Features:
* * Rugged construction providing shock, dust and moisture resistance
* * Dual monitor position with automatic image orientation
* * Automatic arc calibration and fiber identification
* * User-selectable fiber clamping method * * Sheath clamp or fiber holders
* * Auto-start tube heater feature
* * Color LCD display with anti-reflective coating for excellent visibility in bright sunlight
* * Simultaneous battery charge and splicer operation
* * Long life battery ( up to 160 splice/ heat cycles per charge)
* * Detachable work table incorporated into the transit case
* * Data and video download software and splicer upgrade software included; software
upgrades through PC application via the internet
* * Green friendly RoHS & WEEE compliant
Includes:
BTR-08 Battery
DCC-14 Battery Charge Cord
CT30A Cleaver
ADC-13 AC Adapter
ACC-14 AC Cord
Spare Electrodes ( pair)
Sheath Clamp
USB Cable
Splicer Carrying Strap
Quick Reference Guide
Video Instruction M anual
JP-05 Splice Sleeve Cooling TrayRugged construction Providing shock, dust and moisture resistance
Dual monitor position with automatic image orientation
Automatic arc calibration and fiber identification
User-selectable fiber clamping method - sheath clamp or fiber holders
Auto-start tube heater feature
Color LCD display with anti-reflective coating for excellent visibility in bright sunlight
Simultaneous battery charge and splicer operation
Long life battery ( up to 160 splice / heat cycles per charge)
Detachable work table incorporated into the transit case
Data and video download software and splicer upgrade software included; software
upgrades through PC application via the internet
Green friendly - RoHS & WEEE compliant
Specifications
PARAMETER VALUE
Model FSM-60S Fusion Splicer
Applicable Fibers Single-mode ( ITU-T G.652) , M ultimode ( ITU-T G.651) , DS ( ITU-T G.653) , NZDS ( ITU-T
G.655) Cladding diameter of 80 m to150 m, Coating Diameter 100 m to 1, 000 m, Fiber Cleave
Length 8 to 16mm with coating diameter of 250 m, 16mm with coating diameter of 900 m, Typical
Average Splice Loss 0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS, Measured by cutback method relevant to ITU-T and IEC standards, Splicing Time Typical 9 seconds with standard single-mode
fiber, Method Arc Calibration Automatic, real-time and by using results of previous splice when in AUTO
mode, manual arc calibration function available, Splicing Modes 100 preset and user programmable modes,
Splice Loss Estimate Based upon dual camera core alignment of data, Storage of Splice Result Last 2000
results to be stored in the internal memory, Fiber Display X or Y, or both X and Y simultaneously. Front or
rear monitor display options with automated image orientation, Magnification 300X for single X or Y view, or
187X for X and Y view Viewing Method Dual cameras with 4.1 inch TFT color LCD monitor, Operating
Condition 0 to 5, 000m above sea level, 0 to 95% RH and -10 to 50 C respectively, Mechanical Proof Test
1.96 to 2.25N, Tube Heater Built-in tube heater with 30 heating modes; auto-start function, Tube Heating
Time Typical 30 seconds with FP-03 sleeve, 35 seconds with FP3 ( 40) , 35-55 seconds with Fujikura micro
sleeves, Protection Sleeve Length 60mm, 40mm, micro Splice / Heat Cycles with Battery Typical 160 cycles
with power save functions activated, Power Supply Auto voltage selection from 100 to 240V AC or 15V DC
with 10 to ADC-11, 13.2V DC with BTR-08 battery, Terminals USB 1.1 ( USB-B type) for PC communication.
This M-DIN ( 6-pin) for HJS-02/ 03 and SH-8 tube heater, Wind Protection Maximum wind velocity of 15m / s.
( 34 mph) , Dimensions 136W x 161D x 143H ( mm) / 5.3W x 6.3D x 5.6H ( inches) , Weight 2.3 kg ( 5.1 lbs)
with ADC-11 AC adapter; 2.7kg ( 5.9 lbs) with BTR-08 battery, Transit Case with Carrying Strap
Rp. 55.000.0000
15,900
18.225
Fluke odtr $14,996.92
Performance Specifications
Insertion Loss
0.2db
Return Loss
PC35db UPC50dbAPC60db
Cable Diameter
Operating
TemperatureC
-40~~+85
Product Description
* Crimping parts use new and unique structural design: no gluing, polishing and
consumables
Features
Application
TW3306A
Features
Efficiently identifies the traffic direction and frequency tone (270Hz, 1KHz, 2KHz) without any damage of the fibers.
Easy-to-replace adaptors (0.25, 0.9, 2.0, 3.0 to match various optical cables)
Machanical damp design of adapter heads to ensure the fiber without damage.
Applications
Maintenance in Telecom
Maintenance CATV
Test Lab of optical fibers
Other Fiber Optic Measurements
Specifications
Type
Detector Type
TW3306A
800-1700 nm
CW, 270Hz5%1kHz5%2kHz5%
Signal Direction
-50~+0dBm
Signal Frequency
Power Supply
Operating Temperature
-10+60
Storage Temperature
-25+70
Dimension (mm)
195X30X27
Weighgt (g)
235
MODEL
INCLUDES
TW3306A
TW3306A Optical Fiber Identifier, 4pcs adapter heads, Alkaline battery, Instruction
Manul, Contton Swabs and Soft Carrying case
Techwin FAST connectors make fiber terminations fast, easy and reliable. These fiber optic connectors offer
terminations without any hassles and require no epoxy, no polishing, no splicing, no heating and can achieve similar
excellent transmission parameters as standard polishing and splicing technology. We can greatly reduce the assembly and
set up time. The pre-polished connectors are mainly applied to FTTH cable in FTTH projects, directly in the end user site.
Performance Specifications
Insertion Loss
0.2db
Return Loss
PC35db UPC50dbAPC60db
Cable Diameter
Operating
TemperatureC
-40~~+85
Product Description
* Crimping parts use new and unique structural design: no gluing, polishing and
consumables
Features
Application
Description
NTool Name
o
.
QFunction
t
y
1Fiber Optic stripper(CFS-2), Assembled sleeve wrench, 2M Tape Measures, Utility Knife, Piano
1Peeling the coat
wire clamp, Cross Fiber reamer, Nipper, Scissors, Pliers, Acuate clamp, Mini Screwdriver, Innerof the fiber
hexagonal Wrench, Adjustable Spanner, Assembled Screwdriver, Alcohol Pump Bottle, Mark Pen,
Flashlight, diagonal cutting pliers, Voltage test pen, Loose skinning pliers, Carrying Case
1Fixing splice
closure/terminal
box
1Measuring the
length of the
fiber cable
1Accessorial tool
for peeling the
fiber cables
1Nipping the
strengthening
core of the fiber
cables
1Entwining the
fiber cables
1Snipping the
fiber of the fiber
1Snipping the
steel wire of the
fiber cables
1
0
1Accessorial tool
for the splicing
1
1
2Fixing the
screws
1
2
1
3
1Accessorial tool
for the splicing
1
4
1Loading and
uploading the
fiber optic splice
closure
1
5
1Cleaning the
fiber
1
6
1Marking the
fiber
1
7
1Lighting at night
1
8
1Accessorial tool
for peeling the
fiber cables
1
9
1Testing the
security of the
electrical source
and electrical
wire
2
0
1Peeling the
loose of the
fiber cables
2
1
1Containing the
above tools
TC-406
35401
Item Code:TC-406
Description
NO.
Name
Qty
Purpose
power meter Is a handheld optical power meter, newly released in 2007, which can be used for
absolute optical power measurements as well as for relative loss measurements in optical fibers. A 1.0mm photosensitive
area photodiode is used to significantly improve the stability and the reliability. It features ingenious appearance, a wide
range of power measurement, high accuracy, an user self-calibration function and a reference power level storage.
Features
night operation.
AA alkaline batteries can last more than 140 hours, AC adaptor also available
Applications
Maintenance in Telecom
Maintenance CATV
Test Lab of Optical Fibers
Other Fiber Optic Measurements
Specifications
MODEL
Wavelength(nm)
Detector Type
TW3211A
TW3211C
800~1700nm
InGaAs
Detector Size
1.0mm
-70~+10
-50~+30
Uncertainty
5%
Calibrated Wavelength(nm)
850,1300,1310,1490,1550,1625
Resolution(dB)
0.01
Optical Connector
Power Supply
Operating Temperatrue()
-10 ~ +60
Storage Temperatrue()
-25 ~ +70
Relative Humidity
0 to 95% (non-condensing)
Dimension(mm)
190X100X50
Weight(g)
370
MODEL
INCLUDES
TW3211 Optical Power Meter, 3pcs 1.5V batteries, AC Adaptor, Instruction Manual,
Cotton Tampon and Soft carrying case.
is a compact and an easy-to-use testing instrument for optical fiber networks, which can be used for absolute optical power