OMSCO’s time-tempered, tough products are blacklight magnetic particle inspection and
the drillstring components of choice for toolpush- ultrasonic inspection techniques. Each kelly
ers the world over. It’s been that way since the valve is pressure tested to meet all API specifi-
1930’s. It will be that way in the 21st century! cations and to assure maximum reliability and
Why? long life in the field.
OMSCO’s dedication to quality is further
Our dedication to QUALITY, TECHNOLOGY, demonstrated through our traceability program
AND CUSTOMER SERVICE has made OMSCO for all products.
one of the most respected names in the drilling
industry. Our loyal customers know that OMSCO leads the pack in product and
OMSCO offers drillstring components and acces- manufacturing TECHNOLOGY. In 1947, we
sories unmatched for reliability and performance. introduced the most dependable upper kelly
In today’s “faster, cheaper, deeper” drilling envi- valve ever. Our simple, successful design
ronment, the value of that performance translates established the standard of the industry.
to LOWER COST PER FOOT. Later, OMSCO pioneered a unique trepan-
ning system, ideal for the precision machining
QUALITY is more than just a word at of drill collars and kellys...a system which
OMSCO. Our tubular steel products are remains unsurpassed today! The result?
machined from the highest quality steel available OMSCO drill collar and kelly bores are the
and heat treated in our own custom-designed straightest, most uniform in the industry.
facility, giving us an outstanding quality assur- More recently, OMSCO developed MIR®
ance capability. Our heat treat facility was (Maximum Internal Radius) that dramatically
designed specifically for the treating of oil coun- reduced stress on drill pipe by increasing the
try tubular goods and drillstring components. radius at the junction of the I.D. and the transi-
Nothing exceeds its accuracy, reliability and pre- tion area. Less stress means longer drill pipe
cision. What’s more, this special heat treat capa- life!
bility is augmented by one of the most compre-
hensive in-house metallurgy laboratories in the Finally, unsurpassed CUSTOMER SERVICE
industry. has always been the central part of OMSCO’s
All of OMSCO’s products are manufactured business philosophy. Each employee, whether
under process controls that assure the highest in manufacturing or service after the sale,
degree of accuracy and insure conformance to understands that the most important element of
API specifications as well as established industry our business is you! For quality products, tech-
standards. All welds are processed with state-of- nology excellence, and unsurpassed customer
the-art equipment and are 100% inspected using service, call OMSCO.
2
OMSCO 3/1/00 11:10 PM Page 3
Table of Contents
Drill Pipe........................................................................................ 4
TM
TuffTorq ....................................................................................... 8
Drill Collars.................................................................................... 9
Heavy-Weight Drill Pipe................................................................ 11
Directional-Wate®........................................................................... 13
Kellys.............................................................................................. 15
Kelly Valves.................................................................................... 17
Single Piece Kelly Valves.............................................................. 19
Reverse Flow Check Valves........................................................... 20
Rotary Subs.................................................................................... 21
Pup Joints....................................................................................... 22
Thread Protectors........................................................................... 22
Hardbanding................................................................................... 23
3
OMSCO 3/1/00 11:10 PM Page 4
Drill Pipe
4
OMSCO 3/1/00 11:10 PM Page 5
Compare Omsco’s MIR® with traditional upset radius for stress factors.
A great deal of conversation and specifications pipe. OMSCO’s extensive finite element analysis,
have been devoted to drill pipe “Miu lengths”. Very manufacturing, engineering and product testing have
little attention has been given to the radius at the shown that the larger the radius at the transition, the
junction between the drill pipe I.D. and the transi- lower the stress on the inside diameter of the pipe.
tion area. In fact, it might surprise you to know that this large
OMSCO asks, “Why not have the whole length radius transition lowers the stress in bending of the
of the transition be one continuous radius?” This is outside diameter of the pipe also.
exactly what you get with the new OMSCO MIR® These lower stresses translate into longer pipe
UPSET. life which means lower dollars per foot of hole
Extensive research and development has shown drilled! Isn’t this what we are really after? The
that the length of the Miu, coupled with the OMSCO MIR® UPSET comes standard on all your
Maximum Internal Radius (MIR®) will provide the drill pipe in 4”, 14.00 lbs./ft. and larger sizes.
user with the maximum possible fatigue life for drill
1 OMSCO’s MIR®
2 Standard
The two Finite Element Plots above (5”, 19.50 lb./ft. comparable display of a traditional “long Miu” upset
IEU) dramatically display the stress reduction in the 4-1/2” long with a 1-1/2” radius. The maximum
upset due to the MIR Upset. Figure 1 shows the stress level in this upset I.D. is 39,723 psi. The MIR
geometry and stress levels of the OMSCO 7” long upset wins again by over 20%. (Both models loaded
upset with full radius. The maximum stress level in to give 2-3/8” deflection at 120”. Equivalent to 33
the I.D. of this upset is 33,068 psi. Figure 2 is a degree/100 ft. dogleg.)
3 Endurance Limit Curve
Full Radius
Figures in Thousands
6.65 E-75 EU 7.05 0.280 API NC 26 33/8 13/4 1.625 138,214 313,681 6,250 6,875 b 1.10 4,125 15,599 15,474
6.65 X-95 EU 7.14 0.280 API NC 26 33/8 13/4 1.625 175,072 313,681 7,917 6,875 b 0.87 4,125 19,759 19,600
23/8
6.65 G-105 EU 7.14 0.280 API NC 26 33/8 13/4 1.625 193,500 313,681 8,751 6,875 b 0.79 4,125 21,839 21,663
6.65 S-135 EU 7.14 0.280 API NC 26 33/8 13/4 1.625 248,786 313,681 11,251 6,875 b 0.61 4,125 28,079 27,853
10.40 E-75 EU 10.95 0.362 API NC 31 41/8 21/8 1.963 214,344 447,130 11,554 11,871 p 1.03 7,122 16,509 16,526
10.40 X-95 EU 11.14 0.362 API NC 31 41/8 2 1.875 271,503 495,726 14,635 13,196 p 0.90 7,918 20,911 20,933
27/8 10.40 G-105 EU 11.14 0.362 API NC 31 41/8 2 1.875 300,082 495,726 16,176 13,196 p 0.82 7,918 23,112 23,137
10.40 S-135 IU 10.38 0.362 27/8 PAC 31/8 11/2 1.375 385,820 273,024 20,798 5,732 p 0.28 3,439 29,716 29,747
10.40 S-135 EU 11.63 0.362 API NC 31 43/8 15/8 1.500 385,820 623,844 20,798 16,946 p 0.81 10,167 29,716 29,747
13.30 E-75 EU 14.02 0.368 API NC 38 43/4 211/16 2.457 271,569 587,308 18,551 18,107 p 0.98 10,864 14,113 13,800
13.30 X-95 EU 14.32 0.368 API NC 38 43/4 29/16 2.438 343,988 649,158 23,498 19,174 b 0.82 11,504 17,877 17,480
13.30 X-95 EU 14.71 0.368 API NC 38 5 29/16 2.438 343,988 649,158 23,498 20,326 p 0.86 12,196 17,877 17,480
13.30 G-105 EU 14.81 0.368 API NC 38 5 27/16 2.313 380,197 708,063 25,972 22,213 p 0.86 13,328 19,758 19,320
13.30 S-135 EU 15.02 0.368 API NC 38 5 21/8 2.000 488,825 842,440 33,393 26,515 p 0.79 15,909 25,404 24,840
31/2 15.50 E-75 EU 16.29 0.449 API NC 38 43/4 29/16 2.414 322,775 649,158 21,086 19,174 b 0.91 11,504 16,774 16,838
15.50 E-75 EU 16.68 0.449 API NC 38 5 29/16 2.414 322,775 649,158 21,086 20,326 p 0.96 12,196 16,774 16,838
15.50 X-95 EU 16.65 0.449 API NC 38 47/8 29/16 2.438 408,848 649,158 26,709 20,194 p 0.76 12,116 21,247 21,328
15.50 X-95 EU 16.95 0.449 API NC 38 5 27/16 2.313 408,848 708,063 26,709 22,213 p 0.83 13,328 21,247 21,328
15.50 G-105 EU 17.16 0.449 API NC 38 5 21/8 2.000 451,885 842,440 *29,520 26,515 p 0.90 15,909 23,484 23,573
15.50 S-135 EU 16.46 0.449 API NC 38 43/4 29/16 2.438 580,995 649,158 37,954 19,174 b 0.51 11,504 30,194 30,308
14.00 E-75 IU 15.15 0.330 API NC 40 51/4 213/16 2.688 285,359 711,611 23,288 23,487 p 1.01 14,092 11,354 10,828
14.00 X-95 IU 15.38 0.330 API NC 40 51/4 211/16 2.563 361,454 776,406 29,498 25,673 p 0.87 15,404 14,382 13,716
14.00 G-105 IU 15.89 0.330 API NC 40 51/2 29/16 2.438 399,502 838,257 32,603 28,102 p 0.86 16,861 15,896 15,159
4
14.00 G-105 IU 15.98 0.330 API NC 40 51/2 27/16 2.313 399,502 897,161 32,603 30,114 p 0.92 18,068 15,896 15,159
14.00 S-135 IU 15.89 0.330 API NC 40 51/2 29/16 2.438 513,646 838,257 41,918 28,102 p 0.67 16,861 20,137 19,491
14.00 S-135 IU 16.26 0.330 API NC 40 51/2 2 1.875 513,646 1,080,135 41,918 36,363 p 0.87 21,818 20,137 19,491
16.60 E-75 IEU 18.54 0.337 API NC 46 61/4 31/4 3.125 330,558 901,164 30,807 33,993 p 1.10 20,396 10,392 9,829
16.60 X-95 IEU 18.79 0.337 API NC 46 61/4 3 2.875 418,707 1,048,427 39,022 39,659 p 1.02 23,795 12,763 12,450
41/2 16.60 G-105 IEU 18.79 0.337 API NC 46 61/4 3 2.875 462,781 1,048,427 43,130 39,659 p 0.92 23,795 13,825 13,761
16.60 S-135 IEU 19.01 0.337 API NC 46 61/4 23/4 2.625 595,004 1,183,908 55,453 44,871 p 0.81 26,923 16,769 17,693
20.00 E-75 IEU 22.33 0.430 API NC 46 61/4 3 2.875 412,358 1,048,427 36,901 39,659 p 1.07 23,795 12,964 12,542
6
OMSCO 3/1/00 11:10 PM Page 7
20.00 X-95 IEU 22.83 0.430 API NC 46 61/4 23/4 2.625 522,320 1,183,908 46,741 44,871 p 0.96 26,923 16,421 15,886
20.00 G-105 IEU 22.62 0.430 API NC 46 61/4 3 2.875 577,301 1,048,427 51,661 39,659 p 0.77 23,795 18,149 17,558
41/2
20.00 G-105 IEU 23.03 0.430 API NC 46 61/4 21/2 2.375 577,301 1,307,608 51,661 49,630 p 0.96 29,778 18,149 17,558
20.00 S-135 IEU 23.20 0.430 API NC 46 61/4 21/4* 2.125 742,244 1,419,527 66,422 53,936 p 0.81 32,362 23,335 22,575
19.50 E-75 IEU 21.54 0.362 API NC 50 65/8 33/4 3.625 395,595 939,096 41,167 38,060 p 0.93 22,836 9,962 9,503
19.50 X-95 IEU 22.06 0.362 API NC 50 61/2 31/4 3.125 501,087 1,268,963 52,144 51,447 p 0.99 30,868 12,024 12,037
19.50 X-95 IEU 22.07 0.362 API NC 50 65/8 31/2 3.375 501,087 1,109,920 52,144 45,127 p 0.87 27,076 12,024 12,037
19.50 G-105 IEU 22.32 0.362 API NC 50 65/8 31/4 3.125 553,833 1,268,963 57,633 51,708 p 0.90 31,025 12,999 13,304
5
19.50 S-135 IEU 22.76 0.362 API NC 50 65/8 23/4 2.625 712,070 1,551,706 74,100 63,406 p 0.86 38,044 15,667 17,105
25.60 E-75 IEU 27.60 0.500 API NC 50 65/8 31/2 3.375 530,144 1,109,920 52,257 45,127 p 0.86 27,076 13,500 13,125
25.60 X-95 IEU 28.33 0.500 API NC 50 65/8 3 2.875 671,515 1,416,225 66,192 57,800 p 0.87 34,680 17,100 16,625
25.60 G-105 IEU 28.54 0.500 API NC 50 65/8 23/4 2.625 742,201 1,551,706 73,160 63,406 p 0.87 38,044 18,900 18,375
21.90 E-75 IEU 23.98 0.361 51/2 API FH 7 4 3.875 437,116 1,265,801 50,710 55,933 p 1.10 33,560 8,413 8,615
21.90 X-95 IEU 25.22 0.361 51/2 API FH 71/4 33/4 3.625 553,681 1,448,407 64,233 64,734 p 1.01 38,841 10,017 10,912
21.90 G-105 IEU 25.50 0.361 51/2 API FH 71/4 31/2 3.375 611,963 1,619,231 70,994 72,483 p 1.02 43,490 10,753 12,061
21.90 S-135 IEU 25.50 0.361 51/2 API FH 71/4 31/2 3.375 786,809 1,619,231 91,278 72,483 p 0.79 43,490 12,674 15,507
51/2 21.90 S-135 IEU 26.66 0.361 51/2 API FH 71/2 3 2.875 786,809 1,925,536 91,278 87,170 p 0.95 52,302 12,674 15,507
24.70 E-75 IEU 26.52 0.415 51/2 API FH 7 4 3.875 497,222 1,265,801 56,574 55,933 p 0.99 33,560 10,464 9,903
24.70 X-95 IEU 28.01 0.415 51/2 API FH 71/4 31/2 3.375 629,814 1,619,231 71,661 72,483 p 1.01 43,490 12,931 12,544
24.70 G-105 IEU 28.01 0.415 51/2 API FH 71/4 31/2 3.375 696,111 1,619,231 79,204 72,483 p 0.92 43,490 14,013 13,865
24.70 S-135 IEU 29.17 0.415 51/2 API FH 71/2 3 2.875 894,999 1,925,536 101,834 87,170 p 0.86 52,302 17,019 17,826
25.20 E-75 IEU 27.58 0.330 65/8 API FH 8 5 4.875 489,464 1,448,416 70,580 73,661 p 1.04 44,196 4,788 6,538
25.20 X-95 IEU 27.58 0.330 65/8 API FH 8 5 4.875 619,988 1,448,416 89,402 73,661 p 0.82 44,196 5,321 8,281
25.20 G-105 IEU 28.69 0.330 65/8 API FH 81/4 43/4 4.625 685,250 1,678,145 98,813 86,237 p 0.87 51,742 5,499 9,153
25.20 S-135 IEU 30.21 0.330 65/8 API FH 81/2 41/4 4.125 881,035 2,102,260 127,045 109,226 p 0.86 65,535 6,041 11,768
65/8 27.70 E-75 IEU 29.51 0.362 65/8 API FH 8 5 4.875 534,198 1,448,416 76,295 73,661 p 0.97 44,196 5,895 7,172
27.70 X-95 IEU 30.62 0.362 65/8 API FH 81/4 43/4 4.625 676,651 1,678,145 96,640 86,237 p 0.89 51,742 6,754 9,084
27.70 G-105 IEU 30.62 0.362 65/8 API FH 81/4 43/4 4.625 747,877 1,678,145 106,813 86,237 p 0.81 51,742 7,103 10,040
27.70 S-135 IEU 29.51 0.362 65/8 API FH 8 5 4.875 961,556 1,448,416 137,331 73,661 p 0.54 44,196 7,809 12,909
27.70 S-135 IEU 32.14 0.362 65/8 API FH 81/2 41/4 4.125 961,556 2,102,260 137,331 109,226 p 0.80 65,535 7,809 12,909
7
OMSCO 3/1/00 11:11 PM Page 8
TuffTorq TM
8
OMSCO 3/1/00 11:11 PM Page 9
Drill Collars
Typical Sizes, Bores and Connections For Drill Collars OMSCO Spiral Drill Collars
Drill Collar Outside Bore Total Length (Ft.) Bevel Diameter Approx. Weight
Connection Diameter + 1/16–0 ± 6 Ins. ± 1/64 of 31' Drill Collar Depth
Size & Style A B C D Collars (Lbs.) Diameter of Cut Pitch
NC-26 (23/8 I.F.) 31/2 11/2 or 13/4 30' 317/64 803 Up to 37/8 5
/32 36
NC-31 (27/8 I.F.) 41/8 2 30' 361/64 1045 4 - 43/8 3
/16 36
NC-35 43/4 21/4 31' 433/64 1452 41/2 - 51/8 7
/32 38
NC-38 (31/2 I.F.) 4 /4 or 5
3
21/4 31' 449/64** 1654 51/4 - 53/4 1
/4 42
NC-44 6 21/4 31' 511/16 2567 57/8 - 63/8 9
/32 42
NC-46 (4 I.F.) 61/4 213/16 31' 529/32 2585 61/2 - 7 5
/16 46
NC-46 (4 I.F.) 61/2 21/4 31' 63/32 3086 71/8 - 73/8 7
/32 64
NC-46 (4 I.F.) 61/2 213/16 31' 63/32 2849 71/2 - 75/8 1
/4 64
NC-50 (41/2 I.F.) 63/4 213/16 31' 619/64 3124 73/4 - 77/8 9
/32 64
NC-50 (41/2 I.F.) 7 213/16 31' 631/64 3409 8 - 87/8 5
/16 68
NC-50 (41/2 I.F.) 71/4 213/16 31' 643/64 3705 9 - 97/8 11
/32 72
65/8 API Reg 73/4 213/16 31' 721/64 4327 10 -107/8 11
/32 76
65/8 API Reg 8 213/16 31' 733/64 4654 11 - 12 11
/32 80
65/8 API Reg 81/4 213/16 31' 745/64 4991 All dimensions in inches unless noted otherwise.
75/8 API Reg 91/2 3 31' 813/16 6742 Spiralling decreases weight by approximately 6%.
75/8 API Reg 10 3 31' 91/4 7642*
85/8 API Reg 11 3 30' or 31' 101/2 8994*
* Low Torque Face All dimensions in inches unless noted otherwise.
**43/4" OD = 437/64" bevel; 5" OD = 449/64" bevel.
9
OMSCO 3/1/00 11:11 PM Page 10
10
OMSCO 3/1/00 11:11 PM Page 11
OMSCO’s Heavy-Weight Drill Pipe, placed • Three-point contact reduces drag, helps
between the drill collars and the more flexible increase RPMs without additional torque.
drill pipe, reduces fatigue in this stress-prone • Friction (inertia) welded construction.
area. • Bending ratios of section moduli meet all
industry standards.
For Tapered Drill Strings... • Special machining process maintains straight-
ness and concentricity.
OMSCO’s Heavy-Weight Drill Pipe lessens • Thread roots and recesses are cold rolled for
stress between stiff collars and standard drill durability.
pipe and helps improve bending ratios to • Extra long tool joints permit rethreading.
accepted industry standards. Bore-back and API relief groove are standard
on 41 /2 ” and larger sizes.
• Phos-coated connections help prevent galling
during make-up.
• Size availability:
27 /8 ”, 31 /2 ”, 4”, 41 /2 ”, 5”, 51 /2 ”, 65 /8 ”,
• Flush or raised hardbanding is available and
recommended on both tool joints and the
center wear pad. The pin and box tool joints
have 4” of hardbanding applied flush with the
O.D. plus 1” on the box taper with fingers on
sizes 41 /2 ” and larger to prevent fluid cutting.
The center pad has two (2) 3” bands onlaid to
the O.D. to prevent wear on the pipe section.
11
OMSCO 3/1/00 11:11 PM Page 12
Standard Heavy-Weight
Nominal Size* A 27/8 31/2 4 41/2 5 51/2 65/8
Tube Specifications
Inside Diameter (In.) B 21/8 21/4 29/16 23/4 3 4 4
Wall Thickness (In.) 0.375 0.625 0.719 0.875 1.000 0.750 1.313
Cross Sectional Area (In.2) 2.945 5.645 7.409 9.965 12.566 11.192 21.905
Center Upset Diameter (In.) D 33/8 4 41/2 5 51/2 6 71/8
Yield Strength (Lb./In.2) 55,000 55,000 55,000 55,000 55,000 55,000 55,000
Tensile Yield (Lb.) 161,975 310,478 407,502 548,061 691,150 615,560 1,204,775
Torsional Yield (Ft.-Lb.) 8,657 18,461 27,636 40,719 56,496 62,223 130,924
Tool Joint Specifications
Connection 27/8 SL-H90 NC38 NC40 NC46 NC50 51/2 FH 65/8 FH
Size & Type 31/2 IF 4 FH 4 IF 41/2 IF
Outside Diameter (In.) C 33/4 43/4 51/4 61/4 61/2 71/4 8
Inside Diameter (In.) 21/8 21/4 29/16 213/16 3 4 4
Yield Strength (Lb./In2.) 110,000 110,000 110,000 110,000 110,000 100,000 100,000
Tensile Yield (Lb.) 346,381 724,990 768,402 1,055,214 1,298,461 1,054,835 1,913,872
Torsional Yield (Ft.-Lb.) 9,952 17,576 25,446 39,976 52,237 47,043 73,214
Makeup Stress (Lb./In.2) 56,200 62,500 62,500 62,500 62,500 62,500 62,500
Makeup Torque (Ft.-lb.) 5,084 9,986 14,458 22,714 29,680 29,402 45,759
Engineering Data
Weight/Foot 12.5 23.7 29.9 40.8 50.0 46.7 83.4
Weight/30' Joint 376 720 912 1244 1516 1424 2501
Displacement (Gals./Jt.) 5.87 11.01 13.92 19.02 23.18 29.32 38.25
Displacement (Bbls./Jt.) 0.140 0.262 0.332 0.453 0.552 0.698 0.91
Capacity (Gals./Jt.) 5.62 6.2 8.04 9.264 11.025 19.6 30.59
Capacity (Bbls./Jt.) 0.134 0.147 0.191 0.22 0.262 0.466 0.728
* Sizes and dimensions shown are standard. Other sizes and options may be quoted on request.
12
OMSCO 3/1/00 11:11 PM Page 13
Directional-Wate ®
The no-wall stick design reduces the chances of differential sticking, mimimizes tube
wear, and provides more uniform bending through the length of the tube.
13
OMSCO 3/1/00 11:11 PM Page 14
Directional-Wate ®
Standard Directional-Wate®
Nominal Size* A 2/
7
8 31/2 4 41/2 5 51/2 65/8
Tube Specifications
Inside Diameter (In.) B 21/8 21/4 29/16 23/4 3 4 5
Wall Thickness (In.) 0.375 0.625 0.719 0.875 1.000 0.750 0.813
Cross Sectional Area (In.2) 2.945 5.645 7.409 9.965 12.566 11.192 14.837
Center Upset Diameter (In.) D 33/8 4 41/2 5 51/2 6 71/8
Yield Strength (Lb./In.2) 55,000 55,000 55,000 55,000 55,000 55,000 55,000
Tensile Yield (Lb.) 161,975 310,478 407,502 548,061 691,150 615,560 816,018
Torsional Yield (Ft.-Lb.) 8,657 18,461 27,636 40,719 56,496 62,223 102,002
Tool Joint Specifications
Connection 27/8 SL-H90 NC38 NC40 NC46 NC50 51/2 FH 65/8 FH
Size & Type 31/2 IF 4 FH 4 IF 41/2 IF
Outside Diameter (In.) C 33/4 43/4 51/4 61/4 61/2 71/4 8
Inside Diameter (In.) 21/8 21/4 29/16 213/16 3 4 5
Yield Strength (Lb./In.2) 110,000 110,000 110,000 110,000 110,000 100,000 100,000
Tensile Yield (Lb.) 346,381 724,990 768,402 1,055,214 1,298,461 1,054,835 1,207,013
Torsional Yield (Ft.-Lb.) 9,952 17,576 25,446 39,976 52,237 47,043 61,384
Makeup Stress (Lb./In.2) 56,200 62,500 62,500 62,500 62,500 62,500 62,500
Makeup Torque (Ft.-Lb.) 5,084 9,986 14,458 22,714 29,680 29,402 38,365
Engineering Data
Weight/Foot 16.8 32.3 37.5 50 59.1 56.2 66.9
Weight/30' Joint 504 970 1125 1500 1774 1687 2041
Displacement (Gals./Jt.) 7.87 14.84 17.22 22.96 27.17 25.82 31.22
Displacement (Bbls./Jt.) 0.19 0.353 0.409 0.546 0.646 0.614 0.74
Capacity (Gals./Jt.) 5.62 6.2 9.04 9.264 11.025 19.6 31.11
Capacity (Bbls./Jt.) 0.134 0.147 0.191 0.22 0.262 0.466 0.74
* Sizes and dimensions shown are standard. Other sizes and options may be quoted on request.
14
OMSCO 3/1/00 11:11 PM Page 15
Kellys
Features
• The finest quality 4145H Modified fully heat
treated alloy steel is used and has a Brinell hard-
ness range of 285-341 and a minimum average
Charpy impact value of 40 ft-lbs.
• Hardness and impact values guaranteed to one inch
below the surface
• Kelly ends and drive sections, I.D.s and connec-
tions machined and 100% inspected to API
specifications
• Kelly bars ultrasonically inspected over full length
and section
Our specially designed, rigid kelly mill ensures • Scabbards provided with each kelly. Rathole
absolute accuracy and unsurpassed quality. scabbards can be provided upon request.
15
OMSCO 3/1/00 11:11 PM Page 16
Kellys
16
OMSCO 3/1/00 11:11 PM Page 17
In 1947, OMSCO set the standard by which all other When ordering Kelly Valves, please specify:
upper kelly valves have been judged. This dependable,
proven flapper-type valve design has remained virtually 1. Working pressure
unchanged and unchallenged over the years due to its 2. Standard or stainless steel parts
simplicity of operation and field-servicing ease.
Below the valve body a special threaded sub offers
long wear and easy replacement should lower threads
become damaged, and, when removed, allows easy
access to the valve cavity for repair. The valve must be
manually closed. It can be partially opened by starting
up the mud pumps, but must be fully opened manually
to prevent mud cutting.
Features
• Proven flapper-type design for simple operation and
easy servicing
• Monel steel ram shafts to prevent corrosion and
sticking
• Sealed lubrication packing
• Complete stainless steel valve parts available
for H2S service
• Available in 5,000; 10,000; and 15,000 psi.
working pressure
• Complete with operating wrench and thread protectors
Valve Body 305 Lbs. 1 Part No. KV601S00 415 Lbs. 1 Part No. KV701S00 1 Part No. KV701SR0
Ram Shaft 2.13 Lbs. 1 Part No. KV604SA0 2.13 Lbs. 1 Part No. KV604SA0 1 Part No. KV604SA0
Junk Ring-Female 12 Lb. 2 Part No. KV610S00 .12 Lb. 2 Part No. KV610S00 2 Part No. KV610S00
Shaft Packing Set .05 Lb. 2 Part No. KV210000 .05 Lb. 2 Part No. KV210000 2 Part No. KV210000
Junk Ring-Male .29 Lb. 2 Part No. KV612S00 .29 Lb. 2 Part No. KV612S00 2 Part No. KV612S00
Ram Body 3.30 Lbs. 1 Part No. KV613S00 3.30 Lbs. 1 Part No. KV613S00 1 Part No. KV613SR0
Ram Key .06 Lb. 1 Part No. KV614S00 .06 Lb. 1 Part No. KV614S00 1 Part No. KV614S00
Ram Rubber .55 Lb. 1 Part No. KV616S00 .55 Lb. 1 Part No. KV616SP0 1 Part No. KV616SR0
Retainer Plate 2.25 Lbs. 1 Part No. KV617S00 2.25 Lbs. 1 Part No. KV617S00 1 Part No. KV617SR0
Retainer Plate Screw .08 Lb. 4 Part No. KV618S00 .08 Lb. 4 Part No. KV618S00 4 Part No. KV618SR0
Wrench 6.0 Lbs. 1 Part No. KV622S00 6.0 Lbs. 1 Part No. KV622S00 1 Part No. KV622S00
Shaft Spacer .16 Lb. 2 Part No. KV626S00 .16 Lb. 2 Part No. KV626S00 2 Part No. KV626S00
Friction Ring .08 Lb. 2 Part No. KV627S00 .08 Lb. 2 Part No. KV627S00 2 Part No. KV627S00
Blind Nut Set .38 Lb. 2 Part No. KV633SAS .38 Lb. 2 Part No. KV633SAS 2 Part No. KV633SAS
Shaft Cap Screw .11 Lb. 2 Part No. KV634S00 .11 Lb. 2 Part No. KV634S00 2 Part No. KV634S00
Shaft Washer .09 Lb. 2 Part No. KV4SP600 .09 Lb. 2 Part No. KV4SP600 2 Part No. KV4SP600
Blind Nut Key .02 Lb. 2 Part No. KV635S00 .02 Lb. 2 Part No. KV635S00 2 Part No. KV635S00
Lower Sub 168 Lbs. 1 Part No. KV632S00 193 Lbs. 1 Part No. KV632SA0 1 Part No. KV632SA0
Complete Valve Kit 13 Lbs. 1 Part No. KV636S00 13 Lbs. 1 Part No. KV636SP0 1 Part No. KV636SR0
Dimension A 26 27 27
Dimension B 8 1/ 2 11 11
Dimension C 13 1/ 2 14 1 / 2 14 1/ 2
Dimension D 3 3 3
Dimension E 8 9 9
Total Weight 515 Lbs. 720 Lbs. 650 Lbs.
All dimensions in inches unless noted otherwise.
17
OMSCO 3/1/00 11:11 PM Page 18
Features
• Self-lubricating, ball-type valve
• Stainless steel ball and non-corrosive seat are standard
• Two piece design with fewer replacement parts for easy, economical
repair
18
OMSCO 3/1/00 11:11 PM Page 19
The OMSCO Single Piece Kelly Valve series is When ordering Single Piece Kelly Valves,
an alternative to the standard valve where length or please specify:
working space is a problem. When this valve is
1. Upper or Lower
removed from the string, the internal parts are acces-
2. Size and working pressure
sible for easy field repair.
The smooth outside diameter permits this valve to
be run anywhere in the string. A tool kit with instruc-
tions is available for assembly and disassembly.
This compact valve, with a maximum overall
length of 24”, is an excellent choice when special
space requirements exist.
Features
• Compact size
• Ready access to internal parts for easy field repair
• Adaptable for use anywhere in the string
• Complete with operating wrench and thread
protectors
Single Piece Upper Kelly Single Piece Lower Kelly Valve Specifications
Valve Specifications Complete Valve LKSP5001 LKSP6300 LKSP65M0
Complete Valve KVSP80 Test Pressure 15,000 psi 15,000 psi 22,500 psi
Working Pressure 10,000 psi 10,000 psi 15,000 psi
Test Pressure 22,500 psi
OD 5 63/8 61/2
Working Pressure 15,000 psi
ID 13/4 23/4 29/16
OD 8
Length 17 24 24
ID 3
Approximate Weight 63 Lbs. 145 Lbs. 150 Lbs.
Length 24
Wrench-Hex LK841002 LK841000 LK841000
Approximate Weight 232 Lbs.
Valve Body LK552001 LK852M00 LK852HM0
Valve Body KV-680M
Stem (1) LK81700P LK83700P LK83700P
Stem KV68100P
Stem “O” Rings (set) (1) LK818A&B LK818A&B LK818A&B
Stem “O” Rings (Set) LK818A&B
Spring (1) LK533000 LK833000 LK833000
Spring LK843000
Seat (Lower) (1) LK534000 LK834000 LK834H00
Seat (Lower) LK844000
Lower Seat “O” Ring (1) LK535000 LK835000 LK835000
Seat Teflon “O” Ring LK821000
Seat Teflon “O” Ring (2) LK421000 LK621000 LK621000
Lower Seat “O” Ring LK845000
Ball (1) LK536000 LK836000 LK836H00
Ball LK846000
Seat (Upper) (1) LK554000 LK854000 LK854H00
Seat (Upper) KV687000
Upper Seat “O” Ring (1) LK555000 LK855000 LK855000
Upper Seat “O” Ring KV688
Upper Seat Retainer (1) LK556000 LK856M00 LK856M00
Upper Seat Retainer (4 Piece) KV689M
Retaining Funnel (1) LK557000 LK857M00 LK857MH0
Retaining Funnel KV691VM
Snap Ring (1) LK561000 LK895000 LK895000
Snap Ring KV695V00
Retaining Funnel “O” Ring “A” LK560000 LK689000 LK689000
Wrench LK841000
Retaining Funnel “O” Ring “B” LK555000 LK855000 LK855000
Retaining Funnel “O” Ring “A” KV693V
Complete Valve Kit (1) LK559000 LK859000 LK859H00
Retaining Funnel “O” Ring “B” KV694V
Assembly & Disassembly Tool Kit (1) SPTK4 SPTK1 SPTK3
Complete Valve Kit KV686000
Available Connections 31/2 IF 41/2 XH or 41/2 IF
Assembly & Disassembly Tool Kit SPTK2
All dimensions in inches unless noted otherwise.
All dimensions in inches unless noted otherwise.
19
OMSCO 3/1/00 11:11 PM Page 20
OMSCO’s Reverse Flow Check Valves are the When ordering Reverse Flow Check Valves,
most reliable, first line of defense in protecting your please specify:
swivel, standpipe, pumps and crew from the dangers
1. Size and working pressure
of drillstring kicks. It is specifically designed to be
2. H2S service, if required
run through most BOP stacks as an integral part of the
3. Floor stabbing release assembly requirement
string when drilling through transitional zones or any-
time a kick might be anticipated.
The unique top vent on the valve permits a partial
flow-by of drilling fluids to make emergency stabbing
faster and safer. (Order optional floor stabbing release
assembly).
The body of the valve is made from AISI 4145H
modified fully heat treated steel alloy with a dart and
seat specially designed to minimize the effects of mud
cutting and washouts.
Features
• Specifically designed to be run through most BOP
stacks as an integral part of the string
• Unique top vent permits partial flow-by of drilling
fluids for faster and safer emergency stabbing
• Dart and seat specially designed to minimize effects
of mud cutting and washout
• Can be run as deep as necessary in controlling a kick
• Safety both on the rig floor and down hole
• Can be supplied with parts suitable for H2S service
Complete Valve IB475000 IB475500 IB525000 IB525500 IB625000 IB637500 IB650001 IB650000
31/2 IF, 31/2 IF, 4 FH, 4 FH, 41/2 XH, 41/2 IF, 41/2 XH, 41/2 IF,
10,000 Lbs. 15,000 Lbs. 10,000 Lbs. 15,000 Lbs. 10,000 Lbs. 10,000 Lbs. 10,000 Lbs. 10,000 Lbs.
Size & Working Pressure W.P. W.P. W.P. W.P. W.P. W.P. W.P. W.P.
Approx. Wt. - Lbs. Complete
With Release Assembly 93 93 115 115 151 169 178 178
O.D. 43/4 43/4 51/4 51/4 61/4 63/8 61/2 61/2
I.D. 2 2 2 2 21/4 21/4 21/4 21/4
Length 261/2 261/2 261/2 261/2 271/2 271/2 271/2 271/2
Rod Lock Screw (1) IB403000 IB403000 IB403000 IB403000 IB403000 IB403000 IB403000 IB403000
Release Rod (1) IB404000 IB404000 IB404000 IB404000 IB404000 IB404000 IB404000 IB404000
Release Cap (1) IB305000 IB305000 IB306000 IB306000 IB405000 IB406000 IB405000 IB406000
Upper Sub (1) IB307000 IB307000 IB308000 IB308000 IB407000 IB408000 IB417000 IB418000
Dart Seat (1) IB309A00 IB309A00 IB309A00 IB309A00 IB419000 IB419000 IB419000 IB419000
Dart “O” Ring (1) IB310000 IB310000 IB310000 IB310000 IB410000 IB410000 IB410000 IB410000
Dart Valve (1) IB311001 IB311001 IB311001 IB311001 IB421001 IB421001 IB421001 IB421001
Spring (1) IB312000 IB312A00 IB312000 IB312A00 IB412000 IB412000 IB412000 IB412000
Lower Sub (1) IB313000 IB313000 IB314000 IB314000 IB413000 IB414000 IB423000 IB424000
All dimensions in inches unless noted otherwise.
20
OMSCO 3/1/00 11:11 PM Page 21
Rotary Subs
OMSCO Rotary Subs are available in virtually On orders for Rotary Subs, please specify:
any size and configuration our customers may require. 1. Class of sub
Sizes shown here are the most frequently specified. 2. Overall length
Please inquire about our ability to meet your special 3. Largest diameter
requirements. 4. Bore
5. Size and type of upper and lower connections and
All OMSCO Rotary Subs are made from AISI
any special features
4145H modified alloy heat treated to a Brinell
Hardness range of 285-341. All connections are cold Additional information required for ordering:
rolled after machining and phos-coated to prevent • Bit subs
galling during initial make-up. Subs are shipped with 1. Float bore size & type
• Kelly Saver Subs
thread protectors installed.
1. Casing OD & weight
2. Rubber type (pin or stretch-on)
Lift Sub On orders for Lift Subs, On orders for Lift Plugs,
please specify: please specify:
Drill Collar Approximate
Size A Weight (Lbs.) 1. Drill collar OD (A) 1. Drill collar OD (A)
31/2 - 37/8 40 2. Tool Joint OD (B) 2. Lifting plate diameter
4 - 43/8 50
3. Tapered or square (B) (Drill collar OD
41/2- 47/8 84
5 - 53/8 88 shoulder plus approximately 2”)
51/2 - 57/8 120 4. Drill pipe OD (C) 3. Bore (C)
6 - 63/8 150 5. Drill collar connection 4. Drill collar connection
61/2 - 67/8 168 size & type (D) size & type
7 - 73/8 169
71/2 - 77/8 242
6. Bore (E)
8 - 83/8 257
81/2 - 87/8 280
9 - 93/8 305
91/2 - 97/8 320
10 338
11 368
All dimensions in inches unless noted
otherwise.
Lift Plug
21
OMSCO 3/1/00 11:11 PM Page 22
22
OMSCO 3/1/00 11:11 PM Page 23
Hardbanding
Hardbanding
OMSCO Mesh Type Description
Series Size
F-1000 40-60 Fine Pellet––Flush Five continuous bands of high density hardfacing extending 3-3/4”
over wear area including 3/4” on tapered shoulder.
R-1000 40-60 Fine Pellet––Raised Same as F-1000 except wear surface raised 1/32” above
tool joint surface.
F-3000 30-40 Standard Pellet––Flush Same coverage as F-1000 but uses standard particles of
tungsten carbide.
R-3000 30-40 Standard Pellet––Raised Same coverage as R-1000 but uses standard particles of
tungsten carbide.
F-5000 14-24 Large Pellet––Flush Same as F-1000 but uses large particles of tungsten carbide.
R-5000 14-24 Large Pellet––Raised Same as R-1000 but uses large particles of tungsten carbide.
S-5000 14-24 Large Pellet––Flush Same as F-5000 with hard metal overlay.
23
OMSCO 3/1/00 11:11 PM Page 24
831
OMSCO INDUSTRIES
A SHAW
INDUSTRIES
2/00 COMPANY Printed in U.S,A.