0 penilaian0% menganggap dokumen ini bermanfaat (0 suara)
16 tayangan1 halaman
Plant 16 stabilizes mixed hydrocarbon condensate to meet RVP 9-12 PSI. It produces huge amount of fuel gas for boiler. Plant 16 also purifies fuel gas product before entering to fuel gas system.
Plant 16 stabilizes mixed hydrocarbon condensate to meet RVP 9-12 PSI. It produces huge amount of fuel gas for boiler. Plant 16 also purifies fuel gas product before entering to fuel gas system.
Plant 16 stabilizes mixed hydrocarbon condensate to meet RVP 9-12 PSI. It produces huge amount of fuel gas for boiler. Plant 16 also purifies fuel gas product before entering to fuel gas system.
a. To stabilize the mixed hydrocarbon condensate by removing the lighter component to meet a condensate product specification of RVP 9-12 PSI b. To produce a huge amount of fuel gas for boiler c. To purify fuel gas product before entering to fuel gas system d. To produce purify LPG propane and butane before storing 2. What are the important operation process variable in a condensate stabilizer unit a. Level of condensate surge drum and overhead column accumulator b. Flow of condensate feed to stabilizer column and wild condensate to surge drum c. Level and temperature at bottom column and overhead column pressure d. All answers are right 3. What should operator do when the condensate products RVP exceed the limit a. Increase the condensate feed rate to stabilizer column b. Increase the overhead column pressure c. Increase the amount of steam supply to reboiler d. Reduce the amount of steam supply to reboiler 4. Why the level of surge drum is prevented from over flooding a. To prevent liquid hydrocarbon condensate carry over to fuel gas system b. To prevent any liquid hydrocarbon losses because its high commercial grade c. To maintain liquid hydrocarbon supply for condensate stabilizer column d. To prevent level control valve open to release liquid to blowdown system 5. What will happen if the steam supply to reboiler is not enough a. Flooding may occur at condensate stabilizer column b. RVP of product will exceed the limit c. RVP of product will be lower d. Answer (a) and (b) are right