BRANCHES
www.aalco.co.uk
0271 Aalco Stock list Cover 04 13/9/04 1:47 pm Page 1
Grades: EN 1.4432 (316L High Molybdenum) ● EN 1.4307 (304L) ● EN 1.4571 (316 Titanium/316Ti)
Standard
Weight per metre (kg) for given Wall Thickness in mm
Stock Range DN
100
OD
106
2.5mm 3.0mm
7.737
4.0mm 5.0mm METRIC
100 108 10.417
WELDED TUBE
150 156 11.493
The following illustrate a WEIGHTS
150 158 15.425
All weights shown in this publication are for 200 205 12.677
range of product information guidance only. They are calculated using nominal
200 206 15.249
dimensions and scientifically recognised densities.
available from Aalco – Please note that in practice, the actual weight
200
250
208
255 15.807
20.433
can vary significantly from the theoretical weight
Note
Tube above DN600 may be supplied with two or more longitudinal welds
ngs Brochure
Metric Tube & Fitti
ybuilding Manual
Road Transport Bod
Treadplate Brochure
CONTENTS
BRASS PAGE 14 - 19
BRONZE PAGE 20 - 21
COPPER PAGE 22 - 25
3
0271 Aalco Stock List 04 20/9/04 11:48 am Page 2
1
⁄4 0.09 25⁄8 9.46
5
⁄16 0.13 23⁄4 10.4
3
⁄8 0.19 3 12.4
ROUND 7
⁄16 0.26 31⁄4 14.5
BAR 1
⁄2 0.34 31⁄2 16.8
9
⁄16 0.43 33⁄4 19.3
5
⁄8 0.54 4 22.0
16mm 0.54 41⁄4 24.8
11
⁄16 0.65 41⁄2 27.8
3
⁄4 0.77 43⁄4 31.0
20mm 0.85 5 34.3
13
⁄16 0.91 51⁄4 37.8
7
⁄8 1.05 51⁄2 41.5
1 1.37 53⁄4 45.4
11⁄8 1.74 6 49.4
11⁄4 2.15 61⁄2 58.0
15⁄16 2.37 7 67.3
13⁄8 2.60 71⁄4 72.2
35mm 2.61 71⁄2 77.2
17⁄16 2.84 8 87.9
11⁄2 3.09 81⁄2 99.2
15⁄8 3.63 9 111
13⁄4 4.21 91⁄2 124
17⁄8 4.83 10 137
2 5.49 12 198
21⁄8 6.20 13 232
21⁄4 6.95 14 269
23⁄8 7.75 15 309
21⁄2 8.58 16 352
MACHINING
We stock aluminium round bar in three machining alloys:
Alloy 6082 T6 Machines well and, with chip breakers, produces swarf in short tight coils.
Alloy 2011 T3/T6 Often referred to as ‘FMA’ (Free Machining Alloy), this is produced especially for use on
automatic lathes. It offers exceptional machinability at high speeds and forms fine chips which are easily
removed. It is particularly suitable for components with complex, detailed or extensive machining and can
often replace ‘free machining brass’ without tool changes.
Alloy 6262 T9 This may be used in place of Alloy 2011 in applications requiring higher corrosion resistance
and better anodising response. It has excellent machinability and surface finishing characteristics.
4 ALUMINIUM EXTRUSIONS
0271 Aalco Stock List 04 20/9/04 11:48 am Page 3
3
⁄8 x 1⁄4 0.16 13⁄4 x 3⁄4 2.29
1
⁄2 x 1⁄8 0.11 13⁄4 x 1 3.06
1
⁄2 x 3⁄16 0.16 13⁄4 x 11⁄4 3.82
1
⁄2 x 1⁄4 0.22 2 x 1⁄8 0.44 FLAT BAR
1
⁄2 x 3⁄8 0.33 2 x 3⁄16 0.66
5
⁄8 x 1⁄8 0.14 2 x 1⁄4 0.87 Alloy 6082-T6 or
5
⁄8 x 3⁄16 0.20 2 x 3⁄8 1.31 6063-T6/6063A-T6
5
⁄8 x 1⁄4 0.27 2 x 1⁄2 1.75
5
⁄8 x 3⁄8 0.41 2 x 5⁄8 2.19
5
⁄8 x 1⁄2 0.55 2 x 3⁄4 2.62
3
⁄4 x 1⁄16 0.08 2x1 3.50
3
⁄4 x 1⁄8 0.16 2 x 11⁄4 4.37
3
⁄4 x 3⁄16 0.25 2 x 11⁄2 5.25
3
⁄4 x 1⁄4 0.33 21⁄2 x 3⁄16 0.82
3
⁄4 x 3⁄8 0.49 21⁄2 x 1⁄4 1.09
3
⁄4 x 1⁄2 0.66 21⁄2 x 3⁄8 1.64
3
⁄4 x 5⁄8 0.82 21⁄2 x 1⁄2 2.19
7
⁄8 x 1⁄8 0.19 21⁄2 x 3⁄4 3.28
1 x 1⁄16 0.11 21⁄2 x 1 4.37
1 x 1⁄8 0.22 21⁄2 x 11⁄2 6.56
1 x 3⁄16 0.33 21⁄2 x 2 8.74
1 x 1⁄4 0.44 3 x 1⁄8 0.66
1 x 5⁄16 0.54 3 x 3⁄16 0.98
1 x 3⁄8 0.66 3 x 1⁄4 1.31
1 x 1⁄2 0.87 3 x 3⁄8 1.97
1 x 5⁄8 1.09 3 x 1⁄2 2.62
1 x 3⁄4 1.31 3 x 5⁄8 3.28
11⁄4 x 1⁄8 0.27 3x1 5.25
11⁄4 x 3⁄16 0.41 3x2 10.50
11⁄4 x 1⁄4 0.55 31⁄2 x 1⁄4 1.52
11⁄4 x 3⁄8 0.82 31⁄2 x 1⁄2 3.04
11⁄4 x 1⁄2 1.09 4 x 1⁄8 0.87
11⁄4 x 5⁄8 1.37 4 x 3⁄16 1.30
11⁄4 x 3⁄4 1.64 4 x 1⁄4 1.75
11⁄4 x 1 2.19 4 x 3⁄8 2.62
11⁄2 x 1⁄8 0.33 4 x 1⁄2 3.50
11⁄2 x 3⁄16 0.49 4 x 5⁄8 4.37
11⁄2 x 1⁄4 0.66 4 x 3⁄4 5.25
11⁄2 x 3⁄8 0.98 4x1 6.99
11⁄2 x 1⁄2 1.31 4 x 11⁄4 8.74
11⁄2 x 5⁄8 1.64 4x2 14.00
11⁄2 x 3⁄4 1.97 5 x 1⁄4 2.19
11⁄2 x 1 2.62 5 x 1⁄2 4.37
11⁄2 x 11⁄4 3.28 6 x 1⁄4 2.62
13⁄4 x 1⁄4 0.76 6 x 3⁄8 3.93
13⁄4 x 3⁄8 1.15 6 x 1⁄2 5.25
13⁄4 x 1⁄2 1.53 6x1 10.50
ALUMINIUM EXTRUSIONS 5
0271 Aalco Stock List 04 20/9/04 11:48 am Page 4
1
⁄4 0.11 11⁄4 2.73
5
⁄16 0.17 11⁄2 3.93
3
⁄8 0.25 13⁄4 5.35
SQUARE 1
⁄2 0.44 2 6.99
BAR 5
⁄8 0.68 21⁄2 10.90
Alloy 6082-T6
3
⁄4 0.98 3 15.70
7
⁄8 1.34 31⁄2 21.40
1 1.75 4 28.00
1
⁄2 x 1⁄2 x 16 swg 0.20 13⁄4 x 13⁄4 x10 swg 1.45
3
⁄4 x 3⁄4 x 16 swg 0.31 2 x 2 x16 swg 0.87
1 x 1 x 16 swg 0.42 2 x 2 x 10 swg 1.68
BOX SECTION 1 x 1 x 10 swg 0.78 2 x 2 x 1⁄4 3.06
SQUARE 11⁄4 x 11⁄4 x16 swg 0.53 21⁄2 x 21⁄2 x10 swg 2.12
11⁄4 x 11⁄4 x10 swg 1.00 3 x 3 x10 swg 2.57
Alloy 6063-T6 or
11⁄2 x 11⁄2 x16 swg 0.64 4 x 4 x10 swg 3.47
6082-T6
11⁄2 x 11⁄2 x10 swg 1.23 4 x 4 x 1⁄4 6.56
Size Weight
(in) per metre (Kg)
1 x 1⁄8 0.22
11⁄2 x 1⁄8 0.33
FEATHER EDGE
MOULDING
Alloy 6063-T6
6 ALUMINIUM EXTRUSIONS
0271 Aalco Stock List 04 20/9/04 11:48 am Page 5
3
⁄8 o/d x 16 swg 0.11 13⁄4 o/d x 16 swg 0.59
1
⁄2 o/d x 18 swg 0.12 13⁄4 o/d x 10 swg 1.14
1
⁄2 o/d x 16 swg 0.15 17⁄8 o/d x 10 swg 1.23
1
⁄2 o/d x 10 swg 0.26 2 o/d x 16 swg 0.68 TUBE
5
⁄8 o/d x 18 swg 0.15 2 o/d x 10 swg 1.32 Available in one
5
⁄8 o/d x 16 swg 0.20 2 o/d x 3⁄16 1.86 or more of the
5
⁄8 o/d x 10 swg 0.35 2 o/d x 1⁄4 2.39 following alloys
3
⁄4 o/d x 18 swg 0.19 21⁄4 o/d x 16 swg 0.77
6082-T6
3
⁄4 o/d x 16 swg 0.24 21⁄4 o/d x 10 swg 1.49
3
⁄4 o/d x 10 swg 0.44 21⁄2 o/d x 16 swg 0.86 6063-T6
7
⁄8 o/d x 18 swg 0.22 21⁄2 o/d x 10 swg 1.67 6063A-T6
7
⁄8 o/d x 16 swg 0.29 21⁄2 o/d x 3⁄16 2.38
7
⁄8 o/d x 10 swg 0.53 21⁄2 o/d x 1⁄4 3.08
1 o/d x 18 swg 0.25 21⁄2 o/d x 3⁄8 4.36
1 o/d x 16 swg 0.33 23⁄4 o/d x 10 swg 1.84
1 o/d x 10 swg 0.61 3 o/d x 16 swg 1.03
1 o/d x 3⁄16 0.83 3 o/d x 12 swg 1.65
11⁄8 o/d x 18 swg 0.28 3 o/d x 10 swg 2.02
11⁄8 o/d x 16 swg 0.37 3 o/d x 3⁄16 2.90
11⁄8 o/d x 10 swg 0.70 3 o/d x 1⁄4 3.76
11⁄4 o/d x 18 swg 0.32 31⁄2 o/d x 16 swg 1.21
11⁄4 o/d x 16 swg 0.42 31⁄2 o/d x 10 swg 2.37
11⁄4 o/d x 12 swg 0.65 31⁄2 o/d x 1⁄4 4.46
11⁄4 o/d x 10 swg 0.79 4 o/d x 16 swg 1.38
11⁄4 o/d x 3⁄16 1.08 4 o/d x 12 swg 2.23
13⁄8 o/d x 16 swg 0.46 4 o/d x 10 swg 2.72
13⁄8 o/d x 10 swg 0.88 4 o/d x 1⁄4 5.15
11⁄2 o/d x 18 swg 0.38 41⁄2 o/d x 10 swg 3.07
11⁄2 o/d x 16 swg 0.50 41⁄2 o/d x 1⁄4 5.83
11⁄2 o/d x 10 swg 0.96 5 o/d x 10 swg 3.43
11⁄2 o/d x 3⁄16 1.35 5 o/d x 1⁄4 6.52
11⁄2 o/d x 1⁄4 1.71 51⁄2 o/d x 1⁄4 7.21
15⁄8 o/d x 16 swg 0.55 6 o/d x 10 swg* 4.13
15⁄8 o/d x 10 swg 1.05 6 o/d x 1⁄4 7.90
15⁄8 o/d x 3⁄16 1.48 61⁄2 o/d x 1⁄4 8.58
Size Weight
(in) per metre (Kg) SCAFFOLD
129⁄32 o/d x 7 swg 1.53
TUBE
ALUMINIUM EXTRUSIONS 7
0271 Aalco Stock List 04 20/9/04 11:48 am Page 6
3
⁄8 x 3⁄8 x 1⁄16 0.11 2 x 1⁄2 x 1⁄8 0.60
1
⁄2 x 1⁄2 x 1⁄8 0.27 2 x 3⁄4 x 1⁄8 0.71
5
⁄8 x 5⁄8 x 1⁄16 0.19 2 x 1 x 1⁄8 0.82
CHANNEL 5
⁄8 x 5⁄8 x 1⁄8 0.36 2 x 1 x 3⁄16 1.22
Available in one 3
⁄4 x 1⁄2 x 1⁄8 0.44 2 x 1 x 1⁄4 1.52
or more of the
3
⁄4 x 3⁄4 x 1⁄16 0.24 2 x 11⁄2 x 1⁄8 1.03
following alloys
3
⁄4 x 3⁄4 x 1⁄8 0.49 2 x 11⁄2 x 1⁄4 1.97
7
⁄8 x 7⁄8 x 1⁄8 0.52 2 x 2 x 1⁄8 1.26
6082-T6
1 x 1⁄2 x 1⁄8 0.38 2 x 2 x 3⁄16 1.83
6063-T6 1 x 3⁄4 x 1⁄8 0.49 2 x 2 x 1⁄4 2.40
6063A-T6 1 x 1 x 1⁄16 0.31 21⁄4 x 11⁄4 x 3⁄16 1.43
1 x 1 x 1⁄8 0.60 21⁄2 x 1 x 1⁄8 0.93
1 x 1 x 3⁄16 0.86 21⁄2 x 11⁄4 x 3⁄16 1.52
11⁄8 x 11⁄8 x 1⁄8 0.68 3 x 1 x 1⁄8 1.04
11⁄4 x 1⁄2 x 1⁄8 0.44 3 x 11⁄2 x 1⁄8 1.26
11⁄4 x 3⁄4 x 1⁄8 0.55 3 x 11⁄2 x 3⁄16 1.84
11⁄4 x 1 x 1⁄8 0.66 3 x 11⁄2 x 1⁄4 x 5⁄16 2.66
11⁄4 x 11⁄4 x 1⁄16 0.39 3 x 2 x 1⁄8 1.48
11⁄4 x 11⁄4 x 1⁄8 0.76 3 x 2 x 3⁄16 2.17
11⁄4 x 11⁄4 x 3⁄16 1.10 3 x 2 x 1⁄4 2.84
11⁄2 x 1⁄2 x 1⁄8 0.49 31⁄2 x 11⁄2 x 1⁄4 x 5⁄16 2.90
11⁄2 x 3⁄4 x 1⁄8 0.60 4 x 2 x 1⁄8 1.69
11⁄2 x 1 x 1⁄8 0.71 4 x 2 x 1⁄4 x 5⁄16 3.66
11⁄2 x 11⁄2 x 1⁄16 0.49 5 x 2 x 1⁄4 x 5⁄16 4.24
11⁄2 x 11⁄2 x 1⁄4 1.74 6 x 2 x 1⁄4 x 5⁄16 4.53
13⁄4 x 1 x 1⁄8 0.76 6 x 3 x 1⁄4 x 3⁄8 6.21
13⁄4 x 13⁄4 x 1⁄8 1.09 6 x 3 x 3⁄8 x 1⁄2 8.49
13⁄4 x 13⁄4 x 1⁄4 2.07 8 x 3 x 3⁄8 x 1⁄2 9.80
8 ALUMINIUM EXTRUSIONS
0271 Aalco Stock List 04 20/9/04 11:48 am Page 7
⁄4 x 3⁄4 x 1⁄8
3
0.30 1 x 2 x 1
⁄8 0.63
1 x 1 x 1⁄8 0.41 2 x 2 x 1
⁄8 0.85
11⁄4 x 11⁄4 x 1
⁄8 0.52 2 x 2 x 3
⁄16 1.25
11⁄2 x 11⁄2 x 1
⁄8 0.63 2 x 2 x 1
⁄4 1.64 TEE
11⁄2 x 11⁄2 x 3
⁄16 0.92 3 x 3 x 1
⁄4 2.51 SECTION
11⁄2 x 11⁄2 x 1
⁄4 1.20 Alloy 6082-T6 or
Dimensions are in the order: upright x cross piece x thickness 6063A-T6
1
⁄2 x 1⁄2 x 1⁄16 0.10 11⁄2 x 11⁄2 x 1⁄4 1.20
1
⁄2 x 1⁄2 x 1⁄8 0.19 13⁄4 x 13⁄4 x 1⁄8 0.74
5
⁄8 x 5⁄8 x 1⁄16 0.13 13⁄4 x 13⁄4 x 3⁄16 1.09
5
⁄8 x 5⁄8 x 1⁄8 0.25 13⁄4 x 13⁄4 x 1⁄4 1.42 EQUAL
3
⁄4 x 3⁄4 x 1⁄16 0.16 2 x 2 x 1⁄16 0.43
3
⁄4 x 3⁄4 x 1⁄8 0.30 2 x 2 x 1⁄8 0.85
ANGLE
Available in one
7
⁄8 x 7⁄8 x 1⁄8 0.36 2 x 2 x 3⁄16 1.25
1 x 1 x 1⁄16 0.21 2 x 2 x 1⁄4 1.64 or more of the
1 x 1 x 1⁄8 0.41 2 x 2 x 3⁄8 2.38 following alloys
1 x 1 x 3⁄16 0.59 21⁄2 x 21⁄2 x 1⁄8 1.06 6082-T6
1 x 1 x 1⁄4 0.76 21⁄2 x 21⁄2 x 3⁄16 1.58 6063-T6
11⁄8 x 11⁄8 x 1⁄8 0.46 21⁄2 x 21⁄2 x 1⁄4 2.08
6063A-T6
11⁄4 x 11⁄4 x 1⁄16 0.27 3 x 3 x 1⁄8 1.28
11⁄4 x 11⁄4 x 1⁄8 0.52 3 x 3 x 3⁄16 1.91
11⁄4 x 11⁄4 x 3⁄16 0.76 3 x 3 x 1⁄4 2.51
11⁄4 x 11⁄4 x 1⁄4 0.98 3 x 3 x 3⁄8 3.69
11⁄2 x 11⁄2 x 1⁄16 0.32 4 x 4 x 1⁄4 3.39
11⁄2 x 11⁄2 x 1⁄8 0.63 4 x 4 x 3⁄8 5.00
11⁄2 x 11⁄2 x 3⁄16 0.92 6 x 6 x 1⁄2 10.00
ALUMINIUM EXTRUSIONS 9
0271 Aalco Stock List 04 20/9/04 11:48 am Page 8
⁄4 x 1⁄2 x 1⁄16
3
0.13 2 x 1 x 1⁄4 1.20
⁄4 x 1⁄2 x 1⁄8
3
0.25 2 x 11⁄2 x 1⁄8 0.74
1 x 1⁄2 x 1⁄16 0.15 2 x 11⁄2 x 3⁄16 1.09
UNEQUAL 1 x 1⁄2 x 1⁄8 0.30 2 x 11⁄2 x 1⁄4 1.42
ANGLE 1 x 5⁄8 x 1⁄8 0.33 21⁄2 x 1 x 1⁄8 0.73
Available in one 1 x 3⁄4 x 1⁄16 0.18 21⁄2 x 11⁄2 x 1⁄8 0.85
1 x 3⁄4 x 1⁄8 0.36 21⁄2 x 11⁄2 x 3⁄16 1.25
or more of the
11⁄4 x 1⁄2 x 1⁄8 0.36 21⁄2 x 11⁄2 x 1⁄4 1.64
following alloys 11⁄4 x 3⁄4 x 1⁄8 0.41 3 x 1 x 1⁄8 0.85
6082-T6 11⁄4 x 1 x 1⁄8 0.47 3 x 1 x 1⁄4 1.64
6063-T6 11⁄2 x 1⁄2 x 1⁄8 0.41 3 x 11⁄2 x 1⁄8 0.96
6063A-T6 11⁄2 x 3⁄4 x 1⁄8 0.46 3 x 11⁄2 x 3⁄16 1.40
11⁄2 x 1 x 1⁄8 0.52 3 x 11⁄2 x 1⁄4 1.86
13⁄4 x 3⁄4 x 1⁄8 0.52 3 x 2 x 1⁄8 1.07
13⁄4 x 1 x 1⁄8 0.57 3 x 2 x 3⁄16 1.58
2 x 1⁄2 x 1⁄8 0.52 3 x 2 x 1⁄4 2.08
2 x 3⁄4 x 1⁄8 0.57 4 x 1 x 1⁄8 1.06
2 x 1 x 1⁄8 0.63 4 x 2 x 1⁄4 2.51
2 x 1 x 3⁄16 0.92 4 x 3 x 1⁄4 2.95
6 x 3 x 3⁄8 5.63
10 ALUMINIUM EXTRUSIONS
0271 Aalco Stock List 04 20/9/04 11:48 am Page 9
Size Weight
(mm) per sheet (Kg)
Size Weight
(mm) per sheet (Kg)
SHEET – WHITE
PAINTED
3105-H46/3003-H45
Full White Gloss
Clear Wash Coat
Lacquer Reverse
50-Micron Polycoated
1
⁄8 0.07 1 4.31
3
⁄16 0.15 11⁄16 4.86
5
⁄32 0.10 26mm 4.51
ROD 4mm 0.11 28mm 5.23
CW614N/ 5mm 0.17 11⁄ 8 5.45
CZ121M 7
⁄32 0.21 30mm 6.01
Free Machining Brass 6mm 0.24 13⁄ 16 6.07
3 metre lengths
1
⁄4 0.27 11⁄4 6.73
BSEN 12164 7mm 0.33 15⁄16 7.42
9
⁄32 0.34 13⁄8 8.14
5
⁄16 0.42 35mm 8.18
8mm 0.43 36mm 8.65
11
⁄32 0.51 17⁄16 8.90
9mm 0.54 11⁄2 9.69
3
⁄8 0.61 40mm 10.70
10mm 0.67 15⁄8 11.40
13
⁄32 0.17 13⁄4 13.20
15
⁄32 0.95 17⁄ 8 15.10
7
⁄16 0.82 50mm 16.70
12mm 0.96 2 17.20
1
⁄2 1.08 21⁄ 8 19.40
13mm 1.13 21⁄ 4 21.80
17
⁄32 1.22 60mm 24.00
9
⁄16 1.36 23⁄ 8 24.30
14mm 1.31 21⁄ 2 26.90
15mm 1.50 65mm 28.21
5
⁄8 1.63 25⁄ 8 29.70
16mm 1.71 23⁄ 4 32.60
21
⁄32 1.86 3 38.80
17mm 1.92 31⁄ 4 45.50
11
⁄16 2.04 31⁄ 2 52.80
18mm 2.16 4 68.90
23
⁄32 2.23 41⁄ 4 77.80
3
⁄4 2.42 41⁄ 2 87.20
20mm 2.67 130mm 108.00
13
⁄16 2.84 140mm 129.00
22mm 3.23 155mm 155.00
7
⁄8 3.30 180mm 210.00
*Bars over 3 inches 15
⁄16 3.79 205mm 281.00
in diameter may
vary in length.
29
⁄32 3.53 230mm 353.00
24mm 3.84 255mm 434.00
25mm 4.17
14 BRASS
0271 Aalco Stock List 04 20/9/04 11:48 am Page 13
3
⁄16 0.15 7
⁄16 0.82
5mm 0.17 1
⁄2 1.08
1
⁄4 0.27 5
⁄8 1.68
5
⁄16 0.42 3
⁄4 2.42
ROD
3
⁄8 0.61 7
⁄8 3.30 CW606N/CZ131
10mm 0.66 1 4.31 Riveting Quality Brass
3 metre lengths
BSEN 12164
1
⁄4 0.27 11⁄8 5.45
3
⁄8 0.61 11⁄4 6.73
7
⁄ 16 0.82 13⁄8 8.14
1
⁄2 1.08 11⁄ 2 9.69 ROD
9
⁄ 16 1.32 13⁄4 13.20 CW721R & 722R/
5
⁄8 1.68 2 17.20 CZ114M
11
⁄ 16 1.97 21⁄ 4 21.80 High Tensile Brass/
3
⁄4 2.42 21⁄ 2 26.90 Manganese Bronze
13
⁄ 16 2.75 23⁄4 32.60 3 metre lengths
7
⁄8 3.30 3 38.80 BSEN 12163
1 4.31 4 68.90
1
⁄4 0.27 11⁄2 9.69
3
⁄8 0.61 15⁄8 11.30
1
⁄2 1.08 13⁄4 13.11
5
⁄8 1.67 2 17.20
ROD
3
⁄4 2.42 21⁄ 2 26.90 CW712R/CZ112
7
⁄8 3.28 3 38.80 Naval Brass
1 4.31 4 68.90 3 metre lengths*
11⁄4 6.73 BSEN 12163
0.248 0.29 7
⁄8 3.69
5mm 0.18 0.920 4.02
1
⁄4 0.30 15
⁄16 4.17
HEXAGON 6mm 0.27 24mm 4.24
CW614N/ 7mm 0.36 1 4.75
5
⁄16 0.46 1.010 4.84
CZ121M 8mm 0.47 11⁄ 16 5.36
Free Machining Brass 0.324 0.50 1.100 5.76
3 metre lengths 3
⁄8 0.67 11⁄ 8 6.01
BSEN 12164 10mm 0.74 30mm 6.63
11mm 0.89 1.200 6.84
0.445 0.94 11⁄4 7.42
7
⁄16 0.91 32mm 7.54
12mm 1.06 1.300 8.03
1
⁄2 1.19 15⁄16 8.29
13mm 1.24 13⁄8 8.98
0.525 1.31 36mm 9.54
14mm 1.44 1.480 10.40
9
⁄ 16 1.50 11⁄ 2 10.70
15mm 1.65 15⁄ 8 12.50
0.60 1.71 41mm 12.40
5
⁄8 1.86 1.670 13.20
16mm 1.88 13⁄ 4 14.50
17mm 2.13 1.860 16.40
11
⁄ 16 2.24 46mm 15.60
18mm 2.37 50mm 18.40
0.71 2.39 2.050 19.90
19mm 2.66 2.200 23.00
3
⁄4 2.67 21⁄ 2 29.70
13
⁄ 16 3.14 65mm 31.10
20mm 2.95 23⁄ 4 35.90
0.820 3.19 3 42.70
22mm 3.56
1
⁄2 x 1⁄2 x 1⁄8 0.30 11⁄2 x 11⁄2 x 1⁄ 4 3.77
ANGLE 3
⁄4 x 3⁄4 x 1⁄ 8 0.94 2 x 2 x 1⁄ 8 2.66
CW624N/CZ130 1 x 1 x 1⁄ 8 1.29 2 x 2 x 3⁄ 16 3.99
11⁄4 x 11⁄4 x 1⁄8 1.63 2 x 2 x 1⁄ 4 5.14
12 foot lengths
11⁄2 x 11⁄2 x 1⁄ 8 1.97 21⁄2 x 21⁄2 x 1⁄ 4 6.43
BSEN 12167
11⁄2 x 11⁄2 x 3⁄ 16 2.89 3 x 3 x 1⁄ 4 7.71
16 BRASS
0271 Aalco Stock List 04 20/9/04 11:48 am Page 15
1
⁄8 0.09 1 5.48
3
⁄ 16 0.19 11⁄ 4 8.57
1
⁄4 0.34 11⁄ 2 12.30
5
⁄16 0.54 13⁄ 4 16.80
SQUARE
3
⁄8 0.77 2 21.90 CW614N/
7
⁄16 1.05 21⁄ 4 27.80 CZ121M
1
⁄2 1.37 21⁄ 2 34.00 Free Machining Brass
5
⁄8 2.14 23⁄ 4 41.50 3 metre lengths
3
⁄4 3.08 3 49.40 BSEN 12164
7
⁄8 4.20
3
⁄ 8 o/d x 20 swg 0.21 1 o/d x 10 swg 1.91
3
⁄ 8 o/d x 18 swg 0.27 11⁄4 o/d x 16 swg 1.30
1
⁄ 2 o/d x 20 swg 0.29 11⁄ 2 o/d x 20 swg 0.90
1
⁄ 2 o/d x 18 swg 0.37 11⁄ 2 o/d x 18 swg 1.19 TUBE
1
⁄2 o/d x 16 swg 0.48 11⁄2 o/d x 16 swg 1.57 CW508L/CZ108
5
⁄ 8 o/d x 20 swg 0.37 11⁄2 o/d x 10 swg 3.03 Half Hard
5
⁄8 o/d x 16 swg 0.62 13⁄4 o/d x 16 swg 1.85 5 metre lengths
3
⁄4 o/d x 16 swg 0.75 2 o/d x 20 swg 1.22 BSEN 12449
3
⁄ 4 o/d x 20 swg 0.44 2 o/d x 18 swg 1.60
3
⁄ 4 o/d x 18 swg 0.58 2 o/d x 16 swg 2.12
7
⁄ 8 o/d x 20 swg 0.52 2 o/d x 10 swg 4.13
1 o/d x 20 swg 0.59 21⁄2 o/d x 16 swg 2.67
1 o/d x 18 swg 0.78 3 o/d x 16 swg 3.22
1 o/d x 16 swg 1.03
BRASS 17
0271 Aalco Stock List 04 20/9/04 11:48 am Page 16
3
⁄ 8 x 1⁄ 8 0.26 11⁄ 2 x 5⁄ 8 5.15
3
⁄ 8 x 3⁄ 16 0.38 11⁄ 2 x 3⁄ 4 6.11
FLAT BAR
3
⁄ 8 x 1⁄ 4 0.52 11⁄ 2 x 1 8.23
1
⁄ 2 x 1⁄ 8 0.34 13⁄ 4 x 1⁄ 2 4.75
CW614N/CZ121 1
⁄ 2 x 3⁄ 16 0.50 2 x 1⁄ 8 1.37
Free Machining Brass 1
⁄ 2 x 1⁄ 4 0.69 2 x 3⁄ 16 2.06
12 foot lengths 1
⁄ 2 x 5⁄ 16 0.83 2 x 1⁄ 4 2.74
BSEN 12167 1
⁄ 2 x 3⁄ 8 1.03 2 x 3⁄ 8 4.11
5
⁄ 8 x 1⁄ 8 0.43 2 x 1⁄ 2 5.48
5
⁄ 8 x 1⁄ 4 0.86 2 x 5⁄ 8 6.79
5
⁄ 8 x 3⁄ 8 1.29 2 x 3⁄ 4 8.17
5
⁄ 8 x 1⁄ 2 1.71 2x1 11.00
3
⁄ 4 x 1⁄ 8 0.51 2 x 11⁄ 4 13.75
3
⁄ 4 x 3⁄ 16 0.77 2 x 11⁄ 2 16.30
3
⁄ 4 x 1⁄ 4 1.03 21⁄ 2 x 1⁄ 4 3.43
3
⁄ 4 x 5⁄ 16 1.28 21⁄ 2 x 3⁄ 8 5.08
3
⁄ 4 x 3⁄ 8 1.54 21⁄ 2 x 1⁄ 2 6.86
3
⁄ 4 x 1⁄ 2 2.06 21⁄ 2 x 3⁄ 4 10.02
3
⁄ 4 x 5⁄ 8 2.55 21⁄ 2 x 1 13.60
1 x 1⁄ 8 0.69 21⁄ 2 x 11⁄ 4 17.03
1 x 3⁄ 16 1.03 21⁄ 2 x 11⁄ 2 20.30
1 x 1⁄ 4 1.37 21⁄ 2 x 13⁄ 4 23.73
1 x 5⁄ 16 1.72 3 x 1⁄ 8 2.06
1 x 3⁄ 8 2.06 3 x 1⁄ 4 4.11
1 x 1⁄ 2 2.74 3 x 3⁄ 8 6.17
1 x 5⁄ 8 3.45 3 x 1⁄ 2 8.23
1 x 3⁄ 4 4.11 3x1 16.50
11⁄ 4 x 1⁄ 8 0.85 3 x 11⁄ 2 24.70
11⁄ 4 x 1⁄ 4 1.71 3x2 32.90
11⁄ 4 x 3⁄ 8 2.57 4 x 1⁄ 8 2.74
11⁄ 4 x 1⁄ 2 3.43 4 x 1⁄ 4 5.48
11⁄ 4 x 3⁄ 4 5.14 4 x 3⁄ 8 8.17
11⁄ 4 x 1 6.85 4 x 1⁄ 2 11.00
11⁄ 2 x 1⁄ 8 1.03 4 x 3⁄ 4 16.30
11⁄ 2 x 3⁄ 16 1.54 4x1 21.90
11⁄ 2 x 1⁄ 4 2.06 4 x 11⁄ 2 32.70
11⁄ 2 x 3⁄ 8 3.08 4x2 43.90
11⁄ 2 x 1⁄ 2 4.11
18 BRASS
0271 Aalco Stock List 04 20/9/04 11:48 am Page 17
BRASS 19
0271 Aalco Stock List 04 20/9/04 11:48 am Page 18
5
⁄8 1.50 21⁄ 2 24.10
3
⁄4 2.17 25⁄ 8 26.50
7
⁄8 2.96 23⁄4 29.10
ALUMINIUM 1 3.85 3 34.70
BRONZE 11⁄ 8 4.87 31⁄ 4 40.70
11⁄ 4 6.02 31⁄ 2 47.20
Grade 2 PART 2
13⁄ 8 7.28 33⁄ 4 54.50
NES 833
11⁄ 2 8.66 4 61.60
15⁄ 8 10.20 41⁄ 2 78.00
13⁄ 4 11.80 5 96.30
2 15.40 51⁄ 2 116.00
21⁄ 8 17.40 6 139.00
21⁄ 4 19.50 7 189.00
23⁄ 8 21.70
1
⁄2 1.12 17⁄ 8 15.90
5
⁄8 1.75 2 17.90
3
⁄4 2.52 21⁄ 8 20.40
DRAWN ROD 7
⁄8 3.43 21⁄2 28.00
PB102 1 4.48 23⁄4 33.90
11⁄ 8 5.68 3 40.40
BS 2874
11⁄ 4 7.01 31⁄ 4 47.60
13⁄ 8 8.48 31⁄ 2 54.90
11⁄ 2 10.00 4 71.70
13⁄ 4 13.70
20 BRONZE
0271 Aalco Stock List 04 20/9/04 11:48 am Page 19
1
⁄2 0.96 2 15.40
5
⁄8 1.50 60mm 21.40
20mm 2.39 65mm 25.20
7
⁄8 2.95 70mm 29.20 ROD
1 3.85 3 34.70 CA104
32mm 6.11 31⁄ 2 47.20
Aluminium Bronze
11⁄ 2 8.66 4 61.60
45mm 12.00
BS 2874/BSB 23
BRONZE 21
0271 Aalco Stock List 04 20/9/04 11:48 am Page 20
1
⁄ 2 x 1⁄8 0.36 50mm x 6mm 2.67
1
⁄2 x 3⁄16 0.54 50mm x 8mm 3.57
1
⁄2 x 1⁄4 0.72 50mm x 10mm 4.45
FLAT BAR 5
⁄8 x 1⁄8 0.45 2 x 1⁄ 8 1.44
CW004A/C101 3
⁄4 x 1⁄8 0.54 2 x 3⁄ 16 2.15
Hard Drawn High
3
⁄4 x 3⁄16 0.81 2 x 1⁄ 4 2.87
Conductivity
3
⁄4 x 1⁄4 1.08 2 x 3⁄ 8 4.31
Radius edge 20mm x 5mm 0.89 2 x 1⁄ 2 5.74
4-4.2 metre lengths 20mm x 6mm 1.07 2 x 3⁄ 4 8.61
BSEN 13601 20mm x 10mm 1.78 60mm x 6mm 3.20
25mm x 3mm 0.67 60mm x 10mm 5.34
25mm x 5mm 1.11 21⁄ 2 x 1⁄ 4 5.59
25mm x 6mm 1.34 21⁄ 2 x 3⁄ 8 5.38
25mm x 10mm 2.22 21⁄ 2 x 1⁄ 2 7.18
1 x 1⁄ 8 0.72 3 x 1⁄ 4 4.31
1 x 3⁄ 16 1.08 3 x 3⁄ 8 6.46
1 x 1⁄ 4 1.44 3 x 1⁄ 2 8.61
1 x 1⁄ 2 2.87 80mm x 10mm 7.12
30mm x 3mm 0.80 80mm x 12mm 8.54
30mm x 5mm 1.34 100mm x 6mm 5.34
30mm x 6mm 1.61 100mm x 10mm 8.90
30mm x 10mm 2.67 100mm x 12mm 10.60
11⁄4 x 1⁄ 8 0.90 4 x 1⁄ 4 5.74
11⁄4 x 3⁄ 16 1.35 4 x 3⁄ 8 8.61
11⁄4 x 1⁄ 4 1.79 4 x 1⁄ 2 11.50
11⁄ 2 x 1⁄ 8 1.08 120mm x 6mm 6.42
11⁄ 2 x 1⁄ 4 2.15 120mm x 10mm 10.70
11⁄ 2 x 3⁄ 8 3.23 5 x 1⁄ 4 7.18
11⁄ 2 x 1⁄ 2 4.31 5 x 1⁄ 2 14.30
40mm x 5mm 1.78 150mm x 6mm 8.02
40mm x 6mm 2.14 150mm x 10mm 13.40
40mm x 8mm 2.85 6 x 1⁄ 4 8.61
40mm x 10mm 3.56 6 x 1⁄ 2 17.20
50mm x 3mm 1.34 160mm x 10mm 14.20
50mm x 5mm 2.23 200mm x 10mm 17.80
22 COPPER
0271 Aalco Stock List 04 20/9/04 11:48 am Page 21
COPPER 23
0271 Aalco Stock List 04 20/9/04 11:48 am Page 22
1
⁄4 0.28 11⁄4 7.05
5
⁄16 0.44 13⁄8 8.53
3
⁄8 0.63 11⁄2 10.00
ROUND BAR 10mm 0.70 40mm 11.20
12mm 1.01 15⁄8 11.90
CW004A/C101 1
⁄2 1.13 13⁄4 13.80
Hard Drawn High 5
⁄8 1.76 45mm 14.10
Conductivity 16mm 1.79 50mm 17.40
4-4.2 metre lengths 20mm 2.80 2 18.00
BSEN 13601 3
⁄4 2.54 21⁄4 22.80
7
⁄8 3.45 21⁄2 28.20
25mm 4.39 23⁄4 34.10
1 4.51 3 40.60
11⁄8 5.71 31⁄4 45.30
30mm 6.32 4 72.20
Dia Weight
(in) per metre (Kg)
⁄2
1
1.13
⁄4
3
2.54
1 4.51
ROUND BAR
CW114C/C111
Hard
3-3.2 metre lengths
BSEN 12164
24 COPPER
0271 Aalco Stock List 04 20/9/04 11:48 am Page 23
1
⁄4 o/d x 20 swg 0.14 7
⁄ 8 o/d x 20 swg 0.54
1
⁄4 o/d x 18 swg 0.17 7
⁄ 8 o/d x 16 swg 0.94
3
⁄ 8 o/d x 20 swg 0.22 7
⁄ 8 o/d x 18 swg 0.72
3
⁄ 8 o/d x 18 swg 0.29 1 o/d x 20 swg 0.63 TUBE
1
⁄ 2 o/d x 20 swg 0.30 1 o/d x 18 swg 0.83 CW024A/C106
1
⁄ 2 o/d x 18 swg 0.39 1 o/d x 16 swg 1.08 Half Hard
1
⁄ 2 o/d x 16 swg 0.50 11⁄4 o/d x 16 swg 1.37 6 metre lengths
5
⁄ 8 o/d x 20 swg 0.38 11⁄ 2 o/d x 16 swg 1.66 BSEN 12449
3
⁄4 o/d x 20 swg 0.46 2 o/d x 16 swg 2.24
3
⁄4 o/d x 18 swg 0.61 21⁄ 2 o/d x 16 swg 2.81
3
⁄4 o/d x 16 swg 0.79
COPPER 25
0271 Aalco Stock List 04 20/9/04 11:48 am Page 24
3mm 0.06 9
⁄16” 1.22
1
⁄ 8” 0.06 14mm 1.22
4mm 0.10 15mm 1.40
ROUND 3
⁄16” 0.14 5
⁄8” 1.56
303S31 (1.4305) 5mm 0.16 16mm 1.59
Bright Drawn 1
⁄4” 0.25 11
⁄16” 1.89
6mm 0.22 18mm 2.01
7mm 0.30 3
⁄4” 2.25
5
⁄16” 0.39 20mm 2.48
8mm 0.40 22mm 3.00
3
⁄8” 0.56 7
⁄8” 3.07
10mm 0.62 24mm 3.57
7
⁄16” 0.77 25mm 3.88
12mm 0.89 1” 4.03
1
⁄2” 1.00
7
⁄ 8” 3.09 45mm 12.70
25mm* 3.91 17⁄8”* 14.20
1”* 4.03 50mm 15.60
11⁄8”* 5.11 2”* 16.10 ROUND
30mm* 5.63 21⁄8”* 18.20 316S11/S31
11⁄4”* 6.30 21⁄4”* 20.40 (1.4404)
32mm 6.40 23⁄8”* 22.80 Smooth Turned
13⁄8”* 7.63 60mm* 22.50 *Bright Ground IMA
35mm* 7.66 21⁄2”* 25.20
11⁄2”* 9.08 25⁄8” 27.80
40mm* 10.00 23⁄4”* 30.50
15⁄8”* 10.70 3”* 36.30
13⁄4”* 12.40
20 x 10 1.58 50 x 15 5.93
25 x 10 1.98 60 x 15 7.11
30 x 10 2.37 75 x 15 8.88
40 x 10 3.16 100 x 15 11.90
FLAT
50 x 10 3.95 25 x 20 3.95 304S11/S31 &
60 x 10 4.74 30 x 20 4.74 316S11/S31
75 x 10 5.93 40 x 20 6.32 (1.4307 +1.4404)
100 x 10 7.90 50 x 20 7.90
25 x 12 2.37 60 x 20 9.48
HOT ROLLED
30 x 12 2.84 75 x 20 11.90
40 x 12 3.79 100 x 20 15.80
50 x 12 4.74 30 x 25 5.93
60 x 12 5.69 40 x 25 7.90
75 x 12 7.11 50 x 25 9.88
100 x 12 9.48 60 x 25 11.90
25 x 15 2.96 75 x 25 14.80
30 x 15 3.56 100 x 25 19.80
40 x 15 4.74
12 x 3 0.28 50 x 6 2.37
20 x 3 0.47 60 x 6 2.84
25 x 3 0.59 75 x 6 3.56
FLAT 30 x 3 0.71 100 x 6 4.74
304 & 316L 40 x 3 0.95 25 x 8 1.58
(1.4301 +1.4404) 50 x 3 1.19 30 x 8 1.90
60 x 3 1.42 40 x 8 2.53
ROLLED EDGE 75 x 3 1.78 50 x 8 3.16
100 x 3 2.37 60 x 8 3.79
12 x 5 0.47 75 x 8 4.74
20 x 5 0.79 100 x 8 6.32
25 x 5 0.99 25 x 10 1.98
30 x 5 1.19 30 x 10 2.37
40 x 5 1.58 40 x 10 3.16
45 x 5 1.78 50 x 10 3.95
50 x 5 1.98 60 x 10 4.74
60 x 5 2.37 75 x 10 5.93
75 x 5 2.96 100 x 10 7.90
100 x 5 3.95 25 x 12 2.37
12 x 6 0.57 30 x 12 2.84
20 x 6 0.95 40 x 12 3.79
25 x 6 1.19 50 x 12 4.74
30 x 6 1.42 60 x 12 5.69
40 x 6 1.90 75 x 12 7.11
45 x 6 2.13 100 x 12 9.48
12 x 12 1.14 30 x 30 7.11
16 x 16 2.02 40 x 40 12.60
20 x 20 3.16 50 x 50 19.80
25 x 25 4.94
SQUARE
304S11/S31 &
316S11/S31
(1.4307 +1.4404)
20 x 20 x 3 0.88 50 x 50 x 10 7.11
25 x 25 x 3 1.12 60 x 60 x 5 4.58
25 x 25 x 5 1.78 60 x 60 x 6 5.40
25 x 25 x 6 2.09 60 x 60 x 10 8.69 ANGLE
30 x 30 x 3 1.35 70 x 70 x 6 6.35 304S31 &
30 x 30 x 5 2.17 70 x 70 x 10 10.30 316S11/S31
30 x 30 x 6 2.56 75 x 75 x 6 7.37
(1.4301 +1.4404)
40 x 40 x 3 1.83 75 x 75 x 10 11.95
40 x 40 x 5 2.96 80 x 80 x 6 7.89
40 x 40 x 6 3.51 80 x 80 x 10 12.80
50 x 50 x 3 2.30 100 x 100 x 6 9.20
50 x 50 x 5 3.75 100 x 100 x 10 15.00
50 x 50 x 6 4.46
Size Weight
(ins) per panel (Kg)
5 42.5 35 298.0
6 51.0 40 340.0
8 68.0 45 383.0
QUARTO PLATE
10 85.0 50 426.0 1D Finish
12 102.0 55 468.0 ASTM A240, ASME
15 128.0 60 510.0 SA240: 304, 304L,
16 136.0 65 553.0 316, 316L,
20 170.0 70 596.0 EN10088-2: 1.4301,
22 187.0 75 638.0 1.4307, 1.4401, 1.4404,
25 213.0 90 765.0 BS1501 Pt3: 304S31,
30 255.0 100 850.0 304S11, 316S31, 316S11,
32 272.0 125 1063.0
SEAMLESS BUTT
WELD FITTINGS
ASTM A403, 316L
(in)
WELDED PIPE
ASTM A312,
304L & 316L
WELDED BUTT
WELD FITTINGS
ASTM A403, 304L
WELDED BUTT
WELD FITTINGS
ASTM A403, 316L
FLANGES
ASTM A182,
ANSI B16.5
FLANGES
ASTM A182,
ANSI B16.5
1
⁄2 ✔ ✔ ✔ ✔ ✔ ✔
3
⁄4 ✔ ✔ ✔ ✔ ✔ ✔
1 ✔ ✔ ✔ ✔ ✔ ✔
11⁄4 ✔ ✔ ✔ ✔ ✔ –
11⁄2 ✔ ✔ ✔ ✔ ✔ ✔
2 ✔ ✔ ✔ ✔ ✔ ✔
21⁄2 ✔ ✔ – ✔ ✔ –
3 ✔ ✔ ✔ ✔ ✔ ✔
4 ✔ ✔ ✔ ✔ ✔ ✔
5 ✔ ✔ – ✔ ✔ –
6 ✔ ✔ ✔ ✔ ✔ ✔
8 ✔ ✔ ✔ ✔ ✔ ✔
10 ✔ ✔ ✔ ✔ ✔ ✔
12 ✔ ✔ ✔ ✔ ✔ ✔
14 ✔ ✔ – ✔ ✔ –
16 ✔ ✔ – ✔ ✔ –
18 ✔ ✔ – ✔ ✔ –
20 ✔ ✔ – ✔ ✔ –
24 ✔ ✔ – ✔ ✔ –
48
0271 Aalco Stock List 04 20/9/04 11:48 am Page 47
Type 304L
O/D Wall O/D Wall O/D Wall
(mm) (mm) (mm) (swg) (mm) (swg)
6 1.0 1
/8 25 /8
5
20
8 1.0 3
/16 22 /8
5
18
SEAMLESS TUBE 10 1.0 1
/4 20 5
/8 16
ASTM A269 10 2.0 1
/4 18 3
/4 20
12 1.0 1
/4 16 3
/4 18
15 1.0 5
/16 20 3
/4 16
15 1.5 3
/8 20 7
/8 18
15 2.0 3
/8 18 1 18
18 1.5 3
/8 16 11/4 18
25 1.5 1
/2 18 2 16
50 2.0 1
/2 16
Type 316L
O/D Wall O/D Wall O/D Wall
(mm) (mm) (mm) (mm) (mm) (mm)
6 0.5 14 1.5 25 1.5
6 1.0 14 2.0 25 2.0
6 1.5 15 1.0 25 2.5
8 1.0 15 1.5 25 3.0
8 1.5 15 2.0 30 1.5
10 1.0 16 1.5 30 2.0
10 1.5 16 2.0 30 3.0
10 2.0 18 1.5 38 3.0
12 1.0 20 1.5 38 4.0
12 1.5 20 2.0
12 2.0 22 1.5
SEAMLESS TUBE
ASTM A269
Type 316L
O/D Wall O/D Wall O/D Wall
(in) (swg) (in) (in) (swg) (in) (in) (swg) (in)
1
/8 24 /2
1 1
/8 11/4 18
1
/8 22 /8
5
20 11/4 16
1
/8 20 5
/8 18 11/4 14
3
/16 24 5
/8 16 11/4 /8
1
3
/16 22 5
/8 14 13/8 16
3
/16 20 5
/8 1
/8 11/2 16
3
/16 18 3
/4 20 11/2 14
1
/4 22 3
/4 18 11/2 /4
1
1
/4 20 3
/4 16 11/2 /8
1
1
/4 18 3
/4 14 13/4 16
1
/4 16 3
/4 12 13/4 /8
1
5
/16 22 3
/4 1
/8 2 16
5
/16 20 3
/4 3
/16 2 14
5
/16 18 7
/8 18 2 /8
1
5
/16 16 7
/8 16 2 /4
1
3
/8 22 7
/8 14 21/4 16
3
/8 20 7
/8 1
/8 21/4 10
3
/8 16 1 20 21/4 /4
1
3
/8 14 1 18 21/2 16
3
/8 1
/8 1 16 21/2 /8
1
7
/16 20 1 14 21/2 /4
1
1
/2 22 1 12 3 16
1
/2 20 1 10 3 14
1
/2 18 1 3
/16 3 10
1
/2 16 1 1
/4 3 /4
1
1
/2 14 11/8 16 4 /4
1
3
/4” 16 0.70
1” 16 0.99
11/2” 16 1.51
HYGIENIC TUBE 2” 16 1.88
Welded and annealed 21/2” 16 2.49
Polished, BA and also 3” 16 3.01
descaled 4” 16 4.03
Type 304L and 4” 14 4.98
Type 316L
1” 1.50 0.90
11/2” 1.50 1.38
2” 1.50 1.85
HYGIENIC TUBE 21/2” 1.50 2.34
as welded not 3” 1.50 2.81
annealed, polished 4” 2.00 5.02
and also descaled
Type 304L and
Type 316L
1
⁄2 1.50 0.42 11⁄4 1.50 1.13
5
⁄8 1.20 0.44 13⁄8 1.20 1.02
5
⁄8 1.50 0.54 11⁄2 1.20 1.11
3
⁄4 1.20 0.53 11⁄2 1.50 1.38 ROUND
3
⁄4 1.50 0.66 11⁄2 2.00 1.81 304
7
⁄8 1.20 0.63 13⁄4 1.50 1.62 Welded Mirror
7
⁄8 1.50 0.78 2 1.20 1.49 Polished
7
⁄8 2.00 1.01 2 1.50 1.85
1 1.20 0.73 2 2.00 2.40
1 1.50 0.90 21⁄2 1.50 2.34
1 2.00 1.17 3 1.50 2.81
11⁄8 1.50 1.02 4 3.00 7.41
11⁄4 1.20 0.92
40 x 20 1.50 1.37
RECTANGULAR
430
Welded Dull Polished
Grades: EN 1.4432 (316L High Molybdenum) ● EN 1.4307 (304L) ● EN 1.4571 (316 Titanium/316Ti)
Grades: EN 1.4432 (316L High Molybdenum) ● EN 1.4307 (304L) ● EN 1.4571 (316 Titanium/316Ti)
Standard
Weight per metre (kg) for given Wall Thickness in mm
Stock Range DN
100
OD
106
2.5mm 3.0mm
7.737
4.0mm 5.0mm METRIC
100 108 10.417
WELDED TUBE
150 156 11.493
The following illustrate a WEIGHTS
150 158 15.425
All weights shown in this publication are for 200 205 12.677
range of product information guidance only. They are calculated using nominal
200 206 15.249
dimensions and scientifically recognised densities.
available from Aalco – Please note that in practice, the actual weight
200
250
208
255 15.807
20.433
can vary significantly from the theoretical weight
Note
Tube above DN600 may be supplied with two or more longitudinal welds
ngs Brochure
Metric Tube & Fitti
ybuilding Manual
Road Transport Bod
Treadplate Brochure
BRANCHES
www.aalco.co.uk