In the experiment we construct a circuit that deals
with OOK (on-off keying) transmitter circuit. On-off keying denotes the simplest form of amplitude-shift keying (ASK) modulation that represents digital data as the presence or absence of a carrier wave. OOK is most commonly used to transmit Morse code over radio frequencies, although in principle any digital encoding scheme may be used. OOK is also used in optical communication systems. The desire output that we must get in the OOK circuit must have a waveform if our pulse is in logic 0 (Low) the waveform must be straight (OFF state) but if the pulse is in logic 1 (High) the waveform must be a sinusoidal waveform (ON state).
As we test our circuit we achieved the desire output
of the circuit but have a distortion to lessen the distortion we changed the value of our resistor. As we change the value of our resistor and test again our circuit the waveform of our circuit has less distortion different from our first try that have a distortion. We can see in the waveform if we have a logic 1 in our pulse we get a sinusoidal waveform but if we have a logic 0 in our pulse we get a straight line.