1 2
NAME OF PARTS LOCK AND UNLOCK THE DOOR
When the lock light is on, press START/PAUSE button, the Wash/Spin tub
Door Lock button
stop, then you will hear a “clicking” sound, which means the door has unlocked.
● The door will not open if you directly pulled out the electrical plug.
● If there is a power failure during the operation, wait for power on, press
Power Plug POWER ON/ OFF button, door will be unlocked automatically.
Power Cord
● Foam spill over if you open the door during washing process, use towel to
clean it.
● The door can not be unlocked in high temperature or high ozone density states.
Washer Door
USAGE INSTRUCTION FOR DETERGENT CASE
Frame
Wash/Spin Tub
Liquid detergent Powder synthetic
and Bleach detergents
Drain Hose ● Use low bubble liquid synthetic ● For the undissolved
Adjustable Leg (Only for AWD-L703HCT) detergents. detergents, for example:
● For the concentrated liquid powder state soap,
detergents, diluted it double times dissolve it in advance,
with water, then pour into the case. then pour into the case.
ACCESSORIES
Softener
Instruction manual Water Supply Hose “Magic" Hose Joint Drain Hose Lid ● Put into the case before washing,
(Only for AWD-L703HCT) ● High bubble Washer powder or detergent is
it will be poured into the tub forbidden.
Hose Band automatically at the last round of ● Use the detergents in accordance with the
rinse. instruction by its manufacturer.
● For the concentrated detergents, ● Excessive detergents will cause too much bubble
use corresponding proportion of and affect the rinse, also create function faults.
water to dilute it, then pour it into ● Choose suitable detergents in accordance with
the case. the type and color of clothes, the water
● No exceed to the full mark line. temperature and the stain.
3 4
NAMES AND FUNCTIONS OF CONTROL PANEL
PRESET button Digital display Indication SPEED button WARM button
● Press this button to preset the ● This indicator shows remained ● Indicate spin speed automatically ● Press this button to choose the
finish time of washing. time during washing. in accordance with the types of temperature of water according to the
(E.g) remaining time is 18 minutes program. type of clothes and stain.
● Set the speed according to your ● Scope of temperature set is different
need, some program limit the as the program changes, some
● When abnormal conditions occur, speed set. program have no water temperature
the indicator will indicate warning. set.
5 6
NORMAL USAGE HOW TO USE THE CUSTOMIZED COURSE
1.Preparation: You can set wash time, water temperature, rinse times, spin time,
spin speed and adjust operating time freely according to your
·Load the laundry into the washer. Close the washer door.
habit or laundry.
·Put the detergent and softener into the Detergent Case.
·Connect the Drain Hose. Connect the Water Supply Hose to the 1.Preparation:
faucet and turn the faucet on. Plug the Power Cord into a
socket-outlet. ·Load the laundry into the washer. Close the washer door.
·Put the detergent and softener into the Detergent Case.
·Connect the Drain Hose. Connect the Water Supply Hose to the
faucet and turn the faucet on. Plug the Power Cord into a
2.Press the ON/OFF button to turn the power on. socket-outlet.
3.Press the button and choose the NORMAL, HEAVY DUTY, 2.Press the ON/OFF button to turn the power on.
SOFT WASH, ECO-SPEEDY, SYNTHETIC FIBER course.
3.Press the button to select the CUSTOM course
5.At the end of operation, the buzzer will sound and the power will
be turned off automatically after 12 seconds. 5.Press the button, the washer will start the washing
operation.
·Wash and Spin capacity below 3.0 kg in “SYNTHETIC FIBER”
course. 6.At the end of operation, the buzzer will sound and the power will
·Wash and Spin capacity below 2.0 kg in the “ECO-SPEEDY” be turned off automatically after 12 seconds.
course.
7 8
HOW TO USE THE BLANKET COURSE HOW TO USE THE DELICATE COURSE
For washing blanket and other bulky items. For washing delicate and synthetic fiber clothes. They shall be
1.Fold the blanket washed as required in the labels.
1.Preparation:
·Load the laundry into the washer. Close the washer door.
·Put the detergent and softener into the Detergent Case.
Fold in two by the short side Fold once again in the ·Connect the Drain Hose. Connect the Water Supply Hose to the
same direction faucet and turn the faucet on. Plug the Power Cord into a
socket-outlet.
2.Put blanket into
the wash/spin tub.
2.Press the ON/OFF button to turn the power on.
5.Press the button to select the BLANKET course. ● Wash capacity should below 2.0kg.
● Take out the clothes in time when program ends, and hung to dry the
clothes, in case the clothes become distortion.
6.Press the button, the washer will start the washing operation. ● No wash preset.
● Water temperature should not exceed 30℃ to prevent distortion.
● Wash the white or bright-colored clothes separately from the dark-colored
7.At the end of operation, the buzzer will sound and the power will clothes.
be turned off automatically after 12 seconds. ● Use special detergent for wool to relieve damage of clothes, and improve
the wash effect.
● Do not use net bag for the machine washable blanket, otherwise the
washer vibrate abnormally and will be damaged in the spin process.
● Do not tweak or roll clothes into a boll before put them into the tub.
● Electric blanket and carpet are forbidden of wash.
● 100% villous and the long-villous blanket are forbidden of wash.
● Wash capacity of 100% synthetic fiber below 3.0kg.
● Wash capacity of 100% cotton blanket below 2.0kg.
● Water temperature should not exceed 30℃.
9 10
HOW TO USE THE AIR WASH COURSE HOW TO USE THE PRESET COURSE
Sterilization and peculiar smell-removing for leather products, The preset time means that when the washing is finished.
shoes, hats, handbag and toys.
1.Preparation:
1.Fold clothes in neat order and put them into the tub, then close ·Load the laundry into the washer. Close the washer door.
the washer door. ·Put the detergent and softener into the Detergent Case.
·Connect the Drain Hose. Connect the Water Supply Hose to the
faucet and turn the faucet on. Plug the Power Cord into a
2.Press the ON/OFF button to turn the power on. socket-outlet.
11 12
HOW TO USE THE DRY COURSE VARIOUS FUNCTIONS
Keep the faucet on during dry process, for the machine need water CHILD LOCK FUNCTION
to cool and dehumidify clothes. Child lock can be set to prevent children from getting into the tub. The door will
1.Preparation: be locked either in working or power off.
·Load the laundry into the washer. Close the washer door. Method of setting:
·Put the detergent and softener into the Detergent Case. After pressing POWER ON/OFF button to power on, press COURSE button for
·Connect the Drain Hose. Connect the Water Supply Hose to the over 4 seconds, until a sound from buzzer. Follow the same instruction listed
faucet and turn the faucet on. Plug the Power Cord into a above to unlock the door.
socket-outlet. ADD CLOTHES DURING THE OPERATION
2.Press the ON/OFF button to turn the power on. Used for adding clothes during operation.
Operation method:
press START/PAUSE button, door lock light turns off , the door is unlocked. You
can open the door, add clothes into the tub, close the door, press START/PAUSE
3.Press the button to select the desired program course button, the program will continue.
13 14
COURSE CHOOSING GUIDE CARE AND MAINTENANCE
● Washing machine should be kept in good maintenance during long time of
WASH WATER WASHING
RINSE SPINING SPINING TOTAL use. Good using habit could extend its working life.
COURSE CAPACITY TEMPERATURE TIME(min.) TIME(min.) SPEED TIME(min.) ● Pull out the plug when in maintenance, in case of electricity danger.
(kg) (℃) TIMES
Washer body Clean methods of the detergents
30 30 2 6 700 approx. case
NORMAL 6.2 (Cold water、20~60)(10~5 0) (1~4) (1、3、6、9)(500~Max.) 69 min.
● Wipe the machine body with soft clean
cloth. Dip the cloth into detergents or ● Clean the detergents case regularly in
liquid soap and then clean the machine case that detergents remained in the
HEAVY 30 50 3 9 700 approx. body when there is heavy dirt on it. box get mildew.
DUTY 6 .2 (10~5 0) (1~4)
(Cold water、20~60) (1、3、6、9)(500~Max.) 105 min. ● Do not pour water directly on the machine. ● Pull out while lift the box to carry it out,
● Do not clean the machine body with clean it by water and restore it.
scouring powder, diluents, gasoline,
SOFT 30 30 2 1 700 approx. alcohol, and other chemical things.
WASH 6.2 (10~5 0) (1~4)
(Cold water、20~60) (1、3、6、9) (500~900) 64 min.
(500~900) 1 Drag upword
Sealing washer of the door
30 30 2 6 700 approx. Wipe the dirt and fabric scrap away by towel
2 Pull out
CUSTOM 6 .2 (Cold water、20~60)(10~5 0) (1~4) (1、3、6、9)(500~Max.) 69 min.
horizontally
every time after use. If there are things like
pin in the groove of the sealing washer,
20 3 6 700 approx. make sure to fetch them out.
BLANKET 3 .0 (10~3 0) (1~4)
(Cold water、20~30) (1、3、6) (500~900) 72 min.
Clean “ magic ” hose joint filter When the washer be frozen
(Suggest clean it every 6 months)
10 1 3 700 approx.
ECO-SPEEDY 2 .0 (10~3 0) (1~4) (1、3、6、9) (500~900) 33 min. 1.Pull the water inlet hose out. 1.Wrap the faucet and “ Magic ” Hose
2.Turn off the revolver according to below Joint by hot towel .
photo. Faucet
SYNTHETIC 30 30 2 6 700 approx.
FIBER
3 .5 (Cold water、20~40)(10~3 0) (1~4) (1、3、6、9) (500~900) 69 min.
Revolver
“ Magic ”
Hose Joint
Water
Supply Hose
20 3 3 approx.
DELICATE 2 .0 (10~3 0) (1~4) (1、3)
(Cold water、20~30)
500 69 min. 3.Load off the “ Magic ” Hose Joint filter and
clean the crud with a toothbrush. 2.Dismount the Water Supply Hose
and soak it into about 50℃ hot water.
AIR approx. Filter
17 18
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
How to Attach the “ Magic ” Hose Joint
Transportation 1.Loosen the four screws and slide the top of the "Magic"Hose Joint(section A in the
Two people are required in transportation. The figure)onto the faucet. Then, securely tighten the four screws provided with the
washer should be kept upright, each people hold “Magic" Hose Joint by using a screwdriver to secure the top of the joint to the faucet.
the bottom of one side to move the machine. 2.Remove the CAUTION label from the "Magic" Hose Joint.
3.Turn the male coupler on the joint (section B in the figure) clockwise to attach it securely
to the top of the joint (section A in the figure).
Remove the bolt used to fix the ● The appliance is to be connected to the
machine in transportation water mains using new Water Supply Screw A After tightened
Hose and “Magic" Hose Joint and old
About 4mm
To protect the machine in transportation, there are two bolts inserted into the inner part hose-sets should not be reused. CAUTION (About 2mm or less)
B
of the machine. Remove these bolts before use. (otherwise there will be strong shock, CAUTION: label
noise, and disfunction in spin process.) If outer diameter of faucet is larger than
1
1.Unscrew the bolts that are fixed before calibre of the Joint Ring, loosen the four
transportation by spanner(two bolts) screws and remove the Joint Ring from Joint Ring
2.Remove the bolts horizontally. 2 the "Magic" Hose Joint.
3.Fit the lid into the holes .
Installing Water Supply Hose to the Washer
3
● Let the sales force or professional
maintenance worker to install the machine. 1.Turn the nut clockwise while holding the hose.
● Keep the dismounted bolts carefully , ● Turn the nut counterclockwise after turning the
you will need them in house moving. faucet off when you want to detach the Water water inlet Valve Nut
Supply Hose.
● NOTE: Connecting the Water Supply Hose to the “ Magic ” Hose Joint
Detach the protection washer C
before use the machine. 1.While pushing the sleeve on the female coupler
Lock Lever
(section D in the figure) of the joint down with Sleeve
your fingers, connect the female coupler to the
male coupler (section C in the figure).
Adjust the machine horizontally D
2.Release the sleeve, then push the Water Supply
Hose up into the “ Magic ” Hose Joint until it
There will be strong shock, noise, and disfunction in operation if the washing machine is clicks into place.
not steadily installed. Please adjust 3.Pull the Water Supply Hose down to make sure
the front two adjustable Leg. 1. 3.
Methods are as follows: that it is securely attached.
1.Check whether the washer is on Opening
a level surface using a plumb line How to Detach the Water Supply Hose
as shown in the Beside figure. plumb
line
● The washer is on level ground Please read the following procedure in order to avoid spilling water when detaching the
floor if the Frame line of washer Opening
Water Supply Hose.
is parallel with the plumb line. 1.Turn the faucet off.
2.Adjust the Adjustable Leg of FRONT VIEW Plumb SIDE VIEW
washer if necessary to make the 2.Press the POWER ON/OFF button to turn the power on ,the C
washer level as shown in the NORMAL button and the START/PAUSE button.
Beside figure. 2. Fundus 1 Fundus 3.Press the POWER ON/OFF button to turn the power off Lock
15 seconds later. Lever Sleeve
3.Put your hands on the washer Loosen Tighten
diagonally, press and shake the 4.While pushing the lock lever and the sleeve on the female
washer slightly to make sure 2 Down Up 3 Screw on the Lock
(section D in the figure)of the joint down with your fingers, D
that the washer is steady. nut by wrench. detach the female coupler from the male coupler
(section C in the figure).
19 20
INSTALLATION INSTRUCTIONS WARNING - This appliance must be earthed.
How To Installing The Drain Hose (Only for AWD-L703HCT)
1.Install the Drain Hose to the Drain Outlet (as instructed on the photo), then fix it by FOR WASHER PLUG TOP 3 PIN ( For BS Standard Plug With A 13 Amp Fuse )
Hose Band.
2.Place the other end of the hose to cloacae, keep suitable gap between hose mouth IMPORTANT
and cloacae for easier draining.
The wires in this mains lead are coloured in accordance with the following code:
Drain Outlet
Green/yellow: Earth Light Blue: Neutral Brown: Live
Drain Hose As the colours of the wires in the mains lead of this appliance may not correspond
with the coloured markings identifying the terminals in your plug, proceed as follows:
Hose Band
Extension of the Drain Hose ● The wire which is coloured green and yellow must be connected to the terminal
● Height of middle drain hose should be less than 10cm. in the plug which is marked with the letter E or by the earth symbol
or coloured green or green and yellow.
● The length of the drain hose should be less than 3m if use elongate one, and its middle ● The wire which is coloured light blue must be connected to the terminal which is
should not be raised up. marked with the letter N or coloured white.
● The wire which is coloured brown must be connected to the terminal which is marked
Max.3m Max.10cm with the letter L or coloured black.
● Wipe the Power Plug with a soft cloth and remove any dust to prevent a risk of the
accidental fire before plugging into the socket-outlet.
Changing the Drain Hose Direction ● To prevent electric shock, be sure to provide adequate
● Drain direction left or right is optional electrical grounding for the washer.
● Do not plug two Power Cords in one socket-outlet.
● If drain direction change needed, please contact the nearest authorized service center
or dealer.
How To Installing The Drain Hose (Only for AWD-L703HCTP)
1.Put the drain hose to back (as instructed on the photo 1) when the washer is not
FOLLOWING CAUTIONS ARE FOR WASHER USING DOUBLECORE
working. CORD ONLY.
2.put the drain hose to drain spout (as instructed on the photo 2) when washer start
working.
● If the 2-pin type of socket-outlet has a grounding terminal,
1. Please make sure this bolt is fixed 2. securely attach the end of the Grounding Wire to the
during operating, otherwise, the
Drain Hose terminal.
washer won’t work. ● When grounding the washer, connect the grounding wire
before plugging in the Power Cord.
● If the 2-pin type of the socket-outlet has no grounding
terminal, consult your nearest dealer or securely attach the
end of Grounding Wire to a suitable grounding point, such
as a metal cold water pipe. Grounding Grounding
Never connect the Grounding Wire to a gas pipe. Terminal Wire Of
● Unplug the Power Cord before disconnecting the Grounding Washer
Wire.
Max.1200 mm
Grounding
Grounding Wire
Drain Hose Rod
21 22