0 penilaian0% menganggap dokumen ini bermanfaat (0 suara)
91 tayangan2 halaman
Open the fire box door to relieve pressure on the switch from the actuating rod. The door switch is located in left side of the stove above the burn drive motor.
Open the fire box door to relieve pressure on the switch from the actuating rod. The door switch is located in left side of the stove above the burn drive motor.
Hak Cipta:
Public Domain
Format Tersedia
Unduh sebagai PDF, TXT atau baca online dari Scribd
Open the fire box door to relieve pressure on the switch from the actuating rod. The door switch is located in left side of the stove above the burn drive motor.
Hak Cipta:
Public Domain
Format Tersedia
Unduh sebagai PDF, TXT atau baca online dari Scribd
• Unplug the stove. • Remove left side screw and panel. • Open the fire box door to relieve pressure on the switch from the actuating rod. See Figure 1. • The door switch is located in left side of the stove above the burn drive motor. See Figure 2. • Disconnect the wires from the switch. • Remove the two mounting screws and pull out the switch. See Figure 3. • Remove the switch from the bracket. • Screw the new switch to the bracket. • Attach the wires you removed from the old switch to the new switch. • Put the switch back in the stove. • Snug the bolts and reconnect the wires. • Push the rod in to hear the switch click. Adjust if necessary. See Figure 3. • Tighten the mounting screws on the switch if it operates correctly. • Close the fire box door. • Test the switch by opening the door. The switch should click just as the handle reaches the first detent. ADJUST IF NECESSARY. See Figure 3. • Check for proper operation. • Put the left side panel and screw back on.