*COMANDOS BASICOS.
Switch>enable
Switch#
Switch#configure terminal
Switch(config)#hostname Switch1 ( nombre que se le dio al switch )
Switch1(config)#line con 0
Switch1(config-line)#password redes (clave de consola)
Switch1(config-line)#login
Switch1(config-line)#line vty 0 15
Switch1(config-line)#password redes (clave telnet)
Switch1(config-line)#login
Switch1(config-line)#exit
Switch1(config)#enable password redes (clave enable)
Switch1(config)#enable secret class (clave secret enable)
Switch1(config)#interface VLAN 1
Switch1(config-if)#ip address 192.168.10.2 255.255.255.0 (ip del switch)
Switch1(config-if)#no shutdown
Switch1(config-if)#exit
Switch1(config)#ip default-gateway 192.168.10.1 (ip del router)
Switch1(config)#exit