Anda di halaman 1dari 21

ORDER No.

99-SM-009

Colour Television

TX-28CK1P
TX-25CK1P

TX-21CK1P
Z8 Chassis

SPECIFICATION
(Information in brackets { } refers to model TX-25CK1P)
(Information in brackets [ ] refers to model TX-21CK1P)

Power Source: 220-240V a.c., 50Hz AV FRONT Video (21 pin) 1V p-p 75Ω
Audio (21 pin) 500mV rms 10kΩ
Power Consumption: 97W {97W} [88W]
High Voltage: 28kV +0,7kV - 1kV {28kV +0,7kV -1kV}
Stand-by Power [27kV +0.7kV - 1kV]
Consumption: 0,9W {0,9W} [1W]
Picture Tube: A66ECF50X04 63cm
Aerial Impedance: 75Ω unbalanced, Coaxial Type {A59ECF50X04 59cm}
[ A51EER35X80 51cm]
Receiving System: PAL B/G, PAL D/K ,PAL-60 Audio Output: 2 x 10W (M.P.O.)
SECAM B/G, SECAM D/K 2 x 5W (R.M.S.)
M.NTSC (AV) 8Ω Impedance
NTSC (AV only) Headphones: 8Ω Impedance
3,5mm
Receiving Channels: Accessories
VHF E2-E12 VHF H1-H2 (ITALY) supplied : Remote Control
VHF A-H (ITALY) VHF R1-R2 2 x R6 (UM3) Batteries
VHF R3-R5 VHF R6-R12
UHF E21-E69 CATV (S01-S05) Dimensions:
CATV S1-S10 (M1-M10) CATV S11-S20 (U1-U10) Height: 580mm {538mm} [476mm]
CATV S21-S41 (HYPERBAND) Width: 646mm {580mm} [512mm]
Depth: 471mm {442.5mm} [470mm]
Intermediate Frequency:
Video/Audio Net weight: 33kg {27kg} [20.6kg]
Video 38,9MHz
Audio 32,4MHz, 32,66MHz (A2 CZECH) Specifications are subject to change without notice.
33,05MHz (NICAM) Weights and dimensions shown are approximate.
33,4MHz, 33,16MHz (A2)
33,05MHz (NICAM B/G) NOTE: This Service Manual should be used in conjunction with
Colour 34,47MHz the Z8 Technical guide.
34,5MHz, 34,65MHz
Terminals:
AV1 IN Video (21 pin) 1V p-p 75Ω
Audio (21 pin) 500mV rms 10kΩ
RGB (21 pin) 0,7V p-p 75Ω

AV1 OUT Video (21 pin) 1V p-p 75Ω


Audio (21 pin) 500mV rms 1kΩ
CONTENTS
SAFETY PRECAUTIONS..........................................................................................................................................................2
SERVICE HINTS .......................................................................................................................................................................3
ADJUSTMENT PROCEDURE AND FACTORY SETTINGS .....................................................................................................4
WAVEFORM PATTERN TABLE ...............................................................................................................................................5
ALIGNMENT SETTINGS...........................................................................................................................................................6
BLOCK DIAGRAMS ..................................................................................................................................................................7
PARTS LOCATION .................................................................................................................................................................10
REPLACEMENT PARTS LIST ................................................................................................................................................11
SCHEMATIC DIAGRAMS .......................................................................................................................................................20
CONDUCTOR VIEWS.............................................................................................................................................................25

SAFETY PRECAUTIONS
GENERAL GUIDE LINES
1. It is advisable to insert an isolation transformer in the 5. Reverse the a.c. plug at the outlet and repeat each of
a.c. supply before servicing a hot chassis. the above measurements.
2. When servicing, observe the original lead dress in the
high voltage circuits. If a short circuit is found, replace
all parts that have been overheated or damaged by
the short circuit.
3. After servicing, see that all the protective devices
HOT CHECK CIRCUIT
such as insulation barriers, insulation papers, shields
and isolation R-C combinations are correctly
a.c. VOLTMETER
installed.
4. When the receiver is not being used for a long period
of time, unplug the power cord from the a.c. outlet.
5. Potentials as high as 28,7kV, {28,7kV}, [27,7kV] are
present when this receiver is in operation. Operation
of the receiver without the rear cover involves the
danger of a shock hazard from the receiver power Ω 10 Watts
2kΩ WATER PIPE
(EARTH)
supply. Servicing should not be attempted by anyone
who is not familiar with the precautions necessary TO INSTRUMENT'S EXPOSED
when working on high voltage equipment. Always METALLIC PARTS
Fig. 1.
discharge the anode of the tube.
6. After servicing make the following leakage current
checks to prevent the customer from being exposed 6. The potential at any point should not exceed
to shock hazard. 1,4Vrms. In case a measurement is outside the limits
LEAKAGE CURRENT COLD CHECK specified, there is a possibility of a shock hazard, and
1. Unplug the a.c. cord and connect a jumper between the receiver should be repaired and rechecked before
the two prongs of the plug. it is returned to the customer.
2. Turn on the receiver’s power switch.
3. Measure the resistance value with an ohmmeter, X-RADIATION WARNING
between the jumpered a.c. plug and each exposed 1. The potential sources of X-Radiation in TV sets are
metallic cabinet part on the receiver, such as screw the high voltage section and the picture tube.
heads, aerials, connectors, control shafts etc. When 2. When using a picture tube test jig for service, ensure
the exposed metallic part has a return path to the that the jig is capable of handling 28,7kV, {28,7kV},
chassis, the reading should be between 4M ohm and [27,7kV] without causing X-Radiation.
20M ohm. When the exposed metal does not have a
return path to the chassis, the reading must be NOTE: It is important to use an accurate periodically
infinite. calibrated high voltage meter.
LEAKAGE CURRENT HOT CHECK 1. Set the brightness to minimum.
1. Plug the a.c. cord directly into the a.c. outlet. Do not 2. Measure the high voltage. The meter should indicate.
use an isolation transformer for this check. TX-28,25CK1P 28kV +0,7kV -1kV.
2. Connect a 2kΩ 10W resistor in series with an TX-21CK1P 27kV +0,7kV -1kV.
exposed metallic part on the receiver and an earth, If the meter indication is out of tolerance, immediate
such as a water pipe. service and correction is required to prevent the possibility
3. Use an a.c. voltmeter with high impedance to of premature component failure.
measure the potential across the resistor. 3. To prevent any X-Radiation possibility, it is essential
4. Check each exposed metallic part and check the to use the specified tube.
voltage at each point.

2
ADJUSTMENT PROCEDURE
Item / Preparation Adjustments
+B SET-UP Confirm the following voltages.
1. Receive a Greyscale signal.
2. Set the controls :- +B1 3,3 ± 0,3V +B13 -13 ± 1V
+B2 195 ± 10V +B14 27,5 ± 1,5V
Brightness Minimum {195 ± 10V} {27,5 ± 1,5V}
[190 ± 10V] [27,5 ± 1,5V]
Contrast Minimum +B3 13,5 ± 1V +B15 28 ± 1,5V
{13,5 ± 1V} {28 ± 1,5V}
Volume Minimum [12,5 ± 1V] [28 ± 1,5V]
+B4 10 ± 1V +B16 11,5 ± 1V
+B8 5 ± 0,3V {11,5 ± 1V}
+B11 147 ± 10V [11,5 ± 1V]
{ 147 ± 10V} +B17 8 ± 1V
[127 ± 10V] +B18 5 ± 0,3V

CUT OFF / Ug2 Adjustment Set Contrast on maximum, set Brightness on center, switch
1. Receive a Greyscale signal. on AV mode.
2. Degauss the tube externally. Enter Service mode. Set Sub-Brightness to 31. Select Ug2
3. Set the TV into Service Mode 1. Test. Press "+" and adjust screen Vr till sharp vertical line is
4. Select Ug2 Test. visible and LED switches off. Then reduce screen Vr till LED
is just switched on (pin6 of connector E6 must be connected
to GND).
Note: To set up ”white balance” first set up “Cut off” register to 8. Then set up “high-light” with the help of “drive” registers.
Finish setting-up of “Low-light” with the help of ”Cut-off” register.
Carry out setting-up of ”white balance” in available TV systems (PAL, SECAM).

FACTORY SETTINGS
To return customer settings to factory settings and clear owner ID of all information input by the customer, enter Self-Check
mode. Press the down (-/v) button on the customer controls at the front of the TV set, at the same time pressing the STATUS
button on the remote control. To exit Self Check, switch off the TV set at the power button.
NOTE: Self Check should only be used when refurbishing the TV set and not during normal repair work.

OPTION 1 6C {OPTION 1 6C} [OPTION 1 4C]

OPTION 2 00 {OPTION 2 00} [OPTION 2 00]

Service Aids
To aid in the service of our current chassis there are a number of Service Aids which have been made available.
• LUCI interface kit (Linked Utility Computer Interface)
Part number: TZS6EZ002
This contains interface and cables for connecting TV service connector and a PC as well as diagnostic software. As new
models are introduced upgrade software will become available.
• VICI (Visual Interactive Computer Information)
These C.D.'s contain multimedia documentation providing quick access to service information.
Part No. TZS7EZ006, TZS7EZ005 & TZS8EZ001
1. Service Manuals
2. Instruction Books
3. Technical Information
• TASMIN (Technically Advanced System for Multimedia Interactive Notes)
As well as providing a first step towards more interactive training this product also achieves quick access to Technical
Information.

4
WAVEFORM PATTERN TABLE

IC 601 VERT - OUT IC 451 VERT - DRIVE IC 451 VFLB


Pin 21 Pin 2 Pin 3

28,4V
50V
1V

20ms 20ms 20ms

IC 601 H - OUT IC 701 EW - OUT Base Q501 H - PULSE


Pin 33 Pin 5
20V

1,4V
3V

64µs 64µs 64µs

IC 701 HFLB IC 601 FBI/SCO IC601 VIDEO OUT


Pin 8 Pin 34 Pin 38
2,7 V
5,7V
2V

64µs 64µs
64 µs

IC 601 R - OUT IC 601 G - OUT IC 601 B - OUT


Pin 51 Pin 52 Pin 53
2,7V

2,7V

2,7V

64µs 64µs 64µs

IC 601 SCL
Pin 2
5V

47µs

5
ALIGNMENT SETTINGS
Enter in service mode:
By imputing remote code "FA" followed by key "0" (19 hex) or press "MUTE" on remote control and "V" on TV set, when the
sharpness is set on minimum and programme position is on 99.
Use ∧=/=∨
∨=remote buttons to cycle through the service items.
Use +=/=−
− remote keys to decrement / increment the values within range.
STR lokal key stores the current data.
To exit service mode press "N" button.
Setting indication
Alignment Function Note: All setting values are approximate Settings / Special features

LED On/Off
1. Cut off (Ug2) LED to be just On
(pin6 of connector E6 to the GND)
2. Vertical slope V-SLO 32 Optimum setting
3. Vertical shift V-POS 43 Optimum setting.
4. Vert. Amplitude V-AMP 60 Optimum setting.
5. Horizontal shift H-CTR 31 Optimum setting.
6. Horizontal parallelogram H-PAR 034 {034} [-] Optimum setting.
7. Horizontal bow H-BOW 031 {031} [-] Optimum setting.
8. R - Cut R - CUT 8 Optimum setting.
9. B - Cut B - CUT 8 Optimum setting.
10. R - Drive R - DRV 31 Optimum setting.
11. G - Drive G - DRV 31 Optimum setting.
12. B - Drive B - DRV 31 Optimum setting.
13. AGC AGC 20 Optimum setting.
14. Sub Colour S - COL 15 Optimum setting.
15. Sub Brightness S - BRI 31 Optimum setting.

For models TX-25CK1P and TX-28CK1P only:


Setting indication
Alignment Function Settings / Special features
Note: All setting values are approximate
18. Horizontal Width EW – WD 34 Optimum setting.

19. EW parabola EW – PR 32 Optimum setting.

20. EW Upper corners EW – UC32 Optimum setting.

21. EW Lower corners EW – LC 33 Optimum setting.

22. EW Trapezoid EW – TP 36 Optimum setting.

Imput remote code "FA" followed by key 5 (14 hex) or press "V" on remote control:
Option Byte - 1 Option Byte Table Option Byte - 2 Option Byte Table

Bit No. Value Functions Bit No. Value Functions


0 NO
0 0 French model 0 0
1 YES
0 NO
1 0 Irish model 1 0
1 YES
0 NO
2 1 NICAM enabled 2 0
1 YES
0 NO
3 1 A2 stereo enabled 3 0
1 YES
0 MACO
4 0 Tuner manufacturer 4 0
1 ALPS
0 21"
5 1 [0] CRT 5 0
1 25",28"
0 NO
6 1 Q - link enabled 6 0
1 YES

6
  

 
< <
9
 

(
7
+2

(

(
  



  


<
5(3/$&(0(173$576/,67

,PSRUWDQW6DIHW\1RWLFH
&RPSRQHQWV,GHQWLILHGE\PDUNKDYHVSHFLDOFKDUDFWHULVWLFVLPSRUWDQWIRUVDIHW\

:KHQUHSODFLQJDQ\RIWKHVHFRPSRQHQWVXVHRQO\PDQXIDFWXUHUVVSHFLILHGSDUWV
,QFDVHRIRUGHULQJWKHVHVSDUHSDUWVSOHDVHDOZD\VDGGWKHFRPSOHWH0RGHO7\SH
QXPEHUWR\RXURUGHU

&FW5HI 3DUWV1XPEHU 'HVFULSWLRQ &FW5HI 3DUWV1XPEHU 'HVFULSWLRQ

' 0$7$ ',2'(

&200213$576 ' 07=-7& ',2'(

' 07=-7& ',2'(

' 07=-7% ',2'(


0(&+$1,&$/3$576
' 65$7 ',2'(
 ($6*'$ 63($.(5
' 65$7 ',2'(
 (19'* 781(5
' 65$7 ',2'(
 (85 5(027(&21752/
' 0$7$ ',2'(
 (85(&$ %$77(5<&29(5
' 0$7$ ',2'(
 7%0( 3$1$%$'*(
' 0$7$ ',2'(
 7%;( 32:(5%8721
' 0$7$ ',2'(
 7%;( .(<%8721
' (5$9 ',2'(
 7..( $9&29(5
' 07=-% ',2'(
 70=( &+$66,65$,/5,*+7
' 65$7 ',2'(
 70=( &+$66,65$,//()7
' 07=-7$ ',2'(
 76;( 32:(5&25'
' 65$7 ',2'(

' 0$7$ ',2'(

' 07=-7$ ',2'(

' 0$7$ ',2'(

0,6&(//$1(286&20321(176 ' 0$7$ ',2'(

' 5%9 ',2'(


 7.3( /,*+778%(
' $89 ',2'(
 7.3( /('9,625
' 7/3*5/) 3+272&283/(5
 80'-3 %$77(5<3$&.
' 65$7 ',2'(
32( 70:( /('+2/'(5
' 65$7 ',2'(
5 3 6(1625
' 5.1/)$ ',2'(
5/ '-'0 5(/$<
' 0$7$ ',2'(
,16758&7,21%22.6
' 65$7 ',2'(

 74%(01 %8/*$5,$1520$1,$1


' 0$7$ ',2'(

 74%(34 32/,6++81*$5,$1


' 07=-7' ',2'(

 74%(58 &=(&+(1*/,6+


' 79658$0/)$ ',2'(

,&V ' 79658$0/)$ ',2'(

,& 7'$ $8',2287387 ' 65$7 ',2'(

,& 675)/) 32:(56833/< ' 07=-7$ ',2'(

,& /005% 95(*8/$725 ' 6/585)/) /('

,& %$70 95(*8/$725 ' 0$7$ ',2'(

,& 01+7$ 5(6(7,& ' 0$7$ ',2'(

,& 530 /('5(&(,9(5 ' 7966:%6 ',2'(

,& 015 7$ 5(6(7 ' 0$7$ ',2'(

,& %$7 95(*8/$725 ' 0$7$ ',2'(

,& %$70 95(*8/$725 ' 07=-7$ ',2'(

,& 063'32$ $8',2352&(6625 75$16,67256

)86(6 4 %&% 75$16,6725

)  )86( 4 %&% 75$16,6725

) 757 )86( 4 %&% 75$16,6725

) 757 )86( 4 %&% 75$16,6725

) 757 )86( 4 6'0 75$16,6725

) (<)%& )86(+2/'(5 4 %&% 75$16,6725

) (<)%& )86(+2/'(5 4 %&% 75$16,6725

4 %&% 75$16,6725


',2'(6
4 %&% 75$16,6725
' 07=-7$ ',2'(
4 6$5 75$16,6725
' 07=-7$ ',2'(


&FW5HI 3DUWV1XPEHU 'HVFULSWLRQ &FW5HI 3DUWV1XPEHU 'HVFULSWLRQ

4 6'5 75$16,6725 -$ (5-*(<5 60&$5% :  

4 %&% 75$16,6725 -$ (5-*(<5 60&$5% :  

4 %&% 75$16,6725 -$ (5-*(<5 60&$5% :  

4 %&% 75$16,6725 -$ (5-*(<5 60&$5% :  

4 %&% 75$16,6725 -$ (5-*(<5 60&$5% :  

4 %&% 75$16,6725 -$ (5-*(<5 60&$5% :  

4 %&% 75$16,6725 -$ (5-*(<5 60&$5% :  

4 %&% 75$16,6725 -$ (5-*(<5 60&$5% :  

4 %&% 75$16,6725 -$ (5-*(<5 60&$5% :  

4 %&% 75$16,6725 -$ (5-*(<5 60&$5% :  

4 %&% 75$16,6725 -$ (5-*(<5 60&$5% :  

4 %&% 75$16,6725 -$ (5-*(<5 60&$5% :  

4 %&% 75$16,6725 -$ (5-*(<5 60&$5% :  

4 %&% 75$16,6725 -$ (5-*(<5 60&$5% :  

4 %&% 75$16,6725 -$ (5-*(<5 60&$5% :  

4 6&6 75$16,6725 -$ (5-*(<5 60&$5% :  

75$16)250(56 -$ (5-*(<5 60&$5% :  

-$ (5-*(<5 60&$5% :  


7 (7+=$= 75$16)25(5
-$ (5-*(<5 60&$5% :  
7 (73.$18 75$16)250(5

&2,/6 -$ (5-*(<5 60&$5% :  

-$ (5-*(<5 60&$5% :  


- (;&(/6$7 &2,/
-$ (5-*(<5 60&$5% :  
/ 7$/99%. &2,/
-$ (5-*(<5 60&$5% :  
/ 7$/99%. &2,/
-$ (5-*(<5 60&$5% :  
/ 7$/99%. &2,/
-$ (5-*(<5 60&$5% :  
/ (;&(/'59 &2,/
-$ (5-*(<5 60&$5% :  
/ (;&(/6$7 &2,/
-6( (5-*(<5 60&$5% :  
/ (;&(/'59 &2,/
-6( (5-*(<5 60&$5% :  
/ (;&(/6$7 &2,/
-6( (5-*(<5 60&$5% :  
/ (;&(/6$7 &2,/
-6( (5-*(<5 60&$5% :  
/ (;&(/6$7 &2,/
-6( (5-*(<5 60&$5% :  
/ 7$/99%. &2,/
-6( (5-*(<5 60&$5% :  
/ 7$/99%5. &2,/
-6( (5-*(<5 60&$5% :  
/ 7$/99%5. &2,/
-6( (5-*(<5 60&$5% :  
/ (;&(/6$7 &2,/
-6( (5-*(<5 60&$5% :  
/ 7$/99%5. &2,/
5 (5-*(<- 60&$5% :  
/ 7$/99%. &2,/
5 (5-*(<- 60&$5% :  
/ 7/7.5 &2,/
5 (5-*(<- 60&$5% :  .
/ 7/7.5 &2,/
5 (5*6-6 0(7$/ :  .
/ (;&(/6$7 &2,/
5 (5-*(<5 60&$5% :  
/ (;&(/6$7 &2,/
5 (5-*(<- 60&$5% :  .
/ 7$/99%. &2,/
5 (5-*(<- 60&$5% :  .
/ (;&(/'59 &2,/
5 (5-*(<- 60&$5% :  
/ (;&(/'59 &2,/
5 (5-*(<5 60&$5% :  

),/7(56 5 (5-*(<- 60&$5% :  .

/ (/)1$ /,1(),/7(5 5 (5-*(<- 60&$5% :  

; .. 6$:),/75 5 (5-*(<- 60&$5% :  .

&5<67$/6 5 (5-*(<- 60&$5% :  

5 (5-*(<- 60&$5% :  


; 766$ &5<67$/
5 (5-*(<- 5(6,6725 :  
; ()&:6)7 &5<67$/
5 (5-*(<- 60&$5% :  .
;  &5<67$/

5(6,67256
5 (5-*(<- 5(6,6725 :  

5 (5-*(<- 60&$5% :  .

& (5-*(<5 60&$5% :  


5 (5-*(<- 60&$5% :  

- (5'79 5(6,6725 :  


5 (5-*(<- 60&$5% :  .

-$ (5-*(<5 60&$5% :  


5 (5-*(<- 60&$5% :  .

-$ (5-*(<5 60&$5% :  


5 (5-*(<- 60&$5% :  .

-$ (5-*(<5 60&$5% :  


5 (5'7-5 &$5%21 :  5

-$ (5-*(<5 60&$5% :  


5 (5'7-5 &$5%21 :  5

-$ (5-*(<5 60&$5% :  


5 (5-*(<- 60&$5% :  .

-$ (5-*(<5 60&$5% :  


5 (5-*(<- 5(6,6725 :  .

-$ (5-*(<5 60&$5% :  


5 (5-*(<- 5(6,6725 :  .

-$ (5-*(<5 60&$5% :  


5 (5'67- &$5%21 :  .

-$ (5-*(<5 60&$5% :  


5 (5'67- &$5%21 :  .

-$ (5-*(<5 60&$5% :  


5 (5'67- &$5%21 :  .

-$ (5-*(<5 60&$5% :  


5 (5'67- &$5%21 :  .

-$ (5-*(<5 60&$5% :  


&FW5HI 3DUWV1XPEHU 'HVFULSWLRQ &FW5HI 3DUWV1XPEHU 'HVFULSWLRQ

5 (5'67- &$5%21 :  . 5 (5*)- 0(7$/ :  

5 (5'67- &$5%21 :  . 5 (5*)- 0(7$/ :  

5 (5-*(<- 60&$5% :  . 5 (5'67-5 &$5%21 :  5

5 (5-*(<- 60&$5% :  . 5 (5'7- &$5%21 :  

5 (5-(1) 60&$5% :   5 (5'7- &$5%21 :  .

5 (5-(1) 60&$5% :   5 (5'67- &$5%21 :  .

5 (5-(1) 60&$5% :   5 (5-*(<- 60&$5% :  

5 (5-*(<-5 60&$5% :   5 (5-*(<- 60&$5% :  

5 (5-*(<- 60&$5% :  . 5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :  . 5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :   5 (5-*(<- 60&$5% :  .

5 (5-(1) 60&$5% :   5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :   5 (5-*(<- 60&$5 :  .

5 (5'7- &$5%21 :  . 5 (5-*(<- 60&$5% :  .

5 (5*6-6+ 5(6,6725 :   5 (5-*(<- 60&$5% :  .

5 (5*$1- 0(7$/ :   5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :  . 5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :  . 5 (5-*(<- 60&$5% :  

5 (5'67- &$5%21 :   5 (5-*(<- 60&$5% :  

5 (54&-3 )86,%/( :  . 5 (5-*(<- 60&$5% :  

5 (5-*(<- 60&$5% :  . 5 (5-*(<- 60&$5% :  

5 (5-(1) 60&$5% :   5 (5-*(<- 60&$5% :  

5 (5-*(<- 60&$5% :   5 (5-*(<- 60&$5% :  

5 (5-*(<- 60&$5% :   5 (5-*(<- 60&$5% :  

5 (5-*(<- 60&$5% :   5 (5-*(<- 60&$5% :  

5 (5-*(<- 60&$5% :  . 5 (5-*(<- 60&$5% :  

5 (5-*(<- 60&$5% :   5 (5-*(<- 60&$5% :  

5 (5-*(<- 60&$5% :   5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :   5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :  . 5 (5-*(<- 60&$5% :  0

5 (5-*(<- 60&$5% :  . 5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :   5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :   5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :   5 (5-*(<- 60&$5% :  

5 (5-*(<- 60&$5% :   5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :   5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :   5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :   5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :   5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :  . 5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :  . 5 (5-*(<- 60&$5% :  .

5 (5-*(<5 60&$5% :   5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :  . 5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :  . 5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :  . 5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :  . 5 (5'67- &$5%21 :  

5 (5-*(<- 60&$5% :  . 5 (5-*(<- 60&$5% :  .

5 (5-(1) 60&$5% :  . 5 (5-*(<- 60&$5% :  .

5 (523.) 0(7$/ :  . 5 (5'67- &$5%21 :  

5 (5-*(<- 60&$5% :   5 (5-*(<- 60&$5% :  

5 (5-*(<- 60&$5% :   5 (5-*(<- 60&$5% :  

5 (5-*(<- 60&$5% :   5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :   5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :   5 (5-*(<- 60&$5% :  .

5 (5&=*.' 62/,' :  0 5 (5-*(<- 60&$5% :  

5 (5)=.5 :281' :  5 5 (5-*(<- 60&$5% :  

5 (5*$1- 0(7$/ :  . 5 (5-*(<- 60&$5% :  

5 (5'67- &$5%21 :  . 5 (5-*(<- 60&$5% :  .

5 (5'67- 5(6,6725 :  . 5 (5-*(<- 60&$5% :  .

5 (5'67- &$5%21 :  . 5 (5-*(<- 60&$5% :  

5 (54+- )86,%/( :   5 (5-*(<- 60&$5% :  

5 (5'7$- &$5%21 :  0 5 (5-*(<- 60&$5% :  .

5 (5'67- &$5%21 :   5 (5-*(<- 60&$5% :  

5 (5'67- &$5%21 :   5 (5-*(<- 60&$5% :  

5 (5*6-6+ 5(6,6725 :   5 (5-*(<- 60&$5% :  

5 (5*6-6+ 5(6,6725 :   5 (5-*(<- 60&$5% :  .


&FW5HI 3DUWV1XPEHU 'HVFULSWLRQ &FW5HI 3DUWV1XPEHU 'HVFULSWLRQ

5 (5-*(<- 60&$5% :  . & (&.&+- &(5$0,& 9 S)

5 (5-*(<- 60&$5% :  . & (&4)-=+ ),/0 9  Q)

5 (5-*(<- 60&$5% :   & (&:)-%% ),/0 9  —)

5 (5'67- &$5%21 :   & (&$90*% (/(&7 9  —)

5 (5-*(<- 60&$5% :   & (&.&+- &(5$0,& 9 S)

5 (5-*(<- 60&$5% :   & (&$90*% (/(&7 9  —)

5 (5-*(<- 60&$5% :   & (&$&0% (/(&7 9  —)

5 (5-*(<- 60&$5% :   & (&-<%+. (/(&7 9  Q)

5 (5'67- &$5%21 :   & (&-9%+. (/(&7 9  Q)

5 (5-*(<- 60&$5% :  . & (&40+- ),/0 9 Q)

5 (5-*(<5 60&$5% :   & (&40+- ),/0 9 Q)

5 (5-*(<5 60&$5% :   & (&89+-&; 60&$3 9 Q)

5 (5-*(<5 60&$5% :   & (&$+0*% (/(&7 9 —)

5 (5-*(<- 60&$5% :  . & (&$+05*% (/(&7 9 —)

5 (5'67- &$5%21 :   & (&-<%+. (/(&7 9  Q)

5 (5-*(<5 60&$5% :   & (&-9%+. (/(&7 9  —)

5 (5-*(<5 60&$5% :   & (&-9%+. (/(&7 9  Q)

5 (5-*(<- 60&$5% :   & (&-9%+. (/(&7 9  Q)

5 (5-*(<- 60&$5% :   & (&40+- ),/0 9 Q)

5 (5-*(<5 60&$5% :   & (&40+- ),/0 9 Q)

&$3$&,7256 & (&$&0*% (/(&7 9 —)

& (&89+*&* 60&$3 9  S)


& (&$&0*% (/(&7 9 —)
& (&-9)+= (/(&7 9  Q)
& (&-9)+= (/(&7 9  Q)
& (&89+-&; 60&$3 9 S)
& (&-9)+= (/(&7 9  Q)
& (&89+*&* 60&$3 9  S)
& (&$+0*% (/(&7 9 —)
& (&4%+. ),/0 9 Q)
& (&$+0% (/(&7 9 —)
& (&4%+. ),/0 9 Q)
& (&$+0*% (/(&7 9 —)
& (&4%+. ),/0 9 Q)
& (&89+'&; 60&$3 9 S)
& (&-<%+. (/(&7 9  Q)
& (&89+'&; 60&$3 9 S)
& (&-<%+. (/(&7 9  Q)
& (&-9%+. (/(&7 9  —)
& (&-<%+. (/(&7 9  Q)
& (&-9%+. (/(&7 9  —)
& (&-9)+= (/(&7 9  Q)
& (&$+0*% (/(&7 9 —)
& (&$+0*% (/(&7 9 —)
& (&-9%+. (/(&7 9  —)
& (&$+0*% (/(&7 9 —)
& (&.&+-% &(5$0,& 9 Q)
& (&-9)+= (/(&7 9  Q)
& (&40+- ),/0 9  Q)
& (&$+0*% (/(&7 9 —)
& (&$&0*% (/(&7 9 —)
& (&-9)+= (/(&7 9  Q)
& (&-9%+. (/(&7 9  —)
& (&$&0% (/(&7 9  —)
& (&$&+*% (/(&7 9 —)
& (&$+0*% (/(&7 9 —)
& (&$+0*% (/(&7 9 —)
& (&$+0*% (/(&7 9 —)
& (&40+- ),/0 9  Q)
& (&$+0*% (/(&7 9 —)
& (&$90*% (/(&7 9 Q)
& (&$+05*% (/(&7 9 —)
& (&$90*% (/(&7 9 Q)
& (&$+0*% (/(&7 9 —)
& (&$+05*% (/(&7 9 —)
& (&-9%+. (/(&7 9  —)
& (&$+0*% (/(&7 9 —)
& (&.:1$0(& &(5$0,& 9  Q)
& (&$++*( (/(&7 9  —)
& (&.:1$0(& &(5$0,& 9  —)
& (&$+05*% (/(&7 9 —)
& (&4($0:% ),/0 9 Q)
& (&$+0*% (/(&7 9 —)
& (&.&+- &(5$0,& 9 Q)
& (&-<%+. (/(&7 9  Q)
& (&.&+- &(5$0,& 9 Q)
& (&-<%+. (/(&7 9  Q)
& (&.&+- &(5$0,& 9 Q)
& (&-<%+. (/(&7 9  Q)
& (&26*$%% (/(&7 9  —)
& (&$(0% (/(&7 9  Q)
& (&$++*% (/(&7 9 —)
& (&.&+- &(5$0,& 9  Q)
& (&.&+- &(5$0,& 9  S)
& (&$(0% (/(&7 9  —)
& (&.&$- &(5$0,& .9  S)
& (&$&0*% (/(&7 9 —)
& (&.&'-% &(5$0,& .9  S)
& (&89+&&; 60&$3 9  S)
& (&.&'- &(5$0,& .9 Q)
& (&$++*% (/(&7 9 —)
& (&$&+*( (/(&7 9  —)
& (&40+- ),/0 9  Q)
& (&.&+- &(5$0,& 9 Q)
& (&$+05*% (/(&7 9 —)
& (&4%+. ),/0 9 Q)
& (&($+8 (/(&7 9 —)
& (&$&0*% (/(&7 9 —)
& ((8)&+% (/(&7 9  —)
& (&.&+- &(5$0,& 9 S)
& (&40.=: ),/0 9  Q)
& (&-9)+= (/(&7 9  Q)
& (&89+-&; 60&$3 9 Q)
& (&$90*% (/(&7 9  —)
& (&$(0% (/(&7 9  —)
& (&$&0*% (/(&7 9 —)
& (&$90*% (/(&7 9  —)
& (&-9)+= (/(&7 9  Q)
& (&.&+- &(5$0,& 9 S)
& (&$++*( (/(&7 9  —)
& (&.&+- &(5$0,& 9 S)


&FW5HI 3DUWV1XPEHU 'HVFULSWLRQ &FW5HI 3DUWV1XPEHU 'HVFULSWLRQ

& (&$9+*% (/(&7 9  S) 6 (945 6:,7&+

& (&-9)+= (/(&7 9  Q) 6 (945 6:,7&+

& (&$&0*% (/(&7 9 —) 6 (945 6:,7&+

& (&89+-&; 60&$3 9 S) 6 (945 6:,7&+

& (&$+0*% (/(&7 9 —) 6 (945 6:,7&+

& (&-9)+= (/(&7 9  Q)

& (&$+0*% (/(&7 9 —) ',))(5(1&(6)2502'(/ 7;&.3


& (&89+-&; 60&$3 9 S)

& (&89+-&; 60&$3 9 S)


0(&+$1,&$/3$576
& (&$&0*% (/(&7 9 —)
 =78=$($ $12'(/($'
& (&40+- ),/0 9 Q)
 7.8( %$&.&29(5
& (&$+0*% (/(&7 9 —)
 $((5; &57
& (&$+0*% (/(&7 9 —)
 7.<( &$%,1(7
& (&-9)&= (/(&7 9  Q)
 93 &57),;,1*6&5(:
& (&$+0*% (/(&7 9 —)
 7/.( '(*$866&2,/
& (&-9%+. (/(&7 9  —)
 713(($3 (3&%
& (&-9%+. (/(&7 9  —)
 =7)0$ )%7
& (&$+0*% (/(&7 9 —)
 7;$-7)%$* )2&86/($'$66<
& (&-9)+= (/(&7 9  Q)
 7%0( 02'(//$%(/
& (&89+-&; 60&$3 9 Q)
 713(<$) <3&%
& (&89+-&; 60&$3 9 Q)

& (&89+-&; 60&$3 9 Q) 0,6&(//$1(286&20321(176

& (&89+&&; 60&$3 9 S)  73&( 287(5&$5721

& (&89+&&; 60&$3 9 S)  73'( 723&86+,21

& (&89+-&; 60&$3 9 S)  73'( %27720&86+,21

& (&89+'7; 60&$3 9 S) 02(  ),;&/,3

& (&89+*&* 60&$3 9  S) ,&V


& (&89+-&; 60&$3 9 S)
,& 7'$4 5*%287387
& (&-9)+= (/(&7 9  Q)
,& /$ 9(57,&$/287387
& (&-9)+= (/(&7 9  Q)
,& 7'$96 82&
& (&$&0*% (/(&7 9 —)
,& 6(1/) (5525,&
& (&$+0*% (/(&7 9 —)
,& ;3.$3 ((520
& (&40+- ),/0 9 Q)
',2'(6
& (&40+- ),/0 9 Q)

' 0$7$ ',2'(


& (&89+-&; 60&$3 9 S)

' 65$7 ',2'(


& (&89+-&; 60&$3 9 S)

' (8 ',2'(


& (&-9)+= (/(&7 9  Q)

' (8 ',2'(


& (&$+05*% (/(&7 9 —)

' 7965+)9 ',2'(


& (&$&0*% (/(&7 9 —)

' 58$0/)$ ',2'(


& (&$+0*% (/(&7 9 —)

' 65$7 ',2'(


& (&$&0*% (/(&7 9 —)

' 7% ',2'(


& (&$&0*% (/(&7 9 —)

' 07=-7' ',2'(


& (&89+-&; 60&$3 9 Q)

' 58/)$ ',2'(


& (&89+-&; 60&$3 9 Q)

' 07=-7$ ',2'(


& (&-9)+= (/(&7 9  Q)

& (&89+-&; 60&$3 9 S) 75$16,67256

& (&-9%+. (/(&7 9  —) 4 %8')5% 75$16,6725

& (&-9)+= (/(&7 9  Q) 4 %&% 75$16,6725

& (&$+0*% (/(&7 9 —)


75$16)250(56
& (&89+'&; 60&$3 9 S)
7 (76.'%$& 75$16)25(5
& (&89+'&; 60&$3 9 S)
&2,/6
& (&$+0*% (/(&7 9 —)

& (&-9)+= (/(&7 9  Q) / (/+/ &2,/

& (&89+.%; 60&$3 9 Q) / (/&'( &2,/

& (&89+.%; 60&$3 9 Q) 5(6,67256

& (&89+.%; 60&$3 9 Q)


5 (5'67- &$5%21 :  

& (&89+.%; 60&$3 9 Q)


5 (52&.)5 5(6,6725 :  5

& (&89+.%; 60&$3 9 Q)


5 (52&.)5 5(6,6725 :  5

& (&89+.%; 60&$3 9 Q)


5 (52&.)5 5(6,6725 :  5

& (&89+.%; 60&$3 9 S)


5 (5-*(<- 60&$5% :  .

& (&89+.%; 60&$3 9 S)


5 (5-*(<- 60&$5% :  .

7(50,1$/6$1'/,1.6 5 (5'7- &$5%21 :  .

-. 7-% 5&$+($'3+21(-$&. 5 (5'7- &$5%21 :  .

-. 7-%( 6&$5762&.(7 5 (54&-35 5(6,6725 :  5

5 (5-(1) 60&$5% :  


6:,7&+(6
5 (5'67- 5(6,6725 :  .
6 (6%6% 6:,7&+


&FW5HI 3DUWV1XPEHU 'HVFULSWLRQ &FW5HI 3DUWV1XPEHU 'HVFULSWLRQ

5 (5'7- &$5%21 :  . ' 07=-7$ ',2'(

5 (5:3.5 :281' :  5 75$16,67256

5 (5'67- &$5%21 :  .


4 %&% 75$16,6725
5 (5-*(<- 60&$5% :  .
4 %8$)5% 75$16,6725
5 (5-*(<- 60&$5% :  .
4 %&% 75$16,6725
5 (5-*(<- 60&$5% :  .
4 %&% 75$16,6725

&$3$&,7256
4 %&% 75$16,6725

& (&($&156% (/(&7 9  —) 4 %&% 75$16,6725

& (&:+-9% ),/0   —) 4 6./% 75$16,6725

& (&.&'- &(5$0,& .9  Q) 4 %&% 75$16,6725

& (&.&+- &(5$0,& 9 Q) 75$16)250(56

& (&$(05*% (/(&7 9  —)


7 $ 75$16)25(5
& (&-<%+. (/(&7 9  Q)
&2,/6
& (&89+-&; 60&$3 9 S)
- (;&(/6$7 &2,/

',))(5(1&(6)2502'(/ 7;&.3 / (/+/ &2,/

/ (/&'( &2,/

/ (/&%/ &2,/

0(&+$1,&$/3$576
/ (/&'( &2,/

 =78=$($ $12'(/($' 5(6,67256

 7.8( %$&.&29(5


-6( (5-*(<5 60&$5% :  
 $(&); &57
-<$. (5-*(<5 60&$5% :  
 7.<( &$%,1(7
5 (5*6-6 0(7$/ :  
 93 &57),;,1*6&5(:
5 (5-*(<- 60&$5% :  .
 7/.( '(*$866&2,/
5 (5-*(<- 60&$5% :  
 713(($< (3&%
5 (5'67- &$5%21 :  
 =7)/$ )%7
5 (5'67- &$5%21 :  
 7;)-7)%;** )2&86/($'$66<
5 (5'67-5 &$5%21 :  5
 7%0( 02'(//$%(/
5 (5'67-5 &$5%21 :  5
 713(<$* <3&%
5 (5'67-5 &$5%21 :  5

0,6&(//$1(286&20321(176
5 (5*6- 0(7$/ :  .

  ),;&/,3 5 (5'7- &$5%21 :  .

 73&( 287(5&$5721 5 (54$%-356 5(6,6725 :  

 73'( 723&86+,21 5 (54$- )86,%/( :  

 73'( %27720&86+,21 5 (5'79 5(6,6725 :  

'  7+(50,6725 5 (5-*(<- 60&$5% :  .

6 7-6& &5762&.(7 5 (5'67- 5(6,6725 :  .

,&V 5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :  .


,& /$1 9(57,&$/287387
5 (5-*(<- 60&$5% :  .
,& 7'$96 82&
5 (5-*(<- 60&$5% :  .
,& 7($$ (:&255(&7,21
5 (5-*(<- 60&$5% :  .
,& $1/ 95(*8/$725
5 (5'67- &$5%21 :  
,& 6(1/) (5525$0/,),(5
5 (5-*(<- 60&$5% :  .
,& ;3.%3 ((520
5 (5-*(<- 60&$5% :  .
',2'(6
5 (5-*(<- 60&$5% :  .
' 07=-7& ',2'(
5 (5-*(<- 60&$5% :  .
' (8 ',2'(
5 (5-*(<- 60&$5% :  .
' 79658$0/)% ',2'(
5 (5-*(<- 60&$5% :  .
' 79658$0/)% ',2'(
5 (5-*(<- 60&$5% :  
' (5'/ ',2'(
5 (5*6- 0(7$/ :  
' 58/)$ ',2'(
5 (5-*(<- 60&$5% :  
' (8 ',2'(
5 (5-*(<- 60&$5% :  .
' %='& ',2'(
5 (5-*(<- 60&$5% :  .
' 7/3*5/) 3+272&283/(5
5 (5-*(<- 60&$5% :  .
' 0$7$ ',2'(
5 (5-*(<- 60&$5% :  .
' 0$7$ ',2'(
5 (5-*(<- 60&$5% :  .
' 07=-7& ',2'(
5 (5-*(<- 60&$5% :  .
' 0$7$ ',2'(
5 (5'67- &$5%21 :  .
' 0$07$ ',2'(
5 (5-*(<- 60&$5% :  
' 0$ ',2'(
5 (5-*(<- 60&$5% :  .
' $89 ',2'(
5 (54+-5 )86,%/( :  5
' 07=-7' ',2'(
5 (5-*(<- 60&$5% :  
' 07=-7' ',2'(
5 (5*6- 5(6,6725 :  .
' 0$7$ ',2'(
5 (5-*(<- 60&$5% :  .
' 79658$0/)$ ',2'(
5 (5*)-+ 5(6,6725 :  


&FW5HI 3DUWV1XPEHU 'HVFULSWLRQ &FW5HI 3DUWV1XPEHU 'HVFULSWLRQ

5 (5:3.5 :281' :  5 ,& 6(1/) (5525$0/,),(5

5 (5'67- &$5%21 :  . ,& ;3.&3 ((520

5 (5-*(<- 60&$5% :  . ',2'(6

5 (5-*(<- 60&$5% :  .


' 07=-7& ',2'(
5 (5-*(<- 60&$5% :  .
' (8 ',2'(

&$3$&,7256
' 79658$0/)% ',2'(

& (&-9)+= (/(&7 9  Q) ' 79658$0/)% ',2'(

& (&89+=); 60&$3 9  Q) ' (5'/ ',2'(

& (&.&'- &(5$0,& .9 Q) ' 58/)$ ',2'(

& (&89+.%; 60&$3 9 S) ' (8 ',2'(

& (&89+-&; 60&$3 9 S) ' %='& ',2'(

& (&$&05% (/(&7 9  —) ' 7/3*5/) 3+272&283/(5

& (&:+-9% ),/0 9  Q) ' 0$7$ ',2'(

& (&$*+*5% (/(&7 9  Q) ' 0$7$ ',2'(

& (&.&'- &(5$0,& .9  S) ' 07=-7& ',2'(

& (&.&+- &(5$0,& 9  Q) ' 0$7$ ',2'(

& (&-<%+. (/(&7 9  Q) ' 0$07$ ',2'(

& (&89+-&; 60&$3 9 S) ' 0$ ',2'(

& (&89+-&; 60&$3 9 S) ' $89 ',2'(

& (&89+-&; 60&$3 9 S) ' 07=-7' ',2'(

& (&-<%+. 60&$3 9  Q) ' 07=-7' ',2'(

& (&$+0*% (/(&7 9 —) ' 0$7$ ',2'(

& (&-9)+= (/(&7 9  Q) ' 79658$0/)$ ',2'(

& (&$++*% (/(&7 9  —) ' 07=-7$ ',2'(

& (&4%+- ),/0 9 Q) 75$16,67256

& (&4%+. ),/0 9 Q)


4 %&% 75$16,6725
& (&43*= ),/0 9  Q)
4 %8$)5% 75$16,6725
& (&43-= ),/0 9  Q)
4 %&% 75$16,6725
& (&$+0*% (/(&7 9 —)
4 %&% 75$16,6725
& (&:)-%% ),/0 9  Q)
4 %&% 75$16,6725
& (&-9)+= (/(&7 9  Q)
4 %&% 75$16,6725
& (&-9)+= (/(&7 9  Q)
4 6./% 75$16,6725
& (&$-0% (/(&7 9  —)
4 %&% 75$16,6725

75$16)250(56
',))(5(1&(6)2502'(/ 7;&.3
7 $ 75$16)25(5

&2,/6
0(&+$1,&$/3$576
- (;&(/6$7 &2,/
 =78=$($ $12'(/($'
/ (/+/ &2,/
 7.8( %$&.&29(5
/ (/&'( &2,/
 $(&); &57
/ (/&%/ &2,/
 7.<( &$%,1(7
/ (/&'( &2,/
 93 &57),;,1*6&5(:
5(6,67256
 7/.( '(*$866&2,/
-6( (5-*(<5 60&$5% :  
 713((%% (3&%
-<$. (5-*(<5 60&$5% :  
 =7)/$ )%7
5 (5*6-6 0(7$/ :  
 7;)-7)%;** )2&86/($'$66<
5 (5-*(<- 60&$5% :  .
 7%0( 02'(//$%(/
5 (5-*(<- 60&$5% :  
 713(<$+ <3&%
5 (5'67- &$5%21 :  
0,6&(//$1(286&20321(176
5 (5'67- &$5%21 :  
  ),;&/,3
5 (5'67-5 &$5%21 :  5
 73&( 287(5&$5721
5 (5'67-5 &$5%21 :  5
 73'( 723&86+21
5 (5'67-5 &$5%21 :  5
 73'( %27720&6+,21
5 (5*6- 0(7$/ :  .
'  7+(50,6725
5 (5'7- &$5%21 :  .
6 7-6& &5762&.(7
5 (54$%-356 5(6,6725 :  

,16758&7,21%22.6
5 (54$- )86,%/( :  

 74%(01 23(5$7,1*,16758&7,216 5 (5'79 5(6,6725 :  

 74%(34 23(5$7,1*,16758&7,216 5 (5-*(<- 60&$5% :  .

,&V 5 (5'67- 5(6,6725 :  .

5 (5-*(<- 60&$5% :  .


,& 7'$-) 5*%$03/,),(5
5 (5-*(<- 60&$5% :  .
,& /$1 9(57,&$/287387
5 (5-*(<- 60&$5% :  .
,& 7'$96 82&
5 (5-*(<- 60&$5% :  .
,& 7($$ (:&255(&7,21
5 (5-*(<- 60&$5% :  .
,& $1/ 95(*8/$725
5 (5'67- &$5%21 :  


&FW5HI 3DUWV1XPEHU 'HVFULSWLRQ &FW5HI 3DUWV1XPEHU 'HVFULSWLRQ

5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :  

5 (5*6- 0(7$/ :  

5 (5-*(<- 60&$5% :  

5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :  .

5 (5'67- &$5%21 :  .

5 (5-*(<- 60&$5% :  

5 (5-*(<- 60&$5% :  .

5 (54+-5 )86,%/( :  5

5 (5-*(<- 60&$5% :  

5 (5*6- 5(6,6725 :  .

5 (5-*(<- 60&$5% :  .

5 (5*)-+ 5(6,6725 :  

5 (5:3.5 :281' :  5

5 (5'67- &$5%21 :  .

5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :  .

5 (5-*(<- 60&$5% :  .

&$3$&,7256
& (&-9)+= (/(&7 9  Q)

& (&89+=); 60&$3 9  Q)

& (&.&'- &(5$0,& .9 Q)

& (&89+.%; 60&$3 9 S)

& (&89+-&; 60&$3 9 S)

& (&$&05% (/(&7 9  —)

& (&:+-9% ),/0 9  Q)

& (&$*+*5% (/(&7 9  Q)

& (&.&'- &(5$0,& .9  S)

& (&.&+- &(5$0,& 9  Q)

& (&-<%+. (/(&7 9  Q)

& (&89+-&; 60&$3 9 S)

& (&89+-&; 60&$3 9 S)

& (&89+-&; 60&$3 9 S)

& (&-<%+. 60&$3 9  Q)

& (&$+0*% (/(&7 9 —)

& (&-9)+= (/(&7 9  Q)

& (&$++*% (/(&7 9  —)

& (&4%+- ),/0 9 Q)

& (&4%+. ),/0 9 Q)

& (&43*= ),/0 9  Q)

& (&43-= ),/0 9  Q)

& (&$+0*% (/(&7 9 —)

& (&:)-%% ),/0 9  Q)

& (&-9)+= (/(&7 9  Q)

& (&-9)+= (/(&7 9  Q)

& (&$-0% (/(&7 9  —)

& (&89+-&; 60&$3 9 S)


TX-28CK1P, TX-25CK1P, TX-21CK1P

(Z8 CHASSIS)

IMPORTANT SAFETY NOTICE


Components identified by mark have special characteristics
important for safety. When replacing any of these components, use
only manufacturers' specified parts.

NOTE
3. RESISTOR
All resistors are carbon ¼W resistor, unless marked otherwise.
Unit of resistance is OHM (Ω) (k=1,000, M=1,000,000)
4. CAPACITORS
All capacitors are ceramic 50V unless marked otherwise.
Unit of capacitance is µF unless otherwise stated.
5. COIL
Unit of inductance is µH, unless otherwise stated.

6. TEST POINT
Test Point Position

7. EARTH SYMBOL

Chassis Earth (Cold)

Line Earth (Hot)

8. VOLTAGE MEASUREMENT
Voltage is measured by a d.c. voltmeter.
Measurement conditions are as follows:
Power source a.c. 220V-240V, 50Hz
Receiving Signal Colour Bar signal (RF)
All customer controls Maximum position

9.

Indicates the Video signal path

Indicates the Audio signal path

These schematic diagrams are the latest at time of printing and are subject to change without notice.

REMARKS
a. Do not touch the hot part, or the hot and cold parts at the same time, as you are liable to a shock hazard.
b. Do not short circuit the hot and cold circuits as electrical components may be damaged.
c. Do not connect an instrument, such as an oscilloscope, to the hot and cold circuits simultaneously as this may cause
fuse failure. Connect the earth of the instruments to the earth connection of the circuit being measured.
d. Make sure to disconnect the power plug before removing the chassis.

NOTE
1. The Power Supply Circuit contains a circuit area, which uses a separate power supply to isolate the earth connection.
The circuit is defined by HOT and COLD indications in the schematic diagram. All circuits, except the Power Circuit, are
COLD.

20

Anda mungkin juga menyukai