The basic engineering service consist of core documentation of projects, including process flow diagrams,
heat & mass balances, piping and instrumentation diagrams (P&IDs), control & operational philosophy,
basic equipment sizing, equipment specifications, conceptual equipment layout, etc.
-Conceptual process studies (material balances, process flow-sheet)
-Preliminary Plot Plan
-Freezing the Master Layout of the Plant
-Definition and sizing of main equipment resulting in process specifications
-Preliminary Piping and Instrument Diagrams
-Utility consumption figures
-Schematic drawing of equipments on each floor
-Definition of control and safety devices;
-Analysis and sizing of safety valve
-Control valve hydraulics & process specifications
-Reconfirmation of the process and mechanical design of all equipment detailed specifications for vendor
supplied items such as pumps, compressor etc;
-Management of vendor drawings;
-Thermal rating and vibration analysis of heat exchangers;
-Management of vendor drawings;
-Thermal rating and vibration analysis of heat exchangers;
-Piping and instrument diagrams;
-Trip logic and safeguards;
-Cause and effect diagrams;
-Review of P&ID;
-Hazard and Operability Study (HAZOP);
-Line List;
-Valve List;
-Control valve data sheet;
-Relief valve data sheet;
-Panning and piping design;
-Detailed piping drawings, including isometrics and stress calculations;
-Bill of quantity (BOQ);
-Tender Bit evaluation and procurement assistance;
-Detailed drawings and documents related to instrumentation, electrical facilities and civil works;
-Schedule and cost control;
-Start-up procedures, operating and commissioning manuals.