Ada beberapa produsen processor untuk PC, seperti Intel, AMD, Cyrix, dan Winchip IDT. Kita
gunakan standar processor keluaran Intel Corp ,sbb
Generasi-Generasi CPU
Sejauh ini CPU Intel mempunyai unit-unit FPU terbaik dibandingkan AMD dan Cyrix.
Generasi 1
Prosesor 8088 dan 8086
Prosesor 8086 (1978) merupakan CPU 16 bit pertama Intel yang menggunakan bus sistem 16
bit. Tetapi perangkat keras 16 bit seperti motherboard saat itu terlalu mahal, dimana komputer
mikro 8 bit merupakan standar.
Pada 1979 Intel merancang ulang CPU sehingga sesuai dengan perangkat keras 8 bit yang ada.
PC pertama (1981) mempunyai CPU 8088 ini. 8088 merupakan CPU 16 bit, tetapi hanya secara
internal. Lebar bus data eksternal hanya 8 bit yang memberi kekompatibelan dengan perangkat
keras yang ada.
Sesungguhnya 8088 merupakan CPU 16/8 bit. Secara logika prosesor ini dapat diberi nama
8086SX. 8086 merupakan CPU pertama yang benar-benar 16 bit di keluarga ini.
Generasi 2
Prosesor 80286
286 (1982) juga merupakan prosesor 16 bit. Prosesor ini mempunyai kemajuan yang relatip
besar dibanding chip-chip generasi pertama. Frekuensi clock ditingkatkan, tetapi perbaikan yang
utama ialah optimasi penanganan perintah. 286 menghasilkan kerja lebih banyak tiap tik clock
daripada 8088/8086.
Pada kecepatan awal (6 MHz) berunjuk kerja empat kali lebih baik dari 8086 pada 4.77 MHz.
Belakangan diperkenalkan dengan kecepatan clock 8, 10, dan 12 MHz yang digunakan pada
IBM PC-AT (1984).
Pembaharuan yang lain ialah kemampuan untuk bekerja pada protected mode/mode
perlindungan – mode kerja baru dengan “24 bit virtual address mode“/”mode pengalamatan
virtual 24 bit”, yang menegaskan arah perpindahan dari DOS ke Windows dan multitasking.
Tetapi anda tidak dapat berganti dari protected kembali ke real mode/mode riil tanpa me-reboot
PC, dan sistem operasi yang menggunakan hal ini hanyalah OS/2 saat itu.
Prosesor ini dapat mengalamati memori hingga 4 GB dan mempunyai cara pengalamatan yang
lebih baik daripada 286. 386 bekerja pada kecepatan clock 16, 20, dan 33 MHz. Belakangan
Cyrix dan AMD membuat clones/tiruan-tiruan yang bekerja pada 40 MHz. 386 mengenalkan
mode kerja baru disamping mode real dan protected pada 286. Mode baru itu disebut virtual
8086 yang terbuka untuk multitasking karena CPU dapat membuat beberapa 8086 virtual di tiap
lokasi memorinya sendiri-sendiri. 80386 merupakan CPU pertama berunjuk kerja baik dengan
Windows versi-versi awal.
Prosesor 80386SX
Chip ini merupakan chip yang tidak lengkap yang sangat terkenal dari 386DX. Prosesor ini
hanya mempunyai bus data eksternal 16 bit berbeda dengan DX yang 32 bit. Juga, SX hanya
mempunyai jalur alamat 24. Oleh karena itu, prosesor ini hanya dapat mengalamati maksimum
RAM 16 MB. Prosesor ini bukan 386 yang sesungguhnya, tetapi motherboard yang lebih murah
membuatnya sangat terkenal
Generasi 4
Processor 80486 DX
80486 dikeluarkan 10 April 1989 dan bekerja dua kali lebih cepat dari pendahulunya. Hal ini dapat
terjadi karena penanganan perintah-perintah x86 yang lebih cepat, lebih-lebih pada mode RISC.
Pada saat yang sama kecepatan bus dinaikkan, tetapi 386DX dan 486DX merupakan chip 32 bit.
Sesuatu yang baru dalam 486 ialah menjadikan satu math co-processor/prosesor pembantu
matematis. Sebelumnya, math co-processor yang harus dipasang merupakan chip 387 yang terpisah.
486 juga mempunyai cache L1 8 KB.
Processor 80486 SX
Prosesor ini merupakan chip baru yang tidak lengkap. Math co-processor dihilangkan dibandingkan
486DX.
Cyrix dan Texas Instruments telah membuat serangkaian chip 486SLC. Chip-chip tersebut
menggunakan kumpulan perintah yang sama seperti 486DX, dan bekerja secara internal 32 bit,
seperti DX. Tetapi, secara eksternal bekerja hanya pada 16 bit (seperti 386SX). Oleh karena itu,
chip-chip tersebut hanya menangani RAM 16 MB. Lagi pula, hanya mempunyai cache internal 1
KB dan tidak ada mathematical co-processor. Sesungguhnya chip-chip tersebut hanya merupakan
perbaikan 286/386SX. Chip-chip tersebut bukan merupakan chip-chip clone. Chip-chip tersebut
mempunyai perbedaan yang mendasar dalam arsitekturnya dibandingkan dengan chip Intel.
IBM mempunyai chip 486 buatannya sendiri. Serangkaian chip tersebut diberi nama SLC2 dan
SLC3. Yang terakhir dikenal sebagai Blue Lightning. Chip-chip ini dapat dibandingkan dengan
486SX Intel, karena tidak mempunyai mathematical co-processor yang menjadi satu. Tetapi,
mempunyai cache internal 16 KB (bandingkan dengan Intel yang mempunyai 8 KB). Yang
mengurangi unjuk kerjanya ialah antarmuka bus dari chip 386. SLC2 bekerja pada 25/50 MHz
secara eksternal dan internal, sedangkan chip SLC3 bekerja pada 25/75 dan 33/100 MHz. IBM
membuat chip-chip ini untuk PC mereka sendiri dengan fasilitas mereka sendiri, melesensi
logiknya dari Intel.
CPU FPU
8086 8087
80286 80287
80386 80387
Generasi Lima
Pentium Classic (P54C)
Chip ini dikembangkan oleh Intel di Haifa, Israel dan dikeluarkan pada 22 Maret 1993.
Prosesor Pentium merupakan super scalar, yang berarti prosesor ini dapat menjalankan lebih
dari satu perintah tiap tik clock. Prosesor ini menangani dua perintah tiap tik; sebanding dengan
dua buah 486 dalam satu chip. Terdapat perubahan yang besar dalam bus sistem: lebarnya lipat
dua menjadi 64 bit dan kecepatannya meningkat menjadi 60 atau 66 MHz.
Sejak itu, Intel memproduksi dua macam Pentium: yang bekerja pada sistem bus 60 MHz (P90,
P120, P150, dan P180) dan sisanya, bekerja pada 66 MHz (P100, P133, P166, dan P200).
Generasi 6
Pentium Pro
Pengembangan Pentium Pro dimulai 1991, di Oregon. Diperkenalkan pada 1 November, 1995.
Pentium Pro merupakan prosesor RISC murni, dioptimasi untuk pemrosesan 32 bit pada Windows
NT atau OS/2. Fitur yang baru ialah bahwa cache L2 yang menjadi satu.
Chip raksasa. Di bawah ini terlihat chip empat persegi panjang dan Socket 8-nya. Unit CPU dan
cache L2 merupakan unit yang terpisah di dalam chip ini.
Pentium II
Pentium Pro “Klamath” merupakan nama sandi prosesor puncak Intel. Prosesor ini mengakhiri
seri Pentium Pro yang sebagian terdapat pengurangan dan sebagian terdapat perbaikan.
• CPU diletakkan bersama dengan 512 KB L2 di dalam sebuah modul SECC (Single Edge
Contact Cartridge).
• Terhubung dengan motherboard menggunakan penghubung/konektor slot one dan bus P6
GTL+.
• Perintah-perintah MMX.
• Perbaikan menjalankan program 16 bit (menyenangkan bagi pengguna Windows 3.11).
• Penggandaan dan perbaikan cache L1 (16 KB + 16 KB).
• Kecepatan internal meningkat: dari 233 MHz ke 300 MHz (versi berikutnya lebih tinggi).
• Cache L2 bekerja pada setengah kecepatan CPU.
Dengan rancangan yang baru, cache L2 mempunyai bus sendiri. Cache L2 bekerja pada
setengah kecepatan CPU, seperti 133 MHz atau 150 MHz. Jelas merupakan sebuah kemunduran
dari Pentium Pro, yang dapat bekerja pada 200 MHz antara CPU dan cache L2. Hal ini dijawah
dengan perbaikan cache L1. Di bawah ini terlihat perbandingan tersebut:
Pentium II telah tersedia dalam 233, 266, 300, 333, 350, 400, 450, dan 500 MHz (kecepatan yang
lebih tinggi segera muncul). Dengan chip set 82440BX dan i810 Pentium II mempunyai unjuk kerja
yang baik sekali.
Pentium II berbentuk kotak plastik persegi empat yang besar, yang berisi CPU dan cache. Juga
terdapat sebuah kontroler kecil (S82459AB) dan kipas pendingin dengan ukuran yang besar.
Pentium-II Celeron
Awal 1998 Intel mempunyai masa yang sulit dengan Pentium II yang agak mahal. Banyak
Maka Intel membuat merk CPU baru yang disebut Celeron. Prosesor ini sama dengan Pentium II
kecuali cache L2 yang telah dilepas. Prosesor ini dapat disebut Pentium II-SX. Pada 1998 Intel
mengganti Pentium MMX-nya dengan Celeron pertama. Kemudian rancangannya diperbaiki.
Cartridge Celeron sesuai dengan Slot 1 dan bekerja pada bus sistem 66 MHz. Clock internal bekerja
pada 266 atau 300 MHz.
Celeron
Bagian yang menarik ialah cartridge baru dengan 128 KB cache L2 di dalam CPU. Hal ini
memberikan unjuk kerja yang sangat baik, karena cache L2 bekerja pada kecepatan CPU penuh. Di
bawah ini terlihat Celeron 300A. Sebuah chip dalam kartu:
Celeron 300A
Socket 370 baru untuk Celeron. Prosesor 400 dan 366 MHz (1999) tersedia dalam plastic pin grid
array (PPGA). Socket PGA370 terlihat seperti Socket 7 tradisional. Mempunyai 370 pin:
Pentium-II Xeon
Pada 26 Juli 1998 Intel mengenalkan cartridge Pentium II baru yang diberi nama Xeon.
Ditujukan untuk server dan mungkin pemakai high-end.
Xeon merupakan Pentium II dengan cartridge baru yang sesuai konektor baru yang disebut Slot
Two. Modul ini dua kali lebih tinggi dari Pentium II, tetapi ada perubahan dan perbaikan
penting lain:
• Chip RAM cache L2 jenis baru: CSRAM (Custom SRAM), yang bekerja pada kecepatan
CPU penuh.
• Ukuran cache L2 yang berbeda: 512, 1024, atau 2048 KB RAM L2.
• Memori RAM hingga 8 GB dapat di-cache.
• Hingga empat atau delapan Xeon dalam satu server.
• Mendukung server yang di-cluster.
• Chip set baru 82440GX dan 82450NX.
Chip Xeon untuk server berunjuk kerja tinggi. Jenis unggulan pertama mempunyai 2 MB cache L2
Cache L2 Xeon bekerja pada kecepatan clock CPU penuh. Dapat diperkirakan, bahwa akan
mempunyai unjuk kerja yang sama seperti cache L1. Tetapi antarmuka dari L1 ke L2 bernilai
beberapa tik clock pada awal tiap perpindahan, sehingga ada beberapa kelambatan.Tetapi jika data
sudah dipindahkan, bekerja pada kecepatan clock penuh.
Maret 1999 Intel mengenalkan kumpulan MMX2 baru yang ditingkatkan untuk perintah grafis
(diantaranya 70 buah). Perintah ini disebut Katmai New Instructions (KNI)/Perintah Baru
Katmai atau SSE. Perintah ini ditujukan untuk meningkatkan unjuk kerja game 3D – seperti
teknologi 3DNow! AMD. Katmai memasukkan “double precision floating-point single
instruction multiple data“/”floating-point dengan ketelitian ganda satu perintah banyak data”
(atau DPFS SIMD untuk singkatnya) yang bekerja dalam delapan register 128 bit.
KNI diperkenalkan pada Pentium III 500 MHz baru. Prosesor ini sangat mirip dengan Pentium
II. Menggunakan Slot 1, dan hanya berbeda pada fitur baru seperti pemakaian Katmai dan SSE.
Prosesor ini dipasangkan pada motherboard dengan chip set BX dan Slot 1. Prosesor ini
mempunyai beberapa fitur:
Nomer pengenal PSN (Prosessor Serial Number), unik untuk tiap CPU, telah menyebabkan banyak
pembicaraan masalah keamanan. Nomer ini bernilai 96 bit yang diprogram secara elektronik ke
dalam tiap chip. Sesungguhnya ini berarti inisiatif yang sangat bijaksana, yang dapat membuat
perdagangan elektronik dan penyandian dalam internet lebih aman dan efektif.
Why six cores instead of eight? Intel's Pat Gelsinger answered that question back in March, when he mentioned that Intel wanted
to balance cores with L3 cache, and a "detailed set of workload characterizations" had led it to conclude that six cores with 16MB
is the "sweet spot." The launch press release says Xeon 7400 CPUs can improve performance by almost 50% in systems that make
heavy use of virtualization, databases, and other "data demanding workloads."
Despite its monstrous transistor count, Dunnington isn't so different from other Core 2 and Xeon CPUs. Intel used its 45nm Penryn
core as a building block, outfitting the new Xeon chip with three dual-core groups and filling up the rest with cache and interface
logic. Core clock speeds range up to 2.66GHz, while Intel stuck with 1066MHz on the front-side bus. Dunnington's most
surprising attribute may well be its power envelopes, since even the fastest of these six-core monsters only draws up to 130W. You
can get low-voltage, six-core derivatives with power envelopes as low as 65W, too. Check out the Xeon 7400 lineup below:
According to Intel, you can look forward to Xeon 7400-based systems from the likes of Dell, Egenera, Fujitsu, Fujitsu-Siemens,
Hitachi, HP, IBM, NEC, Sun, Supermicro, Unisys. Among those, IBM, NEC, and Unisys are cooking up servers that can scale to
16 sockets. Individual Xeon 7400 chips cost $856 to $2,729 a pop in 1,000-unit quantities.
Intel Corp. merilis chip quad core berkode nama Tukwila yang memiliki dua miliar
transistor di dalamnya. Chip yang memiliki kecepatan clock 2 GHz ini ditujukan untuk high-end server.
Prosesor yang dirancang dengan teknologi fabrikasi 65 nm ini akan dipamerkan di International Solid
State Circuits Conference (ISSCC) di San Francisco, Amerika Serikat, 3-8 Februari 2008.
Selain itu Intel juga meluncurkan platform PC dsktop kelas high-end yang dirancang dengan basis chip
Xeon. Platform ini memiliki dua soket, delapan core atau inti, empat slot kartu grafis, dan dual front-
side bus (FSB) berkecepatan 1600 MHz.
Prosesor tersebut menggunakan bandwidth kecepatan 25,6 GB/detik dan dinamai Skulltrail. Platform
ini meski lebih unggul dibanding platform pesaingnya AMD Spider, harganya lebih mahal dan hanya
dipasarkan dalam jumlah terbatas.
<!--[if gte vml 1]> <![endif]-->Pada tahun 1999, Pentium II Xeon digant dengan keluarnya
Pentium III Xeon. Versi awalnya (dengan kode Tanner) tidak memiliki perbedaan dengan versi
terdahulunya, hanya ada beberapa peningkatan di sisi cache controller. Versi berikutnya (dengan kode
Cascades) lebih kontroversial, karena dia memiliki bus 133 MHz tetapi hanya memiliki 256KB pada
L2 cache-nya. Dengan kata lain maka hal ini tidak ada bedanya antara Xeon dengan Pentium III for
desktop. Untuk mengatasi situasi ini maka Intel kemudian merilis versi kedua dari Cascades ini dengan
cache 2MB pada L2 cache-nya.
1. 2. Jenis Xeon
Intel Xeon terdiri dari dua jenis, yakni Intel Xeon DP dan Intel Xeon MP.
1.2.1. Intel Xeon DP
Intel Xeon DP adalah prosesor Intel Xeon yang dapat dikonfigurasikan agar dapat berjalan pada modus
dua prosesor (maksimum).
1.2.2. Intel Xeon MP
Prosessor terbaru ini juga dinilai teah mencapai tingkatan baru untuk peforma dan efisiensi energi.
Kebanyakan efisiensi energi yang dimiliki prosesor terbaru ini hadir dari kemampuan pabrikan 45nm
tercanggih milik Intel dan transistor penemuan baru yang menggunakan formula Hafnium-based high-k
metal gate. Semua versi prosesor Intel Xeon 5200 dan 5400 yang sebelumnya telah diluncurkan,
sekarang juga bebas halogen.
Prosesor-prosesor ini kompatibel dengan platform Intel dual prosesor yang sudah tersedia di pasar
sejak tahun 2006. Seri prosesor Quad-Core Intel(r) Xeon(r) 5400 terdiri dari prosesor baru X5492,
X5470 dan L5430, yang tercepat bekerja dengan clock speed 3,4GHz. Versi voltase rendahnya hanya
menggunakan daya 50 watt, atau hanya 12,5 watt per inti.
Prosesor Dual-Core Intel(r) Xeon(r) X5270 bekerja dengan daya hanya 80 watt, dengan frekuensi
3,5GHz. Organisasi yang menggunakan workstation, server baik high-performance, blade dan
mainstream diklaim Intel akan diuntungkan dengan peningkatan kemampuan ini .
Hasil benchmark terakhir dari prosesor-prosesor tersebut menunjukan performa yang lebih tinggi
dengan penggunaan daya yang sama pada tiap pengembangan processor Xeon(r). Dengan
SPECint*_rate2006, yang mengukur performa throughput integer dari server SuperMicro SuperServer
6025B-TR+ yang menggunakan processor X5470 berhasil memecahkan rekor dunia dengan nilai 150.
Server Fujitsu-Siemens PRIMERGY RX200 S4 yang menggunakan processor X5470 menjalankan
benchmark SPECjbb*2005 melanjutkan keunggulan Intel dalam skor Oracle JRockit(r) JVM dengan
nilai 316.728 BOPS.
“Intel terus mengembangkan upaya R&D dalam eco-innovation sambil terus memberikan kemampuan
dan performa yang tidak tertandingi,” kata Kirk Skaugen, vice president dan general manager Intel
Server Platforms Group dalam rilisnya.
Sejumlah vendor yang mendukung penggunaan processor baru ini termasuk Asus, Dell, Fujitsu,
Fujitsu-Siemens, Gigabyte, HP, IBM, Microstar, NEC, Quanta, Rackable Systems Inc., Sun
Microsystems, Supermicro, Tyan dan Verari Systems. Processor seri baru 5400 sudah tersedia
sekarang, sedangkan X5270 akan tersedia pada musim gugur ini.
As you know, the Xeon Foster is called "Willamette with SMP support", and the Xeon Prestonia is known as "Northwood
with SMP support". These CPUs are based on the same core. Besides, the pairs of "Foster - Willamette" and "Prestonia -
Northwood" are based on the same fabrication process and have the same L2 cache size. The processors have different
sockets, but if you look at the signal assignment diagram the pins of the Socket 603 processor will show that most of them
control either power supply or ground, i.e. they are not significant.
i860 chipset on the Supermicro P4DC6+. From left to right: Intel 82806AA PCI 64 Hub (Intel P64H), Intel 82860 Memory
Controller Hub (MCH), Intel 82801BA I/O Controller Hub (ICH2)
Although the i860 processor is meant for high-performance workstations it seems to be more suitable for servers. It is, in
fact, a i840 for SMP processors with the Pentium 4 core. The chipset uses the same Accelerated Hub Architecture, works
only with RDRAM and has a dual-channel memory controller (RIMM modules are installed in pairs). There is also 64-bit
PCI support via a separate Intel 82806AA PCI 64 Hub (Intel P64H).
The Intel i860 is meant for the Intel Xeon processors running at 100 MHz of the bus (it has quadruple bandwidth which is
equivalent to 400 MHz). The chipset consists of three main components:
• Intel 82860 Memory Controller Hub (MCH);
• support of AGP 4X, Ultra DMA/100/66/33, LPC (Low Pin Count) interface and 4 USB ports (v1.1);
One more difference is that the P4DCE and P4DC6 have VRM units designed as separate daughter cards. At the same time,
the Supermicro P4DC6+ which we used for testing the Intel Xeon has both VRMs onboard.
The layout of the P4DC6+ is very good. There are several jumpers to disable the integrated network and SCSI controllers or
to set a frequency of the 64-bit PCI segment (33/66 MHz). Graphics is not integrated (which proves once again that the
board is designed for workstations). Usage of 1 8-pin or 2 4-pin and 8-pin additional power supply connectors is a
distinguishing feature of the Supermicro line based on the i860. Besides, as I mentioned above, it's unusual to see the
AWARD BIOS on the Supermicro's board.
• DivX and MP3 encoding (DivX 4.12 and GOGO-no-coda 2.39c), archiving (WinAce 2.11 with a 4096 KBytes
library).
Besides, we included two CAD tests with design engineering applications SolidWorks 2001 and Solid Edge V10. We
enabled standard SPECapc tests for SolidWorks 2001 and SPECapc for Solid Edge V10.
Test results
As you remember, Xeon "Foster" hasn't been widely available on the market. It shipped just to major assemblers such as
Compaq and Dell. And now, when we have its test results in front of us, it is clear why Intel didn't hurry to promote the
Xeon Foster. Its rather low performance could have spoil the reputation of the new family, that is why its promotion was put
off until the Xeon Prestonia - a 0.13-micron core with a doubled cache (whose size matters much for the Pentium 4 core)
and with a high performance.
The results of the dual-processor systems are shown above those of the uni-processor ones and are of the same color.
Therefore, the second column for the Pentium 4 2.2 GHz is lacking.
The DivX is a very memory-intensive test, and the memory becomes a bottleneck here (all the P4 based processors have the
same results although they work at different frequencies - the maximum gap is 500 MHz). As a video card can't influence
conversion from one format to another, there is only dual-channel PC800 RDRAM or the hard drive which can limit the
operation. But the results of the Athlon MP and Pentium III-S deny the fault of the HDD. Besides, as you can see, we used
both uni- and dual-processor systems although the DivX codec doesn't support SMP. It is interesting that while SMP helps
dual systems based on classical cores - followers of the Pentium Pro architecture (Pentium III-S and Athlon MP), it puts
obstacles in the way of the Xeon (P4 core)!
The WinAce results are quite interesting (the data for the uni- and dual- processors systems are identical): it is the first time
when the Athlon MP loses to all. There is just one suggestion: if the WinAce uses SSE, it could failed to find its support in
the Athlon MP; it sometimes happens if a program is written badly. But it's just a suggestion.
Raster graphics
SPEC ViewPerf
Here we are showing the results of only uni-processor systems as the dual ones had the same or even lower scores.
DRV-07. This subtest depends on a core performance, memory efficiency and a speed of the 3D accelerator. The first place
is taken by the Northwood/Prestonia based system, and the difference between them is not great (it seems that the video
card is a bottleneck). The Xeon "Foster" 1.7 GHz falls behind (because of a small L2 cache). And the Athlon MP 1900+ lags
behind as the throughput of the PC2100 DDR SDRAM (2.1 GBps) is much lower than that of the dual-channel PC800
RDRAM (3.2 GBps). The Pentium III-S has lost because of the lowest core speed and the slowest memory.
Conclusion
The new processor Intel released for dual-processor systems is rather successful. Now there is one more highly efficient
processor from Intel like Pentium 4 (which supports SSE/SSE2, has a large L2 cache and doesn't dissipate too much heat),
and now also supports SMP. There is also a very powerful Intel i860 chipset which allows assembling modern and balanced
systems, and there are high-quality and powerful boards on it like Supermicro P4DC6+. When the Intel Xeon will start
shipping it will be much simpler to choose a platform for high-performance workstations.
But you should be aware of the fact that it makes no sense to build uni-processor systems on the Xeon. Performance of uni-
processor computers on the Xeon and Pentium 4 is the same, while the Xeon+i860 platform is much more expensive. At the
same time, a dual-processor system based on the Xeon is almost twice faster as compared with the Pentium 4 "Northwood"
of the same frequency.
The server Pentium III-S 1.26 GHz looks paler than the Xeon though in some applications this platform goes on a par with
the Xeon 1.8 GHz. The Athlon MP has a comparable performance level with the Xeon, and many mobo makers have
already announced support of the dual Athlons and are developing AMD-760MPX based boards but currently the market
can offer only Tyan's boards.
The Xeon with the Pentium 4 core looks rather promising. This year the company will release new versions working at the
FSB frequency of 533 MHz, and chipsets supporting DDR memory. Besides, in the first quarter of 2002 we will get a new
version of the Intel Xeon equipped with L3 cache and supporting 4-processor configurations.