, , | Job No:
Program: AXSYS® Ver: 4.1.0 (c) LEAP Software, Inc | Date: 1/15/2011
Phone: 800-451-LEAP (5327) Web-Site: www.leapsoft.com | By:
--------------------------------------------------------------------------------
INPUT DATA
-------------------------------------------------------------------------------
Project ID : dead load
Project description :
Project number :
Project date: Structure Type : COLUMN
User : Analysis Mode : AUTOMATIC
Design code : ACI-05
P-Delta analysis mode is using cracked section.
Moment magnifier analysis mode is using reduced section.
Inertia factor: 0.70 Area factor: 1.00
BetaD is used for effective inertia.
-------------------------------------------------------------------------------
CONCRETE DATA Wc,kg/m-3 : 2402.78
f'ci,MPa : 15.0 f'c,MPa : 20.0 Poisson Rat.: 0.2000
Ec,MPa : 22649 Gc,MPa : 9437 Creep Coeff.: 1.6000
fr,MPa : 2.35 ecu : 0.0030 Lt. Wt. Mod.: 0.7500
-------------------------------------------------------------------------------
Spring Constants for Joint #1: (kN-m/DEGREE) Miscellaneous
Z-Axis : 0.0 X-Axis : 0.0 Column Ties : TIED
-------------------------------------------------------------------------------
JOINT LOCATIONS AND RESTRAINTS Joint Restraints
Joint Distance from Z-Location X-Location Trans. Rotat.
Number Bottom (m ) of Joint (m ) of Joint (m ) Y Z X Y Z X
1 0.000 0.000 0.000 R R R R R R
2 3.050 0.000 0.000 U U U U U U
3 6.550 0.000 0.000 U U U U U U
4 10.050 0.000 0.000 U U U U U U
5 11.800 0.000 0.000 U U U U U U
-------------------------------------------------------------------------------
MEMBER DATA
kL computed using unbraced length between supports
Member No. : 1
Sect. ID : 40x40 cm Z Offset,mm : 0.00
# of Pts. : 3 Cm Override : 0.000 k Override : 0.000
Begin,m : 0.000 End,m : 3.050 X Offset,mm : 0.00
Area,mm-2 : 160000.0 Height,mm : 400.00 Ytop,mm : 200.00
Iz,E06mm-4: 2133 Width,mm : 400.00 Yleft,mm : 200.00
Ix,E06mm-4: 2133 V/S,mm : 100.00 Izx,E06mm-4 : 4267
Member No. : 2
Sect. ID : 40x40 cm Z Offset,mm : 0.00
# of Pts. : 3 Cm Override : 0.000 k Override : 0.000
Begin,m : 3.050 End,m : 6.550 X Offset,mm : 0.00
Area,mm-2 : 160000.0 Height,mm : 400.00 Ytop,mm : 200.00
Iz,E06mm-4: 2133 Width,mm : 400.00 Yleft,mm : 200.00
Ix,E06mm-4: 2133 V/S,mm : 100.00 Izx,E06mm-4 : 4267
Member No. : 3
Sect. ID : 40x40 cm Z Offset,mm : 0.00
# of Pts. : 3 Cm Override : 0.000 k Override : 0.000
Begin,m : 6.550 End,m : 10.050 X Offset,mm : 0.00
Area,mm-2 : 160000.0 Height,mm : 400.00 Ytop,mm : 200.00
Iz,E06mm-4: 2133 Width,mm : 400.00 Yleft,mm : 200.00
Ix,E06mm-4: 2133 V/S,mm : 100.00 Izx,E06mm-4 : 4267
Member No. : 4
Sect. ID : 40x40 cm Z Offset,mm : 0.00
# of Pts. : 3 Cm Override : 0.000 k Override : 0.000
Begin,m : 10.050 End,m : 11.800 X Offset,mm : 0.00
Area,mm-2 : 160000.0 Height,mm : 400.00 Ytop,mm : 200.00
Iz,E06mm-4: 2133 Width,mm : 400.00 Yleft,mm : 200.00
Ix,E06mm-4: 2133 V/S,mm : 100.00 Izx,E06mm-4 : 4267
-------------------------------------------------------------------------------
PRESTRESSING STRAND DATA
Losses: Manual. Rel. Loss: 0.000% Final Loss: 0.000%
Ld Modif.: 1.000 Fse,MPa:1034.21
-------------------------------------------------------------------------------
PRESTRESSED STRAND LAYOUT
None
-------------------------------------------------------------------------------
STRAND DEVELOPMENT LENGTH
None
-------------------------------------------------------------------------------
MILD REBAR DATA
Es,MPa : 199948 fy,MPa : 413.69 Ld Modifier : 1.000
-------------------------------------------------------------------------------
MILD REBAR LAYOUT
Depth to Layer Distance From Rebar End
at Start (mm) Joint #1 (m ) # of Spacing Anchorages
Top Left Start Stop Rebar ID Rebar (mm) Beg. End
45.00 45.00 0.000 11.800 Size 6 Bars 1 0.00 S S
355.00 45.00 0.000 11.800 Size 6 Bars 1 0.00 S S
355.00 355.00 0.000 11.800 Size 6 Bars 1 0.00 S S
45.00 355.00 0.000 11.800 Size 6 Bars 1 0.00 S S
200.00 45.00 0.000 11.800 Size 5 Bars 1 0.00 S S
355.00 200.00 0.000 11.800 Size 5 Bars 1 0.00 S S
200.00 355.00 0.000 11.800 Size 5 Bars 1 0.00 S S
45.00 200.00 0.000 11.800 Size 5 Bars 1 0.00 S S
-------------------------------------------------------------------------------
MILD REBAR TYPES
ID:Size 6 Bars Diam.,mm : 19.050 Area,mm-2: 283.870 Bar No.: 6
ID:Size 5 Bars Diam.,mm : 15.875 Area,mm-2: 200.000 Bar No.: 5
-------------------------------------------------------------------------------
REBAR DEVELOPMENT LENGTH
Layer Rebar ID Dev. Length At Start(mm) Dev. Length At Stop(mm)
1 Size 6 Bars 848.89 848.89
2 Size 6 Bars 848.89 848.89
3 Size 6 Bars 848.89 848.89
4 Size 6 Bars 848.89 848.89
5 Size 5 Bars 707.41 707.41
6 Size 5 Bars 707.41 707.41
7 Size 5 Bars 707.41 707.41
8 Size 5 Bars 707.41 707.41
-------------------------------------------------------------------------------
LOAD CASES
Case No. Description
1 MEMBER DEAD LOAD
2 Dead Load (DL)
3 Live Load (LL)
-------------------------------------------------------------------------------
JOINT LOADS
None
-------------------------------------------------------------------------------
CONCENTRATED MEMBER LOADS
Load Dist. Vertical
Case (m ) Load (kN) Pz (kN) Px (kN) Mz (kN-m) Mx (kN-m)
2 3.050 -129.600 0.000 0.000 0.00 46.65
2 6.550 -129.600 0.000 0.000 0.00 46.65
-------------------------------------------------------------------------------
DISTRIBUTED MEMBER LOADS (kN/m)
Load Beginning Ending Distances From Joint #1 Direction
Case Magnitude Magnitude Y1 (m ) Y2 (m )
-------------------------------------------------------------------------------
STRUCTURAL ANALYSIS
-------------------------------------------------------------------------------
Load Combination 1 (SERVICE : Service (1.0 DL + 1.0 LL))
CRACK CONTROL
-------------------------------------------------------------------------------
Load Combination 1 (Service (1.0 DL + 1.0 LL))
2.67 411.1 221.1 0 788 T 0.900 --- --- 221 360 270 116 172*
3.05 409.1 211.1 0 788 T 0.900 --- --- 211 360 270 116 172*
10.71 5.8 0.6 0 788 T 0.900 --- --- 1 360 270 63.6 119
10.93 4.6 0.4 0 788 T 0.900 --- --- 0 360 270 63.5 118