– MP1xx
– MP11x
• Digital gateway
– Mediant 1000
– Mediant 2000
Default IP address
• Web Browser
• Bootp/TFTP Server
Web Browser
• Take AudioCodes in the Browser with
default ip.
• Assign new ip address,NAT ip,subnet
mask and default gateway.
• Save the configuration into flash memory
and reboot the Audiocodes.
• Take Audiocodes with new ip address
Bootp/Tftp server
• Connect an Audiocode direcly to
Bootp/Tftp server with a cross cable.
• Enter into the Bootp program.
• Enter into ‘Services’ and then click
‘Clients’
• Now you can see the client configuration
window
• Add client details such as MAC address,IP
address,subnet mask and default gateway
• Click apply,apply&reset then ok
• IP has been assigned to the Audio code
General Configurations
• SIP Parameter
• Coder
• End point phone table
• Authentication prefix
• DTMF and Dialing
• Voice setting and RTP setting
SIP Parameter
• Nextone (SIP) server ip address
Coder
• Sify and our carrier supports G729 codec
End point phone
• Assign phone number to the channel
Authentication prefix
DTMF and Dialing
Voice settings
RTP Settings
Configuration file
• Download/upload configuration (ini) file
from/into the Audio code.
Software Upgrade
• Upgarde the firrmware of the Audio code
• Click start software upgrade button and
load Cmp file then reset the Audio code.
Status & Diagnostics
• Call Details
• Channel status
• Message log
• System Information
Call Details
Channel Status
Message Log
System Information
Save Configuration
• Save the configuration to Flash memory
Reboot
• Finally reboot the Audio code.