User’s Guide
Includes setup, usage, and
troubleshooting information
for your iMac computer
K Apple Computer, Inc. Apple, the Apple logo, AirPort, Final Cut Pro, FireWire,
iCal, iDVD, iLife, iMac, iMovie, iPhoto, iPod, iTunes, Mac,
© 2006 Apple Computer, Inc. All rights reserved.
the Mac logo, Mac OS, and Macintosh are trademarks of
Under the copyright laws, this manual may not be Apple Computer, Inc., registered in the U.S. and other
copied, in whole or in part, without the written consent countries.
of Apple.
AirPort Express, Exposé, Finder, iSight, Safari, Spotlight,
The Apple logo is a trademark of Apple Computer, Inc., SuperDrive, and Tiger are trademarks of Apple
registered in the U.S. and other countries. Use of the Computer, Inc.
“keyboard” Apple logo (Option-Shift-K) for commercial
AppleCare and Apple Store are service marks of Apple
purposes without the prior written consent of Apple
Computer, Inc., registered in the U.S. and other
may constitute trademark infringement and unfair
countries.
competition in violation of federal and state laws.
.Mac is a service mark of Apple Computer, Inc.
Every effort has been made to ensure that the
information in this manual is accurate. Apple is not The Bluetooth word mark and logos are owned by
responsible for printing or clerical errors. the Bluetooth SIG, Inc. and any use of such marks by
Apple Computer, Inc. is under license.
Apple
1 Infinite Loop ENERGY STAR® is a U.S. registered trademark.
Cupertino, CA 95014-2084
Intel and Intel Core are trademarks or registered
408-996-1010
trademarks of Intel Corporation or its subsidiaries in the
www.apple.com
United States and other countries.
Other company and product names mentioned herein The product described in this manual incorporates
are trademarks of their respective companies. Mention copyright protection technology that is protected by
of third-party products is for informational purposes method claims of certain U.S. patents and other
only and constitutes neither an endorsement nor a intellectual property rights owned by Macrovision
recommendation. Apple assumes no responsibility with Corporation and other rights owners. Use of this
regard to the performance or use of these products. copyright protection technology must be authorized by
Macrovision Corporation and is intended for home and
Manufactured under license from Dolby Laboratories.
other limited viewing uses only unless otherwise
“Dolby,” “Pro Logic,” and the double-D symbol are
authorized by Macrovision Corporation. Reverse
trademarks of Dolby Laboratories. Confidential
engineering or disassembly is prohibited.
Unpublished Works, © 1992–1997 Dolby Laboratories,
Inc. All rights reserved. Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216,
4,819,098 and 4,907,093 licensed for limited viewing
PowerPC and the PowerPC logo are trademarks of
uses only.
International Business Machines Corporation, used
under license therefrom. Simultaneously published in the United States and
Canada.
Contents
5
34 Transferring Files to Another Computer
35 Using Applications
35 When an Application Doesn’t Respond
6 Contents
79 Chapter 5: Troubleshooting
80 Problems That Prevent You from Using Your iMac
82 Reinstalling the Software That Came with Your iMac
83 Other Problems
86 Locating Your Product Serial Number
87 Using Apple Hardware Test
89 Appendix A: Specifications
Contents 7
99 Appendix C: Connecting to the Internet
101 Gathering the Information You Need
103 Using Network Setup Assistant to Connect
104 Troubleshooting Your Connection
111 Index
8 Contents
Getting Started
1
1
Congratulations on purchasing your new iMac.
This chapter contains instructions for setting up
your computer.
Your iMac has been designed so that you can set it up quickly and start using it right
away. If you have never used an iMac or are new to Macintosh computers, read this
section for instructions on getting started.
Important: Read all of the installation instructions and safety information (see page 91)
before you plug your computer into a wall socket.
If you are an experienced user, you may already know enough to get started. Make
sure you look over the information in Chapter 2, “Getting to Know Your iMac,” to find
out about the new features of this iMac.
Before you set up your iMac, remove any protective film from the outside of your
computer.
9
What’s in the Box
Your iMac comes with an Apple keyboard, a Mighty Mouse, an Apple Remote, and an
AC power cord.
If you are joining or setting up a wireless network, see Appendix C, “Connecting to the
Internet,” on page 99.
d
d
d
Setup Assistant takes you through the process of transferring your information and
doesn’t affect the information on your other Mac. Setup Assistant can transfer:
 User accounts, including preferences and email
 Network settings
 Applications folder
 Files and folders on your main hard disk
 Files and folders on other hard disks
To wake your iMac, press any key on the keyboard or any button on the Apple Remote.
When the iMac wakes from sleep, your applications, documents, and computer settings
are exactly as you left them.
Warning: Shut down your iMac before moving it. Moving your iMac while the hard
disk is spinning can damage the hard disk, causing loss of data or the inability to start
up from the hard disk.
2
This chapter gives you some basic information you’ll
need to know about your iMac.
Read on for an overview of the different parts of your iMac and the features of
Mac OS X, including information about common tasks such as getting answers when
you need help, customizing the way your desktop looks, connecting to a printer, using
the Internet, and more.
The Apple website, at www.apple.com, links you to the latest Apple news, free
downloads, and online catalogs of software and hardware for your iMac.
You can also find the manuals for many Apple products and technical support for all of
Apple’s products on the Apple Service & Support website at www.apple.com/support.
19
Front View A
Slot-loading
optical disc drive
Built-in
speakers
Power indicator
light
Remote rest
- Volume controls
Built-in
infrared (IR)
receiver
Ambient light
sensor
Built-in
speakers
d USB ports
Apple
Keyboard
- Built-in microphone
Record sounds directly on your iMac or talk with friends live over broadband
using the included iChat AV application.
Built-in infrared (IR) receiver
Use your Apple Remote and the built-in IR receiver to work seamlessly with
your iMac.
Ambient light sensor
Detects a room’s ambient light and automatically adjusts the brightness of the
power indicator light, according to the light available, when the iMac is in sleep.
Built-in speakers
Listen to music, movies, games, and multimedia.
d Two USB (Universal Serial Bus) 1.1 ports on the Apple Keyboard
Connect low-power USB 1.1 devices, such as your mouse, to your iMac
computer’s keyboard. (There are also three high-speed USB 2.0 ports on the
back of your iMac.)
G Ethernet port
(10/100/1000Base-T)
f
optical
Headphone out/
out
optical audio
out port
Power port
Security slot
® Power button
Memory access
® Power button
Turn on your iMac or put it to sleep. Press and hold to reset during
troubleshooting.
Memory access
Your iMac comes with at least 512 megabytes (MB) of 667 MHz, PC2-5300 Double
Data Rate 2 (DDR2) SO-DIMMs. You can add more memory to your iMac, up to a
total of 2 GB. For more information about installing memory, see “Installing
Additional Memory” on page 70.
Mac OS X includes:
 Spotlight, a powerful search engine that automatically indexes all of your files
 Dashboard, an interface for putting handy “widgets” or mini-applications at your
fingertips
 Exposé, which tiles and neatly displays all your open applications
2 Choose Help > Mac Help (click the Help menu in the menu bar and choose Mac Help).
3 Click in the search field, type a question, and press Return on your keyboard.
As you get to know your iMac, explore the other system preferences. System
Preferences is your command center for most settings on your iMac. For more
information, choose Help > Mac Help and search for “System Preferences” or for the
name of a specific preference.
After you connect a printer, your computer usually detects it automatically and adds it
to the list of available printers. You may need to know the network name or address of
a printer connected to a network before you can print to it.
To set up a printer:
1 Open System Preferences and click the Print & Fax icon.
2 Click Printing and then click the Add (+) button to add a printer.
3 Select the printer you want to use, and then click Add.
4 Use the Add (+) button and the Remove (–) button to choose the printers that appear
in the printer list.
Monitoring Printing
After you send a document to a printer, you can monitor printing, including halting
your print job or putting it temporarily on hold. To monitor printing, click the printer
icon in the Dock to open the printer window. You can now see the print jobs in the
print queue and work with them.
For more information, open Mac Help and search for “printing.”
When you are connected to the Internet, Software Update checks Apple’s Internet
servers to see if any updates are available for your computer. Your iMac is set to
automatically check once a week but you can set it to check daily or monthly. You can
also check for updates manually.
To check for updated software:
1 Open System Preferences.
2 Click the Software Update icon and follow the directions on the screen.
Connecting to a Network
If you want to connect your iMac to an Ethernet network, a cable modem, a DSL
modem, or a wireless network, see “Connecting to an Ethernet Network” on page 54
and “Understanding AirPort Extreme Wireless Networking” on page 51 for information
about setting up an Ethernet or AirPort connection. You can also open Mac Help and
search for “Ethernet” or “AirPort.”
For more information about transferring files and documents, open Mac Help and
search for “transferring files” or for the type of connection you need.
3
This chapter provides instructions for using the
many built-in features and capabilities of your iMac,
so you can get the most out of your computer.
Here are some of the features you can explore with your new iMac:
 Click, roll, squeeze, and scroll with the Mighty Mouse
 Use the Apple Remote and Front Row to enjoy music, photos, and videos
from across the room
 Snap pictures with Photo Booth and the built-in iSight camera
 Hold a video chat with iChat AV and the built-in iSight camera
 Create a video with iMovie HD and the built-in iSight camera
 Use the built-in AirPort Extreme technology for wireless networking
 Connect printers and other peripherals to the USB 2.0 (d) ports
 Import video from a video camera or add external hard disks to the
FireWire (H) ports
 Mirror or extend your desktop to a TV, display, or projector using the mini-DVI
video (£) port
 Burn DVDs or CDs with the SuperDrive
37
To learn what you can do with your iMac, start with the information in this chapter.
Information can also be found in Mac Help and on the iMac Support website at
www.apple.com/support/imac/.
Open the Keyboard & Mouse preferences to set up Mighty Mouse as a one-button
mouse or configure it as a multibutton mouse. You’ll see pop-up button menus, plus
tracking, scrolling, and double-clicking controls. You can choose your primary and
secondary button designation, reassign which applications you want to open with
Mighty Mouse, and customize your scrolling capability.
Press the F15 key on your keyboard to increase the brightness of the display; press F14
to decrease brightness. Use Exposé to manage the windows on your screen. To see all
your open windows at once, press F9. To see all the windows open in the current
application, press F10. To hide the open windows and see the desktop, press F11.
In addition to using the Apple Remote to control Front Row (see page 42), you can use
your keyboard. The following keys correspond to the buttons on the Apple Remote:
To find keyboard shortcuts for other procedures and applications, choose Help > Mac
Help from the menu bar and search for “keyboard shortcuts.” For more information
about the Apple Remote, see “Using the Apple Remote and Front Row” next.
Magnet
Warning: The iMac contains a small magnet to rest your Apple Remote when it’s not
in use. To preserve the data on an external hard disk, memory card, iPod, or other
magnetic media, avoid bringing them close to the magnet.
The Apple Remote opens Front Row so you can play music from your iTunes music
library, watch photo slideshows and QuickTime movie trailers, play a DVD with DVD
Player, and more—all from across the room.
Your Apple Remote can:
 Open Front Row.
 Navigate through the Music, Photos, Videos, and DVD menus in Front Row.
 Navigate in iTunes, iPhoto, and DVD Player.
 Sleep or wake your iMac.
MENU
Warning: Install the battery correctly to avoid risk of an explosion. Align the battery’s
positive pole in the holder and use only the same type of battery as the original.
Camera
Microphone indicator light
iSight camera
Save your photo in your iPhoto library, email it to your friends, or save it as your iChat
buddy picture.
More information about Photo Booth is available in Mac Help. Choose Help >
Mac Help, then choose Library > Photo Booth Help.
Mode switch
3 Click the camera icon to the left of the mode switch and choose Built-in iSight from the
pop-up menu.
4 Click the “Record With iSight” button in the iMovie monitor to begin recording.
The video you see in the iMovie monitor is recorded as a clip in the iMovie Clips pane.
5 Click the “Record With iSight” button again to stop recording.
You can record video as long as your iMac has enough disk space to hold it.
More information about iMovie HD is available in Mac Help. Choose Help > Mac Help,
then choose Library > iMovie HD Help from the menu bar.
The green indicator light lets you know you are displaying video. Clicking the camera
button sends an invitation to your buddy to accept your video request and lets you
preview how you look on camera. When a buddy accepts your invitation, you can see
the buddy on your screen and you appear on your buddy’s screen.
You can also use Photo Booth to take a buddy picture. Select a picture you’ve taken in
Photo Booth and click the Buddy Picture icon to automatically update your iChat
buddy picture. For more information, see page 47.
More information about iChat AV is available in Mac Help. Choose Help > Mac Help,
then choose Library > iChat AV Help.
DSL or cable
modem
Connection to
the Internet
More information about AirPort is available in AirPort Help. Choose Help > Mac Help,
then choose Library > AirPort Help. You can also find information on the Apple AirPort
website at www.apple.com/airport.
Bluetooth wireless technology eliminates the need for many cables that traditionally
connect devices together. Bluetooth enabled devices can connect to each other
wirelessly at a distance of up to 10 meters (33 feet).
Ethernet port
(10/100/1000Base-T)
Connecting to a network gives you access to other computers on the network. You
may be able to store and retrieve information, use network printers, modems, and
email, or connect to the Internet. You can also share files between two computers or
set up a small network. Use a 2-pair shielded category 5 (shielded Cat 5) Ethernet cable
to connect to a 10Base-T, 100Base-T, or 1000Base-T Ethernet network. The Ethernet (G)
port on your iMac automatically detects other Ethernet devices.
f
optical
out
Headphone out/
optical audio out port
Use the Sound pane of System Preferences to select the audio input or output device
you want to use.
Mini-DVI port
When an external monitor or TV is connected, you can either have the same image
appear on both the iMac display and the external display (known as video mirroring) or
use the external display to extend the size of the Mac OS X desktop (known as
extended desktop mode).
Use the Apple Video Adapter to connect a TV, VCR, or other types of video devices with
composite or S-video ports to your iMac. When you connect a TV, the image appears
on both the iMac and the TV.
To connect a TV or VCR to your iMac:
1 Turn on the external device.
2 Connect the adapter to the composite video port or S-video port on the TV or VCR.
3 Connect the mini-DVI end of the adapter to the mini-DVI video (£) port on your iMac.
4 Use the Displays Preferences to adjust how the images are displayed on the device.
d d d
USB ports
You can connect USB 1.1 devices and high-speed USB 2.0 devices to the USB 2.0 (d)
ports on the back of your iMac. USB 1.1 devices won’t take advantage of the USB 2.0
higher transfer rate.
Likewise, you can connect USB 2.0 devices to the USB 1.1 (d) ports on your keyboard,
but they may operate at slower speeds.
USB hub
For information about USB devices available for your iMac, check the Macintosh
Products Guide at www.apple.com/guide.
H H
FireWire ports
Note: If you have data on floppy disks, use an external USB floppy disk drive to transfer
the data to your iMac. You can purchase an external USB floppy disk drive from an
Apple Authorized Reseller, an Apple Store retail location, or the online Apple Store at
www.apple.com/store.
If you can’t eject the disc, quit any applications that may be using the disc and try
again. If that doesn’t work, restart your iMac while holding down the primary button
on your Mighty Mouse.
If your iMac is connected to a TV so that you can watch DVD playback on the TV
screen, select NTSC (in the United States) or PAL (in Europe and other regions) in the
Displays pane of System Preferences.
You can easily connect your iMac to your stereo system. Use an optical audio cable
with a miniplug connector (available www.apple.com/store) to connect the
combination headphone out/optical audio out (f ) port on your iMac to the optical
audio input port on your stereo receiver.
You can also use iDVD to create your own customized DVD. For more information
about how to use iDVD, open iDVD and choose Help > iDVD Help.
Security slot
You can purchase a locking cable from an Apple Authorized Reseller, an Apple Store
retail location, or the online Apple Store at www.apple.com/store.
For more information about the software security features of your iMac, including user
passwords and file encryption, see Mac Help. Choose Help > Mac Help and search for
“security” or “multiple users.”
4
This chapter provides information and instructions
about installing memory in your iMac.
Your iMac comes with at least 512 megabytes (MB) of Double Data Rate 2 (DDR2)
Synchronous Dynamic Random Access (SDRAM) memory installed. You can add 512 MB
or 1 gigabyte (GB) memory modules to your iMac for a maximum of 2 GB of memory.
Memory modules must meet the following specifications:
 Small Outline Dual Inline Memory Module (SO-DIMM) format
 667 MHz, PC2-5300, DDR2 compliant (also referred to as DDR2 667)
 Unbuffered and unregistered.
69
Installing Additional Memory
Your iMac has two memory slots, a top slot and a bottom slot, that you access by
removing the door under the stand. You can add an additional 512 MB or 1 GB memory
module to the bottom slot and you can remove the memory module in the top slot to
replace the installed memory.
You can purchase additional Apple memory for your iMac at an Apple Authorized
Reseller, an Apple Store retail location, or the online Apple Store at www.apple.com/
store.
Warning: Always shut down your iMac and remove the power cord before installing
memory. Do not attempt to install memory in the computer while it is plugged in.
Raise
stand
Memory
access door
Phillips
screwdriver
Memory module
Memory module installed
6 Insert the memory module into the bottom slot with the notch facing left as shown in
the illustration.
7 Press the memory module firmly and evenly into the compartment. You’ll hear a slight
click when the memory is seated correctly.
Warning: Remember to replace the memory access door after you install memory.
Your iMac won’t function properly without the memory access door.
Raise
stand
Memory
access door
Phillips
screwdriver
9 Holding each side of your iMac, turn the computer right side up, and then reconnect
the cables and power cord.
10 Press the power (®) button on the back of your iMac to turn it on.
Memory module
partially ejected
Remove
memory module
Levers
Levers will
Memory modules partially close
Warning: Remember to replace the memory access door after you install memory.
Your iMac won’t function properly without the memory access door.
Raise
stand
Memory
access door
Phillips
screwdriver
7 Holding each side of your iMac, turn the computer right side up, and then reconnect
the cables and power cord.
8 Press the power (®) button on the back of your iMac to turn it on.
The total includes the amount of memory that originally came with your iMac plus the
new memory you installed. For a more detailed view of the amount of memory
installed in your iMac, open System Profiler by clicking More Info.
5
Occasionally you may have problems while working
with your iMac. This chapter gives you some
solutions to try when you have a problem.
This chapter provides solutions to problems that prevent you from working with your
iMac, such as a system freeze or an iMac that won’t start up. You can find more
troubleshooting information in Mac Help (see page 29) and on the Apple Service and
Support website at www.apple.com/support.
If you experience a problem with your iMac, there is usually a simple and quick
solution. If you encounter a problem, try to make a note of what you did before the
problem occurred. This will help you narrow down the possible causes of the problem
and then find the answers you need. Things to note include:
 The applications you were using when the problem occurred. Problems that occur
only with a specific application may indicate that the application isn’t compatible
with the version of the Mac OS installed on your iMac.
79
 Any new hardware (such as additional memory or a peripheral) that you connected
or installed.
Warning: Do not attempt to open your iMac except to install memory. If your iMac
needs service, consult the service and support information that came with your
computer for instructions about how to contact an Apple Authorized Service Provider
or Apple for service. Your iMac doesn’t have any user-serviceable parts, except the
memory.
80 Chapter 5 Troubleshooting
To get support and contact information for the software that came with your iMac, go
to www.apple.com/guide.
If the problem occurs frequently, you may need to reinstall your system software
(see “Reinstalling the Software That Came with Your iMac” on page 82).
If the iMac freezes during startup or you see a flashing question mark
 Wait a few seconds. If your iMac doesn’t start up after a brief wait, shut it down
by pressing and holding the power (®) button for about 5 seconds, until the iMac
shuts down. Then hold down the Option key and press the power (®) button again
to start up your iMac. When your iMac starts up, click the hard disk icon, then click
the right arrow.
 After the iMac starts up, open System Preferences and click Startup Disk. Select a
local Mac OS X System folder.
 If the problem occurs frequently, you may need to use Disk Utility (located on the
Mac OS X Install Disc 1 that came with your iMac) or reinstall your system software
(see “Reinstalling the Software That Came with Your iMac” on page 82).
If the iMac won’t turn on or start up
 Make sure the power cord is plugged into the iMac and into a functioning
power outlet.
 If that doesn’t work, press the power (®) button and immediately hold down the
Command (x), Option, P, and R keys until you hear the startup sound a second time.
 If you recently installed additional memory, make sure that it is correctly installed and
that it is compatible with your iMac. Check whether removing the memory you
installed allows the iMac to start up (see page 70).
Chapter 5 Troubleshooting 81
 If that doesn’t work, unplug the power cord and wait at least 30 seconds. Plug the
power cord back in and press the power (®) button again to start up your iMac.
 If you are still unable to start up your iMac, see the service and support information
that came with your iMac for information about contacting Apple for service.
Important: Apple recommends that you back up the data on your hard disk before
restoring software. Apple isn’t responsible for any lost data.
Installing Mac OS X
To install Mac OS X:
1 Back up your important files.
2 Insert the Mac OS X Install Disc 1 that came with your iMac.
3 Double-click “Install Mac OS X and Bundled Software.”
4 Follow the onscreen instructions.
5 After selecting the destination disk for installation, continue following the onscreen
instructions. Your iMac may restart and ask you to insert the next Mac OS X install disc.
Important: The “Erase and Install” option erases the iMac hard disk so you should back
up your important files before installing Mac OS X and other applications.
82 Chapter 5 Troubleshooting
Installing Applications
To install only the applications that came with your iMac, follow the steps below. Your
iMac must first have Mac OS X installed.
To install applications:
1 Back up your important files.
2 Insert the Mac OS X Install Disc 1 that came with your iMac.
3 Double-click “Install Bundled Software only.”
4 Follow the onscreen instructions.
5 After selecting the destination disk for installation, continue following the onscreen
instructions.
Note: To install iCal, iChat, iSync, iTunes, and Safari, follow the “Installing Mac OS X”
instructions above.
Other Problems
If you have trouble opening an application
Determine the type of application you have by selecting the application’s icon and
choosing Get Info from the File menu.
 You can use Universal, Intel, or PowerPC applications with our computer.
Chapter 5 Troubleshooting 83
 Classic (or Mac OS 9) applications are not compatible with your computer and do
not open.
If you have a problem with an application
 For a problem with software from a manufacturer other than Apple, contact the
manufacturer. Software manufacturers often provide updates to their software on
their websites.
You can check for and install the latest Apple software using the Software Update
pane of System Preferences. Your iMac is set to automatically check once a week but
you can set it to check daily or monthly. You can also check for updates manually. For
more information, choose Help > Mac Help and search for “software update.”
If you have trouble using AirPort wireless communication
 Make sure you have properly configured the software according to the instructions
that came with your AirPort Extreme Base Station or AirPort Express.
 Make sure the computer or network you are trying to connect to is running and has a
wireless access point.
 Make sure you are within antenna range of the other computer or the network’s
access point. Nearby electronic devices or metal structures can interfere with wireless
communication and reduce this range. Repositioning or rotating the iMac may
improve reception.
 Check the AirPort signal level. There are up to four bars in the AirPort status icon in
the menu bar.
 You may experience network performance problems if a microwave oven, cordless
telephone, or other source of interference is used near your base station. To minimize
interference, move the base station away from the device.
84 Chapter 5 Troubleshooting
 For more information about using and troubleshooting AirPort, choose Help >
Mac Help, then choose Library > AirPort Help.
If you have a problem with your Internet connection
 Make sure your network cable is connected and functioning properly.
 If you are using a dial-up Internet connection, make sure that your telephone cord is
plugged into the port on the external modem (available separately) and not the
Ethernet (G) port.
 See “Connecting to the Internet” on page 99 for information on setting up your iMac
to connect to the Internet. There you will find how to locate your Internet settings
and the contact information for your Internet service provider (if you used Setup
Assistant to get your Internet account).
 See “Troubleshooting Your Connection” on page 104 for more information if you have
a problem with your Internet connection.
If you have trouble ejecting a disc
 Quit any applications that may be using the disc, and then and press the Media
Eject (C) key on your keyboard.
 If that doesn’t work, open a Finder window and click the eject icon next to the
disc icon in the sidebar, or drag the disc’s icon from the desktop to the Trash.
 If that doesn’t work, log out of your user account by choosing Apple menu >
Log Out “User” (your account name appears in the menu), and then press the
Media Eject (C) key on your keyboard.
 If that doesn’t work, restart the iMac while holding down the mouse button.
Chapter 5 Troubleshooting 85
If you have a problem using your iMac or working with the Mac OS
 If the answers to your questions are not in this manual, look in Mac Help for
instructions and troubleshooting information. In the Finder, choose Help > Mac Help.
 Check the Apple Support website at www.apple.com/support for the latest
troubleshooting information and software updates.
If your date and time settings get lost repeatedly
You may need to have the internal backup battery replaced. The battery in your iMac
isn’t user-replaceable. Contact an Apple Authorized Service Provider or an Apple Store
retail location for more information.
86 Chapter 5 Troubleshooting
Using Apple Hardware Test
You can use Apple Hardware Test to help determine if there is a problem with your
iMac computer’s hardware.
To use Apple Hardware Test:
1 Disconnect all external devices from your iMac except the keyboard and mouse.
If you have an Ethernet cable connected, disconnect it.
2 Insert the Mac OS X Install Disc 1 that came with your iMac.
3 Restart your iMac and hold down the “D” key as it starts up.
4 Select the language appropriate for your location when the Apple Hardware Test
language chooser screen appears.
5 Press the Return key or click the right arrow button.
6 When the Apple Hardware Test main screen appears (after about 45 seconds), follow
the onscreen instructions.
7 If Apple Hardware Test detects a problem, it displays an error code. Make a note of the
error code before pursuing support options. If Apple Hardware Test doesn’t detect a
hardware failure, the problem may be software-related.
For more information about Apple Hardware Test, see the Apple Hardware Test Read
Me file on the Mac OS X Install Disc 1.
Chapter 5 Troubleshooting 87
Specifications
A
Appendix
A
89
Click the triangles in the window
to show and hide information in
the different categories.
90 Appendix A Specifications
Safety, Use, and Care
B
Appendix
B
Information
91
 Disconnect the power plug (by pulling the plug, not the cord) and disconnect the
phone cord if any of the following conditions exists:
 You want to add memory
 The power cord or plug becomes frayed or otherwise damaged
 You spill something into the case
 Your iMac is exposed to rain or excess moisture
 Your iMac has been dropped or the case has been damaged
 You suspect that your iMac needs service or repair
 You want to clean the case (use only the recommended procedure described later)
 Your iMac contains magnets. Do not place magnetically sensitive material or devices
within 1 inch (25 mm) of the computer.
Important: The only way to turn off power completely is to disconnect the power cord.
Make sure at least one end of the power cord is within easy reach so that you can
unplug the iMac when you need to.
Warning: Your AC cord came equipped with a three-wire grounding plug (a plug that
has a third grounding pin). This plug will fit only a grounded AC outlet. If you are
unable to insert the plug into an outlet because the outlet isn’t grounded, contact a
licensed electrician to replace the outlet with a properly grounded outlet. Do not
defeat the purpose of the grounding plug.
Warning: Never push objects of any kind into this product through the ventilation
openings in the case. Doing so may be dangerous and result in fire or a dangerous
electric shock.
If you open your iMac or install items other than the memory, you risk damaging your
equipment, and such damage isn’t covered by the limited warranty on your iMac.
Do not attempt to disassemble the cabinet containing the laser. The laser beam used in
this product is harmful to the eyes. The use of optical instruments, such as magnifying
lenses, with this product increases the potential hazard to your eyes. For your safety,
have this equipment serviced only by an Apple-authorized service provider.
Because of the optical disc drive in your computer, your computer is a Class 1
laser product. The Class 1 label, located in a user-accessible area, indicates that the
drive meets minimum safety requirements. A service warning label is located in a
service-accessible area. The labels on your product may differ slightly from the ones
shown here.
Understanding Ergonomics
Here are some tips for setting up a healthy work environment.
Chair
An adjustable chair that provides firm, comfortable support is best. Adjust the height
of the chair so that your thighs are horizontal and your feet are flat on the floor. The
back of the chair should support your lower back (lumbar region). Follow the
manufacturer’s instructions for adjusting the backrest to fit your body properly.
Lower back
Clearance under
supported
work surface
Use a light touch when typing and keep your hands and fingers relaxed. Avoid rolling
your thumbs under your palms.
Change hand positions often to avoid fatigue. Some computer users may develop
discomfort in their hands, wrists, or arms after intensive work without breaks. If you
begin to develop chronic pain or discomfort in your hands, wrists, or arms, consult a
qualified health specialist.
More Information About Ergonomics
Go to www.apple.com/about/ergonomics.
Appendix
C
99
 Dial-up connection—An external modem is plugged into a USB (d) port on your
computer and a telephone cable connects the modem to a telephone wall jack.
Before you can connect to the Internet, you need to:
1 Set up an account with an ISP. You can find an ISP in your telephone directory. Look
under “Internet access,” “Internet service,” or “online.”
2 Gather the connection information you need from your ISP or network administrator.
See the next section, “Gathering the Information You Need” on page 101 to find out
what information you need for each type of connection. You can write the information
directly on the next few pages for reference, and then enter it in Setup Assistant.
If another computer in the same location is already connected to the Internet, you may
be able to use its settings.
To find the settings on a Mac OS X computer:
 Open the Network pane of System Preferences.
 Choose your connection method from the Show pop-up menu.
 Copy the information for your configuration.
To find the settings on a Windows PC:
The connection information on a Windows computer resides in two places.
 To find the IP address and subnet mask, open the “Network and Internet
Connections” control panel.
 To find user account information, open the User Accounts control panel.
If you already started your computer and did not use Setup Assistant to configure your
Internet connection, see “Using Network Setup Assistant to Connect” on page 103.
If you’re unsure which method to use, “Using DHCP” may be a good choice, because
the network supplies most of the required information for you automatically.
If you selected “Manually” or “Using DHCP with a manual address,” gather the
following:
 IP address
 Subnet mask*
 Router address*
*If you selected “Using DHCP with a manual address,” you don’t need a subnet mask or
router address.
If you selected “Using DHCP,” ask your ISP if you need the following optional
information:
 DHCP client ID
 DNS servers
The information below may be optional. Ask your ISP or system administrator if you
need it.
 DNS servers
 Domain name
 Proxy server
If Network Diagnostics can’t resolve the problem, there may be a problem with the
Internet service provider (ISP) you are trying to connect to, with an external device you
are using to connect to your ISP, or with the server you are trying to access. You can
also try the following steps.
If only one IP address is used, then you must have a router capable of sharing the
connection, also known as network address translation (NAT) or “IP masquerading.”
For setup information, check the documentation provided with your router or ask the
person who set up your network. You can use an AirPort Extreme Base Station to share
one IP address among multiple computers. For information about using the AirPort
Extreme Base Station, check Mac Help or visit the Apple AirPort website at
www.apple.com/airport.
If you cannot resolve the issue using these steps, you should contact your ISP or
network administrator.
107
Bluetooth Information Europe–EU Declaration of Conformity
FCC Bluetooth Wireless Compliance The equipment complies with the RF Exposure
The antenna used with this transmitter must not be Requirement 1999/519/EC, Council Recommendation of
colocated or operated in conjunction with any other 12 July 1999 on the limitation of exposure of the general
antenna or transmitter subject to the conditions of the public to electromagnetic fields (0 Hz to 300 GHz. This
FCC Grant. equipment meets the following conformance standards:
EN300 328, EN301 893, EN301 489-17, EN60950
Bluetooth Industry Canada Statement
This Class B device meets all requirements of the Hereby, Apple Computer, Inc., declares that this 802.11a/
Canadian interference-causing equipment regulations. b/g Mini-PCIe card is in compliance with the essential
requirements and other relevant provisions of Directive
Cet appareil numérique de la Class B respecte toutes les
1999/5/EC.
exigences du Règlement sur le matériel brouilleur
du Canada. Korea Mouse Statement
Bluetooth Europe–EU Declaration of Conformity
This wireless device complies with the specifications EN
300 328, EN 301-489, and EN 60950 following the
Mighty Mouse
provisions of the R&TTE Directive.
Industry Canada Statement
Complies with the Canadian ICES-003 Class B
specifications. Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
Exposure to Radio Frequency Energy
The radiated output power of the AirPort Extreme Card
in this device is far below the FCC radio frequency Mighty Mouse
exposure limits for uncontrolled equipment. This device
should be operated with a minimum distance of at least
20 cm between the AirPort Extreme Card antennas and
a person’s body and must not be co-located or operated
with any other antenna or transmitter.
Korea Statements
European Community
Complies with European Directives 72/23/EEC and 89/
336/EEC, and 99/5/EC.
108
Singapore Wireless Certification VCCI Class B Statement
109
Disposal and Recycling Information Battery Disposal
The backlight lamp in this product contains mercury. Your iMac has an internal backup battery that preserves
Dispose of it according to your local environmental laws settings, such as the date and time, when the computer
and guidelines. is off. Do not attempt to change the battery. Only an
Apple-certified technician can change the battery.
For information about Apple’s recycling program, go to
www.apple.com/environment/summary.html. When this product has reached the end of its useful life,
please dispose of it according to your local
European Union
environmental laws and guidelines.
Nederlands: Gebruikte batterijen kunnen worden
ingeleverd bij de chemokar of in een speciale
The symbol above means that according to local laws batterijcontainer voor klein chemisch afval (kca) worden
and regulations your product should be disposed of gedeponeerd.
separately from household waste. When this product
reaches its end of life, take it to a collection point
designated by local authorities. Some collection points
Deutschland: Dieses Gerät enthält Batterien. Bitte nicht
accept products for free. The separate collection and
in den Hausmüll werfen. Entsorgen Sie dieses Gerätes
recycling of your product at the time of disposal will
am Ende seines Lebenszyklus entsprechend der
help conserve natural resources and ensure that it is
maßgeblichen gesetzlichen Regelungen.
recycled in a manner that protects human health and
the environment. Taiwan:
110
Index
Index
A built-in video camera. See iSight to a TV, projector, or VCR 57
AirPort Extreme burning a CD 66 USB devices 59
overview 51 burning a DVD 67
D
problems using 84
C Dashboard 28
setting up a connection 102
cable modem date and time settings lost 86
ambient light sensor 23
setting up 102 dial-up
analog audio 56
camera indicator light 23 using 100
Apple Remote
cameras digital video camera 61
buttons 44
digital 59 DIMMs. See memory
keyboard equivalents 41
DV 61 display
replacing the battery 46
iSight 23, 47 cleaning 98
using 43
carrying your iMac 98 Dock 29
applications
CD downloading software 32
freezing 35
burning (recording) 66 DSL
using 35
changing modem 102
assistants
System Preferences 30 DVD
Migration Assistant 16
the desktop 30 burning (recording) 67
Network Setup Assistant 99
cleaning your computer 98 playing videos 65
Setup Assistant 15, 33, 85
computer disposal 110 DVD Player 65
audio line-in port 25
connecting
B FireWire devices 61 E
iPod 59 ejecting a disc 85
built-in microphone 23
to a display or projector 57 environment 98
built-in speakers 21, 23
to a network 54 ergonomics 95
111
Ethernet buddy icon 50 J
cable 54 buddy picture 50 joysticks 59
port 25 installing 83
using 54 using built-in iSight 49 K
Exposé 28 video conferencing 49 keyboard
external hard disks 61 iDVD 67 controls 41
iMac ergonomics 97
F back view 24, 26 setup 13
FireWire front view 20, 22 USB ports 59
connecting devices 61 infrared
ports 25 receiver 23, 42 L
floppy disk drives 59 turning off reception 45 LAN
Force Quit 35 inserting a CD or DVD 64 connection 102
freezing up 80 installing
Front Row applications 83
M
application 42 Mac Help 29
Mac OS X 82
opening 43 Mac OS X
Internet
frozen application 35 installing 82
connecting to 16, 99
learning about 28
problems connecting 85,
G manually using DHCP router
104
game pads 59 option 102
Internet service provider 100
general safety 91 memory
IR. See infrared
access door 27
H iSight
how much is installed 77
hard disks 61 indicator light 23
installing 70
headphone out/optical audio turning off 50
Mighty Mouse
out port 55, 65 using 47
configuring 39
headphones, speakers 25 video camera 23
ergonomics 97
video conferencing 49
multi-button 21
I ISP 100
programming 39
iChat iTunes 66
setting up 13
application 23
using 38
112 Index
Migration Assistant 16 startup 81 setting up 102
Mini-DVI port 25 computer won’t a printer 31
modem respond 80 your computer 11
cable 54, 99 computer won’t start up 81 shutting down
DSL 54, 99 connecting to Internet 104 before installing
mouse. See Mighty Mouse date and time settings memory 70
lost 86 the computer 18
N ejecting a disc 85 sleep 18
network connections 106 Internet connection 85 software
Network Setup Assistant 99 with an application 84 updating 32
Software Update
O R preferences 32
operating system 28 RAM. See memory specifications 89
optical disc drive 21, 63 recording discs 66, 67 Spotlight 28
remote stopping
P
delete pairing 45 an application 35
Photo Booth
overview 21, 42 SuperDrive 21, 63
account or buddy
pairing 45 System Preferences
picture 48
remote rest 21, 43 audio 56
taking pictures 47
replacing the battery 46 Bluetooth preferences 53
power button 27
turning off IR reception 45 customizing 30
power indicator light 21
using 43 Displays preferences 58, 65
power port 11, 27
Energy Saver
PPPoE S
connections 103 preferences 18
safety 91
preferences. See System Prefer- Keyboard & Mouse
general instructions 91
ences preferences 40
scanners 59, 61
Print & Fax preferences 31 Print & Fax preferences 31
SDRAM. See memory
printing setup 31 setting 30
security slot
problems Software Update
location 27
AirPort Extreme 84 preferences 32, 84
securing your computer 68
computer freezes during Sound preferences 56
serial number 86
Index 113
Startup Disk V
preferences 61, 81 video camera. See iSight
turning off FileVault 16 video conferencing 49
turning off IR reception 45 video out port 25, 57
System Profiler 89
W
T Welcome to Tiger 28
telephone dial-up widget 28
connection 101 wireless
Tiger. See Mac OS X AirPort technology 51
transferring Bluetooth technology 52
files or documents 34 networking and Internet
troubleshooting 79 access 51
TV 57
U
updating software 32
USB
connecting devices 59
hubs 60
ports 23, 25
using multiple devices 60
using DHCP option 102
114 Index