb.com.au

NORTH, CENTRAL AND SOUTH AMERICA: ARB USA (AIR LOCKER INC.)
Ph +425 264 1391
Email: sales@arbusa.com

Fax +425 264 1392


Web: www.arbusa.com

THAILAND: ARB THAILAND (ARB OFFROAD LIMITED)


Ph +66 (0)38 929 672-6
Email: sales.thailand@arb.com.au

Fax +66 (0)38 929 676


Web: www.arb.co.th

EUROPE: ARB EUROPE S.R.O


Ph +420 323 040 900
Email: sales@arbeurope.com

Fax +420 323 040 910


Web: www.arbeurope.com

Anda mungkin juga menyukai